Dodge 2010 Charger manuale d’uso

Charger OWNER’ S MANUAL 2010[...]

T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION ............................................................ 3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE .............................. 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ............................. 8 3 4 UNDERST ANDING YOUR INSTRUMENT P ANEL .................................. 1 [...]

[...]

INTRODUCTION CONTENTS 䡵 Introduction ........................... 4 䡵 How T o Use This Manual .................. 4 䡵 W arnings And Cautions ................... 6 䡵 V ehicle Identification Number .............. 6 䡵 V ehicle Modifications/Alterations ............ 7 1[...]

INTRODUCTION Congratulations on selecting your new Chrysler Group LLC vehicle. Be assured that it r epresents pr ecision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles. This Owner’s Manual has been prepar ed with the assis- tance of service and engineering specialists to acquaint you with [...]

1 INTRODUCTION 5[...]

W ARNINGS AND CAUTIONS This Owner’s Manual contains W ARNINGS against op- erating procedur es that could result in an accident or bodily injury . It also contains CAUTIONS against proce- dures that could r esult in damage to your vehicle. If you do not read this entir e manual, you may miss important information. Observe all W arnings and Caution[...]

VEHICLE MODIFICA TIONS/AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death. 1 INTRODUCTION 7[...]

[...]

THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS 䡵 A W or d About Y our Keys ................. 1 2 ▫ W ireless Ignition Node (WIN) ............ 1 2 ▫ K e y F O B ........................... 1 3 ▫ Removing Key FOB From Ignition ......... 1 4 ▫ Key-In-Ignition Reminder ............... 1 5 䡵 Sentry Key 威 .......................... [...]

▫ Using The Panic Alarm ................. 2 4 ▫ Programming Additional T ransmitters ...... 2 4 ▫ T ransmitter Battery Replacement .......... 2 4 ▫ General Information ................... 2 6 䡵 Remote Starting System — If Equipped ....... 2 6 ▫ How T o Use Remote Start ............... 2 7 䡵 Door Locks ........................... 2 9[...]

▫ Supplemental Restraint System (SRS) - Airbags ............................ 5 2 ▫ Airbag Deployment Sensors And Controls . . . 58 ▫ Event Data Recorder (EDR) .............. 6 5 ▫ Child Restraints ...................... 6 7 䡵 Engine Break-In Recommendations .......... 7 7 䡵 Safety T ips ........................... 7 7 ▫ T ransporting [...]

A WORD ABOUT YOUR KEYS Y our vehicle uses a keyless ignition system. This system consists of a Key Fob with Remote Keyless Entry (RKE) transmitter and a W ireless Ignition Node (WIN) with integral ignition switch. Y ou can insert the Key Fob into the ignition switch with either side up. Wireless Ignition Node (WIN) The W ireless Ignition Node (WIN)[...]

Key Fob The Key Fob operates the ignition switch. It also contains the Remote Keyless Entry (RKE) transmitter and an emergency key , which stores in the r ear of the Key Fob. The emergency key allows for entry into the vehicle should the battery in the vehicle or the Key Fob go dead. The emergency key is also for locking the glove box. Y ou can kee[...]

Removing Key Fob From Ignition Place the shift lever in P ARK. T urn the key to the LOCK position and then remove the Key Fob. NOTE: • For vehicles not equipped with the Electronic V ehicle Information Center (EVIC), the power window switches, radio, power sunroof (if equipped), and power outlets will remain active for 10 minutes after the igniti[...]

Key-In-Ignition Reminder Opening the driver’s door when the Key Fob is in the ignition and the ignition switch position is OFF or ACC, sounds a signal to remind you to r emove the Key Fob. NOTE: The Key-In-Ignition reminder only sounds when the Key Fob is placed in the LOCK or ACC ignition position. SENTR Y KEY 姞 The Sentry Key 威 Immobilizer [...]

CAUTION! The Sentry Key 威 Immobilizer system is not compat- ible with some after-market remote starting systems. Use of these systems may result in vehicle starting problems and loss of security protection. All of the Key Fobs provided with your new vehicle have been programmed to the vehicle electr onics. Replacement Keys NOTE: Only Key Fobs tha[...]

NOTE: When having the Sentry Key 威 Immobilizer System serviced, bring all vehicle Key Fobs with you to the authorized dealer . Customer Key Programming Programming Key Fobs or RKE transmitters may be performed at an authorized dealer . General Information The Sentry Key 威 system complies with FCC rules Part 15 and with RSS-210 of Industry Canad[...]

T o Arm the System Remove the key from the ignition switch and either pr ess a power door LOCK switch while the driver or passenger door is open or press the LOCK button on the Remote Keyless Entry (RKE) transmitter . After the last door is closed, or if all doors are closed, the V ehicle Security Alarm will arm itself in about 16 seconds. During t[...]

vehicle and open a door , the alarm will sound. If this occurs, disarm the V ehicle Security Alarm. If the V ehicle Security Alarm is armed and the battery becomes disconnected the V ehicle Security Alarm will remain armed when the battery is r econnected. The exterior lights will flash, the horn will sound, and the ignition will not start the vehi[...]

REMOTE KEYLESS ENTR Y (RKE) The RKE system allows you to lock or unlock the doors, open the trunk, or activate the Panic Alarm from dis- tances up to approximately 66 ft (20 m) using a hand-held Key Fob with RKE transmitter . The RKE transmitter does not need to be pointed at the vehicle to activate the system. NOTE: Inserting the Key Fob with RKE [...]

Remote Key Unlock, Driver Door/All Doors 1st Press This feature lets you pr ogram the system to unlock either the driver’s door or all doors on the first press of the UNLOCK button on the RKE transmitter . T o change the current setting, pr oceed as follows: • For vehicles equipped with the Electronic V ehicle Information Center (EVIC), refer t[...]

Flash Lights with Remote Key Lock This feature will cause the turn signal lights to flash when the doors are locked or unlocked with the RKE transmit- ter . This feature can be turned on or turned of f. T o change the current setting, pr oceed as follows: • For vehicles equipped with the EVIC, refer to “Elec- tronic V ehicle Information Center [...]

Information Center (EVIC — If Equipped)/Personal Set- tings (Customer-Pr ogrammable Features)” in “Under - standing Y our Instrument Panel” for further information. T o Lock the Doors Press and r elease the LOCK button on the RKE transmit- ter to lock all doors. The turn signal lights will flash and the horn will chirp to acknowledge the si[...]

alarm. Opening a door with the security alarm activated will cause the alarm to sound. Press the UNLOCK button to deactivate the security alarm. T o Unlatch the T runk Press the TRUNK button on the RKE transmitter two times within five seconds to unlatch the trunk. Using the Panic Alarm T o turn the Panic Alarm featur e on or off, pr ess and hold t[...]

NOTE: • Do not touch the battery terminals that are on the back housing or the printed circuit boar d. 1. Battery access is through a door located on the rear of the RKE transmitter . Insert a small, flat blade screwdriver into the slot and gently pry open the access door . 2. Remove and replace the battery . A void touching the new battery with [...]

3. Reposition the access door panel over the battery opening and snap into place. General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference r eceived, includi[...]

How to Use Remote Start All of the following conditions must be met before the engine will remote start: • Shift lever in P ARK • Doors closed • Hood closed • T runk closed • Hazard switch of f • Brake switch inactive (brake pedal not pressed) • Ignition key removed fr om ignition switch • Battery at an acceptable charge level • R[...]

NOTE: • The park lamps will turn on and remain on during Remote Start mode. • For security , power window and power sunroof op- eration (if equipped) are disabled when the vehicle is in the Remote Start mode. • The engine can be started two consecutive times (two 15-minute cycles) with the RKE transmitter . However , the ignition switch must [...]

DOOR LOCKS Manual Door Locks T o lock each door , push the door lock plunger on each door trim panel downward. T o unlock each door , pull the door lock plunger on each door trim panel upward. If the door lock plunger is down when you shut the door , the door will lock. Therefor e, make sure the key is not inside the vehicle before closing the door[...]

Power Door Locks A power door lock switch is on each front door trim panel. Use this switch to lock or unlock the doors. If you press the power door lock switch while the Key Fob is in the ignition, and any front door is open, the power locks will not operate. This prevents you fr om accidentally locking the Key Fob in the vehicle. Remov- ing the K[...]

Automatic Door Locks Programming The Automatic Door Locks feature can be enabled or disabled as follows: • For vehicles equipped with the Electronic V ehicle Information Center (EVIC), refer to “Electr onic V ehicle Information Center (EVIC) — If Equipped/Personal Settings (Customer-Pr ogrammable Features)” in “Un- derstanding Y our Instr[...]

4. The driver door is opened. 5. The doors were not previously unlocked. 6. The vehicle speed is 0 mph (0 km/h). Automatic Unlock Doors on Exit Programming The Automatic Unlock Doors On Exit feature can be enabled or disabled as follows: • For vehicles equipped with the EVIC, refer to “Elec- tronic V ehicle Information Center (EVIC) — If Equi[...]

Child Protection Door Lock T o provide a safer environment for small childr en riding in the rear seats, the r ear doors are equipped with a Child Protection Door Lock system. T o Engage the Child Protection Door Lock System 1. Open the rear door . 2. Insert the tip of the emergency key (or similar object) into the child lock control and pull it up[...]

W ARNING! A void trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the child protection locks are engaged. Failure to follow this warning may result in serious injury or death. NOTE: • After engaging the Child Protection Door Lock sys- tem, always test the door from the inside to ma[...]

3. Repeat Steps 1 and 2 for the opposite rear door . NOTE: After disengaging the Child Protection Door Lock system, always test the door from the inside to make certain it is in the desired position. WINDOWS Power Windows The window controls on the driver’s door contr ol all the door windows. There ar e single window controls on each passenger do[...]

NOTE: • For vehicles not equipped with the Electronic V ehicle Information Center (EVIC), the power window switches will remain active for 10 minutes after the ignition switch is turned to the OFF position. Opening either front door will cancel this featur e. • For vehicles equipped with the EVIC, the power window switches will remain active fo[...]

T o open the window part way , press the window switch to the first detent and release it when you want the window to stop. T o stop the window from going all the way down during the AUTO-down operation, pull up on the switch briefly . AUTO-Up Feature with Anti–Pinch Protection — If Equipped Lift the window switch to the second detent, release,[...]

W indow Lockout Switch The window lockout switch on the driver’s door trim panel allows you to disable the window controls on the passenger doors. T o disable the window controls, press and release the window lockout button (setting it in the DOWN position). T o enable the window controls, press and release the window lockout button again (settin[...]

1. Pull the window switch up to close window com- pletely and continue to hold the switch up for an additional two seconds after the window is closed. Wind Buffeting W ind buffeting can be described as the perception of pressur e on the ears or a helicopter-type sound in the ears. Y our vehicle may exhibit wind buffeting with the windows down, or t[...]

W ith the ignition switch in the OFF position or the key removed fr om the ignition switch, the T runk Open sym- bol will display until the trunk is closed. TRUNK SAFETY W ARNING W ARNING! Do not allow children to have access to the trunk, either by climbing into the trunk from outside, or through the inside of the vehicle. Always close the trunk l[...]

OCCUP ANT RESTRAINTS Some of the most important safety features in your vehicle are the r estraint systems: • Three-point lap and shoulder belts for the driver and all passengers • Advanced Front Airbags for driver and front passen- ger • Supplemental Side Airbag Inflatable Curtains (SABIC) for the driver and passengers seated next to a windo[...]

W ARNING! In a collision, you and your passengers can suffer much greater injuries if you are not properly buckled up. Y ou can strike the interior of your vehicle or other passengers, or you can be thrown out of the vehicle. Always be sure you and others in your vehicle are buckled up properly . Buckle up even though you are an excellent driver , [...]

W ARNING! • It is dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. • Be sure everyone in your vehicle is in a seat and using[...]

2. The seat belt latch plate is above the back of your seat. Grasp the latch plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to make the belt go around your lap. 3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” Pulling Out the Lap/Shoulder Belt Latch P[...]

W ARNING! • A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you properly . In a sudden stop, you could move too far forward, increasi[...]

4. Position the lap belt across your thighs, below your abdomen. T o remove slack in the lap belt portion, pull up a bit on the shoulder belt. T o loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt. A snug belt reduces the risk of sliding under the belt in a collision. W ARNING! • A lap belt worn too high can in[...]

6. T o release the belt, push the r ed button on the buckle. The belt will automatically retract to its stowed position. If necessary , slide the latch plate down the webbing to allow the belt to retract fully . W ARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection. Inspect the belt system periodically , ch[...]

As a guide, if you are shorter than average you will prefer a lower position, and if you ar e taller than average you will prefer a higher position. When you r elease the anchorage try to move it up and down to make sure that it is locked in position. In the rear seat, move towar d the center of the seat to position the belt away from your neck. La[...]

How T o Engage The Automatic Locking Mode 1. Buckle the combination lap and shoulder belt. 2. Grasp the shoulder portion and pull downward until the entire belt is extracted. 3. Allow the belt to retract. As the belt retracts, you will hear a clicking sound. This indicates the safety belt is now in the Automatic Locking Mode. How T o Disengage The [...]

other occupants to buckle their seat belts. Once the warning is triggered, BeltAlert 威 will continue to chime and flash the Seat Belt Reminder Light for 96 seconds or until the driver ’s or front passenger ’s seat belt is buckled. BeltAlert 威 will be reactivated if the driver ’s or passen- ger ’s seat belt is unbuckled for more than 10 [...]

3. W ithin 60 seconds of turning the ignition switch to the ON position, unbuckle and then re-buckle the driver’s seat belt at least three times within 10 seconds, ending with the seat belt buckled. NOTE: W atch for the Seat Belt Reminder Light to turn on while unbuckling the seat belt and turn off while re-buckling the seat belt. It may be neces[...]

W ARNING! Using a seat belt extender when not needed can increase the risk of injury in a collision. Only use when the seat belt is not long enough when it is worn low and snug and in the recommended seating posi- tions. Remove and store the extender when not needed. Supplemental Restraint System (SRS) - Airbags This vehicle has Advanced Front Airb[...]

The Advanced Fr ont Airbags have a multistage inflator design. This allows the airbag to have differ ent rates of inflation based on the severity and type of collision. This vehicle may be equipped with driver and/or front passenger seat track position sensors that may adjust the inflation rate of the Advanced Front Airbags based upon seat position[...]

• Supplemental Side Airbag Inflatable Curtains (SABIC) • Front and Side Impact Sensors • Front Seat Belt Pr etensioners, Seat Belt Buckle Switch, and Seat T rack Position Sensors Advanced Front Airbag Features The Advanced Front Airbag system has multistage driver and front passenger airbags. This system pr ovides output appropriate to the se[...]

Supplemental Side Airbag Inflatable Curtain (SABIC) — If Equipped SABIC airbags may offer side-impact and vehicle r ollover protection to fr ont and rear seat outboar d occupants in addition to that provided by the body str ucture. Each airbag features inflated chambers placed adjacent to the head of each outboard occupant that r educe the potent[...]

The system includes side impact sensors adjacent to both front and r ear seat occupants that are calibrated to deploy the SABIC airbags during impacts that requir e airbag occupant protection. W ARNING! • If your vehicle is equipped with left and right Supplemental Side Airbag Inflatable Curtain (SABIC), do not stack luggage or other cargo up hig[...]

W ARNING! Infants in rear-facing child restraints should NEVER ride in the front seat of a vehicle with a passenger Advanced Front Airbag. An airbag deployment can cause severe injury or death to infants in that posi- tion. Children that ar e not big enough to wear the vehicle seat belt properly (see Section on Child Restraints) should be secured i[...]

If the airbag system in this vehicle needs to be modified to accommodate a disabled person, contact the Customer Center . Phone numbers are pr ovided under ⬙ If Y ou Need Assistance”. W ARNING! • Relying on the airbags alone could lead to more severe injuries in a collision. The airbags work with your seat belt to restrain you properly . In s[...]

Advanced Front Airbags ar e designed to provide addi- tional protection by supplementing the seat belts in certain frontal collisions depending on the severity and type of collision. Advanced Front Airbags are not ex- pected to reduce the risk of injury in r ear , side, or rollover collisions. The Advanced Front Airbags will not deploy in all front[...]

Also, the ORC turns on the Airbag W arning Light in the instrument panel for appr oxi- mately six to eight seconds for a self-check when the ignition is first turned on. After the self-check, the Airbag W arning Light will turn off. If the ORC detects a malfunction in any part of the system, it turns on the Airbag W arning Light, either momentarily[...]

separate and fold out of the way as the airbags inflate to their full size. The airbags fully inflate in about 50 to 70 milliseconds. This is about half of the time it takes to blink your eyes. The airbags then quickly deflate while helping to restrain the driver and fr ont passenger . The Advanced Front Airbag gas is vented through the vent holes [...]

Enhanced Accident Response System In the event of an impact causing airbag deployment, if the communication network remains intact, and the power remains intact, depending on the natur e of the event the ORC will determine whether to have the Enhanced Accident Response System perform the follow- ing functions: • Cut off fuel to the engine. • Fl[...]

airbag inflation. These airborne particles may irritate the skin, eyes, nose, or throat. If you have skin or eye irritation, rinse the area with cool water . For nose or throat irritation, move to fr esh air . If the irritation continues, see your doctor . If these particles settle on your clothing, follow the garment manufacturer’s in- struction[...]

W ARNING! (Continued) • Do not attempt to modify any part of your ad- vanced airbag system. The airbag may inflate accidentally or may not function properly if modi- fications are made. T ake your vehicle to an autho- rized dealer for any advanced airbag system ser- vice. If your seat, including your trim cover and cushion, needs to be serviced i[...]

check the fuse block for blown fuses. Refer to the label located on the inside of the fuse block cover for the proper airbag fuses. See your authorized dealer if the fuse is good. Event Data Recorder (EDR) In the event of a collision, your vehicle is designed to recor d up to five seconds of specific vehicle data param- eters (see list below) in an[...]

In the event that an investigation is undertaken by Chrysler Group LLC (r egardless of initiative), the com- pany or its designated repr esentative will first obtain permission of the appropriate custodial entity for the vehicle (usually the vehicle owner or lessee) before accessing the electronic data stor ed, unless order ed to image the data by [...]

• Pedal position • And other parameters depending on vehicle configuration Child Restraints Everyone in your vehicle needs to be buckled up all the time, including babies and children. Every state in the United States and all Canadian provinces r equire that small children ride in pr oper restraint systems. This is the law , and you can be pros[...]

Infants and Child Restraints • Safety experts recommend that childr en ride rearwar d-facing in the vehicle until they are at least one year old and weigh at least 20 lbs (9 kg). T wo types of child restraints can be used r earward-facing, infant carriers and convertible child seats. • The infant carrier is only used rearwar d-facing in the veh[...]

restraint anchorage system. Refer to “LA TCH — Child Seat Anchorage System (Lower Anchors and T ether for CHildren)”. The belt-positioning booster seat is for children weighing more than 40 lbs (18 kg), but who ar e still too small to fit the vehicle’s seat belts properly . If the child cannot sit with knees bent over the vehicle’s seat c[...]

W ARNING! • Improper installation can lead to failure of an infant or child restraint. It could come loose in a collision. The child could be badly injured or killed. Follow the manufacturer’s directions ex- actly when installing an infant or child restraint. • A rearward-facing child restraint should only be used in a rear seat. A rearward-f[...]

• When your child restraint is not in use, secur e it in the vehicle with the seat belt or remove it fr om the vehicle. Do not leave it loose in the vehicle. In a sudden stop or collision, it could strike the occupants or seatbacks and cause serious personal injury . LA TCH — Child Seat Anchorage System (Lower Anchors and T ether for CHildren) [...]

All three r ear-seating positions have lower anchorages that are capable of accommodating LA TCH-compatible child seats. Y ou should NEVER install LA TCH- compatible child seats so that two seats share a common lower anchorage. If installing child seats in adjacent rear -seating positions, or if your child restraints ar e not LA TCH-compatible, ins[...]

Again, carefully follow the installation instr uctions that are pr ovided with the child restraint system. The rear seat lower anchorages ar e round bars located at the rear of the seat cushion wher e it meets the seatback and are just visible when you lean into the rear seat to install the child restraint. Y ou will easily feel them if you run you[...]

NOTE: • Ensure that the tether strap does not slip into the opening between the seatbacks as you remove slack in the strap. • When using the LA TCH attaching system to install a child restraint, please ensur e that all seat belts not being used for occupant restraints ar e stowed and out of reach of childr en. It is recommended that befor e ins[...]

The seat belt must be in the Automatic Locking Mode in order to enable a child r estraint to be tightly installed. Refer to “Automatic Locking Mode”. A locking clip should not be necessary once the automatic locking feature is enabled. Position the shoulder and lap belt on the child restraint. The automatic locking r etractor is activated by fi[...]

T o attach a child restraint tether strap: 1. Rotate the cover over the anchor directly behind the seat where you ar e placing the child restraint. 2. Route the tether strap to provide the most dir ect path for the strap between the anchor and the child seat. 3. Attach the tether strap hook (A) of the child restraint to the anchor (B) and remove sl[...]

T ransporting Pets Airbags deploying in the front seat could harm your pet. An unrestrained pet will be thr own about and possibly injured, or injur e a passenger during panic braking or in a collision. Pets should be restrained in the r ear seat in pet harnesses or pet carriers that are secur ed by seat belts. ENGINE BREAK-IN RECOMMENDA TIONS A lo[...]

W ARNING! • Do not leave children or animals inside parked vehicles in hot weather . Interior heat build-up may cause serious injury or death. • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seri- ously injured or killed. • Do not allow peo[...]

If you are r equired to drive with the tr unk/liftgate open, make sure that all windows ar e closed and the climate control BLOWER switch is set at high speed. DO NOT use the recir culation mode. The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system. Whenever a change is noticed in th[...]

Defroster Check operation by selecting the defrost mode and place the blower control on high speed. Y ou should be able to feel the air directed against the windshield. See your authorized dealer for service if your defroster is inoperable. Floor Mat Safety Information Always use floor mats designed to fit the foot well of your vehicle. Use only fl[...]

W ARNING! (Continued) • Check mounting of mats on a regular basis. Al- ways properly reinstall and secure floor mats that have been removed for cleaning. • Always make sure that objects cannot fall into the driver foot well while the vehicle is moving. Objects can become trapped under the brake pedal and accelerator pedal causing a loss of vehi[...]

Door Latches Check for positive closing, latching, and locking. Fluid Leaks Check area under vehicle after overnight parking for fuel, engine coolant, oil, or other fluid leaks. Also, if gasoline fumes are detected or if fuel, power steering fluid, or brake fluid leaks are suspected, the cause should be located and corrected immediately . 82 THINGS[...]

UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors .............................. 8 7 ▫ Inside Day/Night Mirror ................ 8 7 ▫ Automatic Dimming Mirror — If Equipped . . . 88 ▫ Outside Mirrors ...................... 8 8 ▫ Outside Mirrors Folding Featur e — If Equipped ........................... 8 9 ▫ Driver’s[...]

䡵 V oice Command — If Equipped ........... 1 1 9 ▫ V oice Command System Operation ........ 1 1 9 ▫ Commands ........................ 1 2 1 ▫ V oice T raining ...................... 1 2 4 䡵 Seats .............................. 1 2 4 ▫ Manual Seats — If Equipped ............ 1 2 5 ▫ Power Seats — If Equipped ............. 1 2 6 ?[...]

▫ Interior Lights ...................... 1 3 9 䡵 W indshield W ipers And W ashers .......... 1 4 0 ▫ Intermittent W iper System .............. 1 4 0 ▫ W indshield W ashers .................. 1 4 1 ▫ Mist Feature ........................ 1 4 1 ▫ Headlights On W ith W ipers (A vailable W ith Automatic Headlights Only) ............ 1 4 2 ?[...]

䡵 Power Sunroof — If Equipped ............ 1 5 5 ▫ Opening Sunroof — Expr ess ............ 1 5 6 ▫ Closing Sunroof — Expr ess ............. 1 5 6 ▫ Pinch Protect Featur e ................. 1 5 6 ▫ Pinch Protect Override ................ 1 5 7 ▫ V enting Sunroof — Express ............. 1 5 7 ▫ Sunshade Operation ...............[...]

MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical mirror adjustment. Adjust the mirror to center on the view through the r ear window . Headlight glare can be r educed by moving the small control under the mirr or to the night position (toward the rear of the vehicle). The mirr or should be adjusted while s[...]

Automatic Dimming Mirror — If Equipped This mirror automatically adjusts for headlight glar e from vehicles behind you. Y ou can turn the featur e on or off by pr essing the button at the base of the mirror . A light next to the button will illuminate to indicate when the dimming feature is activated. CAUTION! T o avoid damage to the mirror durin[...]

W ARNING! V ehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger side convex mirror could cause you to collide with another vehicle or other object. Use your inside mirror when judging the size or distance of a vehicle seen in the passenger sid[...]

Power Mirrors The power mirror switch is located on the driver’s door trim panel, next to the power door lock switch. A r otary knob selects the left mirror , right mirror or off position. After selecting a mirror , move the knob in the same direction you want the mirr or to move. Use the center off position to guard against accidentally moving a[...]

Uconnect™ Phone — IF EQUIPPED Uconnect™ Phone is a voice-activated, hands-free, in- vehicle communications system. Uconnect™ Phone al- lows you to dial a phone number with your cellular phone using simple voice commands (e.g., ⬙ Call” ѧ “Mike” ѧ ”W ork ⬙ or ⬙ Dial” ѧ “248-555-1212 ⬙ ). Y our cellular phone’s audio i[...]

Uconnect™ Phone allows you to transfer calls between the system and your cellular phone as you enter or exit your vehicle and enables you to mute the system’s microphone for private conversation. The Uconnect™ Phone is driven through your Bluetooth 威 “Hands-Free Pr ofile” cellular phone. Uconnect™ features Bluetooth 威 technology - t[...]

The Uconnect™ Phone can be used with any Hands-Free Profile certified Bluetooth 威 cellular phone. See the Uconnect™ website for supported phones. If your cellu- lar phone supports a differ ent profile (e.g., Headset Profile) you may not be able to use any Uconnect™ Phone features. Refer to your cellular service pr ovider or the phone manufa[...]

• For each feature explanation in this section, only the combined form of the voice command is given. Y ou can also break the commands into parts and say each part of the command when you are asked for it. For example, you can use the combined form voice com- mand ⬙ Phonebook New Entry , ⬙ or you can break the combined form command into two v[...]

The following are general phone to Uconnect™ Phone pairing instructions: • Press the button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Setup Phone Pairing. ⬙ • When prompted, after the beep, say ⬙ Pair a Phone ⬙ and follow the audible prompts. • Y ou will be asked to say a four-digit Personal Identi- [...]

• The system will prompt you to say the number you want to call. • For example, you can say ⬙ 234-567-8901 ⬙ . • The Uconnect™ Phone will confirm the phone number and then dial. The number will appear in the display of certain radios. Call by Saying a Name • Press the button to begin. • After the ⬙ Ready ⬙ prompt and the followi[...]

• When prompted, enter the number designation (e.g., ⬙ Home, ⬙⬙ W ork, ⬙⬙ Mobile, ⬙ or ⬙ Pager ⬙ ). This will allow you to store multiple numbers for each phonebook entry , if desired. • When prompted, r ecite the phone number for the phonebook entry that you are adding. After you are finished adding an entry into the phone- boo[...]

• Depending on the maximum number of entries down- loaded, there may be a short delay befor e the latest downloaded names can be used. Until then, if avail- able, the previous downloaded phonebook is available for use. • Only the phonebook of the currently connected cellu- lar phone is accessible. • Only the cellular phone’s phonebook is do[...]

first disconnect or drop the Bluetooth 威 connection to the Uconnect™ Phone, and then send the address book entry via Bluetooth 威 . Please see your phone Owner ’s Manual for specific instructions on how to drop the Bluetooth 威 connection. • If the phonebook entry is longer than 24 characters, it will only use the first 24 characters. Edi[...]

Delete Uconnect™ Phonebook Entry NOTE: Editing phonebook entries is recommended when the vehicle is not in motion. • Press the button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Phonebook Delete. ⬙ • After you enter the Phonebook Delete menu, you will then be asked for the name of the entry that you wish to [...]

• Note that only the phonebook in the current language is deleted. • Automatic downloaded phonebook entries cannot be deleted or edited. List All Names in the Uconnect™ Phonebook • Press the button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Phonebook List Names. ⬙ • The Uconnect™ Phone will play the n[...]

call, press and hold the button until you hear a single beep, indicating that the incoming call was rejected. Answer or Reject an Incoming Call - Call Currently in Progress If a call is currently in pr ogress and you have another incoming call, you will hear the same network tones for call waiting that you normally hear when using your cellular pho[...]

Conference Call When two calls are in pr ogress (one active and one on hold), press and hold the button until you hear a double beep indicating that the two calls have been joined into one conference call. Three-W ay Calling T o initiate three-way calling, press the button while a call is in progr ess, and make a second phone call, as described und[...]

• After the ignition key is switched to OFF , a call can continue on the Uconnect™ Phone either until the call ends, or until the vehicle battery condition dictates cessation of the call on the Uconnect™ Phone and transfer of the call to the cellular phone. • After the ignition key is switched to OFF , a call can continue on the Uconnect™[...]

If the phone is not reachable and the Uconnect™ Phone is operational, you may reach the emer gency number as follows: • Press the button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Emergency ⬙ and the Uconnect™ Phone will instr uct the paired cellular phone to call the emer gency num- ber . This feature is s[...]

• After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ T owing Assistance. ⬙ NOTE: • The towing assistance number dialed is based on the country where the vehicle is pur chased (1-800-528- 2069 for the U.S., 1-877-213-4525 for Canada, 55-14- 3454 for Mexico City and 1-800-712-3040 for outside Mexico City in Mexico). Please refer to [...]

on your cellular phone keypad, you can press the button and say the sequence you wish to enter , followed by the word ⬙ Send. ⬙ For example, if r equired to enter your PIN followed with a pound, ( 3746# ) ,y o uc a n press the button and say , ⬙ 3746# Send. ⬙ Saying a number , or sequence of numbers, followed by ⬙ Send, ⬙ is also to be [...]

• Press the button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Setup Confirmations. ⬙ The Uconnect™ Phone will play the current confirmation pr ompt status and you will be given the choice to change it. Phone and Network Status Indicators If available on the radio and/or on a premium display such as the instru[...]

• Following the beep, say ⬙ Mute. ⬙ In order to un-mute the Uconnect™ Phone: • Press the button. • Following the beep, say ⬙ Mute off. ⬙ Advanced Phone Connectivity T ransfer Call to and from Cellular Phone The Uconnect™ Phone allows ongoing calls to be trans- ferred fr om your cellular phone to the Uconnect™ Phone without termi[...]

the lowest priority . T o “select” or “delete” a paired phone being announced, press the button and say “Select” or “Delete.” Also, see the next two sec- tions for an alternate way to “select” or “delete” a paired phone. Select Another Cellular Phone This feature allows you to select and start using another phone paired with[...]

Things Y ou Should Know About Y our Uconnect™ Phone Uconnect™ Phone T utorial T o hear a brief tutorial of the system features, press the button and say “Uconnect™ T utorial.” V oice T raining For users experiencing difficulty with the system r ecog- nizing their voice commands or numbers, the Uconnect™ Phone V oice T raining feature ma[...]

• Speak normally , without pausing, just as you would speak to a person sitting a few feet/meters away from you. • Make sure that no one other than you is speaking during a V oice Command period. • Performance is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed, • low road noise, • smooth road surface, ?[...]

• In a convertible vehicle, system performance may be compromised with the convertible top down. Phone Far End Audio Performance • Audio quality is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed, • low road noise, • smooth road surface, • fully closed windows, • dry weather conditions, and • operati[...]

1 14 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 1 15[...]

1 16 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

V oice Commands Primary Alternate(s) zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all V oice Commands Primary Alternate(s) call cancel confirmation prompts continue delete dial download edit emergency English erase all Espanol Francais help home 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 1 17[...]

V oice Commands Primary Alternate(s) language list names list phones mobile mute mute off new entry no pager pair a phone phone pairing pairing phonebook phone book previous recor d again redial V oice Commands Primary Alternate(s) return to main menu return or main menu select phone select send set up phone settings or phone set up towing assistan[...]

General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • Changes or modifications not expressly appr oved by the party responsible for compliance could void the user’s authority to operate the equipment. • This device may not cause harmful interf[...]

NOTE: If you do not say a command within a few seconds, the system will present you with a list of options. If you ever wish to interrupt the system while it lists options, press the V oice Command button, listen for the beep, and say your command. Pressing the V oice Command button while the system is speaking is known as “barging in.” The sys[...]

Commands The V oice Command system understands two types of commands. Universal commands are available at all times. Local commands are available if the supported radio mode is active. Changing the V olume 1. Start a dialogue by pressing the V oice Command button. 2. Say a command (e.g., “Help”). 3. Use the ON/OFF VOLUME rotary knob to adjust t[...]

Radio FM T o switch to the FM band, say “FM” or “Radio FM”. In this mode, you may say the following commands: • “Frequency” (to change the fr equency) • “Next Station” (to select the next station) • “Previous Station” (to select the pr evious station) • “Radio Menu” (to switch to the radio menu) • “Main Menu” ([...]

Memo T o switch to the voice recorder mode, say “Memo”. In this mode, you may say the following commands: • “New Memo” (to recor d a new memo) — During the recor ding, you may press the V oice Command button to stop recor ding. Y ou proceed by saying one of the following commands: − “Save” (to save the memo) − “Continue” (to[...]

NOTE: Keep in mind that you have to press the V oice Command button first and wait for the beep before speaking the “Bar ge In” commands. V oice T raining For users experiencing difficulty with the system r ecog- nizing their voice commands or numbers the Uconnect™ V oice “V oice T raining” feature may be used. 1. Press the V oice Command[...]

Manual Seats — If Equipped The adjusting bar is at the front of the seat, near the floor . Pull the bar upward to move the seat forwar d or rearwar d. Release the bar once the seat is in the position desired. Using body pressur e, move forward and r earward on the seat to be sure that the seat adjusters have latched. W ARNING! Adjusting a seat wh[...]

Power Seats — If Equipped The power seat switch is located on the outboard side of the seat near the floor . Use this switch to move the driver’s seat up or down, forward or r earward or to recline the seatback. The passenger’s seat will move up or down, forward or r earward. W ARNING! Adjusting a seat while the vehicle is moving is dangerous[...]

Power Reclining Seats — If Equipped The recliner contr ol is located on the outboard side of the seat. Use the recline contr ol to adjust the forward or r earward position of the seatback. W ARNING! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the se[...]

Lumbar Support — If Equipped This feature allows you to incr ease or decrease the amount of lumbar support. T urn the control lever for- ward to incr ease and rearwar d to decrease the desir ed amount of lumbar support. Head Restraints Head restraints can r educe the risk of injury in the event of a rear impact. The head r estraint should be adju[...]

T o remove the head restraint, pull upwar d on the head restraint to its highest position, push in both buttons at the base of each head restraint r od, and simultaneously pull up on the head restraint. T o install the head restraint, insert the head restraint r ods into each guide, apply pressur e down on the headrest until the head restraint r ea[...]

NOTE: Ensure that the fr ont of the head restraint is facing toward the fr ont of the vehicle. W ARNING! Driving a vehicle with the head restraints removed or improperly adjusted could cause serious injury or death in the event of a collision. The head restraints should always be checked prior to operating the vehicle and never adjusted while the v[...]

W ARNING! • Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury , medication, alcohol use, ex- haustion or other physical condition must exercise care when using the seat heater . It may cause burns even at low temperatures, especially if used for long periods of time. • Do not [...]

When the seatback is folded to the upright position, make sure it is latched by str ongly pulling on the top of the seatback above the seat strap. W ARNING! • Be certain that the seatback is securely locked into position. If the seatback is not securely locked into position, the seat will not provide the proper stability for child seats and/or pa[...]

2. Move to the outside of the vehicle and push the safety catch to the left. The safety catch is located under the center front edge of the hood. Use the hood prop r od (if equipped) to secure the hood in the open position. CAUTION! T o prevent possible damage, do not slam the hood to close it. Lower the hood, until it is open approxi- mately 6 in [...]

LIGHTS Headlight Switch The headlight switch is located on the left side of the instrument panel. This switch contr ols the operation of the headlights, parking lights, instru- ment panel lights, instrument panel light dimming, inte- rior lights and fog lights. Rotate the headlight switch clockwise to the first detent for parking light and instrume[...]

Headlights On with Wipers (A vailable with Automatic Headlights Only) When this feature is active, the headlights will turn on approximately 10 seconds after the wipers ar e turned on if the headlight switch is placed in the AUTO position. In addition, the headlights will turn off when the wipers ar e turned off if they wer e turned on by this feat[...]

Daytime Running Lights — If Equipped The high beam headlights will come on as Daytime Running Lights whenever the ignition switch is ON, the headlights are of f and the parking brake is off. The headlight switch must be used for normal nighttime driving. Lights-On Reminder If the headlights or parking lights are on after the ignition is turned OF[...]

T urn Signals Move the multifunction lever up or down and the arrows on each side of the instrument cluster flash to show proper operation of the fr ont and rear turn signal lights. NOTE: • If either light remains on and does not flash, or ther e is a very fast flash rate, check for a defective outside light bulb. If an indicator fails to light w[...]

Flash-to-Pass Y ou can signal another vehicle with your headlights by lightly pulling the multifunction lever toward you. This will turn on the high beams headlights until the lever is released. Overhead Console Map/Reading Lights These lights are mounted between the sun visors on the overhead console. Each light is turned on by pr essing the lens.[...]

Interior Lights The interior lights come on when a door is opened. T o protect the battery , the interior lights will turn off automatically 10 minutes after the ignition switch is moved to the LOCK position. This will occur if the interior lights were switched on manually or ar e on because a door is open. This includes the glove box light, but no[...]

WINDSHIELD WIPERS AND W ASHERS The multifunction lever operates the windshield wipers and washer when the ignition switch is in the ON position. The lever is located on the left side of the steering column. Rotate the end of the multifunction lever to the first detent past the intermittent settings for low-speed wiper operation, or to the second de[...]

wipe interval from a minimum of one cycle every second to a maximum of approximately 23 seconds between cycles. Windshield W ashers T o use the washer , push the multifunction lever inward (toward the steering column) to the second detent and hold it for as long as washer spray is desired. If you activate the washer while the windshield wiper contr[...]

Headlights On with Wipers (A vailable with Automatic Headlights Only) When this feature is active, the headlights will turn on approximately 10 seconds after the wipers ar e turned on if the headlight switch is placed in the AUTO position. In addition, the headlights will turn off when the wipers ar e turned off if they wer e turned on by this feat[...]

outward or push it inwar d as desired. T o lock the steering column in position, push the control handle inwar d until fully engaged. W ARNING! Do not adjust the steering column while driving. Adjusting the steering column while driving or driv- ing with the steering column unlocked, could cause the driver to lose control of the vehicle. Be sure th[...]

• The pedals can be adjusted with the ignition OFF . • The pedals can be adjusted while driving. • The pedals cannot be adjusted when the transmission is in REVERSE or when the Electronic Speed Contr ol is on. CAUTION! Do not place any article under the adjustable pedals or impede its ability to move as it may cause damage to the pedal contro[...]

NOTE: In order to ensur e proper operation, the Elec- tronic Speed Contr ol System has been designed to shut down if multiple Speed Control functions ar e operated at the same time. If this occurs, the Electronic Speed Contr ol System can be reactivated by pushing the Electr onic Speed Control ON/OFF button and r esetting the desired vehicle set sp[...]

T o Set At A Desired Speed T urn the Electronic Speed Control ON. When the vehicle reaches the speed desir ed, push the lever downward to SET DECEL and release. Remove your foot from the accelerator pedal and the vehicle will operate at the selected speed. NOTE: • Electronic Speed Contr ol will only function in 3rd, 4th, or 5th gear when in the A[...]

RESUME ACCEL position, the set speed will continue to increase until the lever is r eleased, then the new set speed will be established. T apping the Electronic Speed Control lever to RESUME ACCEL once will result in a 1 mph (1.6 km/h) speed increase. Each time the lever is tapped speed incr eases, so tapping the lever three times will incr ease sp[...]

W ARNING! Electronic Speed Control can be dangerous where the system cannot maintain a constant speed. Y our ve- hicle could go too fast for the conditions and you could lose control. An accident could be the result. Do not use Electronic Speed Control in heavy traffic or on roads that are winding, icy , snow-covered or slippery . OVERHEAD CONSOLE [...]

These lights also turn on when a door is opened, when the UNLOCK button on the Remote Keyless Entry (RKE) transmitter is pressed, or when the dimmer contr ol is turned fully upward, past the second detent. Sunglasses Storage At the rear of the console, a compartment is pr ovided for the storage of a pair of sunglasses. The storage compartment acces[...]

W ARNING! • Y our motorized door or gate will open and close while you are training the Universal T ransceiver . Do not train the transceiver if people, pets, or other objects are in the path of the door or gate. Only use this transceiver with a garage door opener that has a “stop and reverse” feature as required by federal safety standards. [...]

2. Place the handheld transmitter 1 to 3 in (3 to 8 cm) from the HomeLink 威 buttons while keeping the EVIC display in view . For optimal training, point the battery end of the hand- held transmitter away from the HomeLink 威 . 3. Simultaneously , press and hold both the chosen HomeLink 威 button and the handheld transmitter button until the EVI[...]

This can usually be found where the hanging antenna wire is attached to the garage door opener motor (it is NOT the button normally used to open and close the door). 6. Firmly press and release the LEARN or TRAINING button. The name and color of the button may vary by manufacturer . NOTE: Y ou have 30 seconds in which to initiate the next step afte[...]

Gate Operator/Canadian Programming Canadian radio-frequency laws r equire transmitter sig- nals to “time-out” (or quit) after several seconds of transmission – which may not be long enough for HomeLink 威 to pick up the signal during programming. Similar to this Canadian law , some U.S. gate operators are designed to “time-out” in the sa[...]

Reprogramming A Single HomeLink 姞 Button T o reprogram a channel that has been pr eviously trained, follow these steps: 1. Place the ignition in the RUN position. 2. Press and hold the desired HomeLink 威 button for 20 seconds until the EVIC display states “CHANNEL # TRAINING.” Do not release the button. 3. W ithout releasing the button, pro[...]

General Information This device complies with FCC rules Part 15 and Industry Canada RSS-210. Operation is subject to the following two conditions: 1. This device may not cause harmful interference 2. This device must accept any interference that may be received including interfer ence that may cause undesired operation NOTE: The transmitter has bee[...]

W ARNING! • Never leave children in a vehicle with the key in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death. • In an accident, there is a greater risk of being thrown from a vehicle with[...]

Pinch Protect Override If a known obstruction (ice, debris, etc.) pr events closing, press the switch forwar d and hold for two seconds after the reversal occurs. This allows the sunr oof to move toward the closed position. NOTE: Pinch protection is disabled while the switch is pressed. V enting Sunroof — Express Press and r elease the ⬙ V ent [...]

Ignition Off Operation For vehicles not equipped with the Electronic V ehicle Information Center (EVIC), the power sunroof switch will remain active for 10 minutes after the ignition switch is turned OFF . Opening either front door will cancel this feature. For vehicles equipped with the EVIC, the power sunroof switch will remain active for up to 6[...]

W ARNING! Do not place ashes inside the cubby bin located on the center console on vehicle’s not equipped with the ash receiver tray . A fire leading to bodily injury could result. The center console outlet is powered dir ectly from the battery (power available at all times). Items plugged into this outlet may discharge the battery and/or pr even[...]

W ARNING! T o avoid serious injury or death: • Only devices designed for use in this type of outlet should be inserted into any 12 V olt outlet. • Do not touch with wet hands. • Close the lid when not in use and while driving the vehicle. • If this outlet is mishandled, it may cause an electric shock and failure. CAUTION! • Many accessori[...]

CAUTION! (Continued) • Power outlets are designed for accessory plugs only . Do not hang any type of accessory or acces- sory bracket from the plug. Improper use of the power outlet can cause damage. CUPHOLDERS Front Seat Cupholders The cupholders are located in the forwar d edge of the center console. Front Seat Cupholders 3 UNDERST ANDING THE F[...]

Rear Seat Cupholders The rear seat cupholders ar e located in the center armrest between the rear seats. The cupholders ar e positioned forward in the armr est and side-by-side to provide convenient access to beverage cans or bottles while maintaining a resting place for the r ear occupants elbows. STORAGE Console Features The center console contai[...]

The top compartment holds small items, such as a pen and note pad, while the larger bottom compartment will hold CDs and alike. The bottom compartment also con- tains a 12 V olt power outlet and a molded-in coin holder (designed to hold various size coins). A slot in the left and right side of the top compartment provides clearance for power cords [...]

When the seatback is folded to the upright position, make sure it is latched by str ongly pulling on the top of the seatback above the seat strap. W ARNING! • Be certain that the seatback is securely locked into position. If the seatback is not securely locked into position, the seat will not provide the proper stability for child seats and/or pa[...]

W ARNING! (Continued) • Place as much cargo as possible in front of the rear axle. T oo much weight or improperly placed weight over or behind the rear axle can cause the rear of the vehicle to sway . • Do not pile luggage or cargo higher than the top of the seatback. This could impair visibility or be- come a dangerous projectile in a sudden s[...]

LOAD LEVELING SYSTEM — IF EQUIPPED The automatic load leveling system will provide a level- riding vehicle under most passenger and cargo loading conditions. A hydraulic pump contained within the shock absorbers raises the rear of the vehicle to the corr ect height. It takes approximately 1 mile (1.6 km) of driving for the leveling to complete de[...]

UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS 䡵 Instrument Panel Featur es ............... 1 7 0 䡵 Instrument Cluster – Base ............... 1 7 1 䡵 Instrument Cluster – Pr emium ............ 1 7 2 䡵 Instrument Cluster Descriptions ........... 1 7 3 䡵 Electronic V ehicle Information Center (EVIC) – If Equipped .....................[...]

▫ Operating Instructions — V oice Command System (VR) — If Equipped ............. 2 0 2 ▫ Operating Instructions — Uconnect™ Phone — If Equipped ...................... 2 0 2 ▫ Clock Setting Procedur e — RBZ Radio ..... 2 0 2 ▫ Clock Setting Procedur e — RER/REN Radio ..................... 2 0 3 䡵 Media Center 130 (RES) — A[...]

▫ Controlling The iPod 威 Using Radio Buttons . . 232 ▫ Play Mode ......................... 2 3 2 ▫ List Or Browse Mode ................. 2 3 4 䡵 Uconnect™ Multimedia (Satellite Radio) — If Equipped (REN/RER/RES Radios Only) .... 2 3 6 ▫ System Activation .................... 2 3 6 ▫ Electronic Serial Number/Sirius Identification N[...]

INSTRUMENT P ANEL FEA TURES 1 — Air Outlet 7 — Climate Control 13 — Hood Release 2 — Instrument Cluster 8 — Heated Seat Switch* 14 — T runk Release Button 3 — Hazard Switch 9 — Power Outlet 15 — Headlight Switch 4 — Electronic Stability Pr ogram OFF Button* / T raction Control System OFF Button* 10 — Ash T ray* * If Equipped 5[...]

INSTRUMENT CLUSTER – BASE 4 UNDERST ANDING YOUR INSTRUMENT P ANEL 171[...]

INSTRUMENT CLUSTER – PREMIUM 172 UNDERST ANDING YOUR INSTRUMENT P ANEL[...]

INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel Gauge The pointer shows the level of fuel in the fuel tank when the ignition switch is in the ON position. 2. T rip Odometer Button Premium Cluster Press this button to change the display fr om odometer to either of two trip odometer settings. The letter “A” or “B” will appear when in the trip odomete[...]

6. Charging System W arning Light This light shows the status of the electrical charg- ing system. The light should turn on when the ignition switch is first turned ON and remain on briefly as a bulb check. If the light stays on or turns on while driving, turn off some of the vehicle’s non-essential electrical devices (i.e., radio) or slightly in[...]

The gauge pointer will likely indicate a higher tempera- ture when driving in hot weather , up mountain grades, or when towing a trailer . It should not be allowed to exceed the upper limits of the normal operating range. CAUTION! Driving with a hot engine cooling system could damage your vehicle. If the temperature gauge reads “H,” pull over a[...]

10. Airbag W arning Light This light will turn on for six to eight seconds as a bulb check when the ignition switch is first turned ON. If the light is either not on during starting, turns on while driving, or stays on, have the system inspected at an authorized dealer as soon as possible. Refer to “Occupant Restraints” in “Things T o Know Be[...]

W ARNING! If a warning light remains on the system may not be working and you will not have the benefit of ESP or BAS. Under certain driving conditions, where ESP or BAS would be beneficial, you - if you have not adjusted your driving speeds and stopping in or to account for the lack of the feature, may be in acci- dent. 14. Oil Pressure W arning L[...]

17. Shift Lever Indicator — Automatic T ransmission Only The Shift Lever Indicator is self-contained within the instrument cluster . It displays the gear position of the automatic transmission. 18. Front Fog Light Indicator — If Equipped This indicator will illuminate when the front fog lights are on. 19. Odometer / Electronic V ehicle Informat[...]

On vehicles equipped with a Premium Instr ument Clus- ter , this display shows the Electronic V ehicle Information Center (EVIC) messages when the appropriate conditions exist. Refer to Electronic V ehicle Information Center (EVIC) for further information. ECO (Fuel Saver Indicator) — If Equipped The ECO indicator will illuminate when you are dri[...]

A loose, impr operly installed, or damaged fuel filler cap may also turn on the Malfunction Indicator Light (MIL). Lo tirE When the appropriate condition exists, the odometer display will toggle between Lo and tirE for three cycles. noFUSE If the vehicle diagnostic system determines that the Ignition Off Draw (IOD) fuse is impr operly installed, or[...]

NOTE: If the indicator message illuminates when you start the engine, the oil change indicator system did not reset. If necessary , repeat these steps. 20. Brake W arning Light This light monitors various brake functions, including brake fluid level and parking brake application. If the brake light turns on, it may indicate that the parking brake i[...]

V ehicles equipped with the Anti-Lock Brake System (ABS), are also equipped with Electr onic Brake Force Distribution (EBD). In the event of an EBD failure, the Brake W arning Light will turn on along with the ABS Light. Immediate repair to the ABS system is requir ed. Operation of the Brake W arning Light can be checked by turning the ignition swi[...]

As an added safety feature, your vehicle has been equipped with a T ire Pressur e Monitoring System (TPMS) that illuminates a low tire pr essure telltale when one or more of your tir es is significantly under-inflated. Accordingly , when the low tire pr essure telltale illumi- nates, you should stop and check your tires as soon as possible, and inf[...]

CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system opera- tion or sensor damage may result when using re- placement equipment that is not of the same size, type, and/or style. Aftermarket wheels can cause se[...]

25. Malfunction Indicator Light (MIL) The Malfunction Indicator Light (MIL) is part of an onboard diagnostic system called OBD. The OBD system monitors engine and automatic transmission control systems. The MIL will turn on when the key is in the ON position before engine start. If the MIL does not come on when turning the key from LOCK to ON, have[...]

26. Door Ajar Indicator This light will turn on to indicate that one or more door may be ajar . 27. Decklid Ajar Indicator This light will turn on to indicate that the decklid may be ajar . 28. Windshield W asher Fluid Low Indicator This light will turn on to indicate the windshield washer fluid is low . ELECTRONIC VEHICLE INFORMA TION CENTER (EVIC[...]

• Personal Settings (Customer-Pr ogrammable Features) • Compass display • Outside temperature display • T rip computer functions • Uconnect™ hands-free communication system dis- plays (if equipped) • Navigation system screens (if equipped) • Audio mode display • Surround Sound modes (if equipped with Driver - Selectable Surround [[...]

Press the AUDIO MODE button to select the Compass/T emp/Audio screen. Along with compass reading and outside temperatur e, this screen will display radio and media mode information depending on which radio is in the vehicle. Refer to “Remote Sound System Controls”. Electronic V ehicle Information Center (EVIC) Displays When the appropriate cond[...]

• ECO (Fuel Saver Indicator) — if equipped • SER VICE A WD SYSTEM — All Wheel Drive (A WD) system is not functioning properly and service is requir ed. • Channel # T ransmit • Channel # T raining • Channel # T rained • Clearing Channels • Channels Cleared • Did Not T rain • Insert Key/T urn T o Run (refer to “Remote Starting[...]

2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. T urn the ignition switch to the LOCK position. NOTE: If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary , repeat this pr ocedure. T rip Functions Press and r elease the MENU button until one of t[...]

This feature allows you to monitor when you ar e driving in a fuel efficient manner , and it can be used to modify driving habits in order to incr ease fuel economy . • Distance T o Empty (DTE) Shows the estimated distance that can be traveled with the fuel remaining in the tank. This estimated distance is determined by a weighted average of the [...]

and average fuel economy , according to the current fuel tank level. DTE cannot be reset thr ough the FUNCTION SELECT button. NOTE: Significant changes in driving style or vehicle loading will greatly af fect the actual drivable distance of the vehicle, regar dless of the DTE displayed value. When the DTE value is less than 30 miles (48 km) estimat[...]

T o Reset The Display Reset will only occur while a resettable function is being displayed. Press and r elease the FUNCTION SELECT button once to clear the resettable function being dis- played. T o reset all resettable functions, pr ess and release the FUNCTION SELECT button a second time within three seconds of r esetting the currently-displayed [...]

When the vehicle automatically transitions from A WD to R WD the EVIC will display the following message for five seconds. Refer to “All Wheel Drive — If Equipped” in “Starting And Operating” for more information on the All Wheel Drive (A WD) system. Driver-Selectable Surround Sound (DSS) – If Equipped Press and r elease the MENU button[...]

Compass Display The compass readings indicate the dir ection the vehicle is facing. Press and r elease the HOME button to display one of eight compass readings and the outside temperatur e. NOTE: The system will display the last known outside temperature when starting the vehicle and may need to be driven several minutes before the updated tempera-[...]

5. Complete one or more 360 degree turns (in an ar ea free from lar ge metal or metallic objects) until the “CAL” message turns off. The compass will now function normally . Compass V ariance Compass V ariance is the difference between Magnetic North and Geographic North. T o compensate for the differ ences, the variance should be set for the z[...]

3. Press the SCROLL button until “Compass V ariance” message and the last variance zone number displays in the EVIC. 4. Press and release FUNCTION SELECT button until the proper variance zone is selected accor ding to the map. 5. Press and release the HOME button to exit. Navigation — If Equipped Navigation Display Control Press and r elease [...]

Press and r elease the MENU button until Personal Set- tings displays in the EVIC. Use the SCROLL button to display one of the following choices. “Language” When in this display you may select one of five lan- guages for all display nomenclature, including the trip functions and the navigation system (if equipped). Press the FUNCTION SELECT but[...]

press and r elease the FUNCTION SELECT button until “Driver Door 1st Press” or “All Doors 1st Pr ess” appears. “Sound Horn with Remote Key Lock” When ON is selected, a short horn sound will occur when the RKE transmitter LOCK button is pressed. This featur e may be selected with or without the Flash Lights with Remote Key Lock feature. [...]

when exiting the vehicle. T o make your selection, press and release the FUNCTION SELECT button until “0,” “30,” “60,” or “90” appears. “T urn Headlights On with Remote Key Unlock” When this feature is selected, the headlights will activate and remain on for up to 90 seconds when the doors ar e unlocked with the RKE transmitter [...]

“Confirmation of V oice Commands” — If Equipped When ON is selected, all voice commands from the Uconnect™ system are confirmed. T o make your selec- tion, press and r elease the FUNCTION SELECT button until “ON” or “OFF” appears. “T urn-by-T urn Navigation” — If Equipped When ON is selected, the turn-by-turn directions will a[...]

Refer to your Uconnect™ Multimedia REN, RER or RBZ user’s manual for detailed operating instructions. Operating Instructions — V oice Command System (VR) — If Equipped Refer to “V oice Command” in the Uconnect™ User Manual located on the DVD for further details. Operating Instructions — Uconnect™ Phone — If Equipped Refer to “[...]

2. T ouch the screen where the time is displayed. The clock setting menu will appear on the screen. 3. When this feature is on, a check mark will appear in the box next to the words “Daylight Savings.” T ouch the screen wher e the words “Daylight Savings” ar e dis- played to change the current setting. Show T ime if Radio is Off When select[...]

satellite clock is Greenwich Mean T ime (GMT). This is the worldwide standard for time. This makes the system’s clock very accurate once the appropriate time zone and daylight savings information is set. T o Manually Set the Clock — RER/REN 1. T urn on the radio. 2. T ouch the screen wher e the time is displayed. 3. T ouch the screen wher e “[...]

Show T ime if Radio is Off When selected, this feature will display the time of day on the touch screen when the radio is turned of f. Proceed as follows to change the current setting: 1. T urn on the radio. 2. T ouch the screen wher e the time is displayed. 3. T ouch the screen wher e “User Clock” is displayed, the clock setting menu will appe[...]

MEDIA CENTER 130 (RES) — AM/FM STEREO RADIO WITH CD PLA YER (MP3 AUX JACK) NOTE: The radio sales code is located on the lower right side of the radio faceplate. Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Push the ON/VOLUME control kn[...]

SEEK Buttons Press and r elease the SEEK buttons to search for the next listenable station in AM/FM mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping, until you release it. TIME Button [...]

Push the rotary TUNE/SCROLL contr ol knob a second time and MID will display . T urn the TUNE/SCROLL control knob to the right or left to incr ease or decrease the mid-range tones. Push the rotary TUNE/SCROLL control knob a thir d time and TREBLE will display . T urn the TUNE/SCROLL control knob to the right or left to incr ease or decrease the tre[...]

SET 2 in both AM and FM. This allows a total of 12 AM and 12 FM stations to be stored into pushbutton memory . The stations stored in SET 2 memory can be selected by pressing the pushbutton twice. Every time a preset button is used, a corr esponding button number will display . Button s1-6 These buttons tune the radio to the stations that you commi[...]

If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will show the track number , and index time in minutes and seconds. Play will begin at the start of track 1. CAUTION! • This CD player will accept 4-3/4 in (12 cm) discs only . The use of o[...]

TIME Button Press this button to change the display fr om a large CD playing time display to a small CD playing time display . R W/FF Press and hold the FF (Fast Forwar d) button and the CD player will begin to fast forward until FF is r eleased, or R W or another CD button is pressed. The R W (Reverse) button works in a similar manner . AM/FM Butt[...]

The radio uses the following limits for file systems: • Maximum number of folder levels: 8 • Maximum number of files: 255 • Maximum number of folders. (The radio display of file names and folder names is limited. For large numbers of files and/or folders, the radio may be unable to display the file name and folder name, and will assign a numb[...]

rates (VBR) are also supported. The majority of MP3 files use a 44.1 kHz sampling rate and a 192, 160, 128, 96 or VBR bit rate. MPEG Specification Sampling Frequency (kHz) Bit Rate (kbps) MPEG-1 Audio Layer 3 48, 44.1, 32 320, 256, 224, 192, 160, 128, 1 12, 96, 80, 64, 56, 48, 40, 32 MPEG-2 Audio Layer 3 24, 22.05, 16 160, 128, 144, 1 12, 96, 80, 6[...]

Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack, which allows the user to plug in a portable device, such as an MP3 player , or cassette player , and utilize the vehicle’s audio system to amplify the source and play thr ough the vehicle speakers. Pressing the DISC/AUX button will change the mode to auxiliar[...]

Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio. Electronic V olume Control The electronic volume contr ol turns conti[...]

Phone Button Uconnect™ Phone — If Equipped Press this button to operate the Uconnect™ Phone featur e (if equipped). Refer to “Uconnect™ Phone” in “Under- standing The Features If Y our V ehicle”. If your vehicle is not equipped with or this feature is not available on your vehicle, a “Not Equipped W ith Uconnect” message will di[...]

INFO Button Press the INFO button for an RDS station (one with call letters displayed). The radio will return a Radio T ext message broadcast fr om an FM station (FM mode only). R W/FF Pressing the R W (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next fr equency in the direction of the arr ows. This feature operates in e[...]

Push the rotary TUNE/SCROLL control knob again to exit setting tone, balance, and fade. MUSIC TYPE Button Pressing this button once will turn on the Music T ype mode for five seconds. Pressing the MUSIC TYPE button or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be se- lected. Many radio stations do[...]

Program T ype 16-Digit Character Display Soft Soft Soft Rock Soft Rck Soft Rhythm and Blues Soft R&B Sports Sports T alk T alk T op 40 T op 40 W eather W eather By pressing the SEEK button when the Music T ype icon is displayed, the radio will be tuned to the next frequency station with the same selected Music T ype name. The Music T ype functi[...]

window . Select the button (1–6) you wish to lock onto this station and press and r elease that button. If a button is not selected within five seconds after pressing the SET/ RND button, the station will continue to play but will not be stored into pushbutton memory . Y ou may add a second station to each pushbutton by repeating the above pr oce[...]

Inserting Compact Disc(s) Gently insert one CD into the CD player with the CD label facing up. The CD will automatically be pulled into the CD player and the CD icon will illuminate on the radio display . If a CD does not go into the slot more than 1.0 in (2.5 cm), a disc may already be loaded and must be ejected before a new disc can be loaded. If[...]

NOTE: Ejecting with the ignition OFF is not allowed on convertible or soft-top models (if equipped). SEEK Button Press the right SEEK button for the next selection on the CD. Press the left SEEK button to r eturn to the beginning of the current selection, or r eturn to the beginning of the previous selection if the CD is within the first second of [...]

Supported Media (Disc T ypes) The MP3 file recor ding media supported by the radio are CDDA, CD-R, CD-R W , MP3, and CDDA+MP3. Supported Medium Formats (File Systems) The medium formats supported by the radio are ISO 9660 Level 1 and Level 2 and includes the Joliet extension. When reading discs r ecorded using formats other than ISO 9660 Level 1 an[...]

Supported MP3 File Formats The radio will recognize only files with the *.MP3 exten- sion as MP3 files. Non-MP3 files named with the *.MP3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file. When using the MP3 encoder to compress audio data to an MP3 file, the bit rate and[...]

Loading times for playback of MP3 files may be affected by the following: • Media - CD-R W media may take longer to load than CD-R media • Medium formats - Multisession discs may take longer to load than non-multisession discs • Number of files and folders - Loading times will increase with mor e files and folders T o increase the speed of di[...]

Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack which allows the user to plug in a portable device such as an MP3 player or cassette player and utilize the vehicle’s audio system to amplify the source and play thr ough the vehicle speakers. Pressing the AUX button will change the mode to auxil- iary device [...]

information, call the toll-free number 888-539-7474, or visit the Sirius web site at www .sirius.com, or at www- .siriuscanada.ca for Canadian residents. Electronic Serial Number/Sirius Identification Number (ESN/SID) Please have the following information available when calling: 1. The Electronic Serial Number/Sirius Identification Number (ESN/SID)[...]

Reception Quality Satellite reception may be interr upted due to one of the following reasons: • The vehicle is parked in an undergr ound parking structur e or under a physical obstacle. • Dense tree coverage may interr upt reception in the form of short audio mutes. • Driving under wide bridges or along tall buildings can cause intermittent [...]

additional three seconds will make the radio display the Song T itle all of the time (press and hold again to return to normal display). R W/FF Pressing the R W (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next channel in the direction of the arr ows. TUNE Control (Rotary) T urn the rotary TUNE/SCROLL control knob clockw[...]

SET Button – T o Set the Pushbutton Memory When you are r eceiving a channel that you wish to commit to pushbutton memory , press the SET button. The symbol SET 1 will now show in the display window . Select the button (1-6) you wish to lock onto this channel and press and r elease that button. If a button is not selected within five seconds afte[...]

This feature allows an iPod 威 to be plugged into the vehicle’s sound system through a 16–pin connector , using the provided interface cable. UCI supports Mini, 4G, Photo, Nano, 5G iPod 威 and iPhone 威 devices. Some iPod 威 software versions may not fully support the UCI features. Please visit Apple’s website for software updates. NOTE: [...]

Using This Feature By using the provided connection cable to connect an iPod 威 to the vehicle’s UCI 16–pin connector port: • The iPod 威 audio can be played on the vehicle’s sound system, providing metadata (artist, track title, album, etc.) information on the radio display . • The iPod 威 can be controlled using the radio buttons to [...]

• Jump backward in the curr ent track by pressing and holding the << RW button. Holding the << RW button long enough will jump to the beginning of the current track. • Jump forward in the curr ent track by pressing and holding the FF >> button. • A single press backwar d << RW or forward FF >> will jump backward [...]

• RND button (available on sales code RES radio only): Pressing this button toggles between Shuf fle ON and Shuffle OFF modes for the iPod 威 .I ft h e RND icon is showing on the radio display , then the shuffle mode is ON. List Or Browse Mode During Play mode, pressing any of the buttons described below , will bring up List mode. List mode enab[...]

• Pressing a PRESET button will display the curr ent list on the top line and the first item in that list on the second line. • T o Exit List mode without selecting a track, press the same PRESET button again to go back to Play mode . • LIST button: The LIST button will display the top level menu of the iPod 威 . T urn the TUNE control knob [...]

Uconnect™ Multimedia (SA TELLITE RADIO) — IF EQUIPPED (REN/RER/RES RADIOS ONL Y) Satellite radio uses direct satellite-to-r eceiver broadcast- ing technology to provide clear digital sound, coast to coast. The subscription service provider is Sirius Satellite Radio. This service offers over 130 channels of music, sports, news, entertainment, an[...]

Sirius ID number will display . The Sirius ID number display will time out in two minutes. Press any button on the radio to exit this screen. ESN/SID Access W ith REN/RER Radios While in SA T mode, press the MENU button on the radio faceplate. Next, touch the SUBSCRIPTION tab on the touch screen. All the ESNs that apply to your vehicle will display[...]

Operating Instructions - Uconnect™ Multimedia (Satellite) Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. SEEK Buttons Press and r elease the SEEK buttons to search for the next channel in Satellite mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the n[...]

MUSIC TYPE Button Pressing this button once will turn on the Music T ype mode for five seconds. Pressing the MUSIC TYPE button or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be se- lected. T oggle the MUSIC TYPE button again to select the music type. By pressing the SEEK button when the Music T ype[...]

pushbutton memory . The channels stored in SET 2 memory can be selected by pressing the pushbutton twice. Every time a preset button is used, a corr esponding button number will display . Button s1-6 These buttons tune the radio to the channels that you commit to pushbutton memory (12 Satellite stations). Operating Instructions - Uconnect™ Phone [...]

“Audio Surround” is optimized for fr ont seat passengers for any audio source. This surr ound effect is available for audio from any sour ce – AM/FM/CD/ Satellite Radio or AUX – and is activated through the Electr onic V ehicle Information Center (EVIC). Refer to “Driver-Selectable Surround Sound (DSS)” under “Electr onic V ehicle Inf[...]

VIDEO ENTERT AINMENT SYSTEM (VES)™ — IF EQUIPPED The optional V ideo Entertainment System (VES)™ in- cludes the following components for rear seat entertain- ment: • A diagonal 7 in (17.8 cm) Liquid Crystal Display (LCD) screen integrated into the center console armr est. The screen featur es brightness control for optimum day- time and nig[...]

• The LCD screen swings up fr om the rear of the armr est to allow the rear seat passenger(s) to view the display . NOTE: Close the armrest after the LCD scr een has been raised to its viewing position. • The radio and DVD player controls allow fr ont seat operation for easy setup in the case of younger rear seat passengers. • A battery-power[...]

• T wo wireless infrared headsets allow r ear seat passen- gers to listen to the same or individual audio sources. Audio/V ideo RCA Jacks (AUX Jacks) on the rear of the center console enable the monitor to display video directly from a video camera, connect video games for display on the screen, or play music directly fr om an MP3 player . 1. V i[...]

Center (EVIC). The EVIC features a driver -interactive display which is located in the instrument cluster . The VOLUME button controls the sound level of the sound system. Press the top of the VOLUME button to increase the sound level. Press the bottom of the VOLUME button to decrease the sound level. Press the AUDIO MODE button to select the Compa[...]

CD/DVD DISC MAINTENANCE T o keep a CD/DVD in good condition, take the following precautions: 1. Handle the disc by its edge; avoid touching the surface. 2. If the disc is stained, clean the surface with a soft cloth, wiping from center to edge. 3. Do not apply paper or tape to the disc; avoid scratch- ing the disc. 4. Do not use solvents such as be[...]

CLIMA TE CONTROLS The air conditioning and heating system is designed to make you comfortable in all types of weather . Manual Air Conditioning and Heating System Blower Control The rotary knob on the left contr ols the blower . The control has an OFF posi- tion and four speed settings. The blower will remain on until the con- trol is turned to the[...]

T emperature Control The rotary knob in the center contr ols air temperature. Rotate the contr ol to the left for cooler air temperature and to the right for warmer air tempera- ture. Rotating the contr ol to the ex- treme left pr ovides the coldest setting. Rotating the control to the extr eme right provides the warmest setting. Mode Control The r[...]

• Bi-Level Air flows through the outlets located in the instr u- ment panel and through the outlets located on the floor . Air flows through the r egisters in the back of the center console to the rear seat passengers. These r egisters can be closed to partially block airflow . • Panel Air flows through the outlets located in the instr u- ment [...]

Automatic T emperature Control — If Equipped Automatic Operation The Dual-Zone Climate Control System automatically maintains the climate in the cabin of the vehicle at the comfort levels desired by the driver and passenger . Operation of the system is quite simple. Begin by turning the mode control knob (on the right) to AUTO, and place the blow[...]

Y ou will experience the greatest efficiency by simply allowing the system to function automatically . Selecting the OFF position on the fan control stops the system completely and closes the outside air intake. 72°F (22°C) is the recommended setting for maximum comfort for the average person; however , this may vary . NOTE: The temperature setti[...]

• Extended use of recir culation may cause the windows to fog. If the interior of the windows begin to fog, press the recir culation button to return to outside air . Some temp/humidity conditions will cause captured inte- rior air to condense on windows and hamper visibility . For this reason, the system will not allow r ecirculation to be selec[...]

4 UNDERST ANDING YOUR INSTRUMENT P ANEL 253[...]

The operator can override the AUT O mode setting to change airflow distribution by rotating the mode contr ol knob (on the right) to one of the following positions. • Defrost Air is directed to the windshield thr ough the outlets at the base of the windshield. Air is also directed to the fr ont door windows through the side window demister grille[...]

conditioning. An indicator in the button illuminates when manual compressor operation is selected. NOTE: T o control the air conditioning manually , the mode selector must be moved out of the AUTO position. • Recirculation Contr ol This button can be used to block out smoke, odors, dust, high humidity , or if rapid cooling is desired. The Recir c[...]

W inter Operation Use of the air Recirculation mode during W inter months is not recommended because it may cause window fogging. V acation Storage Any time you store your vehicle or keep it out of service (i.e., vacation) for two weeks or more, r un the air conditioning system at idle for about five minutes in the fresh air and high blower setting[...]

Control Setting Suggestions for V arious W eather Conditions 4 UNDERST ANDING YOUR INSTRUMENT P ANEL 257[...]

[...]

ST ARTING AND OPERA TING CONTENTS 䡵 Starting Procedur es .................... 2 6 3 ▫ Automatic T ransmission ............... 2 6 3 ▫ Normal Starting (T ip Start) ............. 2 6 4 ▫ Extreme Cold W eather (Below ⫺ 20°F Or ⫺ 29°C) ............................ 2 6 4 ▫ If Engine Fails T o Start ................ 2 6 4 ▫ After Starti[...]

▫ Gear Ranges ........................ 2 7 6 䡵 AutoStick 威 — If Equipped ............... 2 8 0 ▫ Operation ......................... 2 8 0 䡵 All-Wheel Drive (A WD) — If Equipped ...... 2 8 1 䡵 Driving On Slippery Surfaces ............. 2 8 2 ▫ Acceleration ........................ 2 8 2 ▫ T raction ........................... 2 [...]

▫ T ire Identification Number (TIN) ......... 3 0 0 ▫ T ire T erminology And Definitions ......... 3 0 1 ▫ T ire Loading And T ire Pr essure .......... 3 0 2 䡵 T ires — General Information ............. 3 0 6 ▫ T ire Pressur e ....................... 3 0 6 ▫ T ire Inflation Pressur es ................ 3 0 7 ▫ T ire Pressur es For Hi[...]

▫ E85 Usage In Non-Flex Fuel V ehicles ...... 3 2 7 ▫ MMT In Gasoline .................... 3 2 8 ▫ Materials Added T o Fuel ............... 3 2 9 ▫ Fuel System Cautions ................. 3 2 9 ▫ Carbon Monoxide W arnings ............ 3 3 0 䡵 Adding Fuel ......................... 3 3 0 ▫ Fuel Filler Cap (Gas Cap) .............. 3 3 0 ?[...]

ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instr uct all other occupants to buckle their seat belts. W ARNING! Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or othe[...]

Normal Starting (Tip Start) NOTE: Normal starting of either a cold or a warm engine is obtained without pumping or pressing the accelerator pedal. Do not press the accelerator . Use the Fob with Integrated Key to briefly turn the ignition switch to the ST AR T position and release it as soon as the starter engages. The starter motor will continue t[...]

W ARNING! (Continued) • Do not attempt to push or tow your vehicle to get it started. V ehicles equipped with an automatic transmission cannot be started this way . Unburned fuel could enter the catalytic converter and once the engine has started, ignite and damage the converter and vehicle. If the vehicle has a dis- charged battery , booster cab[...]

The engine block heater cord is r outed under the hood on the driver side of the vehicle. It has a removable cap that is located on the driver side of the Integrated Power Module. W ARNING! Remember to disconnect the cord before driving. Damage to the 1 10-1 15 V olt electrical cord could cause electrocution. AUTOMA TIC TRANSMISSION CAUTION! Damage[...]

W ARNING! It is dangerous to move the shift lever out of P ARK or NEUTRAL if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in reverse. Y ou could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is idling normal[...]

• The electronically-contr olled transmission provides a precise shift schedule. The transmission electr onics are self-calibrating. Therefor e, the first few shifts on a new vehicle may be somewhat abrupt or soft until after the break-in period. This is a normal condition, and pr e- cision shifts will develop within a few shift cycles. The shift[...]

This may result in a slightly dif ferent feeling or r esponse during normal operation in the DRIVE position. After the transmission cools down, it will return to normal operation. Key Ignition Park Interlock This vehicle is equipped with a Key Ignition Park Inter- lock which requir es the shift lever to be placed in P ARK prior to turning the ignit[...]

4. Using the screwdriver , press and hold the override tab through the access port on the center console. 5. Move the shift lever into the NEUTRAL position. 6. The vehicle may then be started in NEUTRAL. 7. Reinstall the override cover . Four-Speed Automatic T ransmission – If Equipped NOTE: Under extreme cold temperatur es (-6°F (-21°C) and wh[...]

Gear Ranges P ARK This range supplements the parking brake by locking the transmission. The engine can be started in this range. Never use P ARK while the vehicle is in motion. Apply the parking brake when leaving the vehicle in this range. When parking on a flat surface, place the shift lever in the P ARK position first, and then apply the parking[...]

The following indicators should be used to ensure that you have engaged the shift lever in the P ARK position: • When shifting into P ARK move the shift lever all the way forward and left until it stops and is fully seated. • Look at the shift indicator display on the instrument panel to ensure it is in the P ARK position. REVERSE This range is[...]

“D” (Overdrive) This range is used for most city and highway driving. It provides the smoothest up shifts and down shifts and the best fuel economy . Select the “3” range when frequent transmission shifting occurs when using the Overdrive range, such as when operating the vehicle under heavy loading conditions (in hilly terrain, traveling i[...]

occur only to prevent engine overspeed while downshifts occur earlier than in other gear range selections. CAUTION! Never race the engine with the brakes on and the vehicle in gear , and never hold the vehicle on an incline without applying the brakes. These practices can cause overheating and damage to the transmis- sion. T orque Converter Clutch [...]

T ransmission Limp Home Mode The transmission is monitored for abnormal conditions. If a condition is detected that could cause damage, the transmission automatically shifts into second gear . The transmission remains in second gear despite the forwar d gear selected. P ARK, REVERSE, and NEUTRAL will continue to operate. This reset featur e allows [...]

Five-Speed Automatic T ransmission – If Equipped Shifting from DRIVE to P ARK or REVERSE should be done only after the accelerator pedal is released and the vehicle is stopped. Be sure to keep your foot on the brake pedal when moving the shift lever between these gears. Gear Ranges P ARK This range supplements the parking brake by locking the tra[...]

W ARNING! Never use the P ARK position as a substitute for the parking brake. Always apply parking brake fully when parked to guard against vehicle movement and possible injury or damage. The following indicators should be used to ensure that you have engaged the shift lever in the P ARK position: • When shifting into P ARK, move the shift lever [...]

CAUTION! Coasting the vehicle or driving for any other reason with shift lever in NEUTRAL can result in transmis- sion damage. W ARNING! Do not coast in NEUTRAL and never turn of f the ignition to coast down a hill. These are unsafe practices that limit your response to changing traffic or road conditions. Y ou might lose control of the vehicle and[...]

If vehicle acceleration worsens, or the transmission no longer shifts, the transmission is most likely operating in the Limp Home Mode. In this mode, the transmission will remain in the curr ent gear until the vehicle is brought to a stop. After the vehicle has stopped, P ARK, REVERSE, and NEUTRAL will continue to operate. Sec- ond gear will operat[...]

Electronic Range Select (ERS) – If Equipped Electronic Range Select (ERS) allows the driver to limit the highest available transmission gear , providing you with more contr ol of the vehicle. ERS allows you to maximize engine braking, eliminate undesirable upshifts, and improve overall vehicle performance. This system can also provide you with mo[...]

move the shift lever to the right or left (D+/D-) while in the DRIVE position. The gear position will display in the instrument cluster . In the AutoStick 威 mode, the transmis- sion will shift up and down when left or right (D-/D+) is manually selected by the driver . It will remain in the selected gear until another upshift or downshift is cho- [...]

vehicle automatically shifts into A WD mode. Automatic A WD operation could be activated by outside tempera- ture, wheel slip, or other pr edetermined conditions (there may be a slight delay for A WD engagement after a wheel slip condition occurs). A WD can also be manually se- lected by moving the shift lever into the AutoStick 威 mode (+/-) or a[...]

W ARNING! Rapid acceleration on slippery surfaces is dangerous. Unequal traction can cause sudden pulling of the rear wheels. Y ou could lose control of the vehicle and possibly have an accident. Accelerate slowly and carefully whenever there is likely to be poor traction (ice, snow , wet mud, loose sand, etc.). T raction When driving on wet or slu[...]

Flowing/Rising W ater W ARNING! Do not drive on or across a road or path where water is flowing and/or rising (as in storm run-off). Flow- ing water can wear away the road or path’s surface and cause your vehicle to sink into deeper water . Furthermore, flowing and/or rising water can carry your vehicle away swiftly . Failure to follow this warni[...]

CAUTION! (Continued) • Driving through standing water may cause dam- age to your vehicle’ s drivetrain components. Al- ways inspect your vehicle’ s fluids (i.e., engine oil, transmission, axle, etc.) for signs of contamination (i.e., fluid that is milky or foamy in appearance) after driving through standing water . Do not con- tinue to operat[...]

POWER STEERING The standard power steering system will give you good vehicle response and incr eased ease of maneuverability in tight spaces. The system will provide mechanical steering capability if power assist is lost. If for some reason the power assist is interr upted, it will still be possible to steer your vehicle. Under these condi- tions, [...]

checked if a leak is suspected, abnormal noises are apparent, and/or the system is not functioning as antici- pated. Coordinate inspection ef forts through an autho- rized dealer . CAUTION! Do not use chemical flushes in your power steering system as the chemicals can damage your power steering components. Such damage is not covered by the New V eh[...]

The foot operated parking brake is located below the lower left corner of the instrument panel. T o apply the park brake, firmly push the park brake pedal fully . T o release the parking brake, pr ess the park brake pedal a second time and let your foot up as you feel the brake disengage. When the parking brake is applied with the ignition switch i[...]

make it difficult to move the shift lever out of P ARK. The parking brake should always be applied whenever the driver is not in the vehicle. W ARNING! • Never use the P ARK position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle movement and possible injury or damage. • Never le[...]

ANTI-LOCK BRAKE SYSTEM The Anti-Lock Brake System (ABS) provides incr eased vehicle stability and brake performance under most braking conditions. The system automatically “pumps” the brakes during severe braking conditions to pr event wheel lock-up. The Electronic Brake For ce Distribution (EBD) prevents the rear wheels fr om over-braking and [...]

W ARNING! • The ABS contains sophisticated electronic equip- ment that may be susceptible to interference caused by improperly installed or high output radio transmitting equipment. This interference can cause possible loss of anti-lock braking capa- bility . Installation of such equipment should be performed by qualified professionals. • Pumpi[...]

ELECTRONIC BRAKE CONTROL SYSTEM Y our vehicle is equipped with an advanced electronic brake control system that include Anti-Lock Brake Sys- tem (ABS), T raction Control System (TCS), Brake Assist System (BAS), and the Electronic Stability Pr ogram (ESP). All four of these systems work together to enhance vehicle stability and control in various dr[...]

Brake Assist System (BAS) This system complements the ABS by optimizing the vehicle braking capability during emergency brake ma- neuvers. This system detects an emergency braking situ- ation by sensing the rate and amount of brake application and then applies optimum pressur e to the brakes. This can help reduce braking distances. Applying the bra[...]

power may also be reduced to assist in counteracting the condition of oversteer or understeer and help the vehicle maintain the desired path. The ESP uses sensors in the vehicle to determine the path that the driver intends to steer the vehicle and compares it to the actual path of the vehicle. When the actual path does not match the intended path,[...]

The ESP system has two available operating modes: ESP On This is the normal operating mode for the ESP . Whenever the vehicle is started, the ESP system will be in this mode. This mode should be used for most driving conditions. The ESP should only be turned OFF for specific r easons as noted in the following paragraphs. Partial Off The “Partial [...]

Indicator Light” should go out. However , if the light remains on, have the ESP and BAS checked at your authorized dealer as soon as possible. ESP/BAS Malfunction Indicator Light and ESP/TCS Indicator Light The Malfunction Indicator Light for the ESP is combined with the BAS indicator . The “ESP/ BAS Malfunction Indicator Light” and the “ES[...]

TIRE SAFETY INFORMA TION Tire Markings NOTE: • P (Passenger) - Metric tir e sizing is based on U.S. design standards. P-Metric tir es have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. • European-Metric tir e sizing is based on European design standards. T ires designed to this standar d [...]

T ires designed to this standard have the letter “T” molded into the sidewall preceding the size designa- tion. Example: T145/80D18 103M. • High flotation tire sizing is based on U.S. design standards and it begins with the tir e diameter molded into the sidewall. Example: 31x10.5 R15 L T . T ire Sizing Chart EXAMPLE: Size Designation: P = Pa[...]

EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions — The maximum speed corresponding to the speed symbol should only be a[...]

Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however , the date code may only be on one side. T ires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle.[...]

Tire T erminology and Definitions T erm Definition B-Pillar The vehicle B-Pillar is a structural member of the body located between the front and r ear door (of a four-door vehicle) r unning from the sill to the r oof. Cold T ire Pressure Cold tir e inflation pr essure is defined as the tir e pressur e after the vehicle has not been driven for at l[...]

Tire Loading and T ire Pressure T ire Placard Location NOTE: The proper cold tir e inflation pressur e is listed on the driver’s side B-Pillar . T ire and Loading Information Placard This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) total weight your vehicle can carry 3) tire size de[...]

Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. Y ou will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tir e size, and cold tire inflation pressur es specified on the T ire and Loading Information placard and in the “V ehicle Loading”[...]

4. The resulting figure equals the available amount of cargo and luggage load capacity . For example, if “XXX” amount equals 1,400 lbs (635 kg) and there will be five 150 lb (68 kg) passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs (295 kg) (since 5 x 150 = 750, and 1400 – 750 = 650 lbs [295 kg]). [...]

5 ST ARTING AND OPERA TING 305[...]

W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMA TION Tire Pressure Proper tir e inflation pressur e is essential to the safe and satisfactory [...]

W ARNING! (Continued) • Unequal tire pressures from one side of the ve- hicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recom- mended cold tire inflation pressure. Economy Improper inflation pr essures can cause uneven wear patterns to develop across the tir e tread. These ab[...]

CAUTION! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Inflation pressur es specified on the placard ar e always “cold tire inflation pr essure.” Cold tir e inflation pressur e is defined as the tire pr [...]

loading may be requir ed for high-speed vehicle opera- tion. Refer to original equipment or an authorized tire dealer for recommended safe operating speeds, loading and cold tire inflation pr essures. W ARNING! High speed driving with your vehicle under maxi- mum load is dangerous. The added strain on your tires could cause them to fail. Y ou could[...]

W ARNING! T emporary use spare tires are for emergency use only . W ith these tires, do not drive more than 50 mph (80 km/h). T emporary use spare tires have limited tread life. When the tread is worn to the tread wear indicators, the temporary use spare tire needs to be replaced. Be sure to follow the warnings, which apply to your spare. Failure t[...]

W ARNING! The limited-use spare tires are for emergency use only . Installation of this limited-use spare tire affects vehicle handling. W ith this tire, do not drive more than 50 mph (80 km/h). Keep inflated to the cold tire inflation pressure listed on either your tire placard or limited-use spare tire and wheel assembly . Replace (or repair) the[...]

T read Wear Indicators T read wear indicators are in the original equipment tir es to help you in determining when your tires should be replaced. These indicators are molded into the bottom of the tr ead grooves. They will appear as bands when the tr ead depth becomes 1/16 in (2 mm). When the tread is worn to the tread wear indicators, the tir e sh[...]

Keep dismounted tires in a cool, dry place with as little exposure to light as possible. Pr otect tires fr om contact with oil, grease, and gasoline. Replacement Tires The tires on your new vehicle pr ovide a balance of many characteristics. They should be inspected regularly for wear and correct cold tir e inflation pressur e. The manu- facturer s[...]

W ARNING! (Continued) • Failure to equip your vehicle with tires having adequate speed capability can result in sudden tire failure and loss of vehicle control. CAUTION! Replacing original tires with tires of a different size may result in false speedometer and odometer read- ings. SELF-SEALING TIRES — IF EQUIPPED A non-hardening viscous sealan[...]

These effects can be r educed by timely rotation of tir es. The benefits of rotation ar e especially worthwhile with aggressive tr ead designs such as those on all season type tires. Rotation will incr ease tread life, help to maintain mud, snow and wet traction levels, and contribute to a smooth, quiet ride. Refer to “Maintenance Schedule” for[...]

The tire pr essure will vary with temperatur e by about 1 psi (6.9 kPa) for every 12°F (6.5°C). This means that when the outside temperature decr eases, the tire pr essure will decrease. T ire pr essure should always be set based on cold inflation tire pr essure. This is defined as the tir e pressur e after the vehicle has not been driven for at [...]

For example, your vehicle may have a recommended cold (parked for more than thr ee hours) placard pr essure of 30 psi (207 kPa). If the ambient temperature is 68°F (20°C) and the measured tir e pressur e is 27 psi (186 kPa), a temperature dr op to 20°F (-7°C) will decrease the tir e pressur e to approximately 23 psi (158 kPa). This tir e pressu[...]

NOTE: • The TPMS is not intended to replace normal tir e care and maintenance or to provide warning of a tir e failure or condition. • The TPMS should not be used as a tire pr essure gauge while adjusting your tire pr essure. • Driving on a significantly under-inflated tir e causes the tire to over heat and can lead to tire failur e. Under-in[...]

The matching full size spare wheel and tir e assembly (if equipped) has a TPM sensor . The matching full size spare can be used in place of any of the four road tir es. The TPMS will only monitor the pressur e in the full size spare when it is used in place of a road tir e. Otherwise, a spare with a pressur e below the low-pressur e limit will not [...]

3. Accumulation of snow or ice around the wheels or wheel housings. 4. Using tire chains on the vehicle. 5. Using wheels/tires not equipped with TPM sensors. V ehicles with Full Size Spare 1. The matching full size spare wheel and tire assembly has a TPM sensor that can be monitored by the TPMS. 2. If you install the full size spare in place of a r[...]

5. Once you repair or replace the original r oad tire, and reinstall it on the vehicle in place of the compact spar e, the TPMS will update automatically and the TPM T elltale Light will turn OFF , as long as no tire pressur e is below the low-pressur e warning limit in any of the four active road tir es. The vehicle may need to be driven for up to[...]

T ire Pressure Monitoring Low Pressure W arnings The TPM T elltale Light will illuminate in the instrument cluster and a chime will sound when tire pr essure is low in one or mor e of the four active road tir es. In addition, the EVIC will display one or more low pr essure messages (Left Fr ont, Left Rear , Right Front, Right Rear) for thr ee secon[...]

turn off. The vehicle may need to be driven for up to 20 minutes above 15 mph (25 km/h) in order for the TPMS to receive this information. Check TPMS W arning If a system fault is detected, the TPM T elltale Light will flash on and off for 75 seconds and then r emain on solid. The system fault will also sound a chime. In addition, the EVIC will dis[...]

1. Signal interference due to electronic devices or driving next to facilities emitting the same radio frequencies as the TPM sensors. 2. Installing aftermarket window tinting that contains materials that may block radio wave signals. 3. Accumulation of snow or ice around the wheels or wheel housings. 4. Using tire chains on the vehicle. 5. Using w[...]

3. After driving the vehicle for up to 20 minutes above 15 mph (25 km/h), the TPM T elltale Light will flash on and off for 75 seconds and then r emain on solid. In addition, the EVIC will display a ⬙ CHECK TPM SYS- TEM ⬙ message for three seconds and then display dashes (- -) in place of the pressur e value. 4. For each subsequent ignition swi[...]

FUEL REQUIREMENTS 2.7L Engine The 2.7L engine is designed to meet all emissions regulations and pr ovide excel- lent fuel economy and performance when using high-quality unleaded “regular” gasoline having an octane rating of 87. The use of premium gasoline is not r ecom- mended, as it will not provide any benefit over r egular gasoline in these[...]

Reformulated Gasoline Many areas of the country r equire the use of cleaner burning gasoline referr ed to as “Reformulated Gasoline.” Reformulated gasoline contains oxygenates and are spe- cifically blended to reduce vehicle emissions and im- prove air quality . The manufacturer supports the use of r eformulated gaso- line. Properly blended r e[...]

If a Non-FFV vehicle is inadvertently fueled with E85 fuel, the engine will have some or all of these symptoms: • operate in a lean mode • OBD II “Malfunction Indicator Light” on • poor engine performance • poor cold start and cold driveability • increased risk for fuel system component corr osion T o fix a Non-FFV vehicle inadvertent[...]

Materials Added to Fuel All gasoline sold in the United States is requir ed to contain effective deter gent additives. Use of additional detergents or other additives is not needed under normal conditions and they would result in additional cost. Therefor e, you should not have to add anything to the fuel. Fuel System Cautions CAUTION! Follow these[...]

Carbon Monoxide W arnings W ARNING! Carbon monoxide (CO) in exhaust gases is deadly . Follow the precautions below to prevent carbon monoxide poisoning: • Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas, which can kill. Never run the engine in a closed area, such as a garage, and never sit in a parked vehic[...]

NOTE: When removing the fuel filler cap, lay the cap tether in the hook, located on the fuel filler cap door reinfor cement. CAUTION! • Damage to the fuel system or emissions control system could result from using an improper fuel tank filler tube cap (gas cap). (Continued) Fuel Filler Door Gas Cap T ether Hook 5 ST ARTING AND OPERA TING 331[...]

CAUTION! (Continued) • A poorly fitting gas cap could let impurities into the fuel system. • A poorly fitting gas cap may cause the “Malfunc- tion Indicator Light (MIL)” to turn on. • T o avoid fuel spillage and overfilling, do not “top off” the fuel tank after filling. When the fuel nozzle “clicks” or shuts off, the fuel tank is [...]

”gASCAP” message will appear in the odometer or a “Check Gascap” message will display in the Electronic V ehicle Information Center (EVIC) (if equipped). If this occurs, tighten the fuel filler cap properly and pr ess the TRIP ODOMETER button to turn of f the message. If the problem continues, the message will appear the next time the vehic[...]

Gross V ehicle Weight Rating (GVWR) The GVWR is the total allowable weight of your vehicle. This includes driver , passengers, and cargo. The total load must be limited so that you do not exceed the GVWR. Gross Axle Weight Rating (GA WR) The GA WR is the maximum capacity of the front and r ear axles. Distribute the load over the front and r ear axl[...]

Loading T o load your vehicle properly , first figure out its empty weight, axle-by-axle and side-by-side. Store heavier items down low and be sure you distribute their weight as evenly as possible. Stow all loose items securely befor e driving. If weighing the loaded vehicle shows that you have exceeded either GA WR, but the total load is within t[...]

exceed the GVWR. Refer to “V ehicle Loading/V ehicle Certification Label” in “Starting and Operating” for further information. Gross T railer W eight (GTW) The GTW is the weight of the trailer plus the weight of all cargo, consumables, and equipment (permanent or tem- porary) loaded in or on the trailer in its ⬙ loaded and ready for opera[...]

Frontal Area The frontal ar ea is the maximum height multiplied by the maximum width of the front of a trailer . T railer Sway Control The trailer sway control is a telescoping link that can be installed between the hitch receiver and the trailer tongue that typically provides adjustable friction associated with the telescoping motion to dampen any[...]

W ARNING! • An improperly adjusted weight distributing hitch system may reduce handling, stability , braking performance, and could result in an accident. • W eight distributing systems may not be compat- ible with surge brake couplers. Consult with your hitch and trailer manufacturer or a reputable rec- reational vehicle dealer for additional [...]

T railer T owing Weights (Maximum T railer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/T ransmission Frontal Area Max. GTW (Gross T railer Wt.) Max. T ongue Wt. (See Note) 2.7L & 3.5L Rear Wheel Drive (R WD) Automatic 22 sq ft (2.04 sq m) 1,000 lbs (454 kg) 100 lbs (4[...]

T railer and T ongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer . This places 10% to 15% of the Gross T railer W eight (GTW) on the tow hitch of your vehicle. Loads balanced over the wheels or heavier in the rear can cause the trailer to sway severely side to side which will cause loss of control of the v[...]

NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options or dealer-installed options must be considered as part of the total load on your vehicle. Refer to the “T ire and Loading Information” placard for the maximum combined weight of occupants and cargo for your vehi[...]

W ARNING! (Continued) • Make certain that the load is secured in the trailer and it will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be difficult for the driver to control. Y ou could lose control of your vehicle and have an accident. • When hauling cargo or towing a trailer ,[...]

W ARNING! (Continued) 4. T ongue weight rating for the trailer hitch utilized. (This requirement may limit the ability to always achieve the 10% to 15% range of tongue weight as a percentage of total trailer weight.) T owing Requirements – T ires − Do not attempt to tow a trailer while using a compact spare tir e. − Proper tir e inflation pre[...]

− An electronically actuated trailer brake contr oller is requir ed when towing a trailer with electronically actuated brakes. When towing a trailer equipped with a hydraulic surge actuated brake system, an electr onic brake controller is not r equired. − T railer brakes are recommended for trailers over 1,000 lbs (454 kg) and requir ed for tra[...]

The T railer T ow Package may include a four and seven- pin wiring harness. Use a factory approved trailer har - ness and connector . NOTE: Do not cut or splice wiring into the vehicles wiring harness. The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector . Refer to the following illustratio[...]

T owing Tips Before setting out on a trip, practice turning, stopping, and backing up the trailer in an area located away fr om heavy traffic. Automatic T ransmission The DRIVE range can be selected when towing. How- ever , if frequent shifting occurs while in this range, select a lower gear range using the “3” range (if equipped) or the AutoSt[...]

specified for “police, taxi, fleet, or frequent trailer tow- ing.” Refer to “Maintenance Schedule” for the proper maintenance intervals. Electronic Speed Control – If Equipped − Do not use in hilly terrain or with heavy loads. − When using the speed control, if you experience speed drops gr eater than 10 mph (16 km/h), disengage until[...]

RECREA TIONAL TOWING (BEHIND MOTORHOME, ETC.) T wo-Wheel Drive and All-Wheel Drive Recreational towing (with all four wheels on the gr ound) is allowed ONL Y if the rear driveshaft is removed and the transmission is in NEUTRAL (for both RWD and A WD vehicles). W ARNING! If the driveshaft is removed, the vehicle can roll even if the transmission is [...]

WHA T T O DO IN EMERGENCIES CONTENTS 䡵 Hazard W arning Flasher ................ 3 5 0 䡵 If Y our Engine Overheats ................ 3 5 0 䡵 Jacking And T ire Changing ............... 3 5 1 ▫ Jack Location/Spare T ire Stowage ........ 3 5 2 ▫ Preparations For Jacking ............... 3 5 4 ▫ Jacking And Changing a T ire ............ 3 5 4 [...]

HAZARD W ARNING FLASHER The Hazard W arning flasher switch is located in the switch bank near the top center of the instrument panel. Press the switch to turn on the Hazar d W arning flasher . When the switch is activated, all directional turn signals will flash on and off to warn oncoming traffic of an emer gency . Press the switch a second time t[...]

CAUTION! Driving with a hot cooling system could damage your vehicle. If the temperature gauge reads “H,” pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on the “H,” turn the engine off immediately and call for service. W ARNING! [...]

W ARNING! (Continued) • The jack is designed to use as a tool for changing tires only . The jack should not be used to lift the vehicle for service purposes. The vehicle should be jacked on a firm level surface only . A void ice or slippery areas. Jack Location/Spare Tire Stowage The jack and spare tir e are both stowed under an access cover in t[...]

4. Remove the spare tire. 5. Remove the fastener securing the jack. W ARNING! A loose tire or jack thrown forward in a collision or hard stop could endanger the occupants of the ve- hicle. Always stow the jack parts and the spare tire in the places provided. Spare T ire Fastener Jack Fastener 6 WHA T TO DO IN EMERGENCIES 353[...]

Preparations for Jacking 1. Park the vehicle on a firm, level surface as far from the edge of the roadway as possible. A void icy or slippery areas. W ARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough of f the road to avoid being hit when operating the jack or changing the wheel. 2. Set the [...]

W ARNING! (Continued) • Block the wheel diagonally opposite the wheel to be raised. • Set the parking brake firmly and set an automatic transmission in P ARK; a manual transmission in REVERSE. • Never start or run the engine with the vehicle on a jack. • Do not let anyone sit in the vehicle when it is on a jack. • Do not get under the veh[...]

2. If equipped with steel wheels, do not remove the wheel cover at this time. If equipped with aluminum wheels where the center cap covers the lug nuts, use the lug wrench to pry the center cap of f carefully befor e raising the vehicle. W ARNING! T o avoid possible personal injury , handle the wheel covers with care to avoid contact with the metal[...]

4. Place the jack underneath the lift area that is closest to the flat tire. T urn the jack screw clockwise to firmly engage the jack saddle with the lift area of the sill flange. Lug Nut Removal/Installation 1 — T ighten 2 — Loosen Front Jacking Location 6 WHA T TO DO IN EMERGENCIES 357[...]

5. Raise the vehicle just enough to remove the flat tire and install the spare tir e. W ARNING! Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. 6. Remove the lug nuts, wheel cover (if equipped), and tire. Remove the cov[...]

avoid the risk of forcing the vehicle of f the jack, do not tighten the lug nuts fully until the vehicle is lowered to the ground. 9. Lower the vehicle to the ground by turning the jack handle counterclockwise. 10. Finish tightening the lug nuts. Push down on the wrench while tightening for incr eased leverage. Alternate lug nuts until each nut has[...]

W ARNING! The limited-use spare tires are for emergency use only . Installation of this limited-use spare tire affects vehicle handling. W ith this tire, do not drive more than 60 mph (100 km/h). Keep inflated to the cold tire inflation pressure listed on either your tire placard or limited-use spare tire and wheel assembly . Replace (or repair) th[...]

3. Align the valve notch in the wheel cover with the valve stem on the wheel. Install the cover by hand, snapping the cover over the two lug nuts. Do not use a hammer or excessive force to install the cover . 4. Install the remaining lug nuts with the cone shaped end of the nut toward the wheel. Lightly tighten the lug nuts. T o avoid the risk of f[...]

7. For vehicles equipped with center caps, install the center cap by hand. Do not use a hammer or excessive force to install the center cap. 8. Stow the jack, tools, and spare tire. Make sur e the base of the jack faces the rear of the vehicle befor e tightening down the fastener . W ARNING! A loose tire or jack thrown forward in a collision or har[...]

Preparations for Jump-Start The battery is stored under an access cover in the tr unk. Remote battery posts are located on the right side of the engine compartment for jump-starting. NOTE: The remote battery posts ar e viewed by standing on the right side of the vehicle looking over the fender . Remote Battery Posts 1 — Remote Negative (-) Post 2[...]

W ARNING! • T ake care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is on. Y ou can be injured by moving fan blades. • Remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact. Y ou could be seriously injured. • Batteries contain su[...]

CAUTION! Failure to follow these procedures could result in damage to the charging system of the booster vehicle or the discharged vehicle. 1. Connect the positive (+) end of the jumper cable to the remote positive (+) post of the dischar ged vehicle. 2. Connect the opposite end of the positive (+) jumper cable to the positive (+) post of the boost[...]

8. Disconnect the opposite end of the positive (+) jumper cable from the positive (+) post of the booster battery . 9. Disconnect the positive (+) end of the jumper cable from the r emote positive (+) post of the discharged vehicle. If frequent jump-starting is r equired to start your vehicle you should have the battery and charging system in- spec[...]

CAUTION! • When “rocking” a stuck vehicle by moving be- tween 1st and REVERSE, do not spin the wheels faster than 15 mph (24 km/h), or drivetrain damage may result. • Revving the engine or spinning the wheels too fast may lead to transmission overheating and failure. It can also damage the tires. Do not spin the wheels above 30 mph (48 km/h[...]

T owing This V ehicle Behind Another V ehicle Flatbed towing is recommended. DO NOT tow an A WD vehicle with the rear wheels on the gr ound unless the rear driveshaft is r emoved and the transmission is in NEUTRAL. V ehicles WITHOUT A WD may be towed (with rear wheels on the ground) with the transmission in NEU- TRAL under the following conditions:[...]

CAUTION! (Continued) • Do not push or tow this vehicle with another vehicle as damage to the bumper fascia and trans- mission may result. If you must use the accessories (wipers, defrosters, etc.) while being towed, the key must be in the ON position, not the ACC position. Make certain the transmission remains in NEUTRAL. T owing This V ehicle Be[...]

[...]

MAINT AINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment — 2.7L ............. 3 7 3 䡵 Engine Compartment — 3.5L ............. 3 7 4 䡵 Engine Compartment — 5.7L ............. 3 7 5 䡵 Onboard Diagnostic System — OBD II ...... 3 7 6 ▫ Loose Fuel Filler Cap ................. 3 7 6 䡵 Emissions Inspection And Maintenance Programs .....[...]

▫ Adding W asher Fluid ................. 3 9 0 ▫ Exhaust System ..................... 3 9 1 ▫ Cooling System ..................... 3 9 3 ▫ Brake System ....................... 3 9 9 ▫ Automatic T ransmission ............... 4 0 1 ▫ All Wheel Drive (A WD) – If Equipped ..... 4 0 3 ▫ Rear Axle .......................... 4 0 3 ▫ Appe[...]

ENGINE COMP ARTMENT — 2.7L 1 — Integrated Power Module 6 — Air Cleaner Filter 2 — Engine Oil Dipstick 7 — Engine Oil Fill 3 — Brake Fluid Reservoir Access Cover 8 — Remote Jump Start (Positive Battery Post) 4 — Engine Coolant Reservoir 9 — W asher Fluid Reservoir 5 — Power Steering Fluid Reservoir 7 MAINT AINING YOUR VEHICLE 373[...]

ENGINE COMP ARTMENT — 3.5L 1 — Integrated Power Module 6 — Engine Oil Fill 2 — Air Cleaner Filter 7 — Engine Oil Dipstick 3 — Brake Fluid Reservoir Access Cover 8 — Remote Jump Start (Positive Battery Post) 4 — Engine Coolant Reservoir 9 — W asher Fluid Reservoir 5 — Power Steering Fluid Reservoir 374 MAINT AINING YOUR VEHICLE[...]

ENGINE COMP ARTMENT — 5.7L 1 — Integrated Power Module 6 — Air Cleaner Filter 2 — Coolant Pressur e Cap 7 — Engine Oil Fill 3 — Brake Fluid Reservoir Access Cover 8 — Engine Oil Dipstick 4 — Engine Coolant Reservoir 9 — Remote Jump Start (Positive Battery Post) 5 — Power Steering Fluid Reservoir 10 — W asher Fluid Reservoir 7 [...]

ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems ar e operating properly , your vehicle will provide excellent performance and fuel economy , as wel[...]

TRIP ODOMETER button to turn of f the message. If the problem continues, the message will appear the next time the vehicle is started. A loose, impr operly installed, or damaged fuel filler cap may also turn on the MIL. EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS In some localities, it may be a legal requir ement to pass an inspection of your veh[...]

4. Approximately 15 seconds later , one of two things will happen: a. The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn OFF the ignition or start the engine. This means that your vehicle’s OBD II system is not ready and you should not proceed to the I/M station. b. The MIL will not flash at all and [...]

your vehicle. Refer to these Service Manuals before attempting any procedur e yourself. NOTE: Intentional tampering with emissions control systems may void your warranty and could result in civil penalties being assessed against you. W ARNING! Y ou can be badly injured working on or around a motor vehicle. Only do service work for which you have th[...]

CAUTION! (Continued) • Y our vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance intervals. Do not use chemical flushes in these components as the chemicals can damage your engine, transmission, power steering or air condi- tioning. Such damage is not covered [...]

regular intervals, such as every fuel stop. The best time to check the engine oil level is about five minutes after a fully warmed engine is shut off. Checking the oil while the vehicle is on level ground will improve the accuracy of the oil level r eadings. Maintain the oil level in the “SAFE” range. Adding 1.0 qt (1.0 L) of oil when the readi[...]

CAUTION! Do not use chemical flushes in your engine oil as the chemicals can damage your engine. Such damage is not covered by the New V ehicle Limited W arranty . Engine Oil V iscosity (SAE Grade) – 2.7L and 5.7L Engines SAE 5W -20 engine oil is recommended for all operating temperatures. This engine oil impr oves low temperature starting and ve[...]

Synthetic Engine Oils Y ou may use synthetic engine oils provided the recom- mended oil quality requir ements are met, and the r ecom- mended maintenance intervals for oil and filter changes are followed. Materials Added to Engine Oil Do not add any supplemental materials, other than leak detection dyes, to the engine oil. Engine oil is an engi- ne[...]

Engine Air Cleaner Filter Refer to “Maintenance Schedule” for further information. W ARNING! The air induction system (air cleaner , hoses, etc.) can provide a measure of protection in the case of engine backfire. Do not remove the air induction system (air cleaner , hoses, etc.) unless such removal is necessary for repair or maintenance. Make [...]

W ARNING! • Battery fluid is a corrosive acid solution and can burn or even blind you. Do not allow battery fluid to contact your eyes, skin, or clothing. Do not lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area imme- diately with large amounts of water . • Battery gas is flammable and explosive. Kee[...]

W ARNING! (Continued) • The battery in this vehicle has a vent hose that should not be disconnected and should only be replaced with a battery of the same type (vented). CAUTION! • It is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative [...]

W ARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air condi- tioning system. Some unapproved refrigerants are flammable and can explode, injuring you. Other unapproved refrigerants or lubricants can cause the system to fail, requiring costly repairs. Refer to W arranty Information Book, located on t[...]

1. Remove the access door in the cowl screen by pressing the retaining clips. 2. Slide the lid on the filter adapter forward and down and remove the used filter . 3. Install the new filter with arrows pointing in the direction of airflow , which is toward the rear of the vehicle (text and arrows on the filter will indicate this). Access Door 388 MA[...]

Refer to “Maintenance Schedule” for the proper mainte- nance intervals. Body Lubrication Locks and all body pivot points, including such items as seat tracks, door hinge pivot points and rollers, liftgate, tailgate, sliding doors and hood hinges, should be lubri- cated periodically with a lithium based grease, such as MOP AR 威 Spray White Lub[...]

Windshield Wiper Blades Clean the rubber edges of the wiper blades and the windshield periodically with a sponge or soft cloth and a mild nonabrasive cleaner . This will remove accumula- tions of salt or road film. Operation of the wipers on dry glass for long periods may cause deterioration of the wiper blades. Always use washer fluid when using t[...]

The fluid reservoir will hold nearly 1 gal (4 L) of washer fluid when the message “Low W asher Fluid” appears in the Electronic V ehicle Information Center (EVIC) (if equipped). W ARNING! Commercially available windshield washer solvents are flammable. They could ignite and burn you. Care must be exercised when filling or working around the was[...]

W ARNING! (Continued) • A hot exhaust system can start a fire if you park over materials that can burn. Such materials might be grass or leaves coming into contact with your exhaust system. Do not park or operate your ve- hicle in areas where your exhaust system can contact anything that can burn. CAUTION! • The catalytic converter requires the[...]

NOTE: Intentional tampering with emissions control systems can result in civil penalties being assessed against you. In unusual situations involving grossly malfunctioning engine operation, a scorching odor may suggest sever e and abnormal catalyst overheating. If this occurs, stop the vehicle, turn off the engine and allow it to cool. Service, inc[...]

Coolant Checks Check engine coolant (antifreeze) pr otection every 12 months (before the onset of fr eezing weather , where applicable). If the engine coolant (antifreeze) is dirty or rusty in appearance, the system should be drained, flushed, and refilled with fr esh coolant. Check the front of the radiator for any accumulation of bugs, leaves, et[...]

CAUTION! • Mixing of engine coolant (antifreeze) other than specified HOA T engine coolant (antifreeze), may result in engine damage and may decrease corro- sion protection. If a non-HOA T engine coolant (antifreeze) is introduced into the cooling system in an emergency , it should be replaced with the specified engine coolant (antifreeze) as soo[...]

Please review these r ecommendations for using Hybrid Organic Additive T echnology (HOA T) engine coolant (antifreeze). When adding engine coolant (antifr eeze): • The manufacturer r ecommends using MOP AR 威 Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hybrid Organic Additive T echnology) or equivalent. • Mix a minimum solution of 5[...]

W ARNING! • The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety pre- caution. Never add engine coolant (antifreeze) when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat causes pressure to build up in the cooling system. T o prevent scalding or injury , do not remove [...]

When additional engine coolant (antifreeze) is needed to maintain the proper level, it should be added to the coolant bottle. Do not overfill. Points to Remember NOTE: When the vehicle is stopped after a few miles (kilometers) of operation, you may observe vapor coming from the fr ont of the engine compartment. This is nor- mally a result of moistu[...]

• Do not change the thermostat for Summer or W inter operation. If replacement is ever necessary , install ONL Y the correct type thermostat. Other designs may result in unsatisfactory coolant performance, poor gas mileage, and increased emissions. Brake System In order to assur e brake system performance, all brake system components should be in[...]

Use only manufacturer’s r ecommended brake fluid. Re- fer to “Fluids, Lubricants, and Genuine Parts” in “Main- taining Y our V ehicle” for further information. W ARNING! • Use only manufacturer’s recommended brake fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Y our V ehicle” for further information. U[...]

W ARNING! (Continued) • Do not allow petroleum based fluid to contami- nate the brake fluid. Brake seal components could be damaged, causing partial or complete brake failure. This could result in an accident. Use only brake fluid that has been in a tightly closed container to avoid contamination from for eign matter or moisture. Automatic T rans[...]

Fluid and Filter Changes Refer to “Maintenance Schedule” for further information. If the transmission is disassembled for any reason, the fluid and filter should be changed. Selection of Lubricant It is important that the proper lubricant is used in the transmission to assure optimum transmission perfor - mance. Use only manufacturer ’s recom[...]

All Wheel Drive (A WD) – If Equipped The all wheel drive system consists of a transfer case and front dif ferential. The exterior surface of these compo- nents should be inspected for evidence of fluid leaks. Confirmed leaks should be repair ed as soon as possible. The transfer case fluid fill/inspection plug is located in the middle of the rear [...]

Appearance Care and Protection from Corrosion Protection of Body and Paint from Corrosion V ehicle body care requir ements vary according to geo- graphic locations and usage. Chemicals that make roads passable in snow and ice, and chemicals that are sprayed on trees and r oad surfaces during other seasons, are highly corrosive to the metal in your [...]

• Use a high quality cleaner wax, such as MOP AR 威 Cleaner W ax or equivalent to remove road film, stains and to protect your paint finish. T ake care never to scratch the paint. • A void using abrasive compounds and power buffing that may diminish the gloss or thin out the paint finish. CAUTION! • Do not use abrasive or strong cleaning mat[...]

• If you carry special cargo such as chemicals, fertilizers, de-icer salt, etc., be sure that such materials ar e well packaged and sealed. • If a lot of driving is done on gravel roads, consider mud or stone shields behind each wheel. • Use MOP AR 威 T ouch Up Paint or equivalent on scratches as soon as possible. Y our authorized dealer has[...]

• Do not use any harsh solvents or any other form of protectants on Stain Repel pr oducts. Interior Care Use MOP AR 威 Fabric Cleaner or equivalent to clean fabric upholstery and MOP AR 威 Carpet Cleaner or equivalent for carpeting. Interior T rim should be cleaned starting with a damp cloth, or MOP AR 威 Satin Select or equivalent. Do not use[...]

T o minimize the possibility of scratching the lenses and reducing light output, avoid wiping with a dry cloth. T o remove r oad dirt, wash with a mild soap solution fol- lowed by rinsing. Do not use abrasive cleaning components, solvents, steel wool or other aggressive material to clean the lenses. Glass Surfaces All glass surfaces should be clean[...]

Replace the belts if they appear frayed or worn or if the buckles do not work properly . Cleaning the Center Console Cupholders Clean with a damp cloth or towel using a mild detergent with the cupholder in the center console. NOTE: The cupholder cannot be removed. FUSES Integrated Power Module The Integrated Power Module (IPM) is located in the eng[...]

CAUTION! • When installing the integrated power module cover , it is important to ensure the cover is prop- erly positioned and fully latched. Failure to do so may allow water to get into the integrated power module and possibly result in an electrical system failure. • When replacing a blown fuse, it is important to use only a fuse having the [...]

Cavity Car- tridge Fuse Mini- Fuse Description 9 ——— 10 30 Amp Pink — W indshield W iper 1 1 30 Amp Pink — Anti-Lock Brake System (ABS) V alves – If Equipped 12 40 Amp Green — Radiator Fan 13 50 Amp Red — Anti-Lock Brake System (ABS) Pump Motor – If Equipped 1 4——— Cavity Car- tridge Fuse Mini- Fuse Description 15 50 Amp Red[...]

Rear Power Distribution Center There is also a power distribution center located in the trunk under the spar e tire access panel. This center contains fuses and relays. Opening The Access Panel Rear Power Distribution Center 412 MAINT AINING YOUR VEHICLE[...]

CAUTION! • When installing the power distribution center cover , it is important to ensure the cover is prop- erly positioned and fully latched. Failure to do so may allow water to get into the power distribution center and possibly result in an electrical system failure. • When replacing a blown fuse, it is important to use only a fuse having [...]

Cavity Car- tridge Fuse Mini- Fuse Description 5 30 Amp Pink — Heated Seats – If Equipped 6 — 20 Amp Y ellow Fuel Pump 7 ——— 8 — 15 Amp Blue Diagnostic Link Connec- tor (DLC)/W ireless Con- trol Module (WCM)/ W ireless Ignition Node (WIN) 9 — 20 Amp Y ellow Power Outlet 1 0——— 11 * ——— 12 * ——— Cavity Car- tridge F[...]

Cavity Car- tridge Fuse Mini- Fuse Description 2 2——— 2 3——— 2 4——— 2 5——— 2 6——— 27 — 10 Amp Red Occupant Restraint Con- troller (ORC) 28 — 10 Amp Red Ignition Run, AC Heater Control/Headlights/ Occupant Restraint Con- troller (ORC) 29 — 5 Amp Orange Cluster/Electronic Sta- bility Program (ESP) – If Equipped/P[...]

Cavity Car- tridge Fuse Mini- Fuse Description 38 — 10 Amp Red Cargo Light/Satellite Receiver (SDARS) V ideo – If Equipped/V ehicle Information Module – If Equipped 39 — 10 Amp Red Heated Mirrors – If Equipped 40 — 5 Amp Orange Auto Inside Rearview Mirror – If Equipped/ Heated Seats – If Equipped/Switch Bank 4 1——— 42 30 Amp P[...]

VEHICLE STORAGE If you are leaving your vehicle dormant for mor e than 21 days, you may want to take these steps to protect your battery . • Disconnect the negative cable from the battery . • Anytime you store your vehicle, or keep it out of service (i.e., vacation) for two weeks or more, r un the air conditioning system at idle for about five [...]

Exterior Bulb Number Low Beam Headlamp (Standard Halogen) ...... 9006 Low Beam Headlamp – High Intensity Discharge (HID) ......................... D 1 S (Serviced at Authorized Dealer) High Beam Headlamp .................... 9005 Front Park/T urn Lamp ................... 3157A Front Fog Lamp – If Equipped ............ PSX24W Front Side Marker .[...]

CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol. 3. Disconnect the bulb fr om the socket assembly and install the replacement bulb. 4. Reinstall the bulb and socket assembly into the head- lamp assembly , a[...]

3 — Park/T urn Lamp Bulb 4 — Side Marker Lamp Bulb 420 MAINT AINING YOUR VEHICLE[...]

Low Beam Headlamp, High Beam Headlamp, and Park/T urn Lamp — Models with High Intensity Discharge Headlamps (HID) HID Headlamps The headlamps are a type of high voltage dischar ge tube. High voltage can remain in the cir cuit even with the headlamp switch off and the key r emoved. Because of this, you should not attempt to service a headlamp bulb[...]

Backup Lamp, Side Marker Lamp, T ail/T urn Lamp, and T ail/Stop Lamp 1. Open the trunk. 2. Remove two fasteners from the back of the taillamp assembly . 3. Pull back the trunk liner . 4. Remove the remaining fastener from the back of the taillamp assembly . 5. Push the electrical connector locking tab to the side. 6. Disconnect the electrical conne[...]

8. T urn the appropriate bulb and socket assembly coun- terclockwise to r emove it from the taillamp assembly . 1 — Backup Lamp Bulb 2 — Side Marker Lamp Bulb 7 MAINT AINING YOUR VEHICLE 423[...]

9. Disconnect the bulb fr om the socket assembly and install the replacement bulb. 10. Reinstall the bulb and socket assembly into the taillamp assembly , and then turn it clockwise. 3 — T ail/T urn Lamp Bulb 4 — T ail/Stop Lamp Bulb 424 MAINT AINING YOUR VEHICLE[...]

1 1. Reinstall the taillamp assembly , fasteners, electrical connector , and trunk liner . 12. Close the trunk. License Lamp 1. Remove the screws securing the lamp to the rear fascia. 2. Remove the bulb and socket assembly . 3. Disconnect the bulb fr om the socket assembly and install the replacement bulb. 4. Reinstall the bulb and socket assembly [...]

FLUID CAP ACITIES U.S. Metric Fuel (Approximate) 2.7 Liter Engine 18 Gallons 68 Liters 3.5 Liter Engine without All Wheel Drive 18 Gallons 68 Liters 3.5 Liter Engine with All Wheel Drive 19 Gallons 72 Liters 5.7 Liter Engine 19 Gallons 72 Liters Engine Oil with Filter 2.7 Liter Engine (SAE 5W -20, API Certified) 6.0 Quarts 5.7 Liters 3.5 Liter Engi[...]

U.S. Metric Cooling System * 2.7 Liter Engine (MOP AR 威 Antifreeze/Coolant 5 Y ear/100,000 Mile Formula or equivalent) 9.9 Quarts 9.4 Liters 3.5 Liter Engine without All Wheel Drive (MOP AR 威 Antifreeze/ Coolant 5 Y ear/100,000 Mile Formula or equivalent) 1 1.1 Quarts 10.5 Liters 3.5 Liter Engine with All Wheel Drive (MOP AR 威 Antifreeze/Cool[...]

FLUIDS, LUBRICANTS, AND GENUINE P ARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant MOP AR 威 Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hybrid Or- ganic Additive T echnology) or equivalent. Engine Oil – 2.7L Engine Use API Certified SAE 5W -20 Engine Oil, meeting the requir ements of Chrysler Material Standard M[...]

Chassis Component Fluid, Lubricant, or Genuine Part Automatic T ransmission MOP AR 威 A TF+4 威 Automatic T ransmission Fluid or equivalent li- censed A TF+4 威 product. Brake Master Cylinder MOP AR 威 DOT 3 and SAE J1703 should be used or equivalent. If DOT 3 brake fluid is not available, then DOT 4 is acceptable. Use only recommended brake fl[...]

[...]

MAINTENANCE SCHEDULES CONTENTS 䡵 Emissions Control System Maintenance ...... 4 3 2 䡵 Maintenance Schedule .................. 4 3 2 ▫ Required Maintenance Intervals .......... 4 3 4 8 M A I N T E N A N C E S C H E D U L E S[...]

EMISSIONS CONTROL SYSTEM MAINTENANCE The Scheduled Maintenance services listed in bold type must be done at the times or mileages specified to ensure the continued proper functioning of the emissions contr ol system. These and all other maintenance services in- cluded in this manual, should be done to provide best vehicle performance and reliabilit[...]

NOTE: • The oil change indicator message will not monitor the time since the last oil change. Change your vehicle’s oil if it has been six months since your last oil change, even if the oil change indicator message is NOT illuminated. • Change your engine oil more often if you drive your vehicle off-r oad for an extended period of time. • U[...]

• Check the fluid levels of the coolant reservoir , brake master cylinder , and power steering, add as needed. • Check all lights and other electrical items for correct operation. At Each Oil Change • Change the engine oil filter . • Inspect the brake hoses and lines. CAUTION! Failure to perform the required maintenance items may result in [...]

6,000 Miles (10,000 km) or 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 12,000 Miles (20,000 km) or 12 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tir[...]

18,000 Miles (30,000 km) or 18 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Inspect the rear axle fluid. Inspect the front axle fluid — All Wheel Drive (A WD). Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 24,000 Miles (40,000 km) or 24 Months M[...]

30,000 Miles (50,000 km) or 30 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Replace the spark plugs (5.7L Engine). ❏ Inspect the transfer case fluid — All Wheel Drive (A WD). ❏ Adjust parking brake on vehicles equipped with four-wheel di[...]

42,000 Miles (70,000 km) or 42 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 48,000 Miles (80,000 km) or 48 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate t[...]

54,000 Miles (90,000 km) or 54 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Inspect the rear axle fluid. Inspect the front axle fluid — All Wheel Drive (A WD). Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 8 M A I N T E N A N C E S C H E D U L E[...]

60,000 Miles (100,000 km) or 60 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Replace the spark plugs (5.7L Engine). ❏ Replace the air conditioning filter (if equipped) ❏ Inspect the brake linings; replace if necessary . ❏ Adjust parking [...]

66,000 Miles (1 10,000 km) or 66 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 72,000 Miles (120,000 km) or 72 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotat[...]

78,000 Miles (130,000 km) or 78 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 84,000 Miles (140,000 km) or 84 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate[...]

90,000 Miles (150,000 km) or 90 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Replace the spark plugs (5.7L Engine). ❏ Inspect and replace PCV valve if necessary . † ❏ Inspect the rear axle fluid. Inspect the front axle fluid — All Whee[...]

96,000 Miles (160,000 km) or 96 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary . ❏ Replace the air conditioning filter (if equipped) ❏ Inspect the [...]

108,000 Miles (180,000 km) or 108 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary . ❏ Replace the air conditioning filter (if equipped) ❏ Inspect th[...]

120,000 Miles (200,000 km) or 120 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Replace the air conditioning filter (if equipped) ❏ Replace the spark plugs (5.7L Engine). ❏ Inspect the brake linings; replace if necessary . ❏ Adjust parkin[...]

132,000 Miles (220,000 km) or 132 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary . ❏ Replace the air conditioning filter (if equipped) ❏ Inspect th[...]

144,000 Miles (240,000 km) or 144 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary . ❏ Replace the air conditioning filter (if equipped) ❏ Inspect th[...]

† This maintenance is recommended by the manufactur er to the owner , but is not requir ed to maintain emissions warranty . W ARNING! • Y ou can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, [...]

[...]

IF YOU NEED CONSUMER ASSIST ANCE CONTENTS 䡵 Suggestions For Obtaining Service For Y our V ehicle .............................. 4 5 3 ▫ Prepar e For The Appointment ........... 4 5 3 ▫ Prepar e A List ...................... 4 5 3 ▫ Be Reasonable W ith Requests ............ 4 5 3 䡵 If Y ou Need Assistance ................. 4 5 3 ▫ Chrysl[...]

䡵 Publication Order Forms ................ 4 5 7 䡵 Department Of T ransportation Uniform T ire Quality Grades ........................ 4 5 8 ▫ T readwear ......................... 4 5 9 ▫ T raction Grades ..................... 4 5 9 ▫ T emperature Grades .................. 4 5 9 452 IF YOU NEED CONSUMER ASSIST ANCE[...]

SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty . Discuss additional charges with the service manager . Keep a maintenance log of your vehicle’s[...]

This is why you should always talk to an authorized dealer’s service manager first. Most matters can be re- solved with this process. • If for some reason you ar e still not satisfied, talk to the general manager or owner of the authorized dealer- ship. They want to know if you need assistance. • If an authorized dealership is unable to resol[...]

Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) T o assist customers who have hearing difficulties, the manufacturer has installed special TDD (T elecommuni- cation Devices for the Deaf) equipment at its customer center . Any hearing or speech impair ed customer , who has access to a TDD or a conventional teletypewriter (TTY) in th[...]

W e appreciate that you have made a major investment when you purchased the vehicle. An authorized dealer has also made a major investment in facilities, tools, and training to assure that you ar e absolutely delighted with the ownership experience. Y ou’ll be pleased with their sincere ef forts to resolve any warranty issues or r elated concerns[...]

If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may or der a recall and r emedy campaign. However , NHTSA cannot become involved in individual problems between you, your authorized dealer , and the manufacturer . T o contact NHTSA, you may either call the Aut[...]

vehicle, system, and/or components is written in straightforward language with illustrations, diagrams, and charts. • Diagnostic Procedure Manuals Diagnostic Procedur e Manuals are filled with dia- grams, charts and detailed illustrations. These practi- cal manuals make it easy for students and technicians to find and fix problems on computer -co[...]

in each category is shown on the sidewall of the tires on your vehicle. All passenger car tires must conform to Federal safety requir ements in addition to these grades. T readwear The T readwear grade is a comparative rating, based on the wear rate of the tire when tested under contr olled conditions on a specified government test course. For exam[...]

grade C corresponds to a level of performance, which all passenger car tires must meet under the Federal Motor V ehicle Safety Standard No. 109. Grades B and A repr e- sent higher levels of performance on the laboratory test wheel, than the minimum requir ed by law . W ARNING! The temperature grade for this tire is established for a tire that is pr[...]

INDEX 10[...]

About Y our Brakes ....................... 2 8 7 ABS (Anti-Lock Brake System) .............. 2 9 0 Adding Engine Coolant (Antifreeze) .......... 3 9 5 Adding Fuel ........................... 3 3 0 Adding W asher Fluid ..................... 3 9 0 Additives, Fuel ......................... 3 2 9 Adjustable Pedals ....................... 1 4 3 Air Clea[...]

Auto Unlock, Doors ....................... 3 1 Auto Up Power W indows .................. 3 7 Automatic Dimming Mirror ................. 8 8 Automatic Door Locks ................... 30,31 Automatic Headlights .................... 1 3 4 Automatic Oil Change Indicator .......... 180,189 Automatic T emperature Control (A TC) ......... 2 5 0 Automatic T[...]

Fluid Check ....................... 399,429 Master Cylinder ....................... 3 9 9 Parking ............................. 2 8 7 W arning Light ........................ 1 8 1 Brakes ............................... 3 9 9 Brake/T ransmission Interlock ............... 2 6 9 Break-In Recommendations, New V ehicle ........ 7 7 Brightness, Interior [...]

Coin Holder ........................... 1 6 2 Compact Disc (CD) Maintenance ............. 2 4 6 Compact Spare T ire ...................... 3 0 9 Compass .............................. 1 9 5 Compass Calibration ..................... 1 9 5 Compass V ariance ....................... 1 9 6 Computer , T rip/T ravel .................... 1 9 0 Connector U [...]

Defroster , Rear W indow ................... 1 6 5 Defroster , W indshield ................ 80,248,254 Delay (Intermittent) W ipers ................. 1 4 0 Diagnostic System, Onboard ................ 3 7 6 Dimmer Switch, Headlight ................. 1 3 7 Dipsticks Oil (Engine) .......................... 3 8 0 Power Steering ........................[...]

Jacking ............................. 3 5 1 Jump Starting ......................... 3 6 2 Overheating .......................... 3 5 0 T owing ............................. 3 6 7 Emergency T runk Release ................... 4 0 Emission Control System Maintenance ...... 377,432 Engine .......................... 373,374,375 Air Cleaner .............[...]

Filler Location Fuel ...................... 3 3 0 Filters Air Cleaner .......................... 3 8 4 Air Conditioning .................... 256,387 Engine Oil ........................ 383,428 Engine Oil Disposal .................... 3 8 3 Flashers Hazard W arning ....................... 3 5 0 T urn Signal ...................... 81,137,175 Flash-T [...]

Methanol ............................ 3 2 7 Octane Rating ...................... 326,428 Requirements ......................... 3 2 6 Saver Mode .......................... 1 9 0 Specifications ......................... 4 2 8 T ank Capacity ........................ 4 2 6 Fuel System Caution ..................... 3 3 1 Fueling .......................[...]

Automatic ........................... 1 3 4 Bulb Replacement ...................... 4 1 8 Cleaning ............................ 4 0 7 Delay .............................. 1 3 5 High Beam/Low Beam Select Switch ........ 1 3 7 Lights On Reminder .................... 1 3 6 On W ith W ipers .................... 135,142 Passing .........................[...]

Introduction ............................. 4 Jack Location ........................... 3 5 2 Jack Operation .......................... 3 5 4 Jacking Instructions ...................... 3 5 4 Jump Starting .......................... 3 6 2 Key , Programming ........................ 1 7 Key , Replacement ........................ 1 6 Key , Sentry (Immo[...]

Daytime Running ...................... 1 3 6 Dimmer Switch, Headlight ............. 136,137 Electronic Stability Pr ogram (ESP) Indicator . . . 296 Electronic Thr ottle Control W arning ......... 1 7 4 Engine T emperature W arning .............. 1 7 6 Exterior .............................. 8 1 F o g ............................. 136,178 Hazard W a[...]

W arning (Instrument Cluster Description) ..... 1 7 3 Load Leveling System .................... 1 6 6 Loading V ehicle ...................... 333,335 Capacities ........................... 3 3 5 T i r e s ............................... 3 0 2 Locks ................................. 2 9 Auto Unlock .......................... 3 1 Automatic Door .....[...]

V anity ............................... 9 0 Mode Fuel Saver ........................... 1 9 0 Modifications/Alterations, V ehicle ............. 7 Monitor , T ire Pressur e System ............... 3 1 5 Mopar Parts ......................... 378,456 MTBE/ETBE ........................... 3 2 7 Multi-Displacement Engine System ........... 2 8 7 Multi-Fu[...]

Outside Rearview Mirrors .................. 8 8 Overdrive ............................. 2 7 3 Overhead Console ....................... 1 4 8 Overheating, Engine ................... 175,350 Owner’s Manual (Operator Manual) ......... 4,457 Paint Care ............................. 4 0 4 Panic Alarm ............................ 2 4 Parking Brake ....[...]

Radio Remote Controls .................... 2 4 4 Radio, Satellite (Uconnect 威 studios) ........... 2 3 6 Rear Cupholder ......................... 1 6 2 Rear Seat, Folding ....................... 1 3 1 Rear W indow Defroster ................... 1 6 5 Rear W indow Features .................... 1 6 5 Rearview Mirrors ........................ 8 7 Rec[...]

Satellite Radio Antenna ................. 227,237 Satellite Radio (Uconnect 威 studios) ........... 2 3 6 Schedule, Maintenance .................... 4 3 2 Seat Belt Maintenance .................... 4 0 8 Seat Belt Reminder ....................... 4 9 Seat Belts .......................... 41,42,79 Adjustable Upper Shoulder Anchorage ........ 4 7 An[...]

Service Manuals ........................ 4 5 7 Setting the Clock ................ 202,203,207,216 Settings, Personal ........................ 1 9 7 Shifting ............................... 2 6 6 Automatic T ransmission ............ 266,270,276 Shoulder Belt Upper Anchorage .............. 4 7 Shoulder Belts ........................... 4 2 Signals, T[...]

Sunglasses Storage ....................... 1 4 9 Sunroof Maintenance ..................... 1 5 7 Supplemental Restraint System - Airbag ........ 5 2 Sway Control, T railer ..................... 3 3 7 Synthetic Engine Oil ...................... 3 8 3 System, Remote Starting .................... 2 6 T achometer ............................ 1 7 3 T el[...]

Safety ........................... 297,306 Self-Sealing .......................... 3 1 4 Sizes ............................... 2 9 8 Snow T ires ........................... 3 1 4 Spare T ire ........................... 3 5 2 Spinning ............................ 3 1 1 T railer T owing ........................ 3 4 3 T read W ear Indicators .........[...]

T ransmitter Battery Service (Remote Keyless Entry) .................... 2 4 T ransmitter , Garage Door Opener (HomeLink 威 ) . . 149 T ransmitter Programming (Remote Keyless Entry) .................... 2 0 T ransmitter , Remote Keyless Entry (RKE) ........ 2 0 T ransporting Pets ........................ 7 7 T read W ear Indicators ...............[...]

W arnings and Cautions ..................... 6 W arranty Information ..................... 4 5 6 W asher , Adding Fluid ..................... 3 9 0 W ashers, W indshield ................ 140,141,390 W ashing V ehicle ......................... 4 0 4 W ater Driving Through ...................... 2 8 3 Wheel and Wheel T rim .................... 4 0 6 [...]

Chrysler Group LL C 10D481-126-AC 3rd Edition Printed in U.S.A.[...]