Dodge 2010 Viper SRT10 Roadster manuale d’uso

Viper SR T10 Chrysler Group LLC OWNER’S MANUAL 2010 2010 Viper SRT10 10ZB27-126-AA First Edition Printed in U.S.A. COUPE & ROADSTER[...]

VEHICLES SOLD IN CANADA W ith respect to any V ehicles Sold in Canada, the name Chrysler Group LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefor e. DRIVING AND ALCOHOL Drunken driving is one of the most fr equent causes of accidents. Y our driving ability can be seriously impair ed with blood alcohol [...]

T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION ............................................................ 3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE .............................. 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ............................. 6 9 4 UNDERST ANDING YOUR INSTRUMENT P ANEL .................................. 1 [...]

[...]

INTRODUCTION CONTENTS 䡵 Introduction ........................... 4 䡵 How T o Use This Manual .................. 4 䡵 W arnings And Cautions ................... 6 䡵 V ehicle Identification Number .............. 6 䡵 V ehicle Modifications/Alterations ............ 7 1[...]

INTRODUCTION Congratulations on selecting your new Chrysler Group LLC vehicle. Be assured that it r epresents precision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles. This Owner’s Manual has been prepar ed with the assis- tance of service and engineering specialists to acquaint you with t[...]

1 INTRODUCTION 5[...]

W ARNINGS AND CAUTIONS This Owner’s Manual contains W ARNINGS against op- erating procedur es that could result in an accident or bodily injury . It also contains CAUTIONS against proce- dures that could r esult in damage to your vehicle. If you do not read this entir e manual, you may miss important information. Observe all W arnings and Caution[...]

VEHICLE MODIFICA TIONS/AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death. 1 INTRODUCTION 7[...]

[...]

THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS 䡵 A W or d About Y our Keys ................. 1 2 ▫ Ignition Key Removal .................. 1 2 ▫ Key-In-Ignition Reminder ............... 1 3 䡵 V ehicle Security Alarm System ............. 1 3 ▫ Rearming Of The System ................ 1 3 ▫ T o Arm The System ................... 1 [...]

▫ General Information ................... 2 4 䡵 Door Locks ........................... 2 5 ▫ Manual Door Lock .................... 2 6 ▫ Power Door Locks .................... 2 7 䡵 W indows ............................ 2 8 ▫ Power W indows ...................... 2 8 ▫ Auto-Down Feature ................... 2 9 ▫ W ind Buffeting .....[...]

䡵 Break-In Recommendations ............... 6 3 䡵 Safety T ips ........................... 6 4 ▫ T ransporting Passengers ................ 6 4 ▫ Exhaust Gas ......................... 6 5 ▫ Safety Checks Y ou Should Make Inside The V ehicle ............................. 6 6 ▫ Periodic Safety Checks Y ou Should Make Outside The V ehicle ..[...]

A WORD ABOUT YOUR KEYS Y ou can insert the double-sided keys into the locks with either side up. The authorized dealer that sold you your new vehicle has the key code numbers for your vehicle’s locks. These numbers can be used to order duplicate keys fr om your authorized dealer or a locksmith. Ask your authorized dealer for these numbers and kee[...]

NOTE: The Power Accessory Delay feature allows you to operate the radio and the power windows for two minutes after turning OFF the ignition switch. Removing the key from the ignition switch and opening the driver’s door will cancel this feature. Y our authorized dealership can enable or disable the Power Accessory Delay feature as desired. Key-I[...]

T o Arm the System Remove the key from the ignition switch and either pr ess a power door LOCK switch while the driver’s or passen- ger’s door is open or press the LOCK button on the Remote Keyless Entry (RKE) transmitter . After the last door is closed, or if all doors are closed, the system will arm itself in approximately 16 seconds. During [...]

on the ignition. If this occurs, and you wish to rearm the system, simply repeat either of the pr eviously described arming sequences. • The V ehicle Security Light will remain on steady if the hood or trunk/liftgate is open during the arming process or if ther e is a fault in the system. If you verify that the hood and trunk/liftgate ar e not op[...]

T o Disarm the System There ar e two ways to disarm the system: • Use the key to unlock the driver’s door . The door lock is located on the outside door panel beneath the mirror . • Press the UNLOCK button on the RKE transmitter . The front and r ear park lights and the turn signal lights will flash to acknowledge the signal. NOTE: The vehicl[...]

Electronic Immobilization System — Canada Only The Electronic Immobilization system pr events unautho- rized vehicle operation by disabling the engine. The system does not need to be armed or activated. Operation is automatic, regar dless of whether the vehicle is locked or unlocked. T o Arm the System The Electronic Immobilization system will pa[...]

ILLUMINA TED ENTR Y The interior lights will turn on whenever a door is opened or the liftgate is opened (Coupe models) and the dimmer switch is not in the defeat position. The interior lights will turn on, remain on for appr oxi- mately 30 seconds, and then fade to off if any of the following occur: • A door is opened using the outside door hand[...]

T o Unlock the Doors Press and r elease the UNLOCK button on the RKE transmitter once to unlock the driver’s door or twice to unlock both doors. The park lights and turn signal lights will flash to acknowledge the signal and the illuminated entry system will turn on. In addition, the words DOOR UNLOCKED will flash in the odometer if one door is u[...]

3. T est the feature while outside of the vehicle, by pressing the UNLOCK button on the RKE transmitter with the ignition in the OFF/LOCK position, and the key removed. 4. Repeat these steps if you want to return this featur e to its previous setting. NOTE: Pressing the LOCK button on the RKE transmit- ter while you are in the vehicle will activate[...]

T o Lock the Doors Press and r elease the LOCK button on the RKE transmit- ter to lock the doors. The horn will chirp once and the park lights and turn signal lights will flash to acknowl- edge the signal. Sound Horn with Remote Key Lock This feature will cause the horn to chirp when the doors are locked with the RKE transmitter . This featur e can[...]

Using the Panic Alarm The Panic Alarm unlocks the driver’s door , turns on the interior lights, flashes the park lights and fog lights, and sounds the horn. The Panic Alarm will not work when driving the vehicle. T o turn the Panic Alarm on or off, pr ess and hold the P ANIC button on the RKE transmitter for at least one second and release. The a[...]

3. Press and hold the UNLOCK button for at least five seconds, but no longer then 10 seconds on a previously programmed RKE transmitter . Then, pr ess the P ANIC button while still holding the UNLOCK button. 4. Release both buttons at the same time. A chime will sound to signal that the programming featur e is acti- vated. 5. W ithin 30 seconds, pr[...]

1. Separate the two halves of the RKE transmitter with a coin or similar object. 2. Remove and replace the battery . A void touching the new battery with your fingers. Skin oils may cause battery deterioration. If you touch a battery , clean it with rubbing alcohol. 3. T o assemble the RKE transmitter case, snap the two halves together . 4. T est t[...]

can affect transmitter operation. T o verify if this is the cause, move the vehicle to another area and test RKE transmitter operation. 2. The RKE transmitter may become “out of sync” and will no longer function if operated more than 255 times while out of range of the vehicle (23 ft or 7 m) or if operated while the vehicle battery is dead or d[...]

W ARNING! (Continued) • Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be injured seriously or fatally . Don’t leave the key in the ignition. A child could operate power win- dows, other controls, or move the vehicle. Manual Door Lock The driver’s[...]

Power Door Locks A power door lock switch is on each door trim panel. Use this switch to lock or unlock the doors. NOTE: T o pr event you from accidentally locking your keys in the vehicle, the power door locks will not operate if the key is in the ignition and the driver’s door is open. Electronic Door Lock This vehicle is equipped with a virtua[...]

NOTE: Input from the door handles is ignor ed once the vehicle is moving faster than 5 mph (8 km/h). Automatic Door Locks Programming The Automatic Door Locks feature can be enabled or disabled as follows: 1. Close all doors and place the key in the ignition. 2. Cycle the ignition switch between ON/RUN and OFF/LOCK four times ending up in the OFF/L[...]

• W indows cannot be driven up during Power Acces- sory Delay with a door open. Furthermore, opening the door will stop the window movement immediately if the window is in the process of going up. • The window will lower slightly if it is closed com- pletely when opening the door . The window will return to its fully closed position after closi[...]

T o open the window to a desir ed position, press and hold the WINDOW switch in the first detent. Release the switch when you want the window to stop. Wind Buffeting W ind buffeting can be described as the per ception of pressur e on the ears or a helicopter-type sound in the ears. Y our vehicle may exhibit wind buffeting with the windows down, or [...]

• When all doors are locked (except for RKE transmitter liftgate access). Refer to “Entering the Liftgate with the System Armed — Coupe” under “Security Alarm System” for additional information. The word “DECK” will flash in the odometer when the liftgate is open. W ith the key in the ignition switch, this display will turn off appr[...]

Y ou can also unlatch the trunk lid with the key . The key cylinder is located on the trunk lid. The word “DECK” will flash in the odometer when the trunk lid is open. W ith the key in the ignition switch, this display will turn off appr oximately 40 seconds after switching OFF the ignition, or if the Power Accessory Delay feature is active, it[...]

T runk Emergency Release The trunk of your vehicle is equipped with an emer gency release handle. It is located on the inside of the tr unk lid, near the latch, and is coated so that it glows in a darkened trunk. Pull on the handle to open the trunk. OCCUP ANT RESTRAINTS Some of the most important safety features in your vehicle are the r estraint [...]

way out and then adjusting the belt to the desired length to restrain a child seat or secur e a large item in a seat — if equipped If you will be carrying children too small for adult-sized seat belts, the seat belts or the Lower Anchors and T ether for CHildren (LA TCH) featur e also can be used to hold infant and child restraint systems. For mo[...]

ejection and the risk of injury caused by striking the inside of the vehicle. Everyone in a motor vehicle should be belted at all times. Lap/Shoulder Belts Each seat belt is a combined lap/shoulder belt system. The belt webbing retractor will lock only during very sudden stops or impacts. This feature allows the shoulder portion of the belt to move[...]

W ARNING! (Continued) • T wo people should never be belted into a single seat belt. People belted together can crash into one another in an accident, hurting one another badly . Never use a lap/shoulder belt or a lap belt for more than one person, no matter what their size. Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close t[...]

4. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” W ARNING! • A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt[...]

W ARNING! (Continued) • A belt that is worn under your arm is very danger - ous. Y our body could strike the inside surfaces of the vehicle in a collision, increasing head and neck injury . A belt worn under the arm can cause internal injuries. Ribs aren’t as strong as shoulder bones. W ear the belt over your shoulder so that your strongest bon[...]

W ARNING! • A lap belt worn too high can increase the risk of internal injury in a collision. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as possible and keep it snug. • A twisted belt can’t do its job as well. In a collision, it could even cut into you. Be sure the b[...]

Lap/Shoulder Belt Untwisting Procedure Use the following procedur e to untwist a twisted lap/ shoulder belt. 1. Position the latch plate as close as possible to the anchor point. 2. At about 6 to 12 in (15 to 30 cm) above the latch plate, grasp and twist the belt webbing 180 degrees to cr eate a fold that begins immediately above the latch plate. 3[...]

4. T urn the ignition switch to the ON/RUN position, but do not start the engine. W ait for the Seat Belt Reminder Light to turn off and then pr oceed to the next step. NOTE: Y ou must perform the following steps within 60 seconds of turning the ignition switch to the ON/RUN position. 5. W ithin 60 seconds of turning the ignition switch to the ON/R[...]

How T o Use The Automatic Locking Mode 1. Buckle the combination lap and shoulder belt. 2. Grasp the shoulder portion and pull downward until the entire belt is extracted. 3. Allow the belt to retract. As the belt r etracts, you will hear a clicking sound. This indicates the safety belt is now in the Automatic Locking Mode. How to Disengage The Aut[...]

Seat Belts and Pregnant Women W e r ecommend that pregnant women use the seat belts throughout their pr egnancy . Keeping the mother safe is the best way to keep the baby safe. Pregnant women should wear the lap portion of the belt across the thighs and as snug acr oss the hips as possible. Keep the belt low so that it does not come across the abdo[...]

Driver and Passenger Supplemental Restraint System (SRS) - Airbags This vehicle is equipped with airbags for the driver and passenger as a supplement to the seat belt restraint systems. The driver’s airbag is mounted in the steering wheel. The passenger’s airbag is mounted underneath a cover in the passenger’s side of the instrument panel. Th[...]

The airbags have a multistage inflator design. This allows the airbag to have differ ent rates of inflation that are based on collision severity and occupant size. W ARNING! • No objects should be placed over or near the airbag on the instrument panel, because any such objects could cause harm if the vehicle is in a crash severe enough to cause t[...]

Knee Impact Bolsters The Knee Impact Bolsters help protect the knees of the driver and the passenger , and position everyone for the best interaction with the airbags. While the seat belts are designed to pr otect the driver and passenger in many types of collisions, the airbags will deploy in certain frontal collisions depending on the severity an[...]

− Passenger Airbag Disabled (P AD) Indicator Light − Flex Mat Here are some simple steps you can take to minimize the risk of harm from a deploying airbag: 1. An infant up to one year or approximately 20 lbs (9 kg) should never ride in the vehicle because in the event of a crash, the rear -facing child seat places them too close to the passenge[...]

8. Read the instructions pr ovided with your child re- straint to make sure that you ar e using it properly . 9. Read the instructions provided with your child safety seat or booster seat to make sure that you ar e using it properly . 10. All occupants should AL W A YS wear their lap and shoulder belts properly . 1 1. Position the driver seat and p[...]

The Advanced Front Airbags will not deploy in all fr ontal collisions, including some that may produce substantial vehicle damage — for example, some pole collisions, truck underrides, and angle of fset collisions. On the other hand, depending on the type and location of impact, Advanced Front Airbags may deploy in crashes with little vehicle fro[...]

W ARNING! Ignoring the Airbag W arning Light in your instru- ment panel could mean you won’t have the airbags to protect you in a collision. If the light does not come on, stays on after you start the vehicle, or if it comes on as you drive, have the airbag system checked right away . Driver Airbag/Passenger Airbag Inflator Units The Driver Airba[...]

vehicle to an authorized dealer for service. The Airbag W arning Light will turn on whenever ther e is a fault present, which can af fect the operation of the airbag system. If there is a fault pr esent in the OCS, both the P AD Indicator Light and the Airbag W arning Light will illuminate to show that the passenger airbag is turned off. Should thi[...]

The passenger airbag will not be enabled for most any size child who is seated properly in the passenger seat and for most properly installed child r estraint systems. However , under certain conditions, even with a properly installed child restraint system, the P AD Indicator Light may not be on, even though the airbag is disabled. This can occur [...]

proper airbag deployment. Do not make any modifica- tions to the passenger seat components, assembly , or to the seat cover . If the seat, trim cover , or cushion needs service for any reason, take the vehicle to your autho- rized dealer . Only manufacturer appr oved seat accesso- ries may be used. The following requir ements must be strictly adher[...]

If a Deployment Occurs The airbags are designed to deflate immediately after deployment. NOTE: Front airbags will not deploy in all collisions. This does not mean something is wrong with the airbag system. If you do have a collision, which deploys the airbags, any or all of the following may occur: • The nylon airbag material may sometimes cause [...]

W ARNING! Deployed airbags and seat belt pretensioners cannot protect you in another collision. Have the airbags, seat belt pretensioners, and the front passenger seat belt retractor assembly replaced by an authorized dealer as soon as possible. Also, have the Occupant Restraint Controller System serviced as well. Maintaining Y our Airbag System W [...]

W ARNING! (Continued) • Do not attempt to modify any part of your ad- vanced airbag system. The airbag may inflate accidentally or may not function properly if modi- fications are made. T ake your vehicle to an autho- rized dealer for any advanced airbag system ser- vice. If your seat including your trim cover and cushion needs to be serviced in [...]

NOTE: If the speedometer , tachometer , or any engine related gauges ar e not working, the Occupant Restraint Controller (ORC) may also be disabled. The airbags may not be ready to inflate for your pr otection. Promptly check the fuse block for blown fuses. Refer to the label located on the inside of the fuse block cover for the proper airbag fuses[...]

Infant and Child Restraints • Safety experts recommend that childr en ride rearwar d-facing in the vehicle until they are at least one year old and weigh at least 20 lbs (9 kg). T wo types of child restraints can be used r earward-facing: infant carriers and “convertible” child seats. • The infant carrier is only used rearwar d-facing in th[...]

The belt-positioning booster seat is for children weighing more than 40 lbs (18 kg), but who ar e still too small to fit the vehicle’s seat belts properly . If the child cannot sit with knees bent over the vehicle’s seat cushion while the child’s back is against the seat back, they should use a belt-positioning booster seat. The child and bel[...]

W ARNING! Improper installation can lead to failure of a child restraint. It could come loose in a collision. The child could be injured badly or killed. Follow the manu- facturer’s directions exactly when installing a child restraint. Here are some tips on getting the most out of your child restraint: • Before buying any r estraint system, mak[...]

T o attach a child r estraint tether strap: 1. Move the seat forward. 2. Move the seatback to its full forward position. 3. Remove the child tether access cover by prying either side with a screwdriver or similar tool, as shown. NOTE: While the child tether is in use, keep the access cover in a safe place so that it can be replaced after use of the[...]

6. Move the seat to its farthest rearwar d position. Apply body pressur e to the seat to be sure the seat adjusters have latched. 7. Return the seatback to an upright position. 8. Install the child restraint accor ding to the manufactur- er’s directions. 9. Remove slack from the tether strap accor ding to the child restraint manufactur er’s dir[...]

4. T ighten the lap portion of the belt and allow the excess webbing to retract back to the r etractor . If it still does not make the child restraint secur e, then secure the child restraint with the Child Restraint T ether Anchor . NOTE: Once the belt is in Automatic Locking Mode, you will not be able to pull any more of the webbing out of the re[...]

• A void excessive idling. • Check the engine oil level at every fuel fill. NOTE: A new engine will consume some oil during the first few thousand miles (kilometers) of operation. This should be considered a normal part of the br eak-in and not interpreted as a sign of dif ficulty . SAFETY TIPS T ransporting Passengers NEVER TRANSPOR T P ASSENG[...]

Exhaust Gas W ARNING! Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. T o avoid breathing (CO) follow these safety tips: Do not run the engine in a closed garage or in confined areas any longer than needed to move your vehicle [...]

Safety Checks Y ou Should Make Inside the V ehicle Seat Belts Inspect the belt system periodically , checking for cuts, frays, and loose parts. Damaged parts must be replaced immediately . Do not disassemble or modify the system. Front seat belt assemblies must be r eplaced after a collision. Rear seat belt assemblies must be replaced after a colli[...]

Door Latches Check for positive closing, latching, and locking. Fluid Leaks Check area under vehicle after overnight parking for fuel, engine coolant, oil, or other fluid leaks. Also, if gasoline fumes are detected or if fuel, power steering fluid, or brake fluid leaks are suspected, the cause should be located and corrected immediately . 2 THINGS [...]

[...]

UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 Convertible T op Operation — If Equipped ..... 7 1 ▫ T o Lower The T op ..................... 7 1 ▫ T o Raise The T op ..................... 7 3 ▫ Convertible T op Boot Cover Installation — If Equipped ......................... 7 5 ▫ Convertible T op Boot Cover Removal And Storag[...]

▫ Lights-On Reminder ................... 9 0 ▫ Battery Saver Feature — Exterior Lights ..... 9 0 ▫ Fog Lights .......................... 9 0 ▫ T urn Signals ......................... 9 1 ▫ High Beam/Low Beam Select Switch ....... 9 2 ▫ Flash-T o-Pass ........................ 9 2 ▫ Interior Lights ....................... 9 2 䡵 W in[...]

CONVERTIBLE TOP OPERA TION — IF EQUIPPED W ARNING! The convertible top does not provide the structural protection that a reinforced metal roof does, and the fabric top cannot be expected to prevent the ejection of the occupants of a vehicle in a collision. Therefore, it is important that all occupants wear their seat belts at all times when ridin[...]

3. Depress the button located at the top of the latch and then pull the latch handle downward and r earward. 4. Disengage the latch hook from the windshield r eceiver rod and then pull the latch all the way back to the detent stow position. 5. Pull the convertible top away from the windshield header . 6. Raise both sun visors if so desired. 7. Open[...]

9. Push the leading edge of the top downward to engage the downstack latch. 10. Close the trunk. T o Raise the T op 1. Lower the window in each door at least one inch. 2. Lower both sun visors. 3. Open the trunk. 4. Press downwar d on the convertible top and then press the lever behind the driver seat to release the downstack latch. Convertible T o[...]

5. Manually raise the convertible top until it meets the windshield header . 6. Close the trunk. 7. From inside the vehicle, grasp the handles and pull the convertible top toward the windshield header . Then, push the latch handle forward so that the latch hook engages the windshield receiver r od. Raising Convertible T op Aligning Convertible T op[...]

8. Ensure that the outboar d locating pins are in their respective r eceiving holes in the windshield header and then push the latch handle forward all the way to close the latch. NOTE: Until the convertible top system has had ad- equate time to break-in, it may take a gr eater effort to engage the latch hook and close the latch. However , several [...]

4. Slide the boot cover pocket over the front corner of the convertible top on the driver side of the vehicle. Then, stretch and slide the boot cover pocket over the fr ont corner of the convertible top on the passenger side of the vehicle. 5. T uck the boot cover underneath the leading edge of the convertible top. Attaching Driver Side T ucking Bo[...]

6. On the passenger side of the vehicle, clip the tab under the trunk lid stop and on the outer edge of the quarter panel flange. 7. Push downward on the boot cover pocket to engage the inboard tab. Attaching Passenger Side T ab Engaging Passenger Side T ab 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 77[...]

8. On the driver side of the vehicle, clip the tab under the trunk lid stop and on the outer edge of the quarter panel flange. 9. Push downward on the boot cover pocket to engage the inboard tab. Attaching Driver Side T ab Engaging Driver Side T ab 78 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

10. Push downward on the boot cover behind driver seat to lock down the boot cover . 1 1. Stretch and smooth out the boot cover fr om the rear of vehicle. 12. Close the trunk. 13. Ensure that the forwar d edge of the boot cover is tucked in fully . Locking Boot Cover 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 79[...]

Convertible T op Boot Cover Removal and Storage 1. Open the trunk. 2. On the driver side of the vehicle, pull upward on the boot cover to disengage the inboard tab. 3. Unclip the tab under the trunk lid stop and on the outer edge of the quarter panel flange. Disengaging Driver Side T ab T ab Under T runk Lid Stop 80 UNDERST ANDING THE FEA TURES OF [...]

4. On the passenger side of the vehicle, pull upward on the boot cover to disengage the inboard tab. 5. Unclip the tab under the trunk lid stop and on the outer edge of the quarter panel flange. 6. Slide the boot cover pockets off the fr ont corners of the convertible top. Disengaging Passenger Side T ab T ab Under T runk Lid Stop 3 UNDERST ANDING [...]

7. Fold the outer edges of the boot cover inward. 8. Fold the boot cover again. 9. Place the boot cover into the bag and store it in the trunk or a secur e dry area. 10. Close the trunk. Folding Outer Edges Folding Boot Cover 82 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

MIRRORS Inside Day/Night Mirror Adjust the mirror to center on the view thr ough the rear window . A pivot system allows for horizontal and verti- cal mirror adjustment. Headlight glare can be r educed by moving the small control under the mirr or to the night position (toward the rear of the vehicle). The mirr or should be adjusted while set in th[...]

NOTE: The passenger side convex outside mirror will give a much wider view to the rear , and especially of the lane next to your vehicle. W ARNING! V ehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger side mirror could cause you to collide wi[...]

NOTE: When not in use, return the power mirr or switch to the neutral (off) position to pr event accidental mirror movement. SEA TS Seats are a primary part of the Occupant Restraint System of the vehicle. They need to be used properly for safe operation of the vehicle. W ARNING! • DO NOT allow people to ride in any area of your vehicle that is n[...]

W ARNING! • Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehicle is parked. • Do not ride with the seatback reclined so that the shoulder belt is no longer resting a[...]

TO OPEN AND CLOSE THE HOOD T wo latches must be r eleased to open the hood. 1. Reach into the lower right grille opening and pull the primary hood latch forward. 2. Raise the front of the hood slightly and push the safety catch handle to the right. The safety catch handle is located under the front edge of the hood. Hood Release Lever Hood Safety C[...]

NOTE: Assist props will raise the hood to a normal usage position. If greater access is r equired, the hood may be pushed up at the front, raising the hood beyond the initial opening height. CAUTION! • Do not leave the hood open in areas where strong gusts of wind are likely . Such a place might be by the side of the road where large trucks pass [...]

Headlights and Parking Lights T urn the end of the multifunction lever to the first detent for parking light operation. T urn the end of the lever to the second detent for headlight operation. Headlight Time Delay This feature is particularly useful when exiting your vehicle in an unlit area. It pr ovides the safety of headlight illumination for ab[...]

Daytime Running Lights The fog lights will come on as Daytime Running Lights, whenever the ignition switch is ON, the headlights are off, and the parking brake is of f. The headlight switch must be used for normal night time driving. NOTE: This feature is standar d on all Canadian vehicles and cannot be disabled. For U.S. vehicles, this feature is [...]

NOTE: The fog lights will only operate with the head- lights on low beam. Selecting high beam headlights will turn off the fog lights. T urn Signals Move the multifunction lever upward or downwar d and the corresponding turn signal indicator on the instr u- ment panel will flash to show proper operation of the front and r ear turn signal lights. NO[...]

High Beam/Low Beam Select Switch Pull the multifunction lever toward you to switch the headlights to high beam. Pull the lever a second time to switch the headlights back to low beam. Flash-to-Pass Y ou can signal another vehicle with your headlights by lightly pulling the multifunction lever toward you. This will turn on the high beam headlights u[...]

Courtesy lights are also found in the driver’s foot well, the passenger’s foot well, and in the liftgate on Coupe models. Y ou can turn this light on and off from the dimmer control in the multifunction lever . This light is also controlled automatically by the Illuminated Entry system. Battery Saver Feature — Interior Lights T o pr otect the[...]

Instrument Panel Dimming W ith the parking lights or headlights on, rotate the dimmer contr ol upward to increase the brightness of the instr u- ment panel lights or rotate it down- ward to decr ease the brightness of the instrument panel lights. Interior Light (ON) Rotate the dimmer control completely upward to the second detent to turn on the int[...]

WINDSHIELD WIPERS AND W ASHERS The windshield wiper/washer control lever is on the right side of the steering column. From the of f position, push the windshield wiper/ washer control lever upwar d to the first detent past the intermittent DEL setting for low-speed wiper operation, or to the second detent past the intermittent DEL setting for high-[...]

W ARNING! Sudden loss of visibility through the windshield could lead to an accident. Y ou might not see other vehicles or other obstacles. T o avoid sudden icing of the windshield during freezing weather , warm the windshield with defroster before and during wind- shield washer use. Mist Feature From the of f position, push the windshield wiper/ w[...]

W ARNING! Do not adjust the steering column while driving. Adjusting the steering column while driving or driv- ing with the steering column unlocked, could cause the driver to lose control of the vehicle. Be sure the steering column is locked before driving your ve- hicle. Failure to follow this warning may result in serious injury or death. T ilt[...]

ADJUST ABLE PEDALS This feature allows the driver to move the clutch, brake and accelerator pedals about 3 in (72 mm) forward or rearwar d to allow for greater driving comfort. The ad- justable pedals switch is recessed into the knee bolster beneath the steering column. T o adjust the pedals: 1. Adjust the seat and steering column to a comfortable [...]

CAUTION! Do not place any article under the adjustable pedals or impede its ability to move as it may cause damage to the pedal controls. Pedal travel may become lim- ited if movement is stopped by an obstruction in the adjustable pedal’s path. W ARNING! Do not adjust the pedals while the vehicle is moving. Y ou could lose control and have an acc[...]

3. Slide the pedal either forward or backwar d and rotate it upward or downwar d as desired. 4. T ighten the nut, being careful not to over tighten it. ELECTRICAL POWER OUTLETS Y our vehicle is equipped with 12 V olt (13 Amp) power outlets that can be used to power cellular phones, small electronics and other low power ed electrical accessories. On[...]

NOTE: Do not exceed the maximum power of 160 W atts (13 Amps) at 12 V olts. If the 160 W att (13 Amp) power rating is exceeded the fuse protecting the system will need to be replaced. W ARNING! T o avoid serious injury or death: • Only devices designed for use in this type of outlet should be inserted into any 12 V olt outlet. • Do not touch wi[...]

CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery , even when not in use (i.e., cellular phones, etc.). Eventually , if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent the engine from starting. • Accessories that draw higher power (i.e., [...]

STORAGE A glove box storage compartment is located on the passenger side of the instrument panel. Pull outward on the handle/latch to open this compart- ment. Glove Box Storage Compartment Opening Glove Box Storage Compartment 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 103[...]

REAR WINDOW FEA TURES Rear Window Defroster The rear window defr oster button is located on the climate control panel. Pr ess this button to turn on the rear window defr oster and the heated outside mirrors (if equipped). An indicator in the button will illuminate when the rear window defr oster is on. The rear window defroster automatically turns [...]

UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS 䡵 Instrument Panel Featur es ............... 1 0 7 䡵 Instrument Cluster Descriptions ........... 1 0 8 ▫ Speedometer ....................... 1 0 8 ▫ Message Center ..................... 1 0 9 ▫ Gauges And Indicator Lights ............ 1 1 6 䡵 Setting The Digital Clock ................ 1 1 8[...]

▫ Electronic Serial Number/Sirius Identification Number (ESN/SID) ......... 1 3 0 ▫ Selecting Uconnect™ Multimedia (Satellite) Mode In RBB, RAH, REV And RBK Radios . . 130 ▫ Selecting Uconnect™ Multimedia (Satellite) Mode In RBP , RBU, RAZ, RB1 And RBQ Radios ............................ 1 3 1 ▫ Selecting a Channel ................... 1[...]

INSTRUMENT P ANEL FEA TURES 1 — Air Outlet 7 — Speedometer/Odometer 13 — Climate Control 2 — Sound System Speaker 8 — Oil Pressur e Gauge 14 — ENGINE ST ART Button 3 — Main Message Center 9 — Passenger Airbag Off Light 15 — V oltage Gauge 4 — Fuel Gauge 10 — Passenger Airbag 16 — Engine Coolant T emperature Gauge 5 — Auxil[...]

INSTRUMENT CLUSTER DESCRIPTIONS Speedometer Shows the vehicle’s speed in miles- per-hour (mph) and kilometers-per - hour (km/h). Odometer/T rip Odometer The odometer shows the total distance the vehicle has been driven. NOTE: U.S. Federal regulations r equire that upon trans- fer of vehicle ownership, the seller certify to the pur- chaser the cor[...]

Liquid Crystal Display (LCD) Panel The LCD panel at the bottom of the speedometer displays specific messages for given conditions. These messages are as follows: • The words “DOOR AJAR” will display if a door is not closed completely . In addition, a single chime will sound if you move the vehicle when a door is not closed completely . • Th[...]

Front Fog Light Indicator This indicator will illuminate when the front fog lights are on. Anti-Lock Brake (ABS) W arning Light The amber Anti-Lock Brake W arning Light will turn on and stay on briefly as a bulb check when the ignition is first turned on. If the light does not turn on during starting, see your authorized dealer for service. This li[...]

does not come on when turning the key from OFF/LOCK to ON/RUN, have the condition checked promptly . Certain conditions such as a loose or missing gas cap, poor fuel quality , etc., may illuminate the light after engine start. The vehicle should be serviced if the light remains on thr ough several of your typical driving cycles. In most situations,[...]

NOTE: Leaving the hazard flashers on for extended periods will wear down the battery . Airbag W arning Light This light will turn on for six to eight seconds as a bulb check when the ignition switch is first turned on. If the light does not turn on during starting, remains on after starting, or turns on while driving, have the system checked immedi[...]

Electronic Throttle Control (ETC) Light This light will turn on briefly as a bulb check when turning on the ignition switch. It will also turn on while the engine is running to warn of a problem with the Electr onic Throttle Control (ETC) system. • If the light fails to turn on during the bulb check, see your authorized dealer for service. • If[...]

Accordingly , when the low tire pr essure telltale illumi- nates, you should stop and check your tires as soon as possible and inflate them to the proper pr essure. Driving on a significantly under-inflated tir e causes the tire to overheat and can lead to tir e failure. Under-inflation also reduces fuel ef ficiency and tire tread life and may af f[...]

CAUTION! The T ire Pressure Monitor System (TPMS) has been optimized for the original equipment tires and wheels. The TPMS pressures have been established for the tire size equipped on your vehicle. Undesir- able operation or sensor damage may result when using replacement equipment that is not of the same size, type, and/or style. Aftermarket whee[...]

Gauges and Indicator Lights T achometer This gauge shows engine speed in revolutions- per-minute (RPM) times 1,000. A void excessive engine speeds in any part of the red warning zone, particularly when driving downhill or in lower gears. Skip Shift Indicator Light This indicator is located in the T achometer . When the indicator light turns amber ,[...]

Oil T emperature Gauge This gauge shows the oil temperature. The gauge pointer will likely show higher tempera- tures when driving in hot weather , up moun- tain grades, or in heavy stop and go traffic. If the red W arning Light remains on after the bulb check or turns on while driving, safely bring the vehicle to a complete stop and turn off the e[...]

Fuel Gauge This gauge shows the amount of fuel in the gas tank. The reaction time of the gauge has been slowed to avoid needle fluctuation during pe- riods of high G force cornering. V oltage Gauge This gauge shows the electrical system voltage. The normal operating voltage is from 12 to 14 V olts with the engine running. If the pointer remains at [...]

Clock Setting Procedure 1. T urn the ignition switch to the ON/RUN or ACC position. 2. Using the point of a ballpoint pen or similar object, press either the H (HOUR) or M (MINUTE) button on the radio. The display will show the time. 3. Press the “H” button to set hours or the “M” button to set minutes. The time setting will increase each t[...]

NOTE: Power to operate the radio is supplied through the ignition switch. It must be in the ON or ACC position to operate the radio. PTY (Program T ype) Pressing the INFO button once while in FM mode will turn on the PTY mode for five seconds. If no action is taken during the five second time out, the PTY icon will turn off. Pr essing the TUNE butt[...]

Program T ype Radio Display Soft Rhythm and Blues Soft R&B Sports Sports T alk T alk T op 40 T op 40 W eather W eather By pressing the SEEK button when the PTY icon is displayed, the radio will be tuned to the next frequency station with the same selected PTY name. The PTY function only operates when in the FM and Satellite (if equipped) modes.[...]

T uning Press the TUNE contr ol up or down to increase or decrease the fr equency . If you pr ess and hold the button, the radio will continue to tune until you release the button. The frequency will be displayed and continu- ously updated while the button is pressed. Balance The Balance control adjusts the left-to-right speaker bal- ance. Press th[...]

both AM and FM. This allows a total of 10 AM and 10 FM stations to be locked into memory . Y ou can r ecall the stations stored in SET 2 memory by pr essing the push- button twice. T o Change from Clock to Radio Mode Press the TIME button to change the display between radio frequency and time. General Information This radio complies with Part 15 of[...]

Inserting The Compact Disc CAUTION! This CD player will accept only 4–3/4 in (12 cm) discs only . The use of other sized discs may damage the CD player mechanism. Y ou may either insert or eject a disc with the radio OFF . If you insert a disc with the ignition ON and the radio OFF , the display will show the time of day . If you insert a disc wi[...]

RND — Random Play Press the RND button while the CD is playing to activate Random Play . This feature plays the selections on the compact disc in random order to pr ovide an interesting change of pace. Press the SEEK button to move to the next randomly selected track. Press TUNE FF to fast forwar d through the tracks. Press the FF button a second[...]

The radio uses the following limits for file systems: • Maximum number of directory levels: 15 • Maximum number of files: 255 • Maximum number of folders: 100 • Maximum number of characters in file/folder names: • Level 1: 12 (including a separator ⬙ . ⬙ and a 3-character extension) • Level 2: 31 (including a separator ⬙ . ⬙ and[...]

MPEG Specification Sampling Frequency (kHz) Bit rate (kbps) MPEG-1 Audio Layer 3 48, 44.1, 32 320, 256, 224, 192, 160, 128, 1 12, 96, 80, 64, 56, 48, 40, 32 MPEG-2 Audio Layer 3 24, 22.05, 16 160, 128, 144, 1 12, 96, 80, 64, 56, 48, 40, 32, 24, 16, 8 ID3 T ag information for artist, song title and album title are supported for version 1 ID3 tags. I[...]

Operation Instructions - (CD Mode For MP3 Audio Play) SEEK Button (CD Mode For MP3 Play) Pressing the SEEK + button plays the next MP3 File. Pressing the SEEK ⫺ button plays the beginning of the MP3 file. Pressing the button within the first ten seconds plays the previous file. INFO Button (CD Mode for MP3 Play) Press the INFO button while playin[...]

Operating Instructions - Uconnect™ Multimedia (Satellite Radio) Mode — (If Equipped) Refer to the Uconnect™ Multimedia (Satellite Radio) section of the Owner’s Manual. Operating Instructions - V ideo Entertainment System (VES)™ (If Equipped) Refer to 6 Disc CD/DVD Changer (RDV) section of the Owner’s Manual. Uconnect™ Multimedia (SA T[...]

Electronic Serial Number/Sirius Identification Number (ESN/SID) The Electronic Serial Number/Sirius Identification Num- ber is needed to activate your Sirius Satellite Radio system. T o access the ESN/SID, r efer to the following steps: ESN/SID Access with RBB, RAH, REV and RBK Radios W ith the ignition switch in the ACCESSORY position and the radi[...]

Selecting Uconnect™ Multimedia (Satellite) Mode in RBP , RBU, RAZ, RB1 and RBQ Radios Press the MODE button r epeatedly until the word ⬙ SIRIUS ⬙ appears in the display . These radios will also display the following: • After three seconds, the curr ent channel name and channel number will be displayed for five seconds. • The current pr og[...]

erase any AM or FM pr e-set memory stations. Follow the memory pre-set pr ocedures that apply to your radio. Using the PTY (Program T ype) Button (If Equipped) Follow the PTY button instr uctions that apply to your radio. PTY (SCAN) Button When the desired pr ogram type is obtained, press the SCAN button within five seconds. The radio will play sev[...]

• Dense tree coverage may interr upt reception in the form of short audio mutes. • Driving under wide bridges or along tall buildings can cause intermittent reception. • Placing objects over or too close to the antenna can cause signal blockage. RADIO ANTENNA The radio antenna is located in the windshield. CD/DVD DISC MAINTENANCE T o keep a C[...]

RADIO OPERA TION AND CELLULAR PHONES Under certain conditions, the cellular phone being on in your vehicle can cause erratic or noisy performance from your radio. This condition may be lessened or eliminated by relocating the cellular phone antenna. This condition is not harmful to the radio. If your radio performance does not satisfactorily “cle[...]

Blower Control Use this control to r egulate the amount of air forced thr ough the sys- tem in any mode you select. T urn the control clockwise to incr ease fan speed. T urn the contr ol to the O (Off) position to shut off the fan and to prevent any outside air fr om entering the vehicle. This also turns off the A/C compressor . NOTE: For vehicles [...]

The mode settings are as follows: • Recirculation Contr ol Air is recir culated inside the vehicle. Y ou may choose between Bi-Level and Panel air outlets while in this mode. Use this mode to tempo- rarily block out any outside odors, smoke, or dust and to cool the interior rapidly upon initial start up in very hot or humid weather . • Panel Ai[...]

NOTE: The air conditioning compressor operates in this mode. This dehumidifies the air to help dry the wind- shield. T o impr ove fuel economy , leave in the Defrost mode only when necessary . Air Conditioning Control W ith the fan control in the ON position, push the A/C button to turn on the air conditioning com- pressor . An indicator light abov[...]

• The blower air will heat faster in cold weather if you use only the low blower speeds for the first ten minutes of vehicle operation. • Use of the air Recirculation mode during winter months is not recommended because it may cause window fogging. V acation Storage Anytime you store your vehicle, or keep it out of service (i.e., vacation) for [...]

Control Setting Suggestions for V arious W eather Conditions 4 UNDERST ANDING YOUR INSTRUMENT P ANEL 139[...]

[...]

ST ARTING AND OPERA TING CONTENTS 䡵 Starting Procedur es .................... 1 4 4 ▫ Normal Starting ..................... 1 4 4 ▫ If Engine Fails T o Start ................ 1 4 6 ▫ After Starting ....................... 1 4 7 䡵 Manual T ransmission ................... 1 4 7 ▫ Recommended Shift Speeds ............. 1 4 9 ▫ Skip Shift[...]

▫ Anti-Lock Brake System ............... 1 5 8 䡵 T ire Safety Information ................. 1 6 1 ▫ T ire Markings ....................... 1 6 1 ▫ T ire Identification Number (TIN) ......... 1 6 5 ▫ T ire T erminology And Definitions ......... 1 6 6 ▫ T ire Loading And T ire Pressur e .......... 1 6 7 䡵 T ires — General Information [...]

▫ MMT In Gasoline .................... 1 8 3 ▫ Materials Added T o Fuel ............... 1 8 3 ▫ Fuel System Cautions ................. 1 8 4 ▫ Carbon Monoxide W arnings ............ 1 8 5 䡵 Adding Fuel ......................... 1 8 5 ▫ Fuel Filler Cap (Gas Cap) .............. 1 8 5 䡵 T railer T owing ........................ 1 8 7 䡵[...]

ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instr uct any other occupant to buckle their seat belt. W ARNING! • Never leave children alone in a vehicle. Leaving children in a vehicle unattended is dangerous for a number of reasons. A child or ot[...]

NOTE: • Y ou must disarm the security system in or der to start the engine. Refer to “Security Alarm System” in “Things T o Know Befor e Starting Y our V ehicle” for further information. • Normal starting of either a cold or a warm engine does not requir e pumping or pressing the accelerator pedal. However , if the engine has not starte[...]

6. Press the r ed ENGINE ST AR T button located on the instrument panel. Release the button when the engine starts. If Engine Fails to Start CAUTION! T o prevent damage to the starter , do not crank the engine for more than 15 seconds at a time. W ait 10 to 15 seconds before trying again. W ARNING! • Never pour fuel or other flammable liquid into[...]

W ARNING! (Continued) • Do not attempt to push or tow your vehicle to get it started. Unburned fuel could enter the catalytic converter and once the engine has started, ignite and damage the converter and vehicle. If the vehicle has a discharged battery , booster cables may be used to obtain a start from a booster battery or the battery in anothe[...]

Y our vehicle is equipped with a high tor que capacity dual disc clutch. The clutch pedal must be fully pressed to the floor during each shift. As you release the clutch pedal, lightly press the accelerator pedal. CAUTION! Failure to press the clutch pedal fully to the floor may cause increased shift efforts, and may result in dam- age to the clutc[...]

into REVERSE with the ignition key OFF . This is normal operation of the transmission reverse inhibitor system. • Shifting gears during cold weather may requir e an increased ef fort until the transmission lubricant is warm. This is normal and not harmful to the transmis- sion. • Due to the high performance nature of your drivetrain, a certain [...]

Skip Shift Indicator Light There ar e times when you must shift the transmis- sion directly fr om first gear into fourth gear instead of from first gear into second gear . This is to help you get the best possible fuel economy from your vehicle. This occurs when engine coolant is higher than 106°F (41°C), and vehicle speed is greater than 12 mph [...]

DRIVING ON SLIPPER Y SURF ACES Acceleration W ARNING! Rapid acceleration on slippery surfaces is dangerous. Y ou could lose control of the vehicle and possibly have an accident. Accelerate slowly and carefully whenever there is likely to be poor traction (ice, snow , wet, mud, loose sand, etc.). T raction When driving on wet or slushy roads, it is [...]

DRIVING THROUGH W A TER Driving through water mor e than a few inches/ centimeters deep will requir e extra caution to ensure safety and prevent damage to your vehicle. Flowing/Rising W ater W ARNING! Do not drive on or across a road or path where water is flowing and/or rising (as in storm run-off). Flow- ing water can wear away the road or path?[...]

CAUTION! (Continued) • Driving through standing water may cause dam- age to your vehicle’ s drivetrain components. Al- ways inspect your vehicle’ s fluids (i.e., engine oil, transmission/transaxle, axle, etc.) for signs of con- tamination (i.e., fluid that is milky or foamy in appearance) after driving through standing water . Do not continue[...]

POWER STEERING The standard power steering system will give you good vehicle response and incr eased ease of maneuverability in tight spaces. The system will provide mechanical steering capability if power assist is lost. If for some reason the power assist is interr upted, it will still be possible to steer your vehicle. Under these condi- tions, [...]

checked if a leak is suspected, abnormal noises are apparent, and/or the system is not functioning as antici- pated. Coordinate inspection ef forts through an autho- rized dealer . CAUTION! Do not use chemical flushes in your power steering system as the chemicals can damage your power steering components. Such damage is not covered by the New V eh[...]

T o apply the parking brake, grasp the handle and pull it rearwar d until you feel resistance. T o r elease the parking brake, grasp the handle and pull it slightly while pressing the button on the end of the handle. When the button drops into the handle (releasing the lock), guide the handle down- ward to its stop and then r elease the button and [...]

BRAKE SYSTEM Y our vehicle is equipped with dual hydraulic brake systems. If either of the two hydraulic systems loses normal capability , the remaining system will still function. However , there will be some loss of overall braking effectiveness. Y ou may notice increased pedal travel during application, gr eater pedal force r equired to slow or [...]

Safe Operating T ips W ARNING! T o use your brakes and accelerator more safely , follow these tips: • Do not “ride” the brakes by resting your foot on the pedal. This could overheat the brakes and result in unpredictable braking action, longer stopping distances, or brake damage. • When descending mountains or hills, repeated braking can ca[...]

NOTE: During severe braking conditions, a pulsing sensation may occur and a clicking noise will be heard. This is normal, indicating that the ABS is functioning. The ABS conducts a low-speed self-test at about 12 mph (20 km/h). If you have your foot lightly on the brake while this test is occurring, you may feel slight pedal movement. The movement [...]

W ARNING! (Continued) • Pumping of the anti-lock brakes will diminish their effectiveness and may lead to an accident. Pumping makes the stopping distance longer . Just press firmly on your brake pedal when you need to slow down or stop. • The ABS cannot prevent the natural laws of phys- ics from acting on the vehicle, nor can it increase braki[...]

Anti-Lock Brake W arning Light The “Anti-Lock Brake W arning Light” will turn on and stay on briefly as a bulb check when the ignition is first turned on. If the light does not turn on during starting, have it repair ed promptly . This light also illuminates at vehicle start-up to indicate that the ABS self-check is in pr ocess. If the light re[...]

NOTE: • P (Passenger) - Metric tir e sizing is based on U.S. design standards. P-Metric tir es have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. • European-Metric tir e sizing is based on European design standards. T ires designed to this standar d have the tire size molded into the side[...]

T ire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standar ds ⴖ ....blank.... ⴖ = Passenger car tire based on Eur opean design standards LT = Light truck tir e based on U.S. design standards T = T emporary spar e tire 31 = Overall diameter in inches (in) 215 = Section width in millimeters (mm) 65 = As[...]

EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corr esponding to its load index under certain operating conditions — The maximum speed corresponding to the speed symbol should only be [...]

Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however , the date code may only be on one side. T ires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle.[...]

Tire T erminology and Definitions T erm Definition B-Pillar The vehicle B-Pillar is a structural member of the body located between the front and r ear door (of a four-door vehicle) running from the sill to the r oof. Cold T ire Pressure Cold tire inflation pr essure is defined as the tire pr essure after the vehicle has not been driven for at leas[...]

Tire Loading and T ire Pressure T ire Placard Location NOTE: The proper cold tir e inflation pressure is listed on the driver’s side B-Pillar . T ire and Loading Information Placard This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) total weight your vehicle can carry 3) tire size des[...]

Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. Y ou will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tir e size, and cold tire inflation pressur es specified on the T ire and Loading Information placard and in the “V ehicle Loading”[...]

available cargo and luggage load capacity is 650 lbs (295 kg) (since 5 x 150 = 750, and 1400 – 750 = 650 lbs [295 kg]). 5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing a trailer[...]

170 ST ARTING AND OPERA TING[...]

W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMA TION Tire Pressure Proper tir e inflation pressure is essential to the safe and satisfactory o[...]

W ARNING! (Continued) • Unequal tire pressures from one side of the ve- hicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recom- mended cold tire inflation pressure. Economy Improper inflation pr essures can cause uneven wear patterns to develop across the tir e tread. These ab[...]

CAUTION! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Inflation pressur es specified on the placard are always “cold tire inflation pr essure.” Cold tire inflation pr essure is defined as the tire pr es[...]

Tire Pressures for High Speed Operation The manufacturer advocates driving at safe speeds within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high speeds, maintaining correct tir e inflation pressure is very important. Increased tir e pressure and r educed vehicle loading may be requir ed for hi[...]

W ARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure some- one. DO NOT spin your vehicle’s wheels faster than 30 mph (48 km/h) or for more than 30 seconds continuously when you are stuck, and do not let anyone near a spinning wheel, no matt[...]

Life of Tire The service life of a tire is dependent upon varying factors including, but not limited to: • Driving style • T ire pr essure • Distance driven W ARNING! T ires and the spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. Y ou could los[...]

W ARNING! • DO NOT use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change sus- pension dimensions and performance characteris- tics, resulting in changes to steering, handling, and braking of your vehicle. This can cause unpredict- able handling and stress to steeri[...]

TIRE CHAINS Due to limited clearance, tire chains ar e not recom- mended. CAUTION! Damage to the vehicle may result if tire chains are used. SNOW TIRES There ar e no snow tires that are compatible with the wheels on this vehicle. TIRE ROT A TION RECOMMENDA TIONS T ires on the fr ont and rear axles of vehicles operate at differ ent loads and perform[...]

Rotate the tires “side-to-side” as shown in the diagram. TIRE PRESSURE MONITOR SYSTEM (TPMS) Low Tire Indicator If tire pr essure falls below 23 psi (159 kpa), the “Low T ire Pressur e T elltale” in the Message Center will illuminate, a chime will sound, and the words “LOW TIRE” will flash slowly in the Liquid Crystal Display (LCD) pane[...]

CAUTION! The T ire Pressure Monitor System (TPMS) has been optimized for the original equipment tires and wheels. The TPMS pressures have been established for the tire size equipped on your vehicle. Undesir- able operation or sensor damage may result when using replacement equipment that is not of the same size, type, and/or style. Aftermarket whee[...]

your vehicle to ensure that the r eplacement or alternate tires and wheels allow the TPMS to continue to function properly . FUEL REQUIREMENTS 8.4L Engine The 8.4L engine is designed to meet all emissions regulations and pr ovide excel- lent fuel economy and performance when using high-quality premium unleaded gasoline with an octane rating of 91 o[...]

The manufacturer supports the use of r eformulated gaso- lines. Properly blended r eformulated gasolines will pro- vide excellent performance and durability of engine and fuel system components. Gasoline/Oxygenate Blends Some fuel suppliers blend unleaded gasoline with oxy- genates such as 10% ethanol, MTBE, and ETBE. Oxygen- ates are r equired in [...]

T o fix a Non-FFV vehicle inadvertently fueled once with E-85 perform the following: • drain the fuel tank (see your authorized dealer) • change the engine oil and oil filter • disconnect and reconnect the battery to r eset the engine controller memory More extensive r epairs will be required for pr olonged exposure to E-85 fuel. MMT In Gasol[...]

Fuel System Cautions CAUTION! Follow these guidelines to maintain your vehicle’s performance: • The use of leaded gas is prohibited by Federal law . Using leaded gasoline can impair engine perfor- mance, or damage the emission control system. • An out-of-tune engine, or certain fuel or ignition malfunctions, can cause the catalytic converter [...]

Carbon Monoxide W arnings W ARNING! Carbon monoxide (CO) in exhaust gases is deadly . Follow the precautions below to prevent carbon monoxide poisoning: • Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas, which can kill. Never run the engine in a closed area, such as a garage, and never sit in a parked vehic[...]

NOTE: • When the fuel nozzle “clicks” or shuts off, the fuel tank is full. • The fuel tank filler tube has a restricting door about 2 inches (50 mm) inside the opening. If using a portable container to add fuel, it must have a flexible nozzle long enough to force open the r estricting door . CAUTION! • Damage to the fuel system or emissio[...]

NOTE: • T ighten the gas cap until you hear a “clicking” sound. This is an indication that the gas cap is tightened properly . The “Malfunction Indicator Light” in the instrument cluster may turn on if the gas cap is not secured pr operly . Make sur e that the gas cap is tight- ened each time the vehicle is refueled. • If the gas cap is[...]

[...]

WHA T T O DO IN EMERGENCIES CONTENTS 䡵 Hazard W arning Flasher ................ 1 9 0 䡵 If Y our Engine Overheats ................ 1 9 0 䡵 TIREFIT Kit ......................... 1 9 1 ▫ TIREFIT Storage ..................... 1 9 2 ▫ TIREFIT Kit Components And Operation . . . 192 ▫ TIREFIT Usage Precautions ............. 1 9 3 ▫ Sealing [...]

HAZARD W ARNING FLASHER The Hazard W arning flasher switch is on the top of the steering column, just behind the steering wheel. Press the switch to turn on the Hazar d W arning flasher . When the switch is activated, all directional turn signals will flash on and off to warn oncoming traf fic of an emergency . Press the switch a second time to tur[...]

• In city traffic — While stopped, put the transmission in NEUTRAL, but do not increase engine idle speed. • In city traffic — While moving, shift into the highest gear possible to reduce engine RPM. NOTE: There ar e steps that you can take to slow down an impending overheat condition: • If your air conditioner (A/C) is on, turn it off. T[...]

TIREFIT Storage The TIREFIT kit is located in the trunk. TIREFIT Kit Components and Operation 1. Sealant Bottle 2. Pressur e Gauge 3. Power Button 4. Mode Select Knob TIREFIT Location 192 WHA T TO DO IN EMERGENCIES[...]

5. Power Plug and Cable 6. Air Pump Hose (Black) 7. Sealant Hose (Clear with Y ellow Cap) 8. Accessory Storage Compartment Using the Mode Select Knob and Hoses Selecting Air Mode T urn the Mode Select knob (4) to this position for air pump operation only . Use the Black Air Pump Hose (6) when selecting this mode. Selecting Sealant Mode T urn the Mo[...]

the vehicle or tire and wheel components. Once the sealant dries, it can easily be peeled off and pr operly discarded. • For optimum performance, make sure the valve stem on the wheel is free of debris befor e connecting the TIREFIT kit. • Y ou can use the TIREFIT air pump to inflate bicycle tires. The kit also comes with two needles located in[...]

W ARNING! (Continued) − If you are unsure of the condition of the tire or the wheel. • Keep TIREFIT away from open flame or heat source. • A loose TIREFIT kit thrown forward in a collision or hard stop could endanger the occupants of the vehicle. Always stow the TIREFIT kit in the place provided. Failure to follow these warnings can result in[...]

Sealing a Tire with TIREFIT (A) Whenever Y ou Stop to Use TIREFIT : 1. Pull over to a safe location and turn ON the vehicle’s Hazard W arning flashers. 2. V erify that the valve stem (on the wheel with the deflated tire) is in a position that is near to the gr ound. This will allow the TIREFIT Hoses (6) and (7) to reach the valve stem and keep th[...]

(C) Injecting TIREFIT Sealant into the deflated tire: • Always start the engine before turning ON the TIRE- FIT kit. NOTE: Manual transmission vehicles must have the parking brake engaged and the shifter in NEUTRAL. • After pressing the Power Button (3), the sealant (white fluid) will flow from the Sealant Bottle (1) thr ough the Sealant Hose ([...]

If the sealant (white fluid) does flow through the clear Sealant Hose (7): 1. Continue to operate pump until sealant is no longer flowing through hose (typically takes 30 - 70 seconds). As the sealant flows through hose (7), the pr essure gauge (2) can read as high as 70 psi (5 Bar). The pr essure gauge (2) will decrease quickly fr om approximately[...]

CAUTION! • The metal end fitting from Power Plug and Cable (5) may get hot after use, so should be handled carefully . • Failure to reinstall the Y ellow Cap on the fitting at the end of the Clear Sealant Hose (7) can result in sealant contacting your skin, clothing, and the vehicle’ s interior . It can also result in sealant contacting inter[...]

If tire pressure is less than 19 psi (1.3 Bar) , the tire is too badly damaged. Do not attempt to drive the vehicle further . Call for assistance. If the tire pressure is 19 psi (1.3 bar) or higher: 1. Press the power button (3) to on and inflate the tir e to the pressur e indicated on the tire and loading informa- tion label on the driver-side doo[...]

4. Clean any remaining sealant fr om the TIREFIT hous- ing. 5. Position the new Sealant Bottle (1) to the housing so that the Clear Sealant Hose (7) aligns with the hose slot in the front of the housing and the alignment keys on the bottom of the bottle align with the alignment slots in the housing. Then, press the bottle into the housing. An audib[...]

W ARNING! (Continued) • Battery fluid is a corrosive acid solution; do not allow battery fluid to contact eyes, skin, or cloth- ing. Do not lean over a battery when attaching clamps or allow the clamps to touch each other . If acid splashes in eyes or on skin, flush contami- nated area immediately with large quantities of water . • A battery ge[...]

6. If you are jump-starting your vehicle, connect one end of a jumper cable to the positive (+) terminal on the booster battery . Connect the other end of the same cable to the remote jump-start positive post (+) . 7. If you are jump-starting another vehicle, connect one end of a jumper cable to the remote jump-start positive post (+) . Connect the[...]

W ARNING! • Y ou should not try to start your vehicle by pushing or towing. • Do not connect the cable to the negative post of the discharge battery . The resulting electrical spark could cause the battery to explode. • During cold weather when temperatures are be- low freezing point, electrolyte in a discharged battery may freeze. Do not att[...]

FREEING A STUCK VEHICLE If your vehicle becomes stuck in mud, sand, or snow , it can often be moved by a rocking motion. T urn your steering wheel right and left to clear the area ar ound the front wheels. Then shift back and forth between RE- VERSE and FIRST gear . Using the least accelerator pedal pressur e to maintain the rocking motion without [...]

TOWING A DISABLED VEHICLE Do not tow with sling-type equipment. Only use flatbed equipment. Always comply with applicable state or local towing ordinances. CAUTION! T owing with equipment other than flatbed types may damage your vehicle. 206 WHA T TO DO IN EMERGENCIES[...]

MAINT AINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment — 8.4L ............. 2 0 9 䡵 Onboard Diagnostic System (OBD II) ....... 2 1 0 䡵 Emissions Inspection And Maintenance Programs ............................ 2 1 1 䡵 Replacement Parts ..................... 2 1 2 䡵 Dealer Service ........................ 2 1 2 䡵 Maintenance Procedur [...]

▫ Hydraulic Clutch .................... 2 3 7 ▫ Rear Axle .......................... 2 3 8 ▫ Appearance Care And Protection Fr om Corrosion .......................... 2 3 8 ▫ Aero Gr oup — If Equipped ............. 2 4 2 䡵 Fuses .............................. 2 4 5 ▫ Power Distribution Center .............. 2 4 5 ▫ Mini-Power Distri[...]

ENGINE COMP ARTMENT — 8.4L 1 — Coolant Pressur e Cap 6 — Clutch Fluid Reservoir 2 — Engine Oil Dipstick 7 — Power Steering Fluid Reservoir 3 — Power Distribution Center 8 — Engine Oil Fill 4 — Remote Jump Start Positive Battery Post 9 — Air Cleaner Filter 5 — Brake Fluid Reservoir 10 — W asher Fluid Reservoir 7 MAINT AINING YO[...]

ONBOARD DIAGNOSTIC SYSTEM (OBD II) T o meet new government r egulations and promote cleaner air , your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions and engine control systems. When these systems ar e operating prop- erly , your vehicle will provide excellent [...]

EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS In some localities, it may be a legal requir ement to pass an inspection of your vehicle’s emissions control system. Failure to pass could pr event vehicle registration. For states that requir e an Inspection and Mainte- nance (I/M), this check verifies the “Malfunction Indicator Light (MIL)” is f[...]

4. Approximately 15 seconds later , one of two things will happen: a. The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn OFF the ignition or start the engine. This means that your vehicle’s OBD II system is not ready and you should not proceed to the I/M station. b. The MIL will not flash at all and [...]

your vehicle. Refer to these manuals before attempting any procedur e yourself. NOTE: Intentional tampering with emissions control systems may void your warranty and could result in civil penalties being assessed against you. W ARNING! Y ou can be badly injured working on or around a motor vehicle. Only do service work for which you have the knowle[...]

CAUTION! (Continued) • Y our vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance intervals. Do not use chemical flushes in these components as the chemicals can damage your engine, transmission, power steering or air condi- tioning. Such damage is not covered [...]

• Extensive engine idling • Driving in dusty conditions • Short trip driving of less than 10 miles (16.2 km) • More than 50% of your driving is at sustained high speeds during hot weather , above 90°F (32°C) NOTE: If ANY of these apply to you, then change your engine oil every 3,000 miles (5 000 km) or three months, whichever comes first,[...]

The engine oil filler cap also shows the recommended engine oil viscosity for your engine. For information on engine oil filler cap location, refer to “Engine Compart- ment” in “Maintaining Y our V ehicle” for further information. Synthetic Engine Oils Y ou may use synthetic engine oils pr ovided the recom- mended oil quality requir ements [...]

Engine Air Cleaner Filter For normal driving conditions, inspect and replace the engine air cleaner filter at the intervals shown on “Main- tenance Schedule A.” For vehicles driven frequently in dusty or under severe conditions, inspect and r eplace the engine air cleaner filter at the intervals shown on “Main- tenance Schedule B.” Refer to[...]

Maintenance-Free Battery The top of the maintenance-free battery is permanently sealed. Y ou will never have to add water , nor is periodic maintenance requir ed. The battery is located underneath an access panel inside the rear compartment on the left side of the vehicle. A remote battery terminal is located in the engine compart- ment for jump-st[...]

W ARNING! • Battery fluid is a corrosive acid solution and can burn or even blind you. Do not allow battery fluid to contact your eyes, skin, or clothing. Do not lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area imme- diately with large amounts of water . • Battery gas is flammable and explosive. Kee[...]

CAUTION! • It is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative post. Battery posts are marked posi- tive (+) and negative (-) and are identified on the battery case. Cable clamps should be tight on the terminal posts and free of corros[...]

T o Activate the Battery Save Feature 1. Insert the key into the ignition switch. 2. Cycle the ignition switch from OFF/LOCK to ACC four times. Leave the switch in the OFF/LOCK position after the fourth cycle. 3. Push the driver’s power door lock switch in the up direction. A single chime will sound and the horn will chirp to indicate that the pr[...]

2. Insert the key into the ignition switch. 3. T urn the ignition switch to the ON/RUN position. The Battery Save Feature will turn of f. NOTE: If the ignition switch is NOT turned to ON/ RUN position, the Battery Save Feature will be enabled 45 seconds after the driver’s door is closed. Air Conditioner Maintenance For best possible performance, [...]

W ARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air condi- tioning system. Some unapproved refrigerants are flammable and can explode, injuring you. Other unapproved refrigerants or lubricants can cause the system to fail, requiring costly repairs. Refer to Section 3 of the W arranty Information B[...]

concerned should be wiped clean to remove dust and grit; after lubricating excess oil and grease should be removed. Particular attention should also be given to hood latching components to insure pr oper function. When performing other underhood services, the hood latch, release mechanism and safety catch should be cleaned and lubricated. The exter[...]

reservoir at r egular intervals. Fill the reservoir with windshield washer solvent (not engine coolant (anti- freeze) and operate the system for a few seconds to flush out the residual water . W ARNING! Commercially available windshield washer solvents are flammable. They could ignite and burn you. Care must be exercised when filling or working aro[...]

CAUTION! The catalytic converter requires the use of unleaded fuel only . Leaded gasoline will destroy the ef fective- ness of the catalyst as an emissions control device and may seriously reduce engine performance and cause serious damage to the engine. Under normal operating conditions, the catalytic con- verter will not requir e maintenance. How[...]

W ARNING! A hot exhaust system can start a fire if you park over materials that can burn. Such materials might be grass or leaves coming in contact with your exhaust system. Do not park or operate your vehicle in areas where your exhaust system can contact anything that can burn. In unusual situations involving grossly malfunctioning engine operati[...]

Cooling System W ARNING! • When working near the radiator cooling fans, disconnect each fan motor lead or turn the ignition switch to the OFF position. The fans are tempera- ture controlled and can start any time the ignition switch is in the ON position. • Y ou or others could be badly burned by hot engine coolant (antifreeze) or steam from yo[...]

Cooling System – Drain, Flush, and Refill If the engine coolant (antifreeze) is dirty or contains a considerable amount of sediment, clean and flush with a reliable cooling system cleaner . Follow with a thor ough rinsing to remove all deposits and chemicals. Pr operly dispose of the old engine coolant (antifreeze). Refer to “Maintenance Schedu[...]

CAUTION! (Continued) • This vehicle has not been designed for use with Propylene Glycol based engine coolant (anti- freeze). Use of Propylene Glycol based engine coolant (antifreeze) is not recommended. Adding Coolant Y our vehicle has been built with an impr oved engine coolant (antifreeze) that allows extended maintenance intervals. This engine[...]

Please note that it is the owner’s responsibility to main- tain the proper level of pr otection against freezing ac- cording to the temperatur es occurring in the area where the vehicle is operated. NOTE: Mixing engine coolant (antifreeze) types will decrease the life of the engine coolant (antifr eeze) and will requir e more frequent engine cool[...]

Disposal of Used Coolant Used ethylene glycol based engine coolant (antifreeze) is a regulated substance r equiring proper disposal. Check with your local authorities to determine the disposal rules for your community . T o prevent ingestion by ani- mals or children, do not stor e ethylene glycol based engine coolant (antifreeze) in open containers[...]

If an examination of your engine compartment shows no evidence of radiator or hose leaks, the vehicle may be safely driven. The vapor will soon dissipate. • Do not overfill the coolant recovery bottle. • Check engine coolant (antifreeze) fr eeze point in the coolant bottle. If engine coolant (antifreeze) needs to be added, contents of the coola[...]

W ARNING! Riding the brakes can lead to brake failure and possibly an accident. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear , and possible brake damage. Y ou would not have your full braking capacity in an emergency . Master Cylinder – Brake Fluid Level Check [...]

W ARNING! • Use only manufacturer’s recommended brake fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Y our V ehicle” for further information. Using the wrong type of brake fluid can severely damage your brake system and/or impair its performance. The proper type of brake fluid for your vehicle is also labeled on[...]

W ARNING! (Continued) • Do not allow petroleum based fluid to contami- nate the brake fluid. Brake seal components could be damaged, causing partial or complete brake failure. This could result in an accident. Change Brake Fluid Brake fluid will tend to absorb moisture fr om the atmo- sphere over time. If the fluid becomes contaminated with water[...]

Hydraulic Clutch Master Cylinder – Clutch Fluid Level Check Check the fluid in the clutch master cylinder when performing underhood services. Clean the top of the master cylinder area befor e removing the cap. If necessary , add fluid to the reservoir . Do not overfill. Overfilling can cause clutch release problems as the clutch wears. A low flui[...]

Change Clutch Fluid Clutch fluid will tend to absorb moisture fr om the atmosphere over time. If the fluid becomes contaminated with water , clutch performance will deteriorate. There- fore, the clutch fluid must be changed at the intervals specified in “Maintenance Schedule.” Refer to “Mainte- nance Schedule” for further information. See y[...]

The following maintenance recommendations will enable you to obtain maximum benefit from the corr osion resistance built into your vehicle. W ashing • W ash your vehicle r egularly . Always wash your ve- hicle in the shade using MOP AR 威 Car W ash or equiva- lent, or a mild car wash soap, and rinse the panels completely with clear water . • I[...]

Convertible T op Care – Convertible Models Only Use a mild detergent to clean the top. A void heavy scrubbing and rinse with plenty of clean water . Allow to dry thoroughly befor e storage. Stain Repel Fabric Cleaning Procedure – If Equipped Stain Repel seats may be cleaned in the following man- ner: • Remove as much of the stain as possible [...]

Leather or V inyl Seat/T rim Care and Cleaning Leather is best preserved by r egular cleaning with a damp soft cloth. Small particles of dirt can act as an abrasive and damage the leather surface and should be removed immediately with a damp cloth. Stubborn soils can be removed easily with a soft cloth and MOP AR 威 T otal Clean or equivalent. Car[...]

If the belts need cleaning, use MOP AR 威 T otal Clean or equivalent, a mild soap solution, or lukewarm water . Do not remove the belts fr om the vehicle to wash them. Replace the belts if they appear frayed or worn or if the buckles do not work properly . Dry with a soft tissue. Aero Group — If Equipped Please review all of the pr ecautionary n[...]

CAUTION! Use care when approaching parking blocks, tall speed bumps and garage curbs. These surfaces can damage your splitter . Use caution when driving up to sloped surfaces or over speed bumps. Approaching a speed bump or a slope at a slight angle may improve your clearance. CAUTION! • Hard contact with steep ramps may cause damage to your spli[...]

2. Rear Wing Do not operate the vehicle with the rear wing r emoved. The aerodynamic balance of this set up is unstable and can cause a loss of control. W ARNING! Use extra caution when closing the rear deck lid on the AR Y convertible. Due to the added weight of the rear wing the deck lid will close at a higher rate of speed and can cause injury .[...]

The rear wing is molded with unidir ectional carbon fiber and painted in body color . Some patterned or linear conditions may be visible in the painted carbon fiber surfaces. This is also a normal result of the carbon fiber process. FUSES Power Distribution Center The Power Distribution Center is located in the engine compartment on the driver’s [...]

Cavity Car- tridge Fuse Mini- Fuse Description 1 40 Amp Green — Blower Motor 2 40 Amp Green — Anti-Lock Brakes (ABS) Pump Feed/Starter 3 30 Amp Pink — Body Control Module (BCM) – Battery Feed 4 20 Amp Blue — Amplifier 5 30 Amp Pink — Ignition Switch Run/ Accessory Feed – W in- dows 6 40 Amp Green — Body Control Module (BCM) – Batt[...]

Cavity Car- tridge Fuse Mini- Fuse Description 16, 17 — 20 Amp Y ellow Power Outlet 18 — 15 Amp Blue Ignition Off Draw (IOD) 19 — 15 Amp Blue Horn 20 — 15 Amp Blue Air Conditioning (A/C) Clutch Relay 21 — 15 Amp Blue Stop Light Switch 22 — 25 Amp Clear Fuel Pump/Powertrain Control Module (PCM) 23, 24 — 10 Amp Red Airbag 60, 61 — 15 [...]

CAUTION! • When installing the Power Distribution Center cover , it is important to ensure the cover is prop- erly positioned and fully latched. Failure to do so may allow water to get into the Power Distribution Center , and possibly result in an electrical system failure. • When replacing a blown fuse, it is important to use only a fuse havin[...]

CAUTION! • When installing the Mini-Power Distribution Center cover , it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the Power Distribution Center , and possibly result in an electrical system failure. • When replacing a blown fuse, it is important to use only a fuse ha[...]

• Block the wheels. Do not apply the parking brake. • Cut blocks of plywood about the same size of the tires. Cover each block with indoor/outdoor carpeting and place them between the tires and concr ete. This will prevent tir e flat spotting. • For long-term storage, remove the tir es and put the vehicle up on blocks. Stack the tires on plyw[...]

Check the battery every four to six weeks to ensure that the voltage is above 12.40 V olts. The voltage will drop more rapidly in hot temperatur es. If battery voltage drops below 12.40 V olts, follow the battery rechar ge procedur e in the Service Manual. NOTE: T o help pr event the battery from discharging during shorter periods of inactivity , p[...]

LIGHT BULBS – Exterior (Convertible Models) Bulb Number Low/High Beam High Intensity Discharge (HID) Headlamp ......... S e r viced at authorized dealer only Auxiliary High Beam Headlamp ..... (HB3A) 9005XS Front Park/T urn Signal Lamp ............. 3157AK Fog Lamp ....................... (H10 U) 9145 Front Side Marker Lamp .................. 288[...]

BULB REPLACEMENT Auxiliary High Beam Headlamp, Front Park/T urn Signal Lamp, Front Side Marker Lamp 1. Remove the push pin from the upper outer corner of the splash shield and remove the splash shield. 2. T urn the appropriate bulb and socket assembly coun- terclockwise, and then pull it out of the headlamp assembly . 1 — Front Side Marker Lamp 2[...]

3. Pull the bulb out of the socket assembly . 4. Push the replacement bulb into the socket assembly . 5. Reinstall the bulb and socket assembly into the head- lamp assembly , and then turn it clockwise. 6. Install the splash shield and push pin. High Intensity Discharge Headlamps (HID) The headlamps are a type of high voltage dischar ge tube. High [...]

Front Fog Lamp 1. Remove the push pin from the upper outer corner of the splash shield and remove the splash shield. 2. T urn the bulb and socket assembly counterclockwise, and then pull it out of the front fog lamp assembly . 3. Pull the bulb out of the socket assembly . 4. Push the replacement bulb into the socket assembly . 5. Reinstall the bulb[...]

T aillamp, T ail/Stop Lamp, Rear Marker Lamp 1. Open the trunk 2. Remove the two fasteners and then remove the access panel. 3. T urn the appropriate bulb and socket assembly coun- terclockwise, and then pull it out of the upper lamp assembly . 4. Pull the bulb out of the socket assembly . 1 — Rear Marker Lamp 2 — T ail/Stop Lamp 3 — T aillam[...]

5. Push the replacement bulb into the socket assembly . 6. Reinstall the bulb and socket assembly into the upper lamp assembly , and then turn it clockwise. 7. Install the access panel and the two fasteners. 8. Close the trunk. T aillamp, T ail/Stop Lamp, Rear Marker Lamp (Coupe Models) For bulb replacement, see your authorized dealer . Backup Lamp[...]

3. Remove the three upper lamp assembly r etaining nuts. 4. Remove the three bulb and socket assemblies fr om the upper lamp assembly by turning them counterclockwise and then pulling them out of the upper lamp assembly . 258 MAINT AINING YOUR VEHICLE[...]

5. Remove the upper lamp assembly . 6. T urn the appropriate bulb and socket assembly coun- terclockwise, and then pull it out of the lower lamp assembly . 1 — Backup Lamp 7 MAINT AINING YOUR VEHICLE 259[...]

7. Pull the bulb out of the socket assembly . 8. Push the replacement bulb into the socket assembly . 9. Reinstall the bulb and socket assembly into the lower lamp assembly , and then turn it clockwise. 10. Reinstall the three bulb and socket assemblies into the upper lamp assembly , and turn them clockwise. 1 1. Reinstall the upper lamp assembly a[...]

License Lamp 1. Open the trunk. 2. T urn the bulb and socket assembly counterclockwise, and then pull it out of the housing. 3. Pull the bulb out of the socket assembly . 4. Push the replacement bulb into the socket assembly . 5. Reinstall the bulb and socket assembly into the hous- ing, and then turn it clockwise. 6. Close the trunk. 7 MAINT AININ[...]

FLUID CAP ACITIES U.S. Metric Fuel (Approximate) 16 Gallons 60.6 Liters Engine Oil with Filter 8.4 Liter Engine (SAE 5W -40, API Certified) 1 1 Quarts 10.4 Liters Cooling System * 8.4 Liter Engine (MOP AR 威 Engine Coolant/Antifr eeze 5 Y ear/100,000 Mile Formula or equivalent) 16 Quarts 15 Liters * Includes heater and coolant recovery bottle fill[...]

FLUIDS, LUBRICANTS, AND GENUINE P ARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant MOP AR 威 Antifr eeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hy- brid Organic Additive T echnology) or equivalent. Engine Oil For best performance and maximum protection under all types of operat- ing conditions, the manufacturer only r ec[...]

Chassis Component Fluid, Lubricant, or Genuine Part T ransmission MOP AR 威 A TF+4 威 Automatic T ransmission Fluid or equivalent licensed A TF+4 威 product. Rear Axle MOP AR 威 Synthetic Gear and Axle Lubricant SAE 75W -140 or equivalent, with Limited Slip Additive Friction Modifier . Brake Master Cylinder MOP AR 威 Brake and Clutch Fluid DOT[...]

MAINTENANCE SCHEDULES CONTENTS 䡵 Emissions Control System Maintenance ...... 2 6 6 䡵 Maintenance Schedules ................. 2 6 6 ▫ Maintenance Schedule B ............... 2 6 9 ▫ Maintenance Schedule A ............... 2 8 0 8 M A I N T E N A N C E S C H E D U L E S[...]

EMISSIONS CONTROL SYSTEM MAINTENANCE The Scheduled Maintenance services listed in bold type must be done at the times or mileages specified to ensure the continued proper functioning of the emissions contr ol system. These and all other maintenance services in- cluded in this manual, should be done to provide best vehicle performance and reliabilit[...]

NOTE: • If ANY of these apply to you then change your engine oil every 3,000 miles (5000 km) or three months, whichever comes first, and follow the maintenance recommendations in “Maintenance Schedule B” in this section. • If ANY of these apply to you, then flush and replace the engine coolant every 102,000 miles (170 000 km) or 60 months, [...]

At Each Stop for Fuel • Check the engine oil level about five minutes after a fully warmed engine is shut off. Checking the oil level while the vehicle is on level ground will impr ove the accuracy of the oil level reading. Add oil only when the level is at or below the ADD or MIN mark. • Check the windshield washer solvent and add if requir ed[...]

MAINTENANCE SCHEDULE B Follow “Maintenance Schedule B” if you usually operate your vehicle under one or more of the following condi- tions. • Day or night temperatures ar e below 32°F (0°C). • Stop and go driving. • Extensive engine idling. • Driving in dusty conditions. • Short trips of less than 10 miles (16 km). • More than 50%[...]

Miles 3,000 6,000 9,000 12,000 15,000 18,000 (Kilometers) (5 000) (10 000) (15 000) (20 000) (25 000) (30 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Rotate the tires. 〫〫 XX X Inspect and replace the air cleaner filter , if necessary . X Inspect the transmission fluid. X Inspect the brake linings. X Chang[...]

Miles 21,000 24,000 27,000 30,000 33,000 36,000 (Kilometers) (35 000) (40 000) (45 000) (50 000) (55 000) (60 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Rotate the tires. 〫〫 XX X Inspect and replace the air cleaner filter , if necessary . X Inspect and replace the PCV valve, if neces- sary . X Change the[...]

Miles 39,000 42,000 45,000 48,000 51,000 54,000 (Kilometers) (65 000) (70 000) (75 000) (80 000) (85 000) (90 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Rotate the tires. 〫〫 XX X Inspect and replace the engine air cleaner fil- ter , if necessary . X Inspect and replace the auto tension drive belt, if nec[...]

Miles 57,000 60,000 63,000 66,000 69,000 72,000 (Kilometers) (95 000) (100 000) (105 000) (1 10 000) (1 15 000) (120 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Rotate the tires. 〫〫 XX X Inspect and replace the air cleaner filter , if necessary . X Inspect and replace the PCV valve, if neces- sary . X Flu[...]

Miles 57,000 60,000 63,000 66,000 69,000 72,000 (Kilometers) (95 000) (100 000) (105 000) (1 10 000) (1 15 000) (120 000) Change the rear axle fluid. X X Change the brake fluid. X Change the brake and clutch fluid. X Lubricate the front and r ear suspension ball joints. X 8 M A I N T E N A N C E S C H E D U L E S 274 MAINTENANCE SCHEDULES[...]

Miles 75,000 78,000 81,000 84,000 87,000 90,000 (Kilometers) (125 000) (130 000) (135 000) (140 000) (145 000) (150 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Rotate the tires. 〫〫 XX X Inspect and replace the air cleaner filter , if necessary . XX Inspect and replace the PCV valve, if neces- sary . X Ins[...]

Miles 93,000 96,000 99,000 102,000 105,000 108,000 (Kilometers) (155 000) (160 000) (165 000) (170 000) (175 000) (180 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXXX Rotate the tires. 〫〫 XXX Inspect and replace the engine air cleaner fil- ter , if necessary . X Replace the spark plugs. X Replace the ignition [...]

Miles 93,000 96,000 99,000 102,000 105,000 108,000 (Kilometers) (155 000) (160 000) (165 000) (170 000) (175 000) (180 000) Inspect the transmission fluid. X Inspect the brake linings. X X Change the rear axle fluid. X X Change the brake and clutch fluid. X Change the brake fluid. X Lubricate the front and r ear suspension ball joints. X 8 M A I N [...]

Miles 1 11,000 114,000 1 17,000 120,000 (Kilometers) (185 000) (190 000) (195 000) (200 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXX Rotate the tires. 〫〫 XX Inspect and replace the engine air cleaner filter , if necessary . X Inspect and replace the PCV valve, if necessary . X Flush and replace the engine coo[...]

‡ This maintenance is not requir ed if previously replaced. 〫〫 Although not requir ed, the manufacturer recom- mends repr ogramming TPMS after rotating tires so sys- tem can relearn tir e pressure sensor location. Refer to “T ire Pr essure Monitor System (TPMS)” in “Starting and Operating” for further information. Inspection and servi[...]

MAINTENANCE SCHEDULE A Miles 6,000 12,000 18,000 24,000 30,000 (Kilometers) (10 000) (20 000) (30 000) (40 000) (50 000) [Months] [6] [12] [18] [24] [30] Change engine oil and engine oil filter . X X X X X Rotate the tires. 〫〫 X XXXX Inspect and replace the engine air cleaner filter , if necessary . X Inspect the transmission fluid. X X Inspect[...]

Miles 36,000 42,000 48,000 54,000 60,000 (Kilometers) (60 000) (70 000) (80 000) (90 000) (100 000) [Months] [36] [42] [48] [54] [60] Change engine oil and engine oil filter . X X X X X Rotate the tires. 〫〫 X XXXX Inspect and replace the engine air cleaner filter , if necessary . X Inspect and replace the PCV valve, if necessary . X Flush and r[...]

Miles 66,000 72,000 78,000 84,000 90,000 (Kilometers) (1 10 000) (120 000) (130 000) (140 000) (150 000) [Months] [66] [72] [78] [84] [90] Change engine oil and engine oil filter . X X X X X Rotate the tires. 〫〫 X XXX X Inspect and replace the engine air cleaner filter , if nec- essary . X Inspect and replace the PCV valve, if necessary . X Ins[...]

Miles 96,000 102,000 108,000 1 14,000 120,000 (Kilometers) (160 000) (170 000) (180 000) (190 000) (200 000) [Months] [96] [102] [108] [114] [120] Change engine oil and engine oil filter . X X X X X Rotate the tires. 〫〫 XX X X X Inspect and replace the engine air cleaner filter , if necessary . X Inspect and replace the PCV valve, if necessary [...]

Miles 96,000 102,000 108,000 1 14,000 120,000 (Kilometers) (160 000) (170 000) (180 000) (190 000) (200 000) [Months] [96] [102] [108] [114] [120] Inspect the brake linings. X Change the rear axle fluid. X Change the brake and clutch fluid. X Lubricate the front and r ear suspension ball joints. X ‡ This maintenance is not requir ed if previously[...]

W ARNING! • Y ou can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic. • Failure to properly inspect and maintain your vehicle could result in a compone[...]

[...]

IF YOU NEED CONSUMER ASSIST ANCE CONTENTS 䡵 Suggestions For Obtaining Service For Y our V ehicle .............................. 2 8 9 ▫ Prepar e For The Appointment ........... 2 8 9 ▫ Prepar e A List ...................... 2 8 9 ▫ Be Reasonable W ith Requests ............ 2 8 9 䡵 If Y ou Need Assistance ................. 2 8 9 ▫ Chrysl[...]

䡵 Publication Order Forms ................ 2 9 3 䡵 Department Of T ransportation Uniform T ire Quality Grades ........................ 2 9 5 ▫ T r eadwear ......................... 2 9 5 ▫ T raction Grades ..................... 2 9 5 ▫ T emperatur e Grades .................. 2 9 6 288 IF YOU NEED CONSUMER ASSIST ANCE[...]

SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty . Discuss additional charges with the service manager . Keep a maintenance log of your vehicle’s[...]

This is why you should always talk to an authorized dealer’s service manager first. Most matters can be re- solved with this process. • If for some reason you ar e still not satisfied, talk to the general manager or owner of the authorized dealer- ship. They want to know if you need assistance. • If an authorized dealership is unable to resol[...]

Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) T o assist customers who have hearing dif ficulties, the manufacturer has installed special TDD (T elecommuni- cation Devices for the Deaf) equipment at its customer center . Any hearing or speech impaired customer , who has access to a TDD or a conventional teletypewriter (TTY) in th[...]

W e appr eciate that you have made a major investment when you purchased the vehicle. An authorized dealer has also made a major investment in facilities, tools, and training to assure that you ar e absolutely delighted with the ownership experience. Y ou’ll be pleased with their sincere ef forts to resolve any warranty issues or related concerns[...]

If NHTSA r eceives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may or der a recall and remedy campaign. However , NHTSA cannot become involved in individual problems between you, your authorized dealer , and the manufacturer . T o contact NHTSA, you may either call the Aut[...]

vehicle, system, and/or components is written in straightforward language with illustrations, diagrams, and charts. • Diagnostic Procedure Manuals Diagnostic Procedur e Manuals are filled with dia- grams, charts and detailed illustrations. These practi- cal manuals make it easy for students and technicians to find and fix problems on computer -co[...]

DEP ARTMENT OF TRANSPORT A TION UNIFORM TIRE QUALITY GRADES The following tire grading categories wer e established by the National Highway T raf fic Safety Administration. The specific grade rating assigned by the tire’s manufactur er in each category is shown on the sidewall of the tires on your vehicle. All passenger car tires must conform to [...]

T emperature Grades The temperature grades ar e A (the highest), B, and C, repr esenting the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and r educe tir[...]

INDEX 10[...]

About Y our Brakes ....................... 1 5 7 ABS (Anti-Lock Brake System) ............ 1 10,158 Accessory Delay , Power .................. 13,28 Adding Engine Coolant (Antifreeze) .......... 2 3 0 Adding Fuel ........................... 1 8 5 Adding W asher Fluid ..................... 2 2 4 Adjustable Pedals ........................ 9 8 Air Cle[...]

Jump Starting ......................... 2 0 1 Keyless T ransmitter Replacement (RKE) ....... 2 3 Location .......................... 202,218 Saving Feature (Pr otection) ............... 2 2 0 Storing V ehicle ........................ 2 2 0 Belts, Seat .......................... 33,35,66 Body Mechanism Lubrication ............... 2 2 3 Boot, Convert[...]

Child Restraint T ether Anchors ............... 6 0 Circuit Br eakers ......................... 2 4 5 Clean Air Gasoline ....................... 1 8 1 Climate Control ......................... 1 3 4 Clock ................................ 1 1 8 Clutch Fluid ........................... 2 3 7 Compact Disc (CD) Maintenance ............. 1 3 3 Console .[...]

Disposal Antifreeze (Engine Coolant) ............... 2 3 2 Door Locks ............................. 2 5 Door Locks, Automatic .................... 2 7 Doors ................................. 2 5 Driving On Slippery Surfaces ................... 1 5 1 Through Flowing, Rising, or Shallow Standing W ater ........................ 1 5 2 Electric Remote M[...]

Engine Oil V iscosity ................... 215,262 Engine Oil V iscosity Chart ................. 2 1 5 Ethanol ............................... 1 8 2 Exhaust Gas Caution .............. 31,65,185,225 Exhaust System ....................... 65,225 Express Down W indows ................... 2 2 Exterior Finish Care ...................... 2 3 9 Exterior Li[...]

Ethanol ............................. 1 8 2 Filler Cap (Gas Cap) .................... 1 8 5 Gasoline ............................ 1 8 1 Gauge .............................. 1 1 8 Methanol ............................ 1 8 2 Octane Rating ...................... 181,263 Requirements ...................... 181,262 T ank Capacity .......................[...]

Heater ............................... 1 3 4 High Beam Indicator ..................... 1 0 9 High Beam/Low Beam Select (Dimmer) Switch . . . 92 Hood Release ........................... 8 7 Hydraulic Clutch Fluid .................... 2 3 7 Ignition ............................... 1 2 K e y ................................ 1 2 Ignition Key Removal ..[...]

Lights ............................... 66,88 Airbag ........................ 50,56,66,1 12 Anti-Lock ......................... 1 10,161 Anti-Lock W arning ..................... 1 1 0 Battery Saver ........................ 90,93 Brake W arning ........................ 1 1 2 Bulb Replacement ...................... 2 5 1 Courtesy/Reading .............[...]

Loading V ehicle T i r e s ............................... 1 6 7 Locks ................................. 2 5 Door ................................ 2 5 Power Door ........................... 2 7 Low T ire Indicator ....................... 1 7 9 Low T ire Pr essure System .................. 1 7 9 Lubrication, Body ....................... 2 2 3 Mainte[...]

T r i p ................................ 1 0 8 Oil, Engine ....................... 214,262,263 Capacity ............................ 2 6 2 Change Interval ....................... 2 1 4 Checking ............................ 2 1 4 Dipstick ............................. 2 1 4 Disposal ............................ 2 1 6 Filter .........................[...]

W indows ............................. 2 8 W indows, Express Down ................. 2 2 Pregnant W omen and Seat Belts .............. 4 3 Pretensioners Seat Belts ............................ 4 2 Programming T ransmitters (Remote Keyless Entry) .................... 2 2 Radial Ply T ires ......................... 1 7 4 Radiator Cap (Coolant Pressur [...]

Safety Defects, Reporting .................. 2 9 2 Safety , Exhaust Gas ..................... 31,65 Safety Information, T ire ................... 1 6 1 Safety T ips ............................. 6 4 Satellite Radio Antenna ................... 1 3 2 Satellite Radio (Uconnect 威 studios) ........... 1 2 9 Schedule, Maintenance .................... 2[...]

Snow T ires ............................ 1 7 8 Speedometer ........................... 1 0 8 Starting ............................... 1 4 4 Emergency (Jump Starting) ............... 2 0 1 Engine Fails to Start .................... 1 4 6 Starting and Operating .................... 1 4 4 Starting Procedur es ...................... 1 4 4 Steering Powe[...]

Replacement ......................... 1 7 6 Rotation ............................ 1 7 8 Safety ........................... 161,171 Sizes ............................... 1 6 3 Snow T ires ........................... 1 7 8 Spinning ............................ 1 7 4 Storage ............................. 1 7 7 T r ead W ear Indicators ................[...]

V ehicle Theft Alarm (Security Alarm) .......... 1 3 V inyl T rim ............................. 2 4 1 V iscosity , Engine Oil ................... 215,262 V oltmeter ............................. 1 1 8 W arning Flasher , Hazard .................. 1 9 0 W arnings and Cautions ..................... 6 W arranty Information ..................... 2 9 2 W[...]

INST ALLA TION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this vehicle’s electronic system to pr ovide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained person- nel. The following must be observed during installation. The positive power[...]

Viper Chrysler Group LLC OWNER’S MANUAL 2010 2010 Viper 10ZB27-126-AA First Edition Printed in U.S.A.[...]