Dodge Durango (2008) manuale d’uso

T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION .............................................................3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE ............................... 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ............................... 7 9 4 INSTRUMENT P ANEL AND CONTROLS .........................................[...]

I n f o r m a t i o n P r o v i d e d b y :[...]

INTRODUCTION CONTENTS m Introduction ........................... 4 m Rollover W arning ........................ 4 m How T o Use This Manual .................. 5 m W arnings And Cautions ................... 7 m V ehicle Identification Number ............... 7 m V ehicle Modifications/Alterations ............ 8 1 I n f o r m a t i o n P r o v i d e d[...]

INTRODUCTION This manual has been prepar ed with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your new vehicle. It is supplemented by a W arranty Information Booklet and various customer oriented documents. Y ou are urged to read these publications car efully . Following the instruc- ti[...]

Failure to use driver and passenger seat belts pr ovided is a major cause of severe or fatal injury . In fact, the U.S. government notes that the universal use of existing seat belts could cut the highway death toll by 10,000 or more each year , and could reduce disabling injuries by 2 million annually . In a r ollover crash, an unbelted person is [...]

6 INTRODUCTION I n f o r m a t i o n P r o v i d e d b y :[...]

W ARNINGS AND CAUTIONS This manual contains W ARNINGS against operating procedur es, which could result in an accident or bodily injury . It also contains CAUTIONS against pr ocedures, which could result in damage to your vehicle. If you do not read this entire manual, you may miss important information. Observe all W arnings and Cautions. VEHICLE [...]

VEHICLE MODIFICA TIONS/AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death. 8 INTRODUCTION I n f o r m a t i o n P r o v i d e d b y :[...]

THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS m A W ord About Y our Keys .................. 1 2 ▫ Ignition Key Removal ................... 1 2 ▫ Locking Doors W ith The Key .............. 1 3 m Sentry Key ............................ 1 3 ▫ Replacement Keys ...................... 1 5 ▫ Customer Key Programming .............. 1 5 ▫[...]

▫ General Information .................... 2 4 ▫ Programming Additional T ransmitters ........ 2 5 ▫ Battery Replacement .................... 2 6 m Remote Starting System — If Equipped ........ 2 7 m Door Locks ............................ 2 8 ▫ Manual Door Locks ..................... 2 8 ▫ Power Door Locks ..................... 2 9 ▫[...]

▫ Seat Belts And Pregnant W omen ............ 5 2 ▫ Seat Belt Extender ...................... 5 2 ▫ Driver And Right Front Passenger Supplemental Restraint System (SRS)—Airbags ........... 5 3 ▫ Event Data Recorder (EDR) ............... 6 2 ▫ Child Restraint ........................ 6 4 m Engine Break-In Recommendations ........... 7 4 [...]

A WORD ABOUT YOUR KEYS The dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys from your dealer . Ask your dealer for these numbers and keep them in a safe place. Ignition Key Removal Automatic T ransmission Place the shift lever in P ARK. T urn the ignition switch[...]

in the ignition cylinder . If this occurs, rotate the key to the right slightly , then remove the key as described. If a malfunction occurs, the system will trap the key in the ignition cylinder to warn you that this safety feature is inoperable. The engine can be started and stopped but the key cannot be removed until you obtain service. W ARNING![...]

The system uses ignition keys, which have an embedded electronic chip (transponder), to prevent unauthorized vehicle operation. Therefor e, only keys that are pro- grammed to the vehicle can be used to start and operate the vehicle. The system will shut the engine off in two (2) seconds if someone uses an invalid key to start the engine. NOTE: A ke[...]

All of the keys provided with your new vehicle have been programmed to the vehicle electronics. Replacement Keys NOTE: Only keys that are programmed to the vehicle electronics can be used to start and operate the vehicle. Once a Sentry Key is programmed to a vehicle, it cannot be programmed to any other vehicle. CAUTION! Always remove Sentry Keys f[...]

3. Insert the second valid key into the ignition switch. T urn the ignition switch to the “ON” position within 15 seconds. After ten seconds, a chime will sound. In addition, the V ehicle Security Alarm Indicator Light will begin to flash. T urn the ignition switch to the “LOCK” position and remove the second key . 4. Insert a blank Sentry [...]

IGNITION AND STEERING LOCK In the LOCK position, the steering and ignition systems are locked to provide anti-theft pr otection for your ve- hicle. It may be difficult to turn the key from the LOCK position when starting your vehicle, if the steering wheel is locked. Move the steering wheel left and right while turning the key until it turns easily[...]

W ARNING! The key cannot be turned to LOCK until the selector is in the P ARK position. Do not attempt to pull the shift lever out of P ARK after the key is in the LOCK position. NOTE: The steering wheel will lock when the key is removed, and the steering wheel is turned around 1 15 degrees clockwise or 65 degrees counterclockwise from the center p[...]

T o Set the Alarm: The alarm will set when you use the power door locks or use the Keyless Entry transmitter to lock the doors. After all the doors are locked and closed the security light in the instrument cluster will flash rapidly to signal that the system is arming. The security light in the instrument panel cluster will flash rapidly for about[...]

UNLOCK button or by inserting a pr ogrammed Sentry Key into the ignition and turning the key to the ON position. ILLUMINA TED ENTR Y V ehicles Equipped With Power Door Locks All interior lights will illuminate in the vehicle when the doors are unlocked using the key fob. The interior lights will remain on for 30 seconds after the last door is close[...]

NOTE: Y our vehicle’s keyfob may have thr ee, four or five buttons (shown), depending on the optional features purchased with your vehicle. This system allows you to lock or unlock the doors and liftgate or activate the panic alarm from distances a minimum of 66 feet (20 meters) using a hand held radio transmitter . The transmitter need not be po[...]

3. Release both buttons at the same time. 4. T est the feature while outside of the vehicle, by pressing the LOCK/UNLOCK button on the keyfob. NOTE: Pressing the LOCK button on the keyfob while you are inside the vehicle will activate the Security Alarm. Opening a door with the Security Alarm activated will cause the alarm to sound. Press the UNLOC[...]

4. T o reactivate this featur e, repeat the above steps. 5. T est the horn chirp feature while outside of the ve- hicle, by pressing the LOCK button on the key fob with the ignition in the OFF position and the key removed. NOTE: Pressing the LOCK button on the keyfob, while you are inside the vehicle, will activate the Security Alarm. Opening a doo[...]

Using the Panic Alarm T o activate the Panic mode while the ignition is OFF press and release the P ANIC button on the transmitter once. When the Panic mode is activated, the interior lights will illuminate, the headlamps and parking lights will flash, and the horn will sound. T o cancel the Panic mode pr ess and r elease the P ANIC button on the t[...]

Programming Additional T ransmitters V ehicles will be shipped fr om the assembly plants with two key fob transmitters programmed only for that vehicle. A total of eight fobs can be pr ogrammed for your vehicle. Additional fobs can be programmed to your vehicle through the use of a currently programmed fob. NOTE: When entering program mode using th[...]

12. Repeat steps 8 through 10 to program up to six additional fobs. 13. T urn the ignition to the OFF position. 14. Y our vehicle will remain in program mode up to 60 seconds from when the original chime was heard. After 60 seconds, all programmed fobs function normally . NOTE: If you do not have a programmed transmitter , contact your dealer for d[...]

with your fingers. Skin oils may cause battery deteriora- tion. If you touch a battery , clean it with rubbing alcohol. 3. T o reassemble the transmitter case, snap the two halves of the case together . Make sur e there is an even “gap” between the two halves. If equipped, install and tighten the screw until snug. T est transmitter operation. R[...]

T o enter the vehicle while the engine is running during a remote start, you must first unlock the vehicle using the UNLOCK button on the key fob. After the vehicle is unlocked, you have 60 seconds to enter the vehicle, insert the key in the Ignition and move it to the RUN position, otherwise the engine will cancel remote start and auto- matically [...]

W ARNING! • For personal security and safety in the event of an accident, lock the vehicle doors when you drive as well as when you park and leave the vehicle. • Never leave children alone in a vehicle. Leaving children in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Don’t[...]

chime will sound if the key is in the ignition switch and a door is open, as a reminder to remove the key . Automatic Door Locks If this feature is enabled, your door locks will lock automatically when the vehicle’s speed exceeds 15 mph (24 km/h). Automatic Door Lock Programming This feature is enabled when your vehicle is shipped from the assemb[...]

Auto Unlock On Exit — If Equipped This feature unlocks all of the doors of the vehicle when any door is opened (excluding the liftgate). This will occur only after the vehicle has been shifted into the Park position after the vehicle has been driven (shifted out of Park and all doors closed). This feature will not operate if there is any manual o[...]

Child Protection Door Lock T o provide a safer environment for children riding in the rear seat, the rear doors of your vehicle have the child- protection door lock system. T o use the system, open each rear door and slide the control UP to engage the locks and DOWN to disengage the child-protection locks. When the system on a door is engaged, that[...]

WINDOWS Power Windows The control on the left front door has up-down switches that give you finger tip control of all four power win- dows. Ther e is a single opening and closing switch on the passenger doors for passenger window control. The windows will operate only when the ignition switch is turned to the ON position and for ten minutes after t[...]

Auto Down The driver’s and front passenger window switch has an Auto Down feature. Push the window switch past the first detent, release, and the window will go down automatically . T o cancel the Auto Down movement, operate the switch in either the up or down dir ection and release the switch. Auto Up Feature with Anti-Pinch Protection (Driver?[...]

Resetting the Auto-Up Feature Should the Auto-Up feature stop working the window probably needs to be reset. T o reset Auto-Up: Pull the window switch up and close the window com- pletely , then pull and hold the switch for 1 second. Window Lockout Switch The window lockout switch on the driver’s door allows you to disable the window control on t[...]

NOTE: When the engine is running fr om a Remote Start (if equipped), the vehicle must first be unlocked by pressing the remote transmitter UNLOCK button prior to activating the Power Liftgate otherwise the engine will stop automatically . Once unlocked, the liftgate can be opened or closed. T o open the liftgate, pull the exterior handle and open t[...]

When the remote keyless entry transmitter button is pressed two times and the “Lamp Flash” feature is enabled the turn signals will flash twice to signal that the liftgate is opening or closing. The power liftgate may also be opened by pressing the switch located on the overhead console. W ARNING! During power operation, personal injury or carg[...]

• The power liftgate must be in the full open position in order to power close. If the liftgate is not fully open, press the r emote keyless entry transmitter or overhead console button to fully open the liftgate and then press again to close. • If the liftgate handle is pulled while the power liftgate is closing, the liftgate will reverse to t[...]

W ARNING! • Driving with the liftgate open can allow poison- ous exhaust gases into your vehicle. Y ou and your passengers could be injured by these fumes. Keep the liftgate closed when you are operating the vehicle. • If you are required to drive with the liftgate open, make sure that all windows are closed, and the climate control blower swit[...]

W ARNING! In a collision, you and your passengers can suffer much greater injuries if you are not properly buckled up. Y ou can strike the interior of your vehicle or other passengers, or you can be thrown out of the vehicle. Always be sure you and others in your vehicle are buckled up properly . Buckle up even though you are an excellent driver , [...]

W ARNING! It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. Be sure everyone in your vehicle is in a seat and using a[...]

Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door . Sit back and adjust the seat. 2. The seat belt latch plate is above the back of the front seat, next to your arm in the rear seat. Grasp the latch plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to allow the belt to go around you[...]

W ARNING! • A belt buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you as well. In a sudden stop you could move too far forward, increas- ing the po[...]

W ARNING! • A lap belt worn too high can increase the risk of internal injury in a collision. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as pos- sible and keep it snug. • A twisted belt can’t do its job as well. In a collision it could even cut into you. Be sure the [...]

Adjustable Upper Shoulder Belt Anchorage In the front and second r ow outboard seats, the shoulder belt can be adjusted upwar d or downwar d to help position the belt away from your neck. Push in on the anchorage release button to release the anchorage, and then move it up or down to the position that serves you best. As a guide, if you ar e shorte[...]

Second Row Center Seat Belt The center seating position in the second row has a seat belt assembly that can be converted from the normal emergency locking mode to the automatic locking mode. The seat belt should only be used in the automatic locking mode when a child seat is installed at this seating location. When sitting in this seating location,[...]

How T o Use The Automatic Locking Mode 1. Buckle the combination lap/shoulder belt. 2. Grasp the shoulder portion and pull downward until the entire belt is extracted. 3. Allow the belt to retract. As the belt retracts, you will hear a clicking sound. This indicates the safety belt is now in the automatic locking mode. How T o Disengage The Automat[...]

W ARNING! • If the small (keyed buckle) latch plate and keyed buckle are not properly connected when the seat belt is used by an occupant, the seat belt will not be able to provide the proper restraint and will increase the risk of injury in a collision. • When reattaching the small (keyed buckle) latch plate and keyed buckle, ensure the seat b[...]

T o reattach the seat belt to the third row center seat, pull the small (keyed buckle) latch plate forward from the headliner slots and insert it into the keyed buckle until there is an audible click. Refer to the previous section for the proper seat belt usage. Third Row Center Seat Belt Headliner Stowage Slots THINGS TO KNOW BEFORE ST ARTING YOUR[...]

Seat Belt Pretensioners The seat belts for both front seating positions are equipped with pretensioning devices that are designed to remove any slack from the seat belt system in the event of a collision. These devices improve the performance of the seat belt by assuring that the belt is tight about the occupant early in a collision. Pretensioners [...]

Once the warning is triggered it can be paused if the vehicle speed drops below 5 mph (8 km/h. The warning will be r estarted if the vehicle speed becomes greater than 5 mph. The Enhanced W arning System (BeltAlert) can be en- abled or disabled by your authorized dealer or by following these steps: NOTE: The following steps must occur within the fi[...]

Seat Belts and Pregnant Women W e recommend that pregnant women use seat belts throughout their pregnancies. Keeping the mother safe is the best way to keep the baby safe. Pregnant women should wear the lap part of the belt across the thighs and as snug against the hips as possible. Keep the belt low so that it does not come across the abdomen. Tha[...]

Driver And Right Front Passenger Supplemental Restraint System (SRS)—Airbags This vehicle has airbags for both the driver and right front passenger as a supplement to the seat belt restraint systems. The driver’s front airbag is mounted in the steering wheel. The passenger front airbag is mounted in the instrument panel, above the glove compart[...]

W ARNING! • Do not put anything on or around the front airbag covers or attempt to manually open them. Y ou may damage the airbags and you could be injured because the airbags are no longer functional. These protective covers for the airbag cushions are designed to open only when the airbags are inflat- ing. • Y our vehicle is equipped with win[...]

Here ar e some simple steps you can follow to minimize the risk of harm from a deploying airbag. 1. Children 12 years and under should always ride buckled up in a rear seat in an appropriate child restraint. Infants in rear-facing child restraints should NEVER ride in the fr ont seat of a vehicle with a passenger front airbag. An airbag deployment [...]

W ARNING! • Relying on the airbags alone could lead to more severe injuries in a collision. The airbags work with your seat belt to restrain you properly . In some collisions the airbags won’t deploy at all. Always wear your seat belts even though you have airbags. • Being too close to the steering wheel or instrument panel during airbag depl[...]

How the Airbag System W orks • The Occupant Restraint Controller (ORC) determines if a frontal collision is severe enough to require the airbags to inflate. The fr ont airbag inflators are de- signed to pr ovide differ ent rates of airbag inflation from direction provided by the ORC. The ORC will detect a roll over when equipped with side airbags[...]

• The Driver and Passenger Airbag/Inflator Units are located in the center of the steering wheel and the right side of the instrument panel. When the ORC detects a collision requiring the airbags, it signals the inflator units. A large quantity of nontoxic gas is generated to inflate the front airbags. Differ ent airbag inflation rates may be pos[...]

NOTE: At no time should any supplemental restraint system (SRS) component or SRS related component or fastener be modified or replaced with any part except those which are approved by DaimlerChrysler/Mopar . • The Knee Impact Bolsters help protect the knees of the driver and the fr ont passenger , and position every- one for the best interaction [...]

irritation continues, see your doctor . If these particles settle on your clothing, follow the garment manufac- turer’s instructions for cleaning. • It is not advisable to drive your vehicle after the airbags have deployed. If you are involved in another collision, the airbags will not be in place to protect you. W ARNING! Deployed airbags and [...]

NOTE: Perchlorate Material – special handling may apply , See www .dtsc.ca.gov/hazardouswaste/per chlorate Enhanced Accident Response System If the airbags deploy after an impact and the electrical system remains functional, vehicles equipped with power door locks will unlock automatically , the engine will shut off and the hazard lights will tur[...]

Event Data Recorder (EDR) EDR will be activated on Fr ont, Side and roll over events. In the event of an accident, your vehicle is designed to recor d up to 5-seconds of specific vehicle data parameters (see the following list) in an event data recor der prior to the moment of airbag deployment, or near deployment, and up to a quarter second of hig[...]

provided to the custodial entity upon request. General data that does not identify particular vehicles or crashes may be released for incorporation in aggregate crash databases, such as those maintained by the US govern- ment and various states. Data of a potentially sensitive nature, such as would identify a particular driver , ve- hicle, or crash[...]

• T raction/stability control status • T ire pressur e monitoring system status (if equipped) Child Restraint Everyone in your vehicle needs to be buckled up all the time - babies and children, too. Every state in the United States and all Canadian provinces require that small children ride in pr oper restraint systems. This is the law , and yo[...]

by children who weigh more than 20 lbs (9 kg) but are less than one year old. Both types of child restraints are held in the vehicle by the lap/shoulder belt or the LA TCH child restraint anchorage system. (See the LA TCH - Child Seat Anchorage System section.) • Rearward-facing child seats must NEVER be used in the front seat of a vehicle with a[...]

• Check belt fit periodically . A child’s squirming or slouching can move the belt out of position. • If the shoulder belt contacts the face or neck, move the child closer to the center of the vehicle. Never allow a child to put the shoulder belt under an arm. W ARNING! • Improper installation can lead to failure of an infant or child restr[...]

around the child restraint so that it is not necessary to use a locking clip. If the seat belt has a cinching latch plate, pulling up on the shoulder portion of the lap/shoulder belt will tighten the belt. The cinching latch plate will keep the belt tight, however , any seat belt system will loosen with time, so check the belt occasionally and pull[...]

LA TCH - Child Seat Anchorage System (Lower Anchors and T ether for CHildren) Y our vehicle’s second r ow seat is equipped with the child restraint anchorage system called LA TCH. The LA TCH system provides for the installation of the child restraint without using the vehicle’s seat belts, instead securing the child restraint using lower anchor[...]

only install the child restraints using the vehicle’s seat belts. Please refer to the next section for typical installa- tion instructions. Second Row Seat Left Side Second Row Seat Right Side THINGS TO KNOW BEFORE ST ARTING YOUR VEHICLE 69 2 I n f o r m a t i o n P r o v i d e d b y :[...]

Installing the LA TCH-Compatible Child Restraint System W e urge that you carefully follow the dir ections of the manufacturer when installing your child r estraint. Not all child r estraint systems will be installed as described her e. Again, carefully follow the installation instructions that were provided with the child restraint system. The r e[...]

NOTE: When using the LA TCH attaching system to install a child restraint, please ensure that all seat belts not being used for occupant r estraints are stowed and out of reach of children. It is recommended that befor e installing the child restraint, buckle the seat belt so the seat belt is tucked behind the child r estraint and out of reach. If [...]

Installing Child Restraints Using the V ehicle Seat Belt The second and third row seats have either cinching latch plates or automatic locking retractors which are designed to keep the lap portion tight around the child restraint so that it is not necessary to use a locking clip. If the seat belt has a cinching latch plate, pulling up on the should[...]

back behind the center seating position. The hooks in the rear floor are NOT designed to withstand the forces that may occur during a crash. W ARNING! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor positions directly behind the child seat to secure a child restraint top[...]

2. Route the tether strap under the head restraint and between the two headrest posts. 3. Attach the tether strap hook of the child r estraint to the tether anchor located on the seat back and r emove the slack in the tether strap according to the manufacturer ’s instructions. W ARNING! An incorrectly anchored tether strap could lead to seat fail[...]

conditions under which vehicle operations will occur . The r ecommended viscosity and quality grades ar e shown in Section 7. NON-DETERGENT OR STRAIGHT MINERAL OILS MUST NEVER BE USED. A new engine may consume some oil during its first few thousand miles of operation. This is a normal part of the break-in and is not an indication of difficulty . SA[...]

compartment. In addition, inspect the exhaust system each time the vehicle is raised for lubrication or oil change. Replace or adjust as requir ed. Safety Checks Y ou Should Make Inside The V ehicle Heater Defroster Ducts Inspect the heater defroster ducts for proper operation. Check for proper air flow through all defroster ducts. If there ar e an[...]

Safety Checks Y ou Should Make Outside The V ehicle T ires Examine tires for tread wear or uneven wear patterns. Check for stones, nails, glass or other objects lodged in the tread. Inspect for tread cuts or sidewall cracks. Check wheel nuts for tightness and tires for proper pressur e. Lights Check the operation of all exterior lights. Check turn [...]

I n f o r m a t i o n P r o v i d e d b y :[...]

UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS m Mirrors ............................... 8 3 ▫ Inside Day/Night Mirror ................. 8 3 ▫ Automatic Dimming Mirror — If Equipped .... 8 3 ▫ Outside Mirrors ....................... 8 4 ▫ Exterior Mirrors Folding Feature — If Equipped ............................ 8 4 ▫ Electric[...]

▫ General Information ................... 1 1 4 m Seats ................................ 1 1 4 ▫ Front Seat Manual Seat Adjustment ........ 1 1 4 ▫ Front Seats Manual Seat Recliners .......... 1 1 5 ▫ Manual Lumbar Support Adjustment — If Equipped ........................... 1 1 6 ▫ Adjustable Head Restraints — All Seating Positions .[...]

▫ Battery Saver ........................ 1 3 9 ▫ Headlight Delay ...................... 1 3 9 ▫ Automatic Headlights — If Equipped ....... 1 4 0 ▫ Headlights, Parking Lights, Panel Lights ..... 1 4 0 ▫ Illuminated Entry ..................... 1 4 0 ▫ Daytime Running Lights (Canada Only) ..... 1 4 1 ▫ Lights-On Reminder ..............[...]

m Overhead Console W ith Electronic V ehicle Information Center (EVIC) — If Equipped ..... 1 5 9 ▫ Dome/Reading Lights .................. 1 5 9 ▫ Electronic V ehicle Information Center (EVIC) — If Equipped .................. 1 5 9 ▫ Compass/T emperature Button ............ 1 6 6 m Garage Door Opener — If Equipped ......... 1 6 8 ▫ Pro[...]

MIRRORS Inside Day/Night Mirror The mirror should be adjusted to center on the view through the rear window . A two-point pivot system allows for horizontal and vertical adjustment of the mirror . Annoying headlight glare can be reduced by moving the small control under the mirror to the night position (toward rear of truck). The mirror should be a[...]

CAUTION! T o avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror . Apply the solution onto a clean cloth and wipe the mirror clean. Outside Mirrors T o receive maximum benefit, adjust the outside mirror(s) to center on the adjacent lane of traffic with a slight overlap of the view obtained on the i[...]

Electric Remote-Control Mirrors The controls for the power mirrors are located on the driver’s door trim panel. T o adjust a mirror , turn the control wand toward the left or right mirror positions indicated. T ilt the control wand in the direction you want the mirror to move. When finished adjusting the mirror , turn the contr ol to the center p[...]

W ARNING! V ehicles and other objects seen in the right side convex mirror will look smaller and farther away than they really are. Relying too much on your right side mirror could cause you to collide with another vehicle or other object. Use your inside mirror when judging the size or distance of a vehicle seen in the right side mirror . Illumina[...]

Heated Mirrors — If Equipped Heated mirrors are automatically activated when you depress the rear window defroster switch located on the instrument panel. The light will illuminate to indicate that the heating elements are ON. T urning Off the rear window defroster or the ignition will deactivate the heated mirrors. Automatic Dimming Driver’s E[...]

NOTE: The UConnect™ system use requir es a cellular phone equipped with the Bluetooth 9 Hands-Free Profile, 9 version 0.96 or higher . See UConnect™ website for sup- ported phones. NOTE: For UConnect™ customer support, visit the following web sites: • www .chrysler .com/uconnect • www .dodge.com/uconnect • www .jeep.com/uconnect • or [...]

radio or the mirror has the two control buttons (Phone Button and V oice Recognition Button) that will enable you to access the system. V oice Recognition Button Actual button location may vary with radio. The individual buttons are described in the “Operation” section. The UConnect™ system can be used with any Hands- Free Profile certified B[...]

• For certain operations, compound commands can be used. For example, instead of saying 9 Setup 9 and then 9 Phone Pairing, 9 the following compound command can be said: 9 Setup Phone Pairing. 9 • For each feature explanation in this section, only the combined form of the voice command is given. Y ou can also break the commands into parts and s[...]

T o complete the pairing process, you will need to refer- ence your cellular phone owner’s manual. The UCon- nect™ website may also provide detailed instructions for pairing. The following are general phone to UConnect™ System pairing instructions: • Press the “Phone” button to begin. • After the 9 Ready 9 prompt and the following bee[...]

Dial by Saying a Number • Press the “Phone” button to begin. • After the 9 Ready 9 prompt and the following beep, say 9 Dial. 9 • System will pr ompt you to say the number you want call. • For example, you can say 9 234-567-8901. 9 The phone number that you enter must be of valid length and combination. Based on the country in which the[...]

Add Names to Y our UConnect™ Phonebook NOTE: Adding names to phone book is recommended when vehicle is not in motion. • Press the “Phone” button to begin. • After the 9 Ready 9 prompt and the following beep, say 9 Phonebook New Entry . 9 • When pr ompted, say the name of the new entry . Use of long names helps the voice recognition and [...]

Exchange Profile (OBEX). Please see your phone owners’ manual for specific instructions on how to send these entries from your phone. NOTE: • Phone handset must support Bluetooth OBEX trans- fers of phonebook entries to use this feature. • Some phones cannot send phonebook entries if they are already connected to any system via Bluetooth, and[...]

9 Phonebook Edit 9 can be used to add another phone number to a name entry that already exists in the phonebook. For example, the entry John Doe may have a mobile and a home number , but you can add John Doe’s work number later using the 9 Phonebook Edit 9 feature. Delete Entries in the UConnect™ Phonebook NOTE: Editing phone book entries is r [...]

• After confirmation, the phone book entries will be deleted. • Note that only the phone book in the current language is deleted. List All Names in the UConnect™ Phonebook • Press the “Phone” button to begin. • After the 9 Ready 9 prompt and the following beep, say 9 Phonebook List Names. 9 • The UConnect™ system will play the nam[...]

call, press and hold the ’Phone’ button until you hear a single beep indicating that the incoming call was rejected. Answer or Reject an Incoming Call - Call Currently in Progress If a call is currently in progr ess and you have another incoming call, you will hear the same network tones for call waiting that you normally hear when using your c[...]

Conference Call When two calls are in pr ogress (one active and one on hold), press and hold the “Phone” button until you hear a double beep indicating that the two calls have been joined into one conference call. Three-W ay Calling T o initiate three-way calling, press the “V oice Recogni- tion” button while a call is in progress and make [...]

Call Continuation Call continuation is pr ogression of a phone call on UConnect™ system after the vehicle ignition key has been switched to off. Call continuation functionality available on the vehicle can be any one of three types: • After ignition key is switched off, a call can continue on the UConnect™ system either until the call ends or[...]

Emergency Assistance If you are in an emergency and the mobile phone is reachable: • Pick up the phone and manually dial the emergency number for your area. If the phone is not reachable and the UConnect™ system is operational, you may reach the emer gency number as follows: • Press the “Phone” button to begin. • After the 9 Ready 9 pro[...]

Please r efer to the 24-Hour “T owing Assistance” cover- age details in the W arranty information booklet and on the 24–Hour T owing Assistance Card. Paging T o learn how to page refer to 9 W orking with Automated Systems. 9 Paging works properly except for pagers of certain companies which time-out a little too soon to work properly with the[...]

entries. T o use this feature, dial the number you wish to call and then press the “V oice Recognition” button and say “Send.” The system will prompt you to enter the name or number , say the name of the phonebook entry you wish to send. The UConnect™ will then send the corresponding phone number associated with the phone- book entry as t[...]

notification to inform you of your phone and network status when you are attempting to make a phone call using UConnect™. The status is given for roaming, network signal strength, phone battery strength, etc. Dialing Using the Cellular Phone Keypad Y ou can dial a phone number with your cellular phone keypad and still use the UConnect™ system ([...]

Advanced Phone Connectivity T ransfer Call to and from Cellular Phone The UConnect™ system allows on going calls to be transferred from your cellular phone to the UConnect™ system without terminating the call. T o transfer an ongo- ing call from your UConnect™ paired cellular phone to the UConnect™ system or vice-versa, press the “V oice [...]

• Press the “Phone” button to begin. • After the 9 Ready 9 prompt and the following beep, say 9 Setup Select Phone 9 and follow the prompts. • Y ou can also press the “V oice Recognition” button anytime while the list is being played, and then choose the phone that you wish to select. • The selected phone will be used for the next p[...]

From outside the UConnect™ mode (e.g. from radio mode) • Press and hold the “V oice Recognition” button for 5 seconds until the session begins, or , • Press the “V oice Recognition” button and say 9 Setup, V oice T raining 9 command. Repeat the words and phrases when prompted by the UConnect™ system. For best results, the V oice T r[...]

• fully closed windows, • dry weather condition. • Even though the system is designed for users speaking in North American English, French, and Spanish ac- cents, the system may not always work for some. • When navigating thr ough an automated system, such as voice mail, or when sending a page, at the end of speaking the digit string, make [...]

• dry weather condition. • operation from driver seat. • Performance, such as audio clarity , echo, and loudness to a large degree rely on the phone and network, and not the UConnect™ system. • Echo at far end can sometime be reduced by lowering the in-vehicle audio volume. • In a convertible vehicle, system performance may be compromis[...]

UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 109 3 I n f o r m a t i o n P r o v i d e d b y :[...]

1 10 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :[...]

UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 11 1 3 I n f o r m a t i o n P r o v i d e d b y :[...]

V oice Commands Primary Alternate(s) zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all V oice Commands Primary Alternate(s) call cancel confirmation prompts. continue delete dial download edit emergency English erase all Espanol Francais help home 1 12 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE I n f o[...]

V oice Commands Primary Alternate(s) language list names list phones mobile mute mute off new entry no pager pair a phone phone pairing pairing phonebook phone book previous recor d again V oice Commands Primary Alternate(s) redial return to main menu return or main menu select phone select send set up phone settings or phone set up towing assistan[...]

General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired op- eration. SEA TS Front Seat Manual Seat[...]

W ARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust any seat only while the vehicle is parked. Front Seats Manual Seat Recliners The bucket seats are equipped with r ecliners. The reclin- in[...]

Manual Lumbar Support Adjustment — If Equipped The manual lumbar support adjustment lever is located on the right side of the driver seat and on the left side of the passenger’s seat. Moving the lumbar control lever fore and aft increases or decreases the lumbar support. Adjustable Head Restraints — All Seating Positions Head restraints can r[...]

8 - W ay Driver’s Power Seat — If Equipped The driver power seat switches are located on the left side of the driver seat lower side trim. The bottom switch controls up/down, forward/rearwar d, and tilt adjust- ment. The top switch controls the seatback recline adjust- ment. Head Restraint Adjustment Power Seat Switch Location UNDERST ANDING TH[...]

4 - W ay Passenger’s Power Seat — If Equipped The front passenger’s power seat switches are located on the right side of the passenger seat lower side trim. The bottom switch contr ols forward/rearwar d adjustment. The top switch controls the seatback recline adjustment. NOTE: The 4 - way seat does not have an up/down adjustment. Heated Seats[...]

The front heated seat system allows the driver and front passenger to select from two differ ent levels of supple- mental electrical seat heating, or no seat heating to suit their individual comfort requir ements. W ith the ignition switch in the RUN position, depressing the heated seat switch rocker to its momentary high or low position provides p[...]

off. Both of the indicators on identifies High heat level. The lower indicator on only , identifies Low heat level. NOTE: The high heat setting will operate for appr oxi- mately 30 minutes. After 30 minutes, the system will automatically transition to the low heat setting. The low heat setting will operate for 30 minutes, then the system will turn [...]

Second Row Bucket Seats — Fold and T umble Second row bucket seats have seatback recliners on both seating positions. Raising the lever allows the seatback to be reclined an additional 1 1 degrees. The second r ow bucket seats can be folded and tumbled forward for easy access to the third seat or rear cargo area. T o fold and tumble the seat, fol[...]

4. Pull up on the release handle and lift to tumble the seat fully forwar d. If the seat contacts the rear of the front seat, move the front seat forward. T o relatch the seat, tilt the seat rearward and push down firmly to engage the r ear attachments. Then lift the seatback release lever and pull the seatback up to return it to its full upright p[...]

W ARNING! In a collision, you or others in your vehicle could be injured if seats are not properly latched to their floor attachments. Always be sure the seats are fully latched. Second Row 40/20/40 Seat — Fold and T umble The 40/20/40 seat configuration is standard on all mod- els. This seat is equipped with a unique fold-and-tumble feature. The[...]

T o Fold the 40% seatbacks fully raise the lever on the side of the seat to release the seatback. The seatback can now be folded into the down position for use as a cargo floor , or the seat can now be tumbled forward to allow access to the rear of the vehicle. T o fold the 20% seatback, pull the strap forward to r elease the seatback. Fold the sea[...]

T o T umble the 40% seat, fully raise the lever on the side of the seat to release the floor latches and tumble the seat. W ARNING! Do not drive the vehicle with the outer 40% second row seats in the tumbled position. The outer 40% second row seats are only intended to be tumbled for entry and exit to the third row seat. Failure to follow these ins[...]

NOTE: The seatback must be fully folded into the down position to allow the lever to be raised enough to release the floor latches. T o Fold and T umble the 2nd r ow 40% seats fr om the 3rd row , fully raise the lever at the rear of the seat to fold the seatback. Continue raising the lever to release the floor latches to tumble the seat. NOTE: The [...]

Seat Cushion Pockets Seat Cushion Movement Up And Forward UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 127 3 I n f o r m a t i o n P r o v i d e d b y :[...]

CAUTION! When loading cargo into the rear of you vehicle with the 3rd row seat folded flat, be careful not to damage the material on the head restraints. NOTE: The seat belt buckles are hinged to fold with the seat back. W ARNING! Do not sit in the third row seat unless the cushion and back are properly engaged. Proper engagement can be verified by[...]

Third Row 60/40 Folding — If Equipped Third Row Seat Third Row Seat 40% Seatback Fold UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 129 3 I n f o r m a t i o n P r o v i d e d b y :[...]

Third Row Seat Features Third Row Seat Folded Forward 130 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :[...]

DRIVER MEMOR Y SYSTEM — IF EQUIPPED Once programmed, the memory buttons 1 and 2 on the driver’s door panel can be used to recall the driver’s seat position, driver’s outside mirr or position, adjustable brake and accelerator pedals position, Automatic T em- perature Control (A TC) temperature and radio station preset settings. Y our Remote [...]

linked to either memory position. The memory system can accommodate up to two transmitters, each transmit- ter linked to either of the two memory positions. Setting Memory Positions and Linking Remote Keyless Entry T ransmitter to Memory NOTE: Each time the SET (S) button and a number ed button (1 or 2) are pressed, you erase the memory settings fo[...]

NOTE: A chime sound may be heard if Setting Memory was inhibited for any reason. Memory Position Recall NOTE: • The driver’s seat belt must be unbuckled to recall memory positions. • The vehicle must be in Park to recall memory posi- tions. • Not all motors may be moved at one time. Please refer to the 8-way power seat description. T o reca[...]

T o Disable A T ransmitter Linked to Memory 1. T urn the ignition switch to the OFF position and remove the key . 2. Press and release the memory SET (S) button located on the driver’s door . 3. W ithin 10 seconds, press and r elease the UNLOCK button on the Remote Keyless Entry transmitter . T o disable another transmitter linked to either memor[...]

Driver Easy Exit and Easy Entry Control This additional feature provides automatic driver’s seat positioning which will enhance driver mobility out of and into the vehicle. The seat cushion will move rear - ward approximately 2.5 inches (60 mm) when the key is removed from the ignition switch. The seat will move forward approximately 2.5 inches ([...]

Then push the safety latch lever to the left. It is located between the grille and hood opening right of the center . T o prevent possible damage, do not slam the hood to close it. Use a firm downwar d push at the center fr ont edge of the hood to ensure that both latches engage. Never drive your vehicle unless the hood is fully closed, with both l[...]

LIGHTS Headlight Switch Location Headlight Switch UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 137 3 I n f o r m a t i o n P r o v i d e d b y :[...]

Interior Lights Courtesy and dome lights are turned on when the front doors are opened, when the dimmer control (r otating wheel on the right side of the switch) is rotated to the second upwar d detent position, or when the UNLOCK button is pressed on the key fob. When a door is open and the interior lights ar e on, r otating the dimmer control all[...]

Battery Saver T o pr otect the life of your vehicle’s battery , Load Shed- ding is provided for both the interior and exterior lights. If the ignition is off and any door is left ajar for eight minutes or the dimmer control is rotated upwards for 15 minutes, the interior lights will automatically turn off. If the headlights remain on while the ig[...]

Automatic Headlights — If Equipped Automatic Headlights can be activated by rotating the rotary headlight switch to the symbol “A.” The head- lights will turn on when the engine is running and the ambient light sensor indicates that the headlights should be activated. The headlights will turn off if the headlight switch is rotated to the of f[...]

Daytime Running Lights (Canada Only) The headlights on your vehicle will illuminate when the engine is started. This provides a constant “Lights ON” condition until the ignition is turned OFF . The lights illuminate at reduced intensity . If the parking brake is applied the Daytime Running Lights will turn of f. If the headlights are activated,[...]

indicator light located in the instrument cluster will illuminate when the fog lights are on. The fog lights will turn off when the switch is pressed in, when the head- light switch is rotated to the OFF position, or the high beam is selected. Multifunction Control Lever The multifunction control lever is located on the left side of the steering co[...]

T urn Signal Auto-Mode T ap the multi-function control lever once and the turn signal (left or right) will flash 3 times, and automatically turn off. Passing Light Y ou can signal another vehicle with your headlights by partially pulling the multifunction lever towar d the steer- ing wheel. This will momentarily allow the high and low beams to ener[...]

WINDSHIELD WIPERS AND W ASHERS Windshield Wipers The wipers and washers are operated by a switch in the multifunction control lever . T urn the end of the handle to select the desired wiper speed. Intermittent W iper System The intermittent feature of this system was designed for use when weather conditions make a single wiping cycle, with a variab[...]

W ARNING! Sudden loss of visibility through the windshield could lead to an accident. Y ou might not see other vehicles or other obstacles. T o avoid sudden icing of the windshield during freezing weather , warm the windshield with defroster before and during wind- shield washer use. NOTE: A void using the wiper blades to remove frost or ice from t[...]

Windshield W ashers T o use the washer , push in on the washer knob on the end of the multifunction contr ol lever and hold while spray is desired. If the washer knob is depressed while in the delay range, the wiper will operate for several seconds after the washer knob is released. It will then resume the intermittent interval previously selected.[...]

TIL T STEERING COLUMN T o tilt the column, pull rearwar d on the lever below the turn signal control and move the wheel up or down, as desired. Push the lever forwar d to lock the column firmly in place. W ARNING! T ilting the steering column while the vehicle is moving is dangerous. Without a stable steering col- umn, you could lose control of the[...]

DRIVER ADJUST ABLE PEDALS — IF EQUIPPED The power adjustable accelerator and brake pedals allow the driver to establish a comfortable position relative to the steering wheel and pedals. Adjustment 1. Position the driver seat so that you ar e at least 10 inches (254 mm) away from the airbag located in the center of the steering wheel. 2. Fasten an[...]

CAUTION! Do not place any article under the adjustable pedals or impede its ability to move as it may cause damage to the pedal controls. Pedal travel may become lim- ited if movement is stopped by an obstruction in the adjustable pedal’s path. ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, this device takes over accelerator opera- tion a[...]

can be reactivated by pushing the speed control switch ON / OFF button and re-establishing the desired vehicle SET speed. Push the ON/OFF button to the ON position. In the instrument cluster , the wor d “CRUISE” illuminates when the system is on. T o Set At A Desired Speed When the vehicle has reached the desired speed, pr ess and release the S[...]

T o V ary The Speed Setting When the speed control is on, speed can be increased by pressing and holding the ACCEL button. When the button is released, a new set speed will be established. T apping the ACCEL button once will result in a speed increase (refer to the table below for the speed for your specific engine). Each time the button is tapped,[...]

T o Accelerate For Passing Depress the accelerator as you would normally . When the pedal is released, the vehicle will return to the set speed. NOTE: When driving uphill, at elevations above 2,000 feet (610 meters), or when the vehicle is heavily loaded (especially when towing) the vehicle may slow below the SET speed. If the vehicle speed drops b[...]

When the driver selects Reverse the system scans for objects behind the vehicle using four sensors located in the rear bumper . Objects can be detected from up to 78.7 inches (200 cm). A warning display above the rear window provides both visible and audible warnings indicating the range of the object. The warning display contains two sets of yello[...]

W ARNING DISPLA Y DIST ANCES DISPLA Y LED OBST ACLE DIST ANCE FROM: LED COLOR AUDIBLE SIGNAL REAR CORNERS REAR CENTER 1st LED 78.7 in. (200 cm) Y ellow None 2nd LED 51.1 in. (130 cm) Y ellow None 3rd LED 45.2 in. (1 15 cm) Y ellow None 4th LED 31.5 in. (80 cm) 39.3 in. (100 cm) Y ellow None 5th LED 25.5 in. (65 cm) 33.5 in. (85 cm) Y ellow None 6th[...]

W ARNING! • Drivers must be careful when backing up even when using the Rear Park Assist System. Always check carefully behind your vehicle, look behind you, and be sure to check for pedestrians, animals, other vehicles, obstructions, and blind spots before backing up. Y ou are responsible for safety and must continue to pay attention to your sur[...]

• Jackhammers, large trucks, and other vibrations could affect the performance of the system. If “Service Park Assist System” appears in the Electronic V ehicle Information Center (EVIC) after making sure the rear bumper is clean please see your authorized dealer . T o turn on/off the rear park assist system, refer to the Personal Settings (C[...]

W ARNING! Drivers must be careful when backing up even when using the Rear Camera System. Always check care- fully behind your vehicle, and be sure to check for pedestrians, animals, other vehicles, obstructions, or blind spots before backing up. Y ou are responsible for the safety of your surroundings and must con- tinue to pay attention while bac[...]

OVERHEAD CONSOLE The overhead console has the following features: • Courtesy Lights • Garage Door Opener — If Equipped • Electronic V ehicle Information Center (EVIC) — If Equipped Courtesy/Reading Lights Near the front of the console is one courtesy and two reading lights. All lights illuminate as courtesy lights when a door is opened, w[...]

OVERHEAD CONSOLE WITH ELECTRONIC VEHICLE INFORMA TION CENTER (EVIC) — IF EQUIPPED The overhead console contains dome/r eading lights, and an Electronic V ehicle Information Center (EVIC). Dome/Reading Lights Located in the overhead console are two dome/reading lights. The dome/reading lights illuminate when a door is opened or when the interior l[...]

T rip Functions Pressing the STEP button allows you to scroll through one of the following T rip Function features: • TRIP – Shows the total distance traveled since the last reset. T o reset the TRIP function, pr ess and hold the RESET button. • ELAPSED TIME – Shows the total elapsed time of travel since the last reset. Elapsed time will in[...]

NOTE: Significant changes in driving style or vehicle loading will greatly affect the actual drivable distance of the vehicle, regar dless of the DTE displayed value. • When the DTE value is less than 30 miles (48 km) estimated driving distance, the DTE display will change to a text display of 9 LOW FUEL. 9 This display will continue until the ve[...]

OIL CHANGE REQUIRED — If Equipped Y our vehicle is equipped with an engine oil change indicator system. The “Oil Change Required” message will flash in the EVIC display for approximately 10 seconds after a single chime has sounded to indicate the next scheduled oil change interval. The engine oil change indicator system is duty cycle based, w[...]

Use the STEP button to display one of the following: • “LANGUAGE” – When in this display you may select one of several different languages for all display nomenclature, including the trip functions. Press the RESET button while in this display to select your preferr ed language. Then, as you continue, the infor- mation will display in the s[...]

• “SOUND HORN W/LOCK > YES” – When ON is selected, a short horn sound will occur when the remote keyless entry “Lock” button is pressed. This feature may be selected with or without the flash lights on lock/unlock feature. T o make your selection, press and release the RESET button until “ON” or “OFF” appears. • “FLASH LA[...]

• “KEY OFF POWER DELA Y > OFF” – When this feature is selected, the power window switches, radio, hands–free system (if equipped), and power outlets will remain active for up to 60 minutes after the ignition switch is turned of f. Opening a vehicle door will cancel this feature. T o make your selection, press and release the RESET butt[...]

Compass/T emperature Button Pressing the Compass/T emperature button will return the display to the normal compass/ temperature display . NOTE: T emperature accuracy can be effected from heat soak. For best accuracy , the vehicle should be driven at a speed greater than 20 mph (32 km/h) for several min- utes. Automatic Compass Calibration This comp[...]

metallic objects) until the “CAL” message turns off. The compass will now function normally . Compass V ariance Compass V ariance is the differ ence between magnetic North and Geographic North. In some ar eas of the country , the differ ence between magnetic and geographic North is great enough to cause the compass to give false readings. If th[...]

1. T urn the ignition switch to the ON/RUN position. 2. Press the menu button until Personal Set- tings is displayed. 3. Press the STEP button until “Compass V ariance” is displayed. 4. Press and release RESET button until the proper variance zone is selected according to the variance map. 5. Press and release the Compass/T emperature button to[...]

W ARNING! V ehicle exhaust contains carbon monoxide, a danger- ous gas. Do not run your vehicle in the garage while training the transceiver . Exhaust gas can cause seri- ous injury or death. Programming HomeLink T Before Y ou Begin If you have not trained any of the HomeLink t buttons, erase all channels before you begin training. T o do this, pre[...]

If the EVIC display states “DID NOT TRAIN” r epeat Step 3. If the signal is too weak, replace the battery in the original hand-held transmitter . It may take up to 30 seconds, or longer in rare cases. The garage door may open & close while you train. NOTE: Some gate operators and garage door openers may requir e you to replace Step #3 with [...]

6. Firmly press and release the “learn” or “training” button. The name and color of the button may vary by manufacturer . NOTE: There ar e 30 seconds in which to initiate the next step after the “Learn” button has been pressed. 7. Return to the vehicle and pr ess the programmed HomeLink t button twice (holding the button for 2 sec- onds[...]

Similar to this Canadian law , some U.S. gate operators ar e designed to “time-out” in the same manner . It may be helpful to unplug the device during the cycling process to pr event possible overheating of the garage door or gate motor . If you are having dif ficulties programming a garage door opener or a gate operator , r eplace “Programmi[...]

3. W ithout releasing the button, proceed with PRO- GRAMMING HOMELINK Step #2 and follow all remain- ing steps. Security It is advised to erase all channels before you sell or turn in your vehicle. T o do this, press and hold the two outside buttons for 20 seconds until the EVIC message states “CHANNELS CLEARED.” Note that all channels will be [...]

NOTE: The transmitter has been tested and it complies with FCC and IC rules. Changes or modifications not expressly approved by the party r esponsible for compli- ance could void the user ’s authority to operate the device. The term “IC:” before the certification/registration num- ber only signifies that Industry Canada technical specifi- cat[...]

Express Open Feature During the Express Open operation, any movement of the switch will stop the sunr oof and it will remain in a partial open position. Again, momentarily pressing the switch rearwar d will activate the Expr ess Open Feature. T o close the sunr oof, hold the switch in the forward position. Again, any release of the switch will stop[...]

W ARNING! In an accident, there is a greater risk of being thrown from a vehicle with an open sunroof. Y ou could also be seriously injured or killed. Always fasten your seat belt properly and make sure all passengers are properly secured too. Do not allow small children to operate the sunroof. Never allow fingers or other body parts, or any object[...]

ELECTRICAL POWER OUTLETS This vehicle has three auxiliary power outlets that can provide up to 20 Amps of current for accessories de- signed for use with the standard power outlet adapters. The outlet located in the lower portion of the instrument panel has a snap on plastic cap so that it can be covered when not in use. As a safety precaution, the[...]

NOTE: When the Inverter Switch is pressed, ther e will be a delay of approximately 1 second before the inverter status indicator turns ON. The status Indicator of the AC power inverter indicates whether the inverter is produc- ing AC power . NOTE: Due to build in overload protection the inverter will shut down if the power rating is exceeded. W ARN[...]

Electrical Outlet Use With Engine OFF (Battery Fed Configuration) CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery , even when not in use (i.e. cellular phones, etc.). Eventually , if plugged in long enough, the vehicle’s battery will discharge suf ficiently to degrade battery life and/or prevent engine[...]

Reconfiguring Power Outlets T o reconfigur e the outlets, be sure the ignition is OFF before removing the fuse. The r econfigurable fuse loca- tion is a special design that allows the fuse to be installed in two differ ent ways. If the fuse is located in the 9 Upper or T op Position 9 the outlets will work at all times. If the fuse is located in th[...]

FLOOR CONSOLE Floor Console Features The Floor Console between the driver’s and front pas- senger’s seat, has the following features: • Miscellaneous storage compartments • Flexible cup holder inserts • Portable phone storage bin • Portable phone cor d routing between lid and base on forward edge • 12 V olt reconfigurable power outlet[...]

third row occupants. The four cupholders located in the center console may be removed for cleaning. Power Outlet and Portable Phone Storage The console is equipped with a power outlet, portable phone storage bin, and phone cord routing. The phone storage bin can be used when easy access to the phone is needed. Also, the power outlet inside the cons[...]

T o access the storage bin, lift up on the console door latch. F ACTOR Y INST ALLED ROOF LUGGAGE RACK The load carried on the roof when equipped with a luggage rack must not exceed 68 kg (150 lbs.), and should be uniformly distributed over the cargo area. Rear Floor Console UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 183 3 I n f o r m a t i o n P [...]

The side rails between the stantions should be used to tie down cargo. Check the straps frequently to be sure that the load remains securely attached. NOTE: Crossbars are offer ed by Mopar t accessories. External racks do not increase the total load carrying capacity of the vehicle. Be sure that the total occupant and luggage load inside the vehicl[...]

W ARNING! Cargo must be securely tied before driving your vehicle. Improperly secured loads can fly off the vehicle, particularly at high speeds, resulting in per- sonal injury or property damage. Follow the roof rack Cautions when carrying cargo on your roof rack. CARGO MANAGEMENT SYSTEM—IF EQUIPPED The car go management system consists of a rem[...]

T o open the side cover , pull on the cover latch, and attach the cord to the upper cargo net hook. T o open the main cover , pull up on the latch, and attach the cord to the rear seat head restraint post. T o open the Cargo divider , lift up on the car go divider handles, raising the doors to the full open position. Raise the side panels until the[...]

INSTRUMENT P ANEL AND CONTROLS CONTENTS m Instruments And Controls ................. 1 9 1 m Instrument Cluster ...................... 1 9 2 m Instrument Cluster Description ............. 1 9 3 m Electronic Digital Clock .................. 2 0 4 ▫ Clock Setting Procedur e................. 2 0 4 m Radio General Information ................ 2 0 5 ?[...]

m Sales Code RES — AM/FM Stereo Radio W ith CD Player (MP3 AUX Jack) ................ 2 0 9 ▫ Operating Instructions - Radio Mode ....... 2 0 9 ▫ Operation Instructions - CD Mode For CD And MP3 Audio Play .................. 2 1 5 ▫ Notes On Playing MP3 Files ............. 2 1 7 ▫ List Button (CD Mode For MP3 Play) ....... 2 1 9 ▫ Info B[...]

▫ List Or Browse Mode .................. 2 4 3 m V ideo Entertainment System (Sales Code XR V) — If Equipped ............ 2 4 4 m Satellite Radio — If Equipped .............. 2 4 4 ▫ System Activation ..................... 2 4 5 ▫ Electronic Serial Number/Sirius Identification Number (ESN/SID) .................... 2 4 5 ▫ Selecting Sate[...]

▫ Air Conditioning Operation .............. 2 5 2 ▫ Front Blower Control ................... 2 5 2 ▫ Front Mode Control ................... 2 5 3 ▫ Rear T emperature Control — If Equipped .... 2 5 5 ▫ Rear W indow Defrosting And Rear W indow W asher/W iper ....................... 2 5 6 ▫ Automatic T emperature Control (A TC) — If Eq[...]

INSTRUMENTS AND CONTROLS INSTRUMENT P ANEL AND CONTROLS 191 4 I n f o r m a t i o n P r o v i d e d b y :[...]

Instrument Cluster 192 INSTRUMENT P ANEL AND CONTROLS I n f o r m a t i o n P r o v i d e d b y :[...]

INSTRUMENT CLUSTER DESCRIPTION 1. Fuel Gage The fuel gauge shows level of fuel in tank when ignition switch is in the ON position. 2. T emperature Gage The temperature gage indicates engine coolant temperature. Any reading within the normal range indicates that the cooling system is operat- ing satisfactorily . The gage needle in V6 and V8 engines [...]

left/right turn signal is left on with the engine RPM vehicle speed greater than 15 mph (24 km/h) for more than one mile. 4. Low Fuel W arning Light This indicator lights when the fuel gauge reads 1/16 of a tank or less. 5. High Beam Indicator Indicates that headlights are on high beam. 6. Seat Belt Reminder Light This light comes on for several se[...]

W ARNING! A hot engine cooling system is dangerous. Y ou or others could be badly burned by steam or boiling coolant. Y ou may want to call a service center if your vehicle overheats. If you decide to look under the hood yourself, see Section 7 of this manual. Follow the warnings under the Cooling System Pressure Cap paragraph. 8. Speedometer Shows[...]

illuminates and the ABS is switched off. When the voltage is above this value again, the malfunction indi- cator light should go out and the ABS is operational. If the malfunction indicator light stays illuminated, have the system checked at your authorized dealer as soon as possible. 12. Engine Oil Pressur e Indicator Light This light indicates th[...]

The two trip odometers show individual trip mileage. T o switch from odometer to trip odometers, press and release the T rip Odometer button. T o reset a trip odometer , display the desired trip odom- eter to be reset then push and hold the button until the display resets (approximately 2 seconds). V ehicle W arning Messages For non-Electronic V eh[...]

Unless reset, this message will continue to display each time you turn the ignition switch to the ON/RUN position. T o turn off the message temporarily , press and release the T rip Odometer button on the instrument cluster . T o r eset the oil change indicator system (after performing the scheduled maintenance) refer to the fol- lowing procedur e.[...]

9 ESP/TCS Indicator Light 9 starts to flash as soon as the tires lose traction and the ESP system becomes active. The 9 ESP/TCS Indicator Light 9 also flashes when TCS is active. If the 9 ESP/TCS Indicator Light 9 begins to flash during acceleration, ease up on the accelerator and apply as little throttle as possible. Be sure to adapt your speed an[...]

have the bulb repaired pr omptly . If the light stays on, it may be an indication that the parking brake has not been released, or ther e is a low brake fluid level. If the light remains on when the parking brake has been disengaged, and the fluid level is at the full mark on the master cylinder reservoir , it indicates a possible brake hydraulic s[...]

23. Malfunction Indicator Light This light is part of an onboard diagnostic system which monitors the emissions and engine control system. If the vehicle is ready for emissions testing the light will come on when the ignition is first turned on and remain on, as a bulb check, until the engine is started. If the vehicle is not ready for emissions te[...]

As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS) that illuminates a low tire pressure telltale when one or more of your tires are significantly under-inflated. Ac- cordingly , when the low tire pressur e telltale illuminates, you should stop and check your tires as soon as possible, and inflat[...]

CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system opera- tion or sensor damage may result when using re- placement equipment that is not of the same size, type, and/or style. Aftermarket wheels can cause se[...]

30. 4LOW Indicator Indicates transfer case is in 4LOW position. 31. Odometer/T rip Odometer Button Press this button to toggle between the odometer and the trip odometer display . Holding the button in resets the trip odometer reading. ELECTRONIC DIGIT AL CLOCK The clock and radio each use the display panel built into the radio. A digital r eadout [...]

RADIO GENERAL INFORMA TION Radio Broadcast Signals Y our new radio will provide excellent reception under most operating conditions. Like any system, however , car radios have performance limitations, due to mobile op- eration and natural phenomena, which might lead you to believe your sound system is malfunctioning. T o help you understand and sav[...]

will remain active for up to 10 minutes after the ignition switch has been turned off. Opening a vehicle front door will cancel this feature. SALES CODE REN — MUL TIMEDIA SYSTEM — IF EQUIPPED NOTE: The sales code is located on the lower right side of the unit’s faceplate. The REN multimedia system contains a radio, CD/DVD player , USB port, a[...]

Operating Instructions — Satellite Radio (If Equipped) Refer to your Radio Specific User’s Manual for detailed operating instructions. Operating Instructions — Hands-Free Communication (UConnect™) (If Equipped) Refer to “Hands-Free Communication (UConnect™)” in Section 3 of this manual for detailed operating instructions. Clock Settin[...]

3. When this feature is on, a check mark will appear in the box next to the words “Daylight Savings.” T ouch the screen where the words “Daylight Savings” are dis- played to change the current setting. Show T ime if Radio is Off When selected, this feature will display the time of day on the touch screen when the system is turned off. Proce[...]

SALES CODE RES — AM/FM STEREO RADIO WITH CD PLA YER (MP3 AUX JACK) NOTE: The radio sales code is located on the lower right side of your radio faceplate. Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Press the ON/VOLUME control knob to tu[...]

to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping until you release it. SCAN Button Pressing the SCAN button causes the tuner to sear ch for the next listenable station in AM or FM frequencies, pausing for 5 second[...]

3. After adjusting the hours, press the right side TUNE control knob to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side TUNE control knob. Press the TUNE contr ol knob to save time change. 5. T o exit, press any button/knob or wait 5 seconds. The clock can also be set by pressing the SETUP button. For ve[...]

Press the rotary TUNE control knob a third time and TREBLE will display . T urn the TUNE control knob to the right or left to increase or decrease the T reble tones. Press the rotary TUNE contr ol knob a fourth time and BALANCE will display . T urn the TUNE control knob to the right or left to adjust the sound level fr om the right or left side spe[...]

Program T ype 16 Digit-Character Display Nostalgia Nostalga Oldies Oldies Personality Persnlty Public Public Rhythm and Blues R & B Religious Music Rel Musc Religious T alk Rel T alk Rock Rock Soft Soft Soft Rock Soft Rck Soft Rhythm and Blues Soft R&B Sports Sports T alk T alk T op 40 T op 40 W eather W eather By pressing the SEEK button w[...]

AM and FM Buttons Press the buttons to select AM or FM Modes. SET Button — T o Set the Push-Button Memory When you are receiving a station that you wish to commit to push-button memory , press the SET button. The symbol SET 1 will now show in the display window . Select the button (1-6) you wish to lock onto this station and press and release tha[...]

Operation Instructions - CD MODE for CD and MP3 Audio Play NOTE: The ignition switch must be in the ON or ACC position to operate the radio. NOTE: This Radio is capable of playing compact discs (CD), recordable compact discs (CD-R), rewritable com- pact discs (CD-RW) compact discs with MP3 tracks and multisession compact discs with CD and MP3 track[...]

EJECT Button - Ejecting a CD Press the EJECT button to eject the CD. If you have ejected a disc and have not removed it within 10 seconds, it will be reloaded. If the CD is not removed, the radio will reinsert the CD but will not play it. A disc can be ejected with the radio and ignition OFF . NOTE: Ejecting with ignition OFF is not allowed on conv[...]

RND Button (Random Play Button) Press this button while the CD is playing to activate Random Play . This feature plays the selections on the compact disc in random order to provide an interesting change of pace. Press the right SEEK button to move to the next ran- domly selected track. Press the RND button a second time to stop Random Play . Notes [...]

• Maximum number of characters in file/folder names: • Level 1: 12 (including a separator 9 . 9 and a 3-character extension) • Level 2: 31 (including a separator 9 . 9 and a 3-character extension) Multisession disc formats are supported by the radio. Multisession discs may contain combinations of normal CD audio tracks and computer files (inc[...]

Playlist files are not supported. MP3 Pro files are not supported. Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files. Loading times for playback of MP3 files may be af fected by th[...]

Press the INFO button once more to r eturn to 9 elapsed time 9 priority mode. Press and hold the INFO button for 3 seconds or mor e and radio will display song titles for each file. Press and hold the INFO button again for 3 seconds to return to 9 elapsed time 9 display . Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio [...]

SALES CODE REQ — AM/FM STEREO RADIO AND 6–DISC CD/DVD CHANGER (MP3/WMA AUX JACK) NOTE: The radio sales code is located on the lower right side of your radio faceplate. Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Press the ON/VOL contr[...]

will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping until you release it. SCAN Button (Radio Mode) Pressing the SCAN button causes the tuner to sear ch for the next listenable station, in AM, FM or Satellite (if equipped) frequencies, pausing for 5 seconds at each listen[...]

3. After adjusting the hours, press the right side TUNE control knob to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side TUNE control knob. Press the TUNE contr ol knob to save time change. 5. T o exit, press any button/knob or wait 5 seconds. The clock can also be set by pressing the SETUP button and sel[...]

Press the rotary TUNE control knob a third time and TREBLE will display . T urn the TUNE control knob to the right or left to increase or decrease the T reble tones. Press the rotary TUNE contr ol knob a fourth time and BALANCE will display . T urn the TUNE control knob to the right or left to adjust the sound level fr om the right or left side spe[...]

Program T ype 16 Digit-Character Display Nostalgia Nostalga Oldies Oldies Personality Persnlty Public Public Rhythm and Blues R & B Religious Music Rel Musc Religious T alk Rel T alk Rock Rock Soft Soft Soft Rock Soft Rck Soft Rhythm and Blues Soft R&B Sports Sports T alk T alk T op 40 T op 40 W eather W eather By pressing the SEEK button w[...]

• DVD Enter - When the disc is in DVD Menu mode, selecting DVD Enter will allow you to play the current highlighted selection. Use the remote control to scroll up and down the menu (If Equipped). • DISC Play/Pause - Y ou can toggle between playing the DVD and pausing the DVD by pushing the SELECT button (If Equipped). • DVD Play Options - Sel[...]

• Player Defaults - Selecting this item will allow the user to scroll through the following items, and set defaults according to customer preference. Menu Language — If Equipped Selecting this item will allow the user to choose the default startup DVD menu language (effective only if language supported by disc). If customer wishes to select a l[...]

Audio DRC — If Equipped Selecting this item will allow the user to limit maximum audio dynamic range - The default is set to 9 High, 9 and under this setting, dialogues will play at 1 1 db higher than if the setting is 9 Normal. 9 Aspect Ratio — If Equipped Selecting this item will allow the user to choose between wide screen, pan scan, and let[...]

window . Each button can be set for SET 1 and SET 2 in both AM and FM. This allows a total of 12 AM, 12 FM, and 12 Satellite (if equipped) stations to be stored into push-button memory . The stations stored in SET 2 memory can be selected by pressing the push-button twice. Every time a preset button is used, a corresponding button number will displ[...]

NOTE: The ignition switch must be in the ON or ACC position to operate the radio. LOAD Button — Loading Compact Disc(s) Press the LOAD button and the push-button with the corresponding number (1-6) where the CD is being loaded. The radio will display PLEASE W AIT and prompt when to INSERT DISC. After the radio displays 9 INSER T DISC, 9 insert th[...]

SCAN Button (CD MODE) Press the Scan button to scan through each track on the CD currently playing. TIME Button (CD MODE) Press this button to change the display from a large CD playing time display to a small CD playing time display . R W/FF (CD MODE) Press and hold FF (Fast Forward) and the CD player will begin to fast forward until FF is release[...]

The radio uses the following limits for file systems: • Maximum number of directory levels: 8 • Maximum number of files: 255 • Maximum number of folders: 100 • Maximum number of characters in file/folder names: • Level 1: 12 (including a separator 9 . 9 and a 3-character extension) • Level 2: 31 (including a separator 9 . 9 and a 3-char[...]

MPEG Specification Sampling Fre- quency (kHz) Bit rate (kbps) MPEG-1 Audio Layer 3 48, 44.1, 32 320, 256, 224, 192, 160, 128, 1 12, 96, 80, 64, 56, 48 MPEG-2 Audio Layer 3 24, 22.05, 16 160, 128, 144, 1 12, 96, 80, 64, 56, 48 WMA Specification Sampling Fre- quency (kHz) Bit Rate (kbps) WMA 44.1 and 48 48, 64, 96, 128, 160, 192 VBR ID3 T ag informat[...]

LIST Button (DISC Mode for MP3/WMA Play) Pressing the LIST button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the TUNE contr ol knob. Selecting a folder by pressing the TUNE contr ol knob will begin playing the files contained in that folder (or the next folder in sequence if the selection does [...]

SCAN Button (Auxiliary Mode) No function. EJECT Button (Auxiliary Mode) No function. TIME Button (Auxiliary Mode) Press this button to change the display from elapsed playing time to time of day . The time of day will display for 5 seconds. R W/FF (Auxiliary Mode) No function. SET Button (Auxiliary Mode) No function. Operating Instructions - Hands [...]

Macrovision This product incorporates copyright pr otection technol- ogy that is protected by U.S. patents and other intellec- tual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineeri[...]

music and photos from CDs or through the USB port. While the Gracenote database finds the artist, track, and title for the music. An auxiliary input jack permits passengers to listen to a portable MP3 player thr ough the vehicle’s speakers. For vehicles equipped with the V ehicle Entertainment System (VES), separate audio outputs allow passengers[...]

Changing the T ime Zone 1. T urn on the system. 2. T ouch the screen where the time is displayed. The clock setting menu will appear on the screen. If the wor ds “T ime: GPS T ime” are displayed at the top of the screen, proceed to Step 4. Otherwise, proceed to Step 3. 3. If the words “T ime: User Clock” are displayed at the top of the scre[...]

2. T ouch the screen where the time is displayed. The clock setting menu will appear on the screen. If the wor ds “T ime: User Clock” are displayed at the top of the scr een, proceed to Step 4. Otherwise, proceed to Step 3. 3. If the wor ds “T ime: GPS T ime” ar e displayed at the top of the screen, touch the bottom of the screen where the [...]

UNIVERSAL CONSUMER INTERF ACE (UCI) — IF EQUIPPED NOTE: This section is for sales code RES and REQ radios only with UConnect.™ For sales code REN touch screen radio, refer to the separate User’s Manual. This feature allows you to plug in an iPod t into the vehicle’s sound system thr ough a connector (UCI connec- tor) using an optional conne[...]

Play Mode When switched to UCI mode the iPod t will be in Play mode . In this Play mode , you may use the following buttons on the radio faceplate to contr ol the iPod t and display data: TUNE/SCROLL Knob Use the “TUNE/SCROLL” knob to go to the next or previous track. The “TUNE/SCROLL” knob functions similar to the scroll wheel on the iPod [...]

previous track in the list, if you press this button at any other time in the current track it will go back to the beginning of the track. If the right (up) button is pressed during Play mode, it will go to the next track in the list. INFO Button Press the “INFO” button while a track is playing to see the information (T rack T itle, Artist, Alb[...]

List or Browse Mode During Play mode, pressing any of the following buttons will take you to List mode. List mode enables you to scroll through the list of menus and tracks on the iPod t . TUNE/SCROLL Knob In the List mode, the “TUNE/SCROLL” knob functions in a similar manner as the scroll wheel on the iPod t . T urning the “TUNE/SCROLL” kn[...]

T o exit the List mode without selecting a track, press the same preset button again to go back to Play mode. LIST Button Pressing the “LIST” button will take to the top level menu of the iPod t . This takes you to the same top level menu as on your iPod t . T urn the “TUNE/SCROLL” knob to list the top menu item you wish to select and then [...]

System Activation Sirius Satellite Radio service is pre-activated, and you may begin listening immediately to the one year of SIRIUS audio service that is included with the factory- installed satellite radio system in your vehicle. Sirius will contact you to supply a welcome kit and to confirm subscription information, including the set up of your [...]

ESN/SID Access with RAQ and RAK Radios W ith the ignition switch in the ACCESSORY position and the radio OFF , press the CD Eject and TIME buttons simultaneously for 3 seconds. All twelve ESN/SID num- bers will display . The radio will exit the ESN/SID mode when any other button is pushed, the ignition is turned OFF , or 5 minutes has passed since [...]

Selecting a Channel Press and release the SEEK or TUNE knob to search for the next channel. Press the top of the button to search up and the bottom of the button to search down. Holding the TUNE button causes the radio to bypass channels until the button is released. Press and r elease the SCAN button (if equipped) to automatically change channels [...]

NOTE: Pressing the 9 SEEK 9 or 9 SCAN 9 button, while performing a music type scan, will change the channel by one and stop the sear ch. Pr essing a pre-set memory button during a music type scan, will call up the memory channel and stop the search. PTY Button ( SEEK ( When the desired program is obtained, press the 9 SEEK 9 button within five seco[...]

REMOTE SOUND SYSTEM CONTROLS — IF EQUIPPED The remote sound system controls ar e located on the rear surface of the steering wheel. The left- and right-hand controls are rocker-type switches with a push-button in the center of each switch. Reach behind the steering wheel to access the switches. Right-Hand Switch Functions • Press the top of the[...]

Left-Hand Switch Functions for Media (i.e. CD) Operation • Press the top of the switch once to listen to the next track. • Press the bottom of the switch once either to listen to the beginning of the curr ent track or to listen to the beginning of the previous track if it is within one second after the current track begins to play . • Press t[...]

NOTE: If you experience difficulty in playing a particu- lar disc, it may be damaged (i.e. scratched, reflective coating removed, a hair , moisture or dew on the disc) oversized, or have theft pr otection encoding. T ry a known good disc before considering disc player service. RADIO OPERA TION AND CELLULAR PHONES Under certain conditions, the cellu[...]

Air Conditioning Operation T o turn the air conditioning On or Off perform the following steps: • Position the mode control button to the desired airflow setting. • Set the front blower control to any desired speed. • Press the Snowflake (A/C) button which is located to the right of the temperature control slide. An indicator light on the Sno[...]

Front Mode Control The mode control allows you to choose from several patterns of air distribution. NOTE: T o improve your selection choices, the system allows you to operate at intermediate positions between the major modes. These intermediate positions are iden- tified by the small dots and give an even blend of both modes. Recirculation Mode (Pa[...]

Bi-Level Air flows thr ough the outlets located in the instru- ment panel and those located on the floor . NOTE: There is a dif ference in temperatur e between the upper and lower outlets for added comfort. The warmer air goes to the floor outlets. This featur e gives improved comfort during sunny but cool conditions. Heat (Floor) Outside air flows[...]

T emperature Control The temperature of the air is controlled by a slide located on the top center of the control panel. Move the slide left or right to change the temperature. The blue area of the scale indicates cooler temperatures while the r ed ar ea indicates warmer temperatures. Rear T emperature Control — If Equipped Rotating this knob lef[...]

mode on the front contr ol will give you air from the outlets in the headliner in the rear . Floor mode in the front will give you floor in the rear . Rear Window Defrosting and Rear Window W asher/Wiper See the “Rear W indow Features” section of this book. Automatic T emperature Control (A TC) — If Equipped The control can be turned on by pr[...]

Automatic Control The A TC system can maintain a steady comfort level in various weather conditions with a simple operation: • Select your desired temperature setting by pressing the + or - side of the TEMP rocker switches. A digital temperature setting for driver and passenger will be displayed. The A TC system uses an infrared sensor located in[...]

feature. Refer to the 9 Over head Console-Customer Pro- grammable Features. 9 The mode will also be shown in the display and will change as r equired during automatic operation. NOTE: The system can be put into recir culate mode without affecting A TC operation. This will prevent out- side air from entering the vehicle. Use this mode to temporarily[...]

engine speed or power may be noticed when the com- pressor cycles. This is a normal occurrence since the compressor will cycle on and off to maintain comfort and improve fuel economy . Recirculate Button Press this button to r ecirculate the air inside the vehicle. Outside air is prevented from entering the vehicle. Use this mode to temporarily blo[...]

Bi-Level Air flows thr ough the outlets located in the instru- ment panel and those located on the floor . NOTE: There is a dif ference in temperatur e between the upper and lower outlets for added comfort. The warmer air goes to the floor outlets. This featur e gives improved comfort during sunny but cool conditions. Defrost Outside air is directe[...]

REAR OFF This turns the rear system off. The control will return to the front system display after approximately 5 seconds if no buttons are pushed while in one of the rear system displays. Y ou may also return to the front system display sooner by pushing any button except the POWER/F AN knob, the rear button, the driver/passenger temp rocker butt[...]

The r ear compartment contr ol uses two rotary knobs: one for the temperature control and the other for the fan speed contr ol. The mode for the rear air conditioning and heating system is always controlled by the front control unit. Fan and temperatur e can be contr olled fr om the front control unit or the rear control unit. Rear Rotary Blower Co[...]

NOTE: For best operation, make sure that ventilation grilles located in the rear storage area are not obstructed by stowed articles. Front Unit to Rear Unit Chart If the Front Control is selected Rear Airflow will come from Panel Headliner Bi-Level Headliner Floor Floor Mix Floor Defrost Floor Operating Tips Fast Cooldown For a fast cooldown, set t[...]

and adjust the temperature control and blower speed as necessary to maintain comfort. For high humidity condi- tions it may be necessary to remain in the Recirculation mode to maintain comfort. W indow Fogging W indows will fog on the inside when the humidity inside the vehicle is high. This often occurs in mild or cool temperatures when it’s rai[...]

Operating Tips Chart INSTRUMENT P ANEL AND CONTROLS 265 4 I n f o r m a t i o n P r o v i d e d b y :[...]

REAR WINDOW FEA TURES Rear Window Wiper/W asher A rotating switch located on the climate control panel turns the rear wiper On or Off. Pressing the rotating switch inwar d activates the rear window washer . Rotating the switch will enable one of five intermittent delay times for the rear wiper . The delay times range from 20 to 1 second. 266 INSTRU[...]

If the rear wiper is operating when the ignition is turned off, the wiper will automatically return to the “Park” position. When the vehicle is restarted, the wiper will resume operation. Rear Window Defrosting A push-button type switch is located in the climate control panel. Pr ess the switch and the rear win- dow defroster and electric remot[...]

I n f o r m a t i o n P r o v i d e d b y :[...]

ST ARTING AND OPERA TING CONTENTS m Starting Procedures ..................... 2 7 3 ▫ Automatic T ransmission ................ 2 7 3 ▫ Normal Starting ...................... 2 7 3 m Engine Block Heater – If Equipped .......... 2 7 6 m Automatic T ransmission .................. 2 7 6 ▫ Automatic T ransmission ................ 2 7 6 m Four-Wh[...]

m Brake System .......................... 2 9 1 ▫ Four-Wheel Anti-Lock Brake System (ABS) . . . 291 m Power Steering ........................ 2 9 4 m Electronic Brake Control System ............ 2 9 5 ▫ ABS (Anti-Lock Brake System) ............ 2 9 5 ▫ BAS (Brake Assist System) ............... 2 9 6 ▫ TCS (T raction Control System) ........[...]

m Supplemental T ire Pressure Information — If Equipped ............................ 3 2 2 m T ire Chains ........................... 3 2 2 m Snow T ires ........................... 3 2 3 m T ire Rotation Recommendations ............ 3 2 4 m T ire Pressure Monitor System (TPMS) — If Equipped ............................ 3 2 5 ▫ Base System ?[...]

▫ Cruising Range ....................... 3 4 2 ▫ Replacement Parts ..................... 3 4 2 ▫ Maintenance ......................... 3 4 2 m V ehicle Loading ........................ 3 4 3 ▫ Certification Label ..................... 3 4 3 ▫ Curb W eight ......................... 3 4 4 ▫ Loading ............................ 3 4 4 m T r[...]

ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. W ARNING! Be sure to turn off the engine and remove the key from the ignition switch if you want to rest or sleep in your car . Accidents can be caused by inadvertently moving the gear selection lever or by pressi[...]

T ip Start Feature Y our vehicle has a “T ip Start” starting system. W ith “T ip Start” the driver does not need to hold the key in the ’Start’ position until the vehicle starts, but can release the key (still in the ignition) and the vehicle will continue through the start cycle. • T urn the ignition key to the ST ART position, until[...]

W ARNING! Do not attempt to push or tow your vehicle to get it started. V ehicles equipped with an automatic trans- mission cannot be started this way . Unburned fuel could enter the catalytic converter and once the engine has started, ignite and damage the converter and vehicle. If the vehicle has a discharged battery , booster cables may be used [...]

ENGINE BLOCK HEA TER – IF EQUIPPED The engine block heater warms engine coolant and permits quicker starts in cold weather . Connect the cor d to a standard 1 10-1 15 volt AC electrical outlet with a grounded, three wire extension cord. The 3.7L/4.7L engine block heater cord is located at the front of the engine compartment near the radiator cap.[...]

“P” Park Supplements parking brake by locking the transmission. Engine can be started in this range. Never use Park while vehicle is in motion. Apply parking brake when leaving vehicle in this range. Always apply parking brake first, then place selector in Park position. W ARNING! Y our vehicle could move and injure you and others if it is not [...]

“R” Reverse Use this range only after the vehicle has come to a complete stop. “N” Neutral Shift to Neutral when vehicle is standing for prolonged periods with engine running. Engine may be started in this range. Set the parking brake if you must leave the vehicle. NOTE: T owing the vehicle (except as specified under T owing A Disabled V eh[...]

Overdrive Operation The over drive automatic transmission contains an elec- tronically controlled fourth and fifth (if equipped) speed (Overdrive). The transmission will automatically shift from Drive to Overdrive if the following conditions are present: • the transmission selector is in Drive; • the engine coolant has reached normal operating [...]

The transmission will downshift from Over drive to Drive if the accelerator pedal is fully depressed at vehicle speeds above approximately 35 mph (56 km/h). When T o Use “TOW/HAUL” Mode When driving in hilly areas, towing a trailer , carrying a heavy load, etc., and fr equent transmission shifting oc- curs, press the “TOW/HAUL” button. This[...]

light throttle. It engages at higher speeds under heavier acceleration. This may result in a slightly dif ferent feeling or response during normal operation in high gear . When the vehicle speed drops below a calibrated speed, or during acceleration, the clutch automatically and smoothly disengages. The feature is operational in Over- drive and in [...]

Because four-wheel-drive provides improved traction, there is a tendency to exceed safe turning and stopping speeds. Do not go faster than road conditions permit. 4WD Normal Four-Wheel-Drive High Range - Employs inter- axle differ ential. Allows front and rear wheels to rotate at differ ent speeds. All road surfaces. NV 244 Generation II T ransfer [...]

LOCK and 4WD LOW positions on dry hard surfaced roads may cause increased tire wear and damage to the driveline components. The transfer case Neutral (N) position is selected by depressing the recessed button located on the lower left hand corner of the 4WD Control Switch. NOTE: The transfer case Neutral (N) position is to be used for recreational [...]

equal for the shift to take place. Shifting while only the front or r ear wheels are spinning can cause damage to the transfer case. When operating your vehicle in 4WD LOW , the engine speed is appr oximately three times that of the 4WD or 4WD LOCK positions at a given road speed. T ake care not to overspeed the engine and do not exceed 40 km/h (25[...]

For additional information on the appr opriate use of each transfer case mode position see the following informa- tion: 4WD Normal Four-Wheel-Drive High Range - Employs inter- axle differ ential. Allows front and rear wheels to rotate at differ ent speeds. All road surfaces. 4WD LOCK Four-Wheel-Drive Lock (4WD LOCK)- Locks the transfer case inter-a[...]

Shifting Procedure - NV 244 Generation II T ransfer Case NOTE: The 4x4 system will not allow shifts between 4WD/ 4WD LOCK if the rear wheels are spinning (no traction). In this situation a position indicator light will flash and the original position indicator light will remain ON. At this time, reduce speed and stop spinning the wheels to complete[...]

3. While still rolling, rotate the transfer case contr ol switch to the desired position. 4. After the position indicator light has stopped flashing, shift the transmission back into gear . Alternate Procedure 1. Bring the vehicle to complete stop. 2. W ith the key ON and the engine either OFF or RUNNING, shift the transmission into NEUTRAL. 3. Rot[...]

3. Replace tires when tread wear indicators first become visible. 4. Keep tires properly inflated. 5. Maintain sufficient distance between your vehicle and the car in front to avoid a collision in a sudden stop. DRIVING THROUGH W A TER Driving through water more than a few inches deep will requir e extra caution to ensure safety and prevent dam- ag[...]

CAUTION! • Always check the depth of the standing water before driving through it. Never drive through standing water that is deeper than the bottom of the tire rims mounted on the vehicle. • Determine the condition of the road or the path that is under water and if there are any obstacles in the way before driving through the standing water . [...]

P ARKING BRAKE The foot operated parking brake is positioned below the lower left corner of the instrument panel. T o release the parking brake, pull the parking brake release handle. Be sure the parking brake is firmly set when parked and the gear -shift lever is in P ARK position. When parking on a hill you should apply the Parking Brake before p[...]

W ARNING! • Always fully apply the parking brake when leav- ing your vehicle, or vehicle may roll and cause damage or injury . Also be certain to leave an automatic transmission in Park. Failure to do so may cause the vehicle to roll and cause damage or injury . • Be sure the parking brake is fully disengaged before driving, failure to do so ca[...]

surfaces. All vehicle wheels and tires must be the same size and type and tires must be properly inflated to produce accurate signals for the computer . W ARNING! Significant over or under inflation of tires, or mixing sizes of tires or wheels on the vehicle can lead to loss of braking effectiveness. The Anti-Lock Brake System conducts a low-speed [...]

W ARNING! Anti-Lock Brake Systems contain sophisticated elec- tronic equipment. It may be susceptible to interfer- ence caused by improperly installed or high output radio transmitting equipment. This interference can cause possible loss of anti-lock braking capability . Installation of such equipment should be done by qualified professionals. W AR[...]

When you are in a severe braking condition involving use of the Anti-lock Brake system, you will experience some pedal drop as the vehicle comes to a stop. This is the result of the system reverting to the base brake system. Engagement of the Anti-lock Brake System may be accompanied by a pulsing sensation. Y ou may also hear a clicking noise. Thes[...]

W ARNING! Continued operation with reduced power steering assist could pose a safety risk to yourself and others. Service should be obtained as soon as possible. CAUTION! Prolonged operation of the steering system at the end of the steering wheel travel will increase the steering fluid temperature and should be avoided when pos- sible. Damage to th[...]

W ARNING! • Anti-lock system (ABS) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase braking or steering efficiency beyond that afforded by the condition of the vehicle brakes and tires or the traction afforded. • The ABS cannot prevent accidents, including those resulting from excessive speed in turns, [...]

applies optimum pr essure to the brakes in emer gency braking conditions. This can help reduce braking dis- tances. The BAS complements the antilock brake system (ABS). Applying the brakes very quickly results in the best BAS assistance. T o receive the benefit of the system, you must apply continuous braking pr essure during the stopping sequence.[...]

TCS (T raction Control System) This system monitors the amount of wheel spin of each of the driven wheels. If wheel spin is detected, brake pressur e is applied to the slipping wheel(s) and engine power is reduced to provide enhanced acceleration and stability . A featur e of the TCS system functions similar to a limited slip differential and contr[...]

W ARNING! Many factors, such as vehicle loading, road condi- tions and driving conditions, influence the chance that wheel lift or rollover may occur . • ERM can not prevent all wheel lift or rollovers, especially those that involve leaving the roadway or striking objects or other vehicles. Only a safe, attentive, and skillful driver can prevent [...]

• Understeer - when the vehicle is turning less than appropriate for the steering wheel position. ESP/TCS Indicator Light The 9 ESP/TCS Indicator Light 9 starts to flash as soon as the tir es lose traction and the TCS or ESP system becomes active. It will also flash once a swaying trailer is detected and the TSC (T railer Sway Control) system act[...]

4WD/4WD LOCK or 2WD Models ON This is the normal operating mode for ESP in 4WD LOCK and in 2WD vehicles. Whenever the vehicle is started or the transfer case (if equipped) is shifted from 4WD LOW or neutral back to 4WD LOCK, the ESP system will be in this mode. This mode should be used for most all driving situations. ESP should only be turned to ?[...]

mode by pressing the ESP Contr ol Switch. Once the situation r equiring ESP to be switched to the “Partial Of f” mode is overcome, turn ESP on by momentarily depress- ing the “ESP Control Switch”. This may be done with the vehicle is in motion. 4WD LOW Range Partial Of f This is the normal operating mode for ESP in 4WD LOW . Whenever the ve[...]

W ARNING! In the Partial Of f mode, the engine torque reduction and stability features are desensitized. Therefore, the enhanced vehicle stability offered by ESP is unavailable. ESP/BAS W arning Lamp and ESP/TCS Indicator Light The malfunction indicator for the ESP is combined with the BAS indicator . The yellow “ESP/BAS W arning Lamp” and the [...]

TSC (T railer Sway Control) TSC uses sensors in the vehicle to recognize a swaying trailer and will take the appropriate actions to attempt to stop the sway . The system will reduce engine power and apply individual brakes that will counter act the sway of the trailer . TSC will become active automatically once the swaying trailer is recognized. No[...]

TIRE SAFETY INFORMA TION Tire Markings NOTE: • P (Passenger)-Metric tire sizing is based on U.S. design standards. P-Metric tires have the letter “P” molded into the sidewall pr eceding the size designation. Ex- ample: P215/65R15 95H. • European Metric tire sizing is based on European design standards. T ires designed to this standard have [...]

T ire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards 9 ....blank.... 9 = Passenger car tire based on European design standards LT = Light T ruck tire based on U.S. design standards T = T emporary Spare tir e 31 = Overall Diameter in Inches (in) 215 = Section W idth in Millimeters (mm) 65 = Aspect [...]

EXAMPLE: Service Description: 95 = Load Index —A numerical code associated with the maximum load a tire can carry . H = Speed Symbol —A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions. —The maximum speed corresponding to the Speed Symbol should only be a[...]

Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire; however , the date code may only be on one side. T ires with white sidewalls will have the full TIN including date code located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If th[...]

Tire Loading and Tire Pressure T ire Placard Location NOTE: The proper cold tire inflation pressure is listed on either the face of the driver’s door or the driver’s side “B” pillar . T ire and Loading Information Placard This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) the to[...]

Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. Y ou will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tire size, and cold tire inflation pressur es specified on the “T ire and Loading Information” placard and in the “V ehicle Loadi[...]

4. The resulting figure equals the available amount of cargo and luggage load capacity . For example, if “XXX” amount equals 1400 lbs. and there will be five 150 lb. passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs. (since 5 x 150 = 750, and 1400 – 750 = 650 lbs.) 5. Determine the combined weight [...]

312 ST ARTING AND OPERA TING I n f o r m a t i o n P r o v i d e d b y :[...]

W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, af fect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMA TION Tire Pressure Proper tir e inflation pressur e is essential to the safe and satisfactory[...]

2. Economy— Improper inflation pressur es can cause uneven wear patterns to develop across the tire tread. These abnormal wear patterns will r educe tr ead life resulting in a need for earlier tire replacement. Under inflation, also increases tire r olling resistance and results in higher fuel consump- tion. 3. Ride Comfort and V ehicle Stability[...]

check tire pressure. Do not make a visual judgement when determining pr oper inflation. Radial tir es may look properly inflated even when they are under inflated. CAUTION! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap (if equipped). This will prevent moisture and dirt from entering the valve stem, which cou[...]

T ire Pressures for High Speed Operation The manufacturer advocates driving at safe speeds within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high speeds, maintaining correct tire inflation pressure is very important. Increased tire pressure and reduced vehicle loading may be required for high-[...]

Compact Spare Tire — If Equipped The compact spare is for temporary emer gency use with radial tir es. It is engineered to be used on your style vehicle only . Since this tire has limited tread life, the original tire should be repaired (or replaced) and rein- stalled at the first opportunity . W ARNING! T emporary use spare tires are for emergen[...]

original equipped tir e on the front or rear axle of your vehicle, but it is not. Installation of this limited use spare tire affects vehicle handling. Since it is not the same tir e, replace (or repair) the original tire and reinstall on the vehicle at the first opportunity . W ARNING! The limited use spare tires are for emergency use only . Insta[...]

T read Wear Indicators T read wear indicators are in the original equipment tir es to help you in determining when your tires should be replaced. These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tr ead depth becomes 1/16 inch (2 mm). When the tread is worn to the tread wear indicators, the tire sh[...]

W ARNING! T ires and spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. Y ou could lose control and have an accident resulting in serious injury or death. Keep dismounted tires in a cool, dry place with as little exposure to light as possible. Protect t[...]

W ARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change suspen- sion dimensions and performance characteristics, resulting in changes to steering, handling, and brak- ing of your vehicle. This can cause unpredictable handling and stress to steering[...]

Improper alignment will not cause vehicle vibration. V ibration may be a result of tire and wheel out-of- balance. Proper balancing will reduce vibration and avoid tire cupping and spotty wear . SUPPLEMENT AL TIRE PRESSURE INFORMA TION — IF EQUIPPED A light load vehicle condition is defined as two passen- gers {150 lbs (68 kg) each} plus 200 lbs [...]

These cautions apply to all chain traction devices, includ- ing link and cable (radial) chains. T ire chain use is permitted only on the r ear tir es of your truck. NOTE: The use of class “S” chains is permitted on your vehicle with P245/70R17 tires. CAUTION! Do not use tire chains on 4x4 trucks equipped with tires other than P245/70R17 tires. [...]

TIRE ROT A TION RECOMMENDA TIONS T ires on the front and rear axles of vehicles operate at differ ent loads and perform different steering, driving, and braking functions. For these reasons, they wear at unequal rates and tend to develop irregular wear pat- terns. These effects can be reduced by timely rotation of tires. The benefits of rotation ar[...]

TIRE PRESSURE MONITOR SYSTEM (TPMS) — IF EQUIPPED The T ire Pressure Monitoring System (TPMS) will warn the driver of a low tire pressur e based on the vehicle recommended cold placard pressure (the placard is lo- cated on the drivers side B-pillar). The tire pressure will vary with temperature by about 1 psi (6.9 kPa) for every 12°F (6.5°C). T[...]

For example, your vehicle has a recommended cold (parked for more than 3 hours) placard of 33 (227 kPa). If the ambient temperatur e is 68°F (20°C) and the measured tire pressure is 28 psi (193 kPa), a temperature drop to 20°F (-7°C) will decrease the tire pressur e to approxi- mately 24 psi (165 kPa). This tire pr essure is sufficiently low en[...]

NOTE: • The TPMS is not intended to replace normal tire care and maintenance, or to provide warning of a tire failure or condition. • The TPMS should not be used as a tire pressure gauge while adjusting your tire pressure. • Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure. Under-inflatio[...]

• T ire Pressur e Monitoring T elltale Lamp The T ir e Pressure Monitoring T elltale Lamp will illuminate in the instrument cluster , and an au- dible chime will be activated when one or more of the four active road tire pressur es are low . Should this occur , you should stop as soon as possible, check the inflation pressur e of each tire on you[...]

limit, upon the next ignition key cycle, a chime will sound and the TPM T elltale Light will still turn ON due to the low tire. 3. However , after driving the vehicle for up to 10 min- utes above 15 mph (25 km/h), the TPM T elltale Light will flash on and off for 75 seconds and then remain on solid. 4. For each subsequent ignition key cycle, a chim[...]

• Y ellow T ir e Pressur e Monitoring T elltale Light. T ire Pressure Monitoring Low Pressure W arnings The T ir e Pressure Monitoring T elltale Lamp will illumi- nate in the instrument cluster , and an audible chime will be activated when one or mor e of the four active road tire pressur es are low . In addition, the Electronic V ehicle Informat[...]

affects radio wave signals. 3) Lots of snow or ice around the wheels or wheel housings. 4) Using tire chains on the vehicle. 5) Using wheels/tires not equipped with TPM sensors. NOTE: Y our vehicle is equipped with a non-matching full size spare wheel and tire assembly . 1. This spare tire does not have a tire pressure monitor- ing sensor . Therefo[...]

The vehicle may need to be driven for up to 10 minutes above 15 mph (25 km/h) in or der for the TPMS to receive this information. General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device[...]

premium gasoline will not provide a benefit over high quality regular and mid-grade gasolines, and in some circumstances may result in poorer performance. Light spark knock at low engine speeds is not harmful to your engine. However , continued heavy spark knock at high speeds can cause damage and immediate service is requir ed. Poor quality gasoli[...]

CAUTION! DO NOT use gasoline containing Methanol or E85 Ethanol. Use of these blends may result in starting and driveability problems and may damage critical fuel system components. NOTE: 4.7L Engine — If Equipped , is now rated for E85 Ethanol use. Only vehicles with the E-85 fuel filler door label can operate on E-85. For more information, refe[...]

Materials Added T o Fuel All gasolines sold in the United States are required to contain effective detergent additives. Use of additional detergents or other additives is not needed under normal conditions and would result in unnecessary cost. There- fore, you should not have to add anything to the fuel. Fuel System Cautions CAUTION! Follow these g[...]

NOTE: Intentional tampering with emissions control sys- tems can r esult in civil penalties being assessed against you. Carbon Monoxide W arnings W ARNING! Carbon monoxide (CO) in exhaust gases is deadly . Follow the precautions below to prevent carbon monoxide poisoning: • Do not inhale exhaust gases. They contain carbon monox- ide, a colorless [...]

CAUTION! A poorly fitting gas cap may cause the Malfunction Indicator Light to turn on. CAUTION! T o avoid fuel spillage and overfilling, do not “top off” the fuel tank after filling. NOTE: When the fuel nozzle “clicks” or shuts off, the fuel tank is full. W ARNING! • Never have any smoking materials lit in or near the vehicle when the ga[...]

W ARNING! A fire may result if gasoline is pumped into a portable container that is inside of a vehicle. Y ou could be burned. Always place gas containers on the ground while filling. Loose Fuel Filler Cap (Gas Cap) Message After fuel is added, the vehicle diagnostic system can determine if the fuel filler cap is loose, impr operly installed, or da[...]

FLEXIBLE FUEL — IF EQUIPPED E-85 General Information The information in this section is for Flexible Fuel ve- hicles only . These vehicles can be identified by the unique fuel filler door label that states Ethanol (E-85) or Un- leaded Gasoline Only . This section only covers those subjects that are unique to these vehicles. Please refer to the ot[...]

CAUTION! Only vehicles with the E-85 fuel filler cap (gas cap) can operate on E-85. ETHANOL FUEL (E-85) E-85 is a mixtur e of appr oximately 85% fuel ethanol and 15% unleaded gasoline. W ARNING! Ethanol vapors are extremely flammable and could cause serious personal injury . Never have any smok- ing materials lit in or near the vehicle when remov- [...]

For best results, a refueling pattern that alternates be- tween E-85 and unleaded gasoline should be avoided. When you do switch fuels, it is recommended that • you do not switch when the fuel gauge indicates less than 1/4 full • you do not add less than 5 gallons when refueling • you operate the vehicle immediately after r efueling for a per[...]

increase in the time it takes for your engine to start, and a deterioration in drivability (sags and/or hesitations) until the engine is fully warmed up. Cruising Range Because E-85 fuel contains less energy per gallon than gasoline, you will experience an increase in fuel con- sumption. Y ou can expect your miles per gallon (mpg) and your driving [...]

VEHICLE LOADING Certification Label As required by National Highway T raffic Safety Admin- istration Regulations, your vehicle has a certification label affixed to the driver’s side door . This label contains the month and year of manufacture, Gross V ehicle W eight Rating (GVWR), Gross Axle W eight Rating (GA WR) front and rear , and V ehicle Id[...]

Gross Axle W eight Rating (GA WR) The GA WR is the maximum permissible load on the front and rear axles. The load must be distributed in the cargo area so that the GA WR of each axle is not exceeded. Each axle GA WR is determined by the component in the system with the lowest load carrying capacity (axle, springs, tires, or wheels). Heavier axles o[...]

then be determined separately to be sure that the load is properly distributed over fr ont and r ear axle. W eighing the vehicle may show that the GA WR of either the front or rear axles has been exceeded but the total load is within the specified GVWR. If so, weight must be shifted from front to rear or rear to front as appropriate until the speci[...]

after the vehicle has been weighed both in its ( curb weight ( condition, and in its ( loaded and ready for operation ( condition. Gross V ehicle W eight Rating (GVWR) 6500 LBS. TRAILER TOWING In this section you will find safety tips and information on limits to the type of towing you can reasonably do with your vehicle. Before towing a trailer ca[...]

Gross T railer W eight (GTW) The gr oss trailer weight (GTW) is the weight of the trailer plus the weight of all cargo, consumables and equipment (permanent or temporary) loaded in or on the trailer in its 9 loaded and ready for operation 9 condition. The recom- mended way to measure GTW is to put your fully loaded trailer on a vehicle scale. The e[...]

Frontal Area The maximum height and maximum width of the front of a trailer . TSC (T railer Sway Control) – If Equipped • T railer Sway Control – Electronic TSC uses sensors in the vehicle to recognize a swaying trailer and will take the appropriate actions to attempt to stop the sway . The system will reduce engine power and apply individual[...]

W eight-Distributing Hitch A weight-distributing system works by applying lever- age through spring (load) bars. They ar e typically used for heavier loads, to distribute trailer tongue weight to the tow vehicle’s front axle and the trailer axle(s). When used in accordance with the manufacturers’ directions, it provides for a more level ride, o[...]

W eight Distributing Hitch System Improper Adjustment of W eight Distributing System 350 ST ARTING AND OPERA TING I n f o r m a t i o n P r o v i d e d b y :[...]

Fifth-Wheel Hitch A special high platform with a coupling that mounts over the rear axle of the tow vehicle in the truck bed. Connects a vehicle and fifth-wheel trailer with a coupling king pin. Gooseneck Hitch The gooseneck hitch employs a pivoted coupling arm which attaches to a ball mounted in the bed of a pickup truck. The coupling arm connects[...]

T railer T owing Weights (Maximum T railer Weight Ratings) NOTE: For additional trailer towing information (maxi- mum trailer weight ratings) refer to the following website addresses: • http:// www .dodge.com/towing . • http:// www .dodge.ca (Canada). T railer and T ongue Weight Always load a trailer with 60% to 65% of the weight in the front o[...]

• The weight of any other type of cargo or equipment put in or on your vehicle. • The weight of the driver and all passengers. NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options, or dealer -installed options, must be consider ed as part of the total load on your[...]

W ARNING! Improper towing can lead to an injury accident. Follow these guidelines to make your trailer towing as safe as possible: Make certain that the load is secured in the trailer and will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be dif ficult for the driver to control. Y o[...]

2. GTW 3. GA WR 4. T ongue weight rating for the trailer hitch utilized (This requirement may limit the ability to always achieve the 10% to 15% range of tongue weight as a percentage of total trailer weight). T owing Requirements — T ires − Do not attempt to tow a trailer while using a compact spare tire. − Proper tire inflation pressur es a[...]

actuated brakes. When towing a trailer equipped with a hydraulic surge actuated brake system, an electronic brake controller is not required. − T railer brakes are recommended for trailers over 1,000 lbs (454 kg) and requir ed for trailers in excess of 2,000 lbs (907 kg). CAUTION! If the trailer weighs more than 1,000 lbs (454 kg) loaded, it shou[...]

NOTE: Do not cut or splice wiring into the vehicles wiring harness. The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector . Refer to the following illustrations. T owing Tips Before setting out on a trip, practice turning, stopping and backing the trailer in an area away from heavy traffic. [...]

If using a manual transmission vehicle for trailer towing, all starts must be in FIRST gear to avoid excessive clutch slippage. T owing T ips — Automatic T ransmission The “D” range can be selected when towing. However , if frequent shifting occurs while in this range, the “TOW HAUL” feature should be selected. NOTE: Using the “TOW HAUL[...]

T owing T ips — Cooling System T o r educe potential for engine and transmission over- heating, take the following actions: − City Driving When stopped for short periods of time, put transmission in neutral and increase engine idle speed. − Highway Driving Reduce speed. − Air Conditioning T urn off temporarily . − refer to Cooling System [...]

CAUTION! Using this vehicle for snowplow applications can cause damage to the vehicle. W ARNING! Attaching a snowplow to this vehicle could adversely affect performance of the airbag system in an acci- dent. Do not expect that the airbag will perform as described earlier in this manual RECREA TIONAL TOWING (BEHIND MOTORHOME, ETC.) Recreational T ow[...]

W ARNING! Y ou or others could be injured if you leave the vehicle unattended with the transfer case in the Neutral (N) position without first fully engaging the parking brake. The transfer case Neutral (N) position disengages both the front and rear driveshafts from the powertrain and will allow the vehicle to move despite the transmission positio[...]

3. T urn the ignition key to the ON position without starting the engine. 4. Depress brake pedal. 5. Shift automatic transmission to Neutral (N). 6. Using the point of a ballpoint pen or similar object, depress the recessed transfer case Neutral (N) button for 4 seconds. 7. After shift is completed and the Neutral (N) light comes on release Neutral[...]

CAUTION! Damage to the transmission may occur if the trans- mission is shifted into Park (P) with the transfer case in Neutral (N) and the engine RUNNING. With the transfer case in Neutral (N) ensure that the engine is OFF prior to shifting the transmission into Park (P) Shifting OUT of Neutral (N) Use the following procedure to prepare your vehicl[...]

the 1 second time, then all of the position indicator lights will flash continuously until all requir ements are met or until the Neutral (N) button is released. NOTE: The ignition key must be ON for a shift to take place and for the position indicator lights to be operable. If the key is not On, the shift will not take place and no position indica[...]

WHA T T O DO IN EMERGENCIES CONTENTS m Hazard W arning Flasher .................. 3 6 6 m Jacking And T ire Changing ................ 3 6 7 ▫ Jack Location ........................ 3 6 7 m Jacking Instructions ..................... 3 6 8 ▫ Removing The Spare T ire ................ 3 6 8 ▫ T ire Changing Procedure ................ 3 7 0 m Jump[...]

HAZARD W ARNING FLASHER The flasher switch is on the top of the steering column, just behind the steering wheel. Press the flasher switch and all front and rear dir ectional signals will flash intermittently . Press the switch a second time to turn off the emergency flashers. This is an emergency warning system and should not be used when the vehic[...]

JACKING AND TIRE CHANGING W ARNING! • Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. Y ou could be crushed. Never put any part of your body under a vehicle that is on a jack. Never start or run the engine while the vehicle is on a jack. If you need to get under a raised vehicle, take it to a ser[...]

JACKING INSTRUCTIONS Removing The Spare Tire The spare tire on your vehicle is located underneath the vehicle in the rear . 368 WHA T TO DO IN EMERGENCIES I n f o r m a t i o n P r o v i d e d b y :[...]

Remove the spar e tire befor e attempting to jack the tr uck. 1. Remove the rubber plug fr om the floor in the cargo area. 2. Engage the jack wrench extension to the spar e tire winch through the hole in the floor . 3. T urn the wrench counterclockwise to lower the spare tire. Continue to turn the wrench until the spare tire can be pulled out from [...]

Tire Changing Procedure W ARNING! Getting under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. Y ou could be crushed. Never get any part of your body under a vehicle that is on a jack. Never start or run the engine while the vehicle is on a jack. If you need to get under a raised vehicle, take it to a service[...]

• Block both the front and rear of the wheel diagonally oppo- site the jacking position. For example, if the right front wheel is being changed, block the left rear wheel. • Passengers should not remain in the vehicle when the vehicle is being jacked. Instructions 1. Remove the spare wheel, jack, and tools from storage. 2. Using the wheel wrenc[...]

When changing a r ear wheel, assemble the jack drive tube to the jack and connect the drive tube to the extension tube. Place the jack under the axle as close to the tire as posssible with the drive tubes extending to the rear . Connect the jack tube extension and wheel wrench. Before raising the wheel off the ground, make sure that the jack will n[...]

W ARNING! Raising the vehicle higher than necessary can make the vehicle unstable and cause an accident. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. 5. Remove the wheel nuts and pull the wheel off. Install the spare wheel and wheel nuts with the cone shaped end of the nuts toward the wheel.[...]

W ARNING! Carefully follow these tire changing warnings to help prevent personal injury or damage to your vehicle: • Always park on a firm, level surface as far from the edge of the roadway as possible before raising the vehicle. • Block the wheel diagonally opposite the wheel to be raised. • Apply the parking brake firmly before jacking. •[...]

JUMP ST ARTING PROCEDURES W ARNING! • Battery fluid is a corrosive acid solution; do not allow battery fluid to contact eyes, skin or cloth- ing. Don’t lean over battery when attaching clamps or allow the clamps to touch each other . If acid splashes in eyes or on skin, flush the contami- nated area immediately with large quantities of water . [...]

4. Connect one end of a jumper cable to the positive terminal of the booster battery . Connect the other end of the same cable to the positive terminal of the discharged battery . W ARNING! Do not permit vehicles to touch each other as this could establish a ground connection and personal injury could result. 5. Connect the other cable, first to th[...]

W ARNING! Any procedure other than above could result in: 1. Personal injury caused by electrolyte squirting out the battery vent; 2. Personal injury or property damage due to battery explosion; 3. Damage to charging system of booster vehicle or of immobilized vehicle. FREEING A STUCK VEHICLE If vehicle becomes stuck in snow , sand, or mud, it can [...]

W ARNING! Chains are not recommended for freeing a stuck vehicle. Chains may break, causing serious injury or death. W ARNING! Stand clear of vehicles when pulling with tow hooks. T ow straps and chains may break, causing serious injury . CAUTION! T ow hooks are for emergency use only , to rescue a vehicle stranded off road. Do not use tow hooks fo[...]

Four-Wheel Drive V ehicles The manufacturer recommends towing with all wheels OFF the ground. Acceptable methods are to tow the vehicle on a flatbed or with one end of the vehicle raised and the opposite end on a towing dolly . T wo-Wheel Drive V ehicles Provided that the transmission is operable, tow with the transmission in Neutral and the igniti[...]

I n f o r m a t i o n P r o v i d e d b y :[...]

MAINT AINING YOUR VEHICLE CONTENTS m Engine Compartment 3.7L V6 .............. 3 8 4 m Engine Compartment 4.7L V -8 .............. 3 8 5 m Engine Compartment 5.7L HEMI V -8 ......... 3 8 6 m Onboard Diagnostic System — OBD II ........ 3 8 7 ▫ Loose Fuel Filler Cap Message ............ 3 8 8 m Emissions Inspection And Maintenance Programs ......[...]

▫ Power Steering — Fluid Check ............ 3 9 9 ▫ Air Conditioner Maintenance ............. 3 9 9 ▫ Front Suspension Ball Joints .............. 4 0 0 ▫ Drive Shaft Constant V elocity Joints ........ 4 0 1 ▫ Body Lubrication ..................... 4 0 1 ▫ W indshield W iper Blades ................ 4 0 1 ▫ W indshield And Rear W indo[...]

▫ Center High-Mounted Stoplight ........... 4 3 7 ▫ Fog Lights .......................... 4 3 8 m Fluids And Capacities ................... 4 3 9 m Fluids, Lubricants And Genuine Parts ........ 4 4 0 ▫ Engine ............................. 4 4 0 ▫ Chassis ............................ 4 4 1 MAINT AINING YOUR VEHICLE 383 7 I n f o r m a t i o [...]

ENGINE COMP ARTMENT 3.7L V6 384 MAINT AINING YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :[...]

ENGINE COMP ARTMENT 4.7L V -8 MAINT AINING YOUR VEHICLE 385 7 I n f o r m a t i o n P r o v i d e d b y :[...]

ENGINE COMP ARTMENT 5.7L HEMI V -8 386 MAINT AINING YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :[...]

ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission contr ol systems. When these systems are operating properly , your vehicle will provide excellent performance and fuel economy , as wel[...]

Loose Fuel Filler Cap Message After fuel is added, the vehicle diagnostic system can determine if the fuel filler cap is possibly loose, impr op- erly installed, or damaged. A loose fuel filler cap message will be displayed in the instrument cluster . T ighten the gas cap until a 9 clicking 9 sound is heard. This is an indication that the gas cap i[...]

Y our vehicle has a simple ignition key actuated test which you can use prior to going to the test station. T o check if your vehicle’s OBD system is r eady , you must do the following: 1. Insert your ignition key into the ignition switch. 2. T urn the ignition to the ON position, but do not crank or start the engine. If you crank or start the en[...]

vehicle serviced befor e going to the I/M station. The I/M station can fail your vehicle because the MIL symbol is on with the engine running. REPLACEMENT P ARTS Use of genuine Mopar t parts for normal/scheduled maintenance and repairs is highly recommended to in- sure the designed performance. Damage or failures caused by the use of non-Mopar t pa[...]

MAINTENANCE PROCEDURES The pages that follow contain the required maintenance services determined by the engineers who designed your vehicle. Besides the maintenance items for which there ar e fixed maintenance intervals, there are other items that should operate satisfactorily without periodic maintenance. However , if a malfunction of these items[...]

CAUTION! Overfilling or underfilling the crankcase will cause oil aeration or loss of oil pressure. This could damage your engine. Change Engine Oil Follow the Maintenance Schedule for recommended en- gine oil and filter change intervals. NOTE: Under no circumstances should oil change in- tervals exceed 6,000 miles (10 000 km) or 6 months whichever[...]

Engine Oil Selection For best performance and maximum protection under all types of operating conditions, the manufactur e only recommends engine oils that are API certified and meet the r equirements of DaimlerChrysler Material Standard MS-6395. American Petroleum Institute (API) Engine Oil Identification Symbol This symbol means that the oil has [...]

Synthetic Engine Oils Y ou may use synthetic engine oils pr ovided the r ecom- mended oil quality requir ements are met, and the recom- mended maintenance intervals for oil and filter changes are followed. Materials Added to Engine Oils The manufacture strongly recommends against the addi- tion of any additives (other than leak detection dyes) to t[...]

belt tension can cause belt slippage and failure. Belts should be inspected for evidence of cuts, cracks, glazing, or frayed cords and replaced if there is indication of damage which could result in belt failure. Low generator belt tension can cause battery failur e. Also check belt routing to make sure there is no interference between the belts an[...]

Engine Fuel Filter A plugged fuel filter can cause stalling, limit the speed at which a vehicle can be driven or cause har d starting. Should an excessive amount of dirt accumulate in the fuel tank, frequent filter replacement may be necessary . Catalytic Converter The catalytic converter requir es the use of unleaded fuel only . Leaded gasoline wi[...]

W ARNING! A hot exhaust system can start a fire if you park over materials that can burn. Such materials might be grass or leaves coming into contact with your exhaust system. Do not park or operate your vehicle in areas where your exhaust system can contact anything that can burn. In unusual situations involving grossly malfunctioning engine opera[...]

W ARNING! • Battery fluid is a corrosive acid solution and can burn or even blind you. Don’t allow battery fluid to contact your eyes, skin or clothing. Don’t lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area imme- diately with large amounts of water . • Battery gas is flammable and explosive. Ke[...]

Power Steering — Fluid Check Checking the power steering fluid level at a defined service interval is not required. The fluid should only be checked if a leak is suspected, abnormal noises are apparent, and/or the system is not functioning as antici- pated. Coordinate inspection efforts through a certified DaimlerChrysler Dealership. 9 W ARNING! [...]

W ARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air condi- tioning system. Some unapproved refrigerants are flammable and can explode, injuring you. Other unapproved refrigerants or lubricants can cause the system to fail, requiring costly repairs. Refer to Section 3 of the W arranty Information b[...]

Drive Shaft Constant V elocity Joints All four wheel drive models are equipped with four constant velocity joints. Periodic lubrication of these joints is not required. However , the joint boot should be inspected for external leakage or damage periodically . If external leakage or damage is evident, the joint boot and grease should be replaced imm[...]

A void using the wiper blades to remove frost or ice from the windshield. Keep the blade rubber out of contact with petroleum products such as engine oil, gasoline, etc. Windshield and Rear Window Washers The fluid reservoir for the windshield washers and the rear window washer is shared. The fluid reservoir is located in the engine compartment, be[...]

damaged, have a competent mechanic inspect the com- plete exhaust system and adjacent body areas for broken, damaged, deteriorated, or mispositioned parts. Open seams or loose connections could permit exhaust fumes to seep into the passenger compartment. In addition, inspect the exhaust system each time the vehicle is raised for lubrication or oil [...]

clean by gently spraying water from a gar den hose vertically down the face of the condenser and radiator . Check the coolant recovery bottle tubing for brittle rub- ber , cracking, tears, cuts and tightness of the connection at the bottle and radiator . Inspect the entir e system for leaks. W ith the engine at normal operating temperature (but not[...]

CAUTION! • Mixing of coolants other than specified HOA T engine coolants may result in engine damage and may decrease corrosion protection. If a non-HOA T coolant is introduced into the cooling system in an emergency , it should be replaced with the speci- fied coolant as soon as possible. • Do not use plain water alone or alcohol base engine c[...]

• Use only high purity water such as distilled or deion- ized water when mixing the water/engine coolant solution. The use of lower quality water will r educe the amount of corr osion protection in the engine cooling system. Please note that it is the owner’s responsibility to main- tain the proper level of protection against freezing ac- cordi[...]

Disposal of Used Engine Coolant Used ethylene glycol based engine coolant is a regulated substance r equiring proper disposal. Check with your local authorities to determine the disposal rules for your community . T o pr event ingestion by animals or children do not stor e ethylene glycol based engine coolant in open containers or allow it to r ema[...]

• Do not overfill the coolant recovery bottle. • Check coolant freeze point in the radiator and in the coolant recovery bottle. If antifreeze needs to be added, contents of coolant recovery bottle must also be protected against freezing. • If fr equent coolant additions are required, or if the level in the coolant recovery bottle does not dr [...]

Emission Related Components Fuel System Hoses And V apor/V acuum Harnesses When the vehicle is serviced for scheduled maintenance, inspect surface of hoses and nylon tubing for evidence of heat and mechanical damage. Hard and brittle rubber , cracking, checking, tears, cuts, abrasions, and excessive swelling suggest deterioration of the rubber . Pa[...]

attempt to clean the PCV valve! Check ventilating hose for indication of damage or plugging with deposits. Replace if necessary . Brake System Power Disc Brakes (Front and Rear) Disc brakes do not r equire adjustment; however , several hard stops during the break-in period are recommended to seat the linings and wear off any foreign material. Brake[...]

Use only brake fluid that has been in a tightly closed container to avoid contamination from foreign matter or moisture. CAUTION! Do not allow a petroleum-base fluid to contaminate the brake fluid. Seal damage may result. Brake Hoses Inspection should be performed whenever the brake system is serviced or at intervals specified. Inspect hy- draulic [...]

least 15 miles (24 km) of driving. At normal operating temperature the fluid cannot be held comfortably be- tween the fingertips. T o check the automatic transmission fluid level properly , the following procedur e must be used: 1. Operate the engine at idle speed and normal operating temperature. 2. The vehicle must be on level ground. 3. Fully ap[...]

CAUTION! Be aware that if the fluid temperature is below 50°F (10°C) it may not register on the dipstick. Do not add fluid until the temperature is elevated enough to produce an accurate reading. 7. Check for leaks. Release parking brake. T o prevent dirt and water from entering the transmission after checking or replenishing fluid, make certain [...]

CAUTION! Using a transmission fluid other than the manufac- turers recommended fluid may cause deterioration in transmission shift quality and/or torque converter shudder . Using a transmission fluid other than the manufacturers recommended fluid will result in more frequent fluid and filter changes. Refer to Fluids, Lubricants and Genuine Parts fo[...]

NOTE: The presence of water in the gear lubricant will result in corrosion and possible failure of differential components. Operation of the vehicle in water , as may be encountered in some off-highway types of service, will requir e draining and refilling the axle to avoid damage. Rear Axle Rear Axle fluid levels should be 7/8 in. (22mm) +/- 1/4 i[...]

• Insects, tree sap and tar . • Salt in the air near seacoast localities. • Atmospheric fallout/industrial pollutants. W ashing • W ash your vehicle regularly . Always wash your ve- hicle in the shade using a mild car wash soap, and rinse the panels completely with clear water . • If insects, tar or other similar deposits have accumu- lat[...]

• If your vehicle is damaged due to an accident or similar cause which destroys the paint and pr otective coating have your vehicle r epaired as soon as possible. The cost of such repairs is considered the responsibil- ity of the owner . • If you carry special cargo such as chemicals, fertilizers, de-icer salt, etc., be sure that such materials[...]

• For grease stains, apply Mopar t Multi-purpose cleaner to a clean, damp cloth and remove stain. Use a fresh, damp towel to remove soap residue. • Do not use any solvents or protectants on Y es Essen- tials products. Interior Care Use Mopar t Fabric Cleaner to clean fabric upholstery and carpeting. Use Mopar t V inyl Cleaner to clean vinyl uph[...]

T o minimize the possibility of scratching the lenses and reducing light output, avoid wiping with a dry cloth. T o remove road dirt, wash with a mild soap solution fol- lowed by rinsing. Do not use abrasive cleaning components, solvents, steel wool or other aggressive material to clean the lenses. Glass Surfaces All glass surfaces should be cleane[...]

Replace the belts if they appear frayed or worn or if the buckles do not work properly . FUSE BLOCK CAUTION! When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating. The use of a fuse with a rating other than indicated may result in a dangerous electrical system overload. If a properly rated fuse continues[...]

Fuses (Interior) The fuse block contains blade-type mini-fuses, relays, and circuit breakers for high-current circuits. It is located in the left kick panel. It is accessible thr ough a snap-in cover . MAINT AINING YOUR VEHICLE 421 7 I n f o r m a t i o n P r o v i d e d b y :[...]

Cavity Mini Fuse/Color Description F1 15 Amp Blue Instrument Clus- ter Battery Feed F 2 10 Amp Red Spare F3 10 Amp Red Ignition Run/ Start for Next Generation Con- troller (NGC), Integrated Power Module (IPM), AC Relay and Fuel Pump Relay F4 10 Amp Red Door Node and Non-Memory Power Mirror Switch Battery Feed Cavity Mini Fuse/Color Description F5 ([...]

Cavity Mini Fuse/Color Description F10 10 Amp Red Spar e F1 1 10 Amp Red Heated Mirrors F12 20 Amp Y ellow Cluster Battery Feed F13 10 Amp Red Ignition Run HV AC Module/ Heated Rear Glass (EBL) Re- lay F14 10 Amp Red ABS Module Ig- nition Run F15 15 Amp Blue Battery Feed Blue T ooth, Compass/T rip Computer (CMTC), Sentry Key Diagnostics Cavity Mini[...]

Fuses (Power Distribution Center) Y our vehicle is equipped with an electrical power distri- bution center located in the left side of the engine compartment. This center contains cartridge fuses, mini fuses and relays. A description of each fuse and component may be stamped on the inside cover otherwise the cavity number of each fuse is stamped on[...]

Cavity Cartridge Fuse / Relay Mini Fuse Description 7 40 Amp Green Blower Motor Relay Feed 8 40 Amp Green JB Feed Acc Delay 9 Spare 10 30 Amp Pink ASD 1 1 40 Amp Green Power Liftgate ( If Equipped) 12 40 Amp Green JB Feed / Heated Rear Glass (EBL)/ T Case Brake 13 30 Amp Pink JB Feed RR 14 40 Amp Green ESP Pump Cavity Cartridge Fuse / Relay Mini Fu[...]

Cavity Cartridge Fuse / Relay Mini Fuse Description 23 20 Amp Y ellow T railer T ow 24 15 Amp Blue A/C Clutch 25 15 Amp Blue Stop Lamp Switch 26 Spare 27 20 Amp Y ellow Run/Start Relay Feed 28 Spare 29 Relay Run Start 30 Relay Run Remote 31 Spare Cavity Cartridge Fuse / Relay Mini Fuse Description 32 Relay Starter 33 Relay Electronic Auto- matic T [...]

Fuses (Integrated Power Module) An integrated Power Module is located in the left side of the engine compartment. This center contains cartridge fuses, mini fuses and relays. A description of each fuse and component may be stamped on the inside cover otherwise the cavity number of each fuse is stamped on the inside cover that corresponds to the fol[...]

Cavity Cartridge Fuse / Relay Mini Fuse Description 10 10 Amp Red Rt Park Lamps 1 1 Relay Radiator Fan Hi Rly 12 20 Amp Y ellow Front Control Mod- ule (FCM) Batt #4 13 20 Amp Y ellow Front Control Mod- ule (FCM) Batt #2 14 20 Amp Y ellow Adjustable Pedal 15 20 Amp Y ellow Ft Fog Lamps 16 20 Amp Y ellow Horn 17 20 Amp Y ellow Rear W iper Cavity Cart[...]

Cavity Cartridge Fuse / Relay Mini Fuse Description 26 Relay Adjustable Pedal Rly 27 30 Amp Green Ignition Off Draw (IOD) #1 28 30 Amp Green Ignition Off Draw (IOD) #2 29 Spare 30 Spare VEHICLE STORAGE If you are storing your vehicle for more than 21 days, we recommend that you take the following steps to mini- mize the drain on your vehicle’s ba[...]

REPLACEMENT LIGHT BULBS LIGHT BULBS — Interior Bulb No. Dome Light .................... N o t S e r viceable Liftgate Lamp ........................... 5 6 7 Overhead Console Lights ........... N o t S e r viceable Reading Light ................... N o t S e r viceable V isor V anity Lights ............... N o t S e r viceable LIGHT BULBS — Exte[...]

2. Remove one nut that attaches the headlight to the inner fender panel. Access to the nut is possible by opening the fender panel access door which is located in the wheel liner . 3. Grasp the headlight and pull firmly to disengage the headlight from the fender panel. 4. While firmly holding the headlight in your hands disconnect all connectors by[...]

Rear Side Marker , T ail Lights, T urn Signals And Backup Lights — Replacement 1. Remove the two push-pins from the tail light housing. 432 MAINT AINING YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :[...]

2. Rotate the light to the outboard side of the vehicle and remove. 3. Unlock and remove electrical connector . MAINT AINING YOUR VEHICLE 433 7 I n f o r m a t i o n P r o v i d e d b y :[...]

4. Remove the three screws holding the bulb strip to the back of the tail lamp. 5. Remove the bulb strip from the tail light lens. 434 MAINT AINING YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :[...]

6. Remove bulbs from bulb strip by pulling the bulb straight out. MAINT AINING YOUR VEHICLE 435 7 I n f o r m a t i o n P r o v i d e d b y :[...]

License Lights 1. Remove the two screws securing the lens to the liftgate. 2. Rotate the socket 1/4 turn counterclockwise. 3. Pull bulb from socket. 436 MAINT AINING YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :[...]

Center High-Mounted Stoplight 1. Remove two screws securing stoplight housing assem- bly to the liftgate. 2. T urn socket 1/4 counterclockwise and free from hous- ing. 3. Pull bulb straight from socket to remove. MAINT AINING YOUR VEHICLE 437 7 I n f o r m a t i o n P r o v i d e d b y :[...]

Fog Lights T o replace the left foglamp bulb: 1. Remove the three wheel liner screws. 2. Remove the remove the far left air dam screw at the bottom of the fascia. 3. Peel back the liner and access the foglamp. 4. Rotate the socket and connector 1/4 turn counter- clockwise and pull straight reward to disengage fr om the lamp. 5. Remove the bulb from[...]

FLUIDS AND CAP ACITIES U.S. Metric Fuel 3.7L/4.7L, 87 Octane 27 Gal. 102L 5.7L, 89 Octane 27 Gal 102L Engine Oil (with filter) 3.7L, SAE 5W -20, API Certified 5 Qt. 4.7L 4.7L, SAE 5W -20, API Certified 6 Qt. 5.7L 5.7L, SAE 5W -20, API Certified 7 Qt. 6.6L Cooling System (includes 2.1 Qts./2L for coolant bottle 3.7L without Rear Heat (Mopar t Antifr[...]

FLUIDS, LUBRICANTS AND GENUINE P ARTS Engine Component Fluids, Lubricants and Genuine Parts Engine Coolant Mopar t Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hybrid Or- ganic Additive T echnology) 3.7/4.7L/5.7L Engine Oil Use API Certified SAE 5W -20 Engine Oil, meeting the requirements of DaimlerChrysler Material Standard MS-6395. Refe[...]

Chassis Component Fluids, Lubricants and Genuine Parts. Automatic T ransmission Mopar t A TF+4, Automatic T ransmission Fluid. T ransfer Case Mopar t A TF+4, Automatic T ransmission Fluid. Front Axle SAE 75W -90 Multipurpose T ype, GL-5 Gear Lubricant or equivalent. Rear Axle SAE 75W -140 Synthetic Gear Lubricant or equivalent. Brake Master Cylinde[...]

I n f o r m a t i o n P r o v i d e d b y :[...]

MAINTENANCE SCHEDULES CONTENTS m Emission Control System Maintenance ........ 4 4 4 m Maintenance Schedule ................... 4 4 4 ▫ Required Maintenance Intervals ........... 4 4 6 8 M A I N T E N A N C E S C H E D U L E S I n f o r m a t i o n P r o v i d e d b y :[...]

EMISSION CONTROL SYSTEM MAINTENANCE The “Scheduled” maintenance services, listed in bold type on the following pages must be done at the times or mileages specified to assur e the continued proper func- tioning of the emission control system. These, and all other maintenance services included in this manual, should be done to provide best vehic[...]

if it has been 6 months since your last oil change even if the oil change indicator message is NOT illumi- nated. • Change your engine oil more often if you drive your vehicle off-r oad for an extended period of time. • Under no circumstances should oil change intervals exceed 6,000 miles (10,000 km) or 6 months, whichever comes first. Y our de[...]

Once a Month • Check tire pressur e and look for unusual wear or damage. • Inspect the battery and clean and tighten the terminals as requir ed. • Check the fluid levels of coolant reservoir , brake master cylinder , power steering and transmission and add as needed. • Check all lights and other electrical items for corr ect operation. At E[...]

Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Miles Kilometers or Months Change the engine oil and engine oil filter . 6,000 10 000 6 Rotate T ires. 6,000 10 000 6 If using your vehicle for any of the following: Dusty or off-r oad conditions. Inspect the engine air cleaner fi[...]

Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Miles Kilometers or Months Replace the engine air cleaner filter . 30,000 50 000 30 Inspect the transfer case fluid. 30,000 50 000 30 Replace the top row of spark plugs on 4.7L engines. ** 30,000 50 000 30 Replace the spark plugs [...]

Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Miles Kilometers or Months Change the manual transmission fluid if using your vehicle for any of the following: trailer towing, snow- plowing, heavy loading, taxi, police, delivery service (commercial service), off-road, desert op[...]

Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Miles Kilometers or Months Drain and refill automatic transmission fluid and change main sump filter and spin-on cooler return filter (if equipped)(4.7L/5.7L engines only). 120,000 200 000 120 Replace Accessory Drive Belt(s). 120,[...]

IF YOU NEED CONSUMER ASSIST ANCE CONTENTS m Suggestions For Obtaining Service For Y our V ehicle .............................. 4 5 2 ▫ Prepare For The Appointment ............ 4 5 2 ▫ Prepare A List ........................ 4 5 2 ▫ Be Reasonable W ith Requests ............. 4 5 2 m If Y ou Need Assistance ................... 4 5 2 m W arrant[...]

SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty , discuss additional charges with the service manager . Keep a maintenance log of your vehicle’s[...]

technicians, special tools, and the latest information to assure your vehicle is fixed corr ectly and in a timely manner . This is why you should always talk to your dealer’s service manager first. Most matters can be resolved with this process. • If for some reason you are still not satisfied, talk to the general manager or owner of the dealer[...]

Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) T o assist customers who have hearing difficulties, the manufacturer has installed special TDD (T elecommuni- cation Devices for the Deaf) equipment at its Customer Center . Any hearing or speech impair ed customer who has access to a TDD or a conventional teletypewriter (TTY) in the [...]

W ARNING! Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. In addition, certain fluids contained in vehicles and certain prod- ucts of component wear contain or emit chemicals known to the State of Califor[...]

REPORTING SAFETY DEFECTS In the 50 United States and W ashington D.C.: If you believe that your vehicle has a defect, which could cause a crash or cause injury or death, you should immediately inform the National Highway T raffic Safety Administra- tion (NHTSA) in addition to notifying the manufacturer . If NHTSA receives similar complaints, it may[...]

PUBLICA TION ORDER FORMS T o order the following manuals, you may use either the website or the phone numbers listed below . V isa, Mas- tercar d, American Express, and Discover orders are ac- cepted. If you prefer mailing your payment, please call for an order form. NOTE: A street address is requir ed when ordering manuals. (No P .O. Boxes). • S[...]

Call T oll Free at: • 1–800–890–4038 (U.S.) • 1–800–387–1 143 (Canada) Or V isit us on the W orld Wide W eb at: • www .techauthority .daimlerchrysler .com • www .daimlerchrysler .ca/manuals DEP ARTMENT OF TRANSPORT A TION UNIFORM TIRE QUALITY GRADES The following describes the tire grading categories estab- lished by the Nationa[...]

on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction perfor- mance. W ARNING! The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics. T emperature Grades The temperature g[...]

I n f o r m a t i o n P r o v i d e d b y :[...]

INDEX 10 I n f o r m a t i o n P r o v i d e d b y :[...]

ABS (Anti-Lock Brake System) ............ 195,291 Adding Fuel ........................... 3 3 6 Adjustable Pedals ....................... 1 4 8 Air Cleaner , Engine (Engine Air Cleaner Filter) . . . 395 Air Conditioner Maintenance ............ 252,399 Air Conditioning ........................ 2 5 1 Air Conditioning, Operating T ips ............ 2 6[...]

Special Additives ...................... 4 1 3 T orque Converter ...................... 2 8 0 Axle Fluid ............................. 4 4 1 Axle Lubrication (Axle Fluid) ............... 4 1 4 Ball Joints ............................. 4 0 0 Battery ....................... 384,385,386,397 Charging ............................ 3 7 5 Emergency Startin[...]

Oil (Engine) .......................... 3 9 3 Power Steering ........................ 3 9 9 Radiator (Coolant Pressur e) ............... 4 0 6 Car W ashes ............................ 4 1 6 Carbon Monoxide W arning ............... 75,336 Cargo Management System ................. 1 8 5 Cargo Organizer ....................... 1 8 5 Cargo Organizer ..[...]

Adding Coolant (Antifreeze) .............. 4 0 5 Coolant Capacity ...................... 4 3 9 Coolant Level ...................... 403,407 Disposal of Used Coolant ................ 4 0 7 Drain, Flush, and Refill .................. 4 0 4 Inspection ........................... 4 0 7 Points to Remember .................... 4 0 7 Pressur e Cap .......[...]

Driving Through Flowing, Rising, or Shallow Standing W ater .............................. 2 8 8 DVD Player (V ideo Entertainment System) ...... 2 4 4 E-85 Fuel ............................. 3 3 9 Electric Remote Mirrors .................... 8 5 Electrical Power Outlets ................... 1 7 7 Electronic Brake Control System ............. 2 9 5 A[...]

O i l ........................... 391,439,440 Oil Filler Cap ................. 384,385,386,393 Oil Selection ....................... 393,439 Oil Synthetic ......................... 3 9 4 Starting ............................. 2 7 3 T emperature Gauge ..................... 1 9 3 Entry System, Illuminated .................. 2 0 Equipment Identificati[...]

Engine Oil ........................... 3 9 1 Power Steering ........................ 3 9 9 T ransfer Case ......................... 4 1 4 Fluids, Lubricants and Genuine Parts .......... 4 4 0 Fog Lights .......................... 141,438 Folding Rear Seat ..................... 123,126 Four Wheel Drive ....................... 2 8 1 Operation .......[...]

Gross V ehicle W eight Rating ................ 3 4 6 GVWR ............................ 343,346 Hands-Free Phone (UConnect™) ........ 87,236,237 Hard Drive (HDD) .................... 206,236 Hazard Driving Through Flowing, Rising, or Shallow Standing W ater ........................ 2 8 8 Hazard W arning Flasher ................... 3 6 6 Headlights[...]

Information Center , V ehicle ................. 1 5 9 Inside Rearview Mirror .................... 8 3 Instrument Cluster ....................... 1 9 3 Instrument Panel and Contr ols .............. 1 9 1 Instrument Panel Lens Cleaning ............. 4 1 9 Integrated Power Module (Fuses) ............ 4 2 7 Interior Appearance Care .................. 4[...]

Center Mounted Stop ................... 4 3 7 Courtesy/Reading ..................... 1 5 8 Cruise .............................. 2 0 3 Daytime Running ...................... 1 4 1 Dome .............................. 1 5 9 Electronic Stability Program (ESP) Indicator ......................... 200,300 F o g .......................... 141,198,438 Haza[...]

Lower Anchors and T ether for CHildren (LA TCH) .............................. 6 8 Lubrication, Body ....................... 4 0 1 Lug Nuts ............................. 3 7 3 Luggage Carrier ......................... 1 8 3 Lumbar Support ........................ 1 1 6 Maintenance Free Battery .................. 3 9 7 Maintenance Procedur es ......[...]

Oil Change Indicator , Reset ................. 1 9 7 Oil, Engine ......................... 391,440 Capacity ............................ 4 3 9 Change Interval ....................... 3 9 2 Dipstick ............................. 3 9 1 Disposal ............................ 3 9 4 Filter ............................ 394,440 Filter Disposal ............[...]

Power Brakes .............................. 4 1 0 Distribution Center (Fuses) ....... 384,385,386,424 Door Locks ......................... 20,29 Lift Gate ............................. 3 6 Mirrors .............................. 8 5 Outlet (Auxiliary Electrical Outlet) .......... 1 7 7 Steering .......................... 294,399 Steering Filler Cap [...]

Recreational T owing ...................... 3 6 0 Shifting into T ransfer Case Neutral (N) ....... 3 6 1 Shifting out of T ransfer Case Neutral (N) ..... 3 6 3 Reformulated Gasoline .................... 3 3 3 Refrigerant ............................ 4 0 0 Release, Hood .......................... 1 3 5 Reminder , Seat Belt ....................... 5 [...]

Pretensioners .......................... 5 0 Reminder ............................ 1 9 4 Seats ................................. 1 1 4 Adjustment .......................... 1 1 4 Cleaning ............................ 4 1 7 Fold and T umble Rear ................ 121,123 Heated .............................. 1 1 8 Lumbar Support .....................[...]

Spark Plugs ............................ 3 9 5 Speed Control (Cruise Control) .............. 1 4 9 Speedometer ........................... 1 9 5 Starting ............................... 2 7 3 Automatic T ransmission ................. 2 7 3 Emergency (Jump Starting) ............... 3 7 5 Engine Block Heater .................... 2 7 6 Engine Fails to[...]

T i r e s ............................ 77,313,458 Aging (Life of T ires) .................... 3 1 9 Air Pressur e .......................... 3 1 3 Alignment ........................... 3 2 1 Chains .............................. 3 2 2 Changing ............................ 3 6 8 Compact Spare ........................ 3 1 7 General Information ......[...]

Cooling System T ips .................... 3 5 9 Hitches ............................. 3 5 1 Minimum Requirements ................. 3 5 3 T railer and T ongue W eight ................ 3 5 2 W iring .............................. 3 5 6 T railer T owing Guide ..................... 3 5 2 T railer W eight .......................... 3 5 2 T ransaxle ....[...]

V ehicle Identification Number (VIN) ............ 7 V ehicle Information Center ................. 1 5 9 V ehicle Loading ...................... 310,343 V ehicle Modifications/Alterations .............. 8 V ehicle Storage ......................... 4 2 9 V ideo Entertainment System (Rear Seat V ideo System) .................. 2 4 4 W arning Lights (I[...]

INTRODUCTION INTRODUCTION ROLLOVERWARNING HOW TO USETHIS MANUAL WARNINGSAND CAUTIONS VEHICLE IDENTIFICA TION NUMBER VEHICLE MODIFICA TIONS/ALTERA TIONS THINGS TO KNOW BEFORE ST ARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Ignition Key RemovalLocking Doors With The KeySENTRY KEY Replacement KeysCustomer Key ProgrammingGeneral InformationIGNITION AND S[...]