Dolby Laboratories DVD Video manuale d’uso

INTRODUCTION ..................................................................P 5 INST ALLA TION ....................................................................P 7 ST ANDARD CONNECTIONS ................................................P 9 GETTING ST ARTED ..............................................................P 11 PLA YING A DVD-VIDEO D[...]

6 english Y our Philips DVD-Video player plays digital video discs conforming to the universal DVD-Video standard. With it, you will be able to enjoy full-length movies with true cinema picture quality , and stereo or multichannel sound (depending on the disc, and on your playback set-up). The unique features of DVD-Video, such as selection of soun[...]

1 Disc loading tray 2 T ray OPEN/CLOSE key 3 Display 4 Remote control sensor 5 PLA Y key 6 P AUSE/Still, Step key 7 STOP key 8 Standby indicator FRONT OF PLA YER english 7 INST ALLA TION ANALOG Y/C ON / OFF MAINS Y U/Cr V/Cb CVBS A/V EUROCONNECTOR (RGB OUT) COAX OPTO DIG. OUT AUDIO OUTPUT VIDEO OUTPUT 1 2 3 4 5 6 7 8 9 DVD 960 D VD / VIDEO CD / CD [...]

1 Remote control active (flashing) 2 FTS (Favourite T rack Selection) active 3 SHUFFLE active 4 P AUSE active 5 SCAN active 6 A-B REPEA T/CHAPTER/TITLE/TRACK mode active 7 Chapter or track calendar 8 TOT AL/REMaining/TRACK TIME in hours, minutes and seconds 9 (V)CD disc inserted 0 DVD disc inserted ! DVD CHAPTER or VCD/CD TRACK number @ DVD TITLE n[...]

- Depending on your TV and other equipment, there are various ways you could connect the DVD-Video player . These are shown below . - Please refer to your TV , VCR, Stereo System and any other User Manual(s) as necessary to make the optimal connections. Connection to a TV with an A/V Euroconnector socket 1 Connect the A/V Euroconnector on the rear [...]

For multichannel sound, your player provides both digital and analog audio outputs. DIGIT AL (MPEG 2 MUL TICHANNEL OR DOLBY DIGIT AL™) MUL TICHANNEL SOUND 1 For this, which provides the highest multichannel sound quality , you need a digital multichannel A/V receiver . 2 Connect the digital audio output on the rear of the player to a suitable inp[...]

The remote control of the DVD-Video player can be program- med to control your T elevision, Amplifier or Receiver . For the control of these products the following buttons on the remote control are available: • Amplifier - V olume Up/Down and Audio Mute. • Receiver - V olume Up/Down and Audio Mute. • T elevision - V olume Up, V olume Down, Ch[...]

1 Press OPEN/CLOSE on the front of the player . The disc tray opens. 2 Lay your chosen disc in the tray , label side up. Make sure it is sitting properly in the correct recess. 3 Gently push the tray , or press OPEN/CLOSE, to close the tray . - With Autoplay on (the factory setting) play starts. - With Autoplay off, the (play) screen for the type o[...]

..........................................Audio system ..........................................Remaining time of title ..........................................Elapsed time ..........................................Resume ..........................................T otal time PLA YING A TITLE • With Autoplay on, play starts when you close the d[...]

JOG/SHUTTLE This is a convenient way to view still pictures (Jog), and to search in slow , normal or fast motion (Shuttle). Both functions work in reverse as well as forward play . • T o select Jog/Shuttle, press JOG/P AUSE. The key lights up, and the player goes into Pause mode. Jog • With the Shuttle ring in the center position, turn the Jog [...]

angle feature. • T o turn off the angle feature, press OSD . ➜ the angle icon disappears. • T o turn the angle feature on again, press angle again. ➜ the angle icon reappears. CHANGING THE AUDIO LANGUAGE AND CHANNEL CONFIGURA TION This changes the language and the audio channel configuration when alternatives are available on the disc. • [...]

Y ou will recognize Video CDs by the logo. Depending on the material on the disc (a movie, video clips, a drama series, etc.) it may have one or more tracks, and tracks may have one or more indexes, as indicated on the disc case. T o make access easy and convenient, your player lets you move between tracks, and between indexes. Some Video CDs have [...]

PLA YBACK CONTROL (PBC) • Insert a Video CD with PBC and press 2 . ➜ The PBC menu appears on the TV screen. • Go through the menu with the keys indicated on the TV screen until your chosen passage starts to play . If a PBC menu consists of a list of titles, you can select a T itle directly . • Enter your choice with the J , K or numerical k[...]

SHUFFLE This shuffles the playing order of the tracks, if the disc has more than one. • Press SHUFFLE briefly during play . ➜ appears on the screen for about 2 seconds. • As each track is played, its number disappears from the track calendar . •T o return to normal play , press SHUFFLE briefly . REPEA T TRACK/DISC • T o repeat the current[...]

NOTE - If the number has more than one digit, press the keys in rapid succession. SHUFFLE • Press SHUFFLE briefly during play . ➜ The order of the tracks is changed. • As each track is played, its number disappears from the player display . • T o return to normal play , press SHUFFLE briefly again. REPEA T TRACK/DISC • T o repeat the curr[...]

4 Press b . 5 Repeat steps 3 and 4 to select further track numbers in the same way . If you change your mind, you can de-select track numbers in reverse order by pressing o as required. 6 T o clear your whole selection and start again, press 9 . When your FTS program is complete, press 2 to start play , or RETURN to go back to Stop mode. In either [...]

Factory setting ON means that discs starts to play automatically when inserted. Set to OFF if you prefer to start play manually . Factory setting ON means that when a disc with an FTS program (see ‘Compiling an FTS program) is inserted, the FTS program automatically starts to play . Set to Off if you prefer to control FTS play manually . Factory [...]

ACTIV A TING P ARENT AL CONTROL This can only be done in Stop mode. 1 Press SETUP to obtain the Settings menu. 2 Move to Parental Control using ob . 3 Press l or r to change Parental Control to Active. 4 Y ou will be asked to enter a 4-digit pin code of your own choice, and then to confirm your choice. 5 This code must then be entered to play any D[...]

If it appears that the DVD-Video player is faulty , first consult this checklist. It may be that something simple has been overlooked. Under no circumstances attempt to repair the system yourself; this will invalidate the warranty . Look for the specific symptom(s). Then perform only the actions listed to remedy the specific symptom(s). SYMPTOM •[...]

If the fault persists, you can run the Diagnostic Program in the player . INSTRUCTIONS: 1 Switch the player off. 2 Hold both OPEN/CLOSE and ; pressed and switch on the player . ➜ ‘ BUSY ’ appears on the display together with a counter . The counter indicates the termination of the test when it reaches zero. ➜ After a few minutes, ‘ BUSY ?[...]