Eiki LC-W5 manuale d’uso

MUL TIMEDIA PROJECT OR MODEL LC-W5 O WNER ’S MANU AL ✽ Projection lens is optional.[...]

2 This Multimedia Projector is designed with most advanced technology for portabilit y , durability , and ease of use. This projector utilizes built-in multimedia feat ures, a palet te of 1 .07 billion colors, and matrix liquid cr ystal display (LCD) tec hnology . ◆ Functionally Ric h ◆ Simple Computer S ystem Set ting The projector has the Mul[...]

3 T rademarks Eac h name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation. T able of Cont ents Feat ur es and Design ................ 2 T able of Contents .................. 3 T o The Owner ..................... 4 Saf ety Instr uctions ................. 5 Air Circulation 6 Instal[...]

4 C A U T I O N : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NO T REMO VE CO VER (OR BACK). NO USER-SERVICEABLE P ARTS INSIDE EX CEPT LAMP REPLACEMENT . REFER SER VICING T O QU ALIFIED SERVICE PERSONNEL. THIS S YMBOL INDICA TES THA T D ANGERO US VO L T AGE C O N S T I T UT I N G A RI S K O F E L EC TR IC SHOCK IS PRESENT WITHIN THIS UNIT . THIS SYMBO[...]

5 All the saf et y and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from A C pow er supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. F ollow all warnings and instr uctions marked on the p[...]

6 Openings in the cabinet are provided f or ventilation. T o ensure reliable operation of the product and to protect it from ov erheating , these openings must not be bloc ked or co vered. CA UTION Hot air is exhausted from the e xhaust vent. When using or installing the projector , the following precautions should be taken. – Do not put any flam[...]

7 Saf ety Instr uctions Use the projector properly in specified positions. Improper positioning may reduce the lamp lif e and result in sev ere accident or fire hazard. This projector can project the pict ure in upward, do wnward, or inclined position in perpendicular direction to the horizontal plane. Installing the Pr ojector in Pr oper Dir ectio[...]

8 Mo ving the Project or CA UTION IN CARR YING OR TRANSPORTING THE PROJECT OR – Do not drop or bump the projector , other wise damages or malfunctions may result. – When carr ying the projector , use a suit able carr ying case. – Do not transport the projector by courier or any other transport ser vice in an unsuit able transport case. This m[...]

9 AC P ow er Cord for the Unit ed Kingdom: This cord is already fit ted with a moulded plug incorporating a fuse, the value of whic h is indicated on the pin face of the plug . Should the fuse need to be replaced, an AST A approved BS 1362 fuse must be used of the same rating , marked thus A S A . If the fuse cover is det ac hable, never use the pl[...]

10 u e r t F ront o q w y i Bac k q Lens Mount Co ver w Pr ojection Lens (Option) e Indicators r Infr ar ed Remote Receiver (F ront) !2 CA UTION Hot air is exhausted from the e xhaust vent. Do not put heat-sensitiv e objects near this side. !0 Infrar ed Remote Receiver (Rear) !1 Exhaust V ent t Adjustable Feet y T er minals and Conne[...]

11 T er minals and Connectors r  R/C JA CK When using the wired remote control, connect the wired remote control to this jac k with a remote control cable (supplied). e USB CONNECT OR (Ser ies B) USB connector is to used to service the projector . i S-VIDEO INPUT J ACK Connect the S-VIDEO output signal from video equipment to this jac k (p[...]

12 i FOCUS but ton A djust the focus. (p.27) w ZOOM but ton Zoom in and out the images. (p.27) q ON/ST AND-B Y butt on T urn the projector on or of f . (pp.23,24) o INPUT but ton Select an input source INPU T 1, INPU T 2, Input 3 or Input 4. (pp.31 -33) y A UT O PC ADJ . butt on A utomatically adjust the computer image to its optimum se[...]

13 Indicat ors q w e r t y u e W ARNING TEMP . indicator T his indicator flashes red when internal projector temperature is too high. (pp.65, 72-7 4) u LAMP 1 REPLACE indicat or T urn orange when the lif e of the projection lamp1 draws to an end. (pp.61, 73) q LAMP Indicator T his indicator is dim when the projector is turned on. And bright w[...]

Remot e Control P art Names and F unctions q t e !0 i !4 r !5 !3 !1 w y u o !7 !2 !8 !6 !9 @0 e LIGHT but ton Light the but tons on the remote control for about 1 0 seconds. r MENU butt on Open or close the On-Screen MENU . (pp.25-26) t POINT ed 7 8 but tons – Select an item or adjust the value in The ON-SCREEN MENU . –P an the image in DIGI[...]

Remot e Control Bat tery Installation 1 2 3 Open the bat ter y compartment lid. Install new bat teries into the compartment. Replace the compartment lid. T wo AA size batter ies F or correct polarit y (+ and –), be sure bat ter y terminals are in contact with pins in the compartment. T o ensure safe operation, please observe the follo wing precau[...]

16 The eight dif f erent remote control codes (Code 1–Code 8) are assigned to this projector . Switc hing the remote control codes prev ents interf erence from other remote controls when several projectors or video equipment next to eac h other are operated at the same time. Change the remote control code for the projector first bef ore c hanging[...]

17 Installation Lens Installation Bef ore set ting up the projector , inst all Projection L ens on the projector . Before installation, c hec k where the projector is used and prepare a suit able lens. F or the specifications of Projection L ens, cont act sales dealer where you purc hased the projector . P ositioning Project or This projector is de[...]

18 Pictur e Level and Pitc h Adjustment Installation AD JUST ABLE FEET REAR AD JUST ABLE FEET . (Ref er to p.1 0). Lens Shif t Adjustment The projection angle is adjustable up to 2.8 degrees upward and do wnw ard respectively by rotating front and bac k f eet . T o raise the projector , rot ate the f eet cloc kwise. T o low er the projector or to r[...]

19 T er minals of Project or The projector has two replaceable Interf ace board slots. The projector's functions can be e xtended by installing the optional interface boards into the terminal slots. 2 v acant slots (Input 3 and 4) are provided in y our purc hasing the projector . F or the Optional Interface Boards, contact sales dealer where y[...]

20 Installation Connecting t o Computer V GA Cable Monitor Output Desktop type Laptop type T erminals of the project or Monitor Output D VI Cable BNC Cable ✽ Monitor Output U n p l u g th e p ow e r co rd s o f b o t h th e projector and external equipment from the A C outlet before connecting cables. Cables used for connection • V GA Cable (D-[...]

21 Installation Connecting t o V ideo Equipment Video Source (e xample) Video Casset te Recorder Video Disc Pla yer RGB SCAR T 21 -pin Output Y Pb/Cb Pr/Cr Y -Pb/Cb-Pr/Cr Component video output equipment. (suc h as DVD pla yer or high-definition TV source.) Co mpo nent V ide o Out put BNC Cable Dig ital O utp ut ( H DC P co mpat ible ) D VI Cable S[...]

22 NOTE ON THE PO WER COR D A C pow er cord must meet the requirements of the countr y where you use the projector . Confirm the A C plug t ype with the c hart below and proper A C power cord must be used. If the supplied A C pow er cord does not match y our A C outlet, cont act your sales dealer . Pr ojector side A C Outlet side T o PO WER CORD CO[...]

23 T ur ning On the Project or Connect the projector’ s A C pow er cord into an A C outlet and t urn on the MAIN ON/OFF Switc h. The LAMP indicator lights red and the READ Y indicator lights green. Press the ON/S T AND-B Y but ton on the side control or on the remote control. The LAMP indicator dims red and the cooling fans start to operate. The [...]

24 Press the ON/S T AND-B Y but ton on the side control or on the remote control, and “P ow er of f?” appears on the screen. Press the ON/S T AND-B Y but ton on the side control or on the remote control again to t urn of f the projector . The LAMP indicator lights bright and the READ Y indicator turns of f . Af ter the projector is turned of f [...]

25 Side Contr ol SELECT butt on Ho w to Oper ate the On-Scr een Menu MENU butt on SELECT butt on POINT butt ons On-Scr een Menu The projector can be adjusted or set via the On-Screen Menu. F or eac h adjustment and set ting procedure, refer to the respective sections in this manual. Use the P oint 7 8 but tons to select a Menu icon. Use the P oint [...]

26 Menu Bar For Computer Source For Video Source Show the selected Menu of the On-Screen Menu. Used to select computer system (p. 34). Used to select an image lev el among St andard, Real, and Image 1–1 0(p. 38). Display the input source inf ormation(p. 28). Used to adjust the computer image. [Contrast/ Brightness/ Color management/Auto pict ure [...]

27 Oper ating with Project or Control Display “Lens shif t” on the screen. Use the P oint ed7 8 but tons to position the screen to the desired point without having pict ure distortion. The screen can be mo ved up or do wn to 88 percent, or sidew ay s up to 1 3 percent from the central axis of the lens shif t. Lens Shif t Adjustment ✔ Note: ?[...]

28 Basic Oper ation Infor mation Information displa y can be used to confirm the current operating condition of the projector and the signal being projected through the projector . Press the INFORMA TION but ton to display the information windo w on the screen. T o hide the information windo w , press the INFORMA TION but ton again or P oint 7 8 bu[...]

29 Oper ating with Remote Contr ol Using the remote control for some frequently used operations is advisable. J ust pressing one of the but tons enables you to mak e the desired operation quic kly without calling up the On-Screen Menu. Press the FREEZE but ton on the remote control to freeze the pict ure on the screen. T o cancel the FREEZE functio[...]

30 KEY ST ONE butt on Reduce the upper width with P oint e but ton. Reduce the low er width with P oint d but ton. Reduce the lef t part with P oint 7 but ton. Reduce the right part with P oint 8 but ton. • The white arrows indicate that there is no correction. • A red arrow indicates the direction of correction. • An arrow disappears at the [...]

31 Remote Contr ol INPUT butt ons Input Press the INPU T 1, INPU T 2, INPUT 3 or INPU T 4 but ton on the remote control. It switc hes to INPU T 1, INPU T 2, INPU T 3 or INPU T 4 as you press the INPU T but ton. Bef ore using the INPU T but ton on the remote control, you must select a correct input source b y On-Screen Menu and the latest input sour[...]

32 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the INPU T Menu icon. Use the P oint ed but tons to mov e the red arro w pointer to the desired input and then press the SELECT but ton. Then y ou can switc h to the desired input. 1 2 Use the P oint ed but tons to select the desir[...]

33 When the video input signal is connected to the S-VIDEO jac k, select S-Video. When the video input signal is connected to the Y -Pb/Cb- Pr/Cr jac ks, select Y , Pb/Cb, Pr/Cr . When the video input signal is connected to the VIDEO jac k, select Video. When connecting to video equipment, select the type of Video source in the Source Select Menu. [...]

34 Comput er Syst em Selection This projector automatically t unes to various types of computers based on V GA, S V GA, XG A, SXGA, SXGA+, WXGA, or UXG A (ref er to “Compatible Computer Specifications” on pages 75-7 6). If a computer is selected as a signal source, this projector automatically detects the signal format and t unes to project a p[...]

35 A uto PC Adjustment A uto PC Adjustment function is provided to automatically adjust Fine sync, T ot al dots, Horizontal and V ertical positions to conform to y our computer . Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the PC A djust Menu icon. 1 2 Use the P oint ed buttons [...]

36 Manual PC Adjustment Some computers employ special signal f ormats whic h may not be t uned by Multi-Scan system of this projector . Manual PC Adjustment enables y ou to precisely adjust sev eral parameters to matc h those special signal formats. The projector has 1 0 independent memor y areas to store those parameters manually adjusted. It allo[...]

37 Exit the PC A djust Menu. T o store the adjusted dat a, select Store and then press the SELECT but ton. Mov e the red arrow pointer to one of the Mode 1 to 1 0 in whic h you want to store, and then press the SELECT but ton. T o reset the adjusted dat a, select Reset and press the SELECT but ton. A confirmation bo x appears and then select [Y es][...]

38 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Image Select Menu icon. 1 2 Use the P oint ed but tons to mov e the red frame pointer to the desired image lev el and then press the SELECT but ton. IMAGE SELECT MENU Normal picture le vel preset on the projector . Standard Pic[...]

39 Scr een Size Adjustment Select the desired screen size that conf orms to the input signal source. Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Screen Menu icon. 1 Use the P oint ed but tons to mov e the red frame pointer to the desired function and then press the SELECT b[...]

40 Select Digital zoom +. The On-Screen Menu disappears and “D . zoom +” appears. P ress the SELECT button to e xpand the image size. Use the P oint ed7 8 but tons to pan the image. The P anning function can work only when the image is larger than the screen size. Y ou can also enter the Digital zoom + mode by pressing the D .ZOOM but ton on th[...]

41 Comput er Input A V S YS TEM MENU (VIDEO OR S-VIDEO) A V S YS TEM MENU (COMPONENT VIDEO) V ideo Syst em Selection Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the A V Sy stem Menu icon. Use the P oint ed but tons to mov e the red arro w pointer to the desired system and then [...]

42 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Image Select Menu icon. 1 2 Use the P oint ed but tons to mov e the red frame pointer to the desired image lev el and then press the SELECT but ton. IMAGE SELECT MENU Imag e Level Selection Mov e the red frame pointer to the de[...]

43 Scr een Size Adjustment Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Screen Menu icon. Use the P oint ed but tons to mov e the red frame pointer to the desired function and then press the SELECT but ton. 1 2 Nor mal ✔ Note: • When no signal is detected, “Normal” i[...]

44 Ke ystone This function is used to store or reset the k eystone cor rection when the Main On/Of f Switc h is pressed to Off or the A C pow er cord is unplugged. Use the P oint 7 8 but tons to switc h between eac h option. Store ... Keep the k eystone cor rection even when the Main On/Of f Switc h is pressed to Off or the A C power cord is unplug[...]

45 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Image A djust Menu icon. 1 2 Use the P oint ed but tons to mov e the red frame pointer to the desired item and then press the SELECT but ton to display the adjustment dialog bo x. Use the P oint 7 8 but tons to adjust the set t[...]

46 A uto pictur e control Use the P oint 7 8 but tons to select the desired A uto picture control position (Of f , L1 or L2). Of f .... Auto pict ure control OFF position. L1 ..... Auto pict ure control LEVEL 1 position. L2 ..... Auto pict ure control LEVEL 2 position. Clear the c hec k mark if you do not want to apply the adjusted color data; sele[...]

47 Use the P oint 7 8 but tons to adjust the gamma value to obtain a bet ter balance of contrast (from 0 to 1 5). Gamma Press the P oint 7 but ton to decrease the sharpness of the image; press the P oint 8 but ton to increase the sharpness of the image (from 0 to 31). Shar pness An interlaced video signal can be display ed in progressive mode. Pres[...]

48 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Set ting Menu icon. 1 2 Language The language used in the On-Screen Menu is a vailable in English, German, F renc h, It alian, Spanish, P ort uguese, Dutc h, Sw edish, Russian, Chinese, Korean, or J apanese. Use the P oint ed b[...]

49 This function allo ws you to customize the screen logo with L ogo select, Capture, and L ogo PIN code loc k functions. Logo ✔ Note: • Bef ore capturing an image, select “St andard” in the Image Select Menu to capture a proper image. (pp. 38, 42) • A signal from a computer can be captured up to W-XG A (1 366 x 800). •Certain signals m[...]

50 Change the Log o PIN code lock setting Af ter a correct Logo PIN code is entered, the follo wing dialog box appears. Use the P oint 7 8 buttons to switc h On/Off , This function pre vents an unauthorized person from c hanging the screen logo. Of f .... The screen logo can be c hanged freely from the Logo Menu. On .... The screen logo cannot be c[...]

51 Lamp control Choose the running speed of cooling f ans from the following options. Normal ....... Normal speed. Max ........... Faster than the normal speed. F an control This function allo ws you to c hange the brightness of the screen. Auto ..... Brightness according to the input signal. Normal ... Normal brightness. Eco ...... Lo wer brightne[...]

52 P ower manag ement Time lef t before the lamp is of f Press the SELECT but ton at P ower management and the dialog box appears. Use the P oint 7 8 but tons to choose one of the three options. Press the P oint d but ton to select the timer , and then use the P oint 7 8 but tons to set the timer F or reducing power consumption as w ell as maint ai[...]

53 Secur ity Ke y lock Ke y lock Secur ity Select Ke y lock and this box appears. Choose one of the alternatives with the P oint ed buttons and select [Y es] to activate it. This function loc ks the side control and remote control but tons to prev ent operation by unauthorized persons. ..... Unloc ked. ..... Loc k the side control but tons. T o unl[...]

54 Change the PIN Code Change the PIN code CA UTION: WHEN Y OU HA VE CHANGED THE PIN CODE, WRITE DOWN A NEW PIN CODE IN COLUMN OF THE PIN CODE NO. MEMO ON P AGE 80, AND KEEP IT SECUREL Y . IF Y OU FORGET Y OUR PIN CODE, THE PROJECT OR CAN NO L ONGER BE ST ARTED. The PIN code can be c hanged to your desired four -digit number . Press the P oint d bu[...]

55 Set ting Shutt er Shut ter function is av ailable to bloc k out light to the screen, so that the screen can be used for the other presenters. Prohibits the shut ter operation from the remote control and the projector's side control. Remote control Selecting "On" prohibits the shut ter operation from the remote control. Projector .[...]

56 F actory def ault This function ret urns all set ting values ex cept for the user logo, PIN code loc k, Logo PIN code loc k, lamp counter , filter counter and filter timer to the factory default set tings. F actory def ault Quit Exit the Set ting Menu. Select Factory default and this box appears. Select [Y es], and the ne xt box appears. T est p[...]

57 Maint enance and Car e Filt er Instr uctions Filter prev ents dust from accumulating on the optical elements inside the projector . Should the filter becomes clogged with dust particles, it will reduce cooling fans ’ ef f ectiveness and ma y result in internal heat buildup and adversely af f ect the lif e of the projector . This projector has [...]

58 T urn of f the projector , press the Main On/Of f Switc h to Of f and unplug the A C pow er cord from the A C outlet. First, clean up the dust on the projector and around the air vents. 1 2 Slide and open the Filter cov er . (See the right figure.) 3 Put the ne w one bac k into the position and close the filter cov er . Make sure that the filter[...]

59 Be sure to reset the Scroll counter af ter replacing the filter cartridge. Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Set ting Menu icon. Use the P oint ed but tons to mov e the red frame pointer to Filter counter and then press the SELECT but ton. A dialog box appears [...]

60 Lamp Manag ement This P rojector is equipped with 2 Projection Lamps to ensure brighter image and those lamps are controlled b y the Lamp Management F unction. The Lamp Management F unction detects the status of lamps and shows the status on screen or on the LAMP 1/2 REPLA CE indicators. This function also automatically controls the Lamp Mode wh[...]

61 Maint enance and Care Chec k the number of lamp to be replaced on the Lamp Status Display . Loosen a scre w on the Lamp Cov er . Slide and open the Lamp Cov er until it makes a clic king sound. (See the right figure.) 1 3 Loosen two scre ws and pull out the Lamp to be replaced by grasping handle. 4 T urn of f the projector , press the Main On/Of[...]

62 Maint enance and Care ORDER REPLACEMENT LAMP Replacement Lamp can be ordered through y our dealer . When ordering a Projection Lamp, give the follo wing information to the dealer . ● Model No. of your pr ojector : LC-W5 ● Replacement Lamp T ype No. : PO A -LMP1 04 (Ser vice Parts No. 61 0 337 0262) Reset ting the Lamp Counter Be sure to rese[...]

63 This projector uses a high-pressure lamp whic h must be handled carefully and properly . Improper handling may result in accidents, injury , or create a fire hazard. ● Lamp lif etime may dif f er from lamp to lamp and according to the environment of use. There is no guarantee of the same lif etime for eac h lamp. Some lamps may fail or termina[...]

64 T urn of f the projector , press the Main On/Of f Switc h to Of f and unplug the A C pow er cord from the A C outlet before cleaning. Gently wipe the projection lens with a cleaning cloth that contains a small amount of non-abrasive camera lens cleaner , or use a lens cleaning paper or commercially av ailable air blow er to clean the lens. A voi[...]

65 The W ARNING indicators show the state of the function whic h protects the projector . Chec k the st ate of the W ARNING TEMP . indicator and the LAMP indicator to t ake proper maintenance. W ar ning Indicat ors The projector is shut down and the WARNING TEMP . indicator is blinking red. When the temperature inside the projector reac hes a certa[...]

66 T roubleshooting Bef ore calling your dealer or ser vice center for assistance, c hec k the items below once again. 1 . Mak e sure you hav e properly connected the projector to peripheral equipment as described on pages 20–21 . 2. Chec k the cable connection. Make sure that all computers, video equipment, and pow er cords are properly connecte[...]

67  appears on the scr een – The end of lamp lif e is approac hing. Replace the lamp with a new one promptly . (See page 55) appears on the scr een – The filter is out of scroll. Replace the filter cartridge with a new one promptly . (See pages 57 -58) The image is out of f ocus. – A djust the focus of the projector . – Chec k Projection[...]

68 W ARNING: High voltag es ar e used to oper ate this pr ojector . Do not at tempt to open the cabinet. If problems still persist af ter following all operating instructions, cont act the dealer where you purc hased the projector or the ser vice center . Specify the model number and explain about the problem. W e will advise you how to obt ain ser[...]

69 Menu T r ee Input RGB (PC analog) Go to Syst em (1) Input 1 Y , Pb/Cb,Pr/Cr Computer Input/V ideo Input RGB (Scart) RGB (PC digital) RGB (A V HDCP) Input 3 RGB Go to S ystem (1) Go to Syst em (3) Go to Syst em (2) Video S-video Input 2 Go to Syst em (1) Input H-sync freq. V -sync freq. Projector Infor mation Ke y lock Screen Language Lamp mode P[...]

70 Computer Input Syst em (1) Mode 1 Mode 2 Image Select Standard Real Image 1 Image 1 0 PC Adjust Auto PC adj. Fine sync. T otal dots P osition H P osition V Current mode Clamp Display area - H Display area - V Reset Mode free Store Quit 0–31 Y es/No Mode 1 Mode 1 0 Quit ✽ Sy stem displayed in the Sy stem Menu varies depending on the input sig[...]

71 Computer Input/V ideo Input Setting Language Fan control Quit P osition/Simple Menu/Quit Blue/User/Blac k Logo select Capture Logo PIN code loc k Quit Auto/Normal/Eco 1 2 languages provided. Menu Logo Lamp control Both/F ront/Bac k Normal/Max P ower management Bac kground On/Of f Logo PIN code c hange Quit RC sensor Of f/Ready/Shut down 1–30 M[...]

72 Indicat ors and Project or Condition Chec k the indicators for the projector condition. The pr ojector is operating nor mally . • • • on • • • of f • • • blinking at the normal rate (approx. 1 second ON, 1 second OFF) • • • dim • • • blinking slow (approx. 2 seconds ON, 2 seconds OFF) • • • blinking fast (appr[...]

73 Appendix The pr ojector is detecting abnor mal condition. Indicat ors Pr ojector Condition LAMP red READ Y green W ARNING TEMP . red W ARNING FIL TER orang e SHU TTER blue LAMP 1/2 REP . orang e The temperat ure inside the projector is elev ated close to the abnormally high lev el. The temperat ure inside the projector is abnormally high. The pr[...]

74 Appendix The pr ojector is detecting abnor mal condition. Indicat ors Pr ojector Condition LAMP red READ Y green W ARNING TEMP . red W ARNING FIL TER orang e SHU TTER blue LAMP 1/2 REP . orang e If the Filter counter reac hed a time set in the timer set ting, a Filter replacement icon (Fig .2) appears on the screen and the W ARNING FIL TER indic[...]

75 Compatible Comput er Specifications Basically this projector can accept the signal from all computers with the V - and H-F requency mentioned below and less than 230 MHz of Dot Cloc k. PC A djustment can be limited when these modes are selected. Appendix ✽ “T rue ” cannot be selected when UXG A2, UXGA3, UXGA4 and UXG A5 are selected (p.39)[...]

76 When an input signal is digital from the DVI terminal, ref er to the c hart below . Appendix ✔ Note: • Depending on the condition of signals and the type and length of cables, these signals may not be properly view ed. • Specifications are subject to c hange without notice. ON-SCREEN DISPLA Y RESOLUTION H-Fr eq.(kHz) V -Fr eq.(Hz) D-V GA 6[...]

77 T echnical Specifications Mechanical Inf or mation Projector T ype Multi-media Projector Dimensions (W x H x D) 20.87” x 1 0.53” x 29.8” (530 mm x 267 .5 mm x 757 mm) (Not including projections) Net Weight 60.85lbs (27 .6 kg) F eet Adjustment 0˚ to 2.8˚ P anel Resolution LCD Panel S ystem 1 .2” TFT A ctive Matrix type, 3 panels Panel R[...]

78 Optional P arts Model No. Optional Interface Board (DVI) : AH-72003 Optional Interface Board (5-BNC) : AH-720 1 5 Optional Interface Board (D-sub 15) : AH-72031 Optional Interface Board (Dual-SDI) : AH-721 62 Optional Interface Board (Network board) : AH-721 42 The parts listed belo w are optionally av ailable. When ordering those parts, specify[...]

79 Configur ations of T er minals ANAL OG (Mini D-sub 15 pin) 5 1 2 3 4 10 9 6 7 8 15 14 13 1 1 12 Red Input Ground (Horiz.sync.) Green Input No Connect Blue Input Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 +5V P ower Horiz. sync. Ground (V ert. sync.) DDC Data Ground V ert. sync. DDC Cloc k 9 13 10 12 11 14 15 CONTROL POR T CONNECTO[...]

80 W rite down the PIN code number in the column belo w and keep it with this manual securely . If you f orgot or lost the number and unable to operate the projector , contact the ser vice station. Factory default set No: 1 2 3 4* Factory default set No: 4 3 2 1* * Should the four -digit number be c hanged, the factor y set number will be inv alid.[...]

81 Dimensions Unit: inc h (mm) Appendix 5.81(147.5) 20.87(530) 20.65(524.5) 108 ° 8.66(220) 8.46(215) 1.18(30) 7.28(185) 23.62(600) 200.0 234.0 26.77(680) 3.03(77) 9.25(235) 9.25(235) 29.80(757.0) 5.00(127) 9.63(244.5) 10.53(267.5) 1.14(29) 9.82(249.5) 10.43(265) 10.89(276.5) 4.72(120) 8.27(210) 6.89(175) Screw Holes for Ceiling Mount Screw: M8 De[...]

82 Ser ial Control Int erf ace This projector pro vides a function to control and monitor the projector's operations by using the R S-232C serial port. Connect a RS-232C serial cross cable to SERIAL PORT IN on the projector and serial port on the PC. (See p.1 1) Launc h a communication sof tware provided with PC and set up the communication co[...]

83 Status Read Command Appendix The command is sent from PC to the projector with the format belo w; 'CR' [Command] 'CR' Command: one c haracter (refer to the command table below . The projector decodes the command and ret urns the 'Character string' with the format belo w; For mat Command F unction Projector Ret urn P[...]

U .S.A. EIKI International, Inc. 30251 Esperanza Ranc ho Sant a Margarit a CA 92688-21 32 U .S.A. T el : 800-242-3454 (949)-457-0200 Fax : 800-457-3454 (949)-457 -7878 E-Mail : usa@eiki.com Deutschland & Öst er r eich EIKI Deutsc hland GmbH Am F rauwald 1 2, 6551 0 Idstein Deutsc hland T el : 061 26-9371 -0 Fax : 061 26-9371 -1 4 E-Mail : info[...]