Eiki LC-XB41N manuale d’uso

Netw ork Set-up and Operation Wir ed and Wir eless Setting Pr ojector Contr oller Netw ork View er Moderator Function First, read the owner’s manual of the projector to understand the projector’s basic operation and the safety instructions. The safety instructions in the owner’s manuals should be followed. Owner’ s Manual[...]

Compliance For Canadian Users This Class B digital apparatus complies with Canadian ICES-003. Cet apparei numérique de la class B est conforme à la norme NMB-003 du Canada. L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes: (1) il ne doit pas produire de brouillage et (2) l’utilisateur du dispositif doit être p[...]

3 Saf ety Instr uctions Caution about Radio W a ve This unit operates in 2.4 GHz band, the same frequency band used for industrial, scientific, and medical equipment (such as pacemaker), as well as amateur radio stations. Please read “Safety Instructions” section and make sure the following cautions. 1. Be sure that there are no other devices i[...]

4 T able of Cont ents Compliance............................................................................................2 Safety Instructions ................................................................................3 Table of Contents ..................................................................................4 Operating Environmen[...]

5 Table of Contents Advanced Setup .........................................................................................46 TCP/IP ..................................................................................................................46 Wireless Setting ..................................................................................[...]

6 When operating the projector via the networks, computers should meet the operating environment below. OS Microsoft Windows 98SE/Me or Microsoft Windows 2000 Professional or Microsoft Windows XP Home Edition/Professional CPU Pentium III 600MHz or More (more than 2GHz is recommended) Memory 128MB or More Free HDD Space 10MB Screen Resolution Requir[...]

7 Operating Environment and Configuration Netw or k Specifications of the Project or LAN Terminal Data communication speed 100Base-TX (100Mbps)/10Base-T (10Mbps) Protocol TCP/IP USB Wireless LAN Adapter Interface Correspond to IEEE802.11b/g, USB 2.0/1.1 Communication Mode AdHoc, Infrastructure Data Transfer Speed 1/2/5.5/11Mbps (IEEE802.11b) 6/9/12[...]

8[...]

Chapt er 1. About LAN Functions 1 This chapter describes the features, the mechanism, and connection procedures of the LAN. 9[...]

10 This product is loaded with a LAN network function which enables you to project an image on the computer through a projector via Network with dedicated software. With the software, you can also manipulate the projecting image and the projector. This software has functions below and you can use the projector under various network environments to [...]

11 1. About LAN Functions The illustration below shows an example of the projection via the LAN. You can project the image on Computer (1) (Wired LAN connection), or Computer (2) (Wireless LAN connection) through the selected projector . An Example of the Connection 0.0 0.5 1.0 1.5 2.0 0.0 0.5 1.0 1.5 2.0 0.0 0.5 1.0 1.5 2.0 Access point Computer ([...]

12 1. About LAN Functions Connection modes differ depending on the LAN and computer environments. Connect appropriately for each environment. ■ Wireless LAN, Infrastructure Communication Mode Access point Computer (1) Wireless communication mode corresponded computer: Infrastructure ■ Wireless LAN, AdHoc 802.11b Communication Mode Communication[...]

13 1. About LAN Functions ■ Wired LAN Communication Mode Communicate via the LAN line. Computer(1) Computer(2) Computer (3) ✳ Operate the computer mouse with the remote control. When the projector’s remote control employs mouse operating function, you can operate the computer by the remote control which is provided with the projector. Use the[...]

14[...]

This chapter describes how to install the NetworkModule software and how to set up the networks. 2. Set up Procedur es Chapt er 2 15[...]

16 2. Set up Procedur es To use the projector via the networks, follow the setup procedures below. STEP 1 Install the softw ar e on computers. Install the software recorded in CD-ROM on each computer which will be operated. Read following pages of this chapter to install. STEP 2 Select Wired LAN or Wir eless LAN then connect the LAN and set the con[...]

17 2. Setup Procedures Installing the Sof twar e Three pieces of software is recorded in the supplied CD-ROM. 1. Insert the CD-ROM into the drive. The software will be activated automatically and “Software License” screen will be displayed. Read the license carefully and if you agree, check “Agree” then click “OK”. When the screen is no[...]

18 2. Setup Procedures ■ When projecting with the Moderator function. For details about Moderator function, refer to the “8. Use the Moderator Function.” a Install “NetworkModule Client” into each client’s (participants except for the moderator) computers. For installation, refer to “ ■ When projecting via a selected computer which [...]

Chapt er 19 3 3. Names and F unctions of the Operation Scr een This chapter describes the functions of each part of the operation screen.[...]

3. Names and F unctions of the Operation Scr een 20 Select projector input either “Wired” or “Wireless” and the Network connection standby display will appear. Network environment will be shown on the screen. With this screen, you can confirm that the network connection is whether “Wired” or “Wireless”, or network environment of the[...]

21 3.Names and Functions of the Operation Screen This software is to project the computer screen via the networks. To use the moderator function, install this software into each participant’s (except for the moderator) computers. Activate “NetworkModule Client” from the application start menu or the shortcut on the desk top, then following sc[...]

22 3.Names and Functions of the Operation Screen r Real time Capture button Capture (Project) the computer screen in real time. After capturing, the button will change into the Stop Capture button. Click the Stop Capture button, then the projection will stop and the screen will disappear. t One-shot Capture button Copy and capture (project) the com[...]

23 3.Names and Functions of the Operation Screen !9 @0 @1 !6 !7 !8 When using the moderator function, install the software on the moderator’s computer. The function is the same as “NetworkModule Client” and on top of it, the moderator function is added. Activate “NetworkModule Moderator” from the application start menu or the shortcut on [...]

24[...]

Chapt er 4. Wir ed LAN Configurations 4 This chapter describes the preparation for Wired LAN setting with projectors and how to set the LAN environment. 25[...]

26 4. Wir ed LAN Configurations Setting Procedure Setting procedures and contents differ depending on the LAN installation location. When installing, consult your system administrator to set up the LAN appropriately. Connect the LAN cable to the LAN connection terminal of the projector. Netw or k Envir onment Settings Set the Wired LAN network thro[...]

27 4. Wired LAN Configurations 4. Press the SELECT button. LAN setting screen will appear and selected LAN settings will be displayed. Adjust each item to the setting environment. Consult your system administrator about the detailed settings. Adjust the figures with the Point ed buttons and move among the items with the Point 7 8 buttons. 5. After [...]

28 4. Wired LAN Configurations NetworkModule Client screen Error screen Confir ming the Oper ation Confirm that the projector has connected to the LAN properly. 1. Activate “NetworkModule Client” or “NetworkModule Moderator” which is installed into the computer connected to the LAN . 2. After appearing “NetworkModule searching” message,[...]

29 4. Wired LAN Configurations Click the Add NetworkModule button Enter IP Address screen Add NetworkModule screen When set up the projector where separated by the router and the segment is different; Projector will not be found nor displayed. In this case, the projector needs to be searched directly by the IP address. 1. Click the Add NetworkModul[...]

30 4. Wired LAN Configurations The User PIN code is to restrict the access from the networks to the projector. After setting the User PIN code, you need to enter it to operate the projector via the networks. 1. Select User PIN code, and press the SELECT button. The User PIN code screen will appear. 2. Set the User PIN code. Set the figures with the[...]

31 4. Wired LAN Configurations F act ory Def ault Setting of the Wir ed LAN SELECTED LAN Parameter LAN1 LAN2 LAN3 IP ADDRESS 169.254.100.100 192.168.100.100 192.168.100.100 SUBNET MASK 255.255.0.0 255.255.255.0 255.255.255.0 GATEWAY ADDRESS 255.255.255.255 255.255.255.255 255.255.255.255 DNS ADDRESS 255.255.255.255 255.255.255.255 255.255.255.255 I[...]

32[...]

Chapt er 5. Wir eless LAN Configurations 5 This chapter describes the preparation for Wireless LAN setting with projectors and how to set the LAN environment. To operate via Wireless LAN, attach the USB Wireless LAN Adapter to the projector. The setting procedures and configurations differ depending on the LAN installation location. Consult your sy[...]

34 5. Wir eless LAN Configurations Insert the USB Wireless LAN Adapter into the USB terminal of the projector. Inserting the adapter after verifying the shape of the connector in order not to break the terminal. CAUTION: Use specified USB Wireless LAN Adapter. If you use other product, the projector will not be operated properly. Set ting Procedur [...]

35 5. Wireless LAN Configurations 3. Press the Point button then the “Please wait...” message will appear and switching operation will start. Switching will take a while and after completing the operation the message will disappear. During the switching period, the projector cannot be operated. 4. Press the SELECT button. LAN setting screen wil[...]

36 5. Wireless LAN Configurations With this setting, you do not need any complex LAN setting procedures. The LAN mode will be AdHoc IEEE802.11b. CAUTION: This function can be used only when logged in by Administrative right with Windows XP, and cannot be used with Windows 98SE/Me, Windows 2000. Windows XP should be Service Pack 1 or later version. [...]

37 5. Wireless LAN Configurations Computer environment and Wireless LAN connection; Wireless LAN with Easy setting connection will be made via AdHoc IEEE802.11b mode. For setting contents, refer to “Wireless LAN factory default settings” (p.38). With the Easy setting, computer’s LAN environment setting will be switched to the settings on page[...]

38 5. Wireless LAN Configurations Wir eless LAN F actory Def ault Settings Selected LAN Setting Items LAN4 LAN5 SIMPLE IP ADDRESS 169.254.100.100 192.168.100.100 169.254. * . * SUBNETMASK 255.255.0.0 255.255.255.0 255.255.0.0 GATEWAY ADDRESS 255.255.255.255 255.255.255.255 255.255.255.255 IP CONFIGURATION MANUAL DHCP MANUAL INTERRUPT CONNECTION PER[...]

Chapt er 6. Configur ations with Bro wser 6 The projector can be set, controlled and operated via the browser. Caution: When operating the projector with the browser, connect the projector to the computer with Wired or Wireless LAN. Complete the connection in advance. The browser can set or operate: • LAN setting Configure Wired/Wireless LAN envi[...]

40 6. Configur ations with Br owser To operate by the browser, you need to prepare and configure the environment. Check the environment of the browser and configure to operate the projector. Browser is required to support the following version. Microsoft: Internet Explorer Ver.4.0 or later Netscape Communications: Netscape Communicator Ver6.0 or la[...]

41 Star ting up the Bro wser Advanced Settings button Advanced Settings Configure NetworkModule button Network Projector List 1. Turn on the projector. 2. Activate NetworkModule Client (or NetworkModule Moderator). 3. Select the projector to set from the Network Projector List. (Selected projector will be blue.) 4. Click the Advanced settings butto[...]

42 6. Configurations with Browser Display the current setting environment. The contents differ depending on Wired or Wireless LAN environment. Screen of Wireless LAN Screen of Wired LAN Information[...]

43 6. Configurations with Browser * Not shown at Wired LAN setting. Parameter Description Firmware Version ............................Show the firmware version of the projector. Boot ROM Version ..........................Show the boot ROM version of the projector. Hardware Address ..........................Show the MAC address. IP Address ........[...]

44 6. Configurations with Browser Quic k Setup Set up minimum required items for operating the projector. These settings can also be done in “Advanced Setup” (pp.46–52). If you have set the items from the advanced setup, Quick Setup is not necessary. Setting items differ depending on the Wireless LAN and Wired LAN. To reflect the settings on [...]

45 6. Configurations with Browser * Not displayed at Wired LAN setting. Parameter Description Projector ........................................Name each projector to distinguish it from other projectors (up to 32 one-byte characters). The name set here will be displayed on the Network Projector List in the application operation screen. IP Configur[...]

46 6. Configurations with Browser Parameter Description IP Configuration Method ........ A desired IP address setup method is selected from “Manual”, “DHCP”, and “BOOTP”. If “DHCP” or “BOOTP” is selected, the IP address is obtained automatically as “DHCP client” or “BOOTP client”. At this time, it is necessary that the D[...]

47 6. Configurations with Browser Wireless related items can be configured on this screen. This screen will not be displayed at Wired LAN setting. Parameter Description Wireless Mode ................................Select the Communication standard 802.11b or 802.11b.g Network Type .................................... Select either “Infrastructur[...]

48 6. Configurations with Browser The projector has a function to send e-mails to inform its operating condition to the administrators or users. This function can not be used for Wireless AdHoc mode. This function is available only for Wired or Wireless LAN infrastructure mode. Parameter Description SMTP Server ..................................Ent[...]

49 6. Configurations with Browser Set the Admin Password to prevent unauthorized person from changing the settings of the projector. At the factory settings, the Admin Password is not set. Parameter Description Enter Current Admin Password ......Enter the currently set admin password. The password you have entered is displayed as “ ●●●●?[...]

50 6. Configurations with Browser With this screen, you can set the User PIN code to transfer the image to the projector and to activate PJ Controller. You can set different PIN code as you set for Admin Password (p.49). When you reset the User PIN code, you do not need to enter the current PIN code. At the factory setting, the User PIN code is not[...]

51 6. Configurations with Browser Moderator Login Password To use the Moderator function, you need to set the Moderator Login password here. For operating the Moderator function, a Moderator Login password is required on this screen. When resetting the Moderator Login password, you do not need to enter the current Moderator Login password. Default [...]

52 6. Configurations with Browser You can set the name to the projector. The set name will be displayed on the Network Projector List of the application operating screen. Parameter Description Projector ....................................Name a projector to distinguish it from other projectors (up to 32 characters). The name set here will be displ[...]

53 6. Configurations with Browser Chang e Configuration Set Select a LAN settings from LAN1–LAN3, Off, LAN4, LAN5, and SIMPLE. With this screen, you can also confirm some settings (Projector name, IP Configuration Method, IP Address, Wireless Mode, Network Type, Channel, SSID, WEP Security). Depending on Wireless or Wired input, setting items wil[...]

54 6. Configurations with Browser Restar t You can restart the projector on this screen. To enable the new settings, the projector has to be restarted. Click “RESTART”. Parameter Description RESTART button ............................Click this button when you restart the projector after completing the settings. CANCEL button ..................[...]

Chapt er 7. Pr oject the Image via the Netw or ks 7 Project the image on the computer screen by operating the projector which is connected to the networks. 55[...]

56 7. Pr oject the Imag e via the Networ ks Network Projector List Real time Capture button (While capturing the image, the button will become Stop Capture button.) One-shot Capture button 1. Activate NetworkModule Client (Participants) or NetworkModule Moderator (Moderator). 2. Adjust the projector input to the selected network (Wired or Wireless)[...]

Chapt er 8. Use the Moderat or Function 8 With Moderator function, the moderator can project the participants’ computer screen through the projector in meetings or in classes. 57[...]

58 8. Use the Moder ator F unction Moder ator F unction This function is useful for a moderator or a teacher to conduct a meeting or a class, where all the participants including the moderator (teacher) are assigned a computer, to project images from each participant’s computer. A moderator (teacher) has the right to decide which computer image t[...]

59 8. Use the Moderator Function Network Projector List Exit moderator status button Moderator login button Set Session Password button Stop Remote Capture button Start Remote Capture button First, follow the procedure in “2. Setup Procedure” ➔ “Step 1–3” (p.16) and confirm that the setting status is set as written below. • Client app[...]

60 8. Use the Moderator Function 1. Turn on the Moderator’s computer and activate the moderator’s application. Turn on the each client’s computer and activate each of the applications. Registration of the Moderator 2. The moderator sets the Moderator Login password to the projector. When operating multiple projectors, set passwords to all the[...]

61 8. Use the Moderator Function Registration of the Clients (Participants) 6. Select the projector (Selected projector will be blue.) in the group from the client screen. (Moderator’s projector will be pink.) Click the Join the moderated session button. 7. Set session password screen will appear. Enter the password registered by a moderator (Bei[...]

62 8. Use the Moderator Function 1. Select a projector which is registered as a moderator from the moderator screen. 2. Click the Exit moderator status button. Selected projector will be unregistered as a moderator. When there are multiple projectors to unregister, repeat the procedure for each projector. The moderator cannot unregister while an im[...]

Chapt er 9 Project images on a FTP server, which is on the same LAN with the projector, through the projector by operating a projector or a computer. First, check if the projector and the computer are connected to the networks correctly with Wired or Wireless, to project the image properly. 63 9. How t o Use Networ k Viewer[...]

64 9. Ho w to Use Netw or k V iewer Computer Access Point Server Instruction Server Instruction FTP Server Computer Server Instruction Image Data Network Projector Wireless Communication Mode : Infrastructure Computer Wireless Communication Mode: Infrastructure Network Projector Wireless Communication Mode: AdHoc Computer Wireless Communication Mod[...]

65 9. How to Use Network Viewer Computer Server Instruction Image Data FTP Server Computer Network Projector Wired LAN Connection ■ Wired LAN Communication Mode Procedures for projecting the images on the FTP server are as follows. 1. Information about the FTP server, which provides images, is sent from the computer to the projector and the infor[...]

66 9. How to Use Network Viewer PJ Controller button Operation can be made with any of 1) PJ Controller, 2) Browser, or 3) Projector. When operating with the projector, first, set the FTP server which provides images with 1) PJ Controller or 2) Browser. Operate as follows. 1) Operating with the PJ Controller 1. Select the projector input (Wired /Wi[...]

67 9. How to Use Network Viewer 5. Specify the FTP server to provide image data Host Name.... Enter IP address of the server. Folder Path.... Specify the directory where image data are stored. When the image data is in the root directory, just “/” will be displayed. When the image data is in a specified directory, put slashes”/” between dir[...]

68 9. How to Use Network Viewer 2) Operating with the Browser 1. Select “Wireless” for Wireless LAN and “Wired” for Wired LAN from the input menu of the projector. Activate “NetworkModule Client” or “NetworkModule Moderator”. Operating directly from the browser is also possible. In this case, enter the projector IP address directly [...]

69 9. How to Use Network Viewer 4. Specify the FTP server to provide image data Host Name.... ..........Enter the IP address of the server. Folder Path.... ..........Specify the directory where image data are stored. When the image data is in the root directory, just “/” is displayed. When the image data is in a specified directory, put slashes[...]

70 9. How to Use Network Viewer [Wired LAN] [Wireless LAN] Pointer Wired Viewer Selected mark 3) Operating with the projector Before operating the Network Viewer from the projector, the FTP server needs to be configured by PJ Controller or browser in advance. Regarding the configuration of the FTP server, refer to “1) Operating with the PJ Contro[...]

71 9. How to Use Network Viewer 4. Select, execute, and stop the mode of image replay. Move the red arrow pointer to the item you wish to choose. Using Point buttons and SELECT button of the projector, configure or execute each item. Auto ........................Play images and stop playing according to following configurations. Second ............[...]

72[...]

Chapt er 10 .H ow to Use the PJ Contr oller 10 Control the projector operation on the network. PJ Controller works for: • Operating the projector • Operating the Network viewer • Controlling the projector Monitor the operation status of the projector in real time. Send an e-mail to the administrator about operation status of the projector. ?[...]

74 10 .H ow t o Use the PJ Contr oller Ho w to Oper ate This operation requires that the projector is set correctly on the network and the image in the computer is properly displayed from the projector with “NetworkModule Client” or “NetworkModule Moderator” applications on the computer. Activate the PJ Controller. 1. Activate the “Networ[...]

75 10. How to Use the PJ Controller Initial Set tings Before using the PJ Controller function, initial setting is required. 1. Select Initial Setting from the main menu and configure each item. Parameter Description Language ........................................ Select a desired language from the pull-down menu, and click “Set”. Temperature [...]

76 E-mail Set ting The projector has a function to send an e-mail to inform its operating condition to the administrator or users. Select E-mail Setting from the main menu and configure each item as follows: 1. Registering E-mail Address ✳ The SMTP server is a server for sending E-mail. Please contact your network administrator to have this SMTP [...]

77 10. How to Use the PJ Controller 2. Check Option items Check the conditions where you would choose the projector to send an alert message. Regarding the alert message, see samples below. 3. Enter the message to attach the E-mail. The message typed here will be attached to the alert message. Samples of Alert Message * When the internal temperatur[...]

78 P ow er & Status Click “Power & Status” on the main menu and configure each item. 1. Turning on/off the projector Click Standby/ON buttons. When clicking the Standby button, the confirmation message will appear. Click OK to turn off the projector. CAUTION: Projector cannot be turned on for approximately 90 seconds after it being turn[...]

79 10. How to Use the PJ Controller 2. Check the status of the projector The following items can be checked on the Power & Status screen. Parameter Description Accumulated lamp-use time............Display the accumulated time of lamp use in hour increment. Accumulated projector-use time ....Display the accumulated time of projector use in hour [...]

80 Contr ol When you select Control from the main menu, Control Menu will appear at the bottom of the screen. Using this menu, you can adjust or configure the projector. Note:Control items displayed on this screen are varied depending on the input source or product model of the projector. So the figures shown in this section may be different from t[...]

81 10. How to Use the PJ Controller PC adjustment This feature optimizes the signal from the connected computer to display the screen. ✳ PC adjustment screen is displayed only when Computer1 (Analog) or Computer 2 (RGB) is selected for the input source. Parameter Description Current Mode ..................Display computer mode Auto PC adjustment.[...]

82 SYSTEM Adjustment On this screen, you can select the color system and scan mode for the video signal. This screen is displayed only when Video (Video/Component) is selected for the input source of the projector. Depending on the signal, the screen is varied as follows. Component Input VIDEO/S-VIDEO Input Parameter Description System Adjustment .[...]

83 10. How to Use the PJ Controller Image Adjustment On this screen, you can adjust the image projected from the projector. Select an Image Adjustment Mode from the pull- down menu and click Set button. The items displayed on this screen is automatically changed according to the input signal. Click 7 8 buttons to adjust the value. Every time you ch[...]

84 Screen You can select a screen mode on this screen. The items displayed on this screen is automatically changed according to the input signal. ✳ If “1080i”, 1035i”, or “720p” scan mode is selected from “System Adjustment” (Y, Pb/Cb, Pr/Cr input only) setting in “SYSTEM” screen, you cannot configure “Screen” settings. Soun[...]

85 10. How to Use the PJ Controller Setting On this screen, you can configure the projector. Refer to the next page for each item and description. The items displayed on this screen are varied according to the functions provided to the projector.[...]

86 Parameter Description Language ..........................Select the desired language from the pull-down menu. Auto Setup ........................Automatically set PC adjustment and correct keystone distortion. Auto PC Adjust. ...Select “On” to automatically set the PC adjustment. Auto Keystone ............Select Auto to automatically correct[...]

87 10. How to Use the PJ Controller Service Items on this screen are used for maintenance of the projector. ✳ If you select Wired, Wireless Computer1 (Analog/Digital) or Computer 2 (RGB) for the input source, these items are not shown. Save Actual Adjustment On this screen, you can save and load the setting. The items you can save are as follows:[...]

88 2. Select Set Number and name the setting Select the Set Number you wish to store the adjustment from the pull-down menu. Enter the name of the setting in the Memo field. 3. Save the setting (Set) Click Save button to save the adjustment. Enter the name of the setting 10. How to Use the PJ Controller Loading the Set Click the pull-down menu of L[...]

89 10. How to Use the PJ Controller Multi Contr ol PJ Controller/ Multi Control button The illustration on the button will become two projectors. With this function, multiple projectors can be operated simultaneously. You can operate up to 64 projectors at the same time. With this function, you can also operate the projector which is attached a Mul[...]

90 Parameter Description Projector Power ................ Turn on or off the projector. ✳ When using the Multi Control function, set “Normal” from “Setting menu” ➔ “Standby mode”. If selecting “Eco”, you cannot turn on the projector again after turning off. Input..................................Select projector input. Image ...[...]

Chapt er 11 .A ppendix 11 - Troubleshooting - Terminology - Setting up IP Address with arp + ping Command 91[...]

92 11 . A p pendix If you have any trouble in setup or operation of the projector, refer to the troubleshooting items and check the relevant matters described. Tr oubleshooting ■ The computer cannot connect projectors. Wired LAN Is the LAN cable connected to the projector properly? Are the Link lamp and Access lamp of the LAN terminal lighting pr[...]

93 11. Appendix Infrastructure Mode: When selecting LAN5 (factory default setting) Check each item below in the Wireless Setting menu of the projector as follows: *IP Address ..................No setting is required. *Sub net ......................Should be same as the setting of the access point *Gateway......................Should be same as the [...]

94 11. Appendix ■ Cannot start up the browser Is connection between PC and the projector with NetworkModule Client (or NetworkModule Moderator) established? No ........Check settings for Wireless/Wired LAN. Yes ....Check settings of the proxy setting at browser. Refer to “6. Browser Configuration” (p.40). ■ Although connection between PC an[...]

95 11. Appendix DHCP server (Dynamic Host Configuration Protocol) It is necessary to set an IP address for each computer or equivalent equipment when establishing a network by TCP/IP. If there exists DHCP server on the network, it will assign IP addresses to client computers every time they request it. If there exists equipment with DHCP server fun[...]

96 11. Appendix Set ting up the IP address with “ar p” + “ping”command You can use " arp " and " ping " command from Command Prompt to assign an IP address to your projector. 1. Start up projector and configure the Wired or Wireless LAN to communicate with the computer. 2. From Windows “Start” menu, click “Run”. [...]

97 11. Appendix Configur ing WEP secur ity with the pr ojector Configure WEP security with the projector by following the steps below. After configuring the network in “5. Wireless LAN Configurations” (pp.34–36), select “Next” in the LAN setting screen (see page 35). The WEP configuration screen appears. Refer to “6. Configurations with[...]

98 11. Appendix 2. Select “Key index”. Use the Point ed buttons choose the HEX or ASCII key. The four (#1–#4) kinds of WEP keys can be configured. Use the Point 7 8 buttons to move to the right frame; use the Point ed buttons to select a WEP key number (#1–#4). 3. Use the Point 7 8 buttons to select the Type field of the WEP key number that[...]

© 2007 Eiki International, Inc. KM6BC[...]