Eiki MD13NET manuale d’uso

Network Board POA-MD13NET OWNER’S MANUAL INSTALLATION and OPERATION of the Network Board This Network Board is an optional product to control and set up a projector via a network. Mount this product to the projector and connect a network cable. By accessing the con- nected projector using the web browser on your computer, the projector can be con[...]

2 Preparation Compliances Federal Communication Commission Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This [...]

3 Network Board OWNER’S MANUAL Preparation ENGLISH Expression/Abbreviation The following abbreviations may appear in this manual: ● Windows 95, Windows 98, Windows 2000, Windows Me, Windows XP, Windows NT4.0 ➜ Windows ● Macintosh, Power Macintosh ➜ Macintosh ● Mac OS 8 or later ➜ Mac OS The word “projector” found in this manual me[...]

4 Contents Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Flow of installation . . . . . . . . . . . . . . . . . . . . . . . .[...]

5 Network Board OWNER’S MANUAL Contents ENGLISH System Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41 Image Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42 Save a image adjustment value . . . . . . . . . . . . . . . . . . . . . . .43 Load a image mode . . . . . . . . . . . . . . . . . .[...]

6 Preparation Features W eb Management function With this function, you can monitor projector functions such as power status, lamp status, input mode, signal condition, lamp-use time, etc. through the network by using the web browser installed on your computer. E-Mail Alert function Projector (Network Board) sends messages to the registered e-mail [...]

7 Network Board OWNER’S MANUAL Features ENGLISH Multi-control function A single computer can control and set up the multiple computers at the same time. Automatic On/Of f using Timer function Automatically turn on or off the projectors at specified date/day and time by using the clock function. Control port r eady for external equipment via netwo[...]

8 Preparation Operating Environment To perform the management and setting up the projector using this product, the envi- ronment described below is required. Operating System Windows 95 / Windows 98 / Windows 2000 / Windows Me / Windows NT / Windows XP Mac OS 8.0 or later Network Network must handle Ethernet correctly and accept TCP/IP protocol. Co[...]

Installation 1 9 Network Board OWNER’S MANUAL ENGLISH[...]

10 Installation The following are instructions for attaching this product to the projector and connect- ing it to the network. Please review the entire procedure to become familiar with it. Chec k package (p.11) 1 Installation (p.12-14) 2 Netw ork configuration (p.15-24) 3 Setting up is completed. Please check the contents of a package. This produc[...]

11 Network Board OWNER’S MANUAL Name and function of each part ENGLISH Name and function of each part Serial port This is used when controlling the external equipment via the net- work. (p.61) LAN port Connecting the LAN cable. (p.13) LINK indicator (Orange) This illuminates orange when the network board is connected to the network correctly. ✐[...]

12 Installation [1] Mounting 1 Turn the Mains switch off. 2 Remove 2 screws on a board from any of the slots 1 to 4*, and then pull the board out from the projector. * The number of the slots may differ from the actual depend- ing on type of the projector. 3 Put the Board into the board slot along the guide. Mount the board connector into the socke[...]

13 Network Board OWNER’S MANUAL Connection of LAN cable ENGLISH [2] Connection of LAN cable To connect to the network, it is required to use the UTP (Unshielded Twisted Pair) straight cable with RJ-45 plug. There are two different types of cables depending on whether the network is constructed with 10Base-T or 100Base-TX. Prepare the Hub (10Base-[...]

14 Installation [3] Confirmation of network menu activity When installing this product to the projector, the network on-screen menu items for this product are activated automatically. If not activated, the product may not have been installed correctly . Please check chapter “Mounting” on page 12. Turn on the projector and display the menu on th[...]

15 Network Board OWNER’S MANUAL Network configuration ENGLISH Configure the network with the projector Tu rn the projector on and display the netw or k setting menu on the screen. Configure the network through the projector's menu. Restar t the Network Board Configure the network with computer T emporarily set up the computer's network [...]

16 Installation Configure the network with the pr ojector This example explains how to set the following configuration. IP Address : 192.168.1.201 Subnet Mask : 255.255.255.0 Default Gateway : 192.168.1.1 DNS : 0.0.0.0 A 1 Selection of network menu [Network] Turn on the projector and display the menu on the screen. Select the Network icon from the [...]

17 Network Board OWNER’S MANUAL Network configuration ENGLISH How to enter the numbers To move the selection and change the values, use the pointers ▲ / ▼ // on the projector or on the remote control handset. The / keys are used to move the selection item. The ▲ / ▼ keys are used to change the number value. ▲ ▲ ▲ ▲ 3 Restart the N[...]

18 Installation Configure the network with the computer This example explains how to set the following configuration. The default network configuration is set as follows. Make sure that the projector is connected to the network and then turn the projector on. 1 Temporarily* 1 set up your computer network configuration to the same IP network number [...]

19 Network Board OWNER’S MANUAL Network configuration ENGLISH ✐ If you use a cable to connect the projector and computer directly, without using a hub, you must use a UTP cross cable. In this case, you cannot access the login page if the setting of web browser is set to “Use proxy server”. It must be changed to the “Not use proxy serv- er[...]

20 Installation Configure the network of computer When you use the projector through the network, the IP address of the pro- jector must be the same IP network number of the existing network. Also it is required to use the same IP network number of the computer to set up the projec- tor. In the network included with the gateway (router), it must be[...]

21 Network Board OWNER’S MANUAL Configure the network of computer ENGLISH W indows 2000/NT4.0 This example explains how to set the following network address. 1 Select the Network and Dial-up Connections menu from [Start] - [Settings] menu. 2 Click the Local Area Connection icon with right button of the mouse and then select the Properties menu fr[...]

22 Installation W indows XP This example explains how to set the following network address. 1 Select the Control Panel menu from the [Start] menu. Click the Network and Internet Connection and then click the Network on the control panel. 2 Click the Local Area Connection icon with right button of the mouse and then select the Property menu. The rig[...]

23 Network Board OWNER’S MANUAL Configure the network of computer ENGLISH Macintosh This example explains how to set the following network address. 1 Select TCP/IP * 1 menu from the [Apple] - [Control Panel] menu. 2 Select Ethernet from the “Connect via” pull-down menu and Manually from the “Configure” pull-down menu of the TCP/IP Control[...]

24 Installation Notice about system construction For installation of multiple projectors into the same network with Network Board. Do not install multiple projectors with Network Boards that have their default net- work settings to the same network. The use of the Network Boards which have the default IP address set to the same network settings wil[...]

Basic Setting and Operation 25 Network Board OWNER’S MANUAL ENGLISH 2[...]

26 Basic Setting and Operation This chapter describes basic operations and settings for controlling the projector via a network using this product. It is required that computer and projector are connected to the network and the network address be properly configured. Login the setting page of the projector 1 Enter the IP address Launch the web brow[...]

27 Network Board OWNER’S MANUAL Login the setting page of the projector ENGLISH 3 Display of main setting page The following main setting page will be displayed according to your display mode selection. Perform the various kinds of setting through this page. Click on the linked text to display the control and setting pages. Setting page Displays [...]

28 Basic Setting and Operation Returns to the display mode selection page. x Main setting page in the Text Mode display Main menu For selection of control and setting items of the projector. Displays sub menu and status of selected items when clicking the linked text. Setting page number browses pages by click- ing the linked number. Setting page D[...]

29 Network Board OWNER’S MANUAL Initial Settings ENGLISH Initial Settings After installing this product to the projector, perform the following basic ini- tial setting. Click on the Initial linked text on the main menu to display the initial setting page. The Languages, Date/Time and Password can be set in this page. The model name of the project[...]

30 Basic Setting and Operation 2 Password Setting This page is to set the password to restrict the access from an unauthorized per- son through the network. Enter the password onto the text box and press the Set button. The Network Board begins restarting and it takes about 40 seconds. Close (Quit) the web browser and access to the login page again[...]

31 Network Board OWNER’S MANUAL Network Configuration ENGLISH Network Configuration Click on the Network Setting linked text on the main menu. The following setting page is displayed. This page is to set the IP Address, Subnet Mask, Default gateway, DNS (Domain Name Server) and projector name. 1 Configure the network The IP address and Subnet Mas[...]

32 Basic Setting and Operation E-mail Setting This product has an E-mail function which can send an alert message to users or an administrator if it detects an abnormality on the projector or run out of the life span of the lamp. Click on the E-Mail Setting linked text on the main menu and follow the below steps. 1 SMTP Server* 1 Type the E-mail ad[...]

33 Network Board OWNER’S MANUAL E-Main Setting ENGLISH *1 The SMTP server is a server for sending E-mail. Please contact your network administrator to have this SMTP server address. ✐ To use the E-mail function, it must be set the DNS address on the Network Setting page correctly. ✐ You cannot use this E-mail function if the DNS server and SM[...]

34 Basic Setting and Operation Examples: Type and contents of alert mail When the projector has an abnormality, the following alert messages are sent to the registered E-mail address according to your selected condition. Administrator or user can take an efficient action quickly by receiving this massage. This is very useful to maintain and service[...]

35 Network Board OWNER’S MANUAL ENGLISH Contr olling the Projector 3[...]

36 Controlling the Pr ojector ✐ The projector is not turned on for about 90 seconds after switching into the standby mode. After the power status indicator on the control page changes from “On Cooling down” to “OFF”, then try to turn on the projector with On button. ✐ The web browser checks and updates projector's condition every 2[...]

The icons [A] and [B] represent the sensors located in the projector as follows: [A]: Surrounding temperature of the projector * [B]: Internal temperature of the projector * The indicated peripheral temperature of the projector is a little higher than actual surrounding temperature. 37 Network Board OWNER’S MANUAL Check the status of projector EN[...]

Select a source mode with pull-down menu. Select a slot with radio buttons. Mounted Board name 38 Controlling the Projector Control the pr ojector The control menus are displayed on the upper side of the page. When you click each control icon, the control page is displayed according to the control menu you select- ed. The setting method differs dep[...]

39 Control the Projector ENGLISH PC Adjustment This function is to adjust the signal from the computer connected to the projector to obtain the proper picture image on the screen. Click on the page number linked texts to change the setting pages. ✐ These parameters will appear only when the analog computer input mode is selected. Item Description[...]

40 Controlling the Projector Save a Set 1 Decide your desired PC adjustment values through the PC Adjustment pages “1”to “2”. 2 Display the page “3” and select a mode number with the pull-down menu button of the Save to . Type a memo into the Memo text area for simple description of your selected number. 3 Register by pressing the Set b[...]

41 Network Board OWNER’S MANUAL Control the Projector ENGLISH System Adjustment This function is to select the color system of video signal or scanning sys- tem of component signal input to the projector. Select a system with the radio buttons to match the color system or scanning system of input source, and then press the Set button. The display[...]

42 Controlling the Projector Image Adjustment This function is to adjust the projected picture image and set the image mode. For selection of image mode, select a desired image mode with the Image Adjustment Mode pull-down menu button and then press the Set button. The setting items are switched automatically according to selected input mode, compu[...]

43 Network Board OWNER’S MANUAL Control the Projector ENGLISH Save a image adjustment value 1 Decide your desired image adjustment value through the image adjustment pages “1” to “3”. 2 Display the page “3” and select the desired image number with the pull- down menu of the Save Adjustment . 3 Register by pressing the Set button. To r[...]

44 Controlling the Projector Screen Adjustment This function is to adjust the screen mode of the projector. The setting items are switched automatically according to selected input mode, com- puter or video input. Sound Adjustment This function is to adjust the sound of the projector. The values in each text box represent the current control value [...]

45 Network Board OWNER’S MANUAL Control the Projector ENGLISH Setting This function is to set up the projector. Click on the page number “1” to “5” linked texts to change the setting pages. Item Description Language ..........Changes the on-screen menu language of the projector. Keystone ............Corrects the keystone distor- tion of t[...]

46 Controlling the Projector Item Description Remote Control ...... Sets one of 2 types remote control codes. Lamp Counter Reset ................Resets the lamp use-time. Reset when replaced lamp. P-TIMER ............Used to display the timer on the screen. The status is changed as OFF -> STOP -> ON when this button is pressed repeatedly. Ite[...]

47 Network Board OWNER’S MANUAL Control the Projector ENGLISH How to set the Timer This function is used to turn the projector off or on at a pro- grammed day/date and time. Follow the below steps for set- ting. 1 Set a day or date To set the timer event at same time everyday, select “day” entry with radio button and then select desired day w[...]

48 Controlling the Projector ✐ The timer operates by using the clock function provided in this product. Before setting the timer, please confirm that the current date and time are set correctly. Timer and clock func- tions are functioning using a lithium battery provided in this product. When the battery runs down, the clock and timer functions w[...]

49 Network Board OWNER’S MANUAL Control the Projector ENGLISH Service This function sets parameters for service items of the projector. As these service items are used mainly for maintenance, please use the default set- ting unless a change is needed. ✐ The adjustments of H/V Area and Position are effective only for video input mode. These adju[...]

50 Controlling the Projector Save Actual Adjustment This function is to save and load the control values of the projector. The storable control items are Input, PC, System, Image and Screen controls, and these control items differ from each selected input mode and functions of the projector you use. 1 Adjust and set the controls Set the controls pr[...]

51 Network Board OWNER’S MANUAL Control the Projector ENGLISH Check the Save items Browse pages by clicking on the page numbers and check each setting status. The pages for the save items are constructed by 7 pages. The contents of the pages may differ from the actual depending on the selected input mode and the function of the projector.[...]

52 Controlling the Projector Load a control set Select your desired set number with the pull-down menu button of the Load Setting No. and then press the Set button. The setting values of the selected set number are applied to the current settings. Example of setting ✐ If the contents of the saved set are not match for the slot equipped on the pro[...]

53 Network Board OWNER’S MANUAL Control the projector’s menu ENGLISH Control the pr ojector's menu Click on the Menu linked text on the main menu. The following menu con- trol page is displayed. This page is to control the on-screen display menu of the projector. Item Description Display Menu ....To switch the on-screen display menu on or [...]

54 Make a memo Make a memo Select the Memo setting page by clicking on the Memo linked text on the main menu. The following setting page is displayed. It is convenient to use as a memo for the simple description where the projector is placed in. This note will be displayed on the login page. The saved memo is displayed on the login page.[...]

Contr olling the Multi-Projectors 55 Network Board OWNER’S MANUAL ENGLISH 4[...]

56 Multi-Control This function enables control of multiple projectors equipped with the Network Boards that are connected to the network at the same time. Click on the Multi Control linked text on the main menu to display the control page. Note: To control the multiple projectors, each projector must has the same password. 3rd floor Meeting Rooms 5[...]

57 Network Board OWNER’S MANUAL Control the Multi-Projectors ENGLISH *1 Normally, the projector in the network is recognized with the IP address. This product allows you to name the projector instead of the IP address. By registering the projector’s nickname like “MeetingRoom101”, it can be managed and recognized easily. If you use the DNS [...]

58 Controlling the Multi-Projectors Exclude/Add/Delete a projec- tor To change the mode of the registered pro- jectors, Select a mode with the pull-down menu button under the IP address of the target projector and then press the Set button. Status If some of the registered projectors are deactivated by some means (such as dis- connecting the power [...]

59 Network Board OWNER’S MANUAL Control the Multi-Projectors ENGLISH Load and apply the setting value The control sets saved for each projector (p. 50) can be used while the multi-con- trolled projectors function is being used. Select a setting number from the item Load Setting No. with the pull-down menu button and then press the Set button. The[...]

60 Controlling the Multi-Projectors Control multi-pr ojectors at the same time The valid controls are shown below. Please refer to chapter “Control the Projector” on page 33 for further control and description. When the control button or setting button is pressed, the registered projectors for the multi-control are controlled at the same time. [...]

Use of Serial Port 61 Network Board OWNER’S MANUAL ENGLISH 5[...]

62 Use of Serial Port This product provides with a serial control port (RS-232C) to control the external equipment which has an RC-232C port. This function allows exter- nal equipment to be controlled by the computer through the network and the projector can be controlled by the external serial controller. Before con- necting the external equipment[...]

63 Network Board OWNER’S MANUAL Use of Serial Port ENGLISH *1 This product will restart automatically when the “Port” or “Serial Control” is changed and it takes about 40 seconds. *2 The reserved port numbers are http (80), ftp (21), telnet (23), etc. The port no. 10000 is reserved to control the projector through the LAN port. ✐ Exclus[...]

RS-232C serial cable D VD Play er RS-232C serial cable 64 Use of Serial Port Example 2 Controlling a projector which is not on the network function through network. Control Examples Example 1 Controlling AV equipment through network[...]

65 Network Board OWNER’S MANUAL Control Examples ENGLISH Example 3 Controlling the projector with the serial controller through the serial port (RS-232C). Serial Controller RS-232C serial cable When connecting the peripheral equipment to this network board, you should notice the type of serial cables. At the factory shipping, the polarity of seri[...]

66 Use of Serial Port Use of T elnet You can control the equipment connected to the serial port on the network board and control projector itself by using the telnet application* 1 installed on your computer. The following is a control example of external equipment. The telnet application is required to use commands* 2 which control the external eq[...]

67 Network Board OWNER’S MANUAL Use of telnet ENGLISH 3 The following window will appear. Type as follows and then press the Connect button. Host name : 192.168.0.2 (type projector IP address) Port : telnet or 23 Terminal type : vt100 4 When communication is established, the word “PASSWORD:” appears on the window. Type the login password* for[...]

68 Use of Serial Port Control the pr ojector with T elnet This product allows you to control the projector by using the Telnet application. Normally, it is used to control the external equipment connected to the serial port and also control the projector itself by specifying the telnet port no.10000. Specify port no. 10000 as the right on the seria[...]

69 Network Board OWNER’S MANUAL ENGLISH Appendix:A 6 Connection examples Web browser setting Technical data[...]

70 Appendix Examples of Connection Peer-T o-Peer connection Connect the projector (PJ01) to the control computer (PC05) directly Projector Name: PJ01 IP Address : 192.168.0.2 Subnet Mask : 255.255.255.0 Default Gatew ay : 0.0.0.0 DNS : 0.0.0.0 Computer Name: PC10 IP Address : 192.168.0.10 Subnet Mask : 255.255.255.0 Default Gatew ay : DNS : Compute[...]

71 Network Board OWNER’S MANUAL Examples of connection ENGLISH The gateway (Router) installed in the network Connect the projector (PJ01) to the control computer (PC05) via the gateway. To another network Network Group: 192.168.200.0 Network Group: 192.168.10.0 Projector Name: PJ01 IP Address : 192.168.200.15 Subnet Mask : 255.255.255.0 Default G[...]

72 Appendix W eb browser setting This product is designed enable the projector to be set up and controlled from an Internet web browser. Depending on the preference settings of the web browser, some control functions may not be available. Please make sure that the following functions are set up properly in the web browser. Active Script/JavaScript [...]

73 Network Board OWNER’S MANUAL Appendix ENGLISH Setting examples: OS/Browsers W indows 95/98 Internet Explorer v.5.5 ActiveScript setting Select the I nternet Options menu from the Tool menu on the web browser and then select Security tab and press the Customize Level… button. On the security setting window, scroll down and find the Scripting [...]

74 Appendix Proxy setting Select the Internet Options menu from the Tool menu on the web browser and then select Connection tab and press the LAN Settings button. Properly set up your web browser's the proxy server settings according to the local area network environment to which the projector is connected. - Using proxy server To use an exter[...]

75 Network Board OWNER’S MANUAL Appendix ENGLISH Netscape Navigator v.4.7 JavaScript Setting Select the Preference menu from the Edit menu on the web browser and then select the item Advanced in the Category column. Make sure that the Enable JavaScript is checked.[...]

76 Appendix Proxy setting Select the Preference menu from the Edit menu on the web browser and then select the item Advanced/Proxies in the Category column. Properly set up your web browser's the proxy server settings according to the local area network environ- ment to which the projector is connected. - Using proxy server When you use an ext[...]

77 Network Board OWNER’S MANUAL Appendix ENGLISH Mac OS 8.6 Internet Explorer v.5.0 ActiveScript setting Select the Preference menu from the Edit menu on the web browser and then select Web Content under the Web Browser heading the preference settings win- dow. Make sure that the Enable scripting is checked in the Active Content column.[...]

78 Appendix Proxy setting Select the Preference menu from the Edit menu on the web browser and then select Proxies under the Network heading the preference settings window. Properly set up your web browser's the proxy server settings according to the local area network envi- ronment to which the projector is connected. - Using proxy server Whe[...]

79 Network Board OWNER’S MANUAL Appendix ENGLISH Netscape Navigator v.4.7 JavaScript Setting Select the Preference menu from the Edit menu on the web browser and then select the item Advanced in the Category column. Make sure that Enable JavaScript is checked.[...]

80 Appendix Proxy setting Select the Preference menu from the Edit menu on the web browser and then select Proxies under the Advanced heading in the Category column. Properly set up your web browser's the proxy server settings according to the local area network environment to which the projector is connected. - Using proxy server When you use[...]

81 Network Board OWNER’S MANUAL Specifications ENGLISH Product specification Type ......................................Network Board LAN interface ........................Applicant regulation IEEE802.3 (10Base-T) IEEE802.3u (100Base-TX) Data transfer speed 10Mbps/100Mbps data transfer mode Half duplex/Full Duplex Terminal 8-pin modular (RJ-45) N[...]

82 Appendix LAN port specification Port Specification Serial port specification pin No. Signal Function 1 TX+ Transfer data (+) 2 TX- Transfer data (-) 3 RD+ Receive data (+) 4 (not used) 5 (not used) 6 RD- Receive data (-) 7 (not used) 8 (not used) 12 3 4 5678 8-pin modular connector (RJ-45) Pin No. Signal Name Socket Side A Side B 1C D - 2 RXD TX[...]

83 Network Board OWNER’S MANUAL ENGLISH Appendix:B FA Q[...]

84 Appendix FA Q Why doesn’t the setting page appear in my web browser? F ollowing causes are possible. Please check them. 1. The projector is not connected to the network. Check LED indicators status (p.11). - Check the connection of LAN cable if the LINK indicator does not illuminate orange. - Check the network configuration of the projector if[...]

85 Network Board OWNER’S MANUAL Appendix ENGLISH 3. Enter the projector’s IP address [192.168.0.2] at the “Address” column on the Web browser. [Note] Make sure that the proxy setting of your web browser is set to “Not use a proxy server”. See further information on page 72. 4. If the login page appears, this product is operating properl[...]

86 Appendix How can I install several projectors equipped with the Network Board? Install and configure network one by one to avoid the IP address collision each other. (p.24) To configure the IP address please see chapter “Network configuration” on page 15. How many projectors can I control with multi-control function? It has been designed to [...]

87 Network Board OWNER’S MANUAL Appendix ENGLISH Why can't I change the controls in the setting page with web browser? Please make sure the projector is turned on. If it is in the standby mode, the setting is not effective to the projector. To control the projector with a web browser, the projector must be in the powered-on condition. Also, [...]

88 Appendix Why am I not receiving E-mail alert messages? Make sure that the registered E-mail address and SMTP server address are cor- rect. If the SMTP server is located in your LAN (Local Area network), the address should be set to the SMTP server in your LAN. The SMTP server locat- ed outside of your LAN may not be available for security reason[...]

89 Network Board OWNER’S MANUAL Appendix ENGLISH Can I update the firmware of the Network Board. It is possible to update the firmware through the network. It is required to have a special tool for the updat- ing. For further information please consult your local dealer. The ver- sion number of the firmware is indi- cated on the lower part of the[...]

90 Appendix What are the rules for IP address assignment? If the network is constructed with TCP/IP protocol, a unique IP address is required for each piece of network equipment. The following are basic rules of the assignment. Rule1 Do not configure the same IP address to the network equipment in the same network group. Each piece of equipment mus[...]

91 Network Board OWNER’S MANUAL Appendix ENGLISH[...]

Network Board Owner’s Manual-IDFV[...]