Electrolux ERN 15300 manuale d’uso

fridge - freez er INSTR UCTION BOOK 2222 747-56 ERN 15300[...]

2 IMPOR T ANT SAFETY INFORMA TION It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner , or should you mo ve house and leave the appliance, al ways ensure that the book is left with the appliance in or der that the ne w owner can get [...]

3 CONTENTS Instructions f or the User Important Safety Information 2 Operation 4 Bef ore use 4 Setting the temperature 4 The freezer compar tment 4 Thawing 4 Making ice cubes 4 F resh food refrigeration 5 Normal operating sounds 5 Mov able shelves 5 P ositioning the door shelves 5 Hints and Tips 6 Maintenance and Cleaning 7 Inter nal cleaning 7 Whe[...]

4 Making ice cubes The appliance is provided with one or more tra ys for ice-cubes tra ys. Fill the tra y(s) 3/4 full to give the ice space to e xpand and place them in the freezer compar tment. T o release the ice cubes simply giv e the tra y a slight twist. Do not use shar p or metallic instruments to remove the tra ys from the freezer . Thawing [...]

5 Normal Operating Sounds • Y ou ma y hear f aint gurgling or bub bling sounds when the refrigerant is pumped through the coils or tubing at the rear , to the cooling plate/e v aporator or to the fix ed freezer shelves . • When the compressor is on, the refrigerant is being pumped round, and you will hear a whirring sound or pulsating noise fro[...]

6 Food Storage • T o obtain the best results from your appliance, neither hot f oods nor liquids which ma y e v aporate, should be placed in the larder compar tment. • K eep the time between buying chilled f ood and placing it in your fridge as shor t as possible . • Do not push f ood together too much, try to allow air to circulate around ea[...]

7 MAINTENANCE AND CLEANING Bef ore any maintenance or cleaning w ork is carr ied out, DISCONNECT the appliance from the ELECTRICITY supply . Internal c leaning Clean the inside and accessories with warm water and bicarbonate of soda (5ml to 0.5 litre of water). Rinse and dr y thoroughly . NEVER USE DETERGENTS, ABRASIVE PO WDERS, HIGHL Y PERFUMED CL[...]

8 • When defrosting is completed, dry the interior thoroughly and refit the plug. • T urn the thermostat knob back to the required setting or replace the plug in the power socket. • Reload the previously removed food into the compartment. Never use sharp met al tools to scrape off frost from the evaporator as you could damage it. Do not use a[...]

9 SOMETHING NO T W ORKING Symptom No power to the appliance The light does not come on The temperature in the fridge or freezer section is too high The compressor runs continously Noise W ater under the salad bin Solution Check there is po wer at the soc ket. Check there is not a po wer cut b y checking the household lights. Check the fuse has not [...]

10 CUST OMER CARE DEP AR TMENT In the e v ent of your appliance requiring ser vice, or if y ou wish to purchase spare par ts, please contact your local Electrolux Ser vice F orce Centre by telephoning:- 0870 5 929929 Y our telephone call will be automatically routed to the Ser vice F orce Centre cov er ing your post code area. F or the address of y[...]

11 Standar d guarantee conditions W e, Electrolux, undertake that if within 12 months of the date of the purchase this Electrolux appliance or any par t thereof is prov ed to be def ectiv e by reason only of f aulty workmanship or mater ials, we will, at our option repair or replace the same FREE OF CHARGE f or labour , materials or carr iage on co[...]

12 TECHNICAL SPECIFICA TIONS PO WER SUPPL Y V OL T AGE AND FREQ UENCY 220-240 V / 50 Hz T O T AL PO WER ABSORBED 160 W A VERA GE D AIL Y UNITS ELECTRICITY * 0.879 kWh GR OSS CAP A CITY F r idge 173 l F reezer 110 l NET CAP ACITY F r idge 170 l F reezer 92 l ST AR RA TING * This figure is based on standard test results in accordance with European St[...]

13 INST ALLA TION P ositioning This appliance should only be installed at a location where the ambient temperature corresponds to the climate classification indicated on the rating plate, which is located at the left on the inside of the appliance. The f ollowing tab le shows which ambient temperature is correct f or each climate classification: SN[...]

14 Electrical connections Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. W ARNING: THIS APPLIANCE MUST BE EARTHED . The manufacturer dec lines any liability should this safety measure not be observed. If the plug that is fitted to your appliance is not suitable f or your [...]

15 DOOR REVERSAL The appliance’ s door has been lock ed in position f or transpor t by means of pins on both sides . According to the door opening direction, remov e relev ant pins at the top and at the bottom. Inner door reversal W arning! If the ambient temperature is cold (i.e. in Winter), the gasket ma y not fit perfectly to the cabinet. In t[...]

16 Fit the appliance in the niche by making sure that it stands against the interior surface of the unit on the side where the door hinges of the appliances are fitted. Inser t the appliance until the upper str ip butts up against the unit (1) and make sure that the lo wer hinge is in line with the surf ace of the unit (2). D022 1 2 I F asten the a[...]

17 D724 Apply the sealing strip pushing it between the refrigerator and the adjacent cabinet. Apply cov ers (C-D) on joint cover lugs and into hinge holes. Snap vent g rille (B) and hinge cov er (E) into position. PR266 Ha Hb Hc Hd Separate par ts Ha, Hb , Hc, Hd as shown in the figure. B E C D Place guide (Ha) on the inside par t of the fur niture[...]

18 Fix cov er (Hc) on guide (Ha) until it clips into place PR33 Hc Ha PR167 Ha Hb 8m m Open the appliance door and the furniture door at 90 ° . Inser t the small square (Hb) into guide (Ha). Put together the appliance door and the furniture door and mark the holes as indicated in the figure. . Remov e the brack ets and mark a distance of 8 mm from[...]

After completion of the door rever sing operation, chec k that the door gasket adheres to the cabinet. If the ambient temperature is cold (i.e . in Winter), the gasket may not fit perfectly to the cabinet. In that case , wait for the natural fitting of the gasket or accelerate this process b y heating up the part inv olved with a normal hairdryer o[...]

© Electrolux plc 2007[...]