Emerson 2230 manuale d’uso

www .rosemount-tg.com Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 Graphical Field Display[...]

[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 www .rosemount-tg.com Rosemount 2230 Graphical Field Display Cover Photo: 2230_coverphoto_2.jpg NOTICE Read this manual before working with the product. For personal and system safety , and for optimum product performance, make sure you thoroughly understand the contents before ins[...]

[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 TOC-1 Rosemount 2230 Table of Contents T able of Contents SECTION 1 Introduction 1.1 Safety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 1.2 Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 1.3 Manual Overvie[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 TOC-2 Table of Contents SECTION 4 Configuration and Operation 4.1 Safety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 4.2 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 4.2.1 The 2230 Graphica[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 TOC-3 Rosemount 2230 Table of Contents SECTION 5 Service and Troubleshooting 5.1 Safety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 5.2 Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 5.2.1 Status Informa[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 TOC-4 Table of Contents[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 www .rosemount-tg.com Section 1 Introduction 1.1 Safety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1- 1 1.2 Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1-2 1.3 Manual Overview . . . . . . . . . . . . . . . . . . . . [...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 1-2 Section 1. Introduction 1.2 SYMBOLS The CE marking symbolizes the conformity of the product with the applicable European Community Directives. The EC-T ype Examination Certificate is a statement of a Notified Certification Body declaring that this product meets the Essential He[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 1-3 Rosemount 2230 Section 1. Introduction 1.3 MANUAL OVERVIEW Section 1:Introduction • Manual overview • Product recycling/disposal • Packing material Section 2: Overview • Introduction • 2230 Components • System Overview • Getting started • Installation Procedure Section 3: Inst[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 1-4 Section 1. Introduction 1.4 T ECHNICAL DOCUMENTATION The Rosemount T ank Gauging System includes the following documents: Document Reference Number Rosemount Raptor System Data Sheet 704010EN Rosemount 5900S Reference Manual 00809-0100-5900 Rosemount 2410 Reference Manual 30053[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 1-5 Rosemount 2230 Section 1. Introduction 1.5 PRODUCT RECYCLING/ DISPOSAL Recycling of equipment and packaging should be taken into consideration and disposed of in accordance with local and national legislation/regulations. The label below is put on Rosemount T ank Gauging products as a recomme[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 1-6 Section 1. Introduction[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 www .rosemount-tg.com Section 2 Overview 2.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2-1 2.2 2230 Components . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2-2 2.3 System Overview . . . . . . . . . . . . . . . . . . . . . . . . [...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 2-2 Section 2. Overview 2.2 2230 COMPONENTS Figure 2-2. Rosemount 2230 components 1. Weather protection lid (1) 2. Display 3. Menu 4. Soft keys 5. Activity indicator 6. Cover screw 7. Cable entries: two M20 x 1.5 and one M25 x 1.5 (optional: ½ - 14 NPT and ¾ - 14 NPT adapters) 8.[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 2-3 Rosemount 2230 Section 2. Overview 2.3 SYSTEM OVERVIEW The Rosemount T ank Gauging state-of-the art inventory and custody transfer radar tank level gauging system is developed for a wide range of applications at refineries, tank farms and fuel depots, and fulfills the highest requirements on [...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 2-4 Section 2. Overview Figure 2-3. Rosemount T ank Gauging System architecture 2230 Display 2240S T emperature T ransmitter 5900S Radar Level Gauge 2410 T ank Hub T ankbus 5300 Level T ransmitter 5400 Level T ransmitter 3051S Pressure T ransmitter TRL2 Modbus Group bus 2180 Field [...]

Reference Manual 00809-0100-2230, Rev BB August 2014 2-5 Rosemount 2230 Section 2. Overview Figure 2-4. Rosemount T ank Gauging system architecture for wireless systems 2230 Display 2240S T emperature T ransmitter 5900S Radar Level Gauge 2410 T ank Hub 3051S Pressure T ransmitter Smart Wireless Gateway T ankMaster PC 644 644 644T emperature T ransm[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 2-6 Section 2. Overview Figure 2-5. Rosemount T ank Gauging system architecture in a Foundation fieldbus network 2230 Display 2240S T emperature T ransmitter 5900S Radar Level Gauge 3051S Pressure T ransmitter PC 644 644 644T emperature T ransmitter NON-HAZARDOUS AREA HAZARDOUS ARE[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 2-7 Rosemount 2230 Section 2. Overview T ankMaster HMI Software T ankMaster is a powerful Windows-based Human Machine Interface (HMI) for complete tank inventory management. It provides configuration, service, set-up, inventory , and custody transfer functions for Rosemount T ank Gauging systems [...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 2-8 Section 2. Overview The Rosemount 5900S sends microwaves towards the surface of the product in the tank. The level is calculated based on the echo from the surface. No part of the 5900S is in actual contact with the product in the tank, and the antenna is the only part of the g[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 2-9 Rosemount 2230 Section 2. Overview Rosemount Smart Wireless Gateway and Rosemount Smart Wireless THUM Adapter A THUM Adapter allows wireless communication between a 2410 T ank Hub and a Smart Wireless Gateway . The gateway is the network manager that provides an interface between field device[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 2-10 Section 2. Overview 2.3.1 System Start-up The standard start-up procedure of a Rosemount T ank Gauging system that includes devices such as the 2160 Field Communication Unit, 2410 T ank Hub, 5900S Radar Level Gauge, and the 2240S Multi-input T emperature T ransmitter can be su[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 2-1 1 Rosemount 2230 Section 2. Overview 2.4 INSTALLATION PROCEDURE Follow these steps for proper installation of the Rosemount 2230 Graphical Field Display: 1. Review installation considerations (“Installation Considerations” on page 3-2) 4. Power up the 2230 5. Configure the 2230 (Section 4[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 2-12 Section 2. Overview[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 www .rosemount-tg.com Section 3 Installation 3.1 Safety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3-1 3.2 Mechanical Installation . . . . . . . . . . . . . . . . . . . . . . page 3-2 3.3 Electrical Installation . . . . . . . . . . . . . . . . . . . . . .[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 3-2 Section 3. Installation 3.2 MECHANICAL INSTALLATION 3.2.1 Installation Considerations The Rosemount 2230 Graphical Field Display can be installed either on the tank roof or at the foot of the tank for a flexible and convenient read-out of tank data. The 2230 is designed for mou[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 3-3 Rosemount 2230 Section 3. Installation 3.2.2 Mounting the Graphical Display The Rosemount 2230 Graphical Field Display is designed for mounting on a plate, wall, or pipe. Mounting on a Plate The 2230 display can be mounted on a plate by attaching four M4 screws to the back of the display . T [...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 3-4 Section 3. Installation W all Mounting with Bracket The Rosemount 2230 Graphical Field Display can be mounted on a wall by using the optional mounting kit supplied by Rosemount T ank Gauging. 1. Mount the bracket on the wall by using four M8 screws and flat washers. Note ! Coun[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 3-5 Rosemount 2230 Section 3. Installation Pipe Mounting The 2230 can be mounted on pipes ranging from a diameter of 33 to 60 mm by using an optional mounting kit supplied by Rosemount T ank Gauging. 1. Attach the bracket to the pipe. 2. Ensure that the 2230 is placed in a direction so that the d[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 3-6 Section 3. Installation 3.3 ELECTRICAL INSTALLATION 3.3.1 Cable/Conduit Entries The electronics housing has three entries, two M20×1.5 and one M25×1.5 (Optional: adapters for two ½ - 14 NPT and one ¾- NPT). Minifast and eurofast adapters are also available. The connections [...]

Reference Manual 00809-0100-2230, Rev BB August 2014 3-7 Rosemount 2230 Section 3. Installation Grounding - F OUNDATION ™ Fieldbus Signal wiring of the fieldbus segment must not be grounded. Grounding one of the signal wires will shut down the entire fieldbus segment. Shield Wire Connection T o protect the fieldbus segment from noise, grounding t[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 3-8 Section 3. Installation 3.3.6 The T ankbus The Rosemount T ank Gauging system is easy to install and wire. Devices can be “daisy-chained” thus reducing the number of segment couplers. In a Rosemount T ank Gauging system devices communicate with a Rosemount 2410 T ank Hub vi[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 3-9 Rosemount 2230 Section 3. Installation 3.3.7 T ypical installations The example below in Figure 3-4 illustrates a system with terminators at both ends of the fieldbus segment as required in a F OUNDATION fieldbus system. In this case terminators are enabled in the Rosemount 2410 T ank Hub and[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 3-10 Section 3. Installation 3.3.8 2230 in F OUNDATION fieldbus systems The Rosemount 2230 Display supports the F OUNDATION fieldbus (FF) technology and lets you integrate a 2230 into an existing FF network. As long as the power supply meets certain requirements (see Figure 3-5 and[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 3-1 1 Rosemount 2230 Section 3. Installation 3.3.9 Wiring Use the following wiring procedure for the Rosemount 2230: 1. Unscrew and remove all screws at the front of the display . 2. Remove the cover carefully . T ake care of the locking spring for the weather protection hatch, see “2230 Compon[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 3-12 Section 3. Installation Figure 3-7. 2230 cable connections X2: T ankbus FB+ input X3: T ankbus FB- input Jumper for built-in termination X3: T ankbus (-) output Cable Shield X2: T ankbus (+) output Front cover X4: T ankbus terminator Internal grounding Daisy-chain connection t[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 3-13 Rosemount 2230 Section 3. Installation Daisy-Chain Connection Y ou may use the daisy-chain option in order to connect the Rosemount 2230 to other field devices on the T ankbus: 1. Unscrew and remove all six screws on the front of the Rosemount 2230. Remove the cover carefully . T ake care of[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 3-14 Section 3. Installation 3.4 LED SIGNALS AND RESET BUTTON The Rosemount 2230 has three LED signals that show communication and status. Figure 3-10. LED Signals Status LED Using different blinking sequences, the status LED indicates error codes. In normal operation the LED flash[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 3-15 Rosemount 2230 Section 3. Installation 3.5 SWITCHES 3.5.1 DIP Switches The Rosemount 2230 is equipped with four DIP switches as illustrated in Figure 3-1 1. Figure 3-1 1. DIP Switches The switches control the following settings: T able 3-2. Rosemount 2230 DIP Switches NOTE! Manual configurat[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 3-16 Section 3. Installation 3.6 AMBIENT T EMPERATURE The Rosemount 2230 is equipped with a temperature sensor for measuring ambient temperature. The temperature can be displayed on the field display and in the T ankMaster software. The ambient temperature affects the readability a[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 www .rosemount-tg.com Section 4 Configuration and Operation 4.1 Safety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4-1 4.2 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4-3 4.3 Menu T ree . . . . . . . . . . . . . . . . [...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 4-2 Section 4. Configuration and Operation Explosions could result in death or serious injury: V erify that the operating environment of the display is consistent with the appropriate hazardous locations certifications. Before connecting a hand held communicator in an explosive atm[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 4-3 Rosemount 2230 Section 4. Configuration and Operation 4.2 INTRODUCTION This chapter provides information about configuration and operation of the Rosemount 2230 Graphical Field Display . For information on how to use T ankMaster WinSetup to configure the 2230, see the Raptor System Configurat[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 4-4 Section 4. Configuration and Operation Adjusting the display contrast The 2230 automatically adjusts display contrast to optimize for changes of ambient temperature. The contrast can be manually adjusted when further fine-tuning is desired. T o increase the display contrast, pr[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 4-5 Rosemount 2230 Section 4. Configuration and Operation 4.2.3 Activity and Alarm Indication The Rosemount 2230 display shows a warning symbol for simulated or manual measurement values as illustrated in Figure 4-2 and Figure 4-3. Figure 4-2. Simulated or manual value Manual or simulated measure[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 4-6 Section 4. Configuration and Operation 4.2.4 Start-Up Procedure When the Rosemount 2230 display is powered on, a test of the LCD screen is performed. Figure 4-5. T est screen After the LCD test is done the start-up screen will appear . Figure 4-6. Start-up screen Once the start[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 4-7 Rosemount 2230 Section 4. Configuration and Operation 4.3 MENU T REE The Rosemount 2230 lets you navigate in a menu structure as illustrated in Figure 4-8: Figure 4-8. Rosemount 2230 Menu T ree[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 4-8 Section 4. Configuration and Operation 4.4 THE MAIN MENU In normal operation the Rosemount 2230 display is in View Mode and shows the current measurement values for the selected tanks. In case of an alarm, a graphical symbol appears on the screen. Figure 4-9. Rosemount 2230 Gra[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 4-9 Rosemount 2230 Section 4. Configuration and Operation 4.5 THE SELECT VIEW MENU In the Select View menu, you can specify the number of measurement values to be displayed in View Mode. T o configure the Select View menu: 1. In View Mode, press the <Menu> button to navigate to the Main men[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 4-10 Section 4. Configuration and Operation 4.6 THE OPTIONS MENU In the Options Menu, the following items are available for a Rosemount 2230 in a Rosemount 2410 T ank Hub system: • V ariables (1) • T anks (1) • Units for Display • T oggle T ime • Language T o choose an it[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 4-1 1 Rosemount 2230 Section 4. Configuration and Operation 4.6.1 V ariables In the Select V ariables menu (1) , you can choose which variables to present in View Mode. The following options are available: • T ank Pos 1-10 (2) lets you configure a common set of variables to be presented for all[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 4-12 Section 4. Configuration and Operation T able 4-1. Selectable variables Select V ariables in T ankMaster WinSetup V ariables to present in the View Mode can also be configured by using the T ankMaster WinSetup configuration program. For more information see the Raptor System C[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 4-13 Rosemount 2230 Section 4. Configuration and Operation 4.6.2 Select T anks In the Select T anks menu (1) , you can specify which tanks to show in View Mode. The following items are available: • Default which lets you view all tanks that are configured in the T ank Database of the 2410 T ank[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 4-14 Section 4. Configuration and Operation 4.6.3 Units for Display In the Units for Display menu, you can see which measurement units that are used for the displayed variables. The available measurement units are listed in T able 4-2 on page 4-15. T o change measurement unit: 1. I[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 4-15 Rosemount 2230 Section 4. Configuration and Operation T able 4-2. Available measurement units for the Rosemount 2230 V ariable A vailable Measurement Units Auto When Auto is selected the unit that will appear on the display is controlled by the Multiple Analog Output Block configuration. See[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 4-16 Section 4. Configuration and Operation 4.6.4 T oggle Time The T oggle T ime parameter specifies the time period that each value, or set of values, is presented on the display . T o set the T oggle T ime: 1. From View Mode, press <Menu> <Options> <T oggle T ime&g[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 4-17 Rosemount 2230 Section 4. Configuration and Operation 4.7 THE SERVICE MENU In the Service Menu, the following items are available: • Status • Custody T ransfer V iew (1) • LCD T est • LCD Contrast • Restart • Factory Settings (1) • About T o choose a Service menu item: 1. In Vi[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 4-18 Section 4. Configuration and Operation 4.7.1 Status The Status screen shows the current status of the 2230. V arious error messages and warnings can be displayed in case of software or hardware malfunctions. See “T roubleshooting” on page 5-7 for more information. T o view[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 4-19 Rosemount 2230 Section 4. Configuration and Operation 4.7.3 LCD T est In the LCD test two checkered patterns will be displayed testing the whole display area. T o open the LCD T est view: 1. In View Mode, press <Menu><Service><LCD T est>: Figure 4-29. LCD test 2. After the [...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 4-20 Section 4. Configuration and Operation 4.7.5 Restart T o restart the 2230: 1. In View Mode, press <Menu><Service>: Figure 4-31. The Restart option 2. Choose the Restart option and press the softkey . The Restart option will perform start-up tests of software and ha[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 4-21 Rosemount 2230 Section 4. Configuration and Operation 4.7.7 About T o view the About information: 1. In View Mode, press <Menu><Service>. 2. Choose the About option and press the softkey . Figure 4-34. Software revisions for Rosemount 2230 3. The About option will present the cur[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 4-22 Section 4. Configuration and Operation 4.8 F OUNDATION FIELDBUS OVERVIEW This section provides a brief overview of F OUNDATION Fieldbus block operation with the Rosemount 2230 Graphical Field Display . For detailed information about F OUNDATION Fieldbus technology and function[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 4-23 Rosemount 2230 Section 4. Configuration and Operation 4.9 DEVICE CAPABILITIES 4.9.1 Link Active Scheduler The Rosemount 2230 can be designated to act as the backup Link Active Scheduler (LAS) in the event that the LAS is disconnected from the segment. As the backup LAS, the 2230 will take ov[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 4-24 Section 4. Configuration and Operation 4.10 GENERAL BLOCK INFORMATION 4.10.1 Modes Changing Modes T o change the operating mode, set the MODE_BLK.T ARGET to the desired mode. After a short delay , the parameter MODE_BLOCK.ACTUAL should reflect the mode change if the block is o[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 4-25 Rosemount 2230 Section 4. Configuration and Operation 4.10.2 Factory Configuration The following fixed configuration of function blocks is provided: T able 4-5. Available function blocks for the 2230 4.1 1 MULTIPLE ANALOG OUTPUT BLOCKS T o show input data from MAO blocks on the display , the[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 4-26 Section 4. Configuration and Operation 4.1 1.2 Application Example A 2230 Graphical Field Display configured for receiving level and temperature measurement data from devices such as the Rosemount 5900S Radar Level Gauge and the Rosemount 2240S T emperature T ransmitter . Figu[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 4-27 Rosemount 2230 Section 4. Configuration and Operation 4.12 RESOURCE BLOCK 4.12.1 FEA TURES and FEA TURES_SEL The FEA TURES parameter is read only and defines which features are supported by the 2230. Below is a list of the FEA TURES the 2230 supports. FEA TURES_SEL is used to turn on any of [...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 4-28 Section 4. Configuration and Operation The following table displays all possible configurations of the WRITE_LOCK parameter . T able 4-6. Possible configuration of the WRITE_LOCK parameter . 4.12.2 MAX_NOTIFY The MAX_NOTIFY parameter value is the maximum number of alert report[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 4-29 Rosemount 2230 Section 4. Configuration and Operation 4.12.3 Field Diagnostic Alerts The Resource Block acts as a coordinator for Field Diagnostic alerts. There are four alarm parameters (FD_F AIL_ALM, FD_OFFSPEC_ALM, FD_MAINT_ALM, and FD_CHECK_ALM) which contain information regarding some o[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 4-30 Section 4. Configuration and Operation Out of Specification Alarms An Out of Specification alarm indicates that the device operates out of the specified measurement range. If the condition is ignored, the device will eventually fail. There are five parameters associated with F[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 4-31 Rosemount 2230 Section 4. Configuration and Operation Maintenance Alarms A Maintenance alarm indicates that the device or some part of the device needs maintenance soon. If the condition is ignored, the device will eventually fail. There are five parameters associated with FD_MAINT_ALM, they[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 4-32 Section 4. Configuration and Operation Function Check Alarms A Function Check alarm indicates that the device is temporary non-valid due to some activities, for example maintenance, on the device. There are five parameters associated with FD_CHECK_ALM, they are described below[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 4-33 Rosemount 2230 Section 4. Configuration and Operation 4.13 475 FIELD COMMUNICATOR MENU T REE The 2230 can be configured by using a 475 Field Communicator . The menu tree below shows the available options for configuration and service. Figure 4-36. Field Communicator Menu T ree 1 Overview 2 C[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 4-34 Section 4. Configuration and Operation 4.14 CONFIGURATION USING AMS DEVICE MANAGER The Rosemount 2230 Graphical Field Display supports DD Methods to facilitate device configuration. The following description shows how to use the AMS Device Manager application to configure the [...]

Reference Manual 00809-0100-2230, Rev BB August 2014 4-35 Rosemount 2230 Section 4. Configuration and Operation 5. The Overview window shows information about the current device status; Good or Bad . It also gives you access to more detailed information by pressing the Device Information button. 6. Select the Configure > Guided Setup option to o[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 4-36 Section 4. Configuration and Operation 7. Set the Display T ransducer Block to Out Of Service (OOS) mode by clicking the Change button. 8. Now proceed with configuration of Multiple Analog Output (MAO) blocks by pressing the appropriate button; Multiple Analog Output Block (#)[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 4-37 Rosemount 2230 Section 4. Configuration and Operation 10. Configure all the MAO Blocks that are used. Ensure that unused MAO block inputs are unconfigured, i.e. that there are no tank numbers or tank parameters configured for these inputs. 1 1. Click the Send button to store the current conf[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 4-38 Section 4. Configuration and Operation 16. In the Custom Units window specify units for the various custom parameters. The unit label can be specified anyway you like. It does not need to be a standard unit such as metric or imperial units. 17. Click the Send button to store t[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 4-39 Rosemount 2230 Section 4. Configuration and Operation 4.14.2 Manual Setup In case you wish to configure device options not available in the Guided Setup window , for example specifying tank names, you may use the Manual Setup option. T o open Manual Setup: 1. Open the AMS Device Manager appl[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 4-40 Section 4. Configuration and Operation 4.15 ALERT SETUP The Alert Setup window allows you to configure and enable/disable Alerts. For details on how to view active alerts see “Viewing Active Alerts in AMS” on page 5-14. T o open the Alert Setup window: 1. From the Start me[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 4-41 Rosemount 2230 Section 4. Configuration and Operation 6. Select the desired tab ( FF I/O Board or 2230 Graphical Field Display ). 7. Configure alerts for the different error types. 8. Y ou may change the configuration for each error type by selecting the appropriate check box to match your r[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 4-42 Section 4. Configuration and Operation 4.15.1 Alert Default Settings The following default settings are used for the FF I/O Board and the 2230 Graphical Field Display . Y ou may configure error types in a different way if you like. For example, the Internal T emperature Out of[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 www .rosemount-tg.com Section 5 Service and T roubleshooting 5.1 Safety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 5-1 5.2 Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 5-2 5.3 T roubleshooting . . . . . . . . . . . [...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 5-2 Section 5. Service and Troubleshooting 5.2 SERVICE 5.2.1 Status Information The Status screen lets you view the current status of the Rosemount 2230 . T o open the status information screen: 1. In the View Mode, press <Menu> <Service> <Status>: Figure 5-1. Ros[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 5-3 Rosemount 2230 Section 5. Service and Troubleshooting 5.2.2 Viewing Input and Holding Registers Measured data is continuously stored in the Rosemount 2230 Input Registers. They can be used for verifying that the Rosemount 2230 works properly and for advanced troubleshooting. The Holding Regis[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 5-4 Section 5. Service and Troubleshooting 4. The Predefined option lists a basic selection of useful registers. 5. Choose the desired Start Register and enter the Number of Registers to read. 6. Click the Read button to update the V alue column with the current register values. In[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 5-5 Rosemount 2230 Section 5. Service and Troubleshooting 5.2.3 Restarting the 2230 Display T o restart the Rosemount 2230 choose one of the following options: • choose the Restart option in the Service menu, see “Restart” on page 4-20 • press the Reset button inside the display cover , s[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 5-6 Section 5. Service and Troubleshooting 5.2.4 Device Error Signals A Light Emitting Diode (LED) inside the 2230 cover is used for presentation of device status using different blinking sequences. Figure 5-3. Error signals In normal operation the LED flashes once every other seco[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 5-7 Rosemount 2230 Section 5. Service and Troubleshooting 5 . 3 T ROUBLESHOOTING T able 5-3 provides summarized maintenance and troubleshooting suggestions for the most common operating problems. 5.3.1 General This section covers problems which are not related to the type of system in which the R[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 5-8 Section 5. Service and Troubleshooting 5.3.2 T ankbus System This section covers systems with field devices connected to a Rosemount 2410 T ank Hub. T able 5-4. T roubleshooting chart for T ankbus related problems Symptom Possible cause Action No communication with the Rosemoun[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 5-9 Rosemount 2230 Section 5. Service and Troubleshooting 5.3.3 Foundation Fieldbus System This section covers Rosemount T ank Gauging systems in F OUNDATION fieldbus networks. T able 5-5. T roubleshooting chart for Foundation Fieldbus related problems Configuration of communication protocol In T[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 5-10 Section 5. Service and Troubleshooting 5.3.4 Device Errors T able 5-6 shows a list of error messages for the Rosemount 2230 . Detailed information about the different error types can be found in Input registers 1 100 - 1 134 as shown in T able 5-6. T able 5-6. Device Errors Me[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 5-1 1 Rosemount 2230 Section 5. Service and Troubleshooting 5.3.5 Device W arnings Device warnings are signaled in the Input Register Device Warnings. W arnings are less serious than errors. Detailed information about the different warning types can be found in Input registers 1050 - 1070. T able[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 5-12 Section 5. Service and Troubleshooting 5.3.6 Status Information Status information is available for each measurement variable via the Status button in the View menu. T able 5-8. Status Information Status button Status Description Action Invalid_TV_V alue Invalid source value. [...]

Reference Manual 00809-0100-2230, Rev BB August 2014 5-13 Rosemount 2230 Section 5. Service and Troubleshooting 5.4 RESOURCE BLOCK T able 5-9. Resource Block BLOCK_ERR messages 5.5 T RANSDUCER BLOCK Error conditions that may appear in the T ransducer block. T able 5-10. T ransducer Block BLOCK_ERR messages Condition Name Description Block configura[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 5-14 Section 5. Service and Troubleshooting 5.6 ALERTS The AMS Device Manager lets you view active alerts. The alarm parameters FD_F AIL_ALM, FD_OFFSPEC_ALM, FD_MAINT_ALM, and FD_CHECK_ALM contain information regarding some of the device errors. Active error conditions are displaye[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 5-15 Rosemount 2230 Section 5. Service and Troubleshooting 6. The Active Alerts tab shows the alerts that are currently active. All types of alerts can be shown; Failed, Maintenance, Out of Specification, and Check Function. A brief description of the error is presented as well as the recommended[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 5-16 Section 5. Service and Troubleshooting 5.6.2 Recommended Actions The FD_RECOMMEN_ACT and RECOMMENDED_ACTION parameters display text strings that will give a recommended course of action to take based on which type and which specific event of the alert that is active. T able 5-[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 5-17 Rosemount 2230 Section 5. Service and Troubleshooting 5.7 SERVICE T OOLS IN AMS 5.7.1 Service T ools Window AMS Device Manager supports a number of service functions for the 2230 display . T o access the service tools: 1. Start AMS Device Manager and open the Vie w > D evice Explorer . 2.[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 5-18 Section 5. Service and Troubleshooting 4. In the Navigation Pane select the desired Service T ools option. The following Service T ool options are available: T able 5-12. Service T ools options Service T ools T abs Options Alerts Active Alerts V ariables MAO Block 1-4 Internal[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 5-19 Rosemount 2230 Section 5. Service and Troubleshooting 5.7.2 Device Status T o view the current device status: 1. In AMS Device Manager open Service T ools window as shown in section “Service T ools Window” on page 5-17. 2. In the Navigation Pane select the Maintenance option. 3. Select t[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 5-20 Section 5. Service and Troubleshooting 5.7.3 Viewing Input/Holding Registers Measurement data is continuously updated in the Rosemount 2230 Input Registers. They can be used for verifying that the Rosemount 2230 works properly and for advanced troubleshooting. The Holding Regi[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 5-21 Rosemount 2230 Section 5. Service and Troubleshooting 5. Select one of the tabs Holding Registers or Input Registers , depending on what type of register you are interested in. 6. T ype a start value in the Start Holding/Input Register field, and click the Send button to view the current reg[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 5-22 Section 5. Service and Troubleshooting 5.7.4 Reset/Restore The Service T ools/Maintenance option lets you restart the Rosemount 2230 Display if needed. Y ou may also reset the 2230 to factory configuration: 1. In AMS Device Manager open Service T ools as shown in “Service T [...]

Reference Manual 00809-0100-2230, Rev BB August 2014 5-23 Rosemount 2230 Section 5. Service and Troubleshooting 5.7.5 V ariables The Service T ools/V ariables option lets you view the current values of the Multiple Analog Output Block inputs as well as the Internal T emperature of the 2230 Display . T o reset a Rosemount 2230 Display to factory con[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 5-24 Section 5. Service and Troubleshooting 5.7.6 Simulation The Service T ools/Maintenance option lets you simulate Field Diagnostics alerts. T o start simulation: 1. Ensure that the Simulation switch is set to “ON” (see “Write Protection” on page 5-25). 2. In AMS Device M[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 5-25 Rosemount 2230 Section 5. Service and Troubleshooting 5.8 WRITE PROTECTION There are two write protection options available for the 2230 Display; hardware switch and software protection. Hardware Switch The Write Protect switch enables write protection of configuration data and F OUNDATION f[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 5-26 Section 5. Service and Troubleshooting Software Write Protection in AMS When the Rosemount 2230 Display is used in F OUNDATION fieldbus systems it can be software write protected in order to prevent changes of the configuration database and F IELDBUS parameters. T o enable sof[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 www .rosemount-tg.com Appendix A Reference Data A.1 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page A-1 A.2 Dimensional drawings . . . . . . . . . . . . . . . . . . . . . . . page A-3 A.3 Ordering Information . . . . . . . . . . . . . . . . . . . . .[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 A-2 Appendix A. Reference Data F OUNDATION ™ fieldbus characteristics Polarity sensitive No Quiescent current draw 30 mA Lift-off minimum voltage 9.0 VDC Device capacitance / inductance See Appendix B: Product Certifications Class (Basic or Link Master) Link Master (LAS) Number o[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 A-3 Rosemount 2230 Appendix A. Reference Data A.2 DIMENSIONAL DRAWINGS Figure A-1. Dimensional drawings 150 mm (5.9 in.) 78 mm (3.1 in.) 120 mm (4.7 in.) Radius 95 mm (3.7 in.)[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 A-4 Appendix A. Reference Data A.3 ORDERING INFORMATION Model (Pos 1) Product Description Note 2230 Graphical Field Display Code (Pos 2) Default Language Note E English S Spanish G German F French P Portuguese I Italian C Chinese Code (Pos 3) T ankbus: Power and Communication Note [...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 www .rosemount-tg.com Appendix B Product Certifications B.1 Safety messages . . . . . . . . . . . . . . . . . . . . . . . . . . . page B-1 B.2 EU Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page B-2 B.3 Hazardous Locations Certifications . . . . . . . . . .[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 B-2 Appendix B. Product Certifications B.2 EU CONFORMITY The EC declaration of conformity for all applicable European directives for this product can be found on the Rosemount T ank Gauging web site at www .rosemount-tg.com. A hard copy may be obtained by contacting our local sales[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 B-3 Rosemount 2230 Appendix B. Product Certifications B.3 HAZARDOUS LOCATIONS CERTIFICATIONS The Rosemount 2230 Graphical Field Displays that have the following labels attached have been certified to comply with the requirements of the approval agencies noted. B.3.1 Factory Mutual US Approvals Ce[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 B-4 Appendix B. Product Certifications B.3.2 Factory Mutual Canadian Approvals Certificate of Compliance: 3037177C. Figure B-2. Factory Mutual Intrinsic Safety Canadian Approval Label I6 FISCO Field Device (Fieldbus T erminals) Intrinsically Safe for Class I, II, III Division 1, Gr[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 B-5 Rosemount 2230 Appendix B. Product Certifications B.3.3 European A TEX Directive Information The Rosemount 2230 Graphical Field Displays that have the following labels attached have been certified to comply with Directive 94/9/EC of the European Parliament and the Council as published in the [...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 B-6 Appendix B. Product Certifications Specific Conditions of Certification (X) 1. The non-metallic parts incorporated in the enclosure of this equipment may generate an ignition-capable level of electrostatic charge. Therefore particularly when it is used for applications that spe[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 B-7 Rosemount 2230 Appendix B. Product Certifications B.3.4 IECEx Approval Figure B-4. IECEx Intrinsic Safety Approval Label I7 The following information is provided as part of the label of the transmitter: • Name and address of the manufacturer (Rosemount) • Model number • Serial number of[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 B-8 Appendix B. Product Certifications B.4 APPROVAL DRAWINGS Follow the installation guidelines presented in Factory Mutual system control drawings in order to maintain certified ratings for installed devices. The following drawings are included in the documentation for the Rosemou[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 C-1 Rosemount 2230 Appendix C. F OUNDATION fieldbus Block Information Appendix C F OUNDATION fieldbus Block Information C.1 Resource Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . page C-2 C.2 Register T ransducer Block . . . . . . . . . . . . . . . . . . . page C-6 C.3 Main T rans[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 C-2 Appendix C. F OUNDATION fieldbus Block Information C.1 RESOURCE BLOCK This section contains information on the Resource Block of the Rosemount 2230S Graphical Field Display . The resource block defines the physical resources of the device. The resource block also handles functi[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 C-3 Rosemount 2230 Appendix C. F OUNDATION fieldbus Block Information 17 FEA TURES Used to show supported resource block options. The supported features are: • HARD_WRITE_LOCK_SUPPORT • SOFT_WRITE_LOCK_SUPPORT • REPORT_SUPPOR T • UNICODE_SUPPORT • MUL TI_BIT ALARM • F AUL T_ST A TE_SU[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 C-4 Appendix C. F OUNDATION fieldbus Block Information 42 FD_VER A parameter equal to the value of the major version of the Field Diagnostics specification that this device was designed to. 43 FD_F AIL_ACTIVE This parameter reflects the error conditions that are being detected as a[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 C-5 Rosemount 2230 Appendix C. F OUNDATION fieldbus Block Information T able C-2. FD_SIMULA TE elements 77 F AILED_PRI Designates the alarming priority of the F AILED_ALM and also used as switch b/w FD and legacy PW A. If value is greater than or equal to 1 then PWA alerts will be active in devic[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 C-6 Appendix C. F OUNDATION fieldbus Block Information C.2 REGISTER T RANSDUCER BLOCK The Register T ransducer Block (TB 1200) allows access to Database registers and Input registers of the Rosemount 2230 Graphical Field Display . This makes it possible to read a selected set of re[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 C-7 Rosemount 2230 Appendix C. F OUNDATION fieldbus Block Information 12 COLLECTION_DIRECTORY A directory that specifies the number , starting indices, and DD Item ID’s of the data collections in each transducer within a transducer block. 13 TRANSDUCER_TYPE_VER 14 RB_P ARAMETER 15-44 INP_REG_n_[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 C-8 Appendix C. F OUNDATION fieldbus Block Information C.3 MAIN T RANSDUCER BLOCK The Main T ransducer (TB1 100) block contains parameters for configuration of the Rosemount 2230 Graphical Field Display . It contains device information including diagnostics and the ability to confi[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 C-9 Rosemount 2230 Appendix C. F OUNDATION fieldbus Block Information C.3.1 Diagnostic Device Alerts T able C-5 lists conditions reported in the DIAGN_DEVICE_ALERT parameter . T able C-5. Diagnostic Device Alerts 26 P1451_HOST_ST A TS P1451 Host Stats 27 SB_HEART_BEA T_CNT This number should be i[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 C-10 Appendix C. F OUNDATION fieldbus Block Information C.4 DISPLAY T RANSDUCER BLOCK The Display T ransducer block (TB 1300) includes parameters for setup of the 2230 Graphical Field Display for use in a F OUNDATION Fieldbus system. T able C-6. Display T ransducer Block Index Numb[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 C-1 1 Rosemount 2230 Appendix C. F OUNDATION fieldbus Block Information 25 MAO_2_INPUT_4 26 MAO_2_INPUT_5 27 MAO_2_INPUT_6 28 MAO_2_INPUT_7 29 MAO_2_INPUT_8 30 MAO_3_INPUT_1 31 MAO_3_INPUT_2 32 MAO_3_INPUT_3 33 MAO_3_INPUT_4 34 MAO_3_INPUT_5 35 MAO_3_INPUT_6 36 MAO_3_INPUT_7 37 MAO_3_INPUT_8 38 M[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 C-12 Appendix C. F OUNDATION fieldbus Block Information 67 CUSTOM_UNIT_2 Set the preferred text to show on the display for custom unit 2. 68 CUSTOM_UNIT_3 Set the preferred text to show on the display for custom unit 3. 69 CUSTOM_UNIT_4 Set the preferred text to show on the display[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 C-13 Rosemount 2230 Appendix C. F OUNDATION fieldbus Block Information C.5 MULTIPLE ANALOG OUTPUT BLOCK The Multiple Analog Output Block (MAO_1400 to MAO_1700) accepts output values from field devices and assigns them to specified I/O channels in order to make them available for the display . T a[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 C-14 Appendix C. F OUNDATION fieldbus Block Information 19 FST A TE_V AL2 The preset analog value to use when failure occurs in IN_2. Ignored if the “Fault state to value 2” in the MO_OPTS parameter is false. 20 FST A TE_V AL3 The preset analog value to use when failure occurs [...]

Reference Manual 00809-0100-2230, Rev BB August 2014 C-15 Rosemount 2230 Appendix C. F OUNDATION fieldbus Block Information C.6 SUPPORTED UNITS The 2230 Graphical Field Display supports the following units: T able C-8. T emperature T able C-9. Length T able C-10. V olume T able C-1 1. Level Rate T able C-12. Flow Rate DD V alue Display Description [...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 C-16 Appendix C. F OUNDATION fieldbus Block Information T able C-13. Pressure ID Display Description 1 130 Pa Pascal 1 133 kPa Kilo Pascal 1 137 Bar Bar 1 140 atm Atmospheres 1 141 psi Pounds / square inch 1 142 psiA Pounds / square inch (absolute) 1 143 psiG Pounds / square inch ([...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 www .rosemount-tg.com Index Symbols . . . . . . . . . . . . . . . . . . . . . . . . . 4-26 Numerics 2160 Field Communication Unit . 2-7 2230 Foundation fieldbus . . . . . . . 2-1 2410 . . . . . . . . . . . . . . . . . . . . . . 2-7 2410 Tank Hub . . . . . . . . . . . . . . 2-7 475 [...]

Rosemount 2230 Index-2 Reference Manual 00809-0100-2230, Rev BB August 2014 I IECEx Approval . . . . . . . . . . . . . . B-7 Input mapping . . . . . . . . . . . . . . 4-36 Input Registers . . . . . . . . . 5-3 , 5-20 Installation Electrical . . . . . . . . . . . . . . . 3-6 Mechanical . . . . . . . . . . . . . . 3-2 Procedure . . . . . . . . . . . [...]

Index-3 Rosemount 2230 Reference Manual 00809-0100-2230, Rev BB August 2014 Write Protect switch . . . . 3-15 , 5-25 Write Protection . . . . . . . . . . . . 5-25 WRITE_LOCK parameter . . . . . 4-27 X X1 terminal . . . . . . . . . . . . . . . . 3-1 1 X2 and X3 terminals . . . . . . . . . 3-1 1[...]

Rosemount 2230 Index-4 Reference Manual 00809-0100-2230, Rev BB August 2014[...]

[...]

Reference Manual 00809-0100-2230, Rev BB August 2014 Rosemount 2230 Emerson Process Management © 2014 Rosemount T ank Radar AB. All rights reserved. Rosemount and the Rosemount logotype are trademarks of Rosemount Inc. HART is a trademark of the HAR T Communication Foundation. PlantWeb is a trademark of one of the Emerson Process Management group [...]