Epson 1700C manuale d’uso

Epson ® PowerLite ® 1700c/1710c Multimedia Projector User’ s Guide[...]

2 Important Safety Information WARNING : Never look into th e projector lens when the la mp is turned on; the bright light can damage your eyes. Never let children look into the lens when it is on. Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical volta ges inside the projector can severe ly injure you. [...]

3 Contents Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Using Your Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Getting More Information . . . . . . . . . . . . . . . . . . . . . . . . 8 Registration and Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Unpacking the Pro[...]

4 2 Using the Remote Control . . . . . . . . . . . . . . . . . . . 25 Using the Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Replacing the Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Controlling the Picture and Sound . . . . . . . . . . . . . . . . . . . . 27 Switching Between Picture Sources . . . . . [...]

5 5 Fine-Tuning the Projector . . . . . . . . . . . . . . . . . . . 43 Using the Menu System . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Restoring the Default Settings . . . . . . . . . . . . . . . . . . . . 45 Adjusting the Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Adjusting Signal Settings . . . . . . .[...]

6 A Projector Installation . . . . . . . . . . . . . . . . . . . . . . . . 79 B Technical Specifications . . . . . . . . . . . . . . . . . . . . . 81 C Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . 87 Remote Control Information .[...]

7 - Welcome T he Epson ® PowerLite ® 1700c/1710c is an e asy-to-use projector that weighs less than 4 pounds. The projector offers u p to 2700 lumens (1710c) or 2200 lumens (1700c) of brightness. You can connect it to a wide range of computers and video sources. Easy control The projector’s keystone correction feature automatically corrects ima[...]

8 Welcome Using Your Documentation This book contains all the information you need to set up and use your projector. Please follow these guidelines as you read through it: ■ Warnings must be followed carefully to avoid bodily injury. ■ Cautions must be observed to avoid damage to your equipment. ■ Notes contain important information about you[...]

Welcome 9 ■ presentersonline.com Includes a library of articles covering presentation tips, tricks, and technology. The site provides templates, clip art and sound clips, as well as Presenters Services to use on the road. Even more resources and services are available if you register to join the Presenters Club ® —and it’s free. Registration[...]

10 Welcome Unpacking the Projector After unpacking the projector, make sure you have all the parts shown below: Save all packaging in case you need to ship the projector. Always use the original packaging (or th e equivalent) when you need to send the projector to another location. If you are moving the projector by hand, use the carrying case. See[...]

Welcome 11 Optional Accessories To enhance your use of the projector, Ep son provides the following optional accessories: You can purchase screens, carrying cases, or other accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463 -7766). Or you can purchase online at www.epsonstore.com (U.S. sales) or [...]

12 Welcome[...]

13 1 Displaying and Adjusting the Image W hether you’re presenting from a computer or video equipme nt, you need to follow some basic steps to display your image on the screen. Follow the guidelines in this chapter f or: ■ Positioning the projector ■ Turning the projector on and selecting the image source ■ Troubleshooting display problems [...]

14 Displaying and Adjusting the Image Positioning the Projector If the projector isn’t already installe d in the room you’re using, you’ll probably want to place it on a table in front of the screen, as shown. This lets you stand in the front of the room, face the audience, and remain close enough to the equipment to be able to control it. Tr[...]

Displaying and Adjusting the Image 15 Ideally, you should place the projector dire ctly in front of the center of the screen, f acing it toward the scre en squarely. The base of the lens should be at about the level of the bottom of the screen. If you place the projector below screen level, you’ll have to tilt it up by extending the front adjusta[...]

16 Displaying and Adjusting the Image Follow these steps to turn on the projec tor: 1. Open the A/V Mute slide (lens cover). 2. Plug one end of the power cable into the projector, and the other end into an electrical outlet. The Power light turns orange. note To shut down the projector, see page 23. Shutting down the projector correctly prevents pr[...]

Displaying and Adjusting the Image 17 3. Press the red P Power button on the remote control or on top of the projector. The projector beeps once and the Power light flash es green as the projector warms up, then an image begins to appear. When the Power light stops flashing and remains green, the projector is ready for use. 4. If you’ve connected[...]

18 Displaying and Adjusting the Image Troubleshooting Display Problems Follow these guidelines if you’re havin g trouble displaying an image. You Can’t Project an Image If you don’t see the image you are trying to project, try the following: ■ Make sure the cables are connected correctly, as described beginning on page 33. ■ Make sure the[...]

Displaying and Adjusting the Image 19 ■ If the function key doesn’t permit you to display simultaneously on both screens, you should check your monitor settings to make sure both the LCD screen and the ex ternal monitor port are enabled. From the Control Panel, open the Display utility. In the Display Properties dialog box, click the Settings t[...]

20 Displaying and Adjusting the Image Adjusting the Image Once you see your image, you need to make certain adjustments: ■ If the image is too high or too low, you can reposition it. See below. ■ To focus or zoom your image, see page 21. ■ If the image isn’t square, see p age 21. ■ If a computer image displays incorrectly, see page 23. ?[...]

Displaying and Adjusting the Image 21 Focusing and Zooming Your Image Turn the focus ring on the projector to sharpen the image. Turn the zoom ring on the projector to reduce or enlarge the image. If the image still isn’t large en ough, you may need to move the projector farther away from the sc reen. You can also use the E-Zoom buttons on the re[...]

22 Displaying and Adjusting the Image Using Keystone Correction To adjust your image when it is wider on the top or bottom, do the following: ■ Press one of the two triangular bu ttons on the projector’s control panel, as shown below. Continue pressing the button until you are satisfied with the shape of the image. ■ Or press the Menu button [...]

Displaying and Adjusting the Image 23 Correcting Computer Images If you’re connected to a computer and the imag e doesn’t look right, press the Auto button on the remote control or the Enter button on the projector. This automatically resets the projector’s tracking, sync, resolution, and position sett ings. If the Auto button doesn’t corre[...]

24 Displaying and Adjusting the Image 3. Press the P Power button again. The lamp turns off. When the projector beeps twice, you can unplug the power cord. (If the projector is mounted on the ceiling, you will need to wait 20 seconds for the projector to cool down before you can unplug the power cord.) If you want to turn the projector on again, ma[...]

25 1 Using the Remote Control T he projector includes a number of tools to enhance your presentation. All of them can be accessed using the remote control, which lets you operate the projecto r from anywhere in the room—up to 20 feet away. You can use the remote control to adjust the picture and sound (page 27) or as a pointer to highligh t your [...]

26 Using the Remote Control Using the Remote Control Follow these tips for using the remote control: ■ Point the remote control at the front of the projector or at the screen. ■ Stand within 20 feet of the projector. ■ Avoid using the remote under bright fluorescent lamps or in direct sunlight, or the projector may not respond properly. Repla[...]

Using the Remote Control 27 Controlling the Picture and Sound You can use the remote control to pr eview and select your pictur e sources, temporarily turn off the picture and sound, freeze the acti on, zoom in on the picture, and adjust the volume . Switching Between Picture Sources If your projector is connected to more than one computer and/or v[...]

28 Using the Remote Control Turning Off the Pi cture and Sound You can use the A/V Mute button on the remote control to turn off the image and sound. This feature is useful if you want to temporarily redirect your audience’s attention. ■ To turn off the picture and sound, press the A/V Mute button. The screen turns black. ■ To turn the image [...]

Using the Remote Control 29 Zooming Part of Your Image You can zoom in on a portion of the image using the E-Zoom buttons on the remote control. 1. Press the E-Zoom button on the remote control. You see a crosshair indicating the ce nter of the zoom-in area. 2. Use the pointer button to position the crosshair. 3. Continue pressing the E-Zoom button[...]

30 Using the Remote Control Resizing Video Images You can use the Resize button on the remote control to adjust how an image fits into the display area. For video images, press Resize to switch the aspect ratio between 4:3 and 16:9, (and Normal for computer images). This lets you play certain digital video images or movies recorded on certain DVDs [...]

Using the Remote Control 31 Operating Your Computer with the Remote Control If you connect a computer to the projector with a USB cable, as described on page 35, then select Link21L for the USB Type B setting in the Extended menu (see page 56), you can use the remote control in place of your computer’s mouse. This gives you more flexibility when [...]

32 Using the Remote Control Highlighting Your Presentation You can display a pointer to call out important information on the screen. If you want to customize the pointer tool, you can choose from three alternative shapes. Using the Pointer Tool 1. To activate the pointer tool, press the Pointer button on the remote control. A pointer appears on th[...]

33 1 Connecting to Computers and Other Equipment T his chapter tells you how to connect the projector to a notebook or desktop computer, and/or to video equipment, such as a VCR, DVD player, or video camera. Follow the instructions in this chapter on: ■ Connecting to a computer ■ Connecting video equipment ■ Playing sound through the projecto[...]

34 Connecting to Computers and Other Equipment Connecting to a Computer You can connect the projector to an y computer that has a standard video output (monitor) port, inclu ding desktop models, PC notebook and notebook computers, MacBook s, PowerBooks and iBooks, and hand-held devices. To conne ct to the blue Computer/ Component Video port (standa[...]

Connecting to Computers and Other Equipment 35 3. When you’ve finished making any connections, see page 15 for instructions on turning on the projector and adjusting the image. Connecting the Cable for Remote Mouse Control If you’ve connected a computer as described in this chapter (using the Computer/ Component Video port) and set the USB Type[...]

36 Connecting to Computers and Other Equipment 4. If necessary, configure your computer to work with an external USB mouse. See your computer documentation for det ails. Connecting to Video Equipment You can connect several video source s to the projector at the same time. Before starting, look at your video equipment to determine its available vid[...]

Connecting to Computers and Other Equipment 37 Connecting a Composite Video Source 1. Locate an RCA-style video cable (one is usually provided with your video equipment or you can purchase one from an electronics dealer). 2. Connect the cable to the yellow video output connector on your player and the yellow Video connector on the projec tor: 3. If[...]

38 Connecting to Computers and Other Equipment Connecting an S-Video Source 1. Locate an S-Video cable (one is usually provided with your video equipment or you can purchase one from Epson; see page 10). 2. Connect th e cable to th e S-Video connector on your player and the S-Video connector on the projector: 3. If you want to play sound through th[...]

Connecting to Computers and Other Equipment 39 Connecting a Component Video Source You will need a compone nt-to- VGA video cable or a component video-to-VGA adapter for this conne ction . You can order this cable (ELPKC19) from Epson; see page 11 for more information. 1. Locate a component-to-VGA video cable or adapter. 2. Connect the cable to you[...]

40 Connecting to Computers and Other Equipment Connecting an RGB Video Source 1. Locate the VGA computer cable p rovided with the projector. 2. Connect the cable to the video port on your player and the Computer/Com ponent port on the projector. 3. If you want to play sound through the projector, see page 40 for instructions on connecting audio cab[...]

Connecting to Computers and Other Equipment 41 ■ If you have a computer connected to the blue Computer/ Component Video port, use a ster eo mini-jack cable. ■ If you have video equipment connected to the Video or S-Video port, use an RCA-style audio cabl e and the audio adapter included with the projector. 2. Connect the other end of the cable [...]

42 Connecting to Computers and Other Equipment[...]

43 1 Fine-Tuning the Projector Y ou can use the projector’s on-screen menus to adjust the image, sound, and other features. This chapter covers the following information: ■ Using the menu system ■ Adjusting the image ■ Adjusting signal settings ■ Customizing projector features ■ Using the projector security features ■ Customizing powe[...]

44 Fine-Tuning the Projector Using the Menu System You can use the remote control or the projector’s control panel to access the menus and change settings. Follow these steps: 1. To display the menu screen, press the Menu button on the remote control or on the projector. You see a menu scre en similar to the one below: The menus are listed on the[...]

Fine-Tuning the Projector 45 4. After highlighting the option you want to adjust, use the pointer button to change the setting. In some cases, you may have to press the Enter button to view a sub-scre en for changin g the setting. ■ Press the left or right side of the pointer button to adjust a slider bar. ■ To select from two or more settings,[...]

46 Fine-Tuning the Projector Adjusting the Image You can use the Image menu to adjust the brightness, sharpness, color, tint, and contrast. 1. Press the Menu button on the projecto r or remote control and select the Image menu. You see the Image menu screen. 2. Use the pointer button to highlight the desired option, then adjust it as needed: ■ Co[...]

Fine-Tuning the Projector 47 Blackboard : For projecting accurate colors on a green chalkboard (adjusts the white point). Customized: For manual color adjustment. (See below.) ■ Brightness Lightens or darkens the overall image. ■ Contrast Adjusts the difference between light and dark areas. ■ Color Saturation (video only) Adjusts the color de[...]

48 Fine-Tuning the Projector You see a sc reen similar to on e of those below. (The settings wi ll be different depending on the so urce you are projecting from.) 2. Use the pointer button to highlight the desired option, then adjust it as needed: ■ Auto Setup Leave this setting On to automatically optimize the computer image. Turn it off if you [...]

Fine-Tuning the Projector 49 ■ Video Signal Leave this setting at Auto unless you are using a 60-Hz PAL system (then select PAL60 ). ■ Resize Choose an aspect ratio of either 4:3 or 16: 9 . Normal is the default setting for a computer connection. Customizing Projector Features You can use the Settings menu to lock the buttons on the projector, [...]

50 Fine-Tuning the Projector ■ Brightness Control Lets you select from two levels of brightness. The Low setting reduces power consumption and noise, and extends the lamp’s operating life. ■ Volume Raises or lowers the volume of the projector’s speaker. Using the Projector Security Features To prevent unauthorized use of the projector, you [...]

Fine-Tuning the Projector 51 The default setting for the Password Protect function is Off . Follow these steps to turn password protection on: 1. Press the Freeze button on the remote control for about five seconds. You see this screen: 2. Use the pointer button to set Power On Protect to On . Then press Enter . 3. Press Esc. 4. Select Password and[...]

52 Fine-Tuning the Projector The countdown for the elapsed time begins as soon as you close the Password Protect menu. (You can check the elapsed tim e in this menu next to Tim e elapsed .) 10. To enable your screen l ogo, select User’s Logo Protect and press Enter . Select On and press Enter . When this feature is on, th e logo appears whenever [...]

Fine-Tuning the Projector 53 If the password is not correct, you see a message prompting you to re-enter the password. If you ente r an incorrect password three times in succession, you see the message The projector’s operation will be locked. Request code xxxxx and the projector switches to standby mode for approximately 5 minutes. Write down th[...]

54 Fine-Tuning the Projector 2. Highli ght User’s Logo and press Enter . 3. When you see a message asking Choose this image as the user’s logo? , select Yes and press Enter . A selection box displays over the image. 4. Use the pointer button to select the area of the image you want to use. Then press Enter . 5. When you see th e message Selec t[...]

Fine-Tuning the Projector 55 2. Select Dis play and press Enter . 3. Highlight Display Background (for when there is no signal) or A/V Mute , and press Enter . 4. Select Logo and press Enter. 5. When you’re finished, press Esc to exit. Disabling the Projector’s Buttons When you enable the Operation Lock function, you can lock all the projector?[...]

56 Fine-Tuning the Projector ■ Display Use this setting to turn off the display of messages, change the background color, enable logo display, or turn off the startup screen display. ■ User’s Logo Create a custom startup screen, as described on page 53. ■ Projection Select Front (to project from the front of a screen and right side up), Fro[...]

57 1 Maintaining the Projector Y our projector needs little maintenance. All you have to do is keep the lens clean and periodically clean the air filter and vent. A clogged air filter or vent can block ventil ation needed to cool the projector. The only parts you should replace ar e the lamp and air filter. If any other part needs replacing, contac[...]

58 Maintaining the Projector Cleaning the Lens Clean the lens whene ver you notice dirt or dust on the surface. Use a canister of compressed air to remove dust. To remove dirt or smea rs on the lens, use lens-c leaning tissue. If necessary, moisten a soft cloth with lens cleaner and gently wipe the lens. Cleaning the Projector Case Before you clean[...]

Maintaining the Projector 59 Cleaning the Air Filter and Vent Clean the air filter and air intake vent after every 100 hours of use. If they are not cleaned periodically, th ey can bec ome clogged with dust , preventing proper ventilation. This can cause overheating and damage the projector. Follow these steps: 1. Turn off the projector. Wait for t[...]

60 Maintaining the Projector Replacing the Lamp and Air Filter The life span of the projection lamp is about 2000 hours if Brightness Control in the Setting menu is set to High (default), and 3000 hours if Brightness Control is set to Low . It is time to replace the lamp when: ■ The projected image gets darker or starts to deteriorate. ■ The me[...]

Maintaining the Projector 61 4. Loosen the lamp cover screw (you don’t need to remove it). Then slide the lamp cover to the side and lift it off of the projector. 5. Loosen the two screws holding the lamp in place (you can’t remove them). 6. Hold the l amp as shown and pull it straight out. 7. Gently insert the new lamp. (If it doesn’t fit ea[...]

62 Maintaining the Projector 8. Push down the corner marked PUSH until it snaps in. 9. Once the lamp is fully inserted, tigh ten its screws. 10. Replace the lamp cover, then tighten its screw. 11. Turn the projector over. 12. Slide the air filter out and remove it. 13. Slide in the new air filter until it clicks in place. 14. Reset the lamp timer a[...]

Maintaining the Projector 63 Resetting the Lamp Timer After you replace the lamp, you need to reset the lamp timer using the projector’s menus. 1. Press the Menu button on the remote control or on the projector’s control panel. You see the main menu. 2. Use the pointer button on the remote control (or the arrow buttons on the projector) to high[...]

64 Maintaining the Projector Transporting the Projector The projector contains many glass and precision parts. Follow these guidelines to prevent damage: ■ When shipping the projector for repairs, use the origin al packaging material if possible. If you do not have the original packaging, use equivalent materials, placing plenty of cushioning aro[...]

65 1 Solving Problems T his chapter helps you solve problems with your projector, and tells you how to contact technical support for problems you can’t solve yourself. The following information is included: ■ Using the projector’s on-screen help system ■ What to do when the projec tor’s status lights flash ■ Solving projector operation [...]

66 Solving Problems Using On-Screen Help If the image doesn’t look right or your audio isn’t working, you can get help by pressing the blue ? Help button on top of the projector or on the remote control. The following choices are available: ■ ”No Signal.” or no image appears on the screen ■ There is no soun d ■ Select a differe nt lan[...]

Solving Problems 67 Checking Projector Status If your projector isn’t working correctly, first turn it off, wait for it to cool (the Power light stops flashing orange), and unplug it. Then plug the power cord back in and turn on the projector. If thi s doesn’t solve the problem, check the lights on top of the projector. What To Do When the Ligh[...]

68 Solving Problems Flashing red There is a problem with the fa n or temperature sensor. Stop using the projector, disconnect the power cable , and contact Epson as describ ed on page 76. Flashing orange Rap id cooling is in progress. Although this is not an abnormal conditi on, projection will stop automatically if the temperature rises higher. Ma[...]

Solving Problems 69 Viewing Lamp Usage and Other In formation Use the Info menu to view information about the display settings of your computer and the number of hours the lamp has been used. Press the Menu button and high light the Info menu. You see the lamp usage hours and various input signal settings on the right. The life span of the lamp is [...]

70 Solving Problems Solving Problems with the Image or Sound No image appears on the screen. ■ Check that the Po wer light is green, not flashing. ■ The projector may be in standby or sleep mode. If the Power light is orange, press the P Power button to turn the projector on. ■ If the power was switched off and then on again, the projector ma[...]

Solving Problems 71 If you’re using a PC notebook: ■ Hold down the Fn key on the keyboard and press the function key that lets you display on an external monitor. It may have an icon such as , or it may be labelled CR T/LCD . Allow a few seconds for the projector to sync up after pressing it. Check your notebook’s manual or on line help for d[...]

72 Solving Problems ■ Press the Resize button on the remote control. ■ Press the Esc button on the remote control to cancel the E-Zoom function. ■ Make sure your computer’s resolution setting is correct. Ideally, it should be 1024 × 768 to match the projector’s native resolution. If this option isn’t available, se lect one of the other[...]

Solving Problems 73 ■ The video signal may be split between the computer and the projector. If you notice a decline in the projected image quality when the image is di splayed simultaneously on your notebook computer and the projector, turn off the notebook’s LCD display. ■ Make sure the correct input signal is selected in the Signal menu (se[...]

74 Solving Problems 2. Adjust the Tracking to eliminate vertical bands. 3. Adjust the Sync setting to increase the image sharpness. The image is too light or dark, or colors are incorrect. ■ If you’re displaying a computer image, use the Color Mode option in the projector’s Image menu to adjust the color (see page 46). ■ If you’re display[...]

Solving Problems 75 ■ Try adjusting the Volume setting in the Setting menu (see page 50). ■ If you’re using a VCR or other video source, make sure the volume is not turned all the way down or muted. Also, make sure the cables are connected correctly, as described on page 40. ■ If your presentation includes computer audio, make sure the volu[...]

76 Solving Problems ■ If any buttons are held for longer than 30 seconds, the remote enters sleep mode. Release any button that is held to wake the remote. Where To Get Help Epson provides these technical support services: Internet Support Visit Epson’s support website at http://support.epson.com and select your product for solutions to common [...]

Solving Problems 77 ■ Proof of purchase (such as a store receipt) and date of purchase ■ Computer or video configuration ■ Description of the problem Purchase Supplies and Accessories You can purchase screens, carrying cases, or other accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463 -7766[...]

78 Solving Problems[...]

79 A Projector Installation T his appendix provides guidelines on installing the projector in a permanent location, such as a theater or conference room. The projector can be installed for fo ur different viewing setups: front projection, ceiling projection, rear projection onto a semi-transparent screen, or rear/ceiling projection, as shown: To pr[...]

80 Projector Installation If you’re mounting the projector on the ceiling and you place it above screen level, you’ll have to tilt the projector down to position the image on the screen. This causes the image to lose its square shape. You can correct the distortion usi ng the Keystone function in the projector’s menu system (see page 49). If [...]

81 A Technical Specifications General Type of display Epson poly-silicon TFT active matrix Resolution (native format) 1024 × 768 pixels (XGA) Color reproduction 16.8 million colors Brightness 1700c 2200 lumens (High Brightness mode) 1700 lumens (Low Brightness mode) 1710c 2700 lumens (High Brightness mode) 2100 lumens (Low Brightness mode) Contras[...]

82 Technical Specifications Projection Lamp Type UHE (Ultra High Efficiency) Power consumption 170 W Lamp life Approx. 2000 hours (High Brightness mode) Approx. 3000 hours (Low Brightness mode) Part number V13H010L38 Remote Control Range 20 feet (6 meters) Batteries (2) Alkaline AAA Dimensions Height 2.7 inches (68 mm), feet retracted Width 10.7 in[...]

Technical Specifications 83 Environmental Temperature Operating: 41 to 95 °F (5 to 35 °C) Storage: 14 to 140 °F (–10 to 60 °C) Humidity (non-condensing) Operating: 20 to 80% RH Storage: 10 to 90 % RH Operating altitude 0 to 7,500 ft (0 to 2,286 m) Safety United States FCC 47CFR Part 15B Class B (DoC) UL60950 Third Edition Canada ICES-003 Clas[...]

84 Technical Specifications VGA—60 VESA—72 VESA—75 VESA—85 60 72 75 85 640 × 480 * 640 × 480 * 640 × 480 * 640 × 480 * SVGA—56 SVGA—60 SVGA—72 SVGA—75 SVGA—85 56 60 72 75 85 800 × 600 * 800 × 600 * 800 × 600 * 800 × 600 * 800 × 600 * XGA—60 XGA—70 XGA—75 XGA—85 60 70 75 85 1024 × 768 1024 × 768 1024 × 768 1024 [...]

Technical Specifications 85 * The image is resized using Epson’s SizeWise ™ Technology. HDTV (720p) HDTV (720p) HDTV (1080i) HDTV (1080i) 60 50 60 50 — — — — TV480i TV480i SDTV (480p) SDTV (480p) 60 50 60 50 — — — — Mode Refresh Rate (Hz) Resolution[...]

86 Technical Specifications[...]

87 A Notices T his appendix includes safety instru ctions and other important info rmation about your Epson PowerLite projector. Important Safety Instructions Follow these safety instructions when setting up and using the projector: ■ Do not place the projector on an unstable cart, stand, or table. ■ Do not use the projector near water or sourc[...]

88 Notices ■ Except as specifically explained in this User’s Guide , do not attempt to service this product yourself. Refer all servicing to qualified personnel. Opening or removing covers may expo se you to dangerous voltages and other hazards. ■ Unplug the projector from the wall outl et and refer servicing to qualified service personnel un[...]

Notices 89 Remote Control Information You can operate the projector by remote control via a line-of-sight infrared (IR) receiver at the front and rear of the projector. The projector may not respond to remote control commands under the follow ing conditions: ■ There is an object between the remote control IR emitter and the IR receiver on the pro[...]

90 Notices Declaration of Conformity According to 47CFR, Part 2 and 15, Class B Personal Computers and Peripherals; an d/or CPU Boards and Power Suppli es used with Class B Personal Computers We: Epson America, Inc. Located at: 3840 Kilroy Airport Way MS: 3-13 Long Beach, CA 90806-2469 Telephone: (562) 290-5254 Declare under sole responsibility tha[...]

Notices 91 FCC Compliance Statement For United States Users This equipment has been tested and fo und to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecti on against harmful interference in a residential installation. This equipment generates, uses, an[...]

92 Notices Warranty Epson America, Inc. Limited Warranty Basic Two-Year Warranty and 90-Day Lamp Warranty What Is Covered: Epson America, Inc. (“Epson” ) warrants to the original retail purchaser of the Epson product enclosed with this limited warranty statement that the product, if purcha sed new and operated in the United States or Canada, wi[...]

Notices 93 THE WARRANTY AND REMEDY PROVIDED ABOV E ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES INCLUDIN G, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABI LITY OR FITNESS FOR A PARTICULAR PURPOSE. SOME LAWS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES. IF THESE LAWS APPLY, THEN ALL EXPRESS AND IMPLIED WARRANTI[...]

94 Notices[...]

Index A A/V Mute, 28, 54, 70 Accessories, 11 Adapter, audio, 10, 41 Air filter cleaning, 59 ordering, 11 replaci ng, 60 to 62 Altitude, 56, 83 Anti-theft device, 11, 15 Aspect ratio, 81 Audio adapter, 10, 41 controlling volume, 29 problems, troubleshooting, 74 to 75 turning off (using A/V Mute), 28 Auto button, 23 Auto Setup setting, 48 B Bands, ve[...]

96 Index F FCC compliance statement, 91 Filter, see Air filter Focusing image, 21 Freeze button, 28 G Game color mode, 30, 46 H HDTV images, video formats, 85 Height of image, adjusting, 20 Help, 76 to 77 Help system, using, 66 Help, Epson, 8 High altitude, 56, 83 I Image adjusting, 20 to 23, 46 to 47 blurry, 73 capturing and saving in projector, 5[...]

Index 97 O Operation Lock setting, 55 Optical aspect ratio, 81 Options for projector, 11 P Password protection, 50 to 53 request code, 53 Photo color mode, 30, 46 Picture source, selecting, 17, 27, 37 to 40 Picture, see Image Pointer tool, using, 32 Positioning image, 20 projector, 14 to 15, 79 to 80 Power button, 17 specif ications, 82 status lig [...]

98 Index Resize image, 30 Resolution, 30, 71, 81 S Safety instructions, 87 to 88 specif ications, 83 Saturation setting, 47 Screen blank, 18 to 19 distance from projector, 14 ordering, 11 startup screen, creating, 53 to 54 Screen image, See Image Security Kensington lock, 11 password protection, 50 to 53 Sharpness setting, 47 Signal menu, 47 to 49 [...]

Index 99 W Warning lights, 67 to 68 Warranty , 9, 92 to 93 Windows display problems, 71 resolution setting, 72 Wireless, mouse, 31, 35 to 36 Z Zoom ratio, 81 Zooming image, 21, 29[...]

100 Index[...]