Epson 3000/3500/3510/3600e manuale d’uso

PowerLite ® Home Cinema 3000/3500/3510/3600e User's Guide[...]

[...]

Contents PowerLite Home Cinema 3000/3500/3510/3600e User's Guide ................................................................ 9 Introduction to Your Projector ................................................................................................................. 10 Projector Features ..............................................[...]

Connecting to a Computer for Sound ........................................................................................ 36 Connecting to External Speakers .................................................................................................. 36 Connecting to External USB Devices ......................................................[...]

Changing the Projection Mode Using the Menus ........................................................................... 64 Image Aspect Ratio ............................................................................................................................ 65 Changing the Image Aspect Ratio ...............................................[...]

Image Quality Settings - Image Menu ................................................................................................ 92 Input Signal Settings - Signal Menu.................................................................................................... 94 Projector Feature Settings - Settings Menu ................................[...]

Solutions When the Image is Fuzzy or Blurry .............................................................................. 135 Solutions When the Image Brightness or Colors are Incorrect .................................................... 136 Solutions When a 3D Image Does Not Display Correctly .....................................................[...]

[...]

PowerLite Home Cinema 3000/3500/3510/3600e User's Guide Welcome to the PowerLite Home Cinema 3000/3500/3510/3600e User's Guide . Note: The availability of models may vary by region. 9[...]

Introduction to Your Projector Refer to these sections to learn more about your projector and this manual. Projector Features Notations Used in the Documentation Where to Go for Additional Information Projector Part Locations Projector Features The PowerLite Home Cinema 3000, 3500, 3510, and 3600e projectors include these special features: Bright, [...]

Easy-to-use setup and operation features • Vertical and horizontal lens shift dials for flexible projector placement • 1.6× optical zoom ratio for improved zooming capability Note: The PowerLite Home Cinema 3600e projector is shown in most illustrations in this manual, unless noted otherwise. Product Box Contents Additional Components Optional[...]

1 Projector with lens cap 2 Remote control 3 Remote control batteries (two AA alkaline) 4 Power cord 5 3D glasses (2 pairs for PowerLite Home Cinema 3500/3510/3600e) 6 3D glasses charging cable (2 cables for PowerLite Home Cinema 3500/3510/3600e) 7 WirelessHD transmitter (PowerLite Home Cinema 3600e) 8 WirelessHD transmitter AC adapter (PowerLite H[...]

• To project with audio from certain ports, you may need a commercially available audio cable compatible with your device (PowerLite Home Cinema 3500/3510/3600e). See your local computer or electronics dealer for purchase information. • To add additional sound, you need speakers, an audio video receiver or a video source with speaker connection[...]

Option or part Part number Kensington security lock ELPSL01 Remote control 1631362 In addition to the accessories listed above, 1-year and 2-year extended service plans are available. Parent topic: Projector Features Warranty and Registration Information Your projector comes with a basic warranty that lets you project with confidence. For details, [...]

• For detailed instructions on using your projector in a network environment, see the EasyMP Network Projection Operation Guide . • If you still need help after checking this manual and the sources listed above, you can use the Epson PrivateLine Support service to get help fast. For details, see "Where to Get Help". Parent topic: Intr[...]

1 Lamp cover 2 Exhaust vent 3 Focus ring 4 Lens cap 5 Lens 6 Zoom ring 7 Remote receiver 8 Front adjustable foot 9 Air filter cover and vent 10 Vertical lens shift dial 11 Horizontal lens shift dial 12 Control panel Parent topic: Projector Part Locations 16[...]

Projector Parts - Rear 1 Speakers (PowerLite Home Cinema 3500/3510/3600e) 2 AC input port 3 Trigger out port 4 RS-232C port 5 Audio ports (PowerLite Home Cinema 3500/3510/3600e) 6 Component ports 7 Security cable attachment point 8 Audio Out port (PowerLite Home Cinema 3500/3510/3600e) 9 Cable holder 10 Remote receiver 11 USB Type A port 17[...]

12 Service port 13 Video port 14 HDMI 2 port 15 PC port 16 HDMI 1/MHL (PowerLite Home Cinema 3500/3510/3600e) or HDMI 1 (PowerLite Home Cinema 3000) port Parent topic: Projector Part Locations Related tasks Installing a Security Cable Projector Parts - Base 1 Front adjustable feet 2 Mounting bracket holes 3 Intake vent Parent topic: Projector Part [...]

Projector Parts - Control Panel 1 Lamp light 2 Status light 3 Power button/light 4 Source button (cycles through the list of sources) 5 Volume control buttons, horizontal keystone adjustment buttons (adjust screen shape), and arrow buttons 6 Vertical keystone adjustment buttons (adjust screen shape) and arrow buttons 7 Brightness sensor 8 Esc butto[...]

Projector Parts - Remote Control 1 On button (turns on projector) 2 P-in-P button (controls the Picture-in-Picture mode) 3 Source buttons (select specific video input sources) 20[...]

4 HDMI Link button (displays the settings menu for HDMI Link) Link Menu button (displays the main menu of the connected device) Control buttons (control playback and other features of connected devices that support the HDMI CEC or MHL standard) 5 3D Format button (changes the 3D format) 6 Arrow buttons (move though on-screen options) 7 Default butt[...]

23 Mute button (turns off sound only; PowerLite Home Cinema 3500/3510/3600e) 24 Illumination button (temporarily lights the remote control buttons) 25 Standby button (turns off the projector) Parent topic: Projector Part Locations 22[...]

Setting Up the Projector Follow the instructions in these sections to set up your projector for use. Projector Placement Projector Connections Installing Batteries in the Remote Control Projector Placement You can place the projector on almost any flat surface to project an image. You can also install the projector in a ceiling mount if you want to[...]

Rear Front Ceiling Rear Ceiling Wherever you set up the projector, make sure to position it squarely in front of the center of the screen, not at an angle, if possible. If the projector cannot be centered in front of the screen, use lens shift to reposition the image instead of using keystone correction for better image quality. If you project from[...]

Parent topic: Projector Placement Related references Projector Feature Settings - Settings Menu Projection Distance The distance at which you place the projector from the screen determines the approximate size of the image. The image size increases the farther the projector is from the screen, but can vary depending on the zoom factor, aspect ratio[...]

Horizontal lens shift adjustment 1 Screen or image size 2 Distance between projector and screen 3 Distance from center of lens to bottom of the projected image when the lens is shifted to the highest position 4 Distance from center of lens to bottom of the projected image when the lens is shifted to the lowest position 5 Distance the projected imag[...]

Screen or image size (1) Projection distance (2) Wide to Tele 40 inches (101.6 cm) 46 to 75 inches (116 to 190 cm) 60 inches (152.4 cm) 69 to 113 inches (176 to 286 cm) 80 inches (203.2 cm) 93 to 150 inches (235 to 382 cm) 100 inches (254 cm) 116 to 188 inches (295 to 478 cm) 120 inches (304.8 cm) 139 to 226 inches (354 to 575 cm) 150 inches (381 c[...]

Screen or image size (1) Projection distance (2) Wide to Tele 40 inches (101.6 cm) 56 to 92 inches (143 to 233 cm) 60 inches (152.4 cm) 85 to 138 inches (216 to 351 cm) 80 inches (203.2 cm) 114 to 184 inches (288 to 468 cm) 100 inches (254 cm) 142 to 231 inches (361 to 586 cm) 120 inches (304.8 cm) 171 to 277 inches (434 to 704 cm) 150 inches (381 [...]

Projector Connections You can connect the projector to a variety of computer, video, and audio sources to display presentations, movies, or other images, with or without sound (audio available only for PowerLite Home Cinema 3500/3510/3600e). • For video projection, connect devices such as DVD players, gaming consoles, streaming devices, digital c[...]

Removing and Attaching the Cable Cover Before you can connect equipment to your projector, you need to remove the cable cover (PowerLite Home Cinema 3600e). Use coins or your fingernails to lift up and out on the gaps at the bottom of the cable cover, then remove the cable cover. To attach the cable cover, insert the top end first, then push the ca[...]

2. Connect the other end to one of the projector's HDMI ports. Note: If you connected a game console, it may take a few seconds for your image to appear when you switch to the game console's input source. To reduce the potential lag in response time to game commands, set your game console's output format to a progressive signal of 48[...]

3. Connect the other end of the cable to projector's HDMI 1/MHL port or the WirelessHD transmitter's HDMI 5 / MHL (IN) port. Parent topic: Connecting to Video Sources Connecting to a Component Video Source If your video source has component video ports, you can connect it to the projector using an optional component video cable. Depending[...]

Note: If you connected a game console, it may take a few seconds for your image to appear when you switch to the game console's input source. To reduce the potential lag in response time to game commands, set your game console's output format to a progressive signal of 480p, 720p, or higher. See your game console documentation for instruc[...]

Note: If you connected your video source to the projector using an HDMI or MHL cable, the audio signal is transferred with the video signal; you do not need an additional cable for sound. 1. Connect the audio cable to your video source's audio-out ports. 2. Connect the other end of the cable to the projector's Audio port or ports. Note: T[...]

1. If necessary, disconnect your computer's monitor cable. 2. Connect the VGA computer cable to your computer's monitor port. 3. Connect the other end to a PC port on the projector. 4. Tighten the screws on the VGA connector. Parent topic: Connecting to Computer Sources Related tasks Connecting to a Computer for Sound Connecting to a Comp[...]

Parent topic: Connecting to Computer Sources Connecting to a Computer for Sound If your computer presentation includes sound and you did not connect it using the projector's HDMI port, you can still play sound through the projector's speaker system (PowerLite Home Cinema 3500/3510/3600e). Connect an optional stereo mini-jack adapter cable[...]

4. Connect the stereo mini-jack end of the cable to your projector's Audio Out port. Parent topic: Projector Connections Connecting to External USB Devices Follow the instructions in these sections to connect external USB devices to the projector. USB Device Projection Connecting a USB Device or Camera to the Projector Selecting the Connected [...]

• Formatted in FAT or FAT32 • Self-powered by their own AC power supplies (bus-powered hard drives are not recommended) • Avoid using hard drives with multiple partitions You can project slide shows from image files on a connected USB device or memory card reader. Parent topic: Connecting to External USB Devices Related references Supported S[...]

2. Press the USB/LAN button on the remote control. 3. Press the button again to cycle through other USB sources, if available. Parent topic: Connecting to External USB Devices Disconnecting a USB Device or Camera From the Projector When you finish presenting with a connected USB device or camera, you must prepare to disconnect the device from the p[...]

2. Insert the batteries with the + and – ends facing as shown. 3. Replace the battery cover and press it down until it clicks into place. Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat or flame. Keep batteries out of the reach of children; they are choking hazards and are very dangerous if swall[...]

Wireless Network Projection You can send images to your projector through a wireless network. To do this, you must install the Epson 802.11b/g/n wireless LAN module, and then set up your projector and computer for wireless projection. Note: The wireless LAN module is not included with your projector. You can connect the projector to your wireless n[...]

Insert the wireless LAN module into the USB Type A port. The light on the wireless LAN module turns on when the module is installed and operating. The light flashes when the module is communicating over the network. Parent topic: Wireless Network Projection Related references Optional Equipment and Replacement Parts Selecting Wireless Network Setti[...]

3. Select the Network menu and press Enter . 4. Select Network Configuration and press Enter . 5. Select the Basic menu and press Enter . 6. Select the Projector Name setting and enter a name up to 16 alphanumeric characters long to identify the projector over the network. Note: Use the displayed keyboard to enter the name. Press the arrow buttons [...]

7. Select the Wireless LAN menu and press Enter . 8. Select the settings on the Wireless LAN menu as necessary for your network. Note: Some items may be unavailable if Quick or Advanced connection mode is selected. 9. When you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus. [...]

Setting Options Description Connection Mode Quick Selects the type of wireless connection: Advanced Quick : lets you quickly connect to one computer, smartphone, or tablet Advanced : lets you connect a wireless network access point Channel 1ch In Quick connection mode, selects the frequency band 6ch (channel) used by the wireless 11ch LAN SSID Up t[...]

Selecting Wireless Network Settings in Windows Before connecting to the projector, select the correct wireless network on your computer. 1. To access your wireless utility software, access the Desktop and double-click the network icon on the Windows taskbar. 2. Do one of the following: • If your projector is set up on an existing network (Advance[...]

4. Select the Security menu and press Enter . 5. Select the security settings for your network. 6. When you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus. Wireless Security Menu Settings Parent topic: Wireless Network Projection Wireless Security Menu Settings Settings on t[...]

Using Basic Projector Features Follow the instructions in these sections to use your projector's basic features. Turning On the Projector Turning Off the Projector Viewing 3D Images Selecting the Language for the Projector Menus Adjusting the Image Height Adjusting the Image Position Using Lens Shift Image Shape Resizing the Image with the Zoo[...]

1. Remove the projector's lens cover. 2. Connect the power cord to the projector's power inlet. 3. Plug the power cord into an electrical outlet. Note: With Direct Power On turned on, the projector turns on as soon as you plug it in. The projector's power light turns blue. This indicates that the projector is receiving power. 4. Pres[...]

Warning: Never look into the projector lens when the lamp is on. This can damage your eyes and is especially dangerous for children. If you do not see a projected image right away, try the following: • Turn on the connected computer or video device. • Insert a DVD or other video media and press the play button, if necessary. • Press the Sourc[...]

2. To transport or store the projector, make sure the Status light is off, then unplug the power cord. Caution: To avoid damaging the projector or lamp, never unplug the power cord when the Status light is on or flashing. 3. Replace the projector's lens cover. Parent topic: Using Basic Projector Features Viewing 3D Images You can view 3D image[...]

You can purchase Epson RF 3D glasses from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at epsonstore.com (U.S. sales) or epson.ca (Canadian sales). 1. Connect a 3D-compatible video device to the projector using a compatible HDMI cable. 2. Turn on the video device, then turn[...]

3D Viewing Range Parent topic: Using Basic Projector Features Pairing the 3D Glasses with the Projector Pair the glasses with the projector to establish communication between them for 3D viewing. 1. Turn on the projector. 2. Set the image source to HDMI. 3. Project a 3D image. 4. Slide the power switch on the 3D glasses to the On position. 5. Move [...]

Charging the 3D Glasses Charge the glasses when the status light on the glasses flashes red to indicate a low battery. 1. Connect the smaller end of the charging cable to the port on the bridge of the glasses. Note: Make sure you connect the cable in the correct orientation or you may damage the glasses or cable. 2. Connect the other end of the cab[...]

3D Viewing Range When you view 3D images, make sure you are positioned within the viewing range shown here. 1 32 ft (10 m) Parent topic: Viewing 3D Images Selecting the Language for the Projector Menus If you want to view the projector's menus and messages in another language, you can change the Language setting. 1. Turn on the projector. 2. P[...]

3. Select the menu and press Enter . 4. Select the Language setting and press Enter . 5. Select the language you want to use and press Enter . 6. Press Menu or Esc to exit the menus. Parent topic: Using Basic Projector Features Adjusting the Image Height If you are projecting from a table or other flat surface, and the image is too high or low, you[...]

3. Use the vertical and horizontal lens shift dials on the projector to adjust the position of the projected image as necessary. If the projected image is unevenly rectangular, you need to adjust the image shape. Parent topic: Using Basic Projector Features Related concepts Image Shape Related tasks Adjusting the Image Position Using Lens Shift Adj[...]

2. Turn the vertical and horizontal lens shift dials on the projector to adjust the position of the projected image as necessary. 1 Center of lens 2 Projected image when lens shift is set in the center 3 V × 60% 58[...]

4 H × 24% Note: You cannot move the image to both the horizontal and vertical maximum values. Follow these guidelines when using lens shift to adjust your images: • When adjusting the image height, position the image lower than where you want it to be and then move it up using the vertical lens shift dial. This will help prevent the image from m[...]

2. Press one of these keystone buttons on the control panel to display the Keystone adjustment screen. 3. Press a keystone button on the projector's control panel to adjust the image shape. After correction, your image is slightly smaller. Note: If the projector is installed out of reach, you can also correct the image shape with the remote co[...]

Resizing the Image with the Zoom Ring 1. Turn on the projector and display an image. Wait 30 minutes after turning on the projector before setting the focus, zoom, and lens shift for maximum accuracy. Note: You can display a pattern to aid in adjusting the projected image using the Pattern button on the remote control. 2. To enlarge or reduce the i[...]

2. To sharpen the image focus, rotate the projector’s focus ring. Parent topic: Using Basic Projector Features Remote Control Operation The remote control lets you control the projector from almost anywhere in the room. You can point it at the screen, or the front or back of the projector. Make sure that you aim the remote control at the projecto[...]

Horizontal 1 32 feet (10 m) 2 ± 30° Note: Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or the projector may not respond to commands. If you will not use the remote control for a long time, remove the batteries. Parent topic: Using Basic Projector Features Selecting an Image Source If you conne[...]

• Press the button for the source you want on the remote control. If there is more than one port for that source, press the button again to cycle through the sources. 1 HDMI port sources 2 Component source 3 Composite video source 4 USB and network port sources 5 WirelessHD sources (PowerLite Home Cinema 3600e) 6 PC port (VGA) source Parent topic[...]

1. Turn on the projector and display an image. 2. Press the Menu button. 3. Select the Settings menu and press Enter . 4. Select the Projection setting and press Enter . 5. Select a projection mode and press Enter . 6. Press Menu or Esc to exit the menus. Parent topic: Projection Modes Image Aspect Ratio The projector can display images in differen[...]

Changing the Image Aspect Ratio You can change the aspect ratio of the displayed image to resize it. Note: For HDMI sources, the input signal determines the image's aspect ratio. 1. Turn on the projector and switch to the image source you want to use. 2. Press the Aspect button on the remote control. A list of the available aspect ratios appea[...]

Aspect ratio setting Description Full Displays images using the full width of the projection area, but does not maintain the aspect ratio. Note: The Auto aspect ratio setting is available only for HDMI, component, and WirelessHD image sources. Parent topic: Image Aspect Ratio Color Mode The projector offers different Color Modes to provide optimum [...]

3. Press the Color Mode button on the remote control to change the Color Mode. A list of available Color Modes appears. 4. To cycle through all the available Color Modes for your input signal, press the up or down arrow button. 5. Press Enter to select a Color Mode. Parent topic: Color Mode Available Color Modes You can set the projector to use the[...]

Parent topic: Color Mode Turning On Auto Iris In certain color modes, you can turn on the Auto Iris setting to automatically optimize the image based on the brightness of the content you project. 1. Turn on the projector and switch to the image source you want to use. 2. Press the Menu button. 3. Select the Image menu and press Enter . 4. Select th[...]

Note: You cannot use Picture in Picture while projecting 3D images or when Image Processing is set to Fast in the Signal menu. 1. Press the P-in-P button on the remote control. The second HDMI video source appears as a sub-screen in the corner of the image. Note: While Picture in Picture mode is active, press the Menu button on the remote control t[...]

Parent topic: Using Picture in Picture Controlling the Volume with the Volume Buttons You can use the Volume buttons on the projector or the remote control to adjust the volume as you project a presentation with audio. The volume buttons control the projector’s internal speaker system or any external speakers you connected to the projector (Power[...]

Related concepts USB Device Projection Related tasks Connecting a USB Device or Camera to the Projector Supported Slideshow File Types You can project these types of files using the projector's Slideshow feature. Note: For best results, place your files on media that is formatted in FAT16/32. File contents File type Details (extension) Image .[...]

1. Press the USB/LAN button on the projector remote control. The Slideshow screen appears. 2. Do the following as necessary to locate your files: • If you need to display files inside a subfolder on your device, press the arrow buttons to highlight the folder and press the Enter button. • To move back up a folder level on your device, highlight[...]

5. To stop the display, follow the on-screen instructions or press the Esc button. Slideshow Display Options Parent topic: Projecting a Slide Show Related tasks Connecting a USB Device or Camera to the Projector Disconnecting a USB Device or Camera From the Projector Slideshow Display Options You can select these display options when using the proj[...]

Setting Options Description Screen Switching No Does not display the next file automatically Time 1 Second to 60 Seconds Displays files for the selected time and switches to the next file automatically; high resolution images may switch at a slightly slower rate Effect Wipe Transitions between images with a wipe effect Dissolve Transitions between [...]

Adjusting Projector Features Follow the instructions in these sections to use your projector's feature adjustments. Shutting Off the Picture and Sound Temporarily Adjusting the Color Convergence (Panel Alignment) Saving Settings to Memory and Using Saved Settings Projector Security Features Shutting Off the Picture and Sound Temporarily You ca[...]

1. Turn on the projector. 2. Press the Menu button. 3. Select the Settings menu and press Enter . 4. Select the Panel Alignment setting and press Enter . 5. Select the Panel Alignment setting and press Enter . 6. Select On and press Enter . 7. Select the Select Color setting and choose one of the following: • R to adjust the red color convergence[...]

You see this screen: 11. Press Enter . You see a screen like this: 12. Use the arrow buttons on the remote control to adjust the color alignment of the color you selected for the Select Color setting. Note: Your adjustments affect the gridlines in the entire screen. You can fine-tune your adjustments by continuing with the next steps. 13. When you [...]

You see this screen: 14. Select Adjust the four corners and press Enter . 15. Use the arrow buttons on the remote control to adjust the color alignment in the corner of the screen highlighted by the orange box. 16. Press the Enter button to move to the next corner of the screen. 17. When you are finished adjusting each corner of the screen, press E[...]

You see this screen: 18. Do one of the following: • If your projector's panel alignment is now correct, select Exit and press Enter to return to the Panel Alignment menu. • If your projector needs additional panel alignment, select Select intersection and adjust and press Enter . Use the arrow keys on the remote control to highlight the co[...]

3. You see this screen: 4. Select one of the following options: • Load Memory : Overwrites your current settings with saved settings • Save Memory : Saves your current settings to memory (10 memories with different names are available) Note: A memory name that has already been used is indicated by a blue mark. Saving over a previously saved mem[...]

• Security cabling to physically cable the projector in place. Locking the Projector's Buttons Installing a Security Cable Parent topic: Adjusting Projector Features Locking the Projector's Buttons You can lock the buttons on the projector's control panel to prevent anyone from using the projector. Note: You can use the remote cont[...]

• To lock all buttons except the power button, select Control Panel Lock . The lock icon is displayed on the screen if any control panel buttons are pressed while this setting is enabled. You see a confirmation prompt. 5. Select Yes and press Enter . 6. Restart the projector for the lock settings to take effect. Unlocking the Projector's But[...]

Using WirelessHD You can use the included WirelessHD transmitter to wirelessly stream HD content from a video device to the projector (PowerLite Home Cinema 3600e). WirelessHD Transmitter Parts WirelessHD Transmitter Placement Connecting the WirelessHD Transmitter Viewing WirelessHD Content Switching WirelessHD Sources Using the WirelessHD Picture [...]

7 HDMI (OUT) port (connects to display devices such as a television) 8 HDMI input ports (connect to your input devices; HDMI/MHL port on the side of transmitter) 9 3D glasses charging port (connects a USB cable to charge the 3D glasses) 10 Setup button (press for 5 seconds to reset the transmitter's settings) 11 power light (lights green when [...]

1. Plug the AC adapter into the AC input port on the WirelessHD transmitter and into an electrical outlet. 2. Connect HDMI cables to your video devices and to the HDMI input ports on the side and back of the WirelessHD transmitter. Note: You can connect an MHL-compatible smartphone or tablet to the HDMI 5 / MHL (IN) port on the WirelessHD Transmitt[...]

3. To use the WirelessHD transmitter as a pass-through device to a television or other display, connect an HDMI cable to the display device and to the HDMI (OUT) port on the back of the transmitter. Parent topic: Using WirelessHD Viewing WirelessHD Content You can project content wirelessly from any device connected to the WirelessHD transmitter. 1[...]

Switching WirelessHD Sources If you have connected multiple HDMI input sources to your WirelessHD transmitter, you can use the projector remote control to switch between sources. 1. Aim the remote control at the WirelessHD transmitter. 2. Press the Input button on the remote control or the WirelessHD transmitter. You see this screen: 88[...]

3. Press the Input button repeatedly to highlight different input sources. 4. When you have highlighted the source you want to switch to, release the Input button. After a few seconds, the display switches to the highlighted source. Parent topic: Using WirelessHD Using the WirelessHD Picture in Picture Feature If you have connected multiple video s[...]

Adjusting the Menu Settings Follow the instructions in these sections to access the projector menu system and change projector settings. Using the Projector's Menus Image Quality Settings - Image Menu Input Signal Settings - Signal Menu Projector Feature Settings - Settings Menu Projector Memory Options - Memory Menu Projector Network Settings[...]

You see the menu screen displaying the Image menu settings. 2. Press the up or down arrow button to move through the menus listed on the left. The settings for each menu are displayed on the right. Note: The available settings depend on the current input source. 3. To change settings in the displayed menu, press Enter . 4. Press the up or down arro[...]

Image Quality Settings - Image Menu Settings on the Image menu let you adjust the quality of your image for the input source you are currently using. The available settings depend on the currently selected input source. To change settings for an input source, make sure the source is connected and select that source. Setting Options Description Colo[...]

Setting Options Description Sharpness Varying levels available Adjusts the sharpness or softness of image details Color Temp. (color temperature) Varying levels available Sets the overall color tone; higher values tint the image blue and lower values tint the image red Advanced Gamma Selects the various detailed color settings RGB Gamma : adjusts t[...]

Related concepts Color Mode Input Signal Settings - Signal Menu Normally the projector detects and optimizes the input signal settings automatically. If you need to customize the settings, you can use the Signal menu. The available settings depend on the currently selected input source. To change settings for an input source, make sure the source i[...]

Setting Options Description 3D Setup 3D Display Selects various 3D options 2D-to-3D Conversion 3D Display : enables 3D mode (PowerLite Home Cinema 2D-to-3D Conversion : converts 3500/3510/3600e) 2D images to 3D 3D Format 3D Format : selects the 3D format 3D Depth 3D Depth : sets the depth for the Diagonal Screen Size 3D image 3D Brightness Diagonal[...]

Setting Options Description Deinterlacing * Off Sets whether to convert interlaced to progressive signals Video for certain video image types Film/Auto Off : for fast-moving video images Video : for most video images Film/Auto : for movies, computer graphics, and animation Motion Detection 1 to 5 Selects how the image is converted to a progressive [...]

Setting Options Description Advanced Noise Reduction Noise Reduction : reduces flickering in analog images in Setup Level three levels Overscan Setup Level : adjusts the level at HDMI Video Range which dark areas of the image are rendered black; leave this Image Processing setting at 0% for most video equipment; check your video equipment specifica[...]

Related tasks Viewing 3D Images Projector Feature Settings - Settings Menu Options on the Settings menu let you customize various projector features. Setting Options Description H/V-Keystone V-Keystone Adjusts the angle of the horizontal and vertical sides in the projected image H-Keystone Audio Volume Adjusts the projector's audio output (Pow[...]

Setting Options Description HDMI Link Device Connections Adjusts the HDMI Link options so you can use the projector remote to control HDMI Link HDMI-connected devices that support Audio Out Device the CEC standard Power On Link Device Connections : lists the devices connected to the HDMI 1 and HDMI 2 Power Off Link ports, or to the WirelessHD trans[...]

Setting Options Description WirelessHD Device Connections Adjusts settings for use with the WirelessHD transmitter (PowerLite Home Cinema WirelessHD 3600e) Device Connections : displays a list of Reception available WirelessHD devices WiHD Mode WirelessHD : controls whether the Reset projector receives WirelessHD signals Reception : displays the st[...]

Setting Options Description Picture in Picture See the list of available Adjusts the size and location of the sub- Picture in Picture options screen, swaps sources, and exits Picture in Picture mode Operation Direct Power On Selects various operation options Sleep Mode Direct Power On : turns on the projector when you plug it in Illumination Sleep [...]

Setting Options Description Panel Alignment Panel Alignment Corrects color misalignment in the projected image Select Color Panel Alignment : enables adjustments Pattern Color for color convergence (the alignment of Start Adjustments the red and blue colors in the projected image) Reset Select Color : specifies the color convergence to correct Patt[...]

Projector Memory Options - Memory Menu Your projector comes with 10 memory locations where you can save customized settings to obtain the best picture quality for each of your video inputs. Setting Description Load Memory Displays the list of customized settings entries that you have created; select an entry and press Enter on the remote control to[...]

Projector Network Settings - Network Menu Settings on the Network menu let you view network information and set up the projector for control over a network. Setting Options Description Net. Info - Wireless LAN Connection mode Displays wireless network status and details Wireless LAN system Antenna level Projector Name SSID DHCP IP Address Subnet Ma[...]

Parent topic: Adjusting the Menu Settings Projector Information Display - Info Menu You can display information about the projector and input sources by viewing the Info menu. However, you cannot change any settings in the menu. The information displayed depends on the currently selected input source. Note: The lamp usage timer does not register an[...]

Setting Options Description Projector Info Lamp Hours Displays the number of hours ( H ) the lamp has been used in each Power Consumption mode; if the information is displayed in yellow, obtain a genuine Epson replacement lamp soon Source Displays the name of the port to which the current input source is connected Input Signal Displays the input si[...]

Setting Options Description Version Main Displays the firmware version of the projector Video Video2 Event ID Code List Parent topic: Adjusting the Menu Settings Related references Optional Equipment and Replacement Parts Related tasks Replacing the Lamp Resetting the Lamp Timer Event ID Code List If the Event ID option on the Info menu displays a [...]

Event ID code Cause and solution 0479 A projector system error has occurred. Turn the projector off and then on again. 04FF 0891 Cannot find an access point with the same SSID. Set your computer, access point, and projector to the same SSID. 0892 The WPA/WPA2 authentication type does not match. Make sure the wireless network security settings are c[...]

You cannot reset the following settings using the Reset All option: • Language • Lamp Hours • Memory settings • All settings in the Network menu • Panel Alignment Parent topic: Adjusting the Menu Settings 109[...]

Maintaining and Transporting the Projector Follow the instructions in these sections to maintain your projector and transport it from place to place. Projector Maintenance Transporting the Projector Projector Maintenance Your projector needs little maintenance to keep working at its best. You may need to clean the lens periodically, and clean the a[...]

• To remove stubborn smudges, moisten a soft, lint-free cloth with lens cleaner and gently wipe the lens. Do not spray any liquid directly on the lens. Warning: Do not use a lens cleaner that contains flammable gas. The high heat generated by the projector lamp may cause a fire. Caution: Do not use glass cleaner or any harsh materials to clean th[...]

• To remove stubborn dirt, use a soft cloth moistened with water and mild soap. Do not spray liquid directly on the projector. Caution: Do not use wax, alcohol, benzine, paint thinner, or other chemicals to clean the projector case. These can damage the case. Do not use canned air, or the gases may leave a residue. Parent topic: Projector Mainten[...]

2. Lift the tab on the bottom of the air filter cover and pull down to remove the cover. 3. Pull the air filter out of the projector. 113[...]

4. Tap each side of the air filter 4 to 5 times to shake off any excess dust. Caution: Do not use excessive force when tapping the air filter, or it may crack and become unusable. Do not rinse the air filter in water, or use any detergent or solvent to clean it. Do not use canned air; the gases may leave a residue, or push dust and debris into the [...]

6. Place the air filter back in the projector as shown. 7. Attach the air filter cover as shown, and press it gently until it clicks into place. Parent topic: Air Filter and Vent Maintenance Related tasks Replacing the Air Filter Replacing the Air Filter You need to replace the air filter in the following situations: • After cleaning the air filt[...]

You can replace the air filter while the projector is mounted to the ceiling or placed on a table. 1. Turn off the projector and unplug the power cord. 2. Lift the tab on the bottom of the air filter cover and pull down to remove the cover. 3. Pull the air filter out of the projector. Note: Air filters contain polypropylene. Dispose of used air fil[...]

4. Place the new air filter in the projector as shown. 5. Close the air filter cover. 117[...]

6. Attach the air filter cover as shown, and press it gently until it clicks into place. Parent topic: Air Filter and Vent Maintenance Projector Lamp Maintenance The projector keeps track of the number of hours the lamp is used and displays this information in the projector's menu system. Replace the lamp as soon as possible when the following[...]

Warning: Let the lamp fully cool before replacing it to avoid injury. You can replace the lamp while the projector is mounted to the ceiling, if necessary. 1. Turn off the projector and unplug the power cord. 2. Allow the projector lamp to cool down for at least one hour. 3. Use the screwdriver included with the replacement lamp to loosen the screw[...]

4. Slide the lamp cover out and lift it off. 5. Loosen the screws securing the lamp to the projector. The screws do not come all the way out. 120[...]

6. Lift up the lamp handle and gently pull the lamp out of the projector. Note: The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash. 121[...]

7. Gently insert the new lamp into the projector. If it does not fit easily, make sure it is facing the right way. Caution: Do not touch any glass on the lamp assembly to avoid premature lamp failure. 8. Push in the lamp firmly and tighten the screws to secure it. 122[...]

Caution: Do not over-tighten the screws. 9. Replace the lamp cover and tighten the screw to secure it. Note: Be sure the lamp cover is securely installed or the lamp will not come on. Reset the lamp timer to zero to keep track of the new lamp’s usage. Parent topic: Projector Lamp Maintenance Related tasks Resetting the Lamp Timer Resetting the La[...]

3. Select the Reset menu and press Enter . 4. Select Reset Lamp Hours and press Enter . You see a prompt asking if you want to reset the lamp hours. 5. Select Yes and press Enter . 6. Press Menu or Esc to exit the menus. Parent topic: Projector Lamp Maintenance Replacing the Remote Control Batteries The remote control uses two AA manganese or alkal[...]

1. Open the battery cover as shown. 2. Remove the old batteries. Warning: If the battery fluid has leaked, wipe it away with a soft cloth and avoid getting the fluid on your hands. If it gets on your hands, wash them immediately to avoid injury. 3. Insert the batteries with the + and – ends facing as shown. 125[...]

4. Close the battery cover and press it down until it clicks into place. Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat or flame. Keep batteries out of the reach of children; they are choking hazards and are very dangerous if swallowed. Parent topic: Projector Maintenance Related references Remote[...]

Note: Epson shall not be liable for any damages incurred during transportation. Parent topic: Maintaining and Transporting the Projector 127[...]

Solving Problems Check the solutions in these sections if you have any problems using the projector. Projection Problem Tips Projector Light Status Solving Image or Sound Problems Solving Projector or Remote Control Operation Problems Where to Get Help Projection Problem Tips If the projector is not working properly, try turning it off and unpluggi[...]

Projector Light Status The lights on the projector indicate the projector status and let you know when a problem occurs. Check the status and color of the lights and look for a solution in the table here. 1 Power light 2 Status light 3 Lamp light 4 Temp (temperature) light Power light Status light Lamp light Temp light Status and solution Blue Blue[...]

Power light Status light Lamp light Temp light Status and solution Flashing blue Varies Off Flashing Projector is too hot orange • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects • Clean or replace the air filter • Make sure the environmental temperature is not too hot Off Flashing blue Off Or[...]

Power light Status light Lamp light Temp light Status and solution Flashing blue Varies Flashing Off Replace the lamp soon to avoid orange damage; do not continue using the projector Off Flashing blue Off Flashing A fan or sensor has a problem; turn orange the projector off, unplug it, and contact Epson for help Off Flashing blue Flashing Flashing [...]

Solutions When the Image Contains Noise or Static Solutions When the Image is Fuzzy or Blurry Solutions When the Image Brightness or Colors are Incorrect Solutions When a 3D Image Does Not Display Correctly Solutions When a WirelessHD Source Does Not Display Correctly Solutions to Sound Problems Parent topic: Solving Problems Solutions When No Imag[...]

Solutions When "No Signal " Message Appears If the "No Signal" message appears, try the following solutions: • Press the Source button on the projector repeatedly to cycle through the available sources. Wait a few seconds for an image to appear. • Turn on the connected computer or video source, and press its play button to b[...]

2. Click the Arrangement tab. 3. Select the Mirror Displays checkbox. Parent topic: Solutions When "No Signal" Message Appears Solutions When "Not Supported " Message Appears If the "Not Supported" message appears, try the following solutions: • Make sure the computer's display resolution does not exceed the pro[...]

Related concepts Image Shape Related tasks Adjusting the Image Position Using Lens Shift Solutions When the Image Contains Noise or Static If the projected image seems to contain electronic interference (noise) or static, try the following solutions: • Check the cables connecting your computer or video source to the projector. They should be: •[...]

Note: To avoid condensation on the lens after bringing the projector in from a cold environment, let the projector warm up to room temperature before using it. • Position the projector close enough to the screen. • Adjust the Sharpness setting to improve image quality. • If any bands or overall blurriness remain, display a uniformly patterned[...]

Related concepts Projector Lamp Maintenance Related references Available Color Modes Image Quality Settings - Image Menu Projection Distance Solutions When a 3D Image Does Not Display Correctly If a 3D image does not display correctly, try the following solutions: • Press the 2D/3D button on the remote control to switch to 3D mode, if necessary. [...]

Related tasks Pairing the 3D Glasses with the Projector Charging the 3D Glasses Solutions When a WirelessHD Source Does Not Display Correctly If a WirelessHD source does not display correctly, try the following solutions: • Make sure WirelessHD is selected as the image source on the projector. • Open the WirelessHD reception monitor in the Sett[...]

• Press the A/V Mute button on the remote control to resume video and audio if they were temporarily stopped. • Press the Source button on the projector or a source button on the remote control to switch to the correct input source, if necessary. • Check your computer or video source to make sure the volume is turned up and the audio output i[...]

• The power cord may be defective. Disconnect the cord and contact Epson. • If the projector's lamp shuts off unexpectedly, it may have entered standby mode after a period of inactivity. Press the power button to wake the projector. • If the projector's lamp shuts off, the Status light is flashing blue, and the Temp light is orange,[...]

Related references Remote Control Operation Projector Light Status Optional Equipment and Replacement Parts Where to Get Help Related tasks Replacing the Remote Control Batteries Where to Get Help If you need to contact Epson for technical support services, use the following support options. Internet Support Visit Epson's support website at ep[...]

Purchase Supplies and Accessories You can purchase screens, other optional accessories, and replacement parts from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at epsonstore.com (U.S. sales) or epson.ca (Canadian sales). To purchase a replacement remote control, call (562) [...]

Technical Specifications These sections list the technical specifications of your projector. General Projector Specifications Projector Lamp Specifications Remote Control Specifications Projector Dimension Specifications Projector Electrical Specifications Projector Environmental Specifications Projector Safety and Approvals Specifications Supporte[...]

PowerLite Home Cinema 3500/3510/3600e : High Power Consumption mode: White light output 2500 lumens (ISO 21118 standard) Color light output 2500 lumens Medium Power Consumption mode: White light output 1400 lumens (ISO 21118 standard) ECO Power Consumption mode: White light output 1100 lumens (ISO 21118 standard) Note: Color brightness (color light[...]

Internal sound system Two 10 W speakers (PowerLite Home Cinema 3500/3510/3600e) Noise level 35 dB (High Power Consumption mode) 32 dB (Medium Power Consumption mode) 24 dB (ECO Power Consumption mode) Keystone correction angle ± 30° vertical and horizontal USB Type A port compatibility One USB 1.1 and 2.0 compliant port for USB device input, wire[...]

Parent topic: Technical Specifications Projector Dimension Specifications Height (excluding feet) 6.2 inches (157 mm) Width 16.1 inches (410 mm) Depth 12.0 inches (304 mm) Weight PowerLite Home Cinema 3000 : 14.1 lb (6.4 kg) PowerLite Home Cinema 3500/3510 : 14.8 lb (6.7 kg) PowerLite Home Cinema 3600e : 15.0 lb (6.8 kg) Parent topic: Technical Spe[...]

Power consumption Operating: (100 to 120 V) PowerLite Home Cinema 3000 : Medium Power Consumption mode: 361 W ECO Power Consumption mode: 272 W PowerLite Home Cinema 3500/3510/3600e : Medium Power Consumption mode: 385 W ECO Power Consumption mode: 296 W Standby: 0.29 W (Communication Off), 1.6 W (Communication On) Power consumption Operating: (220[...]

Operating altitude Up to 4921 feet (1500 m) Up to 9843 feet (3000 m) with High Altitude Mode enabled Parent topic: Technical Specifications Projector Safety and Approvals Specifications United States FCC Part 15 Class B UL60950-1 2nd edition (cTUVus Mark) Canada ICES-003 Class B CSA C22.2 No. 60950-1-07 Parent topic: Technical Specifications Suppor[...]

Display format Refresh rate (in Hz) Resolution (in pixels) WXGA 60 1280 × 768 60 1366 × 768 60 1280 × 800 WXGA++ 60 1600 × 900 Composite video TV (NTSC) 60 720 × 480 TV (SECAM) 50 720 × 576 TV (PAL) 50/60 720 × 576 Component video SDTV (480i) 60 720 × 480 SDTV (576i) 50 720 × 576 SDTV (480p) 60 720 × 480 SDTV (576p) 50 720 × 576 HDTV (72[...]

Display format Refresh rate (in Hz) Resolution (in pixels) SDTV (576i/576p) 50 720 × 576 HDTV (720p) 50/60 1280 × 720 HDTV (1080i) 50/60 1920 × 1080 HDTV (1080p) 24/30 1920 × 1080 Wireless HD input signals VGA 60 640 × 480 SDTV (480i/480p) 60 720 × 480 SDTV (576i/576p) 50 720 × 576 HDTV (720p)* 50/60 1280 × 720 HDTV (1080i) 50/60 1920 × 10[...]

Display format Refresh rate (in Hz) Resolution (in pixels) 3D formats HDTV 50/60 1280 × 720 Side by Side (720p) Top and Bottom HDTV (1080i) 50/60 1920 × 1080 Side by Side HDTV (1080p) 50/60 1920 × 1080 — 24 1920 × 1080 Side by Side Top and Bottom * HDMI5 port only Parent topic: Technical Specifications 151[...]

Notices Check these sections for important notices about your projector. Recycling Important Safety Information Important Safety Instructions FCC Compliance Statement Trademarks Open Source Software License Copyright Notice Recycling Epson offers a recycling program for end of life products. Please go to this site for information on how to return y[...]

Important Safety Instructions Follow these safety instructions when setting up and using the projector: • Do not look into the lens when the projector is on. The bright light can damage your eyes. Avoid standing in front of the projector so the bright light does not shine into your eyes. • Do not place the projector on an unstable cart, stand, [...]

• Never allow objects of any kind to enter any openings in the projector. Do not leave objects, especially flammable objects, near the projector. Never spill liquid of any kind into the projector. • If you are using two or more projectors side-by-side, leave at least 2 feet (60 cm) of space between the projectors to allow for proper ventilation[...]

• Do not store the projector outside of the required temperature range of 14 to 140 °F (–10 to 60 °C) or in direct sunlight for long periods of time. Doing so may cause damage to the case. • Do not place anything that can become warped or damaged by heat near the exhaust vents. Do not bring your hands or face close to the vents while projec[...]

3D Safety Instructions Follow these 3D safety instructions when setting up and using the projector: • If you or any viewer experiences the following symptoms or other major discomfort from viewing 3D video images, immediately stop viewing and contact your health care provider: convulsions, eye or muscle twitching, loss of awareness, altered visio[...]

• People who are sleep deprived • People who are physically tired • People under the influence of drugs or alcohol • Anyone who has ever experienced epileptic seizures or sensory disturbances triggered by flashing light effects • SOME LIGHT PATTERNS MAY INDUCE SEIZURES IN PERSONS WITH NO PRIOR HISTORY OF EPILEPSY. • Do not use the devic[...]

medical equipment related to direct medical care, please make your own judgment on this product's suitability after a full evaluation. Parent topic: Important Safety Instructions FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 [...]

Accolade ® and PrivateLine ® are registered trademarks; Duet TM and SizeWise TM are trademarks; and Extra Care SM is a service mark of Epson America, Inc. Mac and OS X are trademarks of Apple Inc., registered in the U.S. and other countries. HDMI and High-Definition Multimedia Interface are the trademarks or registered trademarks of HDMI Licensin[...]

linux-2.6.27 patches udhcp 0.9.8 uvc rev.219 wireless_tools 29 EPSON original drivers Stonestreet One Drivers The GNU General Public License Version 2 is as follows. You also can see the GNU General Public License Version 2 at http://www.gnu.org/licenses/. GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (c) 1989, 1991 Free Software Founda[...]

Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the ori[...]

c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may re[...]

so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even tho[...]

This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographic[...]

END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is [...]

This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Lesser General Public License instead of this License. GNU LGPL This proje[...]

This license, the Lesser General Public License, applies to some specially designated software packages--typically libraries--of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you first think carefully about whether this license or the ordinary General Public License is the better strategy to[...]

We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than the ordinary General Public License. It also provides other free software developers Less of an advantage over competing non-free programs. These disadvantages are the reason we use the ordinary General Public License for [...]

Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library (independent of the use of the Library in a tool for writing[...]

In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given c[...]

Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the Library itself. 6. As an exception to the Sections above, you may also combine or link a "work that[...]

It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute. 7. You may place library facilities that are a work based on the Library side-[...]

It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices. Many people have made generous contributions to[...]

THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH [...]

BSD License (Berkeley Software Distribution License) This projector product includes the open source software program "University of California, Berkeley License (Berkeley Software Distribution License)" which applies the terms and conditions provided by owner of the copyright to the "BSD License". The "BSD License" ar[...]

The "libjpeg" are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. List of libjpeg programs libjpeg-6b License terms of conditions of each program which are provided by owner of the copyright to the "libjpeg" are as follows. Copyright (c) 1994-1997, Thomas G. Lane. [...]

(3) Permission for use of this software is granted only if the user accepts full responsibility for any undesirable consequences; the authors accept NO LIABILITY for damages of any kind. These conditions apply to any software derived from or based on the IJG code, not just to the unmodified library. If you use our work, you ought to acknowledge us.[...]

The "libpng" are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. List of libpng programs libpng-1.2.49 License terms of conditions of each program which are provided by owner of the copyright to the "libpng" are as follows. This copy of the libpng notices is provid[...]

libpng versions 0.89, June 1996, through 0.96, May 1997, are Copyright (c) 1996, 1997 Andreas Dilger Distributed according to the same disclaimer and license as libpng-0.88, with the following individuals added to the list of Contributing Authors: John Bowler Kevin Bracey Sam Bushell Magnus Holmgren Greg Roelofs Tom Tanner libpng versions 0.5, May [...]

A "png_get_copyright" function is available, for convenient use in "about" boxes and the like: printf("%s",png_get_copyright(NULL)); Also, the PNG logo (in PNG format, of course) is supplied in the files "pngbar.png" and "pngbar.jpg" (88x31) and "pngnow.png" (98x31). Libpng is OSI Certifie[...]

jloup@gzip.org Mark Adler madler@alumni.caltech.edu If you use the zlib library in a product, we would appreciate *not* receiving lengthy legal documents to sign. The sources are provided for free but without warranty of any kind. The library has been entirely written by Jean-loup Gailly and Mark Adler; it does not include third-party code. If you [...]

"Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types. "Work" shall mean the work of authorship, whether in Source or Object form, made available under the License[...]

4. Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or without modifications, and in Source or Object form, provided that You meet the following conditions: (a) You must give any other recipients of the Work or Derivative Works a copy of this License; and (b) You must cause any modi[...]

8. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any Contributor be liable to You for damages, including any direct, indirect, special, incidental, or cons[...]

The "aes-src-29-04-09" are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. List of es-src-29-04-09 programs aes-src-29-04-09 License terms of conditions of each program which are provided by owner of the copyright to the "aes- src-29-04-09" are as follows. Copyrigh[...]

(1) Red Hat Incorporated Copyright (c) 1994-2007 Red Hat, Inc. All rights reserved. This copyrighted material is made available to anyone wishing to use, modify, copy, or redistribute it subject to the terms and conditions of the BSD License. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY expressed or impli[...]

Permission to use, copy, modify, and distribute this software for any purpose without fee is hereby granted, provided that this entire notice is included in all copies of any software which is or includes a copy or modification of this software and in all copies of the supporting documentation for such software. THIS SOFTWARE IS BEING PROVIDED &quo[...]

29K Support Products Mail Stop 573 5900 E. Ben White Blvd. Austin, TX 78741 800-292-9263 (5) C.W. Sandmann Copyright (C) 1993 C.W. Sandmann This file may be freely distributed as long as the author's name remains. (6) Eric Backus (C) Copyright 1992 Eric Backus This software may be used freely so long as this copyright notice is left intact. Th[...]

(11) Christopher G. Demetriou Copyright (c) 2001 Christopher G. Demetriou All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the follow[...]

San Jose CA 95134 USA (13) Royal Institute of Technology Copyright (c) 1999 Kungliga Tekniska Hökolan (Royal Institute of Technology, Stockholm, Sweden). All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source co[...]

THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLAR[...]

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. THIS SOFTWARE IS[...]

THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLAR[...]

Redistribution and use in source and binary forms is permitted provided that the above copyright notice and following paragraph are duplicated in all such forms. This file is distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. (23) Intel (i960) Copyright (c) 1993 Intel Corporat[...]

DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT[...]

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,[...]

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, th[...]

Copyright (c) 2001 Daniel Eischen <deischen@FreeBSD.org>. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following discla[...]

OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. (36) - CodeSourcery, Inc. Copyright (c) 2009 CodeSourcery, Inc. All rights reserved. Redist[...]

* * * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * * Neither [...]

of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING[...]

(2) When this software is redistributed in a form in which it can be used in the development of other software, library form, etc., the above copyright display, these terms of utilization, and the following stipulation of no guarantee shall be inserted in documentation accompanying redistribution (user's manual, etc.). (3) When this software i[...]

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. All advertisi[...]

stipulation of no guarantee shall be inserted in documentation accompanying redistribution (user's manual, etc.). (3) When this software is redistributed in a form in which it cannot be used in the development of other software, embedded in devices, etc., following conditions shall be satisfied. (a) The above copyright display, these terms of [...]

Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation. This information is subject to change without notice. A Note Concerning Responsible Use of Copyrighted Ma[...]