Epson MG-850HD manuale d’uso

MegaPlex MG-50/MG-850HD Home Theater Projector User’ s Guide[...]

2 Contents Contents Introduction 5 Projector Parts 6 Optional Accessories 10 Registration and Warranty 10 Using This Manual 11 Setting Up the Projector 12 Choosing a Location 12 Installing the Project or 15 Installing Batteries in the Remote Control 17 Turning the Projector On and Off 17 Turning On the Projec tor 17 Turning Off the Projector 18 Pro[...]

Contents 3 Connecting Other Devices 27 Connecting Video Equipment 27 Connecting Computer Equipment 28 Installing the USB Driver 29 Connecting a Microphone 30 Connecting a USB Storage Device 30 Playing a Slideshow 31 Customizing Slideshow Settings 33 Making Basic Adjustments 34 Positioning the Image 34 Adjusting the Image 36 Resizing the Image 36 Fo[...]

4 Contents Maintenance 58 Cleaning the Lens 58 Cleaning the Projector Case 58 Cleaning and Replacing the Air Filter 59 Replacing the Lamp 61 Resetting the Lamp Usage Timer 63 Checking the Proj ector Status 64 Storing the Projector 64 Transporting the Projector 65 Problem Solving 66 What To Do When the Lights Come On or Flash 66 Solving Picture Prob[...]

Introduction 5 Introduction The MegaPlex MG-50/MG-850HD projector lets you enjoy theater-quality images in the relaxing environment of your own home. Designed especially for home cinema use, it offers these outstanding features: ■ Built-in dock that allows you to d isplay medi a from and charge iPods, iPhones, or iPads ■ Native WXGA 720p (MG- 8[...]

6 Introduction Projector Parts Front Back Control panel Air exhaust vent Lens cover Horizontal keystone slider Adjustable foot Remote control receiver Focus ring Lamp cover Kensington Security slot Light sensor Port cover A/V mute slide Zoom ring (MG-850HD only) AC power inlet Air exhaust vent Remote control receiver Speakers iPod dock Lamp cover P[...]

Projector Parts 7 Bottom Control Panel Mounting bracket attachment points Rear adjustable feet Front adjustable foot Power button Volume Dock light Status lights Power light Source button Light sensor[...]

8 Introduction Projector Ports Side ports Back ports HDMI Component video Microphone Audio (L/R) Composite video USB TypeB USB TypeA (MG-850HD only) PC input[...]

Projector Parts 9 Remote Control Source button Switches between image sources connected to the projector Power button Turns projector on or off Menu navigation buttons Menu button Displays th e projector’s menus Aspect button Changes the picture’s aspect ratio Esc (escape) button Exits the current menu item A/V mute button Temporarily turns pro[...]

10 Introduction Optional Accessories Epson provides the following optional accessories for the projector: Note: When the projector is mounted on the ceiling and the picture i s inverted, the iPod dock will not function. In addition to the accessories listed above, 1-year and 2-year extended service plans are available. You can purchase these plans [...]

Using This Manual 11 Using This Manual This book contains all the information you need to use the projector, in addition to basic setup and maintenance instructions, trou bleshooting tips, and specifications. Please follow these guidelines as you read through the manual: Warning: Must be followed carefully to avoid bodily injury. Caution: Must be o[...]

12 Setting Up the Projector Setting Up the Projector Follow the instructions in this section to ch oose a location for the projector and display an image. Choosing a Location You can install the projector for the viewing setups shown below, as well as front ceiling projection. For more information on projector installation, see page 15. Warning: Do[...]

Choosing a Location 13 Ideally, keep the projector level and place it at a height so its lens is pointing near the bottom or top of the screen, as shown below. The size of the image is determined by the distance from the projector’s lens to the screen. Depending on your display settings and how y ou use the zoom ring, the actual size may differ. [...]

14 Setting Up the Projector 150 in. (381 cm) 171.3 to 205.9 in. (435 to 523 cm) 3.1 in. (8 cm) 200 in. (508 cm) 229.1 to 275.2 in. (582 to 699 cm) 4.3 in. (11 cm) 310 in. (787.4 cm) 335.5 to 426.8 in. (903 to 1084 cm) 6.7 in. (17 cm) 4:3 aspect ratio Diagonal image size Proj ection distance Offset 30 in. (76.2 cm) 37 to 44.5 in. (94 to 113 cm) 1.6 [...]

Installing the Projector 15 Installing the Projector To install the projector, you first need to dete rm ine the location, based on the size of your screen (maximum diagonal image size). Use the tables on page 13 as a guide to pos itioning the projector. To suspend the projector from the ceiling, yo u will need the optional projector mount. See pag[...]

16 Setting Up the Projector 4. Select Fron t/Ceiling . 5. Press the Menu button when done. Note: You can also i nvert the picture by pressing th e A/V mute button for about five seconds. When the projector is mounted on the ceiling , t he left and right speakers are on opposite sides and the stereo output is reversed. To fix the ster eo output, rev[...]

Installing Batteries in the Remote Con trol 17 Installing Batteries in the Remote Control The remote control uses two AAA batteries. Warning: Keep batteries away from children. If a ba ttery is swallowed, contact your doctor immediately. 1. Release the tab and lift open the cover. 2. Insert two new AAA batteries as shown. 3. Insert the tab on th e [...]

18 Setting Up the Projector Turning Off the Projector 1. Turn off any equipment connected to the projec tor. 2. Press the P power button on the remote control or on the projector. Caution: Turn off this product when not in use to prolong the life o f the projector. Continuous 24-hour-a-day use may reduce the overall life of the product. 3. If you n[...]

Projecting F rom an iPo d, iPhone, or iPad 19 Projecting From an iPod, iPhone, or iPad The projector features a dock that allows you to connect an iPod, iPhone, or iPad and charge it while you play back media stored on the device. Note: The term “iPod ” is used in this manual to describe an iPod, iPhone, or iPad unless otherwise noted. Tip: Whe[...]

20 Projecting Fr om an iP od, iPhone, or iPad Connecting an iPad Before you connect an iPad to your projecto r, you can attach the included iPad bracket. Caution: Do not remove the iPad bracket once a ttached. Removing the bracket weakens t he adhesive, making it unable to support the iPad if reattached. 1. Remove any protective case from your iPad[...]

Checking the Dock Light 21 5. Eject the dock by pressing on it until it clicks, then release it. The dock slides out. 6. Connect the iPad by sliding the bottom through the brack et and gently pushing it straight down to connect it to the dock connector. Caution: To prevent damage, do not apply too much pressure when connecting your device. Checking[...]

22 Projecting Fr om an iP od, iPhone, or iPad Tip: If the iPod, iPhone , or iPad battery is low, the Dock light may not turn on. Keep the device connected so it will charge. Once the Do ck light turns on, you can play back content. Note: When you turn off the conn ected device, the Dock light also turns off. Removing Your iPod, iPhone, or iPad 1. T[...]

Device Playback 23 Device Playback Playing Video and Music From Your iPod, iPhone, or iPad Once you’ve connected yo ur device and the Dock light is on, th e following screen is projected: To select videos or music: 1. Press u or d on the remote control to select the type of media you want to play. 2. Press r . One of the following screens will ap[...]

24 Projecting Fr om an iP od, iPhone, or iPad Playing Music When the Proj ector Is in Standby Mode You can play music from the projector speakers without turning on the projector. To play music from your device, turn the projector off and then use your device to select music and control playback. Note: You can use the remote control to control musi[...]

Device Playback 25 Configuring the Screen Saver After a set period of time, the projector may pr oj ect a screen saver while playing music. You can configure the screen saver display and when it will turn on. To configure your screen saver: 1. Select Setting > Screen Saver from the iPod menu. 2. Press r . Select from the following screen saver o[...]

26 Projecting Fr om an iP od, iPhone, or iPad 3. Use the device touch screen or controls to find and play the med ia you wish to project. 4. Press play or start the slideshow on y our device. 5. When finished, press on the remo te control to switch playback control to the rem ote. Playing Music With Photos You can use your iPod to play background m[...]

Connecting Other Devices 27 Connecting Other Devices Connecting Video Equipment You can connect the projector to many type s of video equipment, such as a Blu-ray Disc ™ /DVD player, digit al tuner, cab le or satellit e box, video game console, camcorder, or digital camera. For details on compatible video formats, see page 76. Video port Cable Pr[...]

28 Connecting O ther Devices Connecting Computer Equipment You can connect the projector to a deskto p or laptop PC or Mac OS X system. Video Audio output Use an RCA video cable Use an audio cable Computer port Cable Projector port HDMI Use an HDMI cable DVI Use a DVI to HDMI cable USB (Type A) Use a USB cable The first time you connect a USB cable[...]

Connecting Comp uter Equipment 29 Installing the USB Driver You can send video and audio output to the projector through the computer’s USB port (MG-850HD only) if your computer meets the system requirements (see page 79 ). 1. Turn on your computer. 2. Connect the cable to your projector’s USB TypeB port . 3. Connect the other end to any availa[...]

30 Connecting O ther Devices Connecting a Microphone Audio from a microphone can be output fr om the projector’s speakers. To use the microphone, plug it into the Mic port on the side of the projector. Note: Set Plug-in Power to On when using a microphone or condenser microphone that supports plug-in power. Lowering the value of the Mic Input Le [...]

Connecting a U SB Storage Device 31 A file list appears when you connect your USB storage device to the projector. JPEG files are displayed as thumbnails, while .bmp, .g if and .png files appear as icons. Note: Not all USB Mass Storage Class devices are su pported. Bus-powered hard drives are not recommended. Avoid using a hard drive with multiple [...]

32 Connecting O ther Devices 3. Use the cursor to highligh t Slideshow and press the enter butt on to start projecting. When the last file in a folder or in th e file list has been projected, the slideshow will finis h and the file list will automatically be displayed again. To repeat the slideshow, sele ct Option and set Continuous Play to On . To[...]

Connecting a U SB Storage Device 33 Customizing Slideshow Settings To configure slideshow settings: 1. Click the Option button on the file list. The following screen appears: 2. Use u , d , l , or r on the remote control to move the cursor to the setting that you want to change, and press the enter button. 3. Select OK and press the enter button to[...]

34 Making Basic Adjustments Making Basic Adjustments Follow the instructions in this chapter to make basic adjustments to the image shape, size, color, and quality. For further refinements, see “Making Detailed Adjustments” on page 41. Positioning the Image If you need to raise the projector so that the image is higher on the screen, press the [...]

Positioning t he Image 35 You can place the projector off to the side of the screen if space is limited . If this causes the image to be unevenly rectangular, use the horizont al keystone slider to adjust the image shape. The projector has automatic vertical keystone corre ction, so you don’t need to adjust a raised image.[...]

36 Making Basic Adjustments Adjusting the Image Resizing the Image MG-850HD: You can resize the image using the zoom r ing on the top of the projector. MG-50: You can adjust the Zoom setting by pressing t h e M en u b u tt on on t h e re mo te c o n tr ol and using the u or d button to select the Settings menu. For more information, see page 47. Zo[...]

Selecting the Image Source 37 Focusing the Image You can focus the image using the focus ring. Selecting the Image Source The Source button on the projector and remote co ntrol lets you switch between images from the equipment connected to the projector, such as a Blu-ray Disc™/DVD player, cable or satellite box, or video game console. Press the [...]

38 Making Basic Adjustments If you press the Source button on the projector, you see a list of available sources. Press the u or d buttons on the remote control to move through the list and highlight the desired source. Press the enter button to select it. Note: If an image does not appear, se e “Problem Solving” on page 66. To temporarily turn[...]

Choosing the Color Mode 39 ■ Zoom for images recorded in 16:9 (wide-screen) format. ■ 16:9 for expanding a 4:3 image to 16:9 so it fills the whole screen. This stretches only the right and left sides of the image; the central part is unchanged. If you display a 4:3 image using the Zoom setting, the top and bottom may be cut off. For details on [...]

40 Making Basic Adjustments ■ Presentation (MG-850 HD only) for giving prese ntati ons using color in a bright room. ■ Blackboard (MG-850HD only) allows you to proj ect on a blackboard (green) and maintain a natural-looking tint. Note: The M G-850HD has Home M ode and Business Mode that contain different color mode options. By default, the proj[...]

Making Detailed Adjustments 41 Making Detailed Adjustments You can use the projector’s on-scree n menus to make detailed adjust ments to the image quality—such as the brightness, contrast, sharpness, and color. You can also change the menu display, sleep mode settings, and other projector features. Using the Menu System You can access the menu [...]

42 Making Detailed Adjustments 4. When you’re finished, press the Esc button to return to the previous menu or press the Menu button to exit th e menu system. To display one of the line menus, press the enter butt on. You see a display like this at the bottom of the image: 1. Press the u or d button to select the setting you want to adjust: ■ B[...]

Fine-tuning the Image 43 Fine-tuning the Image You can use the Image menu to adjust the brightne ss, sharpness, color, tint , contrast, and auto iris settings. 1. Press the Menu button on the projector or remote control and select th e Image menu. You see a screen similar to one of these: Note: If you are using the HDMI p ort, you see the m enu on [...]

44 Making Detailed Adjustments ■ Tint Adjusts the balance of green to magenta in the image. ■ Sharpness Adjusts the sharpness of the image. ■ Color Temp. Sets the color temperature of the image. Select High to tint the image blue or Low to tint it red (default setting is Medium ). ■ Color Adjustment Adjusts the color values. Sele ct Red , G[...]

Adjusting Signal Sett ings 45 Adjusting Signal Settings Although the projector normally detects and optimizes the input signal automatic ally, you can use the Signal menu to make manual adjustments. In addition to changing the position of the projected image, you can correct sync for computer images, or change the aspect ratio. 1. Press the Menu bu[...]

46 Making Detailed Adjustments ■ HDMI Video Range When you connect to the HDMI input port, set th e projector’s video range to match the video range setting of your device. Note: The HD MI Video Range setting cannot be set for digital RGB signals. ■ Progressive For composite video, component video, an d certain signals from the HDMI port only[...]

Customizing Projector Features 47 Customizing Projector Features You can use the Settings menu to lock the buttons on the projector, ad just audio volume, and customize several other features. ■ Keystone Adjusts the shape of the image if the projecto r has been tilted upward or downward. If you notice that lines or edges look jagged after adjustm[...]

48 Making Detailed Adjustments ■ Power Consumption Lets you select from two levels of brightness. The ECO setting reduces power consumption and projector noise, and extends the lamp’s operating life. ■ Sound Mode Choose from Standard, Vocal, Music, or Movie to optimize the sound for the content being played. See page 40 for more information. [...]

Customizing Power an d Operation 49 ■ Display Messages: Lets you turn screen messages on or off. Display Background: Sets the screen b ackground to Black , Blue , or Logo when no image signal is available (MG-850HD). Startup Screen: Enables or disables display of the startup (User’s Logo ) screen when the projector is turned on (MG-850HD). A/V [...]

50 Making Detailed Adjustments llumination: Turn off this setting to deactivate the light on the projector’s P power button and the P power light. Use this setting if you find the lights distracting in a darkened room. High Altitude Mode : Enable when you are using the pr ojector above 4,921 feet ( 1 ,500 meters) to ensure that the temperature is[...]

Using the Projector Securit y Features 51 You can also reset the lamp usage timer or restor e all the projector settings to their original values. Follow these steps: 1. Press the Menu button on the remote control. 2. Open the Reset menu. 3. Do one of the following: ■ Select Reset Lamp Hours to clear the lamp usage timer and reset it to zero. You[...]

52 Making Detailed Adjustments ■ Secure the projector to prevent theft using a cable locking sy stem. See page 57 for more information. Creating Your Own Startup Screen On the MG-850HD, you can transfer any image from your computer or video source to the projector and then use it as your startup screen . You can also use it as the screen displaye[...]

Using the Projector Securit y Features 53 6. Use the u , d , l , or r buttons to select a zoom factor (display size) and press the enter button. 7. When the mess age Save this image as the Use r’s Logo? appears, select Yes and press the enter button. Saving the logo may take a few moments. Do not use your projector, remote control, or video sourc[...]

54 Making Detailed Adjustments ■ Control Pa nel Lock to disabl e all the buttons on the projector’s control panel. A message appears on the screen whenever you press a button with Control Panel Lock turned on. To operate the projector, you must use the remot e control. 4. Press Menu to exit the menu system. If you turned on the Control Pane l L[...]

Using the Projector Securit y Features 55 To change your password: 1. Use the remote control to select Password and press the enter button. Note: The d efault password is “ 0000”. 2. A confirmation screen will ask you if you want change the password. Select Yes . Note: Once you select Yes , you must enter a password. Th e password can be the sa[...]

56 Making Detailed Adjustments iPod Management You can register up to 10 iPods with your projector. A registered iPod can act like a password when iPod Protection is enab led. To register your iPod: 1. Connect y our iPod to the projector. 2. Press the Aspect button on the remote control and hold it for about 5 seconds to access the Password Protec [...]

Using the Projector Securit y Features 57 Note: You must delete the existing text in the Use r Name field before adding a new user name. Using Security Locking The projector includes two security locking points to prevent theft. ■ Security cable . You can attach a commercially available security cable as shown below to secure the projector to a t[...]

58 Maintenance Maintenance Your projector needs little maintenance. All you ne ed to do on a r egular basis is keep the lens clean. You also may need to clean the air filte r to prevent overheating. Warning: Before you clean any part of the projector, turn it off, unplug the power cord and let it cool down. Never open any cover on the projector, ex[...]

Cleaning and Replac ing the Air Filter 59 Cleaning and Replacing the Air Filter Your projector includes an air filter to ensure th e best performance. If dust collects on the air filter, clean it as described below. Dust clogs prevent proper ventilation and cause overheating and damage to the projector. 1. Press the P power button and wait for the [...]

60 Maintenance 7. Use a small vacuum cleaner that is designed for computers and other office equipment to remove any dust from the surface of the filt er. If you don’t have one, ge ntly clean the filter using a very soft brush (such as a clean artist’s paintbrush). If the dirt is difficult to remove or the filt er is broken, replace it. You can[...]

Replacing the Lamp 61 Replacing the Lamp The projection lamp lasts for up to 4000 hours (in Normal mode) or 5000 hours (in ECO mode). You can use the Info menu to check how long it’s been in use (see page 64). It’s time to replace the lamp when: ■ The following message appears: “It is time to rep lace your lamp. Please contact your Epson pr[...]

62 Maintenance 5. Use a screwdriver to loosen the lamp cover. Slide the cover away from the projector to remove it. 6. Loosen the two screws secu ring the lamp. Note: The screws don’t come all the way out. 7. Grasp the lamp by the h andle and pull it straight out. Warning: The lamp(s) in this product contain mercury. Please consult your state and[...]

Replacing the Lamp 63 9. Replace the lamp cover and tigh ten the scre w. (The projector won’t work if the lamp cover is open or loose.) 10. Reset the lamp usage timer, as describe d below. Resetting the Lamp Usage Timer After replacing the lamp, plug the projector back in and press the P power button. Then follow these steps to reset the lamp usa[...]

64 Maintenance Checking the Projector Status You can use the Info menu to view information about the current display and how long the projection lamp has been in use. To access the Info menu: 1. Press the Menu button on the remote control. 2. Use the menu navigation buttons to open the Info menu. The following information appears: Note: The informa[...]

Transporting the Projector 65 Transporting the Projector Note: Epso n shall not be liable for any damages incurred during transportation. The projector contains many glass and precis ion parts. When shipping the projector for repairs, use the original packaging material if possible. If you do not have the original packaging, use equivalent material[...]

66 Problem Sol ving Problem Solving This section explains how to interpret the proj ector’s lights, solve problems with the picture and remote control, and contact technical support. What To Do When the Lights Come On or Flash The lights on top of the projector indicate the projector’s status and let you know when a problem occurs. If the proje[...]

What To Do When th e Lights Come On or Flash 67 Power button and power light are on. Projection is in progress. Lights indicating a problem Light state Cause and solution All lights are off. The projector is not receiving power. Make sure the powe r cord is connected securely at both ends. Also check to see if the Illumination setting is to Off . S[...]

68 Problem Sol ving Note: If the power button doesn’t light up, it may have been turned o ff using the Illumination setting (see page 50). Solving Picture Problems You cannot turn on the projector. ■ Make sure the power cord is connected. Then wait a moment for the P power light to come on befo re pressing the P power button. ■ If you’ve se[...]

Solving Picture Problems 69 ■ Press the A/V mute button on the remote control to make sure the picture hasn’t been turned off temporarily. ■ Check that the P power light and button are on, that no status lights are flashing, and the lens cover is open. ■ The projector may be in standby (or sleep) mode. If the P power button is on and the P [...]

70 Problem Sol ving The picture is upside-down or reversed. Change the Projection setting in the Exte nded menu (see page 49). Note: You can not change projection m ode when an iPod is in the dock. The picture isn’t rectangular. ■ If the image looks like or , the projector has been placed off to one side of the screen and angled toward it. Use [...]

Solving Remote Con trol Proble ms 71 The colors on the screen don’t look right. ■ Press the Color Mode button on the remote control to se lect a different color mode (see page 39). ■ Check the brightnes s and contrast (see page 43). ■ Fine-tune the colors with the settings listed on page 44. ■ If the picture looks dark, you may need to re[...]

72 Problem Sol ving ■ Dim the room lights and turn off any fluorescent lights. Make sure the projecto r is not in direct sunlight. ■ Turn off nearby equipment that emits infrar ed energy, such as a radiant room heater. ■ Make sure there are no objects between th e remote control and the remote control receiver. Where to Get Help Internet Supp[...]

74 Specificati ons Specifications General Type of display Poly-silicon TFT active matrix Size of LCD panels MG-850HD: 0.59 inch (15 mm) wide MG-50: 0. 54 inch (14 mm) wi de Lens MG-850HD: F=1.58–1.72 Focal length 16.9 mm–20.28 mm MG-50: F=1.44 (No optical zoom) Focal length 16.70 mm Resolution (native format) MG-850HD: WXGA 1280 × 800 pixels M[...]

Specifications 75 Lamp Note: Lamp life will vary depending on mode selected, envi ronmental conditions, and usage. Brightness decreases over time. Turn off this pro duct when not in use to prolong the life of the projector. Type UHE (Ultra High Effici ency), E-TORL Power consumption 200 W Lamp life Normal mode, 4000 hours ECO mode, 5000 hours Part [...]

76 Specificati ons MG-50: Normal mode: 313 W/ECO mode: 260 W Standby (charging): 34 - 55 W (depending on volume) Standby (not charging; device battery full): 14 W Environmental Temperature Operating: 41 to 95 °F (5 to 35 °C) Storage: 14 to 140 °F (–10 to 60 °C) Humidity Operating: 20 to 80% RH, n on-condensing Storage: 10 to 90% RH, non-conde[...]

Specifications 77 Composite video Component video Format Refresh rate (Hz) Resolution NTSC 60 720 × 480 PAL 5 0/60 720 × 576 SECAM 50 720 × 576 Format/ Signal Refresh rate (Hz) Resolution SDTV 480i 576i 480p 576p 60 50 60 50 720 × 480 720 × 576 720 × 480 720 × 576 HDTV 720p 1080i 50/60 50/60 1280 × 720 1920 × 1080[...]

78 Specificati ons Analog RGB (computer display) *Only compatible when the resolution is set to wide. HDMI Signal MG-850HD Refresh rate (Hz) MG-50 Refresh rate (Hz) Resolution VGA 60/72/75/85 60/72/75/85 640 × 480 SVGA 56/60/72/ 75/85 56/60/72/ 75/85 800 × 600 XGA 60/70/75/85 60/70/75/85 1024 × 768 SXGA 70/75/85 60/75/85 60/75/85 70/75 60 60 115[...]

Specifications 79 *MG-850HD only. System Requirements The following system requirem ents need to be met in order for USB display to work (MG-850HD only). Windows UXGA 60 1600 × 1200* SDTV 480i 576i 480p 576p 60 50 60 50 720 × 480 720 × 576 720 × 480 720 × 576 HDTV 720p 1080i 1080p 50/60 50/60 24/30/50/60 1280 × 720 1920 × 1080 1920 × 1080 O[...]

80 Specificati ons Mac OS Mac OS X 10.5.x, Mac OS X 10.6.x, Mac OS X 10.7.x CPU Power PC G4 1 GHz or faste r Memory 512 MB or more Hard Disk Free Space 20 MB or more Display Minimum resolution: 640 × 480 Maximum resolution: 1680 × 1200 Display color in 16-bit color or greater.[...]

Notices 81 Notices Important Safety Information Follow these safety instructions when setting up and using the projector: ■ Never look into the projector lens when the lamp is tu rned on; th e bright light can damage your eyes. Never let children look into the lens when it is on. ■ Never open any cover on the projecto r, except the lamp and fil[...]

82 Notices ■ Do not place anything that can become warped or da maged by heat near the exhaust vents. Do not bring your hands or face close to the vents while projection is in progress. ■ Do not block the light coming out of the projector’s lens with an object. This can cause the object to melt or start a fire. ■ Unplug the projector during[...]

Notices 83 WARNING The connection of a non-shielded eq uipment interface cable to this equipment will inva lidate the FCC Certification of this device and may cause interference le vels which exceed the limits established by the FCC for this equipment. It is the resp onsibility of the user to ob tain and use a shield ed equipment interface cable wi[...]

84 Notices Trademarks EPSON and MegaPlex are regi stered trademarks and E PSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PrivateLine is a registered trademark and Extra Care is a servi ce mark of Epson America, Inc. HDMI, the HDMI logo, and High-Definition Multi media Interface are re gistered trademarks of HDMI Licens[...]