Epson SEPG04002 manuale d’uso

EPSON AcuLaser C1100 A4 Full Color Laser Printer SERVICE MANUAL SEPG04002[...]

Notice:  All rig hts reser ved. No part of th is manual may be reprodu ced, st ored in a r etrieva l system, o r transmi tted in a ny form or by a ny means, elect ronic , mechanica l, photoco pying, reco rding, or otherwi se, without the pr ior writ ten permis sion o f SEIKO EPSON CORPORATION.  The co ntents of this manual are s ubjec t to ch[...]

PRECAUTIONS Precaut ionary not atio ns througho ut the text are categ orized re lati ve to 1)Pe rsonal in jury a nd 2) dama ge to equi pment. DANGER Signals a prec aution whic h, if igno red, co uld res ult in s erious or fatal personal inju ry. Great c autio n should be exerci sed in p erf ormi ng procedur es preced ed by DANGER Headi ngs. WARNING[...]

About This Manual This manual descr ibes basic functio ns, theory of electrical and m echa nical operations, main tenance and repair p rocedures of the printer. The instructions and procedures included herein are intend ed for the exper ienced re pair tech nicians, and attention sho uld be giv en to the pr ecautions on the precedin g p ag e. Manual[...]

Abbreviations The follo wing is a rep resentat ive example of abbreviat ions (bot h origin al and commo n ones) us ed in thi s manual. ADC ............. .. Automatic Density Contro l AG ... ................. ............ .... Analog Ground APS .............. ........... ...... Auto Paper Select ARC ............. .... Auto Registratio n Control ASSY[...]

Safety Information To prevent accid ents during a m aintenance procedur e, strictly ob se rve the Warnings and Cautions and never depar t from the in str uctions given in this do cument. Do not d o anything that is dan gerous even if not specifically described i n this manual . In addition to the descriptions below and those given in this manu al, [...]

High T em peratu re As sembly When working with hot parts (FUSER etc.) mak e sure to turn the power off, un plug the power cable, and leave the printer until it cools down sufficiently to work with to prevent bur n inju ry. W ARNI NG As the inside of the printer is high-temperature s tate immediately after the operation, lea ve it mo re than 30 min[...]

Lase r Beam W ARNI NG  Letting a laser beam get into your eye directly could res ult in loss of visi on.  Never open the Cover where the Warning Label About Laser Beam is affix ed.  Before disassembling or assembling, be sure to turn the power off.  If you need to work on the prin ter with power applied, strictly follow the instructions[...]

W arning/C aution Labels Warning labels and caution labels are attached on the corr espond ing locatio ns on or in the printer .  Caution Label About H igh-tempera ture Surface The labels are attached on the Fuser assy and the perimeter alerting the u ser to avoid b urn injur y. (Refer to “High Temperature Assembly” )  Warning label for L[...]

Cautions relat ing to T one r cleaning  To prevent ignition, ex plosion, burn, injury, etc., d o not use a g eneral vacuum cleaner for cleaning dropped ton er. (To d o so may caus e the toner to catch fire by sparks in the v acuum cleaner.) Cautions relati ng to S tor age of Paper To achieve the app ropriate printing r esults, unused p aper that[...]

Safety Devices Use extra care when checking or servicing the safety devices (e.g., interlock switches, fuses, thermost at). The printer's cov er, control panel an d any othe r parts which are directly related to the u ser's safety should also be observed carefully. As the major safety devices, the printer is equipped with the follo win g [...]

Schematic Diagr am of Safety System Leg_Sec001_025EA[...]

Revision S tatus Revision Date o f Issue Descript ion A 28 Sep tember , 200 4 First release B 1 3 J U L Y , 20 0 5 <Mo d i f i ca t i o n> Chapter 1: • Tabl e 1-2 C olor m ode (U nit : se cond s or les s) (p. 23) / Modification • Supporte d paper s ize, type and orientat ion (p. 25) / Modification • NOISE (p.29) / Modification • Calib[...]

EPSON AcuLaser C110 0 Rev is io n B 14 Contents Chapter 1 PRODUC T DESCRIPTION 1.1 Overview .......... ........... ................. ............ ........... ................. ........... ........... ......... 20 1.1.1 Engine featu res .................... ............ ........... ................. ........... ........... ......... 20 1.1.2 Co ntro[...]

EPSON AcuLaser C110 0 Rev is io n B 15 1.16.4 W arning Messages an d Troublesho oting................... ........... ........... ......... 62 1.16.5 Serv ice Call Error Mess ages ..................... ........... ................. ........... ......... 63 1.17 Expanding the R AM ................... ............ ................ ............ .......[...]

EPSON AcuLaser C110 0 Rev is io n B 16 3.6.2 Printing Procedu re of Test Pr int Pattern ...................... ........... ................. . 274 Chapter 4 DISASSEMBLY AND ASSEMBLY 4.1 Overview .......... ........... ................. ............ ........... ................. ........... ........... ....... 277 4.1.1 Precaution s ................[...]

EPSON AcuLaser C110 0 Rev is io n B 17 4.6.8 LATCH ASSY AD ......... ................. ........... ........... ................. ........... ....... 372 4.6.9 BCR CLN XERO ASSY ........... ........... ................. ........... ............ ............ 373 4.6.10 SENSOR TNER FULL...... ................. ........... ............ ................[...]

EPSON AcuLaser C110 0 Rev is io n B 18 4.13.14 MOTOR ASSY FEEDER...... ................. ........... ........... ............ ............ 460 4.13.15 CLUTC H ASSY FEED ......... ................. ........... ........... ................. ....... 461 4.13.16 HARNESS-ASSY FEED 1 .......... ..... ........... ...... ........... ...... ........... ....[...]

CHAPTER 1 PRODUCT DESCRIPTION[...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Overview 20 1.1 Overview This printer is a conven tional 4-cycle color p age printer that takes advantage of laser and electropho tographic technologi es. 1.1.1 Engi ne features  New compact an d light en gine, whi ch enables 600 dpi 445 (W) x 445 ( D) x 439 (H) mm, 25 kg  Print speed (w[...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Basic Spe cifications 21 1.2 Basic Spe cifications 1.2.1 Process Spe cificati ons & System  Printing method : Semiconductor laser beam scanning and dry electropho tographic p rocess with two ing redients  Light source : Semiconductor laser  Photocon ductor : Organi c photoco nduct[...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Basic Spe cifications 22 PRINTING MO DE BY PAPER TYPE Table 1-1. Printing mode by pa per t ype Paper type Prin ting spee d mo de F/C B/W Plain p aper 64 to 80g/m 2 (RX-8 0/4024) Standa rd Standard Plain p aper (Bac k) For re verse side of paper when feed ing manu ally to print on both sid es. [...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Basic Spe cifications 23 FIRST PRIN T TIME The time from r eceiving the Start command to when trailing edg e of the paper leav es the paper eject roller. Note that the time given in th e tables below does not apply when the printer is in the conditions descri bed in “1.11 En gine Rest rictio[...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Basic Spe cifications 24 PAPER FEED REFERENCE Reference po sition to feed paper (in any size) is always center of the feede rs. PAPER FEED Note *1 : Refer to “1.3 Paper Specifications ” (p30) . *2 : Environ m enta l cond itio n for the capac ity : 22 ºC/55 % RH. COMBINATI ON WITH OPT IONA[...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Basic Spe cifications 25 SUPPORTED PAPER SIZE, TY PE AND ORIE NTATION Note *1 : Pape r su ppo rted on ly by contr oller f irmw are (ha ndled as us er de fined size by the vide o I/F) *2 : For the ori entatio n of en velope s, r efer to “Envelope orie ntation ” (p. 26) . *3 : Be su r e to s[...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Basic Spe cifications 26  Envelope orientation NOTE 1: Set envelo pe s with its print su rface faci ng up 2: Image qual ity and feed is not guarant eed when printing on the b ack side (flap side) of enve lopes. Note *1 : Enve l opes with a dh esive or tap e are not avai l able. *2 : Be sure[...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Basic Spe cifications 27  Dimensions and weight wit h options installed NOTE 1: Manufacturin g tolerance is ± 5 mm in dimens ions and ± 0.5 kg in weight . 2: Consumables are not includ ed in the main unit weig ht (incl uding co ntroller). Figure 1-2. Dim e nsi ons (Including O ptions) - 1[...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Basic Spe cifications 28 CONSUMABLE S AND PE RIODIC REPLACEM ENT UNIT NOTE: For detailed specificatio ns, refer to “1.9 Co nsumables /Periodi c replacemen t unit ” (p38) . POWER SUPPLY  Power suppl y oper a tin g volt age/ freq uenc y  AC 120 V ± 10% 50 Hz /60 Hz ± 3 Hz  AC 220 [...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Basic Spe cifications 29 NOISE  Sound pres su re NOTE 1: The metho d of measur ing a nd ca lculatio n con forms to IS O-77 79. 2: Values ment i oned above are ac tual measurem ent value.  Sound power NOTE 1: The metho d of measur ing a nd ca lculatio n con forms to IS O-77 79. 2: Values [...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Paper Speci ficati ons 30 1.3 Paper Specifications 1.3.1 Paper T ype  Standa rd paper  Monochrome: RX-80 paper (monoch rome), 4024 paper (20 l b)  Color: EPSON Colo r Laser Paper  Plain p aper  64 g/ m 2 to 105 g /m 2 (Commonly used copy paper, recy cled paper, high quality plai[...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Paper Speci ficati ons 31 1.3.3 Avail able Paper by Feeder Note : { : Paper feed an d image quali ty is guaranteed.  : Paper fe ed and pri nting is possible. However, th is is limit ed to type s of paper for gene ral applicatio ns. Image quality is n ot guarantee d. X : Feed is not possi bl[...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Reliabil ity and Ser viceabil ity 32 1.4 Reliability a nd Serviceability 1.4.1 Reliability MECHANICAL L IFE TI ME  Main unit:  Color:Mo nochrome = 2:1 : 200, 000 page s or 5 years , whichever comes firs t.  Color onl y : 150, 000 pages o r 5 years, whichever comes firs t.  Monochro[...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Reliabil ity and Ser viceabil ity 33 SKEW HEIGHT OF CURL OF OUTPUT PAPER NOTE 1: Th e same for simpl ex and duplex printing 1.4.2 D urability PRINT VOLUME (PAGES/MONTH)  Average : 3, 00 0 pages/m onth  Maximum : 30, 0 00 pages/ month 1.4.3 Serviceability MEAN TIME TO REPAIR  MTTR : Wi[...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Service Co nditions 34 1.5 Service Conditions 1.5.1 Ambient Temperature and Humidit y 1.5.2 Air Pressure (Altitude) 65 to 101kPa (0 to 3, 100 m or le ss) 1.5.3 Levelness Difference b etween fr ont and back: 5mm or l ess (at 445mm ) Difference between left and right: 10mm or less (at 445mm) 1.5[...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Conditio ns for Stor age and Tr ansport 35 1.6 Conditions for St orage and Transport 1.6.1 Ambient Temperature and Humidit y Note *1 : N on-conde nsing 1.6.2 Storage Altitude 0 to 3, 1 00 m or less For ai r t rans port, 0 to 15, 000 m. Howe ve r, this as sumes that t he cargo compar tment is m[...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Electric al Characte ristics 36 1.7 Elect rical Characteristics NOTE: The following sections do not incl ude any optional units. 1.7.1 Electrical Fast Transient /Bursts (AC Line Noise) Ensure t he followi ng condi tions usi ng evaluati on metho ds complian t with IEC 61000- 4-4.  1 kV : No [...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Compatibl e Specificatio n 37 1.8 Compatible Specif i cat ion 1.8.1 Safety Standard 1.8.2 Safety Standard (Laser Transmi ssion) NOTE: <Reference> Laser sp ecifica tions Wavelength ( shortes t to longes t) : 770 to 7 90nm Maxim u m aver age ra diant po wer : 5 mW 1.8.3 EMI Standards 1.8.4[...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Consumables/Pe riodic re placement un it 38 1.9 Consumables/Periodic replacement unit 1.9.1 Specificatio ns Note *1 : Appro ximate numb er of p rinted pages using A4 con tinuous prin ting at 5% im age occupa tio n rate. The cartridge li fetime varies acco rding to the paper si ze an d type of [...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Consumables/Pe riodic re placement un it 39 1.9.2 Condi tions for Storage and Transport  Temperature and humidity conditions Note *1 : N on-conde nsing Note : Storage time afte r opening is 12 mont hs in the n ormal oper ating en vironmen t.  Storage altitude 65 to 101 kPa (0 to 3, 100 m[...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION External Appearance a nd Unit Names 40 1.10 External Appearance and Unit Na mes 1.10.1 Unit names Figure 1-8. U nit name_1 Figure 1-9. Un it name_2 Table 1- 30. Li st of u nit na mes No. Name No. Name No. Name No . Name 1 Cover B 8 MP tray 15 Cleane r cove r 23 Cover DM (Duplex un it) 2 Contro[...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION External Appearance a nd Unit Names 41 Figur e 1-10 . Unit na me_3 Figur e 1-11 . Unit na me_4 Figu re 1-12 . Unit na me_5 16 17 18 19 20 22 4 5 1 26 27 2 24 23 15 25[...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Engine Restric tions 42 1.11 Engine Restrictions FACTORS LIMITIN G PRINTI NG SPEED  Image quality adjustment Note *1 : Condition to print 50 copies (p ages) contin uously: l The average of the pri n t ratio should be 60 % o r less for each color. *2 : ADC = Automatic De nsity Con trol: A co[...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Engine Restric tions 43 FACTORS LIMITIN G PRINTI NG START Note *1 : When th e operati on p erforme d during the warm-up , the warm-up ti me becomes 74 seconds. *2 : The war m-up ti m e i s includ ed . (After the cover is o pened and closed, the normal warm-up ope ration is execute d.) TONER DU[...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Notes When Replacing Cons umables a nd Install ing Optiona l Products 44 1.12 Notes Wh en Replacin g Consumables and Installing Optional Products 1.12.1 Consuma bles  Toner Cartridge The power supply of the main uni t should b e on. If the main unit is turned o ff, th e cartridge that needs[...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Life detail s 45 1.13 Life d etails  Monochrome mod e Note : B:Monochr ome C:Colo r Note *1 : 1. The life of a Photocond uctor Unit may n ot reach the abo ve numerical value ac cording to an op erating cond ition. It bec omes a li fe end by full of the waste toner. (Because w aste tone r bo[...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Controller Sp ecificat ions 46 1.14 Con troller Specific ations 1.14.1 Controll er Basic Specifications  CPU : VR430 5 (66.7 MHz)  Enhanced techn ology : CPGI, CRIT, RITech (the ASIC us es HTC)  RAM : SDRAM  Standa rd : 32 MB (mount ed on the cod e ROM DIMM si de)  Expansion : 1[...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Controller Sp ecificat ions 47 1.14.3 Ex ternal Interface Specifications The printer pr ovides the following ho st interfaces.  Parallel (IEEE1284 compliant) interface : Standard  USB (Rev.2.0 HS) interface : Standard  Network interface : Standard or Optio n The locations of the respe[...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Control Panel 48 1.15 Control P anel 1.15.1 Ex ternal Appearance a nd Names Figure 1-14. Exte rnal View of Control Panel Table 1-36 . Indi cators Indicato rs Functi on LCD 1 line x 20 cha rac ters (5 x 7 dot mat rix ) Ready LED O n : P rint er is r e ady to prin t. Off : P r i nter is no t rea[...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Control Panel 49 1.15.2 Panel Settings List The printer settings are listed below. Underlined value in the Setting value column are factory default sett ings. Informa tion Menu Note *1 : Only displaye d when the netwo rk interface b oard is installed, a nd “Network Menu” - “Network I/F=O[...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Control Panel 50 Setup Menu Note *1 : This item exists a s the para meter, but n ot di splayed on the pane l. *2 : Able to set with EJL, MIB Reset Menu PARALLEL M EN U Note *1 : After this item is changed , the setting va lue takes effect afte r a warm boot or af ter the power is tu rned on ag[...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Control Panel 51 USB Menu Note *1 : After this item is changed , the setting value takes effect after a warm bo ot or after the power is turned o n again. While it is reflect ed in the Status Sh eet and EJL read-bac k, the actual change t akes effect after a warm boot or after the powe r is tu[...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Control Panel 52 PRI N T E R AD JU ST MEN U Note *1 : Display ed o nly when the Sup po rt Mode has been selected by a sp eci al operation when the power is turned on. After changing the setting s in the Printer Adjust Menu and pressing the Enter button, the printer reboots. *2 : Displ ayed onl[...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Control Panel 53 USER SETTING IT EMS OTHER THAN IN THE SETTI NG ME NU The following is a list of user settings not included in the Setup menu . Initialization by the Initialization menu of the Panel does not clear these item s. Item Setting value Default Setting Method PrinterNam e 32-byte ch [...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Control Panel 54 1.15.3 Ex planation of Menu and Settings The following are items specific to this printer. Reset menu  Chan ge Tone r C/Ch ange T oner M /Chan ge Tone r Y/C hange T oner K Used when rep lacing a Toner Cartridge befor e toner end occur s. When executed, “Please Wait” is [...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Control Panel 55 1.15.4 Specia l Operations LIST OF OPERATING FUNCTIONS The following is a list of the special operating functions sup por ted by this prin ter. Do not m ake these funct ions (except Suppor t mode and panel sett ing value initialization) available to users. SPECIAL FUNCTI ONS T[...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Printer St atus 56 1.16 Printer Stat us 1.16.1 Li st of Printer Mess ages The following is a list of messages displayed by the printer. Table 1-39. L ist of Pr inter Messages Dis pla y Sort Error LED status Status cod e (Displays when turn on the power) Status --- --- Service Req Cffff Service[...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Printer St atus 57 Note *1 : W W W W W=C, D, E, F , G, DM, MP, LC *2 : Can cel Print Jo b and C ancel All P rint Job using th e ope ration pa nel. *3 : Cancel Print Job u sing the host. *4 : For de tailed information on respondi ng to c omposite erro rs, refer to th e print status area. *5 : F[...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Printer St atus 58 1.16.3 Error Mess ages and Troubleshooting The following are items specific to this printer. Check Transparency  Explanation A paper jam has occurred because media ot her than transparencies was fed when transparency is specified, o r transparen cy was f ed when other tha[...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Printer St atus 59 NonGenuine To ner uuuu  Explanation A non- genuine Toner C artridg e is instal led.  Remed y  Open cover A, install the right Toner Cartridge. The printer reco vers from th e error when the co ver is closed.  Press the Start/Stop button. The message will chang e [...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Printer St atus 60 Manual Feed ssss  Explanation Manual feed mode is specified for the cu rrent print job. During p rinting i n the manual feed mode, t he paper ran ou t.  Remed y  Press the Start/ Sto p button. Print ing starts feeding paper from the higher priority feeder.  Cance[...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Printer St atus 61 Invalid N/W Module  Explanation The networ k progr am does not exist, o r a network program that is not fo r this printer is written. The interfaces m aintain the status befo re the error. Replace Phot ocondctr  Explanation Photoconductor Unit has reached the end of it[...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Printer St atus 62 1.16.4 Warni ng Messages a nd Troubleshooting The following are items specific to this printer. Worn Fuser  Explanation The FUSER ASSY comes to near end of its life. The print quality is not guaranteed from now on.  Remed y 1. Tur n off the power and replace the fuse r[...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Printer St atus 63 1.16.5 Servi ce Call Error Messages This section shows the service call error message of this printer. (For details, refer to Chapter3 “TROU BLESHOOTING” .) ENGINE -RELA TED SE RVICE CA LL ER RORS CONTROLLER-RELAT ED SERVICE CALL ERR ORS Table 1-40. List of Service Call [...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Printer St atus 64 1021 RAM error (slot 1) 1120 ROM checksum erro r (bit 0 to 7 ) (program) 1121 ROM checksum erro r (bit 8 to 1 5) (program) 1122 ROM checksum erro r (bit 16 to 23 ) (program) 1123 ROM checksum erro r (bit 24 to 31 ) (program) 1200 EEPROM wr itin g error 1210 EEPROM writing t [...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Expanding the RAM 65 1.17 Expanding t he RAM When the memory is insufficient, the printer displays the foll owing error messages.  Mem Overflow  Duple x Me m Overf low  Image Optimum The following meth ods can be u sed to clear the errors . To ensure a stable operation, a dd more memo[...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Handling Prec autions 66 1.18 Handling P recautions 1.18.1 Precauti ons When Turning O ff the Power This printer includes internal, nonvolatile memory (EEPROM), which stores setting values important to operate the printer normally. If the power is cut off during writing to the nonvolatile memo[...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Status Shee t 67 1.19 Status Sh eet There are two kinds of status sheet, the Status Sheet (Simplified versio n) and the Status Sheet.  Status Sheet (Si mplified version) : This can be p rinted us ing the prin ter operat ion panel. An d also a St atus Sheet on which has no setting informatio[...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Status Shee t 68 HARDWARE EN VIRONM ENT EXCEPT FOR OPTION 1. Serial No . : Serial number of the unit 2. Firm ware Revis ion : 211XX is indic ated. CONSUMABLE INFORM ATION AND PART NUMB ER NOTE: The first one is the part number of 1.5K, and the latter one is that of 4K. Figure 1-15. Status Shee[...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Status Shee t 69 Figure 1-16. Status Sheet (F ull version) Information  Part Numbers T oner Cartridge Cyan Needed Soon E ■■■■■■ F0193/0189 T oner Cartridge Magenta Needed Soon E ■■■■■■ F0192/0188 T oner Cartridge Y ellow Needed Soon?[...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Engine St atus Sheet 70 1.20 En gine Status Sheet It can be output fro m the Mainte nance Menu. Fo r details , refer to Chapter6 “MAINTENANCE” for the Engine Status Sheet. C A U T I O N Do not disclose this inform atio n to the user.[...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Recommended Oper ating Envir onment (Host PC) 71 1.21 Recommended Operating Environment (Host PC )  Minimum req uirement s for Wi ndows  OS : Wi ndow s ® 95/98/Me/20 00/XP, Win dows NT ® 4.0  CPU : Pen tium ® I I 233 MHz or more (450 MHz or more reco mmended)  RAM : 64 MB or mor[...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Paper Handli ng Algorith m 72 1.22 Paper Handling Algorithm The relati onship betw een paper type, type and s ize is shown b elow . Note *1 : MON, C10, DL, C5, C6, IB5 Table 1-42. Engine control, CM Page S ize PaperType EJL PAPER FACE Pape r Source Paper ty pe (set by driver) MP or L C1 Type* [...]

EPSON AcuLaser C110 0 Rev is io n B PRODUCT DESCRIPTION Paper Handli ng Algorith m 73 Note *1 : Paper Type in Sele ct ype for each paper feed er PAPER SOURCE Note : For paper size ot h er than the above, t he pa per feeder is determ in ed ac cording to the prescr ibed algo rithm based on the Pape r Source, pa per type set by the pr inter driver, an[...]

CHAPTER 2 OPERATING P RINCIPLES[...]

EPSON AcuLaser C110 0 Revision B OPERATING PRINCIPLES Print Proces s 75 2.1 Pr int Pro cess 2.1.1 Print Process Overvi ew This printer is a “full color laser printer” th at uses the pr inciple of electrophoto graphic recordin g. The pri nter contains a drum th at forms to ner images by fou r colors of toner “Yellow, Mage nta, Cyan and Black ([...]

EPSON AcuLaser C110 0 Revision B OPERATING PRINCIPLES Print Proces s 76 2.1.2 Print Process Diagra m The diagram below illustrates the entire print pr ocess. Figure 2-2. Total Print Process Schematic Diagram Leg_Sec06_002EB[...]

EPSON AcuLaser C110 0 Revision B OPERATING PRINCIPLES Print Proces s 77 2.1.3 T echnical Expl anation of Print Pro cess 2.1.3.1 Charging At the “Charging” pro cess, BCR (Bias C harge Roll) applies a un iform nega tive potential to the drum which rotates at a fixed speed .  BCR keeps contact with the d rum and moves together with it . BCR is [...]

EPSON AcuLaser C110 0 Revision B OPERATING PRINCIPLES Print Proces s 78 2.1.3.2 Exposure At the “Exposure” proces s, a laser beam is applied to the negatively charged surface of the drum to f orm an invisible electro static latent image onto the drum.  The laser beam is emitted from a laser diode in the ROS ASSY, and directed by the poly gon[...]

EPSON AcuLaser C110 0 Revision B OPERATING PRINCIPLES Print Proces s 79 2.1.3.3 Developing At the “Developing” proces s, toner is electri cally applied to the invisible electrostatic latent image on the d rum, to form a visivle image on it.  This printer uses two d eveloping syst ems: a “rotary d eveloping system” that successively rotat[...]

EPSON AcuLaser C110 0 Revision B OPERATING PRINCIPLES Print Proces s 80  Toner in the Dev eloper Assy is cons umed as the n umber of pr ints increases. To maintain t he approp riate developm ent densi ty, the equi valent amou nt of cons umed tone r mus t be re pleni shed to the Dev e loper Ass y f rom t he To ner C artri dge . This replenishment[...]

EPSON AcuLaser C110 0 Revision B OPERATING PRINCIPLES Print Proces s 81 2.1.3.4 Primary transfer (Drum → Belt) At the “Primary transf er” process, the to ner imag e formed on the drum surface is transferred to the B elt surface in Photoco nductor Unit by 1st BTR (First Bias Transfer Roll).  The 1st BTR is a conductive roller, and is positi[...]

EPSON AcuLaser C110 0 Revision B OPERATING PRINCIPLES Print Proces s 82 2.1.3.5 Cleaning (drum) At the “Cleaning (d rum)” process, r esidual toner is removed from the drum surf ace.  Cleaning the drum Toner that was not transferred to the Belt at the “Primary transfer” proces s remains on the drum surface. Since the r emaining t oner hin[...]

EPSON AcuLaser C110 0 Revision B OPERATING PRINCIPLES Print Proces s 83 2.1.3.6 Repeat (formation of complete t oner image) At the “Repeat (formation of complete toner image)” proces s, th e to ner images of each color formed on the drum surface are successi vely transferred to the Belt to f orm a complete toner imag e composed of th e four col[...]

EPSON AcuLaser C110 0 Revision B OPERATING PRINCIPLES Print Proces s 84 2.1.3.7 Secondary transfer (Belt → Pap er) At the “Secondary tran sfer” process, the co m plete toner image formed on the Belt surface is trans ferred to paper by the 2nd B TR (Second Bias Transfer Roll).  The 2nd BTR co mes in contact with the Be lt only when tran sfe[...]

EPSON AcuLaser C110 0 Revision B OPERATING PRINCIPLES Print Proces s 85 2.1.3.8 Discharging At the “Discharging” process, the charge on the paper is neutralized /removed by the Detack Saw.  The Detack Saw contacts the back side of the paper. The charg e created at the “Secondary transfer” process is neutr ali zed/removed to prevent the t[...]

EPSON AcuLaser C110 0 Revision B OPERATING PRINCIPLES F low of Print Data 86 2.2 Flo w of Print Dat a 2.2.1 Da ta Flow Print data (electric signals) from the Printer Controller follows the flow show n below to become a pr int image. Figu re 2-17 . Overv iew of P roduci ng Pr i n t Imag e <Reference> Formation o f 2-D print ima ge: One line of[...]

EPSON AcuLaser C110 0 Revision B OPERATING PRINCIPLES Drive Tra nsmission Pat h 87 2.3 Drive Tran smissi on Pat h 2.3.1 DR IVE ASSY FEED Rotation of DRIVE ASSY FEED is tran smitted as follows: Figure 2-19 . Drive Transmiss ion Flow Figure 2-20 . Diagram of Driv e Transmissi on Path DRIVE ASSY FEED CLUTCH ASSY FEED ROLL ASSY TURN 500 GEAR FEED ROLL [...]

EPSON AcuLaser C110 0 Revision B OPERATING PRINCIPLES Drive Tra nsmission Pat h 88 2.3.2 MO TOR ASSY P/R, DR IVE ASSY PRO Rotation of MOTOR AS SY P/R and DRIVE ASSY PRO is transm itted as follows: Figure 2-21 . Drive Transmiss ion Flow Figure 2-22 . Diagram of Driv e Transmissi on Path DRIVE ASSY PRO MOT ASSY P/R FLANGE GEAR INPUT GEAR BRUSH 22/30 [...]

EPSON AcuLaser C110 0 Revision B OPERATING PRINCIPLES Drive Tra nsmission Pat h 89 2.3.3 MO TOR ASSY MAG, MOTOR ASSY RO T Rotation of MOTOR ASSY MAG an d MOTOR ASSY ROT is transmitt ed as follo ws: Figure 2-23 . Drive Transmiss ion Flow Figure 2-24 . Diagram of Driv e Transmissi on Path MOT ASSY MAG MOT ASSY ROT GEAR IDLE DISP GEAR AUGER DISPENCE I[...]

EPSON AcuLaser C110 0 Revision B OPERATING PRINCIPLES Drive Tra nsmission Pat h 90 2.3.4 MO TOR ASSY DUP Rotation of MOTOR ASSY DUP is transmitted as follows: Figure 2-25 . Drive Transmiss ion Flow Figure 2-26 . Diagram of Driv e Transmissi on Path MOTOR ASSY DUP MOTOR ASSY DUP INV GEAR 40/42 GEAR 36 GEAR 48H GEAR 40/42 TRANSPORT ASSY DUP INVERTER [...]

EPSON AcuLaser C110 0 Revision B OPERATING PRINCIPLES Drive Tra nsmission Pat h 91 2.3.5 MO TOR ASSY FSR Rotation of MOTOR AS SY FSR is transmitt ed as follows: Figure 2-27 . Drive Transmiss ion Flow Figure 2-28 . Diagram of Driv e Transmissi on Path MOTOR ASSY FSR (Fuser Motor) GEAR-IDLER EXIT GEAR EXIT GEAR HR ROLL ASSY FUSER FUSER ASSY TRANSFER [...]

EPSON AcuLaser C110 0 Revision B OPERATING PRINCIPLES Drive Tra nsmission Pat h 92 2.3.6 MO TOR-PH Rotation of MOTOR-PH is transmitted as follows: Figure 2-29 . Drive Transmiss ion Flow Figure 2-30 . Diagram of Driv e Transmissi on Path GEAR 43 CLUTCH ASSY REGI GEAR 43 CLUTCH ASSY PRE REGI PH ASSY MSI ROLL REGI MET AL ROLL ASSY -PRE REGI ROLL REGI [...]

EPSON AcuLaser C110 0 Revision B OPERATING PRINCIPLES Paper Feed 93 2.4 Paper Feed This section explains and illust rates the main functional compon ents that make up the paper feed s ection. The components are divided into four blocks as fo llows based on the basic configurati o n.  MSI (Multi Sheet Inserter)  Regis trat ion & FU SER [...]

EPSON AcuLaser C110 0 Revision B OPERATING PRINCIPLES Paper Feed 94 2.4.1 MSI (Multi Sheet Inserter) MAIN FUNCTIONS  GUIDE SIDE L/GUIDE ASSY SIDE R GUIDE SIDE L and GUIDE ASSY SIDE R move crossways of the paper feed direction, a nd tr ue up the left a nd right edges of sheets of pap er.  SOLENOID PICK UP The SOLENOID PICK UP controls rotation[...]

EPSON AcuLaser C110 0 Revision B OPERATING PRINCIPLES Paper Feed 95 2.4.2 Reg istration & FUSER MAIN FUNCTIONS  CLUTCH ASSY PRE REGI The drive from the MOTOR-PH is transmitted to the ROLL ASSY-PRE REGI, and paper i s fed to t he registra tion section.  SENSOR OHP This reflective sensor d etects whethe r the print medi a is plain p aper or[...]

EPSON AcuLaser C110 0 Revision B OPERATING PRINCIPLES Paper Feed 96 2.4.2.1 Adjusting the leading edge of the paper If paper is fed up to the toner transf er section from the tray or cass ette without adjusting the alignment of the paper, the im age sometimes cannot be transferred at the correct position. In the registration s ection, the leading e[...]

EPSON AcuLaser C110 0 Revision B OPERATING PRINCIPLES Paper Feed 97 2.4.3 5 00 Paper Feeder MAIN FUNCTIONS  CONNECTOR (H ARNESS-ASSY FEED1) This is used for performing communications with the main unit and supplying power to the Paper Feeder.  PWBA TRAY 500 Control s Motors and Sensors i n the 500 P aper Feed er.  500 PAP ER CASSETTE ASSY [...]

EPSON AcuLaser C110 0 Revision B OPERATING PRINCIPLES Paper Feed 98  SOLENOID FEED The SOLENOID FEED controls rotation of the Feed Gear. When the SOLENOID FEED turns ON, the Feed Gear is un lock ed and Feed Roll rotates. T he SOLENOID FEED is repeatedly turned ON/OFF each time a sheet is fed to control the feeding timing.  ROLL ASSY FEED 500 [...]

EPSON AcuLaser C110 0 Revision B OPERATING PRINCIPLES Paper Feed 99 2.4.4 Dupl ex MAIN FUNCTIONS  SWITCH-DUP DOOR The SWITCH-DUP DOOR detects whether the Duplex door is opened or closed.  SOLENOID ASSY DUP The SELENOID ASSY DUP switches the gate inside th e Fuser. When the SELENOID ASSY DUP turns ON, the actuator pushes the gate up, and the p[...]

EPSON AcuLaser C110 0 Revision B OPERATING PRINCIPLES Xerographic 100 2.5 Xerogra phic This section explains and illustrates the main functional components that consist of the Xerographi c.  The Xerog raphic is di vided into t he followi ng four b locks based on the bas ic configurat ion.  ROS ASSY  Photoc onductor Unit  Developmen t ?[...]

EPSON AcuLaser C110 0 Revision B OPERATING PRINCIPLES Xerographic 101 2.5.1 RO S MAIN FUNCTIONS  ROS ASSY  ROS ASSY (Raster Output Scanner Assemb ly) is the exposur e unit that outputs the laser b eam to make the electros tatic latent image on the drum surface. (From her e on, ROS ASSY is simply called “ROS.”) ROS co nsists of the com pon[...]

EPSON AcuLaser C110 0 Revision B OPERATING PRINCIPLES Xerographic 102 2.5.2 P hotoconductor Unit MAIN FUNCTIONS Photoconductor Unit consists of the Belt, Belt Cleaner, Drum, Drum Cleaner, 1st BTR, and Waste Toner B oxes for each cleaner . And ANTENNA ASSY, SENSOR TR-0, SENSOR ASSY ADC, SENSOR IB T R ETRACT, SENSOR HUM & TEMP, MOT ASSY P/R, IBT [...]

EPSON AcuLaser C110 0 Revision B OPERATING PRINCIPLES Xerographic 103  SENSOR TNER FULL SENSOR TNER FULL detects the full s tate of the Waste To ner Box. Toner remaining on the dr um is s craped off by the Cleani ng Blade, and co llected i n the Waste Ton er Box. Th e Waste Toner B ox is pro vided with an actuator fo r blocki ng light entering t[...]

EPSON AcuLaser C110 0 Revision B OPERATING PRINCIPLES Xerographic 104 2.5.3 Dev elopment MAIN FUNCTIONS The Rotary Developer consists of four (f our colors) Toner Cartridges, ANTENNA CTRG, HOUSING ASSY-DEVE, and FRA ME AS SY R OTARY. And Dispense Clutch, MOT ASS Y MAG, MOT ASSY ROT, and SENSOR R OTARY HOME POS I are installed inside the printer for[...]

EPSON AcuLaser C110 0 Revision B OPERATING PRINCIPLES Xerographic 105  Dispense Clutch (I nside the MOT ASSY MAG) The Dispense Clutch is provided to transmit the drive of MOT ASSY MAG to rotate the Augers for supplying toner.  MOT ASSY MAG The MOT ASSY MAG rotates the Magnet Roll in the HOU SING ASSY-DEVE.  MOT ASSY ROT The MOT ASSY ROT ro[...]

EPSON AcuLaser C110 0 Revision B OPERATING PRINCIPLES Xerographic 106 2.5.4 Second B TR & FUSER MAIN FUNCTIONS  2ND BTR ASSY The Second BTR (2 ND BTR ASSY) is a conductive roll. I t contacts the back of pape r (bac k of the s ide to be pr i nted o n) and a volta g e is ap plie d from t he HV PS.  MOT ASSY MICRO MOT ASSY MICR O makes the B[...]

EPSON AcuLaser C110 0 Revision B OPERATING PRINCIPLES Electri cal 107 2.6 Electrical This section explains and illust rates the main functional com pon ents making up the Electrical system. MAIN FUNCTIONS  PWBA MCU PWBA MCU pe rforms communication with the printer co ntroller, and controls the parts to pe rfor m pri nt ing op era tions .  LV/[...]

EPSON AcuLaser C110 0 Revision B OPERATING PRINCIPLES Electri cal 108  PWBA E SS (P rint e r con tro l ler) PWBA ESS converts the print data is input via the network, USB, parallel ports, or other interfaces, and performs communications with the computer. Th e memory can be expand ed up to 256 MB with an additio nal memory (option).  OP PANEL[...]

EPSON AcuLaser C110 0 Revision B OPERATING PRINCIPLES Operating Modes 109 2.7 O perating Mo des The prin ter has the following six op erating modes :  WARM UP mode : The printer is warming up (until the printer is ready for printing).  READY mode : The printer has finis hed the warm- up and is ready for printing.  PRINTING mode : The print[...]

EPSON AcuLaser C110 0 Revision B OPERATING PRINCIPLES Control 110 2.8 Control 2.8.1 Paper size control As this printer do es not hav e switche s, etc. for detecting paper size, only the pap er length is detected by S ENSOR REGI du ring paper feed. When the paper size d oes not match the print data, an error is sent to the controller. 2.8.2 Co ntrol[...]

EPSON AcuLaser C110 0 Revision B OPERATING PRINCIPLES Control 111 Execution Sequence of TC control 1. Adjustment of SENSOR ASSY ADC The SENSOR ASSY ADC has two LEDs, o ne for black and the other for color. T o read each color's patch den sity, the lig ht emitted fro m the LED for black is reflected directly to the Common light r eceiv ing elem[...]

EPSON AcuLaser C110 0 Revision B OPERATING PRINCIPLES Control 112  Contro l of Tone r Cartri dge 1. Detect ion of Empt y stat us The judg ement of the Empty stat us of Ton er Cartri dges is mad e based o n toner patc h den sity value s (rea d by ADC senso r). W hen t oner p atch den sity is extr eme ly low, the pr inter ex ecutes forced suppl y [...]

EPSON AcuLaser C110 0 Revision B OPERATING PRINCIPLES Control 113 2.8.4 B elt position co ntrol In full color printing, positioning control of the images on the Belt is necessary so that the 4-color ton ers can be trans ferred to the same p osition to enable correct ov erlay of the 4-color ton ers. SENSOR TR-0 is an op tical reflective sensor, and [...]

EPSON AcuLaser C110 0 Revision B OPERATING PRINCIPLES Flying-s tart pri nting 114 2.9 Flying-start printing This pri nter improv es performan ce when prin ting full- color images by performi ng flying-start printing.  Sequence 1) Th e printer starts printin g as soo n as it f inishes t o receiv e Yello w data of one pa ge. 2) While t he Yel l ow[...]

EPSON AcuLaser C110 0 Revision B OPERATING PRINCIPLES Detecti on Mechanisms 115 2.10 Dete ction Mechanisms The follo wing shows a l ist of d etection f unctions. Tab le 2-1. Sensors Unit Det ecti on Item Availab ility Detection Method Remar ks MP tray Paper pr e sence det ectio n Available Actuator + Ph oto-interru ptive senso r Pap er s ize dete c[...]

EPSON AcuLaser C110 0 Revision B OPERATING PRINCIPLES Detecti on Mechanisms 116 Toner Cartridge New part detection Available CRUM Presence Det ect i on Available CRUM Color de tection Available CRUM Cannot be inco rrectly insta lled as the locatio n of t he holes are different for each color. Remain ing a m ou nt detectio n Available Software count[...]

EPSON AcuLaser C110 0 Revision B OPERATING PRINCIPLES Principle of Electr ic Cir cuit Operat ion 117 2.11 Princ iple of Electric Circuit Operation 2.1 1.1 Ma in Features  Host-based controller using ESC/Page-S Printing System as its print lang uage  Engine speci fications: A 4, Color 5 pp m/Black-and-w hite 25 ppm, 600 dpi, Du plex printing i[...]

EPSON AcuLaser C110 0 Revision B OPERATING PRINCIPLES Principle of Electr ic Cir cuit Operat ion 118 Figure 2-57 . C567MAIN Circuit B lock Diagra m Figure 2-58. Circuitry Block Diagram Panel Sp ecifications 40 8 pa nel(wit h L CD) Pixe l coun t Specifications PCC+2 exte rnal devices Specified d evices UPD617G2-E1-A SN74A HC2G240H DCT3 PWM Accuracy [...]

CHAPTER 3 TROUBLES HOOTING[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING Procedure for t roubleshooti ng 120 3.1 Pr ocedure f or troubleshoo ting For efficient troubleshoo ting, verify the cond ition of the trouble carefully, and use FIP (Fault Isol ation Proced ures) and wiring conn ection diagr ams, and operating pri nciples. 3.1.1 Pro cedure for troubles hooting Perfor[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING Procedure for t roubleshooti ng 121 3.1.3 Precautio ns in Performing Troubleshooti ng Work 1. Be sure t o unplug the POWER CORD bef ore starting troubl eshooting work except whe n turning power ON is ne eded. 2. If you pe rform work wi th the powe r turned ON, c overs removed, and t he interl ock and[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING Procedure for t roubleshooti ng 122 3.1.4 Notes on Using FIP 1. The trouble shooti ng method describe d here assumes tha t there i s no malfunct ion in the print er contr oller (PWBA ESS). If y ou cannot f ix a problem e ven by f ollowing t he troubl eshooti ng procedu re, re place the printe r cont [...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING Procedure for t roubleshooti ng 123 3.1. 5 Warmin g- Up Flow chart at Po wer-ON The following flowchart (outline) shows the printer’s warm-up operation, fr om power-on to when the printer is ready to print. Figure 3- 2. Warming-up flowchart a t power-on Leg_Sec001_031F A Power ON Error displayed? W[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP 124 3.2 FIP 3.2.1 Ou tline FIP is provided as the first step to identify the cause of trouble. FIP is a guide for proceeding with tr oubleshooting while check ing error codes and fo r various oth er symptoms of trou ble. 3.2.2 FIP P rocedure Is an error co de dis pla yed on th e panel ? Teach the[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 125 3.3 FIP according to the printer message 3.3.1 List of Errors and Warnings ER ROR LIST RE LA TED TO PA PE R JA M Figure 3-3. Ja mmed Location SENSOR T/R SENSOR OHP SENSOR REGI SENSOR LO W P A TH CLUTCH ASSY REGI Exit Sensor (Inside FUSER ASSY) FUSER ASSY D[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 126 Jam DM -- - SENSOR LOW PATH was ON at Power ON or when I/L was closed. (Sta tic Ja m) 38 (p.191) Jam C Jam D -- - SENSOR UPPER PATH was ON at Power ON or when I/L was closed. (Sta tic Jam) Jam LC, G --- SENSOR T/R was ON at Power ON or when I/L was closed.[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 127 OTHER ERRORS AND WARNINGS Table 3-2. List of Errors and Warnings Class Panel Message Error LED Description See FIP Warnin g Y Toner Low --- The toner sup ply time of the Yellow toner ca rtridge has reached the preset ti me. The prin ter, howev er, can be o[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 128 Error TonerCart Error M ON A communication error occurred between PWBA MCU and ANTENNA CTRG (CRUM CTRIG). 14 (p.147) An error occurre d when writing da ta to ANTENNA CTRG (CRUM CTRIG). 15 (p.148) A Magenta t oner cartridge wi th a memory of differe nt spec[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 129 Eeeor G Open ON Th e Cover of Tray 1 is open. 68 (p.226) DM Open ON Dup lex Co ver is ope n. 69 (p.227) D Open ON Dupl ex is op en. 70 (p.228) B Open ON CO VER TOP is o pen. 71 (p.229) Table 3-2. List of Errors and Warnings Class Panel Message Error LED De[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 130 3.3.2 List of Serv ice Request Table 3-3. List of Service Request Class Panel Messae g Descript ion See FIP Engin e Rel ated ( E ) Servi ce Re q E510 ROS Motor Failure 44 (p.197) PWBA MC U c ou ld not rece ive sign al s output f rom SOS Sen sor in ROS with[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 131 Engine Relat ed ( E) Servi ce Re q E527 Deve Ho me P ositi on Sen sor Error 45 (p.198) PWBA MCU coul d not re ceive signals o utput from Rotary Home P osition Sen sor within th e specifie d time afte r rotation o f Rotary Develo per. Servi ce Re q E530 Hum[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 132 Controller Related (C) Service Req C0017 CPU error (undefined in terruption) C1 (p .239 ) Service Req C0081 CPU error (TLB modification exception) Service Req C0082 CPU error (TLB miss exception [Load/Fetch]) Service Req C0083 CPU error (TLB miss exception[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 133 Controller Related (C) Service Req C0256 CPU error (divide by 0) C1 (p .239 ) Service Req C0257 CPU error (arithmetic overflow) Service Req C0258 CPU error (break occurrence) Service Req C0800 IPL error (controller defect) Service Req C0998 Engine communic[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 134 3.3.3 Error Code FIP 3.3.3.1 Engine related error FIP-1  Panel Mess age  Install Y TnrCart  Possible parts that caused the err or  Troubleshooting  Toner Cartridge Y  HOUSING ASSY-DEVE Y  ANTENNA CTRG  HA RNESS ASSY MAIN  ANTENNA[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 135 FIP-2  Panel Mess age  Install M TnrC art  Possible parts that caused the err or  Troubleshooting  Toner Cartridge M  HOUSING ASSY-DEVE M  ANTENNA CTRG  HARNESS ASSY MAIN  ANTENNA ASSY-CTRG  PWBA M CU Step Check Yes No 1 Mode [...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 136 FIP-3  Panel Mess age  Install C TnrCart  Possible parts that caused the err or  Troubleshooting  Toner Cartridge C  HOUSING ASSY-DEVE C  ANTENNA CTRG  HARNESS ASSY MAIN  ANTENNA ASSY-CTRG  PWBA M CU Step Check Yes No 1 Mode l[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 137 FIP-4  Panel Mess age  Install K TnrCart  Possible parts that caused the err or  Troubleshooting  Toner Cartridge K  HOUSING ASSY-DEVE K  ANTENNA CTRG  HARNESS ASSY MAIN  ANTENNA ASSY-CTRG  PWBA M CU Step Check Yes No 1 Mode l[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 138 FIP-5  Panel Mess age  Install P hotocondctr  Possible parts that caused the err or  Troubleshooting  Photocond uctor Un it  H ARNESS-ASSY XERO  GUIDE CRU ASSY D or ANTENNA ASSY  PWBA MCU Step Check Yes No 1 Model ch ec k of Photoco[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 139 FIP-6  Panel Mess age  Photocon dctr T rouble  Possible parts that caused the err or  Troubleshooting  Photocond uctor Un it  GUIDE CRU ASSY D or ANTENNA ASSY  HARNESS-ASSY XER O  PWBA MCU  LV/HVPS Step Check Yes No 1 Model ch ec[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 140 FIP-7  Panel Mess age  Photocon dctr T rouble  Possible parts that caused the err or  Troubleshooting  Photocond uctor Un it  GUIDE CRU AS SY D or ANTENNA ASSY  HARNESS-ASSY XER O  PWBA MCU  LV/HVPS Step Check Yes No 1 Attachment[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 141 FIP-8  Panel Mess age  Photocon dctr T rouble  Possible parts that caused the err or  Troubleshooting  Photocond uctor Un it  PWBA MCU  HARNESS A SSY MAIN  LV/HVPS Step Check Yes No 1 Model ch ec k of Photoco nduc tor Uni t Is a Pho[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 142 FIP-9  Panel Mess age  Wrong P hotocon dctr  Possible parts that caused the err or  Troubleshooting  Photocond uctor Un it  PWBA MCU  HARNESS A SSY MAIN  LV/HVPS Step Check Yes No 1 Model ch ec k of Photoco nduc tor Uni t Is a Photo[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 143 FIP-10  Panel Mess age  Ton e rCar t Err or Y  Possible parts that caused the err or  Troubleshooting  Toner Cartridge Y  ANTENNA ASSY- CTRG or ANT ENNA CTRG  HARNESS A SSY MAIN  PWBA MCU  LV/HVPS Step Check Yes No 1 Mode l ch ec[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 144 FIP-11  Panel Mess age  Ton e rCar t Err or Y  Possible parts that caused the err or  Troubleshooting  Toner Cartridge Y  ANTENNA ASSY-C TRG or ANTENNA CTRG  HARNESS A SSY MAIN  PWBA MC U  LV/HVPS Step Check Yes No 1 Attachment c[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 145 FIP-12  Panel Mess age  Ton e rCar t Err or Y  Possible parts that caused the err or  Troubleshooting  Toner Cartridge Y  PWBA MCU  HARNESS A SSY MAIN  LV/HVPS Step Check Yes No 1 Mode l ch ec k of Ton er Ca r t ri dg e Y Is a Toner[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 146 FIP-13  Panel Mess age  Wrong To ner Y  Possible parts that caused the err or  Troubleshooting  Toner Cartridge Y  PWBA MCU  HARNESS A SSY MAIN  LV/HVPS Step Check Yes No 1 Mode l ch ec k of Ton er Ca r t ri dg e Y Is a Toner Cartri[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 147 FIP-14  Panel Mess age  Ton e rCar t Err or M  Possible parts that caused the err or  Troubleshooting  Toner Cartridge M  ANTENNA ASSY-CT RG or ANTENNA CTRG  HARNESS A SSY MAIN  PWBA MCU  LV/HVPS Step Check Yes No 1 Mode l ch ec [...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 148 FIP-15  Panel Mess age  Ton e rCar t Err or M  Possible parts that caused the err or  Troubleshooting  Toner Cartridge M  ANTENNA ASSY-CTRG or ANTE NNA CTRG  HARNESS A SSY MAIN  PWBA MC U  LV/HVPS Step Check Yes No 1 Attachment c[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 149 FIP-16  Panel Mess age  Ton e rCar t Err or M  Possible parts that caused the err or  Troubleshooting  Toner Cartridge M  PWBA MCU  HARNESS A SSY MAIN  LV/HVPS Step Check Yes No 1 Mode l ch ec k of Ton er Ca r t ri dg e M Is a Toner[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 150 FIP-17  Panel Mess age  Wrong To ner M  Possible parts that caused the err or  Troubleshooting  Toner Cartridge M  PWBA MCU  HARNESS A SSY MAIN  LV/HVPS Step Check Yes No 1 Mode l ch ec k of Ton er Ca r t ri dg e M Is a Toner Cartri[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 151 FIP-18  Panel Mess age  Ton e rCar t Err or C  Possible parts that caused the err or  Troubleshooting  Toner Cartridge C  ANTENNA ASSY-CT RG or ANTENNA C TRG  HARNESS A SSY MAIN  PWBA MC U  LV/HVPS Step Check Yes No 1 Mode l ch e[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 152 FIP-19  Panel Mess age  Ton e rCar t Err or C  Possible parts that caused the err or  Troubleshooting  Toner Cartridge C  ANTENN A ASSY-CTRG or ANTENNA CTRG  HARNESS A SSY MAIN  PWBA MC U  LV/HVPS Step Check Yes No 1 Attachment c[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 153 FIP-20  Panel Mess age  Ton e rCar t Err or C  Possible parts that caused the err or  Troubleshooting  Toner Cartridge C  PW BA MC U  HARNESS A SSY MAIN  LV/HVPS Step Check Yes No 1 Mode l ch ec k of Ton er Ca r t ri dg e C Is a Ton[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 154 FIP-21  Panel Mess age  Wrong To ner C  Possible parts that caused the err or  Troubleshooting  Toner Cartridge C  PW BA MC U  HARNESS A SSY MAIN  LV/HVPS Step Check Yes No 1 Mode l ch ec k of Ton er Ca r t ri dg e C Is a Toner Cart[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 155 FIP-22  Panel Mess age  Ton e rCar t Err or K  Possible parts that caused the err or  Troubleshooting  Toner Cartridge K  ANTENNA ASSY-CTR G or ANTENNA CTRG  HARNESS ASSY MAIN  PWBA MC U  LV/HVPS Step Check Yes No 1 Mode l ch ec [...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 156 FIP-23  Panel Mess age  Ton e rCar t Err or K  Possible parts that caused the err or  Troubleshooting  Toner Cartridge K  ANTENNA ASSY-C TRG or ANTENNA CTRG  HARNESS A SSY MAIN  PW BA MCU  LV/HVPS Step Check Yes No 1 Mode l ch ec[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 157 FIP-24  Panel Mess age  Ton e rCar t Err or K  Possible parts that caused the err or  Troubleshooting  Toner Cartridge K  PWBA MCU  HARNESS A SSY MAIN  LV/HVPS Step Check Yes No 1 Mode l ch ec k of Ton er Ca r t ri dg e K Is a Toner[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 158 FIP-25  Panel Mess age  Wrong To ner K  Possible parts that caused the err or  Troubleshooting  Toner Cartridge K  PWBA MCU  HARNESS A SSY MAIN  LV/HVPS Step Check Yes No 1 Mode l ch ec k of Ton er Ca r t ri dg e K Is a Toner Cartri[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 159 FIP-26  Panel Mess age  Jam LC , G  Possible parts that caused the err or  Troubleshooting  ROLL ASSY TURN 5 00  ROLL ASSY FEED 500  HOLDER ASS Y RETARD 500  SOLENOID FEED  HARNESS A SSY MAIN  DRIVE ASSY FEED  PWBA TRAY 500[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 160 11 Conti nuity chec k of HARNESS ASSY MAIN Disconne ct P/J4 21 from PWBA MCU. Do all of th e wiring below have normal continu ity? J421-7 ↔ J608 -4 J421-8 ↔ J608 -3 J421-9 ↔ J608 -2 Replace PWBA MCU. (p.404) Repair bro ken or shor ted pa r t. 12 Oper[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 161 22 Operation c heck of CLUTCH AS SY FEED Does CLUTCH ASSY FEED operate normally? Make a te st print and co nfirm by t he operating noise. Go t o S t ep [ 30 ]. G o to St e p [ 23 ] . 23 Continuity check of HARNES S-ASSY FEED MAIN Disconne ct P/J4 37 from P[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 162 FIP-27  Panel Mess age  Jam MP, E  Jam D, E  Possible parts that caused the err or  Troubleshooting  ROLL MSI  HOLDER ASSY RETARD MSI  CHUTE ASSY PAPER GUIDE  ROLL ASSY -PRE REGI  ROLL-PINCH  ACTUATOR-REGI.  SENSOR REGI [...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 163 11 Continuity check of HARNESS-ASSY P/H1 Disconne ct the P/J4 08 from PWB A MCU. Do all of th e wiring below have normal continu ity? J408-10 ↔ J603-3 J408-11 ↔ J603-2 J408-12 ↔ J603-1 Go t o S t ep [ 12 ]. Re place HARNESS- ASSY P/H 1. 12 Continuity[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 164 21 Continuity check of HARNESS-ASSY P/H2 Disconne ct P/J6 03. Do all of th e wiring below have normal continu ity? P603 -1 ↔ P202- 2 P603 -2 ↔ P202- 1 Go t o S t ep [ 22 ]. Re place HARNESS- ASSY P/H 2. 22 Check of resistance valu e of CLUTCH ASSY PRE [...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 165 FIP-28  Panel Mess age  Jam E  Possible parts that caused the err or  Troubleshooting  ROLL ASSY TURN 5 00  HO LDER ASSY RETARD 500  ROLL ASSY FEED 500  ROLL PINCH A  ROLL PINCH B  ROLL ASSY -PRE REGI  ROLL-PINCH  ACTUAT[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 166 11 Operation chec k of SE NSO R REGI The vol t age of P408- 1 2 ↔ P408- 11 on PWBA MCU is 0 VDC when ACTUATOR REGI enter s the s ensor sens ing are a, an d is 5 VDC when it leaves t he sen sing area? Go t o S t ep [ 17 ]. G o to St e p [ 12 ] . 12 5 VDC [...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 167 23 Continuity check of HARNESS-ASSY P/H2 Disconne ct P/J6 03. Do all of th e wiring below have normal continu ity? P603 -1 ↔ P202- 2 P603 -2 ↔ P202- 1 Go t o S t ep [ 24 ]. Re place HARNESS- ASSY P/H 2. 24 Check of resistance valu e of CLUTCH ASSY PRE [...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 168 FIP-29  Panel Mess age  Jam E  Jam D, E  Possible parts that caused the err or  Troubleshooting  ROLL A SSY PRE- REGI  ROLL-PINCH  ROLL-REGI METAL  ROLL REG I RUBBE R  ACTUATOR-REGI  SENSOR REGI  MOTOR-PH  HARNESS- AS[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 169 10 Check after replac eme nt of MOTOR-PH Replace MOTOR-PH. (p.337) Does the error recur wh en the power is turned ON? Replace PWBA MCU. (p.404) End of proc edure 11 5 VDC po wer s upply che ck to S ENSOR REG I The vol t age of P408- 1 0 ↔ P408- 11 on PWB[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 170 FIP-30  Panel Mess age  Jam E, F  Jam D, E, F  Possible parts that caused the err or  Troubleshooting  FUSER AS SY  ROLL-REGI METAL  ROLL REGI RUBBER  CLUTCH AS SY REGI  HARNESS-A SSY P/H1  HARNESS-ASSY P/H2  MOTOR-PH ?[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 171 11 Continuity check of HARNESS-ASSY P/H1 Disconne ct the P/J4 08 from PWB A MCU. Do all of th e wiring below have normal continu ity? J408-3 ↔ J603 -10 J408-4 ↔ J603 -9 Go t o S t ep [ 12 ]. Re place HARNESS- ASSY P/H 1. 12 Continuity check of HARNESS-[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 172 22 Continuity check of HARNES S ASSY 2BTR SENS Discon n ect P/J62 0 from HARNE SS ASSY 2BTR SE NS. Do all of th e wiring below have normal continu ity? P620 -1 ↔ J111-3 P620 -2 ↔ J111-2 P620 -3 ↔ J111-1 Replace SENSOR FUSER IN. (p. 344) Replace HARNE[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 173 32 Continuity check of HARNES S ASSY FUSER SENS and HARNESS ASSY FUSER in FUSER ASSY Allow FUSER ASSY to cool down before perfo rming work. Remove FUSE R ASSY . (p.388) Disconne ct P/J619 an d P /J110 in FUSE R ASSY. Do all of th e wiring below have normal[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 174 FIP-31  Panel Mess age  Jam C, E, F  Jam D, E, F  Possible parts that caused the err or  Troubleshooting  FUSER AS SY  ROLL-REGI METAL  ROLL REGI RUBBER  CLUTCH AS SY REGI  HARNESS-A SSY P/H1  HARNESS-ASSY P/H2  MOTOR-PH[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 175 11 Continuity check of HARNESS-ASSY P/H1 Disconne ct the P/J4 08 from PWB A MCU. Do all of th e wiring below have normal continu ity? J408-3 ↔ J603 -10 J408-4 ↔ J603 -9 Go t o S t ep [ 12 ]. Re place HARNESS- ASSY P/H 1. 12 Continuity check of HARNESS-[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 176 22 Continuity check of HARNES S ASSY 2BTR SENS Discon n ect P/J62 0 from HARNE SS ASSY 2BTR SE NS. Do all of th e wiring below have normal continu ity? P620 -1 ↔ J111-3 P620 -2 ↔ J111-2 P620 -3 ↔ J111-1 Replace SENSOR FUSER IN. (p. 344) Replace HARNE[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 177 32 Continuity check of HARNES S ASSY FUSER SENS and HARNESS ASSY FUSER in FUSER ASSY Allow FUSER ASSY to cool down before perfo rming work. Remove FUSE R ASSY . (p.388) Disconne ct P/J619 an d P /J110 in FUSE R ASSY. Do all of th e wiring below have normal[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 178 FIP-32  Panel Mess age  Check Transparency  Possible parts that caused the err or  Troubleshooting  SENSOR OH P  HA RNESS -ASSY P/H1  HARNESS-A SSY P/H2  PW BA MC U  HARNESS A SSY MAIN  LV/HVPS Step Check Yes No 1 Check of tra[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 179 FIP-33  Panel Mess age  Jam E  Jam D, E  Possible parts that caused the err or  Troubleshooting  ROLL-REGI METAL  ROLL REG I RUBBE R  2ND BTR ASSY  SHAFT-CENT 2ND  FRAME ASSY BTR  BEARING-B RUSH CAM  Photocond uctor Un i[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 180 11 Continuity check of HARNES S ASSY ADC Disconne ct P/J418 an d P /J620 from P WBA MCU. Do all of th e wiring below have normal continu ity? J418-1 ↔ J620 -3 J418-2 ↔ J620 -2 J418-3 ↔ J620 -1 Go t o S t ep [ 12 ]. Re place HARNESS ASSY ADC. 12 Conti[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 181 23 Conti nuity chec k of HARNESS ASSY MAIN Disconne ct P/J410 fr om PWBA MCU an d P/ J502 from LV/HVPS . Do all of th e wiring below have normal continu ity? J410-5 ↔ J502 -5 J410-6 ↔ J502 -6 J410-7 ↔ J502 -7 J410-8 ↔ J502 -8 Replace LV/ HVPS. (p.4[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 182 FIP-34  Panel Mess age  Jam C  Jam D  Possible parts that caused the err or  Troubleshooting  EXIT SENSOR (Sensor in Fuser)  FUSER ASSY  HARNESS ASSY MCU C/L  PWBA MC U  LV/HVPS  MOT ASSY FS R Step Check Yes No 1 Check of t[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 183 10 Continuity check of HARNES S ASSY MCU C/L Allow FUSER ASSY to cool down before perfo rming work. Remove FUSE R ASSY . (p.388) Disconne ct P/J4 17 from PWBA MCU. Do all of th e wiring below have normal continu ity? J417-6 ↔ J614 A-7 J417-7 ↔ J614 A-6[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 184 FIP-35  Panel Mess age  Jam D, E, DM  Possible parts that caused the err or  Troubleshooting  ROLLER ASSY INVERTER  ROLL PINCH DUP  ROLL ASSY PINCH DUP  FUSER AS SY  MOTOR ASSY DUP INV  ROLLER ASSY DUP  ROLLER ASSY DUP OUT [...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 185 9 Check of ROLLER ASSY DUP, ROLLER ASSY DUP OUT and ROLL PINCH DUP Open Dupl ex. Are ROLLER ASSY DUP, ROLLER ASSY DUP OUT, and ROLL PINCH DUP attached correctly? Also, do the se parts rotate smooth ly without any dirt or damage? Turn by hand to ch eck. Go [...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 186 22 5 VDC power supply check to PWBA MCU The vol t age of P410- 3 ↔ P410- 4 on PWBA MCU is 5 VDC? Replace PWBA MCU. (p.404) Go to St e p [ 23 ]. 23 Conti nuity chec k of HARNESS ASSY MAIN Disconne ct P/J410 fr om PWBA MCU an d P/ J502 from LV/HVPS . Do al[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 187 FIP-36  Panel Mess age  Jam DM  Possible parts that caused the err or  Troubleshooting  SENSOR L OW PAS S  ROLLER ASSY DUP  ROLLER ASSY DUP OUT  ROLL PINCH DU P  ACTUATOR DUP  MO TO R ASSY DUP  HARNESS-ASSY DUP 2  HARNES[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 188 10 Check after replac ement of MOTOR ASSY DUP (Lower Roll Motor) Replace MOTOR ASSY DUP. (p.443) Does the error recur when a test print is made in the duplex m ode? Go to Step [9]. End of proc edure 11 5 VDC power supply check to SENSOR LOW PASS The vol t [...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 189 FIP-37  Panel Mess age  Jam C  Jam D  Possible parts that caused the err or  Troubleshooting  SENSOR UPPER P ASS  ROLLER ASSY INVERTER  ROLL PINCH DUP  ROLL ASSY PINCH DUP  FUSER AS SY  AC TUATOR INV  MOTOR ASSY DUP INV [...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 190 9 5 VDC power supply check to SENSOR UPPER PASS The vol t age of P444- 8 ↔ P444- 9 on PWBA DUP-L is 5 VDC? Go t o S t ep [ 10 ]. G o to St e p [ 15 ] . 10 Conti nuit y che ck of HARNESS-A SSY DUP1 Disconne ct P/J4 44 from P WBA DUP- L. Do all of th e wir[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 191 FIP-38  Panel Mess age  Jam DM  Jam C  Jam D  Jam LC , G  Jam E  Jam D, E  Jam C, E , F  Jam D, F  Possible parts that caused the err or  Troublesho oting  SENSOR L OW PAS S  SE NSOR UPPER PASS  SENSOR T /R  SEN[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 192 FIP-39  Panel Mess age  Service Req E5 17  Possible parts that caused the err or  Troubleshooting  HARNESS A SSY MAIN  HAR NES S-ASS Y FE ED 1  HARNESS-A SSY FE E D 2  PWBA TRAY 500  PWBA MCU  LV/HVPS Step Check Yes No 1 Check[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 193 FIP-40  Panel Mess age  Service Req E5 16  Possible parts that caused the err or  Troubleshooting  HARNESS A SSY MAIN  HARNESS-ASSY DU P2  PWBA DUP-L  PWBA M CU  LV/HVPS Step Check Yes No 1 Check of Duplex a ttachment on prin ter[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 194 FIP-41  Panel Mess age  Service Req E5 14  Possible parts that caused the err or  Troubleshooting FIP-42  Panel Message  Service Req E5 13  Possible parts that cause d the error  Trou blesh ooti ng *1: It is assumed to be due to ext[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 195 FIP-43  Panel Mess age  Service Req E5 11  Possible parts that caused the err or  Troubleshooting  Photocond uctor Un it  S ENSOR TR-0  HARNESS-ASSY XER O  MOTOR ASSY P/R  HARNESS A SSY MAIN  PW BA MC U  LV/HVPS Step Check [...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 196 13 Conti nuity chec k of HARNESS ASSY MAIN Disconne ct P/J502 from L V/HVPS. Do all of th e wiring below have normal continu ity? J502-9 ↔ J201 -1 J502-10 ↔ J201-2 Replace LV/ HVPS. (p.407) Re pair broken or shor ted pa r t. 14 5 VDC power supply check[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 197 FIP-44  Panel Mess age  Service Req E5 10  Possible parts that caused the err or  Troubleshooting  ROS A SSY  HARNESS ASSY MAIN  PWBA MCU  LV/HVPS Step Check Yes No 1 Check of ROS ASSY a ttachment Re- a tta c h RO S ASSY. (p.375) Do[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 198 FIP-45  Panel Mess age  Service Req E5 27  Possible parts that caused the err or  Troubleshooting  MOTOR ASSY MAG  SENSOR ROTARY HOME POS I  HARNESS A SSY MAIN  PW BA MC U  LV/HVPS Step Check Yes No 1 Check of FRAME ASSY-ROTARY a[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 199 FIP-46  Panel Mess age  Service Req E5 26  Possible parts that caused the err or  Troubleshooting  SENSOR AS SY ADC  HARNESS ASSY ADC  PWBA MCU  LV/HVPS Step Check Yes No 1 Check of dirt and forei gn bodies on surface of SENSOR ASSY[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 200 FIP-47  Panel Mess age  Service Req E5 25  Possible parts that caused the err or  Troubleshooting  Photocond uctor Un it  S ENSOR ASSY ADC  Toner Cartridge K  Toner Car tridge Y  Toner Cartridge M  Toner Car tridge C  HARNE[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 201 11 Check after replac ement of SENSOR HUM & TEMP Replace SENSOR HUM & TEMP. (p.400) Does the error recur wh en the power is turned ON? Go t o S t ep [ 12 ]. E n d of proc edure 12 Check after replac ement of ROS ASSY Replace ROS ASSY. (p.375) Does [...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 202 FIP-48  Panel Mess age  Service Req E5 24  Possible parts that caused the err or  Troubleshooting  Photocond uctor Un it  S ENSOR ASSY ADC  Toner Cartridge K  Toner Car tridge Y  Toner Cartridge M  Toner Car tridge C  HARNE[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 203 11 Check after replac ement of SENSOR HUM & TEMP Replace SENSOR HUM & TEMP. (p.400) Does the error recur wh en the power is turned ON? Go t o S t ep [ 12 ]. E n d of proc edure 12 Check after replac ement of ROS ASSY Replace ROS ASSY. (p.375) Does [...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 204 FIP-49  Panel Mess age  Service Req E5 23  Possible parts that caused the err or  Troubleshooting  Toner Cartridge K  Toner Car tridge Y  Toner Cartridge M  Toner Car tridge C  PWBA MCU Step Check Yes No 1 Check after replac emen[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 205 FIP-50  Panel Mess age  Irregular Density  Possible parts that caused the err or  Troubleshooting  SENSOR AS SY ADC  Photocondu ctor Un it  PWBA MCU  Tone r Cart ridge K  Toner Cartridge Y  Toner Car tridge M  Toner Cartrid[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 206 FIP-51  Panel Mess age  Service Req E5 21  Possible parts that caused the err or  Troubleshooting  HARNESS A SSY MAIN  MOT ASSY MICRO  SENSOR 2B TR RETRACT  HARNESS ASSY ADC  PWBA MCU  LV/HVPS Step Check Yes No 1 Check of 2ND [...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 207 10 Power supply check to PWBA M CU Are each o f the p ower voltages being supplied to the fo llowing term inals on PWB A MCU from LV/HVPS? P410 -1 ↔ P410- 2: 3. 3VDC P410 -3 ↔ P410- 4: 5VDC P410 -5/6 ↔ P 410 -7/8: 24VDC Replace PWBA MCU. (p.404) Go t[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 208 FIP-52  Panel Mess age  Service Req E5 20  Possible parts that caused the err or  Troubleshooting  HARNESS A SSY MAIN  MOT ASSY MICRO  SENSOR 2BTR RETRACT  HARNESS ASSY ADC  PWBA MCU  LV/HVPS Step Check Yes No 1 Check of DRIVE[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 209 11 Pow e r sup p ly ch ec k to PW B A M C U Are each o f the p ower voltages being supplied to the fo llowing term inals on PWB A MCU from LV/HVPS? P410 -1 ↔ P410- 2: 3. 3 VDC P410 -3 ↔ P410- 4: 5 VDC P410 -5/6 ↔ P 410-7/8 : 24 VDC Replace PWBA MCU. [...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 210 FIP-53  Panel Mess age  Service Req E5 37  Possible parts that caused the err or  Troubleshooting  FUSER AS SY  HA RNESS ASSY MCU C/ L  FFC-AS SY L V /MC U  HA RNESS ASSY AC  PWBA FUSER CONT  LV/HVPS  HARNESS A SSY MAIN [...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 211 FIP-54  Panel Mess age  Service Req E5 33  Possible parts that caused the err or  Troubleshooting FIP-55  Panel Message  Service Req E5 30  Possible parts that cause d the error  Trou blesh ooti ng  SENSOR HUM & TEMP  HA R[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 212 FIP-56  Panel Mess age  Service Req E5 47  Possible parts that caused the err or  Troubleshooting  HARNESS-ASSY FE ED MAIN  DRIVE ASSY FEED  PWBA TRAY 500  HARNE SS-AS SY FE ED 1  HARNESS A SSY MAIN  PW BA MC U  LV/HVPS Ste[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 213 10 5 VDC power supply check to PWBA TRAY 500 The vol t age of P435- 6 ↔ P435- 5 on PWBA TRAY CONT is 5 VDC? Replace PWBA TRAY 500. (p. 456) Go t o S t ep [ 11 ]. 11 Cont inuity check of HARNE SS-ASS Y FEED 1 Disconne ct P/J4 35 from PWBA TRAY CONT. Do al[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 214 FIP-57  Panel Mess age  Service Req E5 46  Possible parts that caused the err or  Troubleshooting  MOTOR ASSY DUP  MOTOR ASSY DUP INV  HARNESS A SSY MAIN  HARNESS-ASSY DU P2  PWBA MCU  LV/HVPS  HARNESS-ASSY DUP 1  PWBA D[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 215 11 Conti nuity chec k of HARNESS ASSY MAIN Disconne ct P/J410 fr om PWBA MCU an d P/ J502 from LV/HVPS . Do all of th e wiring below have normal continu ity? J410-1 ↔ J502 -1 J410-2 ↔ J502 -2 J410-3 ↔ J502 -3 J410-4 ↔ J502 -4 J410-5 ↔ J502 -5 J41[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 216 FIP-58  Panel Mess age  Service Req E5 42  Possible parts that caused the err or  Troubleshooting  DRIVE A SSY PRO  SENSOR IBT RETRACT  HARNESS A SSY MAIN  PW BA MC U  LV/HVPS Step Check Yes No 1 Check of con nection of DRIVE AS [...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 217 FIP-59  Panel Mess age  Replace Toner Y  Possible parts that caused the err or  Troubleshooting  Toner Cartridge Y  ANTENNA ASSY-CTRG or ANTEN NA CTRG  HARNESS A SSY MAIN  PWBA MC U Step Check Yes No 1 Check of Toner Car tridge Y at[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 218 FIP-60  Panel Mess age  Replace Toner M  Possible parts that caused the err or  Troubleshooting  Toner Cartridge M  ANTENNA ASSY-C TRG or ANTENNA CTRG  HARNESS A SSY MAIN  PW BA MCU Step Check Yes No 1 Check of Toner Car tridge M at[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 219 FIP-61  Panel Mess age  Replace Toner C  Possible parts that caused the err or  Troubleshooting  Toner Cartridge C  ANTENNA ASSY-CTRG or ANTE NNA CTRG  HARNESS A SSY MAIN  PWBA MC U Step Check Yes No 1 Check of Toner Car tridge C at[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 220 FIP-62  Panel Mess age  Replace Toner K  Possible parts that caused the err or  Troubleshooting  T oner Cartridge K  ANTENNA ASSY-C TRG or ANTENNA CTRG  HARNESS A SSY MAIN  PW BA MCU Step Check Yes No 1 Check of Toner Car tridge K a[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 221 FIP-63  Panel Mess age  Replace Photocon dctr  Possible parts that caused the err or  Troubleshooting  Photocond uctor Un it  S ENSOR TNER FULL  HARNESS A SSY MAIN  PW BA MC U  LV/HVPS Step Check Yes No 1 Attachment check of Phot[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 222 FIP-64  Panel Mess age  A Open  Possible parts that caused the err or  Troubleshooting  COVER FRONT ASSY U  S WITCH-FRONT DOOR  PWBA MCU  LV/HVPS Step Check Yes No 1 Check of open /c lo se state of COVER Is COVER FRONT ASSY U closed[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 223 FIP-65  Panel Mess age  E Ope n  Possible parts that caused the err or  Troubleshooting  CHUTE ASSY-REAR  SWITCH-PH DOOR  HARNESS-A SSY P/H1  HARNESS-ASSY P/H2  PWBA MCU  HARNESS ASSY MAIN  LV/HVPS Step Check Yes No 1 Shape[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 224 FIP-66  Panel Mess age  F Open  Possible parts that caused the err or  Troubleshooting  CHUTE ASSY -FSR  S WITCH 2BTR CO VER  HARNESS A SSY ADC  HARNESS ASSY 2BTR SW  PWBA MCU  LV/HVPS Step Check Yes No 1 Shape check of CHUTE [...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 225 FIP-67  Panel Mess age  C Open  Possible parts that caused the err or  Troubleshooting  COVER F U SE R  SWITCH -FUSER DOOR  PWBA MCU  LV/HVPS Step Check Yes No 1 Check of open /c lo se state of COVER Is COVER FUSER closed? Go to Ste[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 226 FIP-68  Panel Mess age  G Open  Possible parts that caused the err or  Troubleshooting  CHUTE FDR ASSY 5 00  SWITCH F EEDER DOOR  HARNESS-ASSY FE ED MAIN  HARN ESS-A SSY FEED 1  HARNESS A SSY MAIN  PW BA MC U  LV/HVPS Step [...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 227 FIP-69  Panel Mess age  DM Open  Possible parts that caused the err or  Troubleshooting  COVER UP-DUP TRAN S  SWITCH -DU P DOOR  HARNESS-ASSY DUP 1  HARNRSS-AS SY DUP2  HARNESS A SSY MAIN  PWBA DUP-L  PWBA MCU  LV/HVPS S[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 228 FIP-70  Panel Mess age  D Open  Possible parts that caused the err or  Troubleshooting  COVER-L DUP  SWITCH -FUSER DOOR  HARNESS A SSY MAIN  PW BA MC U  LV/HVPS Step Check Yes No 1 Shape check of COVER -L DUP on Dupl ex Is the ac[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 229 FIP-71  Panel Mess age  B Open  Possible parts that caused the err or  Troubleshooting  COVER TOP  COVER FRONT ASSY U  COVER F U SE R  SWIT CH ASSY TOP  SWITCH-INLK FRONT  SWITCH-INLK FUS ER  PWBA MCU  LV/HVPS Step Check[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 230 8 Operation chec k of SWITCH -INLK FU SER Disconnect P/J117 from SWITCH-INLK FUSE R. Is there contin uity o n P117-1 ↔ P117 -3 w hen SWITC H - I NLK FUSE R is pr e ssed, and do es the continu ity stop when t he switch is released? Go to Step [9]. Replace[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 231 FIP-72  Panel Mess age  Y Toner Low  Possible parts that caused the err or  Troubleshooting  Toner Cartridge Y  ANTENNA ASSY -CTRG  HARNESS A SSY MAIN  ANTENNA CTRG  PWBA MCU Step Check Yes No 1 Check of Toner Car tridge Y attach[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 232 FIP-73  Panel Mess age  M Toner Low  Possible parts that caused the err or  Troubleshooting  Toner Cartridge M  ANTENNA ASSY -CTRG  HARNESS A SSY MAIN  ANTENNA CTRG  PWBA MCU Step Check Yes No 1 Check of Toner Car tridge M attach[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 233 FIP-74  Panel Mess age  C Toner Lo w  Possible parts that caused the err or  Troubleshooting  Toner Cartridge C  ANTENNA ASSY-CTRG  HARNESS A SSY MAIN  ANTENNA CTRG  PWBA MCU Step Check Yes No 1 Check of Toner Car tridge C attach[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 234 FIP-75  Panel Mess age  K Toner Low  Possible parts that caused the err or  Troubleshooting  Toner Cartridge K  ANTENNA ASSY -CTRG  HARNESS A SSY MAIN  ANTENNA CTRG  PWBA MCU Step Check Yes No 1 Check of Toner Car tridge K attach[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 235 FIP-76  Panel Mess age  Worn P hotocond uctor  Possible parts that caused the err or  Troubleshooting  Photocond uctor Un it  S ENSOR TNER FULL  HARNESS A SSY MAIN  HARNESS-ASSY TNER F ULL  PWBA MCU  LV/HVPS Step Check Yes No [...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 236 FIP-77  Panel Mess age  Worn P hotocond uctor  Possible parts that caused the err or  Troubleshooting  Photocond uctor Un it  GUIDE CRU ASSY D or ANTENNA ASSY  HARNESS-ASSY XER O  PWBA MCU  LV/HVPS Step Check Yes No 1 Attachment [...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 237 FIP-78  Panel Mess age  Service Req E9 98  Possible parts that caused the err or  Troubleshooting  FFC-AS SY E SS  PWBA MC U  BOARD ASSY., MAIN Step Check Yes No 1 Check if the firmware ver sion of the PW BA MCU Check the firmware vers[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 238 FIP-79 Ele ctrical Noise  Possible parts that caused the err or  Troubleshooting  Photocond uctor Un it  HO USING ASSY-GUIDE AD  FUSER AS SY  PWBA MCU  LV/HVPS Step Check Yes No 1 Check of external n oise Are there any other elect ri c[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 239 3.3.3.2 Controller related error FIP-C1  Panel Mess age  Possible parts that caused the err or  PWBA ESS  Trou blesh ooti ng CHE CK P O I N T Since a controller-related service ca ll error may occur due to the print data structure sent by the h[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 240 FIP-C2  Panel Mess age  Possible parts that caused the err or  Troubleshooting FIP-C3  Panel Message  Possible parts that cause d the error  Trou blesh ooti ng  Servi ce Req C0999  Serv ice Req C11 21  Servi ce Req C1002  Serv[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING FIP accord ing to t he printe r messag e 241 FIP-C4  Panel Mess age  Possible parts that caused the err or  PWBA ESS  Troubleshooting FIP-C5  Panel Message  Serv ice Req C2000  Possible parts that cause d the error  PWBA ESS  Trou blesh ooti ng  Servi ce Req C1200  Se[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING Pri nting Quali ty-related Trouble 242 3.4 Printing Quality-related Trouble 3.4.1 Pri nting-quality tro ubleshootin g Entry Chart Figur e 3-4. Printi ng-quali ty troubles hooting Entry Cha rt NOTE: The printing-quality tro u bleshooting descr ib ed here is based on a condition that the printer con tr[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING Pri nting Quali ty-related Trouble 243 NOTE: When hor izontal strip es and spots appear at fixed in terva ls, it is highl y possible that a specific ro ll has caused the trouble. If this happens, you might be a ble to easi ly solve the problem b y measur ing the inte rval between the str ipes or spot[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING Pri nting Quali ty-related Trouble 244 3.4.2 Prin ting quality-related FIP FIP-P1 Printi ng is Faint (Weak Tones) Before star ting troubleshooting, inspect the feed path of the printer pap er. Check the paper feed p ath for metal st aples, paper clips , paper scraps , and other f oreign matter.  P[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING Pri nting Quali ty-related Trouble 245 11 Check after re placement of th e MOT ASSY MAG Replace MOT ASSY MAG. (p.396) Make a te st print o f the probl em image. Is the ima ge printed n ormally? End of proced ure Go to S te p [ 1 2] . 12 Check of imag e prim ary transfer pro cess Is the toner image on[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING Pri nting Quali ty-related Trouble 246 FIP-P2 Blank Pri nt Before star ting troubleshooting, inspect the feed path of the printer pap er. Check the paper feed p ath for metal st aples, paper clips , paper scraps , and other f oreign matter.  Problems Completely b lank pages ar e printed.  ESS a[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING Pri nting Quali ty-related Trouble 247 12 Check of imag e prim ary transfer pro cess Is the toner image on the drum trans f erred normally to IBT BELT? Execute a test print , turn the p ower OFF when you thi nk that th e prima r y transfe r process is in prog ress durin g printin g, and c heck the to[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING Pri nting Quali ty-related Trouble 248 FIP-P3 Sol id Black Prin t Before star ting troubleshooting, inspect the feed path of the printer pap er. Check the paper feed p ath for metal st aples, paper clips , paper scraps , and other f oreign matter.  Problems Completely b lack pages are prin ted. ?[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING Pri nting Quali ty-related Trouble 249 FIP-P4 Vertical White Bands or Lines Before star ting troubleshooting, inspect the feed path of the printer pap er. Check the paper feed p ath for metal st aples, paper clips , paper scraps , and other f oreign matter.  Problems Vertical (along the paper feed[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING Pri nting Quali ty-related Trouble 250 FIP-P5 Horizont al White Bands o r Lines Before star ting troubleshooting, inspect the feed path of the printer pap er. Check the paper feed p ath for metal st aples, paper clips , paper scraps , and other f oreign matter.  Problems Horizontal (vertical to th[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING Pri nting Quali ty-related Trouble 251 10 Check of imag e secondary tra nsfer process Is the toner image on IBT BELT transferred normally to the pap er? Execute a test print , turn the p ower OFF when you think th at th e i mage transfer proces s is in progress durin g printi ng, and c heck th e pape[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING Pri nting Quali ty-related Trouble 252 FIP-P6 Vert ical Black Lines Before star ting troubleshooting, inspect the feed path of the printer pap er. Check the paper feed p ath for metal st aples, paper clips , paper scraps , and other f oreign matter.  Problems Vertical (along the paper f eed direct[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING Pri nting Quali ty-related Trouble 253 FIP-P7 Ho rizontal Black Lines Before star ting troubleshooting, inspect the feed path of the printer pap er. Check the paper feed p ath for metal st aples, paper clips , paper scraps , and other f oreign matter.  Problems Horizontal (vertical to the paper fe[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING Pri nting Quali ty-related Trouble 254 FIP-P8 Image is Partia lly Not Pri nted Before star ting troubleshooting, inspect the feed path of the printer pap er. Check the paper feed p ath for metal st aples, paper clips , paper scraps , and other f oreign matter.  Problems Some areas of the printed i[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING Pri nting Quali ty-related Trouble 255 FIP-P9 Toner Smudges Before star ting troubleshooting, inspect the feed path of the printer pap er. Check the paper feed p ath for metal st aples, paper clips , paper scraps , and other f oreign matter.  Problems Toner smudges appear rando mly ov er the entir[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING Pri nting Quali ty-related Trouble 256 FIP-P10 Resi dual Image Before star ting troubleshooting, inspect the feed path of the printer pap er. Check the paper feed p ath for metal st aples, paper clips , paper scraps , and other f oreign matter.  Problems A ghost image appears on the printout. An i[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING Pri nting Quali ty-related Trouble 257 FIP-P11 Dark or Di rty Background Before star ting troubleshooting, inspect the feed path of the printer pap er. Check the paper feed p ath for metal st aples, paper clips , paper scraps , and other f oreign matter.  Problems The en tire page or pa rt of th e[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING Pri nting Quali ty-related Trouble 258 FIP-P12 Skew Print Before star ting troubleshooting, inspect the feed path of the printer pap er. Check the paper feed p ath for metal st aples, paper clips , paper scraps , and other f oreign matter.  Problems The printed image is no t parallel to bo th side[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING Pri nting Quali ty-related Trouble 259 FIP-P13 Pri nt Paper Damage Before star ting troubleshooting, inspect the feed path of the printer pap er. Check the paper feed p ath for metal st aples, paper clips , paper scraps , and other f oreign matter.  Problems Is the prin ted out paper wrinkled, fol[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING Pri nting Quali ty-related Trouble 260 FIP-P14 Image Not Fixed Before star ting troubleshooting, inspect the feed path of the printer pap er. Check the paper feed p ath for metal st aples, paper clips , paper scraps , and other f oreign matter.  Problems The printed image is no t sufficiently fixe[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING Pri nting Quali ty-related Trouble 261 FIP-P15 Col or Shi ft Before star ting troubleshooting, inspect the feed path of the printer pap er. Check the paper feed p ath for metal st aples, paper clips , paper scraps , and other f oreign matter.  Problems The printed Yellow or B lack im age does not [...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING Pri nting Quali ty-related Trouble 262 FIP-P16 Uneve n Dens ity/Thin- Spot Before star ting troubleshooting, inspect the feed path of the printer pap er. Check the paper feed p ath for metal st aples, paper clips , paper scraps , and other f oreign matter.  Connecting locatio n of the connecto rs [...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING Pri nting Quali ty-related Trouble 263 FIP-P17 Enti rely Faint Before star ting troubleshooting, inspect the feed path of the printer pap er. Check the paper feed p ath for metal st aples, paper clips , paper scraps , and other f oreign matter.  Connecting locatio n of the connecto rs  Problems[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING Pri nting Quali ty-related Trouble 264 FIP-P18 Entirely Fogge d in Black Before star ting troubleshooting, inspect the feed path of the printer pap er. Check the paper feed p ath for metal st aples, paper clips , paper scraps , and other f oreign matter.  Connecting locatio n of the connecto rs ?[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING Pri nting Quali ty-related Trouble 265 FIP-P19 Enti rely Thin Before star ting troubleshooting, inspect the feed path of the printer pap er. Check the paper feed p ath for metal st aples, paper clips , paper scraps , and other f oreign matter.  Connecting locatio n of the connecto rs  Problems [...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING Pri nting Quali ty-related Trouble 266 FIP-P20 Uneven Dens ity in Horizontal Directio n Before star ting troubleshooting, inspect the feed path of the printer pap er. Check the paper feed p ath for metal st aples, paper clips , paper scraps , and other f oreign matter.  Connecting locatio n of the[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING Abnormal Noise-rela ted Trou ble 267 3.5 Abnormal Noise-r elated Trouble 3.5.1 Abnormal noise-rel ated troubles hooting entry chart Can you hear abnormal noise during initialization after power ON? Can you hear abnormal noise in the Standby mode? Can you hear abnormal noise during printing (one-side)[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING Abnormal Noise-rela ted Trou ble 268 3.5.2 Abnormal Noise-related FI P FIP-N1 At Powe r On  Possible parts that caused the err or  Troubleshooting  MOT ASSY ROT  FRAME ASSY-ROTARY  MOT ASSY MICRO  2ND B TR ASSY  Photocond uctor Un it  MO T ASSY P/R  FRAME ASSY-PH  ROLL M[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING Abnormal Noise-rela ted Trou ble 269 FIP-N2 At St andby  Possible parts that caused the err or  Troubleshooting  MOT ASY FSR  FUSE R ASSY  2ND BTR ASSY Step Check Yes No 1 Is abnormal no ise being generate d from MOT ASSY FSR? (It rota tes when the temperatur e of FUSER ASSY reac hes t[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING Abnormal Noise-rela ted Trou ble 270 FIP-N3 At Pri nting (One Side)  Possible parts that caused the err or  Troubleshooting  500 FEEDER ASSY OPTION  F RAME AS SY-PH  ROLL MSI  MOT ASY FSR  FUSER AS SY  2 ND BTR ASSY  MOT ASSY P/R  Photoconductor U nit  MOT ASSY MAG ?[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING Abnormal Noise-rela ted Trou ble 271 17 Is abno rmal noise being ge nerated by M OT ASSY ROT? Re place MOT ASSY ROT. Go t o S t ep [ 18 ]. 18 Is abnormal no ise being gen erate d by FRAME ASSY-ROTARY that is driven by MOT ASSY ROT? Replace FRAME ASSY - ROTARY. Go t o S t ep [ 19 ]. 19 Is abno rmal no[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING Abnormal Noise-rela ted Trou ble 272 FIP-N4 At Pri nting (Bot h Sides)  Possible parts that caused the err or  Troubleshooting  500 FEEDER ASSY OPTION  F RAME AS SY-PH  ROLL MSI  MOT ASY FSR  FUSER AS SY  2 ND BTR ASSY  MOT ASSY P/R  Photoconductor U nit  MOT ASSY MAG[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING Abnormal Noise-rela ted Trou ble 273 16 Is abnormal no ise being generate d from HOUSING ASS Y-DEVE K, HO USING ASSY-DEVE Y, HOUSING ASSY-DEVE M, or HOUSING ASSY-DEVE C that are dri ve n by MOT ASSY MAG? Repl ace HOUS ING ASSY -DEV E K , HOUS ING ASSY -DEV E Y , HOUS ING ASSY -DEVE M, or HOUSI NG ASS[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING Test Print 2 74 3.6 Test Print 3.6.1 Overvi ew To check th e IOT op era tion, it i s pos sible to pr in t PWBA MCU buil t-in sa mple continu ously witho ut bei ng routed t hrough the control ler. I f the pro blem does not occur on the PWBA MCU built-in sampl e, the cause of the problem may be control[...]

EPSON AcuLaser C110 0 Revision B TROUBLESHOOTING Test Print 2 75 Figure 3-6. Test Print Pattern 400 dot line (400dpi) 1 dot line 127 dot 508 dot (400dpi)[...]

CHAPTER 4 DISASSEMBLY AND ASSEMBLY[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY Overview 277 4.1 Overview This secti on descri bes procedu res for disassembl ing the main component s of the product . Unless ot herwise speci fied, disas sembled units or components can be reassembled by reversing the d isassembly p rocedure. Procedures which, if not strictly observed, cou[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY Overview 278 W ARNI NG  Be careful not to let the developer or toner get into your eye or mouth, an d not to inha le it. And also ca re should be ta ken for people around you to prevent them from th e same thing. (Spread a sheet of paper inside and around the printer to prevent soiling.) [...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY Overview 279 4.1.2 Before you s tart work This chapter describes the pr ocedu res for re movin g and attaching the main parts of the printer with the printer br oken down into 12 main com ponents accord ing to the parts list.  Turn the prin ter OFF, and disconnect th e power cord bef ore [...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY Overview 280 4.1.3 List of Screws Many t ypes of screw s are us ed on this pr i nter . D o not m i stake n ly attach them at the wron g po sitions. Pay special attention when handling screws for plastic and screws for metal plates. If you mix up these screws, screw holes will be damaged. Scr[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY Overview 281 4.1.4 Too ls Use only specified to ols to avo id damagi ng the p rinter. 6 For metal plat e Scr e w Silver Meta l plate • Silver colored • Unifo rm screw di ameter 7 For metal plat e Scr e w Si lv er w ith external toothe d washer Meta l plate • Silver colored • With ext[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY Overview 282 4.1.5 Conventions use d in descript ions of proc edures  Express ions relating to directi ons in pr ocedures are d efined as follows :  FRONT : Front d irectio n facing the front side of the printer  REAR : Rear direction f acing the front s ide of the printer  LEFT [...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY COVER 283 4.2 COVER 4.2.1 COVE R ASSY TO P REMOVAL 1. Remove COVER ASSY RH. (p.301) 2. Rem ove th e 2 E-ri ng s fast ening CO VER A SSY TOP t o t h e mai n unit. 3. Open COVER ASSY TOP and si de it to th e right to remove it. REINSTALLAT ION 1. Attach COVER ASSY TOP to the printer with the C[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY COVER 284 4.2.2 TRAY EXTENSION , COVER TRAY REMOVAL 1. Draw out COVER TRA Y until it comes to a stop. 2. Open COVER ASSY TOP. 3. Un hook th e hook fasten ing C O VER TR AY to CO VER A SSY TOP , and re m ove COVER TRAY together with TRAY EXTENSION. 4. Open TRAY EXTENSION. 5. Bend the TRAY EXT[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY COVER 285 4.2.3 COVER FUSER REMOVAL 1. Open COVER FUSER. 2. Draw out the COVER RH boss from the hole on COVER FUS ER while pushing COVER RH outward, a nd remov e COVER FUS ER. REINSTALLAT ION 1. With COVER FUS ER opened, insert the hole on the left side of CO VER FUSER into the COVER LH boss[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY COVER 286 4.2.4 COVE R TOP SIDE L REMOVAL 1. In the case of the DUPLEX s pecification, open DUPLEX ASSY. 2. In the case o f the standard s p ecification, open COVER FUSER. (p.285) 3. Open COVER ASSY TOP. 4. Loosen the screw (silver, with flange, 8 mm) fastening COVER TOP SIDE L to the main u[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY COVER 287 4.2.5 COVE R TOP SIDE R REMOVAL 1. In the case of the DUPLEX s pecification, open DUPLEX ASSY. 2. In the case o f the standard s p ecification, open COVER FUSER. (p.285) 3. Open COVER ASSY TOP. 4. Remove the screw (silver, with flange, 8 mm) fastening CO VER TOP SIDE R to the main [...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY COVER 288 4.2.6 SWIT CH ASSY TOP REMOVAL 1. Remove COVER ASSY RH. (p.301) 2. Unclamp the two clamps fastening th e ha rness of SWITCH A SSY TO P, and remove the harness. 3. Disc onnect conn ector (P/J11 6, blue) o f SWITCH A SSY TOP. 4. Remove the screw (silver, with flange, 8 mm) fastening [...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY COVER 289 4.2.7 SWIT CH ASSY FRONT REMOVAL 1. Remove COVER ASSY RH. (p.301) 2. Unclamp the clamp f astenin g the h arne ss of SWITCH ASSY FRO NT and remove the harness. 3. Remove the screw (silver, with flange, 8 mm) fastening SWITCH ASS Y FRONT to the m ain unit. 4. Remove SWITCH ASSY FRONT[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY COVER 290 4.2.8 COVER RH, SLIDE BAR, COVER ROS WIND OW REMOVAL 1. Remove COVER ASSY RH. (p.301) 2. Unhook the four hooks fastening GUIDE BAR to COVER RH, an d remove GUIDE BAR. 3. Remove the screw (silver, with flange, tapping, 8 mm) fastening COVER ROS WINDOW to SLIDE BAR. 4. Slide COVE R R[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY COVER 291 4.2.9 COVE R MSI REMOVAL 1. Remove COVER ASSY RH. (p.301) 2. Slide COVER MSI in a slightl y open state to th e right to remove from the main unit. REINSTALLAT ION 1. Match the hole on COVER MSI with the boss on the main unit with COVER MSI in a slightly op en state, and slid e COVE[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY COVER 292 4.2.10 COV ER FRONT L , COVER FRO NT ASSY U REMOVAL 1. Remove COVER ASSY RH. (p.301) 2. Remove COVER ASSY LH. (p. 295) 3. Rem ove C OVER M S I. (p.291) 4. Rem ove th e 3 sc rews (s ilv e r, wit h fla n ge, 8 mm) fa s teni ng COV ER FR ONT L to the main unit. 5. Sli de COVER FR ONT [...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY COVER 293 REINSTALLAT ION 1. Match the boss on COVER FRONT ASS Y U with the holes on COVER FR ONT L while bending down COVER FRONT ASSY U, an d attach COV ER FRONT ASSY U to COVER FRONT L. 2. Match the two hooks on the rear of COV ER FRONT L with the holes on the main unit, and attach COVER [...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY COVER 294 4.2.11 OP PANEL (CON TROL, PANEL ) REMOVAL 1. Open COVER ASSY TOP. 2. Open COVER FRONT ASSY U. 3. Remove the 3 screws (silver, with flange, 6 m m) fastening OP PANEL to th e main unit. 4. Rem ove th e protr usio ns on the left and rig ht of OP PA NEL fr om COV ER RH an d COVER LH w[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY COVER 295 4.2.12 COV ER ASSY LH REMOVAL 1. In the case of the DUPLEX s pecification, remove DUPLEX ASSY. ( p.412) 2. In the case o f the standard s p ecification, remove COVER FUSER. (p.285) 3. Rem ove OP PANE L. (p.294) 4. Open COVER MSI. 5. Rem ove C O VER ESS . (p.297) 6. Rem ove t h e 4 [...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY COVER 296 REINSTALLAT ION 1. Match the squar e hole on the rear side of COVER ASSY LH with the interface connector on the rear side of the main unit. 2. Match the 4 hooks on the rear side of COVER ASS Y LH with t he holes on the main u nit w hi le ins ert i ng the protru sion on the fr ont s[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY COVER 297 4.2.13 COV ER ESS REMOVAL 1. Loosen the screw fastening COVER ESS to the main unit. 2. Remove COVER ESS fro m the main unit. REINSTALLAT ION 1. Match the two p rotrusion s on t he botto m side of COVER ES S with t he holes on COVER LH, and attach COVER ESS. 2. Fasten COVER ESS to t[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY COVER 298 4.2.14 SWITCH ASSY FUSER, SW ITCH-FUSER DOOR REMOVAL 1. Remove COVER ASSY LH. (p. 295) 2. Unclamp the clamp fastening the harnes s of SWITCH ASSY FUS ER and remove the harness. 3. Remove the screw (silver, with flange, 8 mm) fastening SWITCH ASS Y FUSER to the m ain unit. 4. Remove[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY COVER 299 4.2.15 COV ER INN ER TOP REMOVAL 1. Rem ove OP PANE L. (p.294) 2. Rem ove th e 2 sc rews (s ilv e r, wit h fla n ge, 6 mm) fas teni ng COV ER IN NER TO P to the m ain unit. 3. Remove COVER INNER TOP from the main unit. REINSTALLAT ION 1. Match the hol e on COVER INN ER TOP with the[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY COVER 300 4.2.16 SW ITCH-FRONT DOOR, SWIT CH-INLK FRONT REMOVAL 1. Remove COVER ASSY RH. (p.301) 2. Remove SWITCH ASSY FRONT. (p. 289) 3. Remove the screw (gold, 8 mm) fastening SWITCH-INLK FRONT to BRACKET INLK FRONT. 4. Remove SWITCH-INLK FRONT from BRACKET INLK FRONT. 5. Unhook the two ho[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY COVER 301 4.2.17 COV ER ASSY RH REMOVAL 1. In the case of the DUPLEX s pecification, remove DUPLEX ASSY. ( p.412) 2. In the case o f the standard s p ecification, remove COVER FUSER. (p.285) 3. Rem ove OP PANE L. (p.294) 4. Open COVER MSI. 5. Remove the 4 screws (silver, with flange, 8mm) fa[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY COVER 302 4.2.18 COV ER INN ER L REMOVAL 1. Remove COVER ASSY RH. (p.301) 2. Remove COVER ASSY LH. (p. 295) 3. Rem ove C OVER M S I. (p.291) 4. Remove COVER FRONT L and COVER FRONT ASS Y U. (p.292) 5. Rem ove t h e 2 sc rews (s ilv e r, wit h fla nge, 8 mm) fa ste ni ng CO V ER I NNER L to t[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY COVER 303 4.2.19 SW ITCH-INL K FUSE R REMOVAL 1. Remove COVER ASSY LH. (p. 295) 2. Remo ve SWIT CH ASSY FUSE R. (p.298) 3. Remove the screw (silver, 8 mm) fastening SWITCH-INLK FUSE R to BRACKET INLK FUSER. 4. Rem o ve SWI T CH-INL K FUS ER fro m BRACK E T INLK FUS ER. REINSTALLAT ION 1. Mat[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY MSI 304 4.3 MSI 4.3.1 MSI ASSY REMOVAL 1. Remove COVER ASSY RH. (p.301) 2. Remove COVER ASSY LH. (p. 295) 3. Rem ove C OVER M S I. (p.291) 4. Remove COVER FRONT L and COVER FRONT ASS Y U. (p.292) 5. Remove FRAME ASSY-PH. (p.3 27) 6. Disconn ect connect or (P/J40 8) and connecto r (P/J409) fr[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY MSI 305 REINSTALLAT ION 1. Gently insert HARNESS-ASS Y P/H 1 alon g the lef t side of MS I ASSY toget her with MSI ASSY from the front of the main unit. 2. Insert MSI ASSY about halfway with the front of MSI ASSY lifted slightly to avoid TI E PLATE under the main unit , and then br ing out t[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY MSI 306 4.3.2 ROLL ASSY MSI REMOVAL 1. Remove COVER ASSY RH. (p.301) 2. Remove COVER ASSY LH. (p. 295) 3. Rem ove C OVER M S I. (p.291) 4. Remove COVER FRONT L and COVER FRONT ASS Y U. (p.292) 5. Remove FRAME ASSY-PH. (p.3 27) 6. Rem ove MS I ASSY . (p. 304) 7. Rem ove S OLEN OID P ICK UP . [...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY MSI 307 REINSTALLAT ION 1. Insert the left side of the shaft on ROLL ASSY MSI into the left-side bearing of MSI ASSY, and then slide ROLL ASSY M SI to the right and attach ROLL ASSY MSI. 2. Match the notch of left and right BEA RING MSI on ROLL ASSY MSI w ith the positioning pin of SHAFT ASS[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY MSI 308 4.3.3 ROL L MSI REMOVAL 1. Remove FRAME ASSY-PH. (p.3 27) 2. Unhoo k th e hook on t he righ t-side C ORE fasteni ng SH AF T ASS Y MS I, and s lid e to the rig ht. 3. Slide ROLL MSI to the right, and draw out the attachment groove of ROLL MSI from the pin of SHAFT ASSY MSI to remove R[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY MSI 309 4.3.4 CHUTE MSI REMOVAL 1. Remove FRAME ASSY-PH. (p.3 27) 2. Bend down CHU TE MSI, and d raw out the ri ght-si de boss o n CHUTE MSI from the right- side hole o n MSI ASSY to remo ve CHUTE MS I. REINSTALLAT ION 1. Insert the left-side boss on CHUTE MSI into the left-side hole of MSI [...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY MSI 310 4.3.5 GUI DE SIDE L, G UIDE A SSY SIDE R REMOVAL 1. Open COVER MSI. 2. Unhook the hoo ks fastening the ho les at the center of GUIDE SIDE COVER an d the hooks at the left and right of GUIDE SIDE COV ER from the holes on FRAME ASSY BOTTO M, and remove GUI DE SIDE COVER. 3. Remove GEAR[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY MSI 311 4.3.6 PLATE BOTTOM ASSY MSI REMOVAL 1. Remove COVER ASSY RH. (p.301) 2. Remove COVER ASSY LH. (p. 295) 3. Rem ove C OVER M S I. (p.291) 4. Remove COVER FRONT L and COVER FRONT ASS Y U. (p.292) 5. Remove FRAME ASSY-PH. (p.3 27) 6. Rem ove MS I ASSY . (p. 304) 7. Rem ove S OLEN OID P I[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY MSI 312 REINSTALLAT ION 1. Match the left side of PLATE BOTTOM ASSY MSI with th e attachment position on the lef t side of MS I ASSY, and insert the r ight side o f PLATE BOT TOM ASSY MSI from the notch on the right s ide of MSI ASS Y. 2. Insert the left and right holes of PLATE BOTTOM ASSY [...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY MSI 313 4.3.7 HOLDER ASSY RETARD M SI REMOVAL 1. Remove FRAME ASSY-PH. (p.3 27) 2. Rem ove C HUTE M SI. (p.309) 3. Un hook th e hook s of the PAPER G U IDEs on the l e ft an d right s ides faste n ed to SHAFT ASSY MSI, slide each PAPER GUIDE to the outside, an d remove CHUTE ASSY PAPE R GUID[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY MSI 314 REINSTALLAT ION 1. Match SPRING RETARD MSI attached to HOLDER ASSY RETARD MSI with the sp ring bearing of FR AME ASSY BOTTO M, and attach the bosses o n both sides of HOLDER ASSY RETARD MSI to FRAME ASSY BOTTOM while bendin g down the bosses. 2. Attach ROLL MSI. (p.308 ) 3. Slide eac[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY MSI 315 4.3.8 PLATE ASSY RETARD REMOVAL 1. Remove FRAME ASSY-PH. (p.3 27) 2. Rem ove C HUTE M SI. (p.309) 3. Rem ove R OLL M S I . (p.308) 4. Remove HOLDER ASSY RETARD MSI. (p.313 ) Bend down PLATE ASSY RETARD, remove the holes on the left and right from the boss o n FRAME ASSY BOTTOM, and r[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY MSI 316 REINSTALLAT ION 1. Match the lef t and right U gro oves of PLATE AS SY RETAR D with the boss es on the front of FRAME ASSY BOTTOM. 2. Turn the bo sses aligned with th e U-grooves as the fulcr um while bend ing down PLATE ASSY RETARD, insert the bosses on the rear side of FRAME ASSY B[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY MSI 317 4.3.9 OIL DA MPER REMOVAL 1. Remove COVER ASSY RH. (p.301) 2. Remove COVER ASSY LH. (p. 295) 3. Rem ove C OVER M S I. (p.291) 4. Remove COVER FRONT L and COVER FRONT ASS Y U. (p.292) 5. Remove FRAME ASSY-PH. (p.3 27) 6. Rem ove MS I ASSY . (p. 304) 7. Unhook the hook on GEAR PICK UP [...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY MSI 318 REINSTALLAT ION 1. Match the hole on OIL DAMPE R with t he boss on DAMPER BR ACKET, and attach OIL DAMPER to DAMPER BRACKET. 2. Match the hole on DAMPER BRACKET with th e boss on MSI ASSY, an d attach OIL DAMPER together with DAMPER BRAC KET. 3. Fasten DAMPER BR ACKET to MSI ASSY wi [...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY MSI 319 4.3.10 SO LENOID P ICK UP REMOVAL 1. Remove COVER ASSY RH. (p.301) 2. Remove COVER ASSY LH. (p. 295) 3. Rem ove C OVER M S I. (p.291) 4. Remove COVER FRONT L and COVER FRONT ASS Y U. (p.292) 5. Remove FRAME ASSY-PH. (p.3 27) 6. Rem ove MS I ASSY . (p. 304) 7. Unhook the hook on GEAR [...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY MSI 320 REINSTALLAT ION 1. Match the hole on SOLENOID PICK UP with the boss o n MSI ASSY, and attach SOLENOID PICK UP. 2. Fasten SOLENOID PICK UP to MSI ASSY with the screw (silver, tapping, 8mm). 3. Connect connector (P/J6 05) to SOLENOID PICK UP, and route the harness in the notch an d gro[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY MSI 321 4.3.11 SE NSOR PAPE R EMPTY REMOVAL 1. Remove COVER ASSY RH. (p.301) 2. Remove COVER ASSY LH. (p. 295) 3. Rem ove C OVER M S I. (p.291) 4. Remove COVER FRONT L and COVER FRONT ASS Y U. (p.292) 5. Remove FRAME ASSY-PH. (p.3 27) 6. Rem ove MS I ASSY . (p. 304) 7. Unhook the thr ee hook[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY MSI 322 4.3.12 ACT UATOR EMPT Y REMOVAL 1. Remove COVER ASSY RH. (p.301) 2. Remove COVER ASSY LH. (p. 295) 3. Rem ove C OVER M S I. (p.291) 4. Remove COVER FRONT L and COVER FRONT ASS Y U. (p.292) 5. Remove FRAME ASSY-PH. (p.3 27) 6. Rem ove MS I ASSY . (p. 304) 7. Remove GUIDE SIDE L and GU[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY MSI 323 REINSTALLAT ION 1. Slide the actuator of ACTUATOR EMPTY into the clearan ce of MSI ASSY, slide the shaft on ACTUATOR EMPTY along the notch on MSI ASSY, and attach ACTUATOR EMPTY. 2. Insert the right-side shaft of ACTUATOR EMPTY into the hole on MSI ASSY, and fasten t he groove on the[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY PH ASSY 324 4.4 PH ASSY 4.4.1 COVER-PH REMOVAL 1. Open COVER-PH. 2. Un hook th e hook s on bo th the l eft and righ t si des faste ni ng COV ER- PH to CHUTE ASS Y-REAR, an d remove COVER- PH. REINSTALLAT ION 1. Match the two hook s unde r COVER-P H with CHUTE A SSY-REAR , attach COVER-PH , a[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY PH ASSY 325 4.4.2 CHUTE ASSY-REAR REMOVAL 1. In the case of the DUPLEX s pecification, remove DUPLEX ASSY. ( p.412) 2. In the case o f the standard specif ication, remove COVER-PH. ( p.324) 3. Open CHUTE ASSY-REAR. 4. Bend the attachmen t section on the right side of CHUTE ASSY-REAR with a s[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY PH ASSY 326 4.4.3 CHUTE-REAR UP, CHUTE-REAR LOW REMOVAL 1. Remove CHUTE AS SY-REAR. (p.325) 2. Remove the 2 screws (silver, with flange, tapping, 8 mm) fastening CHUTE- REAR LOW to CH UTE-R E AR UP. 3. Remov e the concave portion on CHUTE- REAR LOW fr om the pro trusion on CHUTE-REAR UP, and[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY PH ASSY 327 4.4.4 FRAME ASSY-PH REMOVAL 1. In the case of the DUPLEX s pecification, remove DUPLEX ASSY. ( p.412) 2. In the case o f the standard specif ication, remove COVER-PH. ( p.324) 3. Open CHUTE ASSY-REAR. 4. Rem ove th e 4 sc rews (s ilve r, wit h flan ge, 8 mm) fas teni ng FRA M E A[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY PH ASSY 328 REINSTALLAT ION 1. Attach CHUTE ASSY-REAR. (p.325) 2. Turn FRAME ASSY-PH 90° in the d irection of the arrow, and conn ect connector (P/J603) and con nector (P/J604) connected to the main unit. 3. Open CHUTE ASSY-REAR. 4. While pushing down the film part of the HOLDER ASSY RETARD[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY PH ASSY 329 4.4.5 CLUTCH ASSY REGI REMOVAL 1. Remove FRAME ASSY-PH. (p.3 27) 2. Rem ove MOT OR-PH . (p.337) 3. Rem o ve DRI VE ASSY- PH. (p.340) 4. Disconnect the con nector (P/J203) fro m CLUT CH ASSY R EGI, and r emove th e harness of CLUTCH ASSY REGI from the groove on FRAME ASSY-PH. 5. R[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY PH ASSY 330 4.4.6 ROL L-REGI ME TAL REMOVAL 1. Remove FRAME ASSY-PH. (p.3 27) 2. Rem ove MOT OR-PH . (p.337) 3. Rem o ve DRI VE ASSY- PH. (p.340) 4. Remo ve CLUTCH AS SY REGI. (p.329) 5. Remove the two E-rings f astening GEAR-REGI from FRAME ASSY- PH, and remove the two GEAR-REGIs. 6. Rem ov[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY PH ASSY 331 4.4.7 ROLL REGI RUBBER REMOVAL 1. Remove FRAME ASSY-PH. (p.3 27) 2. Rem ove MOT OR-PH . (p.337) 3. Rem o ve DRI VE ASSY- PH. (p.340) 4. Remo ve CLUTCH AS SY REGI. (p.329) 5. Remov e the E- ring fasten ing GEAR -REGI on ROLL REGI R UBBER fr om FRAME ASSY-PH, and remove GEAR-REGI. [...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY PH ASSY 332 REINSTALLAT ION 1. Insert the shaft left side on ROLL REGI RUBBER into the left-side bearing on FRAME ASSY-PH, and slide ROLL REGI RU BBER to the right to attach. 2. Fas ten ROLL REGI RU BBER to FRAME AS SY-PH b y the le ft and r ight BEARING RUBBER. 3. Attach SPRING-REGI R (META[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY PH ASSY 333 4.4.8 ROLL ASSY-PRE REGI REMOVAL 1. Remove FRAME ASSY-PH. (p.3 27) 2. Rem ove MOT OR-PH . (p.337) 3. Rem o ve DRI VE ASSY- PH. (p.340) 4. Remove CLUTCH ASSY PRE REGI. (p.338) 5. Remov e the E-rings fastening the right s ide of the s haft on ROLL ASSY-PRE REGI from FRAME ASSY-PH. [...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY PH ASSY 334 4.4.9 SENSOR O HP REMOVAL 1. Remove FRAME ASSY-PH. (p.3 27) 2. Remove the screw (silver, with flange, tapping, 8 mm) fastening BRACKET- SENSOR OHP to FRAME ASSY -PH. 3. Remove BRACKET-SENSOR OHP together with SENS OR OHP from FRAME ASSY-PH. 4. Disc onnect connect or (P/J10 1) fro[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY PH ASSY 335 4.4.10 ACT UATOR-REGI REMOVAL 1. Remove FRAME ASSY-PH. (p.3 27) 2. Remov e the left-s ide shaft on ACTUATOR-R EGI from th e hook on F RAME ASSY-PH. 3. Draw out the right -side shaf t on ACTUAT OR-REGI from the hol e on FRAM E ASSY-PH, and remove AC TUATOR-REG I together with SPRI[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY PH ASSY 336 4.4.11 SE NSOR REG I REMOVAL 1. Remove FRAME ASSY-PH. (p.3 27) 2. Rem ove MOT OR-PH . (p.337) 3. Rem o ve DRI VE ASSY- PH. (p.340) 4. Unhoo k the three ho oks f astenin g SENSOR RE GI to FRAME A SSY-P H, down ACTUATOR-R EGI with yo ur finger s press and remove SENSOR REGI. 5. Dis[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY PH ASSY 337 4.4.12 MOT OR-PH REMOVAL 1. Remove FRAME ASSY-PH. (p.3 27) 2. Unhook the two hooks fastening COVER-HARNESS to FRAME ASSY-PH, and remove COV ER- HAR N ESS . 3. Unclamp the clamp on DRIVE ASSY-PH, and remove the harness of MOTOR- PH from the groov e on FRAME A SSY- PH. 4. Rem ove t[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY PH ASSY 338 4.4.13 CL UTCH ASSY PRE REGI REMOVAL 1. Remove FRAME ASSY-PH. (p.3 27) 2. Rem ove MOT OR-PH . (p.337) 3. Rem o ve DRI VE ASSY- PH. (p.340) 4. Disconnect the con nector (P/J202) fro m CLUT CH ASSY R EGI, and r emove th e harness of CLUTCH ASSY REGI from the groove on FRAME ASSY-PH[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY PH ASSY 339 4.4.14 SW ITCH-PH DOOR REMOVAL 1. Remove FRAME ASSY-PH. (p.3 27) 2. Disconnect connector (P/J100) from SWITCH-PH DOOR . 3. Open CHUTE ASSY-REAR. 4. Unhook the two hooks fastening SWITCH-PH DOOR to FRAME ASSY-PH, an d remove SWITCH-PH DOOR. REINSTALLAT ION 1. Open CHUTE ASSY-REAR.[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY PH ASSY 340 4.4.15 DRIV E ASSY-PH REMOVAL 1. Remove FRAME ASSY-PH. (p.3 27) 2. Rem ove MOT OR-PH . (p.337) 3. Unclamp the clamp on DRIVE ASSY-PH, and remove the harness. 4. Remove the 2 screws (silver, with flange, tapping, 8 mm) fastening DRIVE ASSY-PH to FRAME ASSY-PH. 5. Remove DRIVE ASSY[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY TRANSFER 341 4.5 TRANSFE R 4.5.1 CHUTE ASSY-FSR, COVER ASSY-RR 2N D REMOVAL  CHUTE ASSY-FSR . 1. Open CHUTE ASSY-FSR. 2. Press t he hi ng e on CHUTE AS SY- FSR to th e inside with a flat-b lade screwdriver or a similar tool, and remove CHUTE ASSY-FSR from the main unit. 3. Disconnect the [...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY TRANSFER 342  COVE R ASSY -RR 2ND 1. Remove COVER ASSY LH. (p. 295) 2. Unclamp the clamp fastenin g the harnes s of COVER ASSY- RR 2N D, and remo ve the harness. 3. Disconn ect connector ( P/J621) co nnected to the main unit, and insert the connector inside through th e hole on the main u[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY TRANSFER 343 REINSTALLAT ION  COVE R ASSY -RR 2ND 1. Lead out the co nnector of the harn ess of COVER ASSY-RR 2ND from the hole on the main unit. 2. Match the boss on COVER ASSY-RR 2ND with the hole on the main unit, and attach COVER ASSY-RR 2ND. 3. Lead out the relay connector connected [...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY TRANSFER 344 4.5.2 SENSOR FUSE R IN REMOVAL 1. Remove C HUTE ASSY-FSR. (p.341) 2. Remove the 2 screws (silver, with washer, tapping, 8 mm) fastening DIODE FUSER to CHUTE ASSY-FSR . 3. Remove DIODE FUSER from CHUTE ASSY-FSR. 4. Remove the screw (silver, with washer, tapping, 8 mm) fastening C[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY TRANSFER 345 REINSTALLAT ION 1. Match the boss on SENSOR FUSER IN with the hole on CHUTE ASSY-FSR, and attach SENSOR FUSER IN. 2. Fasten SENSOR FUSER IN to CHUTE ASSY-FSR with the screw (silver, tappi ng, 6 mm ). 3. Conn ect connector (P/J111) t o SENSOR FUSER IN . 4. Insert the three protru[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY TRANSFER 346 4.5.3 FRAME ASSY-2ND REMOVAL 1. Remove COVER ASSY RH. (p.301) 2. Remove CHUTE ASSY-FSR and COVER ASSY-RR 2ND. (p.341) 3. Remove 2ND BTR ASSY. (p.348) 4. Rem ove P LATE B IA S-2ND ASSY. (p.358) 5. Remove CAM ASSY-2ND. (p.350) 6. Remov e SPR ING-2ND fas tening bo th the le ft and [...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY TRANSFER 347 REINSTALLAT ION 1. Attach BEARING-BRUSH C AM to the left-sid e bearing on the main unit. 2. Attach BEARING-BRUSH C AM to the right-sid e sh aft on FRAME ASSY-2ND. 3. Insert the right-side shaft on FRAME ASSY-2ND into the right-si de beari ng on the main unit , slide FRAME AS SY-[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY TRANSFER 348 4.5.4 2ND B TR ASSY REMOVAL 1. Open COVER ASSY TOP. 2. Remov e Phot oconduct or Unit. 3. Turn th e levers o n both the left and right sides of 2ND B TR ASSY towards yo u, and unlock the lever lock f rom FRAME ASSY-2ND. 4. Hold the lever on 2ND BT R ASSY, draw out t he right side[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY TRANSFER 349 REINSTALLAT ION 1. Insert the left-side gear on 2ND BTR ASSY into the main unit, and then fit the left and right bearings on 2ND BTR ASSY into FR AME ASSY -2ND to attach 2ND BTR ASSY. 2. Turn th e levers o n both the left and right sides of 2ND B TR ASSY down, and make FRAME ASS[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY TRANSFER 350 4.5.5 CAM ASSY-2ND REMOVAL 1. Remove COVER ASSY RH. (p.301) 2. Remove CHUTE ASSY-FSR and COVER ASSY-RR 2ND. (p.341) 3. Remove 2ND BTR ASSY. (p.348) 4. Rem ove P LATE B IA S-2ND ASSY. (p.358) 5. Remov e SENSOR 2BT R RETRACT. (p.356) 6. Remove the E-ring fastening the right-side s[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY TRANSFER 351 REINSTALLAT ION 1. Attach BEARING to the left-side bearing on the main unit. 2. Attach BEARING to the right-side bearing on CAM AS SY-2N D. 3. Insert the right-side bearing on CAM ASSY-2ND into the right-side bearing on the main unit, slide CAM ASSY -2ND to th e left, and attach[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY TRANSFER 352 4.5.6 SWIT CH 2BTR COVE R REMOVAL 1. Remove CHUTE ASSY-FSR and COVER ASSY-RR 2ND. (p.341) 2. Disconnect the con nector (P/J113) fro m SWITCH 2BTR COVER. 3. Remove the screw (silv er, tapping, 6 mm) fastening BR ACKET-SWITCH 2ND to COVER- RR 2ND. 4. Remove BRACKET-SWITCH 2ND from[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY TRANSFER 353 4.5.7 SENSOR ASSY AD C REMOVAL 1. Remove CHUTE ASSY-FSR and COVER ASSY-RR 2ND. (p.341) 2. Remove the 2 screws (silver, with washer, tapping, 8 mm) fastening SENSOR ASSY ADC to th e main unit. 3. Remove SENSOR ASSY ADC from the main unit. 4. Disc onnect connect or (P/J43 1) from [...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY TRANSFER 354 4.5.8 HO LDER -ADC 2ND REMOVAL 1. Remove COVER ASSY RH. (p.301) 2. Remove CHUTE ASSY-FSR and COVER ASSY-RR 2ND. (p.341) 3. Remove 2ND BTR ASSY. (p.348) 4. Rem ove P LATE B IAS - 2ND. (p.358) 5. Remov e SENSOR 2BT R RETRACT. (p.356) 6. Remove CAM ASSY-2ND. (p.350) 7. Remove SPRIN[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY TRANSFER 355 REINSTALLAT ION 1. Match the boss on SENSOR ASSY ADC with the hole on HOLDER-ADC 2ND, and attach SENSOR ASSY ADC. 2. Fasten SENSOR ASSY ADC to HOLDER-ADC 2ND with the 2 screws (silver, with washer, tapping, 8 mm). 3. Route t he harness in HOLDER-A DC 2ND, match the prot rusion o[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY TRANSFER 356 4.5.9 SENSOR 2BTR RETRACT REMOVAL 1. Remove CHUTE ASSY-FSR and COVER ASSY-RR 2ND. (p.341) 2. Disc onnect conn ector (P/J11 2) from SENSOR 2BTR RETRACT . 3. Remove the screw (silver, with flange, 8 mm) fastening BRAC KET-SEN SOR PHOTO to the main unit. 4. Remove BRACKET-SENSOR PH[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY TRANSFER 357 4.5.10 SE NSOR IBT R ETRACT REMOVAL 1. Rem ove OP PANE L. (p.294) 2. Remove COVER INNER TOP. (p.299) 3. Disc onnect connect or (P/J10 7) from SEN SOR IBT RETR ACT. 4. Remove the screw (silver, with flange, 6 mm) fastening BRAC KET-SEN SOR CLN to the main unit. 5. Remove BRACKET-[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY TRANSFER 358 4.5.11 PLATE BIAS-2ND A SSY REMOVAL 1. Remove COVER ASSY RH. (p.301) 2. Remove CHUTE ASSY-FSR and COVER ASSY-RR 2ND. (p.341) 3. Remove 2ND BTR ASSY. (p.348) 4. Remove the 2 screws (silver, with flange, tapping, 6 mm) fastening PLATE BIAS- 2ND ASSY to the main unit. 5. Unclamp th[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY TRANSFER 359 REINSTALLAT ION 1. Attach WIRE ASSY 2BTR to PLATE BIAS-2ND ASSY. 2. Fasten the terminal of WIRE ASSY 2BTR to PLATE BIAS-2 ND ASSY with the screw (silver, tapping, 6 mm). 3. Match the boss on PLATE BIAS-2ND ASSY with the hole on the main unit, and attach PLATE BI AS-2ND ASSY. 4. [...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY TRANSFER 360 4.5.12 CAM ASSY-IB T CL REMOVAL 1. Remove COVER ASSY RH. (p.301) 2. Remove COVER ASSY LH. (p. 295) 3. Rem ove OP PANE L. (p.294) 4. Remove COVER INNER TOP. (p.299) 5. Rem ove P WBA MC U . (p.404) 6. Remov e SENSOR IBT RETRACT. (p.357) 7. Remove the left and right E-rings fasteni[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY XERO 361 4.6 XERO 4.6.1 SENSOR T R-0 REMOVAL 1. Open COVER ASSY TOP. 2. Remov e Phot oconduct or Unit. 3. Remove the screw (silver, with flan ge, 10mm) fast ening SEN SOR TR-0 to PLATE-TR-0. 4. Remov e SENSOR TR-0 from PLATE-T R-0. 5. Disc onnect connect or (P/J10 8) from SENSOR TR-0 . REINS[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY XERO 362 4.6.2 GUIDE CRU A SSY D REMOVAL 1. Remove 2ND BTR ASSY. (p.348) 2. Remove COVER ASSY LH. (p. 295) 3. Rem ove P WBA MC U . (p.404) 4. R emove CHAS SIS AS SY ESS. (p.4 11) 5. Rem ove S ENSO R TR-0. (p.361) 6. Rem ove th e 2 scr e ws (s ilve r, with fl ang e , tapp ing, 6 m m) fa st en[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY XERO 363 8. Unclamp the clamp fas tening HARNESS-A SSY XERO on the left side of the main un it. 9. Remove the 5 screws (silver, with flange, tapping, 6 mm) fastening GUIDE CRU ASSY D to t he m ain un it. 10. Remove GUIDE CRU ASSY D from the main unit. REINSTALLAT ION 1. Insert HARNESS-ASSY X[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY XERO 364 4.6.3 LATC H ASSY D REMOVAL 1. Remove 2ND BTR ASSY. (p.348) 2. Remove COVER ASSY LH. (p. 295) 3. Rem ove P WBA MC U . (p.404) 4. R emove CHAS SIS AS SY ESS. (p.4 11) 5. Rem ove S ENSO R TR-0. (p.361) 6. Remove GUIDE CRU ASSY D. (p.362) 7. Rem ove ANT ENN A ASSY. (p.365 ) 8. Unhook S[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY XERO 365 4.6.4 ANTE NNA ASSY REMOVAL 1. Remove 2ND BTR ASSY. (p.348) 2. Remove COVER ASSY LH. (p. 295) 3. Rem ove P WBA MC U . (p.404) 4. R emove CHAS SIS AS SY ESS. (p.4 11) 5. Rem ove S ENSO R TR-0. (p.361) 6. Remove GUIDE CRU ASSY D. (p.362) 7. Unhook the hook fastening ARM-COUPLING to GU[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY XERO 366 REINSTALLAT ION 1. Connect connector (P/J109) to ANTENNA ASSY. 2. Match the boss on GUIDE CRU ASSY D with the hole on ANTENNA ASSY, attach ANTENNA ASSY, and fasten with a hook. 3. Attach SPRING-TORSION ARM to ARM- COUPLING, and insert the shaft on LINK-COUPLING into the long oblong [...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY XERO 367 4.6.5 GUIDE CRU A SSY AD REMOVAL 1. Remove COVER ASSY RH. (p.301) 2. Remove 2ND BTR ASSY. (p.348) 3. Remove FRAME ASSY-PH. (p.3 27) 4. Re move BC R CLN XE RO ASS Y. (p.373) 5. Rem ove S ENSO R TR-0. (p.361) 6. Rem ove th e 2 scr e ws (s ilve r, with fl ang e , tapp ing, 6 m m) fa st[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY XERO 368 8. Rem o ve WIRE ASSY BTR , WIRE ASS Y IBT a nd WIRE AS SY BCR fro m GUIDE CRU ASSY AD. 9. Remove the screw (silver, with flange, tapping, 6 mm) fastening WIRE ASS Y DTN to GUIDE CRU ASSY AD. 10. Remove WIRE ASSY DTN from GU IDE CRU ASSY AD. 11. Remove S PRING -LAT CH ho oked on to [...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY XERO 369 REINSTALLAT ION 1. Match the protrus ion and boss on GUIDE CRU ASSY AD with the hole on the main unit, and attach GUIDE CRU ASSY AD. 2. Fasten GUIDE CRU ASSY AD to the main unit with th e 7 screws (si lver, with flange, tapping, 6 mm). 3. Attach PLATE-ASSY GND to the main unit, and [...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY XERO 370 4.6.6 LEVE R-LATCH PR REMOVAL 1. Remove COVER ASSY RH. (p.301) 2. Remove 2ND BTR ASSY. (p.348) 3. Remove FRAME ASSY-PH. (p.3 27) 4. Re move BC R CLN XE RO ASS Y. (p.373) 5. Rem ove S ENSO R TR-0. (p.361) 6. Remove GUIDE CRU ASSY AD. (p.3 67) 7. Turn L EVER-LATCH P R in the dir ectio[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY XERO 371 4.6.7 CAP-PL ATE PR, PLA TE-ASSY PR REMOVAL 1. Remove COVER ASSY RH. (p.301) 2. Remove 2ND BTR ASSY. (p.348) 3. Remove FRAME ASSY-PH. (p.3 27) 4. Re move BC R CLN XE RO ASS Y. (p.373) 5. Rem ove S ENSO R TR-0. (p.361) 6. Remove GUIDE CRU ASSY AD. (p.3 67) 7. Remov e LEVER-LATCH PR. [...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY XERO 372 4.6.8 LATCH ASSY AD REMOVAL 1. Remove COVER ASSY RH. (p.301) 2. Remove 2ND BTR ASSY. (p.348) 3. Remove FRAME ASSY-PH. (p.3 27) 4. Re move BC R CLN XE RO ASS Y. (p.373) 5. Rem ove S ENSO R TR-0. (p.361) 6. Remove GUIDE CRU ASSY AD. (p.3 67) 7. Unhook SPRING-TORSION AD from the hook o[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY XERO 373 4.6.9 BCR CLN XERO ASSY REMOVAL 1. Remove COVER ASSY RH. (p.301) 2. Remove FRAME ASSY-PH. (p.3 27) 3. Dis connect conn ector (P/J 617) from BCR C LN XERO ASSY on th e right si de of the main unit. 4. Unclamp the clamp on the right si de of the main un it, and mov e the harness on BC[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY XERO 374 4.6.10 SE NSOR TNE R FULL REMOVAL 1. Remove FRAME ASSY-PH. (p.3 27) 2. Disc onnect connect or (P/J12 6) from SENSOR TNER F ULL. 3. Unhook the two hooks fastening SENSOR TNER FULL to the main unit, and remove SENSOR TNER FULL. REINSTALLAT ION 1. Match the hook on SENSOR TNER FULL wit[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY ROS 375 4.7 ROS 4.7.1 ROS ASSY REMOVAL 1. Remove COVER ASSY RH. (p.301) 2. Remove COVER ASSY LH. (p. 295) 3. Rem ove C OVER M S I. (p.291) 4. Remove COVER FRONT L and COVER FRONT ASS Y U. (p.292) 5. Remove COVER INNER L. (p.302) 6. Remove FRAME ASSY-PH. (p.3 27) 7. Remove CLEANER ASSY. (p.37[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY ROS 376 REINSTALLAT ION 1. Match the boss on ROS AS SY with the hole on the main unit, an d attach RO S ASSY. 2. Fasten ROS ASSY to the m a in un it with the 5 screws (silver, with flange, 10mm). 3. Attach the ground lead of ROS ASSY to the main unit, and fasten with the screw (silver, with [...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY ROS 377 4.7.2 CLEANER ASSY REMOVAL 1. Remove COVER ASSY RH. (p.301) 2. Remove the 2 screws (silver, with flange, 10mm) fastening GUIDE-ROS CLN to the main unit. 3. Remove GUIDE-ROS CLN from the main unit. 4. Remove CLEANER ASSY from the main unit. REINSTALLAT ION 1. Align CLEANER ASSY with t[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DEVE 378 4.8 DEVE 4.8.1 LATCH ASSY-ROTARY REMOVAL 1. Remove COVER ASSY LH. (p. 295) 2. Rem o ve LV/H VPS. (p.407) 3. Remove the 3 screws (silver, with flange, tapping, 8 mm) fastening LATCH ASSY-ROTARY to the main un it. 4. Unhook the three hooks fastening LATCH ASSY-ROTARY to th e main unit[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DEVE 379 4.8.2 ANTE NNA ASSY-CTRG REMOVAL 1. Remove COVER ASSY RH. (p.301) 2. Rem ove A N TENN A CT RG . (p.380) 3. Remove the 2 screws (silver, with flange, tapping, 8 mm) fastening ANTENNA ASSY - CTRG to the main un it. 4. Press the boss fastening ANTENNA ASSY-CTRG to the main unit, and re[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DEVE 380 4.8.3 ANTENN A CTRG REMOVAL 1. Remove COVER ASSY RH. (p.301) 2. Disc onnect conn ector (P/J10 6) from ANTENNA CTRG. 3. Unhook the hook fastening ANTENNA CTRG to ANTENNA ASSY-CTRG, and remove ANTENNA ASSY -CTRG. REINSTALLAT ION 1. Match the boss on ANTENNA A SSY-CTRG with the hole on[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DEVE 381 4.8.4 HO LDER ASSY-BIAS REMOVAL 1. Remove COVER ASSY RH. (p.301) 2. Remove WIRE ASSY DEVE connected to HOLDER AS SY-BIAS. 3. Un hook th e hook o n HOLDE R ASSY -BIA S from t he main un it, and slide d own, match the p rotrusi on on HO LDER ASSY- BIAS with the notch on the main unit,[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DEVE 382 4.8.5 SENSOR RO TARY HOME POSI REMOVAL 1. Remove COVER ASSY LH. (p. 295) 2. Rem o ve LV/H VPS. (p.407) 3. Remove the screw (silver, with flange, 6 mm) fastening BRACKET SENSOR to the main unit. 4. Remove BRACKET SENSOR from the main unit to g ether with SENSOR ROTARY HOME POSI. 5. D[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DEVE 383 4.8.6 HOUSING ASSY-DEVE K, HO USING ASSY- DEVE Y, HOUSING ASSY-DEVE M, HOUSING ASSY-DEVE C REMOVAL 1. Remove the To ner Cartridge. 2. Remove COVER ASSY RH. (p.301) 3. Remove COVER ASSY TOP. (p.283) 4. Remove 2ND BTR ASSY. (p.348) 5. Remove FRAME ASSY-PH. (p.3 27) 6. Re move BC R CLN[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DEVE 384 10. Unhook t he hook on PIVOT A D fastening the righ t side of HOUSING ASSY- DEVE to FRAME ASSY-ROTARY, and remove PIVOT AD. 11. Remove the screw (silver, with flange, tapping, 8 mm) fastening PIVOT ASSY fastening the left side of HOUSING ASSY-DEVE to FRAME ASSY-ROTARY, and remove P[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DEVE 385 2. Match the hole on HOUSING ASSY-DEVE with the attachment hole on the left side of FRAME ASSY-ROTAR Y, insert the shaft on PIVOT ASS Y, and fasten the left side of HOUSING ASSY-DEVE with the screw (silver, with flange, tappi ng, 8 mm ). 3. Match the hole on HOUSING ASSY-DEVE with t[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DEVE 386 4.8.7 FRAME ASSY-ROTARY REMOVAL 1. Remove COVER ASSY RH. (p.301) 2. Remove COVER ASSY TOP. (p.283) 3. Remove 2ND BTR ASSY. (p.348) 4. Remove COVER ASSY LH. (p. 295) 5. Rem ove C OVER M S I. (p.291) 6. Remove COVER FRONT L and COVER FRONT ASS Y U. (p.292) 7. Remove COVER INNER TOP. ([...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DEVE 387 24. Remove the 2 screws ( silver, with flange, 6 mm) fastening SHAFT ASSY- ROTARY on the left side of the main unit. 25. Remove SHAFT ASSY-ROTAR Y from both sides of the main unit. 26. Remove FRAME ASSY-ROTARY upward s to gether with BEARING BALL. 27. Remove BEARING BALL from FRAME [...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY FUSER 388 4.9 FUSER 4.9.1 FUSER ASSY REMOVAL 1. In the case o f the DUPLE X specification, pr ess LI NK-BUTTON upwards, release the latch, and op en DUPLEX ASSY. 2. In the case o f the standard specif ication, open COVER FUSER. 3. Open COVER ASSY TOP. 4. Remove COVER TOP SIDE L. (p.286) 5. C[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY FUSER 389 REINSTALLAT ION 1. Attach Spring to Actuator. 2. With Chute on FUSER AS SY open, insert the shaft of Actuator to the main unit, and attach together with Spring. 3. Match the connector and the boss on the FUSER ASSY side with the connector and the hole o n the main unit side, and at[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY FUSER 390 4.9.2 FU SER LOCK SW ITCH REMOVAL 1. Rem o ve FUSE R ASSY. (p.3 88) 2. Remove COVER ASSY LH. (p. 295) 3. Remove CHUTE ASSY-FSR and COVER ASSY-RR 2ND. (p.341) 4. Disc onnect the con nector (P/ J128, blue) from FUSER LOCK SWIT CH. 5. Unclamp the two clamps fastening th e harness on F[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY FUSER 391 REINSTALLAT ION 1. Match the prot rusion and hook o n FUSE R LOCK SW ITCH with the hol e on the main unit, slide FUSE R LOCK SWITCH to the left, and attach FUSER LOCK SWITCH. 2. Putting your hand beneath FUSER LOCK SWITCH to prevent it from dropping, fasten FUSER LO CK SW ITCH with[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY FUSER 392 4.9.3 HARN ESS ASSY MCU C/L REMOVAL 1. Rem o ve FUSE R ASSY. (p.3 88) 2. Remove COVER ASSY LH. (p. 295) 3. R emove CHAS SIS AS SY ESS. (p.4 11) 4. Disconnect the con nector (black-and -white) from PWBA FUSER CONT. 5. Disc onnect connect or (P417) from PWBA MCU . 6. Remov e the 2 sc[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DRIVE 393 4.10 DRIVE 4.10.1 DRIV E ASSY BT R REMOVAL 1. Remove 2ND BTR ASSY. (p.348) 2. Remove COVER ASSY LH. (p. 295) 3. Rem ove P WBA MC U . (p.404) 4. R emove CHAS SIS AS SY ESS. (p.4 11) 5. Rem ove S ENSO R TR-0. (p.361) 6. Remove GUIDE CRU ASSY D. (p.362) 7. Remove CHUTE ASSY-FSR and CO[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DRIVE 394 4.10.2 DRIV E ASSY PRO REMOVAL 1. Remove COVER ASSY LH. (p. 295) 2. Rem ove OP PANE L. (p.294) 3. Remove COVER INNER TOP. (p.299) 4. Disc onnect conn ector (P/J41 1,P/J4 14) from t he PWBA MCU. 5. Unclamp the harness on DRIVE ASSY PRO on the left side o f the main unit from the cla[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DRIVE 395 4.10.3 MOT ASSY FSR REMOVAL 1. Remove COVER ASSY LH. (p. 295) 2. Disconn ect connect or (P/J40 4) from th e PWBA MCU. 3. Unclamp the clamp fas tening the harn ess on MOT ASSY FSR and remo ve the harn ess. 4. Remove the 2 screws (silver, with flange, 4mm) fastenin g MOT ASSY FSR to [...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DRIVE 396 4.10.4 MOT ASSY MAG REMOVAL 1. Remove COVER ASSY LH. (p. 295) 2. R emove CHAS SIS AS SY ESS. (p.4 11) 3. Disconn ect connect or (P/J40 5) and connecto r (P/J406) from PWB A MCU. 4. Remove the 3 screws (s ilver, with flange, 10 mm) fastenin g MOT ASSY MAG to the main unit. 5. Remove[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DRIVE 397 4.10.5 MOT ASSY ROT REMOVAL 1. Remove COVER ASSY RH. (p.301) 2. Remove COVER ASSY LH. (p. 295) 3. Rem ove C OVER M S I. (p.291) 4. Remove COVER FRONT L and COVER FRONT ASS Y U. (p.292) 5. Rem o ve LV/H VPS. (p.407) 6. Unclamp the clamp fas tening WIRE ASSY DEVE, and remo ve WIRE AS[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DRIVE 398 4.10.6 MOT ASSY P/R REMOVAL 1. Remove COVER ASSY LH. (p. 295) 2. Disc onnect connect or (P/J20 0) and connect or (P/J201) from MOT A SSY P/R . 3. Rem ove th e 4 sc rews (s ilve r, wit h flan ge, 1 0 mm) fa steni n g MO T A SSY P/R to the main unit. 4. Remove MOT ASSY P/R from the m[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DRIVE 399 4.10.7 MOT ASSY MICRO REMOVAL 1. Remove COVER ASSY LH. (p. 295) 2. Unclamp the clamp fas tening the h arness on MOT ASSY MICRO. 3. Disconn ect connect or (P/J60 0) from MOT A SSY MICRO. 4. Remove th e 2 screws (s ilver, with fl ang e, 4mm) fastening MOT ASSY MICRO to the main unit.[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY ELEC 400 4.11 ELEC 4.11.1 SE NSOR HUM & TEMP REMOVAL 1. Remove COVER ASSY RH. (p.301) 2. Disc onnect connect or (P/J10 4) from SEN SOR HUM & TEMP. 3. Remove the screw (silver, with flange, tapping, 8 mm) fastening SENSOR HUM & TE MP to th e m ain uni t. 4. Remove SENSOR HUM &[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY ELEC 401 4.11.2 PWBA HVPS REMOVAL 1. Remove COVER ASSY RH. (p.301) 2. Remove COVER ASSY LH. (p. 295) 3. Rem ove C OVER M S I. (p.291) 4. Remove COVER FRONT L and COVER FRONT ASS Y U. (p.292) 5. Remove COVER INNER L. (p.302) 6. Dis connect conn ector (P/J 516) fr om PWBA H VPS, and remove WI [...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY ELEC 402 4.11.3 PWB ASSY ROT REMOVAL 1. Remove COVER ASSY RH. (p.301) 2. Remove COVER ASSY LH. (p. 295) 3. Rem ove C OVER M S I. (p.291) 4. Remove COVER FRONT L and COVER FRONT ASS Y U. (p.292) 5. Disc onnect connect or (P/J43 0), connecto r (P/J432 ) and connector (P/J433) from PWB ASSY ROT[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY ELEC 403 4.11.4 PWBA CRUM REMOVAL 1. Remove COVER ASSY RH. (p.301) 2. Remove COVER ASSY LH. (p. 295) 3. Rem ove C OVER M S I. (p.291) 4. Remove COVER FRONT L and COVER FRONT ASS Y U. (p.292) 5. Rem o ve LV/H VPS. (p.407) 6. Rem ove MO T ASSY RO T. (p.397) 7. Remove the screw (sil ver, with f[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY ELEC 404 4.11.5 PWBA MCU  When usi ng the old PWBA MCU REMOVAL 1. Remove COVER ASSY LH. (p. 295) 2. Disconnect all connectors from the PWBA MCU. 3. Rem ove t h e 4 s c rew s (s ilv er, wi t h fl ange, 6mm) fastening PWBA MCU to the main unit. 4. Remove PWBA MCU from the main unit. REINSTA[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY ELEC 405  When replacing PWBA MCU with a new o ne The life information of the re pl acement parts, correction p arameters, etc are stor ed in EEPROM on th e MCU board (PWB A MCU). The EEPR OM was mounted in IC socket of the MCU boar d on previo us models , whereas the EEP ROM of this prod[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY ELEC 406 Table 4-8. Symptoms when the connector is loo se Connector No. Panel Indication Symptom Error Caused by Co nnecto r Disconnection P/J400 --- P rinting is not possible. --- P/J401 Service Req E537 Printing is n ot possible. Fuser error P/J403 C Open Print ing is n ot possible. The Co[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY ELEC 407 4.11.6 LV /HVPS REMOVAL 1. Remove COVER ASSY LH. (p. 295) 2. Disconnect all conn ectors from the LV/HVPS. 3. Remove the 6 screws (silver, with flange, 6 mm) fastening LV/HVPS to the main unit. 4. Remove the top part of LV/HVPS from th e protrusion of the br acket attached to the mai[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY ELEC 408 Table 4-9. Symptoms when the connector is loo se Connector No. Panel Indication Symptom Error Caused by Co nnecto r Disconnection P/J501 --- Co nt rol pa n el is not av ailable. --- P/J502 --- P rinting is not possible. --- P/J503 --- Main power is not supp lied. --- D (504) --- Pri[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY ELEC 409 4.11.7 PWB A ESS (BOA RD ASSY., MAIN) REMOVAL 1. Remove COVER ASSY LH. (p. 295) 2. Disconnect all conn ectors from the PWBA ESS. 3. Rem ove th e 4 sc rews (s ilv e r, wit h fla n ge, 6 mm) fa s teni ng PW BA ESS t o CHASSIS ESS and the screws fasten ing the interface conn ectors. 4.[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY ELEC 410 4.11.8 PWBA FUSER CONT REMOVAL 1. Remove COVER ASSY LH. (p. 295) 2. R emove CHAS SIS AS SY ESS. (p.4 11) 3. Disconnect all conn ectors from the PWBA FUSER CONT. 4. Rem ove th e 2 sc rews (s ilve r, wit h flan ge, 8 mm) fas ten i ng PWBA F USER CONT to the m ain unit. 5. Remove the s[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY ELEC 411 4.11.9 CHA SSIS ASSY E SS (REF ERENC E ONLY) REMOVAL 1. Remove COVER ASSY LH. (p. 295) 2. Disconnect all conn ectors from the PWBA ESS. 3. Remov e disc onnected connect ors f rom the ho le on CHA SSIS E SS. 4. Unclamp the clamp on CHASSIS ASSY ESS, and remove the ha rness. 5. Rem ov[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DUPLEX 412 4.12 DUPLEX 4.12.1 DUPL EX ASSY REMOVAL 1. Press LINK-BUTTON upward to release the latch and open DUPLEX ASSY. 2. Remove COVER CONNECTOR, and disconnect connector (P/J607) connected to the main unit. 3. Rem ove th e 2 SCR EW SUPP O RTs f a stenin g the l e ft and ri ght SU P POR T[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DUPLEX 413 4.12.2 COV ER-R DUP REMOVAL 1. Rem o ve DUP LEX ASSY . (p.412) 2. Remove the 3 screws (silver, with flange, tapping, 10mm) fastening COVER-R DUP to DUPLEX ASSY. 3. Remove COVER-R DUP from DUPLEX ASSY. REINSTALLAT ION 1. Attach COVER-R DUP to DUP LEX ASSY. 2. Attach COVER-R DUP to [...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DUPLEX 414 4.12.3 COV ER-L D UP REMOVAL 1. Rem o ve DUP LEX ASSY . (p.412) 2. Remove the 3 screws (silver, with flange, tapping, 10mm) fastening COVER-L DUP to DUPLEX ASSY. 3. Remove COVER-L DUP from DUPLEX ASSY. REINSTALLAT ION 1. Attach COVER - L DUP to DUPLEX ASSY . 2. Attach COVER-L DUP [...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DUPLEX 415 4.12.4 COV ER-INV REMOVAL 1. Rem o ve DUP LEX ASSY . (p.412) 2. Remove COVER-R DUP. (p.413) 3. Remove COVER-L DUP. (p.414) 4. Remove LINK LATC H and LINK-BUTTON. (p.4 16) 5. Open COVER UP-DUP TRAN S, and remove INVERTER ASSY DUP. Note that COVER LOW-DUP TRANS and COVER UP-DUP TRAN[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DUPLEX 416 4.12.5 LI NK-LATCH, L INK-BUTTO N REMOVAL 1. Rem o ve DUP LEX ASSY . (p.412) 2. Remove COVER-R DUP. (p.413) 3. Un hook th e hook faste n ing L I NK-BU T TON to DUP LEX AS SY, and remo v e LINK-BUTTON together with LINK-LATCH and SPRING-LINK. 4. Remove SPRING-LINK from LINK-BUTTON.[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DUPLEX 417 4.12.6 INVE RTER ASSY DU P, TRANSPOR T ASSY DUP REMOVAL 1. Rem o ve DUP LEX ASSY . (p.412) 2. Remove COVER-R DUP. (p.413) 3. Remove COVER-L DUP. (p.414) 4. Remove LINK-LATC H and LINK-BUTT ON. (p.416) 5. Remove COVER LOW-DUP TRANS. (p .436 ) 6. Remove COVER UP-DUP TRAN S. (p.4 37)[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DUPLEX 418 REINSTALLAT ION 1. Match each of the b osses and holes on INVER TER ASSY DUP with TRANSPORT ASSY DUP , and attach INVERTER ASSY DUP to TRANSPORT ASSY D UP. 2. Attach INVERTER ASSY DUP to TRANSPORT ASSY DUP with the 2 screws (silver, with flange, tapping, 10mm). 3. Conn ect connect[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DUPLEX 419 4.12.7 SO LENOID ASSY DUP REMOVAL 1. Rem o ve DUP LEX ASSY . (p.412) 2. Remove COVER-R DUP. (p.413) 3. Remove COVER-L DUP. (p.414) 4. Remove LINK-LATC H and LINK-BUTT ON. (p.416) 5. Open COVER UP-DUP TRAN S, and remove INVERTER ASSY DUP. Note that COVER LOW-DUP TRANS and COVER UP-[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DUPLEX 420 3. Connect connector (P/J611) to SOLENOID ASSY D UP. 4. Attach COVER-INV. (p.415) 5. Attach INVERTER ASSY DUP . (p.417) 6. Attach LINK-LATCH and LINK-BUTTON. (p.41 6) 7. Attach COVER-L DUP. (p.414) 8. Attach COVER-R DUP . (p.413 ) 9. Attach DUPLEX ASSY. (p.412) C A U T I O N When [...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DUPLEX 421 4.12.8 ACT UATOR INV REMOVAL 1. Rem o ve DUP LEX ASSY . (p.412) 2. Remove COVER-R DUP. (p.413) 3. Remove COVER-L DUP. (p.414) 4. Remove LINK-LATC H and LINK-BUTT ON. (p.416) 5. Open COVER UP-DUP TRAN S, and remove INVERTER ASSY DUP. Note that COVER LOW-DUP TRANS and COVER UP-DUP T[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DUPLEX 422 4.12.9 SE NSOR UPPE R PASS REMOVAL 1. Rem o ve DUP LEX ASSY . (p.412) 2. Remove COVER-R DUP. (p.413) 3. Remove COVER-L DUP. (p.414) 4. Remove LINK-LATC H and LINK-BUTT ON. (p.416) 5. Open COVER UP-DUP TRAN S, and remove INVERTER ASSY DUP. Note that COVER LOW-DUP TRANS and COVER UP[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DUPLEX 423 REINSTALLAT ION 1. Match the hook on SENSOR UP PER PASS wit h the att achment posi tion, and attach to BRACKET-SNS. 2. Conn ect connector (P/J124) t o SENSOR UPPER PAS S. 3. Match the hole on BRACKET-SNS with the boss on INVERTER ASSY DUP, and attach BRACKET-SNS togeth er with SEN[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DUPLEX 424 4.12.10 MO TOR ASSY DUP INV REMOVAL 1. Rem o ve DUP LEX ASSY . (p.412) 2. Remove COVER-L DUP. (p.414) 3. Remove the 4 screws (silver, with flange, tapping, 10mm) fastening BRACKET- MOTO INV to DUPLEX ASSY. 4. Remove BRACKET-MOTO INV from DUPLEX ASSY together with MOTOR ASSY DUP IN[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DUPLEX 425 3. Connect connector (P/J612) of MOTOR ASSY DUP INV to BRAC KET-MO TO INV. 4. Match the hole on BRACKET-MOTO INV with the shaft on DUPLEX ASSY, and attach together with MOTOR ASSY DUP INV. 5. Fasten BRACKET-MOTO INV to DUPLEX ASSY with the 4 screws (silver, with flange, tapping, 1[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DUPLEX 426 4.12.11 RO LLER ASSY INVE RTER REMOVAL 1. Rem o ve DUP LEX ASSY . (p.412) 2. Remove COVER-R DUP. (p.413) 3. Remove COVER-L DUP. (p.414) 4. Remove LINK-LATC H and LINK-BUTT ON. (p.416) 5. Remove CHUTE ASSY-INV LOW. (p.427) 6. Unhook the h ook on GEAR 3 0 fast ened to ROLLER ASSY IN[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DUPLEX 427 4.12.12 CH UTE ASSY-INV LOW REMOVAL 1. Rem o ve DUP LEX ASSY . (p.412) 2. Remove the 2 screws (silver, with flange, tapping, 10mm) CHUTE ASSY-INV LOW to DUPLEX ASSY. 3. Remove CHUTE ASSY-INV LOW from DUPLEX ASSY . REINSTALLAT ION 1. Match the hole on CHUTE AS SY-INV LO W with th e[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DUPLEX 428 4.12.13 L ATCH DUP R , LATCH DUP L REMOVAL 1. Rem o ve DUP LEX ASSY . (p.412) 2. Remove COVER-R DUP. (p.413) 3. Remove COVER-L DUP. (p.414) 4. Remove LINK-LATC H and LINK-BUTT ON. (p.416) 5. Unclamp the clamp on BKT MOTOR DUP TRANS, and remo ve the harness. 6. Dis connect conn ect[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DUPLEX 429 REINSTALLAT ION 1. Match the protrus ions on LATCH DU P R and LA TCH DUP L wi th th e notches o f hole on DUPLEX ASSY, attach to SHAFT LATCH, turn LATCH DUP R and LATCH DUP L, and faste n LATCH DUP R and LATCH DUP L to DUPLEX ASSY. 2. Fasten LATCH DUP L to DUPLEX ASSY wi th the sc[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DUPLEX 430 4.12.14 SWI TCH-DUP DOO R REMOVAL 1. Rem o ve DUP LEX ASSY . (p.412) 2. Remov e the sc rew (s ilv er, with flang e, tapp ing, 10 mm ) fast ening C OVER R EAR from DUPLEX ASSY. 3. Slide C OVER REAR to t he right , unhook t he 2 hook s on the rear of COVER REAR from DUPLEX ASSY, and[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DUPLEX 431 4.12.15 ACT UATOR DUP REMOVAL 1. Rem o ve DUP LEX ASSY . (p.412) 2. Remove the screw (silver, with flange, tapping, 10mm) fastening COVER R EAR from DUPLEX ASSY. 3. Slide C OVER REAR to t he right , unhook t he 2 hook s on the rear of COVER REAR from DUPLEX ASSY, and remove COVER [...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DUPLEX 432 4.12.16 SEN SOR LO W PASS REMOVAL 1. Rem o ve DUP LEX ASSY . (p.412) 2. Remove the screw (silver, with flange, tapping, 10mm) fastening COVER R EAR from DUPLEX ASSY. 3. Slide C OVER REAR to t he right , unhook t he 2 hook s on the rear of COVER REAR from DUPLEX ASSY, and remove CO[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DUPLEX 433 4.12.17 SUPPO RT DUP REMOVAL 1. Rem o ve DUP LEX ASSY . (p.412) 2. Remove the KL ring fastening SUPPORT DUP to the sh aft on DUPLEX AS SY. 3. Remove S UPPORT DUP from the shaft on DU PLEX ASSY. REINSTALLAT ION 1. Attach SUPPORT DUP to the sh aft on DUPLEX ASS Y. 2. Fasten SUPPORT [...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DUPLEX 434 4.12.18 H INGE ASSY L REMOVAL 1. Rem o ve DUP LEX ASSY . (p.412) 2. Remove COVER-L DUP. (p.414) 3. Remove the E- ring fasten ing HINGE ASSY L to DUPLEX AS SY. 4. Remove HINGE ASSY L from DUPLEX ASSY. REINSTALLAT ION 1. Match the hole on HINGE ASSY L with the D cut surface on SHAFT[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DUPLEX 435 4.12.19 H INGE ASSY R REMOVAL 1. Rem o ve DUP LEX ASSY . (p.412) 2. Remove COVER-R DUP. (p.413) 3. Remove the E- ring fasten ing HINGE ASSY R to DUPLEX ASSY. 4. Remove HINGE ASSY R from DUPLEX ASSY together with HINGE-R. 5. Remove the 2 screws (silver, with flange, 6 mm) fastening[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DUPLEX 436 4.12.20 CO VER LOW-DUP TRANS REMOVAL 1. Rem o ve DUP LEX ASSY . (p.412) 2. Remove the 2 screws (silver, with flange, tapping, 10mm) fastenin g COVER LOW-DUP TRANS to DUPLEX ASSY. 3. Remove COVER LOW-DUP TRANS from DUPLEX ASS Y. REINSTALLAT ION 1. Match the p rotrusion on COVER LOW[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DUPLEX 437 4.12.21 CO VER UP-DUP TRAN S REMOVAL 1. Rem o ve DUP LEX ASSY . (p.412) 2. Remove COVER LOW-DUP TRANS. (p .436 ) 3. Open COVER UP-DUP TRANS . 4. Bend down the att achment section on the r ight side of COVER UP- DUP TRANS with a small screwdriver or a similar tool, draw out the bos[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DUPLEX 438 4.12.22 PAD DAMPER L REMOVAL 1. Rem o ve DUP LEX ASSY . (p.412) 2. Remove COVER-L DUP. (p.414) 3. Remove HINGE ASSY L. (p.434) 4. Remove the screw (silver, with flange, 6 mm) fastening BRACKET PAD L to HINGE-L. 5. Remove BRACKET PAD L from HINGE-L together with PAD DAMPER L. 6. Pe[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DUPLEX 439 4.12.23 PAD DAMPER R REMOVAL 1. Rem o ve DUP LEX ASSY . (p.412) 2. Remove COVER-R DUP. (p.413) 3. Remove HINGE ASSY R. (p.435) 4. Remove the screw (silver, with flange, 6 mm) fastening BRACKET PAD R LOWER to BRACKET AS SY R. 5. Remove BRACKET PAD R LOWER from BRACKET ASSY R togeth[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DUPLEX 440 4.12.24 RO LLER ASSY DUP REMOVAL 1. Rem o ve DUP LEX ASSY . (p.412) 2. Remove COVER-R DUP. (p.413) 3. Remove COVER-L DUP. (p.414) 4. Remove COVER LOW-DUP TRANS. (p .436 ) 5. Remove COVER UP-DUP TRAN S. (p.4 37) 6. Unclamp the clamp on BKT MOTOR DUP TRANS, and remo ve the harness. [...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DUPLEX 441 REINSTALLAT ION 1. Insert the shaft left side on ROLLER AS SY DUP into the left-side bearin g on DUPLEX ASSY, and slide RO LLER ASSY DUP to the right to attach. 2. Match the double D cut surface of BEARING DUP with the left and right bearings of DUPLEX ASSY, attach BEARING DUP, an[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DUPLEX 442 4.12.25 PW BA DUP-L REMOVAL 1. Rem o ve DUP LEX ASSY . (p.412) 2. Remove COVER-L DUP. (p.414) 3. Disc onnect connect or (P/J44 2), connecto r (P/J443 ) and connector (P/J444) from PWBA DUP-L. 4. Rem ove th e 2 screw s (sil ver, ta pping, 5mm) fasteni ng PWBA DUP-L to DUPLE X ASSY.[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DUPLEX 443 4.12.26 MO TOR ASSY DUP REMOVAL 1. Rem o ve DUP LEX ASSY . (p.412) 2. Remove COVER-L DUP. (p.414) 3. Unclamp the clamp on BKT MOTOR DUP TRANS, and remo ve the harness. 4. Dis connect conn ector (P/J 444) from PWBA DU P-L. 5. Remove the 4 screws (silver, with flange, tapping, 10 mm[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DUPLEX 444 REINSTALLAT ION 1. Match th e harness si de of MOTOR ASSY DUP with the mark on BKT MOTOR DUP TRANS, and attach to MOTOR ASSY DUP . 2. Fasten MOT OR ASSY DUP to BKT MOT OR DUP TRANS with the 4 screws (silver, 5mm). 3. Conn ect connector (P/J442) o f MOTOR ASSY DUP on PW BA DUP-L, a[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY DUPLEX 445 4.12.27 RO LLER ASSY DUP O UT REMOVAL 1. Rem o ve DUP LEX ASSY . (p.412) 2. Remove COVER-R DUP. (p.413) 3. Remove COVER-L DUP. (p.414) 4. Remove COVER LOW-DUP TRANS. (p .436 ) 5. Remove COVER UP-DUP TRAN S. (p.4 37) 6. Remove the E- ring fasten ing ROLLER ASSY DUP OUT to DUPLEX AS[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY 500 PAPER CASSETTE & 500 PAPER FEEDER 446 4.13 500 PAPER CASSETTE & 500 PAPER FEEDER 4.13.1 500 PAPER CASSETTE ASSY REMOVAL 1. Draw out 500 PAPER CASSETTE ASSY until it comes to a stop, then slightly lift up the fron t side, and remove 500 P APER CASSETTE ASSY from 5 00 PAPER FEEDER.[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY 500 PAPER CASSETTE & 500 PAPER FEEDER 447 4.13.2 GUI DE END ASSY REMOVAL 1. Remov e 500 PAPER CASSETTE ASSY. (p.446) 2. Rem ove P LATE AS SY BO TTOM 500. (p.448) 3. Slide GUIDE END ASSY to the rear, match the 4 protrusions on GUIDE END ASSY with the no tches on CASSETTE 50 0, and li ft u[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY 500 PAPER CASSETTE & 500 PAPER FEEDER 448 4.13.3 PL ATE ASSY BOTT OM 500 REMOVAL 1. Remov e 500 PAPER CASSETTE ASSY. (p.446) 2. Slide LOCK LIFT R and L OCK LIFT L, and unlock the locks . 3. Un hook th e hook s on RO LL LIN K fas tened to the sh aft of PLATE ASSY BOTTOM 500 on both t he l[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY 500 PAPER CASSETTE & 500 PAPER FEEDER 449 REINSTALLAT ION 1. Match the boss on the rear of PLATE ASSY BOTTOM 500 with SPRING NF. 2. Insert the shaft on PLATE ASSY BOTTOM 500 into the oblong hole on CASSETTE 500 while pushing the side of C ASSETTE 500 ou tward, and attach PLATE ASSY BOTTO[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY 500 PAPER CASSETTE & 500 PAPER FEEDER 450 4.13.4 GUI DE PAPER L ASSY 500, GUID E PAPER R ASSY 500 REMOVAL 1. Remov e 500 PAPER CASSETTE ASSY. (p.446) 2. Rem ove P LATE AS SY BO TTOM 500. (p.448) 3. Unhook the hook on CASSE TTE 500 fastenin g PINION 12 , and remo ve PINION 12. 4. Sli de G[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY 500 PAPER CASSETTE & 500 PAPER FEEDER 451 4.13.5 COV ER FRONT CST 500 REMOVAL 1. Remov e 500 PAPER CASSETTE ASSY. (p.446) 2. Remove the 2 screws (silver, with flange, tapping, 8 mm) fastening COVER FRONT CST 500 to 500 PAPER CASS ETTE ASSY. 3. Un hook th e hook on th e base of COV ER FRO[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY 500 PAPER CASSETTE & 500 PAPER FEEDER 452 4.13.6 500 PAPER FEEDER ASSY (REFERE NCE ONLY) REMOVAL 1. Remov e 500 PAPER CASSETTE ASSY. (p.446) 2. Turn L OCK MC TO FDR on bot h the left and rig ht sides CW by 90° to unlock from the main unit. 3. Holding the pitted area on the lower side of[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY 500 PAPER CASSETTE & 500 PAPER FEEDER 453 4.13.7 COV ER LEF T 500 REMOVAL 1. Remov e 500 PAPER CASSETTE ASSY. (p.446) 2. Rem ove t h e 5 sc rew s (s ilv e r, wit h fla nge, 8 mm) fa ste ni ng CO VER L EFT 50 0 to 500 PAPER FE EDER ASSY. 3. Remov e COVER LEFT 500 fr om 500 PAPER FEEDER AS[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY 500 PAPER CASSETTE & 500 PAPER FEEDER 454 4.13.8 CHU TE FDR ASSY 5 00 REMOVAL 1. Remov e 500 PAPER CASSETTE ASSY. (p.446) 2. Remove COVER RIGHT 500. (p.455) 3. Remove the screw (silver, with flange, tapping, 8 mm) fastening CHUTE FDR ASSY 500 . 4. Open CHUTE FDR ASSY 500. 5. Press the at[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY 500 PAPER CASSETTE & 500 PAPER FEEDER 455 4.13.9 COV ER RIGH T 500 REMOVAL 1. Remov e 500 PAPER CASSETTE ASSY. (p.446) 2. Remove the 5 screws (silver, with flange, 8 m m) fastening COVER RIGHT 500 to 500 PAPER FE EDER ASSY. 3. Remove COVER RIGHT 500 from 500 PAPER FEEDER ASSY. REINSTALLA[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY 500 PAPER CASSETTE & 500 PAPER FEEDER 456 4.13.10 PW BA TRAY 500 REMOVAL 1. Remov e COVER LEFT 50 0. (p.4 53) 2. Disc onnect connect or (P/J43 5), connecto r (P/J436 ) and connector (P/J437) from PWBA TRAY 500. 3. Rem ove th e 3 sc rews (s ilv e r, wit h fla n ge, 6 mm) fa s teni ng PW B[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY 500 PAPER CASSETTE & 500 PAPER FEEDER 457 4.13.11 PW BA MOT REMOVAL 1. Remov e COVER LEFT 50 0. (p.4 53) 2. Disconn ect connect or (P/J44 0) and connecto r (P/J446) from PWBA MOT. 3. Rem ove th e 3 sc rews (s ilv e r, wit h fla n ge, 6 mm) fa s teni ng PW BA MOT t o 500 PAPER FEEDER ASSY[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY 500 PAPER CASSETTE & 500 PAPER FEEDER 458 4.13.12 DRI VE ASSY FEED REMOVAL 1. Remov e COVER LEFT 50 0. (p.4 53) 2. Remove CLUTC H ASSY FEED. (p.461) 3. Disc onnect conn ector (P/J44 6) from PWBA MOT an d connector (P/J610) from SOLENOID FEED. 4. Remove the 4 screws (silver, 6 mm) fasteni[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY 500 PAPER CASSETTE & 500 PAPER FEEDER 459 4.13.13 SOL ENOID FEED REMOVAL 1. Remov e COVER LEFT 50 0. (p.4 53) 2. Remove CLUTC H ASSY FEED. (p.461) 3. Rem o ve DRI VE ASSY F EED. (p.458 ) 4. Remove the screw (silver, 6 mm) fast ening S OLE N OID F EED to DR IV E A SSY FEED. 5. Remov e SOL[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY 500 PAPER CASSETTE & 500 PAPER FEEDER 460 4.13.14 MO TOR ASSY FEEDER REMOVAL 1. Remov e COVER LEFT 50 0. (p.4 53) 2. Unclamp the clamp on DRIVE ASSY F EED, and remove t he harn ess on MOT OR ASSY FEEDER. 3. Disc onnect conn ector (P/J44 6) from PWBA MOT. 4. Remove the 2 screws (silver, 6[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY 500 PAPER CASSETTE & 500 PAPER FEEDER 461 4.13.15 CL UTCH ASSY FEED REMOVAL 1. Remov e COVER LEFT 50 0. (p.4 53) 2. Unclamp the clamp on DRIVE ASSY FEED, and remove th e harness on CLUTCH ASSY FEED. 3. Disc onnect connect or (P/J60 9) from CLU TCH ASSY F EED. 4. Remove the KL r ing faste[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY 500 PAPER CASSETTE & 500 PAPER FEEDER 462 4.13.16 H ARNESS-ASSY FEED 1 REMOVAL 1. Remove 5 00 PAPER FEE DE R ASSY. (p.452) 2. Remov e COVER LEFT 50 0. (p.4 53) 3. Unclamp the clamp fas tening the h arness of HARNES S-ASSY FEED 1. 4. Dis connect conn ector (P/J 435) fr om PWBA-TR AY 500. [...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY 500 PAPER CASSETTE & 500 PAPER FEEDER 463 4.13.17 RO LL ASSY TURN 500 REMOVAL 1. Remove C HUTE FDR ASSY 500. (p.4 54) 2. Remov e COVER LEFT 50 0. (p.4 53) 3. Remove COVER RIGHT 500. (p.455) 4. Remove CLUTC H ASSY FEED. (p.461) 5. Rem o ve DRI VE ASSY F EED. (p.458 ) 6. Remove HOUSING ASS[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY 500 PAPER CASSETTE & 500 PAPER FEEDER 464 4.13.18 SWI TCH FE EDER DO OR REMOVAL 1. Remove C HUTE FDR ASSY 500. (p.4 54) 2. Remov e COVER LEFT 50 0. (p.4 53) 3. Remov e the screw (si lver, tapp ing, 8 mm) fasten ing CAP FE EDER to 500 PAP ER FEEDER ASSY. 4. Remov e CAP FEEDER f rom 500 P [...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY 500 PAPER CASSETTE & 500 PAPER FEEDER 465 4.13.19 H ARNESS-ASSY FEED 2 REMOVAL 1. Remove 5 00 PAPER FEE DE R ASSY. (p.452) 2. Remov e COVER LEFT 50 0. (p.4 53) 3. Unclamp the clamp fas tening the h arness of HARNES S-ASSY FEED 2. 4. Dis connect conn ector (P/J 436) fr om PWBA-TR AY 500. [...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY 500 PAPER CASSETTE & 500 PAPER FEEDER 466 4.13.20 CH UTE ASSY 500 REMOVAL 1. Remov e 500 PAPER CASSETTE ASSY. (p.446) 2. Remove C HUTE FDR ASSY 500. (p.4 54) 3. Remove COVER RIGHT 500. (p.455) 4. Remov e COVER LEFT 50 0. (p.4 53) 5. Remove CLUTC H ASSY FEED. (p.461) 6. Rem o ve DRI VE AS[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY 500 PAPER CASSETTE & 500 PAPER FEEDER 467 REINSTALLAT ION 1. Insert the left-side shaft o n CHUTE ASSY 500 into the bearing o n GUIDE CST L. 2. Inser t the right -side shaft o n CHUTE ASSY 500 in to the bearing on GUIDE CST R, and attach CHU T E AS SY 5 00 to 500 PAPER FEE DER ASSY. 3. M[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY 500 PAPER CASSETTE & 500 PAPER FEEDER 468 4.13.21 H OLDER A SSY RETARD 50 0 REMOVAL 1. Remov e 500 PAPER CASSETTE ASSY. (p.446) 2. Remove C HUTE FDR ASSY 500. (p.4 54) 3. Remove COVER RIGHT 500. (p.455) 4. Remov e COVER LEFT 50 0. (p.4 53) 5. Remove CLUTC H ASSY FEED. (p.461) 6. Rem o ve[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY 500 PAPER CASSETTE & 500 PAPER FEEDER 469 REINSTALLAT ION 1. Match SPRING RETARD with the boss o n CHUTE ASS Y 500, and at tach HOLDER ASSY RE TARD 500 to CHUTE AS SY 500 while ben ding dow n the bosses on both s ides of HOLDER A SSY RETARD 500. 2. Attach LEVER 500 to CHUTE ASSY 500 whil[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY 500 PAPER CASSETTE & 500 PAPER FEEDER 470 4.13.22 FIL M ASSY FDR REMOVAL 1. Open CHUTE FDR ASSY 500. 2. Rem ove th e 4 sc rews (s ilv e r, tap ping , 8 mm) faste ni ng FI LM AS SY FDR t o CHUTE ASSY 500. 3. Remov e FILM ASSY FDR f rom CHUTE ASSY 500. REINSTALLAT ION 1. Match the hole on [...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY 500 PAPER CASSETTE & 500 PAPER FEEDER 471 4.13.23 STO PPER CST R REMOVAL 1. Remov e 500 PAPER CASSETTE ASSY. (p.446) 2. Remove C HUTE FDR ASSY 500. (p.4 54) 3. Remove COVER RIGHT 500. (p.455) 4. Remov e COVER LEFT 50 0. (p.4 53) 5. Remove CLUTC H ASSY FEED. (p.461) 6. Rem o ve DRI VE ASS[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY 500 PAPER CASSETTE & 500 PAPER FEEDER 472 4.13.24 G UIDE CST R REMOVAL 1. Remov e 500 PAPER CASSETTE ASSY. (p.446) 2. Remove C HUTE FDR ASSY 500. (p.4 54) 3. Remove COVER RIGHT 500. (p.455) 4. Remov e COVER LEFT 50 0. (p.4 53) 5. Remove CLUTC H ASSY FEED. (p.461) 6. Rem o ve DRI VE ASSY [...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY 500 PAPER CASSETTE & 500 PAPER FEEDER 473 4.13.25 G UIDE CST L REMOVAL 1. Remov e 500 PAPER CASSETTE ASSY. (p.446) 2. Remove C HUTE FDR ASSY 500. (p.4 54) 3. Remove COVER RIGHT 500. (p.455) 4. Remov e COVER LEFT 50 0. (p.4 53) 5. Remove CLUTC H ASSY FEED. (p.461) 6. Rem o ve DRI VE ASSY [...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY 500 PAPER CASSETTE & 500 PAPER FEEDER 474 REINSTALLAT ION 1. Attach STOPPER CST L. (p.475) 2. Match the boss on GUIDE C ST L with t he hole on 500 PAPE R FEEDER ASSY while inserting SWITCH FEEDER DOOR into the hole on the rear of GUIDE CST L, and attach GUIDE C ST L. 3. Fasten GUIDE CST [...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY 500 PAPER CASSETTE & 500 PAPER FEEDER 475 4.13.26 STO PPER CST L REMOVAL 1. Remov e 500 PAPER CASSETTE ASSY. (p.446) 2. Remove C HUTE FDR ASSY 500. (p.4 54) 3. Remove COVER RIGHT 500. (p.455) 4. Remov e COVER LEFT 50 0. (p.4 53) 5. Remove CLUTC H ASSY FEED. (p.461) 6. Rem o ve DRI VE ASS[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY 500 PAPER CASSETTE & 500 PAPER FEEDER 476 4.13.27 H OUSING ASSY FEE D REMOVAL 1. Remov e 500 PAPER CASSETTE ASSY. (p.446) 2. Remov e COVER LEFT 50 0. (p.4 53) 3. Remove CLUTC H ASSY FEED. (p.461) 4. Rem o ve DRI VE ASSY F EED. (p.458 ) 5. Unhook the hook on GEAR FEED fastened to the shaf[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY 500 PAPER CASSETTE & 500 PAPER FEEDER 477 REINSTALLAT ION 1. Match the 4 hooks on HOUSING ASSY FEED with the attachment positions, and attach to 500 PAPER FEE DE R ASSY. 2. Slide HOUSING ASSY FEED to th e rear side, insert the boss on HOUSING ASSY FEED into the hole on 500 PAPER FEEDER A[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY 500 PAPER CASSETTE & 500 PAPER FEEDER 478 4.13.28 SEN SOR NO PAPER REMOVAL 1. Remov e 500 PAPER CASSETTE ASSY. (p.446) 2. Remov e COVER LEFT 50 0. (p.4 53) 3. Remove CLUTC H ASSY FEED. (p.461) 4. Rem o ve DRI VE ASSY F EED. (p.458 ) 5. Remove HOUSING ASSY FEED. (p.476) 6. Rem ove th e 2 [...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY 500 PAPER CASSETTE & 500 PAPER FEEDER 479 4.13.29 ACT UATOR NO P APER CST REMOVAL 1. Remov e 500 PAPER CASSETTE ASSY. (p.446) 2. Remov e COVER LEFT 50 0. (p.4 53) 3. Remove CLUTC H ASSY FEED. (p.461) 4. Rem o ve DRI VE ASSY F EED. (p.458 ) 5. Remove HOUSING ASSY FEED. (p.476) 6. Unhook t[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY 500 PAPER CASSETTE & 500 PAPER FEEDER 480 REINSTALLAT ION 1. Insert the shaft on ACTUATOR NO PAPER C ST from the notch on HOUSING ASSY FE E D . 2. Fit the shaft on ACTUATO R NO PAP ER CST onto the hook on HOUSING ASSY FEED while inserting ACTUA TOR NO PAPER CST into the sen so r on SENSO[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY 500 PAPER CASSETTE & 500 PAPER FEEDER 481 4.13.30 ACT UATOR T/R REMOVAL 1. Remov e 500 PAPER CASSETTE ASSY. (p.446) 2. Remov e COVER LEFT 50 0. (p.4 53) 3. Remove CLUTC H ASSY FEED. (p.461) 4. Rem o ve DRI VE ASSY F EED. (p.458 ) 5. Remove HOUSING ASSY FEED. (p.476) 6. Remov e ROLL ASSY [...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY 500 PAPER CASSETTE & 500 PAPER FEEDER 482 4.13.31 SEN SOR T/ R REMOVAL 1. Remov e 500 PAPER CASSETTE ASSY. (p.446) 2. Remov e COVER LEFT 50 0. (p.4 53) 3. Remove CLUTC H ASSY FEED. (p.461) 4. Rem o ve DRI VE ASSY F EED. (p.458 ) 5. Remove HOUSING ASSY FEED. (p.476) 6. Remov e ROLL ASSY F[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY 500 PAPER CASSETTE & 500 PAPER FEEDER 483 4.13.32 RO LL ASSY FEED 500 REMOVAL 1. Remov e 500 PAPER CASSETTE ASSY. (p.446) 2. Remov e COVER LEFT 50 0. (p.4 53) 3. Remove CLUTC H ASSY FEED. (p.461) 4. Rem o ve DRI VE ASSY F EED. (p.458 ) 5. Remove HOUSING ASSY FEED. (p.476) 6. Rem ove th e[...]

EPSON AcuLaser C110 0 Revision B DISASSEMBLY AND ASSEMBLY 500 PAPER CASSETTE & 500 PAPER FEEDER 484 REINSTALLAT ION 1. Attach ROLL ASSY FEED 5 00 to SHAFT FEED s o that the hook on ROLL ASSY FEED 500 is facing the righ t side, and fas ten the hook on ROLL ASSY FEED 500 to the groo ve on SHAFT FEED . 2. Attach R OLL SUPPO RT 500 to S HAFT FEE D,[...]

CHAPTER 5 ADJUSTMENT[...]

EPSON AcuLaser C110 0 Rev is io n B ADJUSTMENT Overvie w 486 5.1 Overview This chapter explains the adjustment necessary to maintain the functions an d perform ance of the AcuLaser C1 100. 5.1.1 Ins tructions Before starting yo ur adjus tment wor k, always check the CAUTION on the r ight. 5.1.2 Part/unit-based adjustment items The following table i[...]

EPSON AcuLaser C110 0 Rev is io n B ADJUSTMENT Overvie w 487 5.1.3 Wr iting USB ID AcuLaser C1100 is equipp ed with a USB interface as a s tandard feature. The PC connected to the printer via the USB interface id entifies the printer by referring to the USB ID information specific to each prin ter. This USB ID information is stored on EEPROM on the[...]

EPSON AcuLaser C110 0 Rev is io n B ADJUSTMENT Overvie w 488 5.1.3.2 Writing Method The method of writing USB ID differs according to the condition of the main board. Referr ing to the following table, figure out what to d o dependi ng on th e conditions . Follow the instructio n s shown in the program to do the writings.  Store optio nal ID [...]

EPSON AcuLaser C110 0 Rev is io n B ADJUSTMENT Overvie w 489 5.1.4 Controll er Firmware Update This secti on explains a Contr oller firm ware update. NOTE: The computer shoul d be able to send binar y data under DOS via a parallel i nterface. 1. Prin t a status sheet, and check the current firmware version. 2. After turning the po wer off fo r both[...]

EPSON AcuLaser C110 0 Rev is io n B ADJUSTMENT Overvie w 490 5.1.5 MCU Fi rmware Update This secti on explains an MCU fi rm ware (engine fi rmware) update. NOTE: The computer shoul d be able to send binar y data under DOS via a parallel i nterface. 1. Prin t a status sheet or engine status sheet to check the curre nt MCU firmwar e version. (Refer t[...]

CHAPTER 6 MAINTENANCE[...]

EPSON AcuLaser C110 0 Rev is io n B MAINTENANCE Overview 492 6.1 Overview This section gives information necessar y for maintaining the prin ter in its optimum condition. In maintenance an d checks, never fail to observe the fo llowing precautions. W ARNI NG  To prevent an electric shock, bu rn, injury, etc., alway s turn the printer off and unp[...]

EPSON AcuLaser C110 0 Rev is io n B MAINTENANCE Overview 493 C A U T I O N  Since th is printer has many meta l parts , bewa re of the f rame edges and similar portions and be sure to we ar gloves to wo rk.  Do not disassemble the Toner Cartridge and the Photocond uctor Unit.  Do not expose the Photoco nduc tor Unit to direct sunlight. [...]

EPSON AcuLaser C110 0 Rev is io n B MAINTENANCE About On-sit e Servici ng 494 6.2 About On-site Servicing This secti on explai ns th e maintenan ce work to be done when you actually v isit the us er site. To prev ent possible accidents durin g maintenance work, strictly o bserve the servicin g warnin gs and cauti ons. Never p erform d angerous op e[...]

EPSON AcuLaser C110 0 Rev is io n B MAINTENANCE About On-sit e Servici ng 495 6.2.2 Details of O n-site Servicing This secti on explains the detai ls of on-s ite servicin g. What to Do First 1. Ask the user about the printer conditions.  Frequency of paper feedi ng errors (j ams)  How the prin ter has b een used (pap er type, pr inting frequ [...]

EPSON AcuLaser C110 0 Rev is io n B MAINTENANCE About On-sit e Servici ng 496 Preventive Maintenance (Co nsuma ble s/C ompo nent s n eeding periodic replacement) Do preventive maintenance work to mainta in the printer perfor mance and p revent failures fro m occurring . 1. After completion of repair or maintenance, print several status sheets and m[...]

EPSON AcuLaser C110 0 Rev is io n B MAINTENANCE Maintenance Menu 4 97 6.3 Maintenance Me nu This menu i s displa yed and select able onl y when a special oper ation perfor med at power-on to enter the maintenance mode. Basically, this menu is provided to be used by a service personnel for mainten ance. At the time of maintenance, print th e Engine [...]

EPSON AcuLaser C110 0 Rev is io n B MAINTENANCE Maintenance Menu 4 98 6.3.2 Entry into Maintenance Mode 1. Wh ile ho ldi ng down the [Back ], [U p], [Dow n] an d [Ent er] b utto ns, t urn th e prin ter on. When the printer is turned o n, all LEDs and LCD light and the following message is then displayed. (When “MAINTENANCE MODE” appears, releas[...]

EPSON AcuLaser C110 0 Rev is io n B MAINTENANCE Sheet fo r Servicing 499 6.4 Shee t for Servicing 6.4.1 Engi ne Status Sheet 6.4.1.1 Engine Status Sheet Items  Total Counts  Total Pag es : Total number of pages print ed to date.  Color Pages : Total number of pages p rinted in color to date.  Jam Coun ts : Number of occurrence of a jam.[...]

EPSON AcuLaser C110 0 Rev is io n B MAINTENANCE Sheet fo r Servicing 500  2nd BTR Offset  Normal : Settin g value of the transfer voltage for plain paper.  SemiThk : Settin g value of the transfer voltage for High q uality paper.  Thick : Setting value of t he transfer voltage for thick paper.  ExtraThk : S etting value of the transf[...]

EPSON AcuLaser C110 0 Rev is io n B MAINTENANCE Sheet fo r Servicing 501  Paper size: Indicated same as the panel display.  Paper t ype: Indicated as the specified value set for each media to control the engine. Note *1 : The date and ti me are ind icated in th e local tim e when generate d. (yy/ mm/dd hh :mm (The d ate and tim e is not re- c[...]

EPSON AcuLaser C110 0 Rev is io n B MAINTENANCE Sheet fo r Servicing 502 6.4.1.2 List of information managed and methods of management Table 6-3. Li st of info rma tion managed a nd methods of ma nagement Informatio n na me Count proc essing and stor age loca tio n Range Unit Count conditions Cle ar conditions Total P ages Color Pages Controller Co[...]

EPSON AcuLaser C110 0 Rev is io n B MAINTENANCE Sheet fo r Servicing 503 2nd BT R 2nd BTR Change En gine Controller 0 to 0 to 255 pages Times Duri ng p rinti ng Cou nt er cl ear Cou nt er c lea r (EEPROM initi alization) Develo pmen t Unit C Devel opment M De velopm ent Y Developm ent K Developm ent C Deve Change M Deve C hange Y Deve Change K Deve[...]

EPSON AcuLaser C110 0 Rev is io n B MAINTENANCE Sheet fo r Servicing 504 6.4.2 Pri nt Log Report 6.4.2.1 Print Log Report Items  S/N : Serial number of mai n unit  Date : yyyy/mm/ dd hh:mm (Local time) Not displayed when it is in asynchronous state.  Toner Remain  C Toner : Remaining amount of C toner [%]  M Toner : Remaining amount [...]

EPSON AcuLaser C110 0 Rev is io n B MAINTENANCE Sheet fo r Servicing 505 6.4.2.2 List of information managed and methods of management Note *1 Va lues in parentheses in the Clear Condition c olumn ar e cleared as a result. *2 If a va lue exceeds its ran ge, it is not guar anteed if it is cont ro lled by the con t roller. Table 6-4. Li st of info rm[...]

EPSON AcuLaser C110 0 Rev is io n B MAINTENANCE Co nsumables and Co mponents needi ng Periodi c Replacement 506 6.5 Consumables and Components needing Periodic Replac ement 6.5.1 Consumables C A U T I O N The print page-based service life values of the Consumables and Periodical Replacement Parts a re guidelines. The nu mber of prin table pages var[...]

EPSON AcuLaser C110 0 Rev is io n B MAINTENANCE Co nsumables and Co mponents needi ng Periodi c Replacement 507 6.5.2 Regular Replac ement Parts *1:The s ame functi on is also available i n the rese t menu. Table 6-6. Maintenance Information on Regular Repla cement Parts Part Nam e Part Code Life (Pages) Service lif e indication Part to be replaced[...]

EPSON AcuLaser C110 0 Rev is io n B MAINT ENANCE G lueing /Lubric ation 508 6.6 Glueing/Lubrication This secti on explains the part req uired gluein g and lub rication when per forming the service wor k, or repl acing the un it or part s. 6.6.1 Glueing There is no relevant glueing part for this unit.[...]

EPSON AcuLaser C110 0 Rev is io n B MAINT ENANCE G lueing /Lubric ation 509 6.6.2 Lubri cation The part requires lubrication for this unit is as below Parts Nam e CHUTE ASSY FSR Lubr icati on Part S prin g attached on the [CHUT E ASSY FSR] Types of oi l applied Parts Name : GREASE G76 Parts Numb er : 1 304691 Amou nt of lublicate About 5mm Note Lub[...]

CHAPTER 7 APPENDIX[...]

EPSON AcuLaser C110 0 Rev is io n B APPENDIX Connector s 511 7.1 Connector s This section shows the con nector locations of EPSON AcuLaser C1100. [P] an d [J] represent “p lug” and “jack”, respectively. 7.1.1 The L ist of Plugs and Jacks IOT Table 7-1 . IOT P/J Location Remarks 1 G-156 Connects PWBA FUSER CO NT and HARNES S ASSY MAIN 2 G-15[...]

EPSON AcuLaser C110 0 Rev is io n B APPENDIX Connector s 512 DUP 430 E-1 09 Conne cts PWB ASSY ROT and HARNESS ASS Y MAIN 431 F-1 38 Connects SENS OR ASSY ADC and HARNESS ASSY ADC 432 D-109 Conne cts PWB ASSY ROT and HARNESS ASSY MAIN 433 D-109 Connects PWB ASSY ROT and PWB ASSY MOT 500 H-153 Connects LV/HVPS and FFC-ASSY LV/MCU 501 I-152 Connects [...]

EPSON AcuLaser C110 0 Rev is io n B APPENDIX Connector s 513 500 F EEDER 7.1.2 P/J Layout Diagram Figure 7-1. I OT P/J L ayout Diagra m (1) Table 7- 3. 500 FEE DER P/J Location Remar ks 119 E-307 Connects SENSOR NO PAPER and HARNESS ASSY FEED3 120 D-307 Connec ts SENSOR T/R (P120) and HARNESS ASSY FEED3 121 C-308 Connects SWITCH FEEDER DOOR and HAR[...]

EPSON AcuLaser C110 0 Rev is io n B APPENDIX Connector s 514 Figure 7- 2. IOT P/J L ayout D iagram (2) Figure 7-3. I OT P/J L ayout Diagra m (3) 604 603 605 103 100 202 101 102 203 A 11 7 11 8 11 9 120 121 122 123 124 125 126 127 128 129 130 11 6 BCDEFGH I J K L Leg_Sec04_002EA 126 617 431 1 1 1 620 1 12 1 13 601 607 602 621 A 132 133 134 135 136 1[...]

EPSON AcuLaser C110 0 Rev is io n B APPENDIX Connector s 515 Figure 7- 4. IOT P/J L ayout D iagram (4) Figure 7-5. DUP P/J L ayout D iagram 501 515 504 503 508 509 502 500 608 3 2 1 CN501 CN405 CN601 CN502 400 415 412 403 404 405 421 420 41 1 413 409 406 416 414 422 418 417 401 410 408 407 600 128 201 200 A 147 148 149 150 151 152 153 154 155 156 1[...]

EPSON AcuLaser C110 0 Rev is io n B APPENDIX Connector s 516 Figure 7-6. 500 FE EDER P/ J Layout Diagram 121 608 618 120 1 19 446 609 610 4358 436 435 437 440 A 302 303 304 305 306 307 308 309 310 31 1 312 313 314 315 301 BCDEFGH I J K L Leg_Sec04_006EA[...]

EPSON AcuLaser C110 0 Rev is io n B APPENDIX Wiring Connect ion Diag rams 517 7.2 Wiring Connection D iagrams 7.2.1 Marks used in the Overall Wiring Connection Diagram The table below shows how to interpret the Overall Wiring Connection Diagrams. Table 7-4. List o f the Marks Name o f sign al line Remarks Indicates a co nne ction between part s by [...]

EPSON AcuLaser C110 0 Rev is io n B APPENDIX Wiring Connect ion Diag rams 518 7.2.2 Overall W iring Connection Diagrams Figure 7-7. Overa ll Wi ring Connect ion Diagrams PWBA FUSER CONT PL12.2.12 P/J1 P/J2 P/J3 P/J4 PWBA MCU PL12.2.1 P/J401 PWBA ESS PL12.2.7 P/J400 CN601 CN501 OP PANEL PL1.1.17 CN405 CN1 ROS ASSY PL8.1.1 CN502 P/J602 P/J407 PWBA DU[...]

EPSON AcuLaser C110 0 Rev is io n B APPENDIX Wiring Connection Diagram be tween Parts 519 7.3 Wiri ng Conn ection Diagram between Parts 7.3.1 Marks used in the D iagram and Ins tructions for Use The table below shows how to interpret the Wiring Co nnection Diagram between Parts. Commonly u sed marks and symb ols are omitted her e. Table 7-5. List o[...]

EPSON AcuLaser C110 0 Rev is io n B APPENDIX Wiring Connection Diagram be tween Parts 520 7.3.2 Composi tion of the Wiring Connection Diagram between Parts The Overall Wiring Connection Diagram is divided into 11 sections as shown below to indicate the detailed conn ection between parts. 1. DC POWER SUPPLY (p 522)  Connection between PWBA MCU an[...]

EPSON AcuLaser C110 0 Rev is io n B APPENDIX Wiring Connection Diagram be tween Parts 521 7. DEVELOPER (p 528)  Connection between PWBA MCU and SWITCH FRONT-DOOR  Connection between PWBA MCU and SENSOR HUM & TEMP  Connection between PWBA MCU and PWBA CRUM  Connection between PWBA MCU and MOT ASSY MAG  Connection between PWBA MCU [...]

EPSON AcuLaser C110 0 Rev is io n B APPENDIX Wiring Connection Diagram be tween Parts 522 1. DC POWER SUPPLY  Overcurrent Protection All outputs (+24VDC, +5VDC, +3.3VDC) from LV/HVPS are stopped when short-circuiting on the way to the earth or ground. Each output is restored by eliminating the cause of the short-circuit, and turning the print e [...]

EPSON AcuLaser C110 0 Rev is io n B APPENDIX Wiring Connection Diagram be tween Parts 523 2. MSI& REGI Figure 7-9. M SI&REGI Connection and Wiring Diagram Name of sign al line Remar ks PAPER EMPTY SENSED (H) +5VDC Paper detection signal fo r MSI generated by Sens or Ph oto (No Pap er Se nsor) P/H MOTER ON (H)+3.3VDC P/H MO TER PW M P/H MO T[...]

EPSON AcuLaser C110 0 Rev is io n B APPENDIX Wiring Connection Diagram be tween Parts 524 3. FEED ER (500 ) Figure 7-10. FEEDER (500 ) Connection and Wiring Diagram Name of sign al line Remar ks TRAY SENSOR RXD TXD PWBA TRAY CONT. control signal FEED MOTOR ON (H)+ FEEDER MOTOR contro l signal FEED CL ON (L)+24VDC Feed Clutch ON/OFF sign al DOOR SW [...]

EPSON AcuLaser C110 0 Rev is io n B APPENDIX Wiring Connection Diagram be tween Parts 525 4. RO S Figure 7-11. ROS Co nnect ion and Wiring Diag ram Name of sign al line Remar ks ESS DAT A- ESS DAT A+ Image signal from Controller MCU DATA- MCU DATA+ Image signal from MCU PCONT LASER ON (L)+5VDC VREF PWBA LD contr ol sign al in R OS AS SY SCANNER MOT[...]

EPSON AcuLaser C110 0 Rev is io n B APPENDIX Wiring Connection Diagram be tween Parts 526 5. XEROGRAPHIC Figure 7-12. XEROGRAPHIC Connection and Wiring Diagram Name of sign al line Remar ks IBT BRUSH MOT ON IBT BRUSH MOT PWM IBT BRUSH MOT TG IBT BRUSH MOT CW /CCW IBT Brush Moto r drive control signal IBT CLEN RET MOT START IBT CLEN RET MOT PWM IBT [...]

EPSON AcuLaser C110 0 Rev is io n B APPENDIX Wiring Connection Diagram be tween Parts 527 6. HIGH VOL TAGE Figure 7-13. HIGH VOLTAGE Connection and Wiring Diagram Name of sign al line Remar ks 1st BTR CONT 1st BTR Bias v oltage con trol signal IBT CLEANER H/L 1BT CL EANER Bias vo ltage control si gnal BCR CONT BCR Bias voltage co ntrol signal DE-TO[...]

EPSON AcuLaser C110 0 Rev is io n B APPENDIX Wiring Connection Diagram be tween Parts 528 7. DEVELOPER Figure 7-14. DEVELOPE R Connectio n and W iring Di agram Name of sign al line Remar ks MAG ROLL MOT ON MAG ROLL MOT PWM MAG ROLL MOT TG MAG ROLL MOT CW/CCW Magnet Roll Motor drive contro l signal TEM P. Tempe rature data (analo g valu e) ins ide p[...]

EPSON AcuLaser C110 0 Rev is io n B APPENDIX Wiring Connection Diagram be tween Parts 529 8. 2ND BTR Figure 7-15. 2nd BTR Connecti o n an d Wiri n g Diagr am Name of sign al line Remar ks FUSER IN SENSED (L)+5VDC 2nd BTR paper detec tion si gnal gen e r ated by Sens or Ph oto (F user In Sen sor) RETRACT SENSED (H)+5VDC 2 nd B TR retract detectio n [...]

EPSON AcuLaser C110 0 Rev is io n B APPENDIX Wiring Connection Diagram be tween Parts 530 9. FUSE R Figure 7-16. FUSE R Connection an d Wiri ng Diagram Name of sign al line Remar ks FUSER MOT ON (H)+ 3.3VDC FUSE R MOT PWM FUSE R MO T TG FUSER MOT CW/CCW Fuser Motor drive control signal RL Temper at ure da ta (ana lo g va lu e) of H eat Roll surface[...]

EPSON AcuLaser C110 0 Rev is io n B APPENDIX Wiring Connection Diagram be tween Parts 531 10. CONTROLLER Figure 7-17. CONTROLLER Con nectio n an d Wirin g Diag ram PWBA ESS PL12.2.7 CN601 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 CN501 1 2 3 4 5 6 P/J400 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 P/J501 1 2 3 4 5 6 CN405 CN1 PWBA MCU PL12.2.1 LV/HVPS PL12[...]

EPSON AcuLaser C110 0 Rev is io n B APPENDIX Wiring Connection Diagram be tween Parts 532 11. DUPLEX Figure 7-18. DUPLEX Connection and Wiring Diagram Name of sign al line Remar ks DUPLEX START DUPLEX READY FUSE R EXI T SE NSOR PRE REGI CLUTCH TXD RXD PWBA DUP control signal LOW PA SS SE N SED (L)+5 VDC Paper detection signal for Tra nsport sectio [...]

EPSON AcuLaser C110 0 Rev is io n B APPENDIX Unpackin g the Print er 533 7.4 Unpa cking the P rinter After unpacking , make sure that there is no missing component, and check the appearance. Then remove all tapes and protection materials.  Printer Main Unit  500-Shee t Pap er Cass et te Unit  Duplex Print Unit C A U T I O N  Carry ing t[...]

EPSON AcuLaser C110 0 Rev is io n B APPENDIX Parts Lis t 534 7.5 Part s L is t MAIN UNIT Table 7- 6. MAIN UN IT No. Part Name 01-01-02 TRAY EXTENS ION 01-01-03 COVER TOP 01-01-04 COVER HUSER 01-01-05 COVER TOP SIDE L 01-01-06 COVER TOP SIDE R 01-01-07 SW ITC H ASS Y TOP 01-01-10 COVER CLEANER 01-01-10 0 “LOGO PLATE,13X54;C” 01-01-12 FOOT REAR 0[...]

EPSON AcuLaser C110 0 Rev is io n B APPENDIX Parts Lis t 535 04-01-23 SOLENOID PICK UP 04-01-24 SENSOR UPPER PASS 04-01-25 ACUTUATOR EMPTY 04-01-26 H ARN ESS- ASS Y P/ H1 05-01-01 COVER-PH 05-01-02 CHUTE AS SY-REAR 05-02-01 FRAME ASSY-PH 05-02-02 CLUTCH ASSY REGI 05-02-06 GEAR-REGI 05-02-08 RO LL REGI R UBBER 05-02-11 VARISTOR 05-02-12 ROLL ASSY-PR[...]

EPSON AcuLaser C110 0 Rev is io n B APPENDIX Parts Lis t 536 09-01-01 LATCH ASSY-ROTARY 09-01-04 LEVER LATCH 09-01-10 ANTENNA ASSY-CTRG 09-01-15 LEVER CTR G SET 09-01-17 HOLD ER ASS Y-B IAS 09-01-18 SENSOR UPPER PASS 09-01-20 WIRE ASSY DEVE 09-02-05 HOUSING ASSY-DEVE K 09-02-06 HOUSING ASSY-DEVE Y 09-02-07 HOUSING ASSY-DEVE M 09-02-08 HOUSING ASSY-[...]

EPSON AcuLaser C110 0 Rev is io n B APPENDIX Parts Lis t 537 DUPLEX UNIT Table 7-7. DUPLEX UNIT No. Part Name 01-01-02 COVER-R DUP 01-01-03 COVER-L DUP 01-01-04 SCREW THUMB 01-01-06 COVER CONNECTOR 01-02-01 COVER INV 01-02-03 LINK-BUTTON 01-02-04 SPRING-LINK 01-02-05 INVERTER ASSY DUP 01-02-07 SOLENOID ASSY DUP 01-02-08 SPRING ACTUATOR 01-02-09 ACT[...]

EPSON AcuLaser C110 0 Rev is io n B APPENDIX Parts Lis t 538 500-S HEET P APER C ASSETTE UNIT Table 7-8. 500-SHEET PAPER CASSETTE UNI T No. Part Name 01-01- 01 500 P APER C ASSETTE ASSY 01-01 -02 GUIDE END A SSY 01-01-04 GUIDE PAPER L ASSY 500 01-01 -05 PINION 12 01-01-06 GUIDE PAPER R ASSY 500 01-01 -09 LOCK LIFT R 01-01-1 0 ROLL LINK 01-01 -12 CO[...]

EPSON AcuLaser C110 0 Rev is io n B APPENDIX Exploded Di agrams 5 39 7.6 E xplode d Diagram s[...]

01-01-100 Rev.01 C567 FOR EPSON AcuLaserC1100 NO.1-1 The parts to which no reference number is assigned will not be available as after-sale service parts. C567-CASE-001 01-01-99 01-01-36 01-01-34 01-01-22 01-01-28 01-01-32 01-01-13 01-01-18 01-01-17 01-01-16 01-01-15 Front 01-01-13 01-01-12 01-01-12 01-01-06 01-01-05 01-01-04 01-01-20 01-01-21 01-0[...]

Rev.01 C567 FOR EPSON AcuLaserC1100 NO.12-2 The parts to which no reference number is assigned will not be available as after-sale service parts. C567-ELEC-001 C C B B A A Front 12-02-01 12-02-09 (Only C567041) 12-02-08 12-02-07 12-02-05 12-02-04 12-02-03 12-02-02 Leg_Sec005_013EB 12-02-13 12-02-12 12-02-10[...]

B B A Front Rev.01 C567 FOR EPSON AcuLaserC1100 NO.4-1 The parts to which no reference number is assigned will not be available as after-sale service parts. C567-MECH-001 All this page including 04-01-01 04-01-16 04-01-15 04-01-02 Leg_Sec005_002EB 04-01-17 04-01-26 04-01-25 04-01-24 04-01-23 04-01-20 04-01-22 04-01-13 04-01-09 04-01-12 04-01-11 04-[...]

Front FOR EPSON AcuLaserC1100 NO.5-1 Rev.01 C567 The parts to which no reference number is assigned will not be available as after-sale service parts. C567-MECH-002 Leg_Sec005_003EB [Ref PL5.2.1] 05-01-02 05-01-01[...]

D D A A C C B B Front Rev.01 C567 FOR EPSON AcuLaserC1100 NO.5-2 The parts to which no reference number is assigned will not be available as after-sale service parts. C567-MECH-003 All this page including 05-02-01 Leg_Sec005_004EB 05-02-25 05-02-24 05-02-08 05-02-23 05-02-22 05-02-21 05-02-20 05-02-19 05-02-18 05-02-17 05-02-16 05-02-12 05-02-11 05[...]

C Front Rev.01 C567 FOR EPSON AcuLaserC1100 NO.6-1 The parts to which no reference number is assigned will not be available as after-sale service parts. C567-MECH-004 06-01-06 06-01-07 06-01-27 06-01-15 06-01-01 06-01-04 06-01-08 06-01-16 06-01-30 06-01-29 06-01-26 06-01-22 06-01-21 06-01-20 06-01-18 06-01-13 06-01-12 06-01-03 Leg_Sec005_005EA E E [...]

Front F E D D A C C B B Rev.01 C567 FOR EPSON AcuLaserC1100 NO.7-1 The parts to which no reference number is assigned will not be available as after-sale service parts. C567-MECH-005 Leg_Sec005_006EB 07-01-27 07-01-20 07-01-13 07-01-04 07-01-12 07-01-27 07-01-16 07-01-15 07-01-24 07-01-30 07-01-31 07-01-33 07-01-32 07-01-02 E F A[...]

Front Rev.01 C567 FOR EPSON AcuLaserC1100 NO.8-1 The parts to which no reference number is assigned will not be available as after-sale service parts. C567-MECH-006 08-01-02 08-01-05 Leg_Sec005_007EB 08-01-01[...]

Front Rev.01 C567 FOR EPSON AcuLaserC1100 NO.9-1 The parts to which no reference number is assigned will not be available as after-sale service parts. C567-MECH-007 Leg_Sec005_008EB 09-01-18 09-01-15 09-01-20 09-01-17 09-01-04 09-01-10 09-01-01[...]

Front Rev.01 C567 FOR EPSON AcuLaserC1100 NO.9-2 The parts to which no reference number is assigned will not be available as after-sale service parts. C567-MECH-008 09-02-13 09-02-10 09-02-13 09-02-10 09-02-11 09-02-11 09-02-11 09-02-11 09-02-10 09-02-10 09-02-09 09-02-08 (with 11) 09-02-07 (with 11) (with 11) 09-02-06 (with 11) 09-02-05 Leg_Sec005[...]

Rev.01 C567 FOR EPSON AcuLaserC1100 NO.10-1 The parts to which no reference number is assigned will not be available as after-sale service parts. C567-MECH-009 Leg_Sec005_010EB 10-01-06 10-01-02 10-01-01 Front[...]

Front 11-01-09 Rev.01 C567 FOR EPSON AcuLaserC1100 NO.11-1 The parts to which no reference number is assigned will not be available as after-sale service parts. C567-MECH-010 Leg_Sec005_011EA 11-01-07 11-01-06 11-01-04 11-01-05 11-01-03 11-01-02 11-01-01[...]

Rev.01 C567 FOR EPSON AcuLaserC1100 NO.12-1 The parts to which no reference number is assigned will not be available as after-sale service parts. C567-MECH-011 Leg_Sec005_012EB 12-01-06 12-01-09 12-01-10 12-01-11 Front[...]

Front Rev.01 FOR DUPLEX UNIT NO.1-1 The parts to which no reference number is assigned will not be available as after-sale service parts. C802-OPTI-049A Leg_Sec005_014EB 01-01-03 01-01-04 01-01-04 01-01-06 01-01-02 [Ref PL1.3.1] [Ref PL1.2.1][...]

Rev.01 FOR DUPLEX UNIT NO.1-2 The parts to which no reference number is assigned will not be available as after-sale service parts. C802-OPTI-050A Leg_Sec005_015EA 01-02-28 01-02-23 01-02-29 01-02-29 01-02-23 01-02-21 01-02-20 01-02-18 01-02-17 01-02-16 01-02-15 01-02-10 01-02-09 01-02-08 01-02-07 01-02-04 01-02-03 01-02-01 01-02-22 01-02-05 Front [...]

Rev.01 FOR DUPLEX UNIT NO.1-3 The parts to which no reference number is assigned will not be available as after-sale service parts. C802-OPTI-051A 01-03-03 01-03-32 01-03-30 01-03-30 Leg_Sec005_016EB (with RING KL) 01-03-99 (with RING KL) 01-03-99 01-03-24 01-03-01 01-03-25 01-03-25 01-03-22 01-03-23 [Ref PL1.4] 01-03-10 01-03-09 01-03-12 01-03-11 [...]

Front Rev.01 FOR DUPLEX UNIT NO.1-4 The parts to which no reference number is assigned will not be available as after-sale service parts. C802-OPTI-052A Leg_Sec005_017EA 01-04-07 01-04-07 01-04-14 01-04-13 01-04-09 01-04-08 01-04-08 01-04-07 01-04-07 01-04-06 01-04-10 01-04-17 01-04-01[...]

Rev.01 FOR 500-Sheet Paper Cassette Unit NO.1-1 The parts to which no reference number is assigned will not be available as after-sale service parts. C802-OPTI-053A Leg_Sec005_018EA All this page including 01-01-05 01-01-02 01-01-06 01-01-14 01-01-10 01-01-12 01-01-10 01-01-09 01-01-05 01-01-04 Front[...]

Rev.01 The parts to which no reference number is assigned will not be available as after-sale service parts. C802-OPTI-054A Leg_Sec005_019EA [Ref PL1.1.1] [Ref PL1.3.1] 01-02-10 01-02-01 01-02-02 Front FOR 500-Sheet Paper Cassette Unit NO.1-2[...]

Rev.01 FOR 500-Sheet Paper Cassette Unit NO.1-3 The parts to which no reference number is assigned will not be available as after-sale service parts. C802-OPTI-055A Leg_Sec005_020EA 01-03-34 01-03-32 [Ref PL1.4.1] 01-03-21 01-03-22 01-03-20 01-03-21 01-03-20 01-03-26 01-03-20 01-03-20 01-03-18 01-03-16 01-03-29 01-03-24 01-03-23 01-03-08 01-03-04 0[...]

Rev.01 FOR 500-Sheet Paper Cassette Unit NO.1-4 The parts to which no reference number is assigned will not be available as after-sale service parts. C802-OPTI-056A Leg_Sec005_021EB 01-04-15 01-04-14 01-04-11 01-04-07 01-04-06 01-04-05 01-04-04 01-04-03 All this page including 01-04-01 Front[...]

EPSON AcuLaser C110 0 Rev is io n B APPENDIX Circuit Dia grams 561 7.7 Circ uit Diag rams  C567M AIN ( Tota l: 4 pa ge s)[...]

Model : AcuLaser C1 100/LP-V500 Board : C567MAIN Sheet : 1 of 4 Rev . : A[...]

Model : AcuLaser C1 100/LP-V500 Board : C567MAIN Sheet : 2 of 4 Rev . : A[...]

Model : AcuLaser C1 100/LP-V500 Board : C567MAIN Sheet : 3 of 4 Rev . : A[...]

Model : AcuLaser C1 100/LP-V500 Board : C567MAIN Sheet : 4 of 4 Rev . : A[...]