Exmark OCDWB01 manuale d’uso

OCDWB01 OPERA TOR CONTROLLED DISCHARGE FOR W ALK-BEHIND UNITS Part No. 4500-569 Rev . A[...]

Exmark reser ves the right to make changes or add improv ements to its products at an y time without incurring any obligation to make such changes to products man ufactured previousl y . Exmark, or its distributors and dealers, accept no responsibility f or v ariations which may be evident in the actual specications of its products and the state[...]

Introduction CONGRATULATIONS on the purchase of your Exmark equipment. This product has been carefully designed and man ufactured to gi ve y ou a maxim um amount of dependability and years of trouble-free operation. This man ual contains operating, maintenance , adjustment, and safety instr uctions for y our Exmark equipment. BEFORE OPERATING Y OUR[...]

Contents Introduction . . . . . .. . . . . . . . . . . .. . . . . . . . . . . .. . . . . . . . . . . .. . . . . . . . . . .. .. . . . 3 Safety . . .. . . . . . . . . . .. .. . . .. .. . . .. .. . . .. . . . . . . . . . . .. . . . . . . . . . .. .. . . .. .. . . .. . 5 Safety Alert Symbol . . .. . . . . . . . . . .. .. . . .. .. . . .. .. . . .. . .[...]

Safety Safety Safety Alert Symbol This Safety Alert Symbol (Figure 1) is used both in this man ual and on the mac hine to identify important safety messages which m ust be follow ed to av oid accidents This symbol means: ATTENTION! BECOME ALERT! Y OUR SAFETY IS INV OL VED! Figure 1 1. Safety alert symbol The safety alert symbol appears abov e infor[...]

Safety collection system or m ulch kit in place and w orking properly . • Stop engine, wait for all mo ving parts to stop , remov e key and engag e parking brake: – Before c hecking, cleaning or w orking on the mow er . – After striking a foreign object or abnor mal vibration occurs (inspect the mo wer for damage and make repairs before resta[...]

Safety Safety and Instructional Decals • Keep all safety signs legible . R emo ve all grease, dirt and debris from safety signs and instr uctional labels . • R eplace all w orn, damag ed, or missing safety signs . • When replacement components are installed, be sure that current safety signs are afx ed to the replaced components . • If a[...]

Setup Setup Assembling Discharge Deector to OCDWB01 Insert the rod through the rst tab on the gate link frame, disc harge deector , and second tab on the gate link frame (Figure 2). Orient and install the spring so that the loop will rest in the notch on the disc harge deector . Continue to push the rod into the linkage cov er . Orient [...]

Setup Figure 5 1. Latch 3. Front pin 2. OCDWB01 assembly 4. Slot • If the front pin does not engag e in the slot in the deck, loosen or completely remov e the hardware in the g ate link frame as shown in Figure 6. P osition the g ate link frame so that the front pin aligns with the slot. R einstall hardware , if remov ed, and tighten. Piv ot the [...]

Setup there will be room to tighten the n ut on the upper hole, on the underside of the front panel. C. Drill tw o 11/32 inc h diameter holes on the front panel as sho wn in Figure 7. D . Align the tw o holes in the mounting brack et with the front panel of the unit. Install 5/16-18 x 5/8 inc h car riage bolt through the upper hole and secure with [...]

Setup B . Align the existing hole at the rear of the unit with the right hole on the brac ket. C. P osition the brac ket horizontally or with the narrow end pointed slightly downw ard. D . Using the mounting brac ket as a template , mark the left hole location onto the side panel of the unit and drill 11/32 inc h diameter hole (see Figure 11). Figu[...]

Product Overview Figure 14 1. V elcro strap 2. Loom clip Product Overview Figure 15 1. Handle 2. Discharge gate (under discharge deector) 3. Discharge deector 12[...]

Operation Operation Use the discharge gate to temporarily stop or deect g rass clippings aw ay from sidew alks , parking lots , patios , or anywhere grass clippings are not desired to be discharged. The handle allo ws the discharge gate to be held in any position from fully closed to fully open. Important: Make sure the mower is in neutral befor[...]

Operation Closing the Discharge Gate F or all W alk-Behind Units ex cept V antage: Push down on the handle to close the gate. Figure 18 1. Push down 2. Handle in gate closed position F or V anta ge Units: Push forw ard on the handle to close the gate. Figure 19 1. Push forward 2. Handle in gate closed position Removing the OCDWB01 1. R emov e and r[...]

Operation Figure 21 1. Handle assembly 3. Clevis pin 2. Mounting bracket 4. Hairpin 4. Unloc k the assembly and pi v ot it aw ay from the mow er deck. Lift the OCD WB01 out of the dec k mounting tube . 5. Lo wer the existing discharge deector . Important: Reinstall the original discharge deector if it w as remov ed during the OCDWB01 installa[...]

Maintenance Maintenance Note: Deter mine the left and right sides of the machine from the normal operating position. W ARNING While maintenance or adjustments are being made, someone could star t the engine. Accidental star ting of the engine could seriously injure y ou or other bystanders. Remo ve the k ey from the ignition s witch, engage parking[...]

Maintenance Figure 22 1. Pivot bolt and nut Discharge Gate Adjustment The disc harge gate is properly adjusted in the closed position when the discharge gate is at ag ainst the discharge opening . If the disc harge gate does not close at follo w the steps below: 1. Stop engine, wait for all mo ving parts to stop , and remov e key . Engag e pa[...]

T roubleshooting T roubleshooting Important: It is essential that all operator safety mechanisms be connected and in proper operating condition prior to mow er use. The following table lists some of the common causes of trouble . If assistance is needed, contact y our Exmark Ser vice Dealer . Problem Possible Cause Cor rectiv e Action 1. Discharge [...]

Conditions and Products Co vered Exmark Mfg. Co. Inc. and its aff iliate, Exmark W arranty Company , pursuant to an agreement between them, jointly warrant on the terms and conditions herein, that we will repair , replace or adjust any part on these products and found by us (in the ex ercise of our reasonable discretion) to be defective in factory [...]

MID-MOUNT RIDING A CCESSORIES AND OPTIONS SEE EXMARK’S COMPLETE LINE OF A CCESSORIES AND OPTIONS W ALK-BEHIND A CCESSORIES AND OPTIONS GRASS CA TCHER MICRO-MULCH SYSTEM TURF STRIPER ST ANDON CUST OM RIDE SEA T SUSPENSION SYSTEM FULL SUSPENSION SEA T DECK LIFT ASSIST KIT HITCH KIT LIGHT KIT 12 V PO WER POR T MICRO-MULCH SYSTEM OPERA T OR CONTROLLE[...]