Extron electronic PVS 305SA manuale d’uso

PoleV ault ® Systems (featuring the PVS 305SA) Installation Guide 68-1691-01 Rev . A 08 09 ALSO AV AILABLE: The P oleV ault ® System Installation Video. View it at www .extr on.com.[...]

This symbol is intended to alert the user of important operating and maintenance (servicing) instructions in the literature provided with the equipment. This symbol is intended to alert the user of the presence of uninsulated dangerous voltage within the product’ s enclosure that may present a risk of electric shock. Caution Read Instructions •[...]

1-1 PoleV ault Systems Installation • Introduction Intr oduction Overview This guide covers the installation of the Extron PoleV ault ® System in a drop ceiling r oom with a wood or concrete structural ceiling. If the location has a concrete or beam style ceiling, alternative ceiling mounts can be obtained separately from Extr on ( see 2c, "[...]

PoleV ault Systems Installation • Introduction 1-2 Intr oduction, cont'd PVS 305SA POLEV AU LT SWITCHER INPUT SELECTION 1 2 PEAK NORMAL SI GN AL CONFIG 3 4 5 AUX AUDIO AUDIO LEVEL ADJUST PA GING SENSOR SENSITIVITY VO ICELIFT MI C PEA K NORMAL SIGNAL INPUT Ceiling Mounted Paging Spea ke r Extron Priority Page Sensor (Optional Accessory) Fr om[...]

1-3 PoleV ault Systems Installation • Introduction — Planning Befor e you Begin Installation - Planning Before installation is started, several major factors must be consider ed to ensure that the installation pr ocess is as smooth and trouble fr ee as possible, and that the final finished project meets the needs of the customers, users, audi[...]

PoleV ault Systems Installation • Introduction — Planning 1-4 Intr oduction — Planning, cont’d • Lighting  T ype and contr ol (important for projector image viewing)  Ambient light from windows Student Desks Teacher’s Desk TV / VCR / DVD Inputs Screen/White Board Location Windows MLC Controller Location PVT A/V Wallplate Location [...]

1-5 PoleV ault Systems Installation • Introduction — Planning c. Location of MediaLink ® Contr oller and W all Plates • Forward and side r each (for full details refer to a copy of "ADA Standards for Accessible Design", "Section 4-2", "Space Allowance and Reach Ranges" ) 30" (76 cm) 10" (25.5 cm) Max 5[...]

PoleV ault Systems Installation • Introduction — Inventory Overview 1-6 Intr oduction — Inventory Overview UPB 25 White 60-773-03 UPB 25 Universal Projector Bra cke t (4)T ur nbuc kles (5) Lag ey e bolts (5) Concrete anchors (2) Cable clamps , Gal Steel (1) Safety wire (15 ft . 1/8 in. dia) (2) Tie wire (30 ft., 14 A WG) (4) T -frame scre ws [...]

1-7 PoleV ault Systems Installation • Introduction — Inventory Overview P oleV ault System 42-108-03 (or 42-109-03*, or 42-110-03*) MLC 104 IP Plus MediaLink Controller MLC 104 IP Plus White 60-818-03 (1) Mud ring (8) Mud ring screws (8) Replacement screws (2) F aceplates - (1) White (on unit) (1) Black MLC 104 IP Plus PVS 305SA 60-986-01 PVS 3[...]

Intr oduction — Inventory Overview , cont’d 1-8 PoleV ault Systems Installation • Introduction — Inventory Overview 1-8 b. Items not included The following items are not included. However , input and display devices are essential parts of the system, and at any installation they may vary depending on their use. This list suggests various de[...]

1-9 PoleV ault Systems Installation • Introduction — Inventory Overview 1-9 d. Installation tools T o aid the professional installer , this checklist gives the tools recommended to complete the installation. T ools should include, but are not confined to: • Laser level, or two levels (large for screen installation, small for wall plates and [...]

PoleV ault Systems Installation • Installation 2-1 Installation Overview This overview outlines the basic steps for installing the PoleV ault System. Detailed description of these steps is given in five sections, Stages One though Five. N Additional installation hardware is needed and should be supplied by the installer . See Introduction, “It[...]

PoleV ault Systems Installation • Installation — Stage 1 2-2 Stage One — Install the Scr een and Pr ojector Stage 1 This stage involves installing the three pieces of har dwar e shown below . Slotted Pipe Slotted Pipe (supplied with PCM 340) Where it goes: Attaches to structural ceiling, rests on suspended ceiling. What it does: Holds slotted[...]

PoleV ault Systems Installation • Installation — Stage 1 2-3 Installation — Stage One, cont’d 1. Mark screen location a. Mark the center line and the outer edges of the screen. T When marking the location of screens, devices, or the site for installing transmitters and MediaLink control devices, use painters tape to avoid wall surface damag[...]

2-4 PoleV ault Systems Installation • Installation — Stage 1 e. Using suitable screws, mount the pr ojector onto the projector bracket, i.e., the lower portion of the UPB 25 as shown in step 2e ’s image. Align it so the security flange is at the rear . A minimum of three arms need to be attached to the projector . Adjust the arms to fit as [...]

PoleV ault Systems Installation • Installation — Stage 1 2-5 Installation — Stage One, cont’d 4. Cut the ceiling tile a. Mark the location of the PCM 340 on the T -frame. This aids putting it back in the correct location when the tile is replaced. T Mark the screen dir ection on back of the tile (e.g. with an arrow or “to fr ont”) to he[...]

2-6 PoleV ault Systems Installation • Installation — Stage 1 6. Finish Projector Dr op Ceiling Mount installation a. Detach the projector bracket/pr ojector from the adjuster plate. Do not remove the pr ojector bracket from the projector . b. Unscrew the UPB 25 adapter plate fr om the mounting pole. c. Loosen the set screws on the PCM 340 and t[...]

PoleV ault Systems Installation • Installation — Stage 1 2-7 Installation — Stage One, cont’d 8. Install the electrical box (if requir ed) W All electrical installation should be performed by qualified personnel in accordance with local and national building codes, fire and safety codes, and local and national electrical codes. If requir [...]

2-8 Stage T wo — Install the W all Plates and MLC 104 IP Plus Stage 2 This stage involves installing the devices shown below . A udio and Video Output Po rt (at rear) PVT CV D PVT RGB D Plus AUDIO IN L R VIDEO IN IR OUT S G COMPUTER IN AUDIO IN OUT MONI TO R OUT IR OUT S G AUDIO IN L R VIDEO IN IR OUT S G Decora F aceplate Mounting Screws (2) IR [...]

PoleV ault Systems Installation • Installation — Stage 2 2-9 Installation — Stage T wo, cont’d PVT transmitter installation • CA T 5 T568A signal transmission cables (connects PVT input wallplates to PVS 305SA switcher) MLC 104 IP Plus installation • MLC power and RS-232 control cable (connects the MLC contr oller to the MLC/Power contr[...]

2-10 PoleV ault Systems Installation • Installation — Stage 2 N The installation must conform to national and local building and electrical codes, and UL requir ements. Refer to the devices’ user manuals for details. 1. Install the mud rings N These devices can be installed using the supplied mud ring or a wall box. If installing a box, allow[...]

PoleV ault Systems Installation • Installation — Stage 2 2-11 Installation — Stage T wo, cont’d 2. Pull the cables (at the input locations) The following cables need to be installed: • CA T 5 cables for signal transmission from the A/V wall plates to the PVS 305SA N For PVT RGB D and PVT RGB D Plus wall plates, two CA T 5 signal cables fo[...]

2-12 PoleV ault Systems Installation • Installation — Stage 2 3. Install wall plates a. Connect the CA T 5 cables to the rear of the input devices (for RGB devices, connect cable labeled A to port A and cable B to port B). b. If desired, for PVT RGB D Plus plates, use a thr ee conductor audio cable and connect the audio return to the connector [...]

PoleV ault Systems Installation • Installation — Stage 2 2-13 Installation — Stage T wo, cont’d 4. Install MediaLink Controller T Before cabling and installing the MLC 104 IP Plus, locate and write down the MAC address of the device for configuring the IP address. The 12 character alphanumeric address (e.g., 00-05-A6-03-9G-H4) can be found[...]

2-14 PoleV ault Systems Installation • Installation — Stage 2 b. Connect the IR/RS-232 projector communication cable as shown for either RS-232 or IR projector contr ol. N Some projectors r equire NULL connection wiring, which inverts the Tx and Rx connections. See the projector manufactur er ’ s manual for details. c. T o use the MLC 104 IP [...]

PoleV ault Systems Installation • Installation — Stage 2 2-15 Installation — Stage T wo, cont’d Extron MLC 104 IP Plus Rotate lo ck ing ar m and insert into w a ll opening. OFF ON OFF ON Extron CONFIG DISPLAY MLC 104 IP Plus VOLUME 1 2 3 4 ON OFF VCR DV D PC Extron MR 200 Modular Mud Ring 4e Secure the MLC 104 IP Plus to the mud ring The co[...]

2-16 PoleV ault Systems Installation • Installation — Stage 2 Stage Thr ee — Install the FF 120 Ceiling Speakers Stage 3 This stage involves installing the devices shown below . Where it goes: Installs in ceiling tiles at predetermined location for best acoustics. Connects to switcher . What it does: Receives and outputs audio signal from PVS[...]

PoleV ault Systems Installation • Installation — Stage 3 2-17 Installation — Stage Thr ee, cont’d N The installation must conform to national and local electrical codes, and UL r equirements. Refer to the device’ s user manual for details. 1. Cut ceiling tile If installing FF 120 speakers, do the following: a. Remove the ceiling tiles whe[...]

2-18 PoleV ault Systems Installation • Installation — Stage 3 4c Wire the captive screw connector . PVS Switcher Rear P anel Speaker 1 Speaker 2 LR 4/8 Ohms AMPLIFIED OUTPUTS 4-pole Captive Screw Connector Audio output to speakers 8 Ohm Load Stereo R– Stereo R+ Stereo L– L R 8 Ohms AMPLIFIED OUTPUTS Stereo L+ Stereo or dual mono output usin[...]

PoleV ault Systems Installation • Installation — Stage 4 2-19 Stage Four — Install the PMK 550 and the PVS 305SA Stage 4 This stage covers installing the devices shown below . L R L R L R AU X AU DI O INPUT 5 LINE OUT VOICELIFT RECEIVER PA GING SENSOR DO NOT GROUND OR SHORT SPEAKER OUTPUTS 1B RGB 1A RGB 2B RGB 2A RGB 3B RGB /VIDEO 4B RGB /VID[...]

2-20 PoleV ault Systems Installation • Installation — Stage 4 PVS 305SA and power supply on the PMK 550 base plate (inverted) 2d Slide the base plate up onto the pole and 2e secure with the set scr ews N The installation must conform to national and local building and electrical codes, and UL r equirements. Refer to the device’ s user manual [...]

PoleV ault Systems Installation • Installation — Stage 4 2-21 Installation — Stage Four , cont’d 2b Gather the cables, pass them down the pipe. P oleV ault Switcher Po wer Supply Projector P ole Cable Access Slot 1 1 1 4 2 3 3 4 5 6 T o P ro jector Ca bles from A/V wall plates, MLC 1 04 IP Plus, and FF 120 speak er s. Optional accessory cab[...]

2-22 PoleV ault Systems Installation • Installation — Stage 4 LR LR LR AU X AUDIO INPUT 5 LINE OUT VO ICELIFT RECEIVER PA GING SENSOR DO NOT GROUND OR SHORT SPEAKER OUTPUTS 1B RGB 1A RGB 2B RGB 2A RGB 3B RGB /VIDEO 4B RGB /VIDEO 3A RGB 4A RGB I N P U T S RS-232 MLC/IR 2/4/8 Ohms CLASS 2 WIRING AMPLIFIED AUDIO OUT VO L/MUTE Tx Rx IR 12V 10V 50mA[...]

PoleV ault Systems Installation • Installation — Stage 4 2-23 Installation — Stage Four , cont’d b. Screw the UPB 25 adjuster plate back onto the base of the pipe and tuck the cables through the back of the adapter plate. c. Replace the projector (with the UPB 25 bracket attached) on the adjuster plate and tighten the adjuster plate locking[...]

2-24 PoleV ault Systems Installation • Installation — Stage 5 Stage Five — Congur e the Switcher and the System 1. Congure the switcher — MLS Switcher Conguration program a. Run the DVD (or download) and install on a PC or laptop the Extron MediaLink Switcher Conguration pr ogram. b. Ensure the PC and the MLC 104 IP Plus are con[...]

PoleV ault Systems Installation • Installation — Stage 5 2-25 Installation — Stage Five, cont’d 2. Congure the system — Global Configurator a. Download and install Extron’s Global Congurator (GC) configuration program (available at www .extron.com ) on the laptop or PC b. Ensure the PC and the MLC 104 IP Plus are connected to th[...]

2-26 PoleV ault Systems Installation • Installation — Stage 5 3. T est the system a. Connect all the input devices (e.g., PC, DVD, document camera, etc.) to the transmitters and power up the input devices. Check that power and signal are pr esent at the transmitters. The LEDs light red when only power is present and light gr een when power and [...]

PoleV ault Systems Installation • Installation — Stage 5 2-27 Installation — Stage Five, cont’d d. T est the contr oller ’s configuration with the following: • Check that the MLC is controlling the PVS 305SA switcher and projector , and output’s the correct image when switching inputs. • Check the projector ’s power control (turn[...]

3-1 PoleV ault Systems Installation • Optional Accessory Installation Optional Accessory Installation — V oiceLift System The Extron V oiceLift system is an easy-to-use, low-power , voice amplication system that ensur es the speaker ’s voice can be clearly heard at a comfortable level thr oughout the classroom. Speech is picked up by the p[...]

PoleV ault Systems Installation • Optional Accessory Installation 3-2 Optional Accessory Installation — Priority Page Sensor Kit The Priority Page Sensor Kit momentarily silences classroom audio whenever a page is made fr om a public address (P A) system. For detailed information, refer to the Priority Page Sensor Kit Installation Instructions [...]

3-3 PoleV ault Systems Installation • Optional Accessory Installation LR LR LR AU X A UDIO INPUT 5 LINE OUT PA GING SENSOR DO NOT GROUND OR SHO RT SPEAKER OUTPUTS RS-232 MLC/IR 2/4/8 Ohms CLASS 2 WIRING AMPLIFIED A UDIO OUT V OL/MUTE Tx Rx IR 12V 10V 50mA CONT RO L L R A UX A UDI O INPUT 5 C L R LINE O UT C L R 2/4/8 O hm s C LA SS 2 WIRIN G A MP[...]

4-1 Specications For detailed specications and warranty information of the PoleV ault System components, refer to the device manuals, or the product pages at www .extron.com . Mounting hardwar e PCM 340 Mounting ........................................ Dr op ceiling mountable Maximum load .............................. 50 lbs (22.7 kg) Materi[...]

4-2 PoleV ault Systems Installation • Reference Information Regulatory compliance Safety ................................... CE, c-UL, UL UL rated for use in plenum airspaces: meets UL 2043 for heat and smoke release, excluding the power supply; meets UL 60065 for safety . EMI/EMC .......................... CE, C-tick, FCC Class B, ICES, VCCI Env[...]

PoleV ault Systems Installation • Reference Information 4-3 Refer ence Information, cont’d Powe r Supply (include d with PV S sw itcher ) w eight 0. 9 lbs (0 .4 kg ) Ext ron UP B 25 Univ ersa l Pr oj ec to r M ounting Brack et w eight 3. 7 lbs (1 .7 kg ) T o ta l we ight (wit hout pr ojec to r or elec tri cal bo xe s) * 14 -1 6 lb s (6 .4 -7 .3[...]

SIS Command/Response T able Command ASCII (T elnet) (host - switcher) Response (switcher to host) Video Configuration Set the video signal type X! * X2# T yp X! = X2# ] V iew the video signal type X! T yp X! = X2# ] Status Commands V iew all input status LS Frq= X2$ * X2$ * X2$ * X2$ ] V iew paging sensor status 42S Sts42* X#] Mic T alk-over T[...]

Ex tron US A - We st Headquar te rs +8 00 .6 33 .9 87 6 Insid e U S A / C anad a O nl y +1 .7 14 .4 91 .1 50 0 +1 .7 14 .4 91 .1 51 7 FA X Ex tron US A - East +8 00 .6 33 .9 87 6 Insid e U S A / C anad a O nl y +1 .9 19 .8 63 .1 79 4 +1 .9 19 .8 63 .1 79 7 FA X Ex tron Europe +8 00 .3 98 7. 66 73 Insid e E urop e O nl y +3 1. 33 .4 53 .4 04 0 +3 1.[...]