Fortec FS-4000v2 manuale d’uso

OK LIS T PR + PR[...]

GENERAL INFORMA TION INSTALLATION MENU INFORMA TION 1 6 7 Main Features For your Safety Unpacking General Operation RCU Front Panel Rear Panel 1 2 3 3 4 5 5 Main Menu 1. Channel List 1.1 TV Channel List 1.2 Radio Channel List 1.3 Delete All 2. Installation 2.1 Antenna Connection 2.2 Satellite List 2.3 Antenna Setup 2.4 Single Satellite Search 2.5 M[...]

4. T ools 4.1 Information 4.2 Factory Setting 4.3 SatcoDx Auto Programing 5. Game 6. Hot key 6.1 Info 6.2 EPG 6.3 Find 6.4 Numer 6.5 TV/Radio 6.6 Up/Down 6.7 Left/Right 6.8 Mute 6.9 Pause 6.10 OK 6.11 Audio 6.12 Recall 6.13 Fav 6.14 T eletext 6.15 Zoom 24 24 24 25 25 26 26 26 27 27 27 27 27 27 27 27 28 28 28 28 28 TROUBLE SHOOTING 29[...]

A Digital Satellite Receiver is a convenient product that allows you to view a variety of programs provided through satellite. This user's guide covers the installation of the DSR and the necessary steps to implement various features. This also explains special features available only in this DSR in detail, which will allow you to make full us[...]

For Y our Safety Be sure to turn the Receiver off and disconnect the AC power cord before cleaning the Receiver surface. If the surface is dirty, wipe clean with a cloth which has been dipped in a weak soap-and- water solution and wrung out thoroughly, and then wipe again with a dry cloth. Switch the receiver off whenever it remains out of service [...]

General Operation Throughout this manual you will notice that the everyday operation of the receiver is based on a series of user friendly on screen display and menus. These menus will help you get the most from your receiver, guiding you through installation, channel organizing, viewing and many other functions. All function can be carried out usi[...]

RCU Key Function Turns power ON/OFF of the DSR When watching a channel, mute the sound Switches between TV and Radio mode 0~9 MENU EXIT OK, LIST PR+, PR- Enter number of the required menu item or select a channel number to watch Press this key one time to run menu onscreen Return to the previous menu on the menu screen or escape from the menu Press[...]

Front Panel Front Panel Rear Panel Rear Panel The picture is only for reference,please make the object as the standard. CONNECT VIDEO TO TV USING RCA JACK CONNECT TO A DIGITAL AMPLIFIER CONNECT TO A PC FOR S/W UPGRADE CONNECT TO AUDIO R/L TO TV OR AUDIO TUNER LNB IN: CONNECT TO SATELLITE ANTENNA Connecting to TV using SCART support DSR Satellite Di[...]

The picture is only for reference,please make the object as the standard. Connecting to TV using RCA support L R IN VIDEO TV AUDIO DSR Satellite Dish Connecting to Digital Amplifier Satellite Dish DIGITAL AUDIO CONVERTOR OR AMPLIFIER SPEAKER DIGITAL AUDIO L R IN TV[...]

Main Menu This menu consists of 5 major main menus as follow. - Edit Channel - Installation - System Setup - T ools - Game During the installation the OK key confirms a selection and LIST key shows Down List Box if the column has mark. Y ou can also use the numeric keys on the RCU to enter numeric value. Use the PR+ , PR- key to move upwards and do[...]

If there is no program, you can not exit from the Main Menu window by pressing MENU or EXIT key. System will inform "No channel" and the following items turn grey . 1. Press OK key or key to pop up the "Input Password" dialogue, you can not enter into the menu unless the correct password is inputted. The default password is &quo[...]

3. Press FAV key to move the FA V button upward. Select the program and press OK key to pop up the favourite group list. In the list, select the group that you want to add into and press OK key, and then you will find the favourite mark is displayed at the right side of the selected program. Press FAV key again to exit from the fav mode, and you wi[...]

6. Press yellow colour key to move the Move button upward. Select the program and press OK key to mark this program with the move mark. Press PR+, PR- keys to move the cursor to the position where you want to locate and press OK key to confirm. Press yellow colour key again to exit from the yellow mode, and you will find the yellow button return to[...]

Press green colour key to move the Edit button upward. Select the program and press OK key to pop up the Rename window. In Rename window, press red colour key to switch between capital letter and lower letter; press green colour key to delete the character on the cursor; press keys to move the cursor left or right; press numeric keys (0-9 ) to inpu[...]

In Delete window, press blue colour key to move the Delete button upward. Select the program and press OK key to mark this program with the deletion mark. You can cancel this mark by pressing OK key again. Press EXIT key to pop up the dialogue "Are you sure to save?". Select Yes button and press OK key to save, or select NO button and pre[...]

2. Installation 1. Press OK key or key to pop up the "Input Password" dialogue, you can not enter into the menu unless the correct password is inputted. The default password is "0000". 2. Press PR+, PR- keys to move the cursor up or down. 3. Press EXIT key or key to move the focus to the left menu. 2.1 Antenna Connection Press k[...]

3. Press red colour key to pop up the Edit Satellite window. Press PR+, PR- keys to move cursor up or down. Name: User numeric keys to change the name of the satellite, please refer to the Edit Channel Name. Longitude: Y ou can press keys to switch between east longitude and west longitude. After pressing OK key, you can use numeric keys to edit th[...]

Suppose that you have selected Fixed Antenna in the Antenna Connection window. 1. Satellite: All selected satellites in the satellite list are displayed in this item. Press keys to select the satellite in circle. Or press OK key to pop up the drop- down list, then select the desired satellite in the list and press OK key to confirm. 2. LNB Freq, Tr[...]

4. Motor Setting: Press OK key to the Motor Setting window. Satellite: Press keys to select the satellite in circle. Or press OK key to pop up the drop-down list, then select the desired satellite in the list and press OK key to confirm. Transponder: The same operation as the above. Position No., & Save: The range is from 0 to 63. "0"[...]

6. If select USALS, Delete All item will turn grey. Local Longitude, Local Latitude: Press keys to switch between West and East, or press keys to switch between North and South. Press OK key to enter into the editing mode. Use numeric keys (0-9) to input the longitude or latitude, press MENU key or EXIT key to exit. The range of the longitude is fr[...]

2.5 Multi Satellite Search 4. Network Search: Select between No and Yes. This item turns grey when Auto Scan is selected in the following Scan mode item. 5. Scan Mode: Press keys to select between Auto Scan and Preset Scan. Auto Scan is Blind scan, while Preset Scan is to search the preset frequencies. 6. Search: Press OK key to start searching. Fr[...]

2. Press red colour key to pop up the Edit TP window. Frequency, Symbol rate: Press keys to add or reduce by step one. Or press numeric keys (0-9) to input the desired value. The range of the frequency is 3000- 13450, while the range of the symbol rate is 1000~45000. The inputted value is beyond this range, the value will return to the origin value[...]

1. Press OK key to enter into the Language window. Press keys to select the language in circle, while press PR+, PR- keys to move the cursor up or down in circle. 2. Press MENU key or EXIT key to save and exit. 3. The types of the language, pleaser refer to the configuration of the customer. Press PR+, PR- key to move the cursor up or down, while p[...]

1. Summer T ime: Select between ON and OFF. "OFF" delegates the normal time. If select ON, time will add one hour. 2. GMT Offset: When select "ON" in GMT Usage item, system will get the date and time information from the screen automatically . Date and Time two items will turn grey. Select the proper option in the GMT Offset ite[...]

Before entering into the Parental Lock window, you need input the correct password. The default password is 0000. 1. Menu Lock: Press keys to select between Off and On. If select "On" , you can not enter into the most window before entering the password. 2. Channel Lock: Press keys to select between Off and On. The default value is Off. 3[...]

There are 32 favorites group listed in this window. Press PR+, PR- keys to select one and press OK key to the Rename window. Since the same operation as the above the Add Satellite window, here we don't explain any more. 3.7 Favorite 3.8 Other 1. LNB Power: Select between Of f and On. 2. Channel Play Type: Select among All, Free, Scramble. 3. [...]

4. T ools 4.2 Factory Setting Press OK key to enter into the Factory Setting window. Select Y es button and press OK key to return to the factory setting. All searched channels and set information will be erased. Select No button and press OK key to cancel this operation, or press MENU or EXIT key to cancel and exit. 1. Press OK key or key to pop u[...]

Press OK key at the Start button to start receiving date from RS232 for 10 seconds. 4.3 SatcoDX Auto Programing 5. Game 1. Press OK key or key to enter into the game. 2. Press PR+, PR- keys to move the cursor up or down. 3. Press EXIT key or key to move the focus to the left menu. 4. Select the game that you want to play and press OK key to enter i[...]

Press INFO key to pop up the Info bar. Press INFO key again to pop up the program guide of the current program. You can press keys to know the program guide of the future 16 days. 6. Hot Key Press EPG key to enter into the EPG window. 1. Press PR+, PR-, keys to select up or down, left or right. 2. Press red colour key to pop up the Time Bar window.[...]

Press FIND key on to pop up the Find window. Use numeric keys to enter into the character and use the colour keys to realized the corresponding operation. 6.3 Find Use the numeric keys (0-9) to input the number of the desired channel. If the inputted number is beyond the valid channel number, system will "No such a channel" and press OK k[...]

1. Press keys to enter into the Audio window. 2. Press keys to select among Left, Right, Stereo, and Mono. 3. Changing the audio mode is only connected with the current channel, not all the channels. 4. Press MENU or EXIT key to close this window. 6.11 Audio Press key to switch the current channel to the previous channel. 6.12 Recall 1. Press FAV k[...]

Problem Possible causes What to do The display on the front panel does not light up. No sound or picture, but the front panel shows red light. Main cable is not connected. The is in standby mode. receiver Check that the main cable is plugged into the power socket. Press the standby button. No sound or picture. The satellite dish is not pointing at [...]