Frigidaire 220201d052 manuale d’uso

USE & CARE MANU AL ELECTRONIC CONTROL AIR CONDITIONER READ AND SA VE THESE INSTRUCTIONS P/N 220201d0 52 SZ000705(En)-YaoKong 09/2/2005, 2:20 PM 1[...]

2 ROOM AIR CONDITIONER W ARRANTY Y our product is protected by this warranty Y our appliance is warranted by Electrolux. Electrolux has authorized Frigidaire Consumer Services and their authorized servicers to perform service under this warranty . Electrolux authorizes no one else to change or add to any of these obligations under this warranty . Any obligations for service and parts under this warranty must be performed by Frigidaire Consumer Services or an authorized Frigidaire servicer . FULL ONE-YEAR W ARRANTY LIMITED 2-5 YEAR W ARRANTY (Sealed System) LIMITED W ARRANTY (Applicable to the State of Alaska) THE CONSUMER WILL BE RESPONSIBLE FOR: Costs of service calls that are listed under [...]

3 Record Y our Model and Serial Numbers Record in the space provided below the model and serial numbers. On all models, the serial plate is located on the outside of the cabinet. Model No. Serial No. Register Y our Product The self-addressed PRODUCT REGISTRA TION CARD should be filled in completely , signed and returned to the Frigidaire Company . 2 W arranty 3 Product Registration 3 Normal Sounds 4 Important Safety Instructions 5-10 Using Air Conditioner 5-10 Air Conditioner Features 1 1 Care and Cleaning 1 1 Energy Saving Ideas 12 Avoid Service Checklist Vibration Unit may vibrate and make noise because of poor wall or window construction or incorrect installation. High Pitched Chatter T o[...]

4 Avoid fire hazard or electric shock. Do not use an extension cord or an adaptor plug. Do not remove any prong from the power cord. Grounding type wall receptacle Do not, under any circumstances, cut, remove, or bypass the grounding prong. Power supply cord with 3-prong grounding plug and current detection device Read all instructions before using this air conditioner . For Y our Safety Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Read product labels for flammability and other warnings. Prevent Accidents T o reduce the risk of fire, electrical shock, or injury to persons when using your air conditioner , follow basic prec[...]

5 Air Conditioner Features Fig. “A” T OUCH P AD Fig. “B” ELECTRONIC CONTROL OPERA TING INSTRUCTIONS Before you begin, thoroughly familiarize yourself with the control panel and remote as shown below and all its functions, then follow the symbol for the functions you desire. The unit can be controlled by the touch pad alone or with the remote.[...]

6 Auto Temp Auto Temp Auto Temp Auto Temp Auto Temp Auto Temp Air Conditioner Features (continued) TO CHANGE TEMPERA TURE SETTING: YOU WILL SEE: TO ADJUST F AN SPEEDS: YOU WILL SEE: DO THIS: PRESS TO RAISE PRESS TO LOWER DO THIS: PRESS TO SELECT : F ASTER SLOWER A 2 Digit Display is used to indicate the Fan Speed setting, from 10 through 99. When the “SLOWER” button is pressed the motor speed will slow down at multiple intervals (90 distinct settings), to a minimum setting of 10. T o speed the motor up, press the “F ASTER” button. The speed will increase at multiple intervals to a maximum setting of 99. After 5 seconds the control will automatically change back to displaying the set [...]

7 Auto Temp Auto Temp[...]

8[...]

9 Auto Temp Auto Temp Auto Temp Note: This feature can be activated from the remote control ONL Y , the unit must be in a cooling mode. T o activate the remote sensing feature, point the remote control towards the unit and press the remote sensing button. Next, use the buttons to set the desired temperature at the remote. (Note that the set temperature will only be displayed on the unit itself). The LIGHT on the unit control will pulse to indicate it received the signal. The LIGHT on the remote control will pulse each time it sends a signal. It will continue to send this signal until the feature is deactivated by pressing the remote sensing button. If the unit does not receive the remote sen[...]

10 Fresh Air V ent Control (On some models) The Fresh Air V ent allows the air conditioner to: 1. Recirculate inside air - V ent Closed (see Fig. 1) 2. Draw fresh air into the room - V ent Open (see Fig. 2) 3. Exchange air from the room and draws fresh air into the room - V ent and Exhaust Open (see Fig. 3) Figure 1 (VENT CLOSED) Figure 2 (VENT OPEN) Figure 3 (VENT & EXHAUST OPEN) ADDITIONAL THINGS YOU SHOULD KNOW Now that you have mastered the operating procedure, here are more features in your control that you should become familiar with. Air Conditioner Features (continued) • The control will maintain the set temperature within 2 degrees Fahrenheit, between 60F and 90F degrees. • [...]

11 Clean your air conditioner occasionally to keep it looking new . Be sure to unplug the unit before cleaning to prevent shock or fire hazards. Air Filter Cleaning The air filter should be checked at least once a month to see if cleaning is necessary . T rapped particles in the filter can build up and cause an accumulation of frost on the cooling coils. • Push the vent handle to the V ent Closed position (where applicable). • Open the front panel. • Grasp the filter by the center and pull up and out. • W ash the filter using liquid dishwashing detergent and warm water . Rinse filter thoroughly . Gently shake excess water from the filter . Be sure filter is thoroughly dry before repl[...]

12 Air conditioner will not operate. Air from unit does not feel cold enough. Air conditioner cooling, but room is too warm - ice forming on cooling coil behind decorative front. Air conditioner cooling, but room is too warm - NO ice forming on cooling coil behind decorative front. Air conditioner turns on and off rapidly . Noise when unit is cooling. W ater dripping INSIDE when unit is cooling. W ater dripping OUTSIDE when unit is cooling. Remote Sensing Deactivating Prematurely (Some Models). Room T oo Cold. A void Service Checklist Before calling for service, review this list. It may save you time and expense. This list includes common occurrences that are not the result of defective work[...]