FujiFilm S20 Pro manuale d’uso

This manual will show you how to use your FUJIFILM DIGITAL CAMERA FinePix S20 Pro correctly. Please follow the instructions carefully. BL00291-200 ( 1 ) Getting Ready Using the Camera Advanced Features Software Installation Settings Viewing Images[...]

2 W arning IMPOR T ANT Be sure to read this page before using the Software. For customers in the U.S.A. Tested To Comply With FCC Standards FOR HOME OR OFFICE USE FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this de[...]

3 EC Declaration of Conformity We Name : Fuji Photo Film ( Europe ) G.m.b.H. Address : Heesenstrasse 31 40549 Dusseldorf, Germany declare that the product Product Name: FUJIFILM DIGITAL CAMERA FinePix S20 Pro Manufacture’s Name: Fuji Photo Film Co., Ltd. Manufacture’s Address: 26 - 30, Nishiazabu 2 - chome, Minato - ku, Tokyo 106 - 8620, Japan [...]

4 Contents ATTACHING THE LENS CAP AND STRAP ................................................................................................................... 10 LOADING THE BATTERIES ........................................................................................................................................... 12 INSERTING THE MEDIA ..[...]

5 Getting Ready Using the Camera Advanced Features Settings Software Installation Viewing Images System Expansion Options ....................................... 105 Accessories Guide .................................................... 106 Using Your Camera Correctly ................................... 107 Power Supply and Batteries ..............[...]

6 Preface ■ Test Shots Prior to Photography For particularly important photographs (such as weddings and overseas trips), always take a test photograph and view the image to make sure that the camera is functioning normally. h Fuji Photo Film Co., Ltd. cannot accept liability for any incidental losses (such as the costs of photography or the loss[...]

7 h 16 MB, xD-Picture Card™ (1) Included with: Anti-static case (1) h AA-size alkaline batteries (4) h Shoulder Strap (1) h Protective cover (2) h Metal strap clip (2) h Clip attaching tool (1) h Lens cap (1) h Lens cap holder (1) h A/V (audio-visual) cable (1) (plug (2.5 mm dia.) to pin-plug cable × × 2) h USB cable (mini-B) (1) h IEEE1394 4-p[...]

8 Camera parts and features ✽ Refer to the pages in parentheses for information on using the camera parts or feature. Command dial (P .20) Continuous shooting button (P .50) Exposure compensation button (P .53) Flash button (P .45) Release socket (P .25) Shutter button Power switch Playback mode (P .29) Photography mode (P .23) Power-OFF Mode dia[...]

9 Flash pop-up button (P .19, 45) (One-touch AF) button (P .21, 48) SHIFT button (P .22) Speaker Microphone A/V OUT (Audio/V isual output) socket (P .98) IEEE1394 socket (P .100) DC IN 5V (power input) socket (P .98) T erminal cover Focus mode selector switch (P .21, 48) T erminal cover INFO (information check) button (P .21, 56, 70) Strap mount (P[...]

10 When attaching the strap to the camera, attach the metal strap clip to the camera before threading the strap through the clip. This description explains how to attach the strap using the clip attaching tool provided to make attaching the metal strap clip easier. (Numbers 1 to 8 refer to the illustrations.) Checking that the metal strap clip is f[...]

11 Getting Ready 6 5 lens cap holder Fastener Fastener Remove fasteners A and B from only one side of the shoulder strap. Then pass the shoulder strap through the lens cap holder and then back through fasteners A and B . 7 Thread the strap through the protective cover and metal strap clip. 8 Thread the strap through the buckle and retainer. Repeat [...]

12 1 Check that the camera is turned off (indicator lamp is off) before opening the battery cover. ● ! Opening the battery cover while the camera is on, the camera is turned off. ● ! Do not apply force to the battery cover. 2 Load the batteries correctly as indicated by the polarity icons. LOADING THE BA TTERIES ◆ How to use the batteries ◆[...]

13 Getting Ready Pull on the battery cover to close it. 1 While pressing on the battery cover to push the batteries down, 2 slide the cover closed. 3 4 0 1 0 2[...]

14 2 ● ! Insert only the appropriate media types into the xD-Picture Card and Microdrive slots. Inserting the incorrect media will damage the camera or media. ● ! If the media is oriented incorrectly, it will not go all the way into the slot. Do not apply excessive force when inserting an xD-Picture Card or Microdrive. ● ! If the media is not[...]

15 Getting Ready ◆ How to replace the xD-Picture Card ◆ Push the xD-Picture Card into the slot and then slowly remove your finger. The lock is released and the xD-Picture Card is pushed out. ◆ How to replace the Microdrive ◆ Open the slot cover, press the Microdrive eject button and remove the Microdrive. ● ! When storing Microdrives, alw[...]

  １     ／       １     ／     ２ ０ ０   １     ／       １     ／     ２ ０ ０ ４ １ ２     ：     ０ ０         Ａ Ｍ １ ２     ：     ０ ０         Ａ Ｍ Ｓ Ｅ Ｔ Ｓ Ｅ Ｔ Ｃ Ａ Ｎ Ｃ Ｅ Ｌ Ｃ Ａ Ｎ Ｃ Ｅ Ｌ ＯＫ ＯＫ BACK[...]

１ ２     ：     ０ ０         Ａ Ｍ １ ２     ：     ０ ０         Ａ Ｍ Ｄ Ａ Ｔ Ｅ   Ｔ Ｉ Ｍ Ｅ Ｄ Ａ Ｔ Ｅ   Ｔ Ｉ Ｍ Ｅ Ｓ Ｅ Ｔ Ｓ Ｅ Ｔ Ｃ Ａ Ｎ Ｃ Ｅ Ｌ Ｃ Ａ Ｎ Ｃ Ｅ Ｌ ＯＫ ＯＫ BACK BACK １ ０ １ ０     ．           ．     ?[...]

Ｆ Ｒ Ｆ Ｒ ＡＭ Ａ Ｍ Ｅ   Ｎ Ｅ   Ｎ Ｏ． Ｏ． Ｃ Ｃ Ｄ − Ｒ Ｃ Ｃ Ｄ − Ｒ Ａ Ｗ Ｃ Ｏ Ｎ Ｃ Ｏ Ｎ Ｔ． Ｔ． Ａ Ｄ Ａ Ｐ Ｔ Ｅ Ｒ Ａ Ｄ Ａ Ｐ Ｔ Ｅ Ｒ Ｄ Ａ Ｔ Ｅ Ｄ Ａ Ｔ Ｅ ／ Ｔ Ｉ Ｍ Ｅ Ｔ Ｉ Ｍ Ｅ Ｓ Ｅ Ｔ Ｓ Ｅ Ｔ Ｎ Ｏ Ｎ Ｏ Ｏ Ｆ Ｆ Ｏ Ｆ Ｆ ENGLISH[...]

19 Using the Camera ● Flash release T o use the flash, press the Flash pop-up button to release the flash. ● Photography mode selector T urn the Mode dial to change Photography mode. Still image shooting Auto Scene Position Manual Shutter-priority Auto Program Auto Aperture-priority Auto Movie recording Set-up Movie Set-up ● ON/OFF and Photog[...]

20 BASIC OPERA TION GUIDE Up, down, left and right are indicated by black triangles in the Owner ’ s Manual. Up or down is shown as “ a ” or “ b ” , and left or right is shown as “ d ” or “ c ” . : Exposure compensation Hold down the “ ” button and turn the Command dial to select the setting. : Flash Release the pop-up flash, [...]

0 FinePix Photo mode ( ) button Photography: Allows you to select the quality (Number of recorded pixels), sensitivity and FinePix COLOR settings. Playback: Allows you to specify the print order (DPOF) settings. 0 Diopter adjustment dial Makes the image in the viewfinder easier to see. Set the dial to the position where the AF frame appears sharpes[...]

22 BASIC OPERA TION GUIDE LCD monitor brightness / V olume adjustment Holding down the “ SHIFT ” button and pressing the “ DISP ” button displays the menu.Press “ a ” or “ b ” to select an option and press “ d ” or “ c ” to change the setting. Then press the “ MENU/OK ” button to confirm the setting. Note that the volume[...]

23 Using the Camera 1 2 1 Set the Power switch to “ q ”. 2 Set the Mode dial to “ B ”. 3 Set the Focus mode selector switch to “S-AF”. h Focal range Wide-angle: Approx. 50 cm (1.6 ft.) to infinity Telephoto: Approx. 90 cm (3.0 ft.) to infinity Press the Flash pop-up button to pop up the flash. ● ! When the flash is popped up, the imag[...]

24 T AKING PICTURES ( AUTO MODE ) STILL PHOTOGRAPHY MODE 4 Brace your elbows against your sides and hold the camera with both hands. Position the thumb of your right hand so that it is handy for using the zoom. ● ! The image will be blurred if the camera moves when taking the picture (camera shake). Use a tripod to avoid camera shake, particularl[...]

25 Using the Camera Press the Shutter button down halfway. When a short double-beep is heard, the camera focuses on your subject. At that point, the AF frame on the screen becomes smaller and the camera sets the shutter speed and aperture (the indicator lamp (green) stops blinking and remains lit). ● ! The image shown on the screen before taking [...]

26 INDICATOR LAMP DISPLAY T AKING PICTURES ( AUTO MODE ) STILL PHOTOGRAPHY MODE NUMBER OF AVAILABLE FRAMES Ａ Ｕ Ｔ Ｏ Ａ Ｕ Ｔ Ｏ ２ ５ ０ ２ ５ ０ Ｆ ５ ． ６ ３ ３ ３ ３ The number of available frames appears on the screen. ● ! See P.32 for information on changing the quality setting. ● ! The default quality “ y ” s[...]

27 Using the Camera Click In a shot like the image on the left, the subjects are not in the AF frame. If the picture is taken at this point, the subjects will not be in focus. USING AF/AE LOCK 1 ３ ３ ３ ３ Ａ Ｕ Ｔ Ｏ Ａ Ｕ Ｔ Ｏ Move the camera slightly so that one of the subjects is in the AF frame. 2 Press the Shutter button down ha[...]

28 T AKING PICTURES ( AUTO MODE ) STILL PHOTOGRAPHY MODE USING THE ZOOM ( OPTICAL ZOOM / DIGITAL ZOOM ) Press the Zoom buttons to zoom in and out. The FZ ring can also be used to control the zoom ( ➡ P.24). The digital zoom can be used with the “ 3 ”, “ 2 ” and “ 1 ” quality settings. When zooming changes between optical and digital, [...]

１ ０ ０ − ０ ０ ０ １ １ ０ ０ − ０ ０ ０ １   ２ ／ １ ０ １ ０ ／ ２ ０ ０ ／ ２ ０ ０ ４     １ ２ ： ５ ６ Ｐ Ｍ     １ ２ ： ５ ６ Ｐ Ｍ 29 Using the Camera VIEWING THE IMAGES ( PLA YBACK ) PLAYBACK MODE Single-frame playback 1 Set the Power switch to “ w ”. 2 Press “ c ” to sca[...]

30 VIEWING THE IMAGES ( PLA YBACK ) PLAYBACK MODE Playback zoom Pressing the Zoom button during single-frame playback zooms (enlarges) the still image. At that point, a zoom bar appears. h Zoom scales 5 F, N 2832 × 2128 pixel images: Max. 18 × 3 2048 × 1536 pixel images: Max. 13 × 2 1600 × 1200 pixel images: Max. 10 × 1 1280 × 960 pixel imag[...]

ＥＲＡＳＥ ＯＫ？ ＥＲＡＳＥ ＯＫ？ Ｙ Ｅ Ｓ Ｙ Ｅ Ｓ Ｃ Ａ Ｎ Ｃ Ｅ Ｌ Ｃ Ａ Ｎ Ｃ Ｅ Ｌ ＯＫ ＯＫ BACK BACK Ｆ Ｒ Ｆ Ｒ ＡＭ Ａ Ｍ Ｅ １ ０ ０ − ０ ０ ０ ９ １ ０ ０ − ０ ０ ０ ９ Ｂ Ａ Ｃ Ｋ Ｂ Ａ Ｃ Ｋ Ｅ Ｒ Ａ Ｓ Ｅ Ｅ Ｒ Ａ Ｓ Ｅ Ｆ Ｒ Ｆ Ｒ Ａ Ｍ Ｅ[...]

32 1 1 Set the Power switch to “ q ”. 2 Set the Mode dial to Still photography mode or Movie mode. 3 Press the Photo mode ( p ) button. 2 1 Press “ d ” or “ c ” to select the “ y ” quality setting and then press “ a ” or “ b ” to change the setting. 2 Press the “MENU/OK” button to confirm the setting. Choose from 5 setti[...]

33 Advanced Features 1 1 Set the Power switch to “ q ”. 2 Set the Mode dial to Still photography mode. 3 Press the Photo mode ( p ) button. ● ! In “ r ” Movie mode, do not set the “ S ” (sensitivity) setting. 0 1 0 3 0 2 Sensitivity is retained even when the camera is turned off or the Mode dial is changed. S SENSITIVITY p PHOTO MODE [...]

34 S SENSITIVITY p PHOTO MODE STILL PHOTOGRAPHY ◆ Quality setting in High-sensitivity mode ◆ If you try to select a quality setting ( ➡ P.32) other than “ 1 ” when the camera is set to High-sensitivity mode, “ & ” appears blinking and the quality cannot be changed. High-sensitivity photography ( 1600 ) When a high-sensitivity (160[...]

35 Advanced Features J FinePix COLOR p PHOTO MODE STILL PHOTOGRAPHY Ｓ Ｔ Ｄ Ｓ Ｔ Ｄ Ａ Ｕ Ｔ Ｏ Ａ Ｕ Ｔ Ｏ Ｓ Ｔ Ａ Ｎ Ｄ Ａ Ｒ Ｄ Ｓ Ｔ Ａ Ｎ Ｄ Ａ Ｒ Ｄ Ｃ Ｈ Ｒ Ｃ Ｈ Ｒ ＯＭ Ｏ Ｍ Ｅ Ｂ＆ Ｂ ＆ Ｗ Ｃ Ｏ Ｌ Ｏ Ｒ Ｃ Ｏ Ｌ Ｏ Ｒ ● ! In “ r ” Movie mode, do not set the “ J ” Fine[...]

36 FOCUSING ( DIST ANCE ) STILL PHOTOGRAPHY FUNCTIONS The distance from the subject to the camera is referred to as the shooting distance. When the shooting distance is set correctly and the image appears sharp, the image is focused. ■ Three focusing methods There are mechanisms for focusing: (1) Single AF (S-AF); (2) Continuous AF (C-AF); and (3[...]

37 Advanced Features EXPOSURE ( SHUTTER SPEED AND APER TURE ) STILL PHOTOGRAPHY FUNCTIONS Closed Open When shooting a moving subject, you can either “freeze the motion” or “capture the sense of movement” by adjusting the shutter speed. Freezes the motion of the subject. Photographs the traces left by the subject's movement. By adjustin[...]

38 T AKING PICTURES — SELECTING THE CAMERA SETTINGS STILL PHOTOGRAPHY FUNCTIONS Consider the scene you are photographing and the sort of image you want to achieve when you specify the camera settings. A general guide is given below. 1 Select the Photography mode ( ➡ P .40-44, 67-68). B Specifies all settings other than Quality, Sensitivity and [...]

39 Advanced Features When shutter speed and aperture adjustments alone do not give the correct exposure. When the image is too bright Lower the S sensitivity setting. Use an ND filter (Sold separately). When the image is too dark Raise the S sensitivity setting. Use flash or the brightness adjustment function. d Flash e Macro/ Super macro E AE lock[...]

40 B AUTO Set the Mode dial to “ B ”. This is the easiest mode to use and can be used for most types of shot. ? SCENE POSITION Set the Mode dial to “ ? ”. This mode provides options tailored to different types of scene. Choose from 4 types of scene ( m , , , . or / ). 1 Turn the Command dial to select the setting. 2 ３ ３ ３ ３ ２ ５ [...]

41 Advanced Features N PROGRAMMED AUTO STILL PHOTOGRAPHY FUNCTIONS Set the Mode dial to “ N ”. This is an automatic mode that allows you to specify any of the settings other than the shutter speed and aperture. This allows you to take shots relatively simply in the same way as the Shutter- priority Auto and Aperture-priority Auto modes (program[...]

42 M SHUTTER-PRIORITY AUTO STILL PHOTOGRAPHY FUNCTIONS Set the Mode dial to “ M ”. This is an automatic mode that allows you to set the shutter speed. Use this mode for shots where you want to freeze a moving subject (fast shutter speed) or convey the impression of movement (slow shutter speed). Setting the shutter speed Turn the Command dial t[...]

43 Advanced Features < APER TURE-PRIORITY AUTO STILL PHOTOGRAPHY FUNCTIONS Set the Mode dial to “ < ”. This is an automatic mode that allows you to set the aperture. You can use this mode for shots where you want to have the background out of focus (wide aperture) or have both near and far objects in focus at the same time (narrow apertur[...]

44 > MANUAL STILL PHOTOGRAPHY FUNCTIONS Ｍ １ ０ ０ ０ １ ０ ０ ０ Ｆ ８ ． ０ ３ ３ ３ ３ Ｉ Ｓ Ｏ Ｉ Ｓ Ｏ   ２ ０ ０   ２ ０ ０ Set the Mode dial to “ > ”. Manual mode allows you to set any shutter speed and aperture setting. Ｍ   ５ ０ ０   ５ ０ ０ Ｆ ５ . ６ ３ ３ ３ ３ Ｉ Ｓ Ｏ [...]

45 Advanced Features d FLASH PHOTOGRAPHY STILL PHOTOGRAPHY FUNCTIONS Choose from 6 flash modes according to the type of shot. 1 Set the Power switch to “ q ”. 2 Set the Mode dial to Still photography mode. 3 Press the Flash pop-up button to pop-up the flash. h Effective flash range ( B ) Wide-angle: Approx. 0.3 m to 8.5 m (1.0 ft. to 27.9 ft.) [...]

46 d FLASH PHOTOGRAPHY STILL PHOTOGRAPHY FUNCTIONS 1 Hold down the “ d ” button. 2 Turn the Command dial to select the flash mode setting. ● ! See P.64 for information on using an external flash. 4 The “ x ”, “ b ”, “ d ”, “ c ” or “ n ” appears on the screen when the flash is used. ● ! When using the flash in dusty cond[...]

47 Advanced Features d Forced flash Use this mode in backlit scenes, such as a subject against a window or in the shade of a tree, or to get the correct colors when taking a picture under bright lighting. In this mode, the flash fires in bright as well as dark conditions. c Slow synchro This is a Flash mode that uses a slow shutter speed. This allo[...]

48 MANUAL FOCUS STILL PHOTOGRAPHY FUNCTIONS Ｐ Ｐ ２ ５ ０ ２ ５ ０ Ｆ ５ ． ６ ３ ３ ３ ３ Ｉ Ｓ Ｏ Ｉ Ｓ Ｏ   ２ ０ ０   ２ ０ ０ 0 1 0 2 1 Close range Long range Ｐ Ｐ ２ ５ ０ ２ ５ ０ Ｆ ５ ． ６ ３ ３ ３ ３ Ｉ Ｓ Ｏ Ｉ Ｓ Ｏ   ２ ０ ０   ２ ０ ０ 0 1 0 2 2 Ｆ ５ ． ６ ３ ３[...]

49 Advanced Features Use this button to take pictures of a moving subject. Using Continuous AF mode reduces the time required for focusing. Set the Focus mode selector switch to “C-AF”. 1 2 Frame the shot so that the subject fills the center of the image or the entire AF frame. ２ ５ ０ ２ ５ ０ Ｆ ５ ． ６ ３ ３ ３ ３ Ｐ Ｉ Ｓ[...]

50 1 Set the Power switch to “ q ”. 2 1 Hold down the “ f ” button. 2 Turn the Command dial to select the Continuous shooting mode. 3 Release the “ f ” button to confirm your selection. 3 Setting the Continuous shooting mode (except for “OFF”), the selected mode appears on the screen. f : Top 10-frame continuous shooting j : Auto br[...]

51 Advanced Features f Top 10-frame continuous shooting Ｓ Ｔ Ｏ Ｒ Ｉ Ｎ Ｇ Ｓ Ｔ Ｏ Ｒ Ｉ Ｎ Ｇ This mode shoots up to 10 frames (Max. 4.5 frames/sec.). When taking the pictures, the images appear (in sequence from the left) and recorded. ● ! The maximum file recording time, using the continuous shooting, is 12.5 seconds (when rec[...]

52 h Long-period continuous shooting with 1280 × 960-pixel mode Ａ Ｕ Ｔ Ｏ Ａ Ｕ Ｔ Ｏ ２ ５ ０ ２ ５ ０ Ｆ ５ ． ６ ３ ３ ３ ３ This mode allows you to take up to 40 continuous shots (at intervals as short as 1 second). In Long- period continuous shooting with 1280 × 960-pixel mode, the number of recorded pixels is set to [...]

53 Advanced Features Use this function for shots to get the correct brightness (exposure), such as shots with extremely high contrast between the subject and the background. Set the Power switch to “ q ”. 1 Set the Mode dial to “ N ”, “ M ” or “ < ” mode. 2 ２ ５ ０ ２ ５ ０ Ｆ ５ ． ６ ３ ３ ３ ３ Ｐ Ｉ Ｓ Ｏ ?[...]

54 E USING AE LOCK STILL PHOTOGRAPHY FUNCTIONS Use this function to take pictures with the exposure locked for a particular subject. Set the Power switch to “ q ”. 1 Set the Mode dial to “ B ”, “ ? ”, “ N ”, “ M ” or “ < ” mode. 2 3 ２ ５ ０ ２ ５ ０ Ｆ ５ ． ６ ３ ３ ３ ３ Ｐ Ｉ Ｓ Ｏ Ｉ Ｓ Ｏ   ?[...]

55 Advanced Features e MACRO ( CLOSE-UP ) STILL PHOTOGRAPHY FUNCTIONS Select Macro mode to take close-up shots. Set the Power switch to “ q ”. 1 Set the Mode dial to “ B ”, “ N ”, “ M ”, “ < ” or “ > ” mode. 2 3 Ａ Ｕ Ｔ Ｏ Ａ Ｕ Ｔ Ｏ ２ ５ ０ ２ ５ ０ Ｆ ５ ． ６ ３ ３ ３ ３ The Macro mode setti[...]

56 PHOTOGRAPHY INFORMA TION STILL PHOTOGRAPHY FUNCTIONS If you cannot recall the current photography settings, you can check them by holding down the “INFO” button. 1 1 Set the Power switch to “ q ”. 2 Set the Mode dial to Still photography mode. ３ ３ ３ ３ Ｉ Ｓ Ｏ     ２ ０ ０ Ｉ Ｓ Ｏ     ２ ０ ０ ２ ０ ０ ２[...]

57 Advanced Features Ｏ Ｆ Ｆ Ｏ Ｆ Ｆ Ａ Ｕ Ｔ Ｏ Ａ Ｕ Ｔ Ｏ ± １／３ １／３ Ｓ Ｅ Ｌ Ｓ Ｅ Ｌ Ｆ - Ｔ Ｉ Ｍ Ｅ Ｒ Ｅ Ｒ Ｏ Ｆ Ｆ Ｏ Ｆ Ｆ 3 When you enable the setting, an icon appears in the top-left corner of the screen. ● ! The settings available in the menu screen vary depending on the Still photogr[...]

58 STILL PHOTOGRAPHY MENU STILL PHOTOGRAPHY MENU * SELF-TIMER PHOTOGRAPHY 1 The self-timer is used in situations where the photographer is included in the shot. When selecting the self-timer setting, the self-timer icon appears on the screen. * : The picture is taken after 10 seconds. ( : The picture is taken after 2 seconds. ● ! The self-timer s[...]

59 Advanced Features Beep 1 Use this setting to set the white balance for the ambient natural or artificial lighting in images. Use this setting to achieve special effects also. 1 Select custom white balance “ O ” or “ P ”. 2 Press the “MENU/OK” button. A WHITE BALANCE Change the white balance setting to take a picture with the white ba[...]

60 3 When the correct exposure is measured, “ ç ” appears. Press the “MENU/OK” button to confirm the setting. Ｃ ＯＭ Ｏ Ｍ Ｐ Ｌ Ｅ Ｔ Ｅ Ｄ   ！ Ｐ Ｌ Ｅ Ｔ Ｅ Ｄ   ！ Ｓ Ｅ Ｔ Ｓ Ｅ Ｔ Ｃ Ａ Ｎ Ｃ Ｅ Ｌ Ｃ Ａ Ｎ Ｃ Ｅ Ｌ ＯＫ ＯＫ BACK BACK ● ! The specified custom white balance is retained[...]

61 Advanced Features Ｓ Ｅ Ｌ Ｅ Ｃ Ｔ   Ａ Ｆ   Ａ Ｒ Ｅ Ａ Ｓ Ｅ Ｌ Ｅ Ｃ Ｔ   Ａ Ｆ   Ａ Ｒ Ｅ Ａ 2 The AF frame appears in the location to which the target point was moved. Take the picture in the normal way. To reposition the AF frame, repeat step 1 . ２ ５ ０ ２ ５ ０ Ｆ ５ ． ６ ３ ３ ３ ３ Ｐ ?[...]

62 STILL PHOTOGRAPHY MENU STILL PHOTOGRAPHY MENU Use this setting to photograph the same image with different exposure settings. Bracketing shoots 3 continuous frames, one of which is correctly exposed while the remaining two are underexposed and overexposed respectively by a set amount. h Bracketing settings (3) ±1/3 EV, ±2/3 EV, ±1 EV See P.11[...]

63 Advanced Features Multiple exposure provides a way of overlaying images on top of each other to give a final image that cannot be got through normal photography. ● ! When the image is overexposed, use negative compensation in the Brightness (exposure compensation) setting to correct the exposure ( ➡ P.53). ● ! Only the optical zoom can be [...]

64 STILL PHOTOGRAPHY MENU STILL PHOTOGRAPHY MENU Select “ON” in this setting when using an external flash unit. Synchronized shutter speeds up to 1/1000 sec. can be used. ● ! The image may appear dark when the shutter speed is set to speeds higher than 1/1000 sec. ● ! Set the white balance ( ➡ P.59) to AUTO or Custom white balance ( ➡ P[...]

65 Advanced Features 4 MODE SELECT F ISO AU T O External flash settings (for flashes with automatic flash control) For external flash, refer to the user’s manual for the flash and specify the settings as described below. h Select External flash mode (TTL mode cannot be used). h Match the settings to the camera aperture setting. Set the flash for [...]

66 ● ! After you take the picture, please check the “Color (White Balance)” setting for the image. i Set “IMAGE DISP.” to “PREVIEW” in the SET-UP screen ( ➡ P.83). i Set the Power switch to “ w ” ( ➡ P.19). When the white balance is incorrect Adjust the white balance to match the external flash. In “ A ” in the Photography[...]

67 Advanced Features r RECORDING MOVIES MOVIE MODE 1 Set the Mode dial to “ r ”. Use “ r ” Movie mode to record movies with sound. h Specifications Motion JPEG with monaural sound Quality selection method % (640 × 480 pixels) $ (320 × 240 pixels) h Frame rate 30 frames per second ● ! Changing the quality (movie size) setting ( ➡ P.32)[...]

68 r RECORDING MOVIES MOVIE MODE 5 A counter appears in the top-right corner of the screen during recording shows the remaining time. ● ! If the brightness of the subject changes during movie recording, the sound of lens operation may be recorded. ● ! Some wind noise may be recorded in shots taken outdoors. ● ! When the remaining time runs ou[...]

69 Advanced Features Ｐ Ｌ Ａ Ｙ Ｐ Ｌ Ａ Ｙ PLA YING BACK MOVIES PLAYBACK MODE 1 1 Set the Power switch to “ w ”. 2 Press “ d ” or “ c ” to select the movie file. ● ! Movies cannot be played back using multi-frame playback. Use the “DISP” button to select single-frame playback. 2 1 Press “ b ” to play the movie. 2 The[...]

70 PLA YBACK INFORMA TION PLAYBACK FUNCTIONS ● ! This function cannot be used during multi-frame playback ( ➡ P.29). Use this function to check the photography information. Hold down the “ INFO ” button to check the information. １ ０ ０ − ０ ０ ０ ９ １ ０ ０ − ０ ０ ０ ９   ２ ／ １ ０ １ ０ ／ ２ ０ ０ ／ ?[...]

71 Advanced Features Ｂ Ａ Ｃ Ｋ Ｂ Ａ Ｃ Ｋ Ｅ Ｒ Ａ Ｓ Ｅ Ｅ Ｒ Ａ Ｓ Ｅ Ｆ Ｒ Ｆ Ｒ Ａ Ｍ Ｅ Ａ Ｌ Ｌ   Ｆ Ｒ Ａ Ｌ Ｌ   Ｆ Ｒ ＡＭ Ａ Ｍ Ｅ Ｓ Ｅ Ｓ 1 1 Set the Power switch to “ w ”. 2 Press the “MENU/OK” button to display the menu screen. 2 Press “ d ” or “ c ” to select “ o ”[...]

72 ＥＲＡＳＥ ＯＫ？ ＥＲＡＳＥ ＯＫ？ Ｙ Ｅ Ｓ Ｙ Ｅ Ｓ Ｃ Ａ Ｎ Ｃ Ｅ Ｌ Ｃ Ａ Ｎ Ｃ Ｅ Ｌ ＯＫ ＯＫ BACK BACK Ｆ Ｒ Ｆ Ｒ ＡＭ Ａ Ｍ Ｅ １ ０ ０ − ０ ０ ０ ９ １ ０ ０ − ０ ０ ０ ９ Pressing the “MENU/OK” button erases all the frames (files). ALL FRAMES ● ! Protected fram[...]

73 Advanced Features Ｆ Ｒ Ｆ Ｒ ＡＭ Ａ Ｍ Ｅ Ｐ Ｒ Ｏ Ｔ Ｅ Ｃ Ｔ Ｐ Ｒ Ｏ Ｔ Ｅ Ｃ Ｔ Ｓ Ｅ Ｔ   Ａ Ｌ Ｌ Ｓ Ｅ Ｔ   Ａ Ｌ Ｌ Ｒ Ｅ Ｓ Ｅ Ｔ   Ａ Ｌ Ｌ Ｒ Ｅ Ｓ Ｅ Ｔ   Ａ Ｌ Ｌ １ ０ ０ − ０ ０ ０ ９ １ ０ ０ − ０ ０ ０ ９ Ｐ Ｒ Ｏ Ｔ Ｅ Ｃ Ｔ   Ｏ Ｋ ？ ?[...]

74 Ｆ Ｒ Ｆ Ｒ ＡＭ Ａ Ｍ Ｅ １ ０ ０ − ０ ０ ０ ９ １ ０ ０ − ０ ０ ０ ９ Ｕ Ｎ Ｐ Ｒ Ｏ Ｔ Ｅ Ｃ Ｔ   Ｏ Ｋ ？ Ｕ Ｎ Ｐ Ｒ Ｏ Ｔ Ｅ Ｃ Ｔ   Ｏ Ｋ ？ Ｙ Ｅ Ｓ Ｙ Ｅ Ｓ Ｃ Ａ Ｎ Ｃ Ｅ Ｌ Ｃ Ａ Ｎ Ｃ Ｅ Ｌ ＯＫ ＯＫ BACK BACK 1 Press “ d ” or “ c ” to select the pro[...]

75 Advanced Features Ｐ Ｌ Ａ Ｙ Ｂ Ａ Ｃ Ｋ Ｐ Ｌ Ａ Ｙ Ｂ Ａ Ｃ Ｋ 2 Press “ d ” or “ c ” to select “ g ” PLAYBACK. Ｐ Ｌ Ａ Ｙ Ｂ Ａ Ｃ Ｋ Ｐ Ｌ Ａ Ｙ Ｂ Ａ Ｃ Ｋ 1 1 Set the Power switch to “ w ”. 2 Press the “MENU/OK” button to display the menu on the screen. ● ! The Power save function doe[...]

76 Ｏ Ｎ Ｖ Ｏ Ｉ Ｃ Ｅ   Ｖ Ｏ Ｉ Ｃ Ｅ   ＭＥＭ Ｍ Ｅ Ｍ Ｏ t RECORDING VOICE MEMOS PLAYBACK MENU 1 Voice memos can be added to still images. h Audio recording format: WAVE ( ➡ P.117) PCM recording format Audio file size: Approx. 480 KB (for a 30-second voice memo) 1 Set the Power switch to “ w ”. 2 Press “ d ” or[...]

77 Advanced Features After 30 seconds of recording, “ π ” appears on the screen. To finish: Press the “MENU/OK” button. To re-record your comment: Press the “BACK” button. 5 ◆ When the image already has a voice memo ◆ If you select an image that already has a voice memo, a screen appears in which you can select whether or not to re[...]

78 Ｐ Ｌ Ａ Ｙ Ｐ Ｌ Ａ Ｙ t PLA YING BACK VOICE MEMOS PLAYBACK MENU 1 1 Set the Power switch to “ w ”. 2 Press “ d ” or “ c ” to select an image file that has a voice memo. ● ! Voice memos can not be played back using multi-frame playback. Use the “DISP” button to select single-frame playback. 2 1 Press “ b ” to play [...]

79 Advanced Features u HOW TO SPECIFY PRINT OPTIONS ( DPOF ) p PHOTO MODE PLAYBACK DPOF stands for Digital Print Order Format and refers to a format that is used for recording printing specifications for images shot using a digital camera on media such as an xD-Picture Card and Microdrive. The recorded specifications include information on which fr[...]

80 Ｄ Ｐ Ｏ Ｆ Ｄ Ｐ Ｏ Ｆ Ｗ Ｉ Ｔ Ｈ   Ｄ Ａ Ｔ Ｅ Ｗ Ｉ Ｔ Ｈ   Ｄ Ａ Ｔ Ｅ Ｗ Ｉ Ｔ Ｈ Ｏ Ｕ Ｔ   Ｄ Ａ Ｔ Ｅ Ｗ Ｉ Ｔ Ｈ Ｏ Ｕ Ｔ   Ｄ Ａ Ｔ Ｅ 1 1 Set the Power switch to “ w ” . 2 Press the ( p ) button. 0 1 0 2 Press “ d ” or “ c ” to select “ u ” DPOF. 2 Ｄ Ｐ Ｏ Ｆ [...]

81 Advanced Features Ｓ Ｈ Ｅ Ｅ Ｔ Ｓ Ｓ Ｈ Ｅ Ｅ Ｔ Ｓ Ｄ Ｐ Ｏ Ｆ ： ０ ０ ０ ０ ９ Ｄ Ｐ Ｏ Ｆ ： ０ ０ ０ ０ ９ ０ １ ０ １ Ｓ Ｅ Ｔ Ｓ Ｅ Ｔ ＯＫ ＯＫ Ｆ Ｒ Ｆ Ｒ ＡＭ Ａ Ｍ Ｅ １ ０ ０ − ０ ０ ０ ９ １ ０ ０ − ０ ０ ０ ９ 4 1 Press “ d ” or “ c ” to display the [...]

82 Ｄ Ｐ Ｏ Ｆ   Ａ Ｌ Ｌ   Ｒ Ｅ Ｓ Ｅ Ｔ Ｄ Ｐ Ｏ Ｆ   Ａ Ｌ Ｌ   Ｒ Ｅ Ｓ Ｅ Ｔ Ｓ Ｅ Ｔ Ｓ Ｅ Ｔ 1 1 Set the Power switch to “ w ”. 2 Press the ( p ) button. 0 1 0 2 2 1 Press “ d ” or “ c ” to select “ U ” DPOF ALL RESET. 2 Press the “MENU/OK” button. 3 A message appears. To reset all t[...]

83 Settings W USING THE SET-UP SCREEN 1 1 Set Power switch to “ q ”. 2 Set the Mode dial to “ W ” to display the SET-UP menu. ● ! Always turn the camera off when replacing the batteries. Opening the battery cover or disconnecting the AC power adapter without turning the camera off may cause the camera settings to revert to the factory def[...]

84 SET -UP Press “ a ” or “ b ” to select a menu option and then press “ d ” or “ c ” to change the setting. ● ! Press “ c ” for “FORMAT”, “DATE/TIME”, “DISCHARGE” or “ q RESET”. 2 Ｐ Ｐ ＯＷ Ｏ Ｗ Ｅ Ｒ   Ｓ Ａ Ｖ Ｅ Ｅ Ｒ   Ｓ Ａ Ｖ Ｅ Ｆ Ｏ Ｆ Ｏ ＲＭ Ｒ Ｍ Ａ Ｔ Ａ Ｔ ２ ?[...]

85 Settings Ｒ Ｅ Ｃ Ｒ Ｅ Ｃ Ｆ Ｒ Ｆ Ｒ ＡＭ Ａ Ｍ Ｅ ＯＫ ＯＫ Ｐ Ｒ Ｅ Ｖ Ｉ Ｐ Ｒ Ｅ Ｖ Ｉ Ｅ Ｗ Ｃ Ａ Ｎ Ｃ Ｅ Ｌ Ｃ Ａ Ｎ Ｃ Ｅ Ｌ BACK BACK Ｐ Ｒ Ｅ Ｖ Ｉ Ｅ Ｗ Ｐ Ｒ Ｅ Ｖ Ｉ Ｅ Ｗ Ｒ Ｅ Ｃ Ｒ Ｅ Ｃ Ｃ Ａ Ｎ Ｃ Ｅ Ｌ Ｃ Ａ Ｎ Ｃ Ｅ Ｌ ＯＫ ＯＫ Ｂ Ａ Ｃ Ｋ ?[...]

86 Ｆ Ｏ Ｆ Ｏ ＲＭ Ｒ Ｍ Ａ Ｔ Ａ Ｔ Ｏ Ｋ Ｏ Ｋ Ｃ Ａ Ｎ Ｃ Ｅ Ｌ Ｃ Ａ Ｎ Ｃ Ｅ Ｌ Ｓ Ｅ Ｔ Ｓ Ｅ Ｔ Ｆ Ｏ Ｆ Ｏ ＲＭ Ｒ Ｍ Ａ Ｔ   Ｏ Ｋ ？ Ａ Ｔ   Ｏ Ｋ ？ Ｅ Ｒ Ａ Ｓ Ｅ   Ａ Ｌ Ｌ   Ｄ Ａ Ｔ Ａ Ｅ Ｒ Ａ Ｓ Ｅ   Ａ Ｌ Ｌ   Ｄ Ａ Ｔ Ａ ＯＫ ＯＫ SET -UP[...]

87 Settings ADAPTER SETTING Ｆ Ｆ ＲＡＭ Ｒ Ａ Ｍ Ｅ   Ｎ Ｅ   Ｎ Ｏ． Ｏ ． Ｃ Ｃ Ｄ − Ｒ Ａ Ｗ Ｃ Ｃ Ｄ − Ｒ Ａ Ｗ Ｃ Ｏ Ｎ Ｔ ． Ｃ Ｏ Ｎ Ｔ ． Ｏ Ｆ Ｆ Ｏ Ｆ Ｆ Ａ Ｄ Ａ Ｐ Ｔ Ｅ Ｒ Ｄ Ａ Ｐ Ｔ Ｅ Ｒ Ｎ Ｏ Ｎ Ｏ Ｄ Ａ Ｔ Ｅ Ｄ Ａ Ｔ Ｅ ／ Ｔ Ｉ Ｍ Ｅ Ｔ Ｉ Ｍ ?[...]

88 SET -UP FRAME NO. ( frame number storage ) Specifies whether frame numbers are assigned consecutively from previous numbers or begin again. CONT. : Pictures are stored beginning from the highest file number stored on the last media used. RENEW : Pictures are stored on each media beginning with a file number “ 0001 ” . Setting this function t[...]

89 Software Installation 5.1 THE SOFTW ARE COMPONENTS 5 Software Installation Launches the FinePixViewer software when a camera is connected. Used for videoconferencing (Windows only). Allows you to display thumbnail lists of the images stored on your PC or in the camera, print the images individually or as an index, display the images at full size[...]

90 5.2 INST ALLA TION ON A Windows PC Pre-installation checklist To run this software, you must have the hardware and software described below. Check your system before you begin the installation. ✽ 1 Models with a USB interface as a standard feature and one of the above operating systems preinstalled. ✽ 2 When you install the software, log in [...]

91 Software Installation 1 Install FinePixViewer as instructed in the Quick Start Guide. 2 After restarting the PC, install DirectX as directed by the on-screen instructions and restart your PC again. If the latest version of DirectX is already installed on your PC, this installation is not performed. 3 After restarting the PC, the “Installation [...]

92 5.3 INST ALLA TION ON A Mac OS 9.0 TO 9.2 1 Turn on your Macintosh and start up Mac OS 9.0 to 9.2. ● ! Do not connect the camera to your Macintosh until the software installation is completed. 3 When inserting the enclosed CD-ROM into the CD-ROM driver, the “FinePix” window opens. ● ! If the “FinePix” window does not open, double-cli[...]

93 Software Installation 2 Click the [Save] button. 5 The Installer setup screen appears. Click the [Installing FinePixViewer] button. ● ! For more information on what is installed, click the [Read Me First] button and [Using FinePixViewer] button. 8 Select the folder you want to install FinePixViewer. 1 Click the [Open] button to open the instal[...]

94 5.3 INST ALLA TION ON A Mac OS 9.0 TO 9.2 11 To install Acrobat Reader, click “Install Acrobat Reader”. ● ! Install Adobe Systems’ Acrobat Reader software to read the FinePixViewer User’s Guide (PDF). If the latest version already has been installed, this step is not required. 12 Proceed with the installation as directed by the on-scre[...]

95 Software Installation 5.4 INST ALLA TION ON A Mac OS X Pre-installation checklist To run this software, you must have the hardware and software described below. Check your system before you begin the installation. Compatible Mac Power Macintosh G3 ✽ 1 , PowerBook G3 ✽ 1 , Power Macintosh G4, iMac, iBook, Power Macintosh G4 Cube, or PowerBook[...]

96 5.4 INST ALLA TION ON A Mac OS X 8 Click the [Continue] button in the “Software License Agreement” window. FinePixViewer and RAW FILE CONVERTER LE are installed on Mac OS X. 1 Turn your Macintosh on and start up Mac OS X. Do not launch any other applications. 2 Insert the enclosed CD-ROM into the CD-ROM drive. The “FinePix” window opens.[...]

97 Software Installation 9 Click the [Continue] button. ● ! The software is installed in the “Applications” folder on the disk you want to install in. 10 Click the [Install (upgrade)] button. 11 Enter your administrator name and password and then click the [OK] button. 12 An installation progress window appears. (Installation may take several[...]

98 The “Connecting to a computer” section explains how to connect the camera to your computer using the USB cable (IEEE 1394 cable) and describes the functions you can use once the camera and computer are connected. 6.1.3 Connecting to a computer 1 A/V OUT (Audio/Visual output) socket 6.1.2 Connecting to a TV Turn off the camera and TV. Plug th[...]

99 Viewing Images If the power cuts out during data transmission, the data will not be transmitted correctly. Always use the AC power adapter when connecting the camera to a computer. For more information on using the software, refer to “How to use FinePixViewer” in the HELP menu which was installed from the CD-ROM. Refer to Section 5 the first[...]

100 6.1 CAMERA CONNECTION Ｄ Ｉ Ｓ Ｃ Ｈ Ａ Ｒ Ｇ Ｅ Ｄ Ｉ Ｓ Ｃ Ｈ Ａ Ｒ Ｇ Ｅ Ｏ Ｋ Ｏ Ｋ Ｒ Ｅ Ｓ Ｅ Ｔ Ｒ Ｅ Ｓ Ｅ Ｔ Ｏ Ｋ Ｏ Ｋ Ｕ Ｓ Ｂ   Ｍ Ｏ Ｄ Ｅ Ｕ Ｓ Ｂ   Ｍ Ｏ Ｄ Ｅ １ ３ ９ ４   Ｍ Ｏ Ｄ Ｅ １ ３ ９ ４   Ｍ Ｏ Ｄ Ｅ Ｓ Ｅ Ｔ − Ｕ Ｐ Ｓ Ｅ Ｔ − Ｕ [...]

101 Viewing Images ● ! The Windows CD-ROM may also be required during installation. In this event, change CD-ROMs as directed by the on-screen instructions. h FinePixViewer starts up. ✽ Screen for Windows 98 SE Windows 98/98 SE/Me/2000 Professional/Macintosh h A removable disk icon appears and you can use your PC to transfer files to and from t[...]

102 DC IN 5V socket USB socket (mini-B) 6.1 CAMERA CONNECTION 2 Left-click the Eject icon in the taskbar and select “USB Disk”. 3 The menu option shown below appears. Click on this option. 4 The “Safe To Remove Hardware” message box appears. Click the [OK] button or the close button. ✽ Screen for Windows Me ✽ Screen for Windows Me Macin[...]

103 Viewing Images 6.2 USING FinePixViewer For all information on FinePixViewer functions, refer to “How to Use FinePixViewer” in the Help menu for details. ■ Example: Looking up slide shows 1 Click “How to Use FinePixViewer” in the FinePixViewer Help menu. 2 Click “Basic Operation” and then click “ Basic Slide Show Operations” in[...]

104 Macintosh i Automatic uninstallation begins. When uninstallation ends, click the [OK] button. ● ! Only perform this operation when you no longer require the installed software or when the software was not installed correctly. Mac OS 9.0 to 9.2 ■ Uninstalling Mass Storage Driver and PC Camera Driver 1 Check that the camera is not connected t[...]

105 System Expansion Options (PC card slot) COMPACTFLASH DPC-CF T M fo r xD-Picture Card CARD ADAPTER Microdrive (commercially available) Image Memory Card Reader ( IEEE 1394 ) (PC card slot) PC Card Adapter xD-Picture Card FinePix S20 Pro Digital Camera Personal Computer (commercially available) ( USB ) ( IEEE 1394 ) < Image input/output to the[...]

106 Accessories Guide e Accessories (sold separately) can make taking pictures with the FinePix S20 Pro even easier. For information on how to attach and use accessories, refer to the instructions provided with the accessory used. Visit the FUJIFILM web site for the latest information on camera accessories. http://home.fujifilm.com/products/digital[...]

107 Using Y our Camera Correctly Power Supply and Batteries e Read this information and the “Safety Notes” ( ➡ P.118), to make sure you use your camera correctly. ■ Places to Avoid Do not store or use the camera in the following types of locations: h In the rain or in very humid, dirty or dusty places h In direct sunlight or in places subje[...]

108 Power Supply and Batteries Always use the AC Power Adapter AC-5VH/AC-5VHS with the camera. The use of an AC Power adapter other than AC- 5VH/AC-5VHS can be damaged to your digital camera. h Use AC power adapter for indoor use only. h Plug the connection cord plug securely into the DC input terminal of the FUJIFILM Digital camera. h Turn off the[...]

109 Ｄ Ｉ Ｓ Ｃ Ｈ Ａ Ｒ Ｇ Ｅ Ｄ Ｉ Ｓ Ｃ Ｈ Ａ Ｒ Ｇ Ｅ Ｏ Ｋ Ｏ Ｋ Ｃ Ａ Ｎ Ｃ Ｅ Ｌ Ｃ Ａ Ｎ Ｃ Ｅ Ｌ Ｓ Ｅ Ｔ Ｓ Ｅ Ｔ Ｄ Ｉ Ｓ Ｃ Ｄ Ｉ Ｓ Ｃ ＨＡ Ｈ Ａ Ｒ Ｇ Ｅ   Ｏ Ｋ ？ Ｒ Ｇ Ｅ   Ｏ Ｋ ？ Ｉ Ｔ   Ｉ Ｔ   Ｍ Ａ Ｙ   Ｔ Ａ Ｋ Ｅ   Ａ   Ａ Ｙ   Ｔ[...]

110 Notes on the Media (xD-Picture Card™ and Microdrives) ■ Image Memory Card h This Image Memory Card is a new image recording media ( xD-Picture Card ) developed for digital cameras. The Image Memory Card consists of a semiconductor memory (NAND-type flash memory) to record digital image data. The recording process is electrically performed a[...]

111 (Lit red) (Blinking red) The camera batteries are low or completely out of charge. Load new or fully charged batteries. There is a strong likelihood of camera shake because the shutter speed is slow. Use flash photography. Use a tripod for some scenes and modes. The AF (auto focus) cannot work effectively. i If the image is too dark, take the p[...]

112 W arning Displays i The voice memo file is faulty. i Camera fault. i The voice memo cannot be played back. i Contact your FUJIFILM dealer. CCD-RAW is set to ON in SET-UP. Set CCD-RAW to OFF in SET-UP ( ➡ P.83). The timing for recording was incorrect because the media was formatted on a computer. Use media that was formatted on the camera. You[...]

113 T roubleshooting e If you think the camera is faulty, check the following once more. Troubleshooting Possible causes Solutions i The batteries have run out. i The batteries are loaded backwards. i The battery cover is not closed properly. i The AC power adapter plug has come out of the power outlet. The batteries run out. i You are using the ca[...]

114 Troubleshooting Possible causes Solutions The image is blurred. There is speckling on the image. Can’t format the xD- Picture Card . Frame erase does not erase the frame. The ERASE ALL function does not erase all the frames. Nothing happens when I use the Mode dial. Screens are not displayed in English. There is no image or sound on the TV. T[...]

115 Specifications System Model Digital camera FinePix S20 Pro Effective pixels 6.2 million (S-pixel: 3.1million, R-pixel: 3.1million) pixels CCD 1/1.7-inch Super CCD SR Total 6.7 million (S-pixel: 3.35 million, R-pixel: 3.35 million) pixels Storage media xD-Picture Card (16/32/64/128/256/512 MB) Microdrive (340 MB/1 GB) File format Still image: DC[...]

116 Specifications h These specifications are subject to change without notice. FUJIFILM shall not be held liable for damages resulting from errors in this Owner’s Manual. h The LCD monitor on your digital camera is manufactured using advanced high-precision technology. Even so, small bright points and anomalous colors (particularly around text) [...]

117 Explanation of T erms AF/AE Lock: On the FinePix S20 Pro, pressing the Shutter button down half way locks the focus and exposure settings (AF and AE lock). If you want to focus on a subject that is not centered in the frame or change the picture composition after the exposure is set , you can obtain good results by changing the composition afte[...]

118 Safety Notes h Make sure that you use your FinePix S20 Pro camera correctly, read these Safety Notes and your Owner’s Manual carefully beforehand. h After reading these Safety Notes, store them in a safe place. About the Icons The icons shown below are used in this document to indicate the severity of the injury or damage that can result if t[...]

119 CAUTION Do not use this camera in locations affected by oil fumes, steam, humidity or dust. This can cause a fire or electric shock. Do not leave this camera in places subject to extremely high temperatures. Do not leave the camera in locations such as a sealed vehicle or in direct sunlight. This can cause a fire. Keep out of the reach of small[...]

Printed in Japan FGS - 305112 - FG Printed on recycled paper. 26 - 30, Nishiazabu 2 - chome, Minato - ku, Tokyo 106 - 8620, Japan http://home.fujifilm.com/products/digital/[...]