Fujitsu B19W-5 ECO manuale d’uso

English B19W-5 ECO Operating Manual Display[...]

Do you have ... ... any technical questions or problem s? Please contact: • our Hotline/Help Desk (please refer to the enclosed Help Desk list or look up the contact details on our website at: " http://ts. fujitsu. com/sup port/" ) • your sales partner • your sales of fi ce The latest information about our products, useful tips, up[...]

[...]

Copyright © Fujitsu Technology Solutions 2009 2009/06 Published by Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße 8 80807 München, Germany Contact http://ts.fujitsu.com/support All rights reserved, including intellectual property rights. T echnical data subject to modifi cations and delivery subject to availability . Any liability th[...]

FUJITSU B19W-5 ECO Y our LCD screen.. . 1 Important notes 3 Getting st arted 7 Operation 13 T roubleshooting 22 Notes regardi ng the DIN EN ISO 13406-2 standard 24 T echnical spe ci fi cation 25 Operating Manual[...]

VESA, DDC and DPMS are registered trademarks of the V ideo Electronics Standards Associati on. Copyright © Fujitsu T echnology Solutions GmbH 2009 All rights reserved, including rights of translation, reproduction by printing, copying or similar methods, in part or in whole. Offenders will be liable for damages. All rights reserved, including righ[...]

Content s Contents Y o u r L C D s c r e e n . . . ............................. ................... ................... .. 1 T a r g e t g r o u p ......................... ................... .................. .............. 1 F u r t h e r i n f o r m a t i o n ................... ................... .................. .............. 2 Notation[...]

Contents A26361-K1333-Z220-1-7619, edition 1[...]

Y our LCD screen... Y our LCD screen... has a whole range of useful features and functions, e.g.: • TFT display (Thin Film Transistor; active matrix) • minimal space requirements tha nks to slim casing • optimum ergonomic characteristics (totally distortion-free, excellent picture de fi nition and colour purity right into the corners) • hi[...]

Y our LC D screen... Further information Details of how you set the resolution and refresh rate are provided in the documentation for your display adapter and the associated driver software. For ergonomic reasons, a screen resolution of 1440 x 900 pixels is recommended. Because of the technology used (active m atrix) an LCD monitor provides a total[...]

Important notes Important notes Impor tantnotes Notes In this chapter you will fi nd information regarding safety which it is essential to take note of when working with your device. Safety instructions This device complies with the re levant safety regulations for data processing equipment, including electronic of fi ce ma chines for use in an o[...]

Important n otes • The device must only be operated in landsc ape mode (0°) and portrait mode (90°). The control buttons are located in the middle of the bottom of the monitor in landscape mode (0°) and at the left-hand side of the monitor i n portrait mode (90°). • Store this manual close to the device. If you pass the device on to third p[...]

Important notes CE marking The shipped version of this device complies with the requirements o f EEC directives 2004/108/EC "Electromagnetic compatibility" and 2006/95/EC "Low voltage directive". Energy Star EnergyStar The Fujitsu LCD colour monitor is equipped with a power management system which reduces the power draw in OF F [...]

Important n otes Disposal and recycling This device has been manufacture d as far as possible from materials w hich can be recycled or disposed of in such a way that the environment is not damaged. The device may be taken back after use to be reused or recycled, provided th at it is returned in a condition that be fi ts its intended use. Any compo[...]

Getting sta rted Getting started Unpacking and checking the delivery The display surface of the device is s ensitive to pressure and scratches. Always hold the device by the casing! The complete device package includes: • one monitor • one data cable (D-SUB) • one data cable (DVI-D) • one audio cable • one power cable • one CD with soft[...]

Getting started Setting up an ergonomic video w orkstation 1 ► Do not position the video workstation opposite a window (1). 1 ► Position the monitor outside the reach of a light source (1). 1 ► Position the keyboard where it is easiest to reach (1). 8 A26361-K1333-Z220-1-7619, edition 1[...]

Getting sta rted 1 50 cm ► Position the monitor so that the eye distance to the screen (1) is around 50 cm. 30 30 65 65 0 60 1 2 2 ► Position the monitor for optimum viewing (1). The monitor s hould under no circumstances fall outside the permissible viewing space ( 2). Depending on the situation, it may be advisable to use a swivel arm or wall[...]

Getting started Adjusting portrait format The monitor can be rotated from horizontal format (landscape mode) into vertical format (portrait mode). ► Grasp the monitor with both hands on the right and left edge of the casing, move it into the highest position and turn it clockwise until it is in the portrait position. For you to be able to display[...]

Getting sta rted Connecting the device Please observe the safety inform ation in "Import ant notes", P age 3 . CE conformance and optimum p icture quality are guaranteed only if you use the data cables supp lied. ► Switch off the monitor and the computer . ► Disconnect the power plug from the computer . Connecting cables to the mon it[...]

Getting started 1 2 3 4 1 = Power connector 2 = AUDIO- IN socket 3 = DVI-D socket (DVI) 4 = D-SUB socket (VGA) ► Connect one of the connectors of the data cable to th e D-SUB socket or DVI-D socket of the monitor and secure the plug-in connection by tighten ing the safety screws. The monitor automatically detects the input when only one signal so[...]

Operation Operation Switching the device on and off 2 1 1 = Power supply indicator 2 = ON/OFF switch ► Switch the device on using the ON /OFF switch. Press the buttons from the bottom upwards. Only switch on the comput er after you have switched on th e monitor . The colour of the LED indicator changes as follows: LED indicator Status blue Monito[...]

Operation Notes on power managem ent If your computer is equipped with power management ( power-saving m ode), the monitor can fully support this function. Here the monitor does not di stinguish between the individual energy-saving modes of the computer (standby mode, sus pend mode and OFF mode ), as it is capable of immediately switching into the [...]

Operation Changing the monitor settings When putting the monitor into operation for the fi rst time, the screen display should be optimally adapted to the disp lay adapter used. Changing the monitor settings with the buttons of the co ntrol panel The buttons of the control panel have two functions. W ith the OSD menu not activated, you can make th[...]

Operation Activate/deact ivate ECO operating mode The power consumption of the dev ice can be decreased by reducing the brightness of the picture. ► Press the Forwards / ECO button to switch the E CO operating mode on or off.  The message Action was e xecuted appears. If the ECO operating m ode is activated, the following OSD settings are ch a[...]

Operation The OSD menu is available in various languages. The English menu names are used in the following description (default setting). Y ou can select another language using the OSD Language function in the OSD Setup menu. ► Press the SELECT/MENU button to activate the OSD menu.  The main menu appears, with icons for the setting functions .[...]

Operation If you wish to change other settings, select the corresponding function from the OSD main menu. All possible adjustments of the main menu are described below . OSD menu functions The OSD menu for analogue monitor operation is described below . Du ring digital operation some functions are not available, they are not ne eded because of the [...]

Operation Adjusting the scr een size and positi on Callin g the Image adjust setting window H-position * Adjustment of the picture horizontal position With this function you c an move the picture t o the left or to the right. V -position * Adjusting the picture vertical position With this function you can move the picture up or down. Clock * Adjust[...]

Operation Adjusting the di splay of the OSD menu Calling the OSD Set up adjustment window Language Selecting the language for the OSD menu With this function you choose between English (default setting), French, German, Italian and Spanish as the language for the OSD menu. OSDH position Setting the horizontal position of the OSD menu With this func[...]

Operation Displa ying info rmation Call the Information setting window With this function the model designation, serial number , resolution, H/V frequency , input signal and polarity of the synchronisation signal are displayed. A26361-K1333-Z220-1-7619, edition 1 21[...]

T roubleshootin g T roubleshooting Should an error occur , fi rst check the following points. If the distortion is sti ll not eliminated, the monitor should, if possible, be checked on another computer . If you are unable to solve the problem, please inform our help desk. Having th is problem ? Check the follo wing points: No screen display Power [...]

T roubleshooting Having this p roblem? Check the foll owing points: Picture disturbances (horizont al lines, picture noise ) ► Press the EXIT / AUTO bu tton to perform auto-adjustment of the screen. The screen becomes darker The background lighting has a limited lifetime. If your monitor display should become too da rk, the background lighting wi[...]

Notes regarding the DIN EN ISO 13406- 2s t a n d a r d Notes regarding the DIN EN ISO 13406-2 standard Permanently unlit or lit pixels The standard of production techniques tod ay ca nnot guarantee an absolutely fault-free screen display . A few isolated constant lit or unlit pixels (picture elements) may be present. The maximum permitted number of[...]

T echnical speci fi cation T echnical sp eci fi cation Condensation is not permitted, neither in the rated range of operation nor in the limit range of operation. B19W-5 ECO Dimensions and w eight Visible diagonals 48.3 cm Dot pitch 0.285 mm Width 410 mm Image size Height 256 mm Maximum resolution 1440 x 900 Width 443 mm Height 354.3 mm Dimension[...]

T echnical speci fi cation Ambient condition s Environment class 3K2, DIN IEC 721 Rated range of operation Humidity 15 °C .... 35 °C 20 % .... 85 % Limit range of operation Humidity 5 °C .... 35 °C 20 % .... 85 % VESA-DDC-compatible VGA interface Y our monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Vi deo Electronics S[...]

T echnical speci fi cation SUB D port 6 10 11 15 51 Pin Meaning 1 Video input red 2 Video input green 3 Video input blue 4 Ground 5 Ground 6 Video ground red 7 Video ground green 8 Video ground blue 9 +5 V (DDC) 10 Sync. ground 11 Ground 12 DDC Data 13 H. sync 14 V . sync 15 DDC Clock A26361-K1333-Z220-1-7619, edition 1 27[...]

T echnical speci fi cation DVI-D port 9 1 17 Pin Meaning 1 TMDS Data2– 2 TMDS Data2+ 3 TMDS Data 2/4 S hield 4 not connected 5 not connected 6 DDC Clock 7 DDC Data 8 Analog V ertical Sync 9 TMDS Data1– 10 TMDS Data1+ 11 TMDS Data 1/3 S hield 12 not connected 13 not connected 14 +5V Power 15 Earth 16 Hot Plug Detect 17 TMDS Data0– 18 TMDS Dat[...]