Fujitsu B22W-5 ECO manuale d’uso

English B22W-5 ECO Operating Manual Display[...]

Do you have ... ... any technical questions or problems? Please contact: • our Hotline/Help Desk (please refer to the enclosed Help D esk list or look up the contact details on our website at: " http://ts. fujitsu . com/sup port/" ) • your sales partner • your sales of fi ce The latest information about our products, useful tips, u[...]

[...]

Copyright © Fujitsu Technology Solutions 2009 2009/06 Published by Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße 8 80807 München, Germany Contact http://ts.fujitsu.com/support All rights reserved, including intellectual property rights. T echnical data subject to modifi cations and delivery subject to availability . Any liability th[...]

FUJITSU B22W-5 ECO Y our LCD screen... 1 Important notes 3 Getting started 7 Operation 13 Notes on ergonomic colour adjustment 21 T roubleshoot ing 22 Notes regar ding the D IN EN ISO 13406-2 standard 24 T echnical speci fi cation 25 Operating Manual[...]

VESA, DDC and DPMS are registered trademarks of the Video El ectronics Standards Association. Copyright © Fujitsu T echnology Solutions GmbH 2009 All rights reserved, including rights of tran slation, reproduction by pri nting, copying or similar methods, in part or in wh ole. Offenders will be liable for damages. All rights reserved, including ri[...]

Content s Contents Y o u r L C D s c r e e n . . . .......... ................... ................... ................... .. 1 T a r g e t g r o u p ..................... ................... ................... ................. 1 F u r t h e r i n f o r m a t i o n .......................... ................... ................... ...... 2 Notatio[...]

Contents A26361-K1320-Z220-1-7619, edition 2[...]

Y our LCD screen... Y our LCD screen... has a whole range of useful features and functions, e.g.: • TFT display (Thin Film Transis tor; active matrix) • minimal space requirements tha nks to slim casing • optimum ergon omic characteristics (totally distortion-free, excellent picture de fi nition and colour purity right into th e corners) •[...]

Y our LCD screen... Further i nformation Details of how you set the resolution an d refresh rate are provided in the documentation for your display adapter and t he associated driver software. For ergonomic reasons, we recommend a screen reso lution of 1680 x 1050 pixels. Because of the technology used (active matrix) an LCD monitor provides a to t[...]

Important notes Important notes Impor tantnotes Notes In this chapter you will fi nd information regarding safety which it is essential to take no te of when working with your device. Safety instructions This device complies with the re levant safe ty regulations for data processing equipment, including electronic of fi ce ma chines for use in an[...]

Important note s • The device may only be operated in t he wide format (0° landscape mode). The buttons of the co ntrol panel are loca ted at the bottom in the middle of the monitor . • Store this manual close to the device. If you pass the device on to third parties, you should pass this manual on with it. • We recommend that you place your[...]

Important notes CE marking The shipped version of this device complies with the requirements of EEC directives 2004/108/EC "Electromagnetic compatibility" and 2006/95/EC "Low voltage directive". Energy Star EnergyStar The Fujitsu LCD colour monitor is equipped with a po wer management system which reduces the p ower draw in OFF [...]

Important note s Disposal and recycling This d evice has been manufacture d as far as possible from materials w hich can be recycled or disposed of in such a way th at the environment is not damaged. The device may be taken back after use to be reu sed or recycled, provided th at it is returned in a co ndition that be fi ts its intended use. Any c[...]

Getting started Getting started Unpacking and checking the delivery The display surface of the device is s ensitive to pressure and scratches. Always ho ld the device by the casing! The complete device packag e includes: • one monitor • one data cable (D-SUB) • one data cable ( DVI-D ) • one audio cable • one power cable • one C D with [...]

Getting s tarted Setting up an ergonomic video w orkstation 1 ► Do not position the video worksta tion opposite a window (1). 1 ► Position the monitor outside the reach of a light source (1). 1 ► Position the keyboard where it is easiest to reach (1). 8 A26361-K1320-Z220-1-7619, edition 2[...]

Getting started 1 50 cm ► Position the monitor so that the eye distance to the screen (1) is a round 50 cm. 30 30 65 65 0 60 1 2 2 ► Position the monitor for optimum viewing (1). The monitor should under no circumstances fall outside the permissible viewing space (2). Depending on the situation, it may be a dvisable to use a swivel arm or wall [...]

Getting s tarted Removing monitor base Before you can use a swivel arm or a wall brac ket, you must remove the monitor base. The display surface is su sceptible to scratching! ► Switch off the monitor and pull the power plug out of the po wer socket. ► Lay the monitor on its face on a soft surface. ► Remove the cover and disconn ect all cable[...]

Getting started 1 = Power connector 2 = AUDIO-IN socket 3 = DVI-D connector (DIGIT AL) 4 = D-SUB socket (ANALOG) 5 = Security slot for "Kensington Lock" 6 = Holes for fi xing swivel arm or wall bracket ► Select the data cable which is suitable for your computer . ► Connect one of the connectors of the data cable to the D-SUB socket o[...]

Getting s tarted Connecting cables to the computer Information on the computer connections and interfaces is contained in the operating manual for your computer . ► Connect the data cable to the (active) monitor port on the computer and secure the plug-in connection by tightening the safety screws. ► Insert the othe r plug of the audio cable in[...]

Operation Operation Switching the device on and off 1 = Buttons for the OSD menu (On-Screen Display) 2 = Power supply indicator 3 = ON/OFF switch Press the buttons upwards from below . The colour of the LED indicator changes as follows: LED indicator Status blue Monitor and compu ter are switched on (normal mode). green Monitor and computer are swi[...]

Operation ► Switch the device on using the ON/OFF switch. Only switch on the computer after you ha ve switched on the monitor . Notes on power management If your comput er is equipped with po wer management ( power-saving mode), the monitor can fu lly support this function. Here the monitor does not di stinguish between the individual energy-savi[...]

Operation Changing the monitor settings When putting the monitor into operation for the fi rst time, the screen display should be optimally adapted to the disp lay adapter used. Changing the monitor settings with the buttons of the co ntrol panel The b uttons of the control panel have two functions. With th e OSD men u not activated, you can make [...]

Operation Activate/deact ivate ECO operating mode The power consumption of the dev ice can be decreased by reducing the brightness of the picture. ► Press the Forwards / ECO button to switch the ECO operating mode on or off.  The message Action was executed appea rs. If the ECO operating mode is activated , th e following OSD settings are chan[...]

Operation ► Press the SELECT/MENU button to activate the OSD menu.  The main menu appears, with icons for the setting functions. The fi rst icon, ( Brightness/Contrast ), is highlighted and the associated functions a re visible in the right-hand menu fi eld. ► Press the Forwards / ECO button or the Back / INPUT button to highlight another [...]

Operation OSD menu functions The OSD menu for analogue monitor operation is described below . During digital operation some functions are not available, they are not needed be cau se of the digital transmission technology being used. Adjusting the brightness and contrast Call up the Brightness/Contrast setting window Brightness Set the brightness o[...]

Operation Adjust in g the vol ume Call the Audio setting window Vo l u m e Set the volume for playback with the integrated loudspeakers Mute Switch the loudspeakers off or on Setting the colour temperature and colours Call the Colour setting window Select the colour temperature The "warmth" of the screen colours is set using the colour te[...]

Operation Setting functions in the Advanced menu Call up the Advance d setting window Input select Selecting the input signal This function allows you to switch the monitor from analogue to digital mode and vice versa, when two signal sources are connected . This requires that the graphic card used supports this function. DDC-CI Activation/deactiva[...]

Notes on ergonomic c olo ur ad just men t Notes on ergonomic colour adju stment If you select colours for the monitor in your a pplication programmes, take note of the information below . The primary colours blue and red on a dark background do not produce the minimum required contrast of 3:1 and are therefore not suitable for continuous text and d[...]

T roubleshootin g T roubleshooting Should an error occur , fi rst check the following points. If the distortion is still not eliminated, the monitor should, if possible, be checked on another compute r. If you are unable to solve the problem, please inform our help desk. Having this problem? Check the follo wing points: No screen display Power ind[...]

T roubleshooting Having this problem? Check the follow ing points: Picture disturbances (vertical lines) ► Press the EXIT / AUTO button to perform auto-adjustment of the screen. Picture disturbances (horizontal lines, picture noise ) ► Press the EXIT / AUTO button to perform auto-adjustment of the screen. The screen becomes darker The backgroun[...]

Notes regarding the D IN EN ISO 13406- 2s t a n d a r d Notes regarding the DIN EN ISO 13406-2 standard Permanently unlit or lit pixels The standard of production techniques today ca nnot g uarantee an absolutely fault-free screen display . A few isolated constant lit or unlit pixels (p icture elements) may be present. The maximum permitted number [...]

T echnical speci fi cation T echnical speci fi cation Condensation i s not permitted, neither in the rated range of operation nor in the limit range of operation. B22W-5 ECO Dimensions and w eigh t Visible diagonals 55.9 cm Dot pitch 0.28 mm Width 473.76 mm Image size Height 296.1 mm Maximum resolution 1680 x 1050 Width 51 1 mm Height 401.5 mm - [...]

T echnical speci fi cation Environmental conditions Environment class 3K2, DIN IEC 721 Rated range of operation Humidity 15 °C .... 35 °C 20 % .... 85 % Limit range o f operation Humidity 5 °C .... 35 °C 20 % .... 85 % VESA-DDC-compatible VGA interface Y our monitor is equipped with a VESA-D DC-comp atible VGA interface. VESA-DDC (Video Electr[...]

T echnical speci fi cation SUB D port 6 10 11 15 51 Pin Meaning 1 Video input red 2 Video input green 3 Video input blue 4 Ground 5 Ground 6 Video ground red 7 Video ground green 8 Video ground blue 9 +5 V ( DDC) 10 Sync. ground 11 Ground 12 DDC Data 13 H. sync 14 V . sync 15 DDC Clock A26361-K1320-Z220-1-7619, edition 2 27[...]

T echnical speci fi cation DVI-D port 9 1 17 Pin Meaning 1 TMDS Data2– 2 TMDS Data2+ 3 TMDS Data 2/4 Shield 4 not connected 5 not connected 6 DDC Clock 7 DDC Dat a 8 Analog V ertical Sync 9 TMDS Data1– 10 TMDS Data1+ 11 TMDS Data 1/3 Shield 12 not connected 13 not connected 14 +5V Power 15 Earth 16 Hot Plug Detect 17 TMDS Data0– 18 TMDS Data[...]