Fujitsu B24W-5 manuale d’uso

English B24W-5 ECO Operating Manual Display[...]

Do you have ... ... any technical questions or problem s? Please contact: • our Hotline/Help Desk (please refer to the enclosed Help Desk list or look up the contact details on our website at: " http://ts. fujitsu. com/sup port/" ) • your sales partner • your sales of fi ce The latest information about our products, useful tips, up[...]

[...]

Copyright © Fujitsu Technology Solutions 2009 2009/08 Published by Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße 8 80807 München, Germany Contact http://ts.fujitsu.com/support All rights reserved, including intellectual property rights. T echnical data subject to modifi cations and delivery subject to availability . Any liability th[...]

FUJITSU B24W-5 ECO Y our LCD screen.. . 1 Important notes 3 Getting st arted 7 Operation 13 Notes on ergonomic c olour adjustment 21 T roubleshoot ing 22 Explanatory inf ormation about standard ISO 9241-3 24 T echnical dat a 25 Operating Manual[...]

VESA, DDC and DPMS are registered trademarks of the V ideo Electronics Standards Associati on. Copyright © Fujitsu T echnology Solutions GmbH 2009 All rights reserved, including rights of translation, reproduction by printing, copying or similar methods, in part or in whole. Offenders will be liable for damages. All rights reserved, including righ[...]

Content s Contents Y o u r L C D s c r e e n . . . ............................. ................... ................... .. 1 T a r g e t g r o u p ......................... ................... .................. .............. 1 F u r t h e r i n f o r m a t i o n ................... ................... .................. .............. 2 Notation[...]

Contents A26361-K1334-Z220-1-7619, edition 1[...]

Y our LCD screen... Y our LCD screen... has a whole range of useful features and functions, e.g.: • TFT display (Thin Film Transistor; active matrix) • minimal space requirements tha nks to slim casing • optimum ergonomic characteristics (totally distortion-free, excellent picture de fi nition and colour purity right into the corners) • hi[...]

Y our LC D screen... Further information Details of how you set the resolution and refresh rate are provided in the documentation for your display adapter and the associated driver software. For ergonomic reasons, a screen resolution of 1920 x 1200 pixels is recommended. Because of the technology used (active m atrix) an LCD monitor provides a tota[...]

Important notes Important notes Impor tantnotes Notes In this chapter you will fi nd information regarding safety which it is essential to take note of when working with your device. Safety instructions This device complies with the re levant safety regulations for data processing equipment, including electronic of fi ce ma chines for use in an o[...]

Important n otes • The device may only be operated in the wide format (0° landscape mode). The butt ons of the control panel are located at the bottom in the middle of the monitor . • Store this manual close to the device. If you pass the device on to third parties, you should pass this manual on with it. • We recommend that you place your d[...]

Important notes CE marking The shipped version of this device complies with the requirements o f EEC directives 2004/108/EC "Electromagnetic compatibility" and 2006/95/EC "Low voltage directive". Energy Star EnergyStar The Fujitsu LCD colour monitor is equipped with a power management system which reduces the power draw in OFF m[...]

Important n otes Disposal and recycling This device has been manufacture d as far as possible from materials w hich can be recycled or disposed of in such a way that the environment is not damaged. The device may be taken back after use to be reused or recycled, provided th at it is returned in a condition that be fi ts its intended use. Any compo[...]

Getting sta rted Getting started Unpacking and checking the delivery The display surface of the device is s ensitive to pressure and scratches. Always hold the device by the casing! The complete device package includes: • one monitor • one data cable (D-SUB) • one data cable (DVI-D) • one audio cable • one power cable • one CD with soft[...]

Getting started Setting up an ergonomic video w orkstation 1 ► Do not position the video workstation opposite a window (1). 1 ► Position the monitor outside the reach of a light source (1). 1 ► Position the keyboard where it is easiest to reach (1). 8 A26361-K1334-Z220-1-7619, edition 1[...]

Getting sta rted 1 50 cm ► Position the monitor so that the eye distance to the screen (1) is around 50 cm. 30 30 65 65 0 60 1 2 2 ► Position the monitor for optimum viewing (1). The monitor s hould under no circumstances fall outside the permissible viewing space ( 2). Depending on the situation, it may be advisable to use a swivel arm or wall[...]

Getting started Removing monitor base Before you can use a swivel arm or a wall brac ket, you must remove the monitor base. The display surface is susceptible to scratching! ► Switch off the monitor and pull the power plug out of the power so cket. ► Lay the monitor on its face on a s oft surface. ► Remove the cover and disconnect all cables.[...]

Getting sta rted Connecting the device Please observe the safety inform ation in "Import ant notes", P age 3 . CE conformance and optimum p icture quality are guaranteed only if you use the data cables supp lied. ► Switch off the monitor and the computer . ► Disconnect the power plug from the computer . Connecting cables to the mon it[...]

Getting started ► Connect one of the connectors of the data cable to th e D-SUB socket or DVI-D socket of the monitor and secure the plug-in connection by tighten ing the safety screws. The monitor automatically detects the input when only one signal source is connected. ► Insert one plug of the audio line in the AUDIO IN socket on the monitor [...]

Operation Operation Switching the device on and off 1 = Buttons for the OSD m enu (On-Screen Display) 2 = Power supply in dicator 3 = ON/OFF switch Press the butto ns upwards from below. The colour of th e LED indicator changes as follows: LED indicator Status blue Monitor and computer are switched on (normal mode). green Monitor and com puter are [...]

Operation Front Re ar 12 1 = power supply indicator 2=O N / O F Fs w i t c h ► Switch the device on using the ON/OFF s witch. Only switch on the computer after you have switched on the monitor . Notes on power managem ent If your computer is equipped with power management ( power-saving m ode), the monitor can fully support this function. Here th[...]

Operation Changing the monitor settings When putting the monitor into operation for the fi rst time, the screen display should be optimally adapted to the disp lay adapter used. Changing the monitor settings with the buttons of the co ntrol panel The buttons of the control panel have two functions. W ith the OSD menu not activated, you can make th[...]

Operation Activate/deact ivate ECO operating mode The power consumption of the dev ice can be decreased by reducing the brightness of the picture. ► Press the Forwards / ECO button to switch the E CO operating mode on or off.  The message Action was e xecuted appears. If the ECO operating m ode is activated, the following OSD settings are ch a[...]

Operation The OSD menu is available in various languages. The English menu names are used in the following description (default setting). Y ou can select another language using the OSD Language function in the OSD Setup menu. ► Press the SELECT/MENU button to activate the OSD menu.  The main menu appears, with icons for the setting functions .[...]

Operation If you wish to change other settings, select the corresponding function from the OSD main menu. All possible adjustments of the main menu are described below . OSD menu functions The OSD menu for analogue monitor operation is described below . Du ring digital operation some functions are not available, they are not ne eded because of the [...]

Operation Adjusting the scr een size and positi on Callin g the Image adjust setting window H-position * Adjustment of the picture horizontal position With this function you c an move the picture t o the left or to the right. V -position * Adjusting the picture vertical position With this function you can move the picture up or down. Clock * Adjust[...]

Operation Adjusting the di splay of the OSD menu Calling the OSD Set up adjustment window Language Selecting the language for the OSD menu With this function you choose between English (default setting), French, German, Italian and Spanish as the language for the OSD menu. OSDH position Setting the horizontal position of the OSD menu With this func[...]

Notes on ergono mic colour adjustmen t Notes on ergonomic colour adju stment If you select colours for the monitor in your application programmes, take note of the information below . The primary colours blue and red on a dark background do not produce the mi nimum required contrast of 3:1 and are therefore not suitable for continuous text and data[...]

T roubleshootin g T roubleshooting Should an error occur , fi rst check the following points. If the distortion is sti ll not eliminated, the monitor should, if possible, be checked on another computer . If you are unable to solve the problem, please inform our help desk. Having th is problem ? Check the follo wing points: No screen display ► Ch[...]

T roubleshooting Having this p roblem? Check the foll owing points: Picture disturbances (vertical lines) ► Press the EXIT / AUTO button to pe rform auto-adjustment of the screen. Picture disturbances (horizontal lines, picture noise ) ► Press the EXIT / AUTO bu tton to perform auto-adjustment of the screen. The screen becomes darker The backgr[...]

Explanatory informatio n about stan dard ISO 9241-3 Explanatory information abou t standard ISO 9241-3 Lit or unlit pi xels T oday’s production techniques cannot guarantee an absolutely fault-free screen display . A few isolated pixels may be constantly lit or unlit. The maximum permitted number of faulty pixels is stipulated in the international[...]

T echnical data T echnical data Condensation is not permitted, neither in the rated range of operation nor in the limit range of operation. B24W-5 ECO Dimensions and we ight Visible diagonals 61 cm Dot pitch 0.27 mm Width 518.4 mm Image size Height 320.4 mm Maximum resolution 1920 x 1200 Width 558 mm Height 414 mm - 523 mm Dimensions incl. monitor [...]

T echnical data Ambient condition s Environment class 3K2, DIN IEC 721 Rated range of operation Humidity 15 ℃ .... 35 ℃ 20 % .... 85 % Limit range of operation Humidity 5 °C .... 35 °C 20 % .... 85 % VESA-DDC-compatible VGA interface Y our monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Vi deo Electronics Standard Asso[...]

T echnical data D-SUB port 6 10 11 15 51 Pin Meaning 1 Video input red 2 Video input green 3 Video input blue 4 Ground 5 Ground 6 Video ground red 7 Video ground green 8 Video ground blue 9 +5 V (DDC) 10 Sync. ground 11 Ground 12 DDC Data 13 H. sync 14 V . sync 15 DDC Clock A26361-K1334-Z220-1-7619, edition 1 27[...]

T echnical data DVI-D port 9 1 17 Pin Meaning 1 TMDS Data2– 2 TMDS Data2+ 3 TMDS Data 2/4 S hield 4 n ot connected 5 not connected 6 DDC Clock 7 DDC Data 8 Analog V ertical Sync 9 TMDS Data1– 10 TMDS Data1+ 11 TMDS Data 1/3 S hield 12 not connected 13 not connected 14 +5V Power 15 Earth 16 Hot Plug Detect 17 TMDS Data0– 18 TMDS Data0+ 19 TMDS[...]