Fujitsu fi-4860C manuale d’uso

In sta ll at i o n Gu i de f i-4860C Ima g e Scanne r P3 PC-E177- 0 3 EN[...]

● i Thank you for purchasing the fi -4860C Duplex Color Scanner . The fi-4860C is an image scanner designed to scan docum ents in large quantities. The fi-4860C has t he following features.  High speed, high quality color scanning cap abilities Scans documents of Letter and A4 size at the speed of 60ppm/120ipm @200dpi.  Highly reliable docu[...]

● ii The contents of t he Operator ’ s Guide is as follows: 1. B ASIC SCANNER OPERA TIONS This chapter describes basic sc anner operations including basic document scanning. 2. SCANNING V ARIOU S TYPES OF DOCUMENTS This chapter describes how to scan various type of documents. 3. D AIL Y CARE This chapter describes how to clean the scanner . 4. [...]

● iii ■ Regulatory Information FCC dec laration This equipment has been tested and found to co mply with the limi ts for a Class A digital device, pursuant to Part 15 of the FC C Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipme[...]

● iv Bescheimigung des Her stellers / Importeurs Hiermit wird bescheinigt, daß der/dieldas • fi-4860C in Übereinsstim mung mit den Bestimmungen der • AmtsblVfg 243/1991 funkent stört ist. Der Deut schen Bundesport wurde das Inverkehrbringen dieses Gerätes angezeigt und die Berechtigung zur Überprüfung der Serie auf Einhaltung der Bestim[...]

● v International E NERGY S TA R ® Pr ogram As an E NERGY S T AR® Partner , PFU LIMITED has determined that this product meets the E NERGY S T AR® guidelines for energy efficiency . The International E NERGY S T AR® Office Equipment Program is an international program th at promotes energy saving through the penetration of energy efficient co[...]

● vi About the use of mer cury The scanner lamp contains mercury . T oo avoid unexpected injury , read the followings carefully . Doing following actions may result in serious personal injuries: • Do not put the substance in the lamp in your mouth as it contains mercury . • Do not incinerate, crus h, or shred the scanner . • Do not breath t[...]

● vii T rademarks Microsoft, Windows and Wi ndows NT are registered trademarks of Microsof t Corporation of th e USA and other respective countries. ISIS is a registered trademark of Pixel T ranslations, A Division of Actionpoint Inc. Adobe and the Adobe logo as well as Acrobat and th e Acrobat Logo are trademarks of Adobe Systems Incorporated. O[...]

● viii ■ Note, Liability READ ALL OF THIS MANUAL CAREFU LL Y BEFORE USING THIS PRODUCT . IF NOT USED CORRECTL Y , UNEXPECT ED INJURY MA Y BE CAUSED TO USERS OR BY ST ANDERS. While all effort s have been made to ensure t he accuracy of all in formation in this manual, PFU LIMITED assumes no liability to any pa rty for any damage caused by errors[...]

● ix ■ Preface Safety Precautions This manual describes important det ails fo r ensuring the safe and correct use of this product. Thoroughly read this manual before you star t to use this product. In particular , be sure to read and fully under stand the Safety Prec autions described in this manual before you use this product. Also, store this[...]

● x Symbols Used In This Manual This manual uses the follo wing symbols in explanations in addition to warning indications. ATTENTION This symbol alerts operators to p articularly important informa- tion. Be sure to read this information. HINT This symbol alerts operators to help ful advice regarding oper- ation. A TRIANGLE symbol indicates t hat[...]

● xi Screen Examples In This Manual The screen examples in th is manual are subject to change without notice in the interest of product improvement. If the actual displayed scr een diff ers from the screen examples in this manual, operate by following the actual displayed screen referring to the User's Manual of the scanner application you a[...]

● xii ■ Safety Precautions WARNING The following describes important wa rnings described in this manual. Do not touch the A C cable with wet hands. Do not damage the A C cable. Use only speci fied A C ca bles and connector cab les Do not insert or disconnect the power plug with wet hands. Doing so might cause electric shock. A damaged AC cable [...]

● xiii Use this scanner onl y at the indicated po wer vo ltage . Do not connect to m ultiple-power strips. Wipe an y dust from the power plug. Do not install in locations subject to oil smoke, steam, humidity , and dust. Do not use the scanner i f y ou smell strange odor . T urn the scanner OFF if it is damaged. Use this scanner only at the indi [...]

● xiv Do not put liquids inside the scanner . Do not insert or drop metal objects in to the scanner . Do not scan wet documents or document with paper clip s or staples. Do not splash or allo w the scanner to get wet. If foreign objects (water , small meta l object s, liquids, et c.) get inside the scanner , immediately turn off the scanner and d[...]

● xv Do not touch the inside of the scanner un less necessary . CAUTION The following describes important cautions described in this manual. Do not install the scanner on unstable surfaces. Firmly insert the power plug. Do not take ap art or modify t he scanner . The inside of the scanner contains high-volt age components. T o uching th ese compo[...]

● xvi Do not bloc k the ventilation por ts. Do not place heavy obj ects or c limb on top of the scanner . Bef ore mo ving the scanner , disconne ct the po wer plug from the po wer outlet. Pr otect the scanner fr om static electricity . Do not block the ventilation ports. Bl ocking the ventilation port s generates heat inside of scanner , that may[...]

● xvii Do not use aer osol sprays near the scanner . A v oid any contact when scanner is in use. Disconnect the po wer plug from the po wer outlet when the scanner is not used f or a long period of time . Do not install the scanner in the direct sunlight. Do not carry alone . Do not use aerosol sprays to clean the scanner . Aerosol sprays cause d[...]

● xviii ■ Fujitsu Gr oup Offices Please send your co mments on this manual or on Fuji t su products to the following addresses: FUJITSU COMPUTER PRODUCTS OF AMERICA, INC. 2904 Orchard Parkway , San Jose, CA 95134- 2009, U.S.A. Phone: (1-800)591-5924; (1-408)432-6333 T echnical Assista nce Center: (1-800)626-4686 Fax: (1-408)894-1709 Website: h [...]

● xix FUJITSU T AIW AN L TD. 19th Fl., No39, Sec.1,Chung-hwa Rd., T aip e i, T a iwan Phone: (886-2)231 1-2255 Fax: (886-2)231 1-2277 Website: ht tp://tw .fujitsu.com/ FUJITSU HONG KONG L TD. 10/F ., Lincoln House, 979 King's Road, T aikoo Place, Island East, Hong Kong Phone: (852)2827-5780 Fax: (852)2827-4724 Website: h ttp://hk.fujitsu.com[...]

● xx[...]

● xxi 1 SCANNER BASICS ........... ........................... 1 Checking the Contents of the Scanner Package .... .............. ............. 2 Names and Functions of Parts ............ ................. ................ ............. 3 Operator Panel ...... ................................ ............................... .............6 2 INSTA[...]

● xxii[...]

1 1 SCANNER BASICS This chapter describes how to prep are the scanner before use. 1.1 Checking the Content s of th e Scanner Package . ............... 2 1.2 Names and Functions of Part s ..... ............... ......................... 3 1.3 Operator Panel ........ ................................. .............................. 6[...]

2 1.1 Checking the Contents of the Scanner P ackage 1.1 Chec king the Contents of the Scanner P ac kag e When you unpack the scanner p ackage, make sure that all the following parts are included in the package. If any p arts are missi ng or defective, contac t to the distributer where you purchased the scanner from. Please handle the scanner and th[...]

3 1.2 Names and Functions of P ar ts 1 SCANNER BASICS 1.2 Names and Functions of P ar ts This section describes the name s of parts and their functions. ■ Units                     [...]

4 1.2 Names and Functions of P ar ts No. Name Function 1 Operator panel Used for operating the scanner . 2 Power button Used to po wer the scanner on/off. 3 Hopper Document input tray . 4 Side guides Used for adjus ting the document width. 5 Hopper extension Used for long documents. 6 ADF (Automatic docu- ment feeder) Feeds documents automatically [...]

5 1.2 Names and Functions of P ar ts 1 SCANNER BASICS ■ Assemblies Lamp Lamp Lamp socket cover Guide plate Brake roller unit Pick roller unit Lamp unit Removable glass sheetguide Lamp socket cover PAD Assy[...]

6 1.3 Operator P anel 1.3 Operator P anel The operator panel is located at the Upper right hand side of the sca nner . The panel consists of an LCD display (16 char acters x 2 line), LEDs, and buttons. ■ Arrangement P ower b utton[...]

7 1.3 Operator P anel 1 SCANNER BASICS ■ Function of Buttons Button Name Function T urns on/off when the main line switch is set to “I”. Send to/S tart S tarts scanning in test mode. St o p Clears the error if this button is pushed while the Check lamp is on or is blinking. Enter Used for setup, or test mode. Exit Used for setup, or test mode[...]

8 1.3 Operator P anel ■ Function of LEDs ■ Function of LCD panel LED Function Power (Green) Lights when the power supply is switched on. Read (Green) Light during scanning. Check (Y ellow)  Lights when a hardware alarm is detected. Lights out when button is pus hed. (except initial errors)  Blinks when an equipment error occurs. Papaer ja[...]

9 1.3 Operator P anel 1 SCANNER BASICS ■ Counter displa y Batch counter and Abrasion counters are shown bellow: Batch counter L Abrasion counter K Fig.1 Simultaneously press the both (Left) and (Rig ht) button for at least one second, to switch to the Life counter panel display as shown bellow: Batch counter L Lif e counter K Fig.2 T o return fro[...]

10 1.3 Operator P anel Counter Functions Batch counter (Left) button is pressed for at least one sec- ond. The number of scanned documents from the start of reading until "P aper empty" or an error is detected. The counter is automatically reset at the start of reading . This counter can be used for checking the number of scanned document[...]

11 2 INST ALLA TION AND CONNECTIONS This chapter describes how to in st all and connect the scanner to a PC, and how to inst all the Fujit su application so f t ware. Ref erences to operating systems (OS) are indicated as follo ws : 2.1 Inst alling the Scanne r ......................................................... 12 2.2 Connecting the Scanne r[...]

12 2.1 Installing the Scanner 2.1 Installing the Scanner The following show s the procedure for installing the scanner . ■ Cautions on placement of scanner 1. Move the scanner to the installing area. Refer to the "Operator ’s Guide" st ored on the “User Ma nual (CD-ROM)” about the dimensions of the scanner , and the space require [...]

13 2.2 Connecting the Scanner 2 INST ALLA TION AND CONNECTIONS 2.2 Connecting the Scanner ■ Connecting the po wer cable Connect the power cable to t he power inlet of the device and to a outlet rated to comply with scanner power requirements. ■ Connecting the interface cable An interface cable and a SCSI card are required. Use the following SCS[...]

14 2.2 Connecting the Scanner (1) Use the driver atta ched to the SCSI card. Y ou can download the driv er file for each OS fr om the following address:  For ASC29160 http://www .adaptec.com/worldwide/sup port/drivers_by_product.html?sess=no &cat=/Product/ASC-29160  For ASC39160 http://www .adaptec.com/worldwide/sup port/drivers_by_produc[...]

15 2.2 Connecting the Scanner 2 INST ALLA TION AND CONNECTIONS (4) For other OS, refer to the following ADAPTEC addr ess to get the necessary update files and re vises the driver .  For ASC29160 http://www .adaptec.com/worldwide/sup port/drivers_by_product.html?sess=no &cat=/Product/ASC-29160  For ASC39160 http://www .adaptec.com/worldwid[...]

16 2.2 Connecting the Scanner 1. Connect and use the thumbscrews to fix the interface cable into the interface connector of the scanner . 2. Connect and fix the other end of the inte rface cable to the PC. HINT The factory default setting for SCSI ID is “No.5”. If the SCSI ID of a nother SCSI device is set to the same ID, either change the scan[...]

17 2.2 Connecting the Scanner 2 INST ALLA TION AND CONNECTIONS 3. T urn o n the scanner Press the side of “ | ” on the Main line switch. Then press the Power butt on on the Operator panel. When the power is supplie d, the green LED on the Operator panel lights. Main line switch (Back side) P ower on ! P ower Button[...]

18 2.2 Connecting the Scanner 4. Press the power sw itch on your PC.[...]

19 2.3 Installing the Scanner Driver and Application 2 INST ALLA TION AND CONNECTIONS 2.3 Installing the Scanner Driver and Application T o enable scanning of docum ents on the scanner , the Scanner driver (FUJITSU TW AIN32 scanner driver) and Image Capturing Software Ut ilities “ScandAll 21” (ScandAll 21) or ot her scanning package must be ins[...]

20 2.3 Installing the Scanner Driver and Application ■ Installing FUJITSU TW AIN32 Scanner Driver When y ou use Windows ® 98, Windows ® Me, Windo ws ® 2000, and Windows ® XP (Please use FUJITSU TW AIN32 V ersion 9.9. ) (1) Prep aration Confirm that the Sc anner is connected to your personal comput er with a SCSI interface cable. ATTENTION Ins[...]

21 2.3 Installing the Scanner Driver and Application 2 INST ALLA TION AND CONNECTIONS (2) Inst alling the mini-driver 1. T urn on the power by pus hing the power switch on th e scanner's control panel. The green LED on the contro l panel lights, and then “R eady“ is displayed on the LCD. 2. T urn on your PC and log on to Windows ® . When [...]

22 2.3 Installing the Scanner Driver and Application 4. Insert the Scanner driver (C D-ROM) into the CD-ROM drive HINT If automatic start has been set up, the start up screen for the setup disk is displayed. Click the [Exit] butt on and close this screen.[...]

23 2.3 Installing the Scanner Driver and Application 2 INST ALLA TION AND CONNECTIONS 5. Select "Find the most suit able driver in the next locati on". Check "Include the next location" then specify D:Driver 2 (If your CD-ROM is the D drive). After that click [Next>]. • For Windows ® 98, just check "S pecify search l[...]

24 2.3 Installing the Scanner Driver and Application 6. For Windows ® XP , the next screen is displayed, cl ick [Continue] and complete the installation. For other oper ating systems click [Next>]. ATTENTION For Windows ® 2000, “Digital Signatur e Not Found“ is dis- played. Click [Y es] and c ontinue the installation. ATTENTION For Windows[...]

25 2.3 Installing the Scanner Driver and Application 2 INST ALLA TION AND CONNECTIONS 7. The following screen is di splayed, Click [Finish]. 8. Rest art the system. After rest arting the system, in stall the TW AIN data source.[...]

26 2.3 Installing the Scanner Driver and Application (3) When y o u use Windo ws®98, Windows ® Me, Windows ® 2000, W indows ® XP , select Driver Inst allation screen for TW AIN32 V9.9. 1. Insert the Scanner Driv er CD-ROM, then use the ex plorer to double click on D:Driver2Setupinst all.exe (If you r CD-ROM is the D drive). 2. Follow the ins[...]

27 2.3 Installing the Scanner Driver and Application 2 INST ALLA TION AND CONNECTIONS 3. When inst allation is finished, confirm that the following folder has been created. The icons displayed differ depending on the setting in [Select Component] during installation. Continue , installation of the Image Captur ing So ftware "ScandAll 21".[...]

28 2.3 Installing the Scanner Driver and Application When y ou use Windows ® 95 or Windo w sNT ® 4.0 (Please use FUJITSU TW AIN32 V ersion 8.9.) (1) Prep aration 1. Confirm that the SCSI adapter is atta ched to y our personal computer . 2. Confirm that the SCSI dr iver and ASPI m anager are correctly integrated and operating. 3. If an older versi[...]

29 2.3 Installing the Scanner Driver and Application 2 INST ALLA TION AND CONNECTIONS . 4. Follow the instruction on the screen to complete the in st allation. Make the best selection that suits your needs. • Select the language you wi ll use during installation. • Check the names of component s that need to be inst all ed in [Select Components[...]

30 2.3 Installing the Scanner Driver and Application 5. When inst allation is finished, confirm that the following folder has been created. The icons displayed differ depending on the setting in [Select Component] during installation. Continuously , install the Image Capt ur ing Softw are "ScandAll 21". HINT When installing the “TW AIN [...]

31 2.3 Installing the Scanner Driver and Application 2 INST ALLA TION AND CONNECTIONS ■ Installing "ScandAll 21" 1. Insert the Scanner driver CD-ROM to the CD-ROM drive and use select installation under ScandAll 21 or ScandAll 21 in the [ScandAll] fol der in the CD-ROM drive. ATTENTION When using Windows NT ® 4.0, Windows ® 2000 or Wi[...]

32 2.3 Installing the Scanner Driver and Application 2. Select the language you us e during installation in [Choose set up Language] then click [OK]. This screen mi ght not be displayed. 3. Click [Next>] in the following screen.[...]

33 2.3 Installing the Scanner Driver and Application 2 INST ALLA TION AND CONNECTIONS 4. Carefully read the Lic ense Agreement then click [Y es], if you agree. 5. Confirm the name of the destinat ion folder then click [Next>].[...]

34 2.3 Installing the Scanner Driver and Application 6. The following screen is di splayed, Click [Finish].[...]

35 2.3 Installing the Scanner Driver and Application 2 INST ALLA TION AND CONNECTIONS ■ Scanning documents Confirm that the scanner works properly , as follows. 1. Place a document on t he hopper . For details on how to load documents , refer to "fi-4860C Operator ’s Guide” incl uded in the “User Manual (CD-ROM)”. 2. S tart ScandAll [...]

36 2.3 Installing the Scanner Driver and Application 3. S pecify the scanner you use. Select [Select Sour ce] from the [Scan] menu in ScandAll 21. The f ollowing dialog is displa yed, - Select " FUJITSU fi-4860C EAdij" when using FUJITS U TW AIN32 V ersion 9.8. - Select " FUJITSU TW AIN32 " when using FUJITSU TW AIN32 V ersion 8[...]

37 2.3 Installing the Scanner Driver and Application 2 INST ALLA TION AND CONNECTIONS 4. Click [Scan to V iew] button in the toolbar . 5. In [TW AIN Driver] (Scan c onditions setting screen) sele ct the scanning resolution, paper size and other scanni ng conditions. Then cli ck the [Scan] button. For details on settings in th e [TW A IN Driver] dia[...]

38 2.3 Installing the Scanner Driver and Application 6. The document is scanned and the image is displayed on the ScandAll 21 screen. If the document can be scanned then setup has been successfully finished. Ref er to "ScandAll 21 Help" for inf o r mation about ScandAll 21 functions and operations . ATTENTION The screen images may be chan[...]

AP-1 APPENDIX-1 MESSA G ES OF OPERATOR P ANEL ■ Massages of Scaner Operation Status <Not Ready status> (Initializing)  changes to  with progress of time, and when all become  , it move to the following check states. < Not Ready status> (Ejecting document) < Not Ready status> (Checking sensor) < Not Ready status> ([...]

AP-2 <Scanning> HINT "xxxx" shows the n u m ber of Batch counter value. <Scanning> HINT "xxxx" shows the number of Ba tch counter value. <At Low power mode> When the messages of LCD on the Operation panel disappears and the Power LED lamp lights, the scanner is in Low power mode. T TENTION The scanner wake up f[...]

AP-3 <Double feed error> (Scanning) The following message is displa yed while the scanner is scan- ning continuously in the state wh ere double feed has detected (by thickness check). If a double feed detection state is canceled on “Ready“ screen after scanning, the upper row of this message disappear . HINT "xxxx" shows the num[...]

AP-4 ■ Err or mesage (T emporar y err or :Check LED blinking ) Check LED blinks when the foll owing errors occur except <Hopper empty> and <Mis- pick>. <Hopper empty> The following messages ar e displayed if no documents are on the hopper during the scanning opperation. Please place docu- ments on the hopper . Scanning is contin[...]

AP-5 <ADF cover open> The following message is displayed if the ADF cover is not closed completely . Close the ADF cover comple tely , to enable scanning. <Double feed error> (by thickness check) The following message is displa yed, when the double feed is detectied by thickness check. (by length check) The following message is displaye[...]

AP-6 <Skew error> The following message is displayed, When skewed document is fed from the ho pper to the ADF . <Hopper is full or Pick unit not set> The following message is displayed, when the Pick roller unit is not set correctly or when t here are too many documents. (When the documents are on the hopper .) <Pick unit not set>[...]

AP-7 <Separation roller > The following message is displayed, when rotating the Separa- tion roller and the Brake roller does not rotate at all. <Checking Consum- ables> The following message is displa yed, when the Abration counter value exceeds the setting val ue to display an consumables replacement message. <Print cartridge not s[...]

AP-8 ■ Alarm message (Har dware err or :Check LED lighting ) The following messages are displayed, when an error occu rs inside the sccaner . In this case, please switch on t he power supply once again afte r disconnecti ng the power supply . If the same message is displa yed again, please contact to a distributor or an nearest imaging service an[...]

AP-9 <Lamp fuse alarm> (Front side) The following message is display ed, when the fuse for the lamp for front side belows out. <Lamp fuse alarm> (Back side) The following message is display ed, when the fuse for the lamp for back side belows out. <Background fuse alarm> (Front side) The following message is displayed, when the fus[...]

AP-10 <Hopper over run> The following message is displayed, when the hopper moves over the normal position. <Sensor control error> The following message is displayed, when an error occurs in the sensor control part. <Sensor dirty error> The following message is displayed, when an error occurs owing to a dirt on the sensor . HINT &[...]

AP-11 <Power supply error> The following message is displayed, when an error occurs in the Power supply . <EEPROM Alarm> The following message is displayed, when an error occurs in EEPROM. HINT The EEPROM address where the er ror occurs is displayed in [xx] digit in the above sample screen. <VDCC Read/Write error> The following me[...]

AP-12 <MDC download error> The following message is displa yed, when an error occurs dur- ing downloading the firmware to MDC. <Imprinter alarm> The follow ing message is displayed, when an error occurs in fi-486PRFR (Imprinter of front-side) or fi-486 PRRE (Imprinter of rear-side). <Command alarm> The following message is di spla[...]

AP-13 APPENDIX-2 CONSUMAB LES AND REPLACEMENT CY C LE The following table list s t he Part No. and the standard replacement cycle of the consumables. It is recommended you stock extra consumables before the ones on the scanner reaches end of life. The consumables must be repl aced periodically . Y ou can check the number of scanned p ages for the P[...]

AP-14 APPENDIX-3 T R OUBLESHOOTING Should any of the foll owing problems arise, refer to the relevant section listed below .  Scanner does not turn on. Refer to Chapter 5.2 T r oubleshooting “Synptom1” on page 120 of the fi-4860C Operator ’s Guide.  The operator panel LCD goes out. Refer to Chapter 5.2 T r oubleshooting “Synptom2” o[...]

AP-15  Scanner is not recognized by PC automatically . Refer to Chapter 5.2 T roubl eshooting “Synptom13” on p age 139 of the fi-4860C Operator ’s Guide.  Windows ® system gets unst able. Refer to Chapter 5.2 T roubleshooting “S ynptom14” on page 141 of the fi-4860C Operator ’s Guide.[...]

AP-16 APPENDIX-4 CLEARING DOCUMENT JAMS If a document jam occurs du ring feeding, follow the proc edure below to remove the jammed documents. ■ Remo ving jams from the hopper or the transpor t path 1. Remove the docum ents on the stacker . 2. Pull up on the lever on t he right front of t he Upper transport and then raise it. CAUTION - Be careful [...]

AP-17 3. While pulling the ADF lever toward you, lift up the ADF upper sheet guide. 4. Remove the jammed document. 5. Lower the ADF upper sheet guide carefully . 6. Lift the Upper transport unit fully to release the safe ty lock and then lower the transport unit carefully . ■ Remo ving jams from the eject mec hanism. 1. Remove the docum ents on t[...]

AP-18 3. Pull out the jammed do cument to the stacker . 4. Lift the Upper transport unit fully to release the safe ty lock and then lower the transport unit carefully . ADF upper sheet guide ADF release le ver[...]

AP-19 ■ Document separation f orce adjustment If the following error occurs frequently , adjust the brake force of the Brake roller using setup mode. - Double-feed - Mis-pick - Paper jam1 1. Enter in to the setup mode. Please refer to the section "1 .3 Basic Operations of the Operator Panel" on page 6 of the fi-4860C Operator ’s Guide[...]

AP-20 Document separation force se tup items are as follows. If Mis-pick occurs frequently , adjust the Pick roller ro tation speed. Press (Next button) to show the following screen. Press (Left arrow button) or (Right arrow button) and select an item. Press (Enter button) to select the setting. Setting Document thickness Document sep- aration forc[...]

AP-21 Pick speed Mis-pick occurs frequently . Fast (Factory default) Decrease pick speed Mid Slow T TENTION When you set pick speed at "M id" or "Slow", scanning speed is reduced.[...]

AP-22[...]

● IN-1 A Abrasion counter ............................. 10 AC cable ............................................ 2 Accessories ....................................... 2 Adobe Acrobat 5.0 ....................... 2 Installation Guide ......................... 2 Power cable .................................. 2 Scanner driver ........................[...]

● IN-2 M Main line switch ................................ 4 Mini driver ....................................... 19 N Names and Functions of Parts ......... 3 O Operator panel .............................. 4 , 6 Operator’s Guide ............................ 12 P PAD Assy ...................................... 4 , 5 Pick roller unit ...........[...]

fi-4860C Image Scanne r Inst allation Guide P3PC-E177-02EN Date of issuance: January , 2003 Issuance responsibility: PFU LIMITED Printed in Japan • Copying of the contents of this manual in whole or in p art and copying of the scanner application is forbidden under the copyright law . • The contents of this manual ar e subject to change without[...]

This Manual uses recycled paper .[...]