Fujitsu PDS4221W-H manuale d’uso

English Befor e using the display , read this manual carefully so that you know how to use the display correctly . Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the safety precautions. Keep this manual where the user can see it easily . * Installation and removal requir e special expertise. C[...]

DECLARA TION OF CONFORMITY according to EN45014 We Fujitsu General (Euro) GmbH of W erftstraße 20, D-40549 Düsseldorf, F . R. Germany Manufacturer: Shinjyo Fujitsu General Limited 702-3 Kanaza wa Shinjyo-shi Y amagata Japan declar es under our sole r esponsibility that the product, T ype: 42” PLASMA DISPLA Y Model Name: PDS4221W -H / PDS4221W -[...]

DECLARA TION OF CONFORMITY according to EN45014 We Fujitsu General (Euro) GmbH of W erftstraße 20, D-40549 Düsseldorf, F . R. Germany Manuf acturer: Shinjyo Fujitsu General Limited 702-3 Kanazawa Shinjyo-shi Y amagata Japan declar es under our sole r esponsibility that the product, T ype: 42” PLASMA DISPLA Y Model Name: PDS4222W -H / PDS4222W -[...]

E-2 SAFETY PREC AUTIONS FCC NOTICE • PDS4221W -H/PDS4221W -S: A Class A dig ital device This equipment has been tested and found to comply with the limits for a Class A dig ital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a [...]

E-3 English Power cord AC 240 V (SAA TYPE) AC 200–240 V AC 100–125 V Power supply voltage: – When the product is used on a cart, care should be taken to avoid quick stops, excessive force, and uneven surfaces which may cause the product and cart to overturn, dama ging equipment or causing possible injury to the operator . – The pr oduct sho[...]

E-4 FEA TURES This display has a plasma display panel and is only 8.5 cm deep. W ith its high ima ge quality and performance, it is perf ectly suited to multimedia applications. Can receive a variety of input signals • In addition to video, S-video, and RGB1 (mD-sub Connector), RGB2 (BNC x 5 connector) signals, this display supports input of high[...]

E-5 English HAND Y TIPS • Images ma y become “burnt” into the screen phosphors if the screen is left on for e xtended per iods. T o ensur e that the display has a prolonged service life, be sure to use a screen sa ver . This will ensure the same image or pattern is not constantly displa yed f or long periods. (See P . E-40–E-41.) • The di[...]

E-6 CLEANING AND MAINTENANCE Pr ecautions Be sure to remov e the power plug from the receptacle before cleaning the display . Be sure not to clean the display using a cloth dampened with v olatile solvents, such as benzene or thinner . Suc h solvents can harm the display’ s cabinet, the filter a t the screen front, and the remote control. They ca[...]

E-7 English INST ALLA TION T o prevent the display’ s inter nal components from overheating, make sur e tha t the display is installed in a well-ventilated loca tion. Be sur e to use the (optionally a vailable) stand, wall-mounting unit or the other unit when installing the displa y . Also, be also sur e that your dealer performs the actual insta[...]

E-8 SAFETY MEASURES T o pre vent accident and ensure saf ety in the e vent of an earthquake, f ix the display securely into position as described belo w . FIXING THE DISPLA Y TO A WALL OR PILLAR FIXING THE DISPLA Y TO THE ST AND Y ou need tw o strong cords. 1 Attach a bracket to each hole at the rear of the display T o do this, use screw A (10 mm l[...]

E-9 English HOW TO USE ACCESSORIES Cable clampers Use the supplied ca ble c lampers to bind the display’ s signal or power cables. Use them as sho wn in the figure when mounting the display on the wall, using the w all-mounting unit, or hanging it from the ceiling using the hanging unit. ACCESSORIES Information Cables for connecting the displa y [...]

E-10 PART NAMES AND FUNCTIONS POWER POWER MODE WIDE MENU VOLUME ENTER Front 1 Power indicator lamp This lamp sho ws w hether the main power is ON or OFF , as follo ws: Lit (red): Standby Lit (green): Power ON Lit (orange): Power saving (DPMS: Power sa ving function) mode ON Flashing (red): Malfunction (Flashes differently depending on the type of m[...]

E-11 English 1 Main power switch Press this switch w hen the power is OFF to turn it ON. When y ou do so, the po wer indica tor lamp will become red, indicating th at you can turn ON or OFF the power to the displa y using either the remote contr ol or the display’ s control panel. Press this switch w hen the power is ON to turn it OFF . 2 Externa[...]

E-12 0 Component video input terminal (COMPONENT VIDEO INPUT) Connect this terminal to the component video output (color difference output) terminal of your HDTV unit or D VD pla yer . A S-video input terminal (S-VIDEO INPUT) Connect this terminal to the S-video output terminal of your VCR or video disk player . B Video input terminal (VIDEO INPUT)[...]

E-13 English Setting signals This display can store parameter settings for eight additional signals for both RGB1 and RGB2. T o do this, select a desired signal and f ollow the instructions in “ Adjusting Scr een Position and Size” on P . E-30–E-31 to adjust the parameters. When y ou finish, the settings will be automa tically stored. Thus, w[...]

E-14 PART NAMES AND FUNCTIONS (C ontinued ) Note The remote control will not function properly if the batteries are dead. Be sure to replace them as needed. Make sure tha t y ou use r eplace the batteries with new ones; also, be sure to use replacement batteries of the same type as the original ones. POWER ON RGB VIDEO WIDE POWER OFF VOL 1 2 3 4 SH[...]

E-15 English PRECAUTIONS T o prevent malfunction, be sure not to a pply any form of severe shock to the remote control. T o prevent malfunction or def ormation, be sure not to allow the remote contr ol to become w et; also, k eep it aw ay fr om hot locations or heating equipment. Be sur e not to c lean the remote contr ol using a c loth dampened in[...]

E-16 Be sure to turn OFF the po wer to the displa y and e xternal equipment before making any connections. No cables ar e supplied with the display for connection to exter nal equipment. The type of cable to be used varies depending on the PC model. Contact your dealer for more information. RECEPT ACLE Mak e sur e that the power ca ble’ s g round[...]

E-17 English Connection to PC POWER INPUT AUDIO2 INPUT VIDEO INPUT S-VIDEO INPUT COMPONENT VIDEO INPUT (color dif ference input) AUDIO1 INPUT RGB1 INPUT RS-232C RGB2 INPUT T o r eceptacle T o sound output terminal T o video output terminal T o S-video output terminal T o color dif ference output terminal T o display (analog RGB) output terminal T o[...]

E-18 Pr ess the main power switch at the bottom of the display . When y ou do so, the main po wer turns ON and the power indica tor lamp turns r ed. Pr ess on the r emote control. When you do so, the po wer indica tor lamp turns green. Pr ess or to select a desir ed input mode. BASIC OPERA TIONS 1 2 3 * Y ou can also use the switches on the display[...]

E-19 English SELECTING INPUT MODE Press to select a desired input mode. Each time you pr ess , a dif ferent input mode appears. The sequence is as follows: Video S-video Comp.video V ideo: Displays images from equipment connected to the V ideo terminal. S-video: Displays images from equipment connected to the S-video terminal. Comp.video: Displays [...]

E-20 WA TCHING IMAGES ON THE WIDE SCREEN Information • Y ou cannot select A uto mode when y ou ar e in Comp.video mode (video input mode). • Y ou may not be able to watch images clearly in Auto mode, de pending on the contents of the image software y ou use. If y ou exper ience problems, use to switc h to a mode that provides the optim um scree[...]

E-21 English Information Y ou ma y find dark ar eas on top and at the bottom of the screen if you select one of the Zoom modes for media while using the Vista Vision or Cinema V ision size i.e ., the sizes used fr equently f or image softw ar e. Normal Displays images of normal size (i.e., a 4:3 aspect ratio). Auto (Video Input Mode) The scr een si[...]

E-22 HOW TO USE MENUS 1 2 3 SELECTING OPTIONS IN A MENU Use the [MODE] button on the displa y or and on the r emote control to select a desired input mode. Press MENU . The main menu scr een will appear . Press or to switch between subordinate menus. Each time you pr ess or , one of the av ailable men us appears. Press ENTER or . The cor responding[...]

E-23 English PICTURE Menu screen (Video Input Mode) PICTURE Menu scr een (RGB Input Mode) USING THE PICUTURE MENU When y ou f inish selecting a desired option in the PICTURE menu screen, press ENTER or . At this time, the adjustment/setup scr een f or tha t option will a ppear . Y ou can use or to change the value f or the option. (See P . E-28–E[...]

E-24 HOW TO USE MENUS (Continued) USING THE POSITION/SIZE MENU When you f inish selecting a desir ed option in the POSITION/SIZE menu screen, press ENTER or . When you do so, the adjustment screen for that option appears. Y ou can use or , , and to change the v alue f or the option. (See P . E-30–E-31.) Changes you mak e will be stor ed only for [...]

E-25 English USING THE SOUND MENU When y ou f inish selecting a desired option in the SOUND menu screen, use or to change the value for that option. (See P . E-32–E- 33.) Changes y ou mak e will be stor ed onl y f or the selected mode . Option (1) T reble (2) Bass (3) Balance (4) Speak er Function Adjusts treble. Adjusts bass. Adjusts v olume bal[...]

E-26 Option (1) OSD (2) Language (3) Monitor No. (4) V ideo mode (for V ideo, S-video) (5) V ertical sync (for Comp.video, RGB1, RGB2) (6) Clamp pulse (for Comp.video, RGB1, RGB2) (7) Bluish white (for V ideo, S-video) (8) Status (9) Extended menu Function Selects whether to display information other than menus. Selects language used for menus. Sel[...]

E-27 English Extended menu scr een (Video Input Mode) Extended menu screen (RGB Input Mode) Option (1) OSD rotate (2) DPMS (3) White screen (4) Screen sa ver (5) Input priority (6) Audio Input (7) 3D Y/C (for V ideo (3.58NTSC)) (8) Studio mode (9) White peak le vel calibration (for RGB1, RGB2) (10) Sharpness (for RGB1, RGB2) (11) Gamma (for RGB1, R[...]

E-28 ADJUSTING IMAGES (PICTURE MENU) Pr ess MENU . The main menu screen will appear . Pr ess or to select “PICTURE”. Each time you press or , one of the a vailable menus appears in the follo wing sequence: PICTURE POSITION/SIZE SOUND OTHERS Pr ess ENTER or . The PICTURE Menu screen will appear . Pr ess or to select “Tint”. Pr ess ENTER or .[...]

E-29 English Note Use to switch over to the normal mode bef or e adjusting the “Dot clock” or “Clock phase”. Information * On-screen informa tion disa ppears if you do not take any action for 60 seconds. * The following abbr evia tions used in this document r epresent input modes in whic h you can make adjustments: V : V ideo mode, S : S-vi[...]

E-30 ADJUSTING SCREEN POSITION AND SIZE (POSITION/SIZE MENU) Pr ess MENU . The main menu screen will appear . Pr ess or to select “POSITION/SIZE”. Each time you press or , one of the a vailable menus appears in the follo wing sequence: PICTURE POSITION/SIZE SOUND OTHERS Pr ess ENTER or . The POSITION/SIZE Menu screen will appear . Pr ess or to [...]

E-31 English * On-screen informa tion disa ppears if you do not take any action for 60 seconds. * The following abbr evia tions used in this document r epresent input modes in whic h you can make adjustments: V : V ideo mode, S : S-video mode, C : Comp.video mode, R1 : RGB1 mode, R2 : RGB2 mode Adjusting Screen Position (Position) Horizontal positi[...]

E-32 ADJUSTING SOUND (SOUND MENU) Pr ess MENU . The main menu screen will appear . Pr ess or to select “SOUND”. Each time you press or , one of the a vailable menus appears in the follo wing sequence: PICTURE POSITION/SIZ E SOUND OTHERS Pr ess ENTER or . The SOUND Menu screen will appear . Pr ess or to select “Balance”. Pr ess or to adjust [...]

E-33 English * On-screen informa tion disa ppears if you do not take any action for 60 seconds. * The following abbr evia tions used in this document r epresent input modes in whic h you can make adjustments: V : V ideo mode, S : S-video mode, C : Comp.video mode, R1 : RGB1 mode, R2 : RGB2 mode Adjusting T r eble (T reble) Any v alue betw een -6 an[...]

E-34 OTHER ADJUSTMENTS (OTHERS MENU) Pr ess MENU . The main menu screen will appear . Pr ess or to select “OTHERS”. Eac h time y ou press or , one of the av ailable men us appears in the f ollo wing sequence: PICTURE POSITION/SIZE SOUND OTHERS Pr ess ENTER or . The O THERS Men u screen will appear . Pr ess or to select “Language”. Pr ess EN[...]

E-35 English Setting Display Information (OSD) All modes Y ou can use this option to select whether to display information other than menus. (Error messa ges ar e displa yed r egardless of what choice you make for this option.) Each time you pr ess or , one of the available c hoices appears in the follo wing sequence: On Off On: Displays all inform[...]

E-36 OTHER ADJUSTMENTS (O THERS MENU) (Continued ) Eliminating Flicker (V ertical sync) C R1 R2 Corrects the v ertical sync hronization signal timing to eliminate vertical f licker . Use or to specify a v alue betw een -2 and +1. Adjusting Clamp Pulse (Clamp pulse) C R1 R2 Adjusts clamp pulse in accordance with the input signal recei ved fr om conn[...]

E-37 English EXTENDED FEA TURES (E xtended menu) Use or on the OTHERS Menu screen to select “Extended menu”. Press ENTER or . The messa ge scr een will appear . Press or to select “Enter” and press ENTER . The “Extended men u” scr een will appear . Press or to select “DPMS”. • When “ ” appears to the right of an option, you ca[...]

E-38 ADJUSTMENTS RELA TED TO YOUR PC When images are brighter (darker) with a new PC • Adjusting brightness (White peak level calibration) R1 R2 Select the optimum dynamic range for images. T o do this, you need to crea te a totall y w hite scr een [input 255 to each of R, G, and B] using the PC’ s paint program. Then, display tha t scr een and[...]

E-39 English • Fr equency scanning (Fr eq. scan) R1 R2 Y ou can use this option to perform automa tic fr equency scanning to ensure optimum image quality . Each time y ou press or , one of the av ailable choices appears in the follo wing sequence: Auto Fix Auto: Performs automatic frequency scanning at all times f or optimum image quality . Fix: [...]

E-40 When using the display continuously When switching between RGB and video input modes only occasionally 1 Select “T ime” f or “Function” with “Screen sa ver”. 2 Select a desired range for “Mo ving ar ea” with “Scr een sa ver”. This causes the screen sa ver pa ttern to mov e in the same r ange at regular inter vals. When swit[...]

E-41 English When rotating text (for installing the display with one of its sides facing down) • Rotating text (OSD rotate) All modes Y ou can use this option to r otate the text. Each time y ou press or , one of the av ailable choices appears in the follo wing sequence: -90 Deg. Normal +90 Deg. -90 Deg.: Displays text from left to right when the[...]

E-42 Model PDS4221W -H/PDS4221W-S/PDS4222W -H/PDS4222W -S Screen size 42" wide screen (92.0 cm (W) x 51.8 cm (H) x 105.6 cm (Diagonal)) Aspect ratio 16:9 (wide) W eight 31.5 kg Outer dimensions 103.5 (W) x 64.0 (H) x 8.5 (D) cm Po wer suppl y 100 –240 V AC 50/60 Hz Po wer consumption 4.3 A Screen dimensions 92.2 (W) x 52.2 (H) cm Number of p[...]

E-43 English Regulation ··· PDS4221W -H/PDS4221W -S • UL, CSA ····· Safety: UL1950/CSA C22.2 No.950 EMC: FCC Part 15 Class A, ICES-003 Class A • CE ··············· Safety: EN60950 1992, A1: 1993, A2: 1993, A3: 1995, A4: 1997 EMC: EN55022 1994, A1: 1995, A2: 1997, Class A EN61000-3-2 1995, A1: 1997, A2: 1998 EN61000-3-3 19[...]

E-44 OPTIONS W all-mounting unit V ertical: 0 ° to 5 ° mounting angle P-42WB11 (for both vertical and horizontal) Horizontal: 0 ° to 15 ° mounting angle Hanging unit 0 ° to 15 ° mounting angle (v ariable) P-42CT11 Stand P-42TT11 Speaker P-42SP11 (1 set of 2 speak ers) Speaker stand P-42ST11 (1 set of 2 speak ers stands) * When installing an o[...]