Fujitsu Q550 manuale d’uso

System Operating manual STYLISTIC Q550[...]

Congratulations, you have decided to buy an innovative Fujitsu product. The latest information about our products, useful tips, updates etc. is available from our website: " http://ts. fujitsu.c om" For automatic driver update s, go to: "http://su pport.ts .fujitsu. com/co m/supp ort/ind ex.html " Should you have any technical q[...]

[...]

Copyright Fujitsu T ec hnol ogy Solutio ns 08/11 Published by Fujitsu T echnolo gy Solutions Mies-van - der-Rohe-Straße 8 (Mi es-van-der-Rohe St reet No. 8) 80807 Munich, G ermany Contact h ttp://t s.fujitsu.com /support All rights reserved, including intellectua l property rights. S u bject to techn ical alterations. Delivery subject to ava ilabi[...]

STYLISTIC Q550 Operating manual Innovative t echnology 7 Ports and controls 9 Important notes 1 1 First-ti me setup of your device 17 W o r k i n gw i t ht h eT a b l e tP C 2 0 Security functions 54 Connecting external dev ices 61 Settings in BIOS Setup Utility 65 T roubleshooting and tips 68 T echnical d ata 76 Manufacturer’ s notes 78 Index 85[...]

Microsoft, MS and Windows are registered tr ademarks of the Microsoft Corpora tion. Adobe Reader is a trademark of Adobe Systems Incorporated. MultiMediaCard is a registered trademark of In fi neon T echnologies AG Sony and Memory Stick are registered tr ademarks of Sony Electronics, Inc. All other trademarks referenced are trade marks or register[...]

Content s Contents I n n o v a t i v e t e c h n o l o g y ............................. ................... ............... .. 7 F u r t h e r i n f o r m a t i o n .............................. ................... ............... ...... 7 Notational conventions ................... ............... ................... ............. 8 P o r t s a n[...]

Contents M e m o r y c a r d s .................. ................... ............... .................. .... 4 5 S u p p o r t e d f o r m a t ................... ................... ............... ............... 4 5 I n s e r t i n g t h e m e m o r y c a r d ...................... .................. ............... .... 4 5 R e m o v i n g t h[...]

Content s T h e e x t e r n a l m o n i t o r i s b l a n k o r t h e i m a g e i s u n s t a b l e ........................... .......... 7 0 The cursor does not correctly follow the pen movemen ts . . . . . . ............... .............. 7 1 P e n i n p u t n o t w o r k i n g ........................... ................... ............... ....[...]

Contents 6 F ujitsu T echnology Solutions[...]

Innovative techn ology Innovative technology ... and ergonomic design make your device a reliable and convenient companion. The device boots very quickly , is ready for immediate use an d offers a particularly long operating time because of its high capacity battery . The user-friendly "BIOS Setup Utility" offers powerful password protect[...]

Innovative technolo gy Notational conventions Pay particular attention to text marked with this symbol. Failure to observe these warnings could pose a risk to health, damage the device or lead to loss of data. The warra nty will be invalidated if the device becomes defective through failure to observe these warnings. Indicates important informa tio[...]

Ports and controls Ports and controls This chapter presents the individual hardw are components of your device. I t gives you an overview of the device’s indicators and connecti ons. Please familiarise yourself with these components before you start to work with the device. Front 1 2 3 4 5 6 7 8 9 10 1 = WebCam 2 = Eyelet for pen cord 3 = ON/OFF [...]

Ports and controls Rear 1 3 4 5 6 7 2 8 8 1 = Battery compartm ent 2 = WebCam 3 = Memory card slot 4 = Fingerprint sensor 5 = USB port 6 = Headphone port 7 = HDMI port 8 = Microphones 10 Fujitsu T echnology S olutions[...]

Important notes Important notes Impor tantnot es Notes This chapter contains essential safety information which must be followed when working with your T ablet PC. Th e other notes provide useful information o n your T ablet PC. Safety notes Safetynotes Notes Please follow the safety notes provided in the "Safety/Regulations" manual as we[...]

Important n otes Protecting the display screen The device is not waterproof. Do not pour liquids on the system or wash it with a heavily soaked cloth. Do not place items on the top of the display , or damage may occur . During normal use of the device , small par ticles from the environment can become embedded in the pen tip a nd scratch the screen[...]

Important notes ► Align the screen protector on the edges of the screen as illustrated and lay it on the screen with the adhesive side downward. ► Make stroking m ovements towards the outside edges in order to remove any air bubbles. ► Press the edges fi rmly . Fujitsu T echnology Solutions 13[...]

Important n otes T o ensure a good seal between the scre en protector and the display , do not lift the screen protector from the display once it has been applied. ► Carefully lift the plastic protective coating at the angled corner and pull it from the screen.  Y ou can now touch the screen with the pen. ► T o remove all adhesive residue an[...]

Important notes Energy saving Notes Energy Energ ysaving If you will not be using your T ablet PC, s witch it off. Switch off any connected external devices when they are not in use. If you use the energy saving functions, the T ablet PC uses less power . Y ou w ill then be able to work for longer before having to recharge the battery . Energy ef ?[...]

Important n otes T ransporting the T ablet PC Protect the T ablet PC from severe shocks a nd extreme temperatures (e.g., direct sunlight in a car). ► If your device has an optical drive, remove all data media (e.g. CD, DVD) from the drives. Transportation Ta b l e t P C ► Switch off the T a blet PC. ► Unplug the mains adapter and all external[...]

First-time setup of your device First-time setup of your devic e First- timese tup Gettingstarted Please read the chapter "Import ant notes ", Page 1 1 . If your device is equipped with a Windows operating system, the necessary hardware drivers and supplied software are already pre-installed. B e f o r ey o us w i t c ho nt h ed e v i c e[...]

First-time setup of your device Selecting a location Selectingalocation Device Mainsad apter Select a suitable location for the device before setting it up. Follow the instructions below when doing so: • Never place the device or the mains adapter on a heat-sensitive surface. The surface could be damaged as a result. • Never place the device on[...]

First-time setup of your device Switching on the device for the fi rst time Switchingonforthe fi rstt ime On devices with ON/OFF switch for wireless components: Slide the O N/OFF sw itch for wireless components to the ON position before switching on the device. When you switch on the device for the fi rst time, the supplied software is installed[...]

Working with the T ablet PC W orking with the T ablet PC Tabl etPC,ope ratio n Tabl etPC This chapter describes the basics for operating your T ablet PC. Y ou can fi n d instru ctions on how to connect externa l devices (e.g. mouse, p rinter) to the T ablet PC in the chapter " Connec ting ex ternal d evices" , Page 61 . Please refer to t[...]

Working with the T ablet PC Switching on the T ablet PC TabletPC:switchingon Power-onindicator Suspend/Resumebu tton 1 2 ► Slide the ON/OFF switch (1) to the right to switch on the T ablet PC.  The ON/OFF switch retu rns automatically to its original position. The power-on indicator (2) lights up whenever the s ystem is switched on. Programmin[...]

Working with the T ablet PC Handwriting recogniti on under Windows 7 Handwriting recognition under Windows 7 currently supports the following languages: English, German, French, Italian, Japanese, Korean, Chinese (traditional and simpli fi ed) , Dutch , Portuguese, Spanish, Brazilian, Norwegian (Bokmål and Nynorsk), Swedish, Finni sh, Danish, Pol[...]

Working with the T ablet PC Select display orientation (portrait or landscape orientation) Landscapeorientat ion Portraitorientation Displayorientation Y ou can choose to use either portrait or landscape orientation for the display . Press the T ablet button to switch between portrait and landscape orientation. Windows 7 Y ou can change these setti[...]

Working with the T ablet PC Actions with one fi nger Action Description Selecting objects (click with the left mouse button) ► With your fi nger , tap once brie fl yo nt h e object. Starting programs (double-click with the left mouse button) ► With your fi nger , tap twice brie fl y in quick succssion on the program icon. Moving objects/wi[...]

Working with the T ablet PC Actions with two fi ngers Action Description Scro lling ► Position two fi ngers on the touch screen. ► Move yo ur fi ngers upwards to scroll up. or ► Move your fi ngers downwards to scroll down. Rotating ► Position the thumb on the touchscreen, then turn the picture clockw ise or counter-clockwise using your [...]

Working with the T ablet PC Action Description Increasing or decreasing the view ► Position two fi ngers on the touchscreen and move them apart to increase the view. or ► Position two fi ngers on the touchscreen and move them together to de crease the view . Blocking context-sensitive menus ► With two fi ngers, tap twice brie fl y in quic[...]

Working with the T ablet PC Actions with three fi ngers Action Description Maximising or minimising current window ► Position three fi ngers on t he touchscreen and move them upwards to maximise the window . or ► Position three fi ngers on t he touchscreen and move them downw ards to minimise the window . Fujitsu T echnology Solutions 27[...]

Working with the T ablet PC Action Description Displaying and rotating current window in 3D carousel layout ► T ap the touchscreen with you r three fi ngers to display the 3D carousel. ► Hold your fi ngertips pressed to change the 3D carousel layout. Minimising all wi ndows and displaying the desktop ► With three fi ngers, tap the touchscr[...]

Working with the T ablet PC Action Description Scrolling through all open fi les in a program ► Position three fi ngers on t he touchscreen and move th em to t he side (left or right) over the touchscreen . Displaying con text menu and selecting entry ► Position two fi ngers on the touch screen. A context menu is displayed on the screen. ►[...]

Working with the T ablet PC Actions with four fi ngers Action Description Displaying a menu with context-sensitive web applications with one hand Y ou can select a word, sente nce, paragraph or an item ► Ta p b r i e fl y on t he touchscreen with four fi ngers on one hand then lift your fi ngers from the screen. A menu with context-sensitive [...]

Working with the T ablet PC Action Description Enlarging the area ► T o magnify an area of a document, position two fi ngers of each hand in a rectangle on the touch screen as sho wn. The selected area will be magni fi ed. ► Place one fi nger on the touchscreen to move the rectangle around the touchscreen to magnify several areas. Fujitsu T [...]

Working with the T ablet PC Action Description Paging through (fast scrolling) ► Position four fi ngers on the touchscreen and move them upwards to scroll up. or ► Position four fi ngers on the touchscreen and move them downwards t o scroll down. The distance you sweep your fi ngers indicates how far you move up or down. 32 Fujitsu T echnolo[...]

Working with the T ablet PC Using the stylus pen 1 2 3 1 = pen tip 2 = pen button 3 = eyelet for p en cord Y ou can use the pen on your T ablet PC as an electronic writing implement to select items, and to navigate through programs on it. Program s that support handwriting recognition also allow you to write characters directly on the screen with t[...]

Working with the T ablet PC The screen responds to entries made with the tip of the fi nger or the pen when the tip of the fi nger or the pen is in direct contact with the screen. Y ou can use the pen to run all functions for which you would otherwise use a mouse. The pen does not support erasing functions. Handling Mouse Pen Selecting menu items[...]

Working with the T ablet PC Changing the pen tip With use, the pen tip may become worn or may pick up foreign particles that can scratch the screen. A damaged or worn tip may not move f reely , causing unpredictable results when using the pen. If these problems appear with your pen, you shou ld change the pen tip. ► Pull the pen tip from the pen.[...]

Working with the T ablet PC Installing a pen battery 1 2 ► Insert the new battery in the pen (1). ► C l o s et h ep e nc a p( 2 ) . Installing a pen cord Y ou should attach t he pen with a pen cord to prevent accidentally dropping or losing it. ► Fasten the pen cor d to the pen eyelet and to the eyelet on the T ablet PC. 36 Fujitsu T echnolog[...]

Working with the T ablet PC T ablet buttons Y our T ablet PC is fi tted with three multi-functional tablet keys. Y ou can navigate on the screen with a simple press of a button, call preset applications or ones that you have s et yourself. Basic functions b efore the device ha s booted Yo u c a n c o n fi gure the functions in the table below you[...]

Working with the T ablet PC T o open the Wi ndows Advanced Boot Options menu, fi rst connect an external keyboard to your device. During the boo t process, press the F8 key quick ly in succession. Alternatively , you can start the Fujitsu Recovery Program while the operating system is running. For more information, please refer to the "Recove[...]

Working with the T ablet PC Webcam Webcam Y our device has two WebCams: one on the front side of the device and one on the rear . Depending on the software u sed, you can use your W ebcam to take pictures, record video clips or take p art in web chats. • The picture quality depen ds on the lighting conditions and the software being used. • Y ou[...]

Working with the T ablet PC Charging, caring for and maintaining the battery Battery Battery The T ablet PC battery can only be charged whe n the ambient temperature is between 5°C and ma x. 35°C. Y ou can charge the battery by connecting the T ablet PC to the mains adapter (see " Mains adapter connecting", Page 18 ). If the battery is [...]

Working with the T ablet PC Removing the b atter y Please observe the safety information in cha pter "Impor tant note s", Page 1 1 . Remove the power plug from the mains outlet! ► Switch the device off. The device must not be in energy-saving mode. ► Remove all the cables from the device. ► T urn the device over and place it on a st[...]

Working with the T ablet PC Installing ba ttery 3 2 1 ► Slide the release button in the direction of the arrow (1). ► Slide the release button in the direction of the arrow (2) and hold it in place. ► Push the battery into the battery compa rtment until you feel it engage (3). 42 Fujitsu T echnology S olutions[...]

Working with the T ablet PC Battery capacity display Y ou can check the charge status directly on the battery itself. ► Remove the battery (see " Re moving a nd inst alling the batter y", Page 4 0 ). PUSH 1 a ► Press the test key (1).  The LED (a) lights up in one of the following colours: LED indicat or State of charge Green The b[...]

Working with the T ablet PC Using the power-management features Power Power Battery The T ablet PC uses less pow er when the power management featu res are enabled. Y ou will then be able to work longer when using the battery before having to recharge it. Power ef fi ciency is increased and environmental pollution reduced. By choosing the best pow[...]

Working with the T ablet PC Memory cards Slot Y our T ablet PC is equipped with an integrated memory card reader . Observe the manufacturer ’s instructions when handling the memory cards. Memorycard Supported format The memory card read er supports the following format: • Secure Digital (SD TM card) Inserting the memory card ► Carefully slide[...]

Working with the T ablet PC Removing the memory card Memorycard In order to protect your data, always follow the correct procedure for removing the card outlined below . Y ou can stop the memory c ard via the corresponding icon in the task ba r: ► T ap on the symbol. ► Select the card you want to stop and remove. ► Ta p OK .  Wait for the [...]

Working with the T ablet PC Inserting the SIM card ► Remove the battery , see Chapter "Re moving t he battery" , Page 41 . 1 ► Slide the SIM card into the slot (1) until it engages, as shown in the battery compartment. The notch shows to the left, the chip to the bottom. ► Install the battery again, see Chapter " Insta lling ba[...]

Working with the T ablet PC Switching the wireless components on and off Before switching on your device for the fi rst time, the on/off switch for radio components must be in the "ON" position. ► Slide the ON/OFF switch into the "O N" position to activate the radio components. Wirele ssLAN WirelessLAN Bluetooth Bluetooth or [...]

Working with the T ablet PC Setting up WLAN access • Requirement: A WLAN must be available and you must have the corresponding access information. Information on co n fi guring the W LAN access can be found in the documentation for your operating system. Access via UMTS If you ordered an integrated UMTS module with your system, you can enjoy opt[...]

Working with the T ablet PC Y our Cradle (optional) Y our Cradle is a device that helps you to quickly connect your T ablet PC to you r peripheral devices, such as a printer , mouse, etc. Y ou only need to dock the T ablet PC in order to work with your peripheral devices. Cradle components Cradle Ports 1 2 2 3 2 2 4 1 = Connect or on the Cradle for[...]

Working with the T ablet PC S e t t i n gu pt h eC r a d l e Select a suitable location for the Cradle before setting it up. Follow the instructions below when doing so: • P l a c e t h eC r a d l eo na fl at, stable, nonslippery surface. • Never place the Cradle and the mains adapter on a heat-sensitive surface. • Do not expose the Cradle t[...]

Working with the T ablet PC ► Remove the power plug of the mains adapte r from the mains socket. ► Pull the mains adapter cable out of the D C jack (DC IN) of the T ablet PC. 1 2 4 3 ► Position the T ablet PC so that it is in line with the storage space of the Cradle. ► Push the T ablet PC on to the Cradle in the direction of the arrow (1) [...]

Working with the T ablet PC Disconnecting the T ablet PC from the Cradle If you connect the T ablet PC to the Cradle during operation, problems can occur . We recommend that the T ablet PC is switched off or that the appropriate undocking function provided by the operating system is executed. ► Switch off the T ablet PC. ► Open the clip on the [...]

Security functio ns Security functions Securityfunctions Y our T ablet PC has se veral security features that you can use to secure your system from unaut horised access. This chapter explains how to use each function, and what the b ene fi ts are. Please remember that in some cases, for example, forgetting your password, you may be locked out and[...]

Security functio ns Con fi guring password protection in BIOS Setup Utility T o navigate m ore easily in the BIOS Setu p Utility , you can use an external USB keyboard. Before using the various options for password protection in the BIOS S etup utility to increase data security , please observe the following: Make a note of the passwords and keep [...]

Security functio ns Setting superviso r and user password ► Start the BIOS Setup Utility and go to the Security menu. ► Select the Set Supervisor Passwor d fi eld and press the Enter key .  With Enter new Passwor d : y ou are asked to enter a p assword. ► Enter the password and press the Enter key .  Con fi rm new Password requires yo[...]

Security functio ns Password protection for booting of the operating system With the supervisor password you have set in the BIOS Setup Utility (see section " Se tting supe rvisor a nd user pa ssword ", Page 5 6 ), yo u can also prevent booting of the operating system. Operating system Activati ng system protecti on ► Start the BIOS Set[...]

Security functio ns Password protection for the hard disk Passwordprotect ion: The had disk password prevents unaut horised access to the hard disk drives and is checked internally each time the system is booted. The condition for this is that you have assigned at least the supervisor password. Activating har d disk protection ► Call u p the BIOS[...]

Security functio ns SmartCard reader Securityfunctions, Securityfunctions SmartCards are not supplied as standard equipment. Y ou can use all SmartCa rds that comply with the ISO standard 781 6-1, -2 or -3. These S martCard s are available from various manufacturers. With the appropriate software you can use yo ur Smar tCard as an alternative to pa[...]

Security functio ns T rusted Platform Module (TPM) (device-dependent) TPM Trusted Platfor mM odule T o use the TPM, you must activate the TPM in the BIOS Setup before the softwar e is installed. The condition for this is that you have assigned at least the supervisor password (see " Securi ty functi ons", Pag e 54 ). Enabling TPM • Requ[...]

Connecting extern al devices Connecting external devices Under all circumstances, please obse rve the safety notes provided in the " Importa nt notes" , Page 1 1 chapter before connecting or disconnecting any devices to or from your T ablet PC. Always read the documentation supplied with the device you wish to connect. Never connect or di[...]

Connecting extern al devices HDMI port HDMIport The HDMI port of your T ablet PC can be used to c onnect an external ampli fi er , LCD TV or a plasma TV with an HDMI connection. ► Connect the data cable to the external device. ► Connect the data cable to the HDMI port of the T ablet PC. Some LCD televisions have only two loudspeaker connection[...]

Connecting extern al devices Connecting USB devices USBports On the USB ports, you can connect external devices that also have a USB port (e.g. a DVD drive, a printer , a scanner or a modem). USB devices are hot-pluggable. This means you can connect and disconnect devices while your operating system is running. USB 2.0 has a data transfer rate of u[...]

Connecting extern al devices Headphone port Connectingaudio dev ices Audioports Connecti ngheadpho nes Via the headphone port, you can connect either a headphone or an e xternal speaker to your T ablet PC. ► Connect the audio cable to the external device. ► Connect the audio cable to the headphone port of the T ablet PC.  The internal loudsp[...]

Settings in BIOS S etup Utility Settings in BIOS Setup Utility BIOSSetupUtility Systemsettings,BIOSSetup Utility Con fi guration,BIOSS etupUtility Setup Systemc on fi guratio n Hardwarecon fi gu ration T o navigate m ore easily in the BIOS Setu p Utility , you can use an external USB keyboard. The BIOS Setup Utility allows you to set the system [...]

Settings in BIO S Setup Utility Operating BIOS Setup Utility BIOSSetupUtility Use the touchscreen to operate the function keys in the BIOS Setup Utility . T ap on any element in the BIOS Setup menus or tap on the function or cursor keys indicated on the bottom of the screen. Press the F1 key to display help on the operation of the BIOS Setup Utilit[...]

Settings in BIOS S etup Utility Exiting BIOS Setup Utility BIOSSetupUtility Y ou need to select the desired option in the Exit menu and activate it by pressing the E nter key: Exit Saving Changes - save ch anges and exit BIOS Setup Utility ► T o save the current menu settings and exit the BIOS Setup Utility ,s e l e c t Exit Saving Changes and Ye[...]

T roubleshooting an d tips T roubleshooting and tips Troubleshooting Tips Fault Troubleshooting Follow the safety notes in th e "Safety/Regulations" manual when connecting or disconnecting cables. If a fault occurs, try to correct it as described. If you fail to correct the problem, proceed as follows: ► Make a note of the steps and the[...]

T roubleshooting and tips The T ablet PC’ s date or time is incorrect Summertime Time,daylights avings Timenotcorrec t Timenotc orrect Inco rre ct da te /tim e Dateisincorrect Bufferbattery,load Cause T roubleshooting T ime and date are incorrect. ► With the BIOS-Setup-Utility , you can set the date and time in the main menu. Date and time are [...]

T roubleshooting an d tips The external monitor remains bl ank Monitor Cause T roubleshooting Monitor is switched off. ► Switch the external monitor on. Power saving has been activated (monitor is blank). ► Press a key (external keyboard) or tap on the touchscreen. Brightness is set to dark. ► Adjust the brightness of the monitor . Screen out[...]

T roubleshooting and tips The cursor does not correctly foll ow the pen movements Cause Fa ult elim ination Pen incorrectly calibrated ► Calibrate the pen as shown un der H a rd w are and Sound / T ablet PC Settings in the Control Panel, see " Settin g the pen", Pag e 34 and " Calibrat ing the pen", P age 34 . Pen input not wo[...]

T roubleshooting an d tips The T ablet PC stops working TheTabletPC Energysaving m ode Cause T roubleshooting The T ablet PC is in energy saving mode. ► Leave energy saving mode. An application programme has caused the malfunction. ► Close the application progr am or restart the T ablet PC (b y restarting the operating system or switching the d[...]

T roubleshooting and tips The battery discharges too quic kly Battery: Cause T roublesho oting The battery is either too hot or to o cold. In this case the battery indicator fl as hes. ► Bring the T ablet PC up/down to a normal temperature again. ► If the operating time of the battery life is extremely short, the battery is probably too old. R[...]

T roubleshooting an d tips User and/or supervis or SmartCard lost Cause T roubl eshooti ng User and/or supervisor SmartCard lost ► If you have lost your User SmartCard, you can continue working with the Supervisor SmartCard and initialise a new User SmartCard or deactivate the SystemLock function. ► If you have lost the Supervisor SmartCard, yo[...]

T roubleshooting and tips Error message/cause Resolution CMOS battery bad If the error message occurs repeatedly , the buffer battery in the T ablet PC is fl at. ► Contact your sales outlet or our customer service centre. System CMOS checksum bad - default con fi guration used The system con fi guration information is incorrect. ► Switch off[...]

T echnical d ata T echnical data Ta b l e t P C General Processor Intel Atom Z670 Main memory (SO DIMM) 2 G Byte DDR2 onboard Electrical data Safety regulations complied with CE Protection class II Maximum power consumption: (T ablet PC on with battery charging) 40 W T ouchs creen Size 25.65 cm 16:10 TFT W XGA Resolution 1280 x 800 pixels/16 millio[...]

T echnical da ta Ambient c onditi ons Environment class DIN IEC 721 7K1 Mechanis m class D IN IEC 721 7M2 Operating temperature 5 ℃ .... 35 ℃ Transport temperature (2K2) –15 °C .... 60 °C Rechargeable battery Yo u c a n fi nd information on the batteries used in your device at " http://ts. fujitsu .com/su pport" . 4-cell lithium [...]

Manufacturer ’s notes Manufacturer ’ s notes Disposal and recycling Notes Information about this subject can be found on your T ablet PC or on our Internet pages. Declarations of Conformity Declarationof conformity The "Declarations of Co nformity" for the device can be found at our Internet address under: " h ttp:/ /ts .fujitsu.[...]

Manufacturer ’s notes CE marking CEmarking CE marking for devices with radio componen t This equipment complies with the requirements of Directive 1999/5/EC of the European Parliament and Commission from 9 March, 1999 governing Radio and T elecommunications Equipment an d mutual recognition of conformity . This equipment can be used in the follow[...]

Manufacturer ’s notes • Connect the equipment into an outlet that is on a different circuit than the receiver . • Consult the dealer or an experienced radio/TV technician for help. Notice to Users of the U S T elepho ne Network Y our T ablet PC may be s upplied with an internal modem which complies with Part 68 of the FCC rules. On this T abl[...]

Manufacturer ’s notes • Public transportation terminals where telephones are used to call taxis or to reserve lodging or rental cars. • In hotel and motel room s as at least ten percent of the rooms must contain hearing aid-compatible telephones or jacks for plug-in hearing aid compatible telephones which will be provided to hearing impaired [...]

Manufacturer ’s notes Avant de connecter cet équipement à une ligne téléphonique, l’utilisateur doit véri fi er s’il est permis de connecter cet équipement aux installations de télécommunications locales. L ’utilisateur est averti que même la conformité aux normes de certi fi cation ne peut dans certains cas empêcher la dégrad[...]

Manufacturer ’s notes FCC Regulatory information fo r T ablet PCs with ra dio device Regulatoryinformation Federal Commu nications Comm ission statement This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,[...]

Manufacturer ’s notes Regulatory Informatio n/Disclaimers Installation and use of this radio device must be in strict accordance with the instructions included in the user documentation provided with the product. Any change s or modi fi cations m ade to this device that are not expressly approved by the manufacturer may void the user ’s author[...]

Index Index A Acoustic error messages 74 Audio ports 64 B Battery battery life 39 caring for and maintaining 40 charge level 40, 44 charging 40 self-discharge 40 storage 40 Battery status meter 40 Battery: discharges too quickly 73 BIOS Setup Utility calling 65 exiting 67 operating 66 protecting with password 55 settings 65 Bluetooth Switching off [...]

Index Memory card handling 45 inserting 45 removing 46 Mobile operation 15 Monitor drifting display 70 remains blank 70 N Notes 1 1 cleaning 16 disposal / recycling 78 energy saving 15 Safety 1 1 touchscreen 22 transport 15 O Operating system activating system protection 57 cancel system protection 57 protecting with password 57 P Packaging 17 Pass[...]

Index T ouchpad cleaning 16 T ouchscreen cleaning 16 dif fi cult to read 69 notes 2 2 re fl ected glare 69 remains blank 69 touchscreen is too d ark 69 TPM 60 Transport Transport damage 1 7 Transportation 15–16 Travel, T ab let PC 15 Troubleshooting 68 T rusted Platform Module 60 U USB ports 63 User password changing 56 entering 56 removing 56 [...]