GE 45608 manuale d’uso

Home Theat er Remote with Z-Wave ® Lighting Contr ol 45608 www .easyzw ave.com Manage your home enter tainment system and lighting with one remote! Controls 12 Audio/Video Devices and up to 232 Z-Wave Devices[...]

2 Table of Contents Audio/Video Key Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Automatic Time-Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

3 Introduction Thank you for purchasing the GE model 45608 R emote Control. This remote allows you to contr ol up to 12 Audio/Video devices as well as your Z-Wave Home Lighting Contr ol network. A Z-Wave home control network can include up to 232 Z-Wav e enabled devices. Y ou can control up to 18 individual Z-Wave lights, 18 groups of lights and 18[...]

4 Audio/Video Key Chart A . SE T – Press & hold to enter setup mode. When in setup mode, press & r elease to back up one level in the setup menu or press & hold to cancel setup. B. ARROWS – Scroll left or right to highlight desired menu item. Highlighted menu item in center of display is active. C. OK – Press & r elease to sel[...]

5 A B C D E F G H I J K L M N O P Q R[...]

6 Batteries Four “ AAA ” Alkaline batteries (not included) are requir ed. Battery Use and Safety • Use only fres h bat ter ies of the required size an d reco mme nd ed t yp e. • Do not mix old and new b at terie s or dif feren t t ypes of ba t teries . • If you do not plan to u se the remote for an ex ten ded p erio d, remove the ba t ter[...]

7 4. W hen in setup mod e: • Press and rele ase t he SET key to back up o ne leve l in the me nu. • Press and hol d the SE T key to exit setup mod e. Initial Setup (Audio/Video Devices) Note: Most devices can be added by entering its code or searching for its code as described in the following two sections. (Be sure the device you wish to add i[...]

8 NO TE: If an invalid code is entered, the LED emits one long blink , and the L CD displays INV ALID. 5. The se lec ted de vice turns of f i f the cod e was success ful . Y ou can also tr y pressing a ddit ion al keys on th e remote to test other functions . 6. If t he code yo u entered func t ions p roper ly for all keys tes ted, Press OK to sa v[...]

9 Changing a Device Code NO TE: All settings of the current device (Key Mover , Learning, and all other user-pr ogrammed features) will be retained. 1. From INITIAL SETUP press OK . T he remote displ ays ADD DEVICE . Use t he ARROW keys to scrol l to CHANGE DEVICE CODE . Pres s OK . 2. The remote disp lays t he device name in t he center of t he 2n[...]

10 4. Use the ARROW keys to view co des of other d evices you h ave set up. 5. Af ter viewin g the cod es, pres s OK or SET to exit . Replacing a Device This replaces an existing device with a new device in your r emote’s programming. One example could be r eplacing your cable box with a satellite receiver . NO TE: The new device replaces and ove[...]

11 Set Clock (Day and Time Setup) 1. From ADVANCED FUNCTIO NS , highlight SET CLOC K and Press OK . 2. T he screen w ill displ ay the da y , hour , minu te and AM/PM with the day hi ghlighted. a. Press the C H + or CH - key to chang e the d ay . b. Use t he r ight ARROW key to highlight the hour , minute and AM/PM and use the CH keys to ad jus t . [...]

12 4. T he remote display s LOC K VO LUM E . Pres s OK . 5. T he remote displ ays USE < > TO SE LEC T VOLUME S OURCE THEN PRE SS O K . 6. Use the ARROW keys to se lec t t he device to b e locke d. Th e remote display s the name of t he device and i t s code (for example, L O CK VOL UME TO RE CEIVER 1158 ). 7 . Press OK . T he dis play chan ge[...]

13 Key Mover Key Mover allows you to copy k eys around the remote contr ol, within a device, or from one device to another . Copying a Key 1. From ADVANCED FUNCTIO NS , use t he ARROW keys to s croll to KEY MOVER . Pres s OK . 2. T he remote displ ays ADD KE Y MOVER . Press OK . 3. T he remote displ ays FIND SO URCE MODE & PUS H OK . O n the bo[...]

14 5. T he remote displ ays DELE TING ALL PUS H OK TO CONFIR M . Press OK . 6. T he remote display s ALL MOVED KE YS DE LE TED PUS H OK TO DELETE MORE . Press OK to del ete keys for a di f ferent device o r SET to exi t. Deleting a Single Copied Key 1. From th e ADD KEY MOVER screen, scroll t o DELETE KE Y MOVER . Pres s OK . 2. T he remote displ a[...]

15 Adding a Key Macro: 1. From ADVANCED FUNCTIO NS , use t he ARROW keys to s croll to KEY MACRO . Press OK . 2. T he remote displ ays ADD KE Y MACRO . Press OK . 3. T he remote displ ays SEL EC T MACRO KEY . Se lec t any key but Set, Z -Wave, OK or Ar row s (scroll l ef t & scro ll right ) to s tore your m acro. 4. T he remote display s ENTE R[...]

16 3. T he remote displ ays SEL EC T MACRO KEY TO DELE T E AND PUSH OK . 4. O nce you ha ve press ed a valid ma cro key , th e remote display s MACRO DELE TE D CHOOS E ANOTHER OR O K TO EX IT . 5. Repea t ste ps 2 –4 ab ove until yo u have f ini shed del eting key macros . Press SE T when f inishe d to return to normal o perat ion. Learning Y our[...]

17 5. T he remote displ ays SEL EC T THE KE Y TO LE ARN TO . All keys except SET , Z- W a ve , OK , or Arrows (scroll l ef t & scro ll right ) are available for lear ning. Pres s the key you want to te ach the comm an d to. 6. T he remote display s WHEN BACKL IGHT T URNS OFF PUS H TEACHING KEY . T he back light turns of f . The di splay rea ds [...]

18 Deleting a Single Learned Key T o delete a single learned key, follow steps 1–3 above. Then perform the following steps: 1. Press t he key containing the l earne d func tio n to be del eted. T he remo te displays KEY DELE T ED PUSH OK TO DELE T E ANOTHER . 2. P res s SE T to exit or OK to delete anothe r learne d key . Setting the LCD Display?[...]

19 Resetting the Remote Resetting All Audio/Video Featur es Y ou can reset all the remote’s pr ogramming, including Key Mover , Key Macro , Learning, and Volume Lock, except for device codes. T o reset all programming, perform the following steps: 1. From ADVANCED FUNCTIO NS , scroll to RE SE T REMOTE . Press OK . 2. T he remote displ ays TO RESE[...]

20 Z-Wave Ov er view Please note: The terms “Device” , “Node” and “Light” all refer to an individual Z-Wave enabled device in your home control network and are interchangeable within the context of these instructions. If this remote is used as the primary contr oller , you must use it to create your contr ol network. You can use multipl[...]

21 Z-Wave T erminology Primary Controller : This is the main device used to set up and control your Z-Wav e network. There can only be one primary controller and it must be used to add or delete devices. A primary controller can be a portable device like a hand-held remote, a static controller (permanently installed & never moved), or a Z-Wave [...]

22 Wireless Range This device complies with the Z-Wave standard of open-air , line of sight transmission distances of 65 feet . Actual performance in a home depends on the number of walls between the r emote controller and the destination device, the type of construction and the number of Z-Wave enabled devices installed in the control network. Eve[...]

23 Notes on Network Management 1. “ Ad d a node, group or s cene” can also be referred to a s “include a node, group or s cene. ” “Remove a no de, group or scene” can also be referred to a s “E xclude a nod e, group or scene.” 2. If the screen d isplay s FA I L du ring t he setup or pro gramming proces s, you have p resse d an inval[...]

24 Z-Wave K ey Chart A . SE T – Press & hold to enter setup mode. When in setup mode, press & r elease to back up one level in the setup menu or press & hold to cancel setup. B. SHIFT – For use in Z-Wave setup & operation modes. Press & release to shift number key fr om devices 1 – 9 to 10 – 18. C. ARROWS – scroll left[...]

25 A B C D E F G H I J K L M N[...]

26 Z-Wave Setup Devices / Lights / Nodes Adding a Device (Node / Light) to the Network In order to contr ol the lights, they must be Z-Wave enabled and you must first add them to your home netw ork . There are tw o ways to do this. 1. Add light s to your remote so t hat t hey can be cont rolle d individually u sing the numbe r keys (maximum of 18) [...]

27 2. Ad d device s to your home net wor k (maximum of 23 2) wit hout assignin g them to a sp ecif ic numbe r key . T hese de vices can only be co ntroll ed th rough t he GROUP , SCENE or ALL comm an ds . Add a device without assigning it to a specific number key 1. Enter Z -Wave setup mod e. LIGHT S E TUP i s the defaul t option . 2. P res s OK ; [...]

28 Turning a Light On or Off • T o turn a light o n, press an d releas e the CH + key for les s than one se cond. T he screen will d isplay ON ab ove the se lec ted Light/Node. • T o turn a light of f, press and rele ase t he CH - key for less t han one se cond. T he screen will d isplay OFF above the se lec ted Light/Node. Setting a Light’s [...]

29 6. W hen the s creen displ ays SUCCESSF UL , the d evice ha s been delete d from your net wor k and reset to i t s fac tor y defaul t s. Groups Y ou can create a collection of devices (lights / nodes) that you can turn On or Off as a group. Y ou can create up to a maximum of 18 groups. A gr oup can contain up to 232 devices. Create a Group or Ad[...]

30 • T o turn a GROUP of f, press and relea se the CH - key for le ss than on e second . The s creen will dis play OFF above t he selected GROUP . Removing a Device (Node / Light) From a Gr oup: This only removes the device fr om a specific group. The device is still part of your home control network and the gr oup still exists (if there wer e mo[...]

31 Scenes can include lights from differ ent groups. Adding a Device (Node / Light) to a Scene 1. Enter Z -Wave setup mode and hi ghlight SCENE SETUP 2. P res s OK ; t he screen wi ll displa y ADD 3. P re ss OK ; the screen w ill displ ay SEL DI GIT 4. Pres s a digi t ( 1 -9) for the s cene you wi sh to add t he device to. Press SHIF T and t he dig[...]

32 • T o turn a SCENE of f, press and relea se th e CH - key for less than on e second . The s creen will dis play OFF above t he selected SCENE . Removing a Device (Node / Light) From a Scene This only removes the device fr om a specific scene. The device is still part of your home control network and the scene still exists (if there is mor e th[...]

33 1. Enter Z -Wave setup mode and hi ghlight LIGHT SETUP , GROUP SETUP or SCENE SETUP . Pres s OK . 2. Use t he ARROW ke ys to scro ll to LAB EL . 3. P re ss OK ; the screen w ill displ ay SEL DI GIT 4. Pres s a digi t ( 1 -9) for the LIGHT , GROUP or SCENE you would like to label. Pres s SHIF T and t he digit (1 -9) if you are labeling for keys 1[...]

34 Adding or Excluding a Device T o / From All Control Menu options under ALL SETUP include E XCLUDE ALL ON OFF , INCLUDE ALL ON OFF , E XCL UDE ALL ON ONL Y and E XCLUDE ALL OFF ONL Y . 1. Enter Z -Wave setup mode and hi ghlight ALL SE TUP . 2. P res s OK ; t he screen wi ll displa y EXCLUDE ALL/ON OFF 3. Use t he ARROW key s to scroll to th e des[...]

35 e. SUNDA Y (The event w ill only occur on Sund ays) f. MONDA Y ( The event will o nly occur on Mond ays) g. TUESDA Y (T he event will on ly occur on T ues day s) h. WEDNESDA Y (T he event will only o ccur on Wednesda ys) i. THURSDA Y (The e vent will only occur on T hursd ays) j. FRIDA Y ( The event will o nly occur on Fridays) k. SA TURDA Y (Th[...]

36 14 . T o set t he OFF TIME of your event; a. Use t he ri ght or lef t ARROW keys to scroll r ight or l ef t . b. Press th e CH + key to move hour , minu te, AM or PM for ward s. c. Pres s the CH - key to move the hour , minute, AM or PM backwa rds. 15. When you’ve se t the OFF TIME , pres s OK ; the s creen will display SUC CESSFU L indicat in[...]

37 Adding a Thermostat: 1. Enter Z -Wave setup mode and hi ghlight T H E R M O S TAT 2. P res s OK and t he screen will d isplay ADD 3. P re ss OK and t he screen wi ll displ ay SETUP WAITING 4. Pres s the b ut ton on t he th ermos tat ’ s Z -Wave inter face 5. W hen th e screen disp lays SUCCESS , you have successf ully adde d the THERMOS T A T [...]

38 T o Change Advanced Configuration Settings: 1. Enter Z -Wave setup mode and hi ghlight ADV . CONFIG . 2. P res s OK and s creen will disp lay PA R AM E T E R 0 3. Use eit her ARROW key to scroll unt il t he disp lay read s the prope r parameter numb er (1 - 2 55 ) as indi cated in t he Z -Wave device’ s ins truc tions 4. Press OK and the scree[...]

39 T o send device and network information to a secondary remote: 1. Enter Z -Wave setup mode and hi ghlight TRANSFER 2. P res s OK ; t he screen wi ll displa y CREA TE SECOND ARY 3. P re ss OK ; the screen w ill displ ay ALL 4. Pl ace the Second ar y remote in RECEIVE mode. See th e following se c tion o n “Receiving Net work and D evice Informa[...]

40 Pleas e refer to its in st ruc ti ons for details . 8. Ch ange indivi dual device s, groups , scenes, etc . on t he new secondary remo te as needed. Controller Swap (T ransfer Primary) Y ou can transfer all of your remote’s information to another remote, so it becomes the new Primary r emote and the original remote becomes a secondary contr ol[...]

41 6. Pl ace the Second ar y remote in RECEIVE mode. See th e following se c tion o n “Receiving Net work and D evice Informat ion” if t he Second ar y remote is a GE 4 5608 remote. If the Secon dar y remote is a dif ferent G E model o r dif ferent brand, ple ase refer to it s ins tr uc tions for d etails. 7 . Af ter the Se condar y remote is i[...]

42 Resetting Y our Network Y ou can reset your netw ork to clear all device and Z-Wave network information from the r emote. This does not reset the Z-Wave devices to their factory default . Each device still needs to be deleted in order to r eset them. Please refer to the section on “Deleting a Device (Node/Light) from Y our Network” for detai[...]

43 Network Update This function only works if y ou have a Static Update Controller (SUC) in your network. An SUC is permanently installed in a specific location and helps maintain up-to-date “neighbor lists” and routing tables for your control netw ork . This command sends a request to the SUC for the current network topology and ensur es that [...]

44 W ARRANT Y JASCO Products w arrants this product to be free fr om manufacturing defects for a period of two years from the original date of consumer purchase. This warranty is limited to the repair or r eplacement of this product only and does not extend to consequential or incidental damage to other products that may be used with this product .[...]

45 Setup Codes for Compatible Brands of Audio/Video Devices For Audio - Receiver ADC . . . . . . . . . . . . . . . . . . . . . . . . . 0531 Aiwa . . . . . . . 1405, 0121, 1388, 1641 Alco . . . . . . . . . . . . . . . . . . . . . . . . . 1390 AMC . . . . . . . . . . . . . . . . . . . . . . . . . 1077 Anam . . . . . . . . . . . . . . . . . . 1609, 10[...]

46 For Audio - Cassette Deck Aiwa . . . . . . . . . . . . . . . . . . . . . . . . . 0029 Carver . . . . . . . . . . . . . . . . . . . . . . . 0029 Denon . . . . . . . . . . . . . . . . . . . . . . . 0076 Grundig . . . . . . . . . . . . . . . . . . . . . 0029 Harman/Kardon . . . . . . . 0182, 0029 JVC . . . . . . . . . . . . . . . . . . . . . . . . [...]

47 For Cable Set T op Box A-Mark . . . . . . . . . . . . . . . . 0008, 0144 ABC . . . . . . . . . . . . . 0237, 0003, 0008 Accuphase . . . . . . . . . . . . . . . . . . 0003 Acorn . . . . . . . . . . . . . . . . . . . . . . . . 0237 Action . . . . . . . . . . . . . . . . . . . . . . . 0237 Active . . . . . . . . . . . . . . . . . . . . . . . 0237 A[...]

48 For Satellite Set Top Box, cont . Mitsubishi . . . . . . . . . . . . . . . . . . . 0749 Motorola. . . . . . . . . . . . . . . . . . . . . 0856 Optimus . . . . . . . . . . . . . . . . . . . . . 0724 Panasonic . . . . . . . . . . . . . 0247, 0701 Paysat . . . . . . . . . . . . . . . . . . . . . . . 0724 Philips . . . . .1142, 0749, 1749, 0775, . .[...]

49 For Video - DVD , cont . Kloss . . . . . . . . . . . . . . . . . . . . . . . . 0533 Lasonic . . . . . . . . . . . . . . . . . . . . . . 0627 Lecson . . . . . . . . . . . . . . . . . . . . . . 1533 LG . . . . . . . . . . . . . . . . . . . . . . . . . . . 0591 Magnasonic . . . . . . . . . . . . . . . . . 0675 Magnavox . 0503, 0539, 0646, 0675 Mara[...]

50 For Video - V CR , cont . Garrard . . . . . . . . . . . . . . . . . . . . . . 0000 Gateway. . . . . . . . . . . . . . . . . . . . . 1972 GE . . . 0060, 0035, 0000, 0807, 1060 Gemini . . . . . . . . . . . . . . . . . . . . . . 0060 Genexxa . . . . . . . . . . . . . . . . . . . . . 0000 Go Video . . . . . . . . . . . . . . . . . . . . . 0614 GoldS[...]

51 For T elevision A-Mark . . . . . . . . . . . . . . . . 0047, 0054 Accuscan . . . . . . . . . . . . . . . . . . . . 0047 Action . . . . . . . . . . . . . . . . . . . . . . . 0030 Admiral . . . . . . . . . . 0047, 0054, 0017, . . . . . . . . . . . . 0051, 0093, 0463, 0180 Advent . . . . . . . . . . . . . . . . . . . . . . 0761 Adventuri . . . . . [...]

52 For T elevision, cont . Aventura . . . . . . . . . . . . . . . . . . . . 0171 Baysonic . . . . . . . . . . . . . . . . . . . . 0180 Beaumark . . . . . . . 0017, 0178, 0030 Belcor . . . . . . . . . . . . . . . . . . . . . . . 0030 Bell & Howell . . . . . 0054, 0154, 0093 Bradford . . . . . . . . . . . . . . . . . . . . . 0180 Brockwood . . . [...]

53 For T elevision, cont . KEC . . . . . . . . . . . . . . . . . . . . 0180, 0060 Kenwood . . . . . . . . . . . . . . 0180, 0030 KLH . . . . . . . . . . . . . 0156, 0180, 0765 Kloss . . . . . . . . . . . . . . . . . . . . . . . . 0030 Konka . . . . . . . . . . . . . . . . . . . . . . . 0180 KT V . . . . . . . . . . . . . . 0463, 0180, 0030 Lark . .[...]

54 For T elevision, cont . Sheng Chia . . . . . . . . . . . . . . . . . . 0093 Shivaki. . . . . . . . . . . . . . . . . . . . . . . 0178 Siemens . . . . . . . . . . . . . . . . . . . . . 0145 Signature . . . . . . . . 0047, 0093, 0030 Simpson . . . . . . . . . . . . . . . 0178, 0030 Singer . . . . . . . . . . . . . . . . . 0060, 0092 Solar Drape . [...]