Gigabyte GA-G31M-ES2C manuale d’uso

GA-G31M-ES2L/ GA-G31M-ES2C LGA775 socket motherboard for Intel ® Core TM processor family/ Intel ® Pentium ® processor family/Intel ® Celeron ® processor family User's Manual Rev . 1 103 12ME-G31MES2L-1 103R[...]

Jul. 21, 2008 Motherboard GA-G31M-ES2L Motherboard GA-G31M-ES2L Jul. 21, 2008[...]

Nov. 10, 2008 Motherboard GA-G31M-ES2C Motherboard GA-G31M-ES2C Nov. 10, 2008[...]

Copyright © 2008 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE witho[...]

- 5 - T able of Contents Box Contents ................................................................................................................. 7 Optional Items ................................................................................................................. 7 GA-G31M-ES2L/GA-G31M-ES2C Motherboard Layout ....................[...]

- 6 - Chapter 3 Drivers Installation ...................................................................................... 55 3 -1 Installing Chipset Dr ivers ............................................................................... 5 5 3 -2 Application Software ................................................................................[...]

- 7 - Box Contents GA-G31M-ES2L or GA-G31M-ES2C motherboard Motherboard driver disk User's Manual One IDE cable and one floppy disk drive cable T wo SA T A 3Gb/s cables I/O Shield Optional Items 2-port USB 2.0 bracket (Part No. 12CR1-1UB030-51R) 2-port SA T A power cable (Part No. 12CF1-2SERPW-01R) S/PDIF out cable (Part No. 12CR1-1SPOUT -02R)[...]

- 8 - GA-G31M-ES2L/GA-G31M-ES2C Motherboard Layout KB_MS CPU_FAN LGA775 ATX GA-G31M-ES2L/GA-G31M-ES2C F_AUDIO SYS_FAN PCIE_16 IDE BAT IT8718 ATX_12V Intel ® G31 USB LAN AUDIO LPT R_USB COMA CLR_CMOS FDD DDRII1 DDRII2 VGA Intel ® ICH7 SATAII0 F_PANEL PWR_LED CI CD_IN F_USB1 CODEC SPDIF_O M_BIOS PCI1 PCI2 F_USB2 PCIE_1 SATAII2 SATAII3 SATAII1 B_BIO[...]

- 9 - Block Diagram Only for GA-G31M-ES2L. Only for GA-G31M-ES2C. LGA775 Processor Host Interface Intel ® G31 GMCH CLK (333/266/200 MHz) Intel ® ICH7 2 PCI PCI Bus PCI Express Bus Dual Channel Memory 4 SA T A 3Gb/s PCI CLK (33 MHz) PCIe CLK (100 MHz) PCI Express x16 8 USB Ports IT8718 Floppy PS/2 KB/Mouse LPT Port CPU CLK+/- (333/266/200 MHz) D-S[...]

- 10 -[...]

Hardware Installation - 11 - 1 -1 Installation Precautions The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's manual and follow these procedures: • Prior to installation, do not remove or break mo[...]

GA-G31M-ES2L/ES2C Motherboard - 1 2 - 1 -2 Product Specifications CPU  Support for an Intel ® Core TM 2 Extreme processor/ Intel ® Core TM 2 Quad processor/Intel ® Core TM 2 Duo processor/ Intel ® Pentium ® processor Extreme Edition/Intel ® Pentium ® D processor/ Intel ® Pentium ® 4 processor Extreme Edition/Intel ® Pentium ® 4 proces[...]

Hardware Installation - 13 - Internal Connectors  1 x 24-pin A TX main power connector  1 x 4-pin A TX 12V power connector  1 x floppy disk drive connector  1 x IDE connector  4 x SA T A 3Gb/s connectors  1 x CPU fan header  1 x system fan header  1 x front panel header  1 x front panel audio header  1 x CD In connecto[...]

GA-G31M-ES2L/ES2C Motherboard - 1 4 - Unique Features  Support for @BIOS  Support for Q-Flash  Support for Virtual DualBIOS  Support for Download Center  Support for Xpress Install  Support for Xpress Recovery2  Support for EasyTune (Note 4)  Support for Easy Energy Saver (Note 5) Bundled Software  Norton Internet Securit[...]

Hardware Installation - 15 - 1 -3 Installing the CPU and CPU Cooler Read the following guidelines before you begin to install the CPU: • Make sure that the motherboard supports the CPU. (Go to GIGABYTE's website for the latest CPU support list.) • Always turn off the computer and unplug the power cord from the power outlet before installin[...]

GA-G31M-ES2L/ES2C Motherboard - 1 6 - B . Follow the steps below to correctly install the CPU into the motherboard CPU socket. Step 2: Lift the metal load plate from the CPU socket. (DO NOT touch socket contacts.) Step 4: Hold the CPU with your thumb and index fingers. Align the CPU pin one marking (triangle) with the pin one corner of the CPU sock[...]

Hardware Installation - 17 - 1-3-2 Installing the CPU Cooler Follow the steps below to correctly install the CPU cooler on the motherboard. (The following procedure uses Intel ® boxed cooler as the example cooler.) Step 1: Apply an even and thin layer of thermal grease on the surface of the installed CPU. Step 3: Place the cooler atop the CPU, ali[...]

GA-G31M-ES2L/ES2C Motherboard - 1 8 - 1 -4 Installing the Memory Read the following guidelines before you begin to install the memory: • Make sure that the motherboard supports the memory. It is recommended that memory of the same capacity, brand, speed, and chips be used. (Go to GIGABYTE's website for the latest memory support list.) • Al[...]

Hardware Installation - 19 - 1-4-2 Installing a Memory Notch DDR2 DIMM Before installing a memory module , make sure to turn off the computer and unplug the power cord from the power outlet to prevent damage to the memory module. DDR2 DIMMs are not compatible to DDR DIMMs. Be sure to install DDR2 DIMMs on this motherboard. A DDR2 memory module has [...]

GA-G31M-ES2L/ES2C Motherboard - 2 0 - 1- 5 Installing an Expansion Card Read the following guidelines before you begin to install an expansion card: • Make sure the motherboard supports the expansion card. Carefully read the manual that came with your expansion card. • Always turn off the computer and unplug the power cord from the power outlet[...]

Hardware Installation - 21 - • When removing the cable connected to a back panel connector, first remove the cable from your device and then remove it from the motherboard. • When removing the cable, pull it straight out from the connector. Do not rock it side to side to prevent an electrical short inside the cable connector. Activity LED Conne[...]

GA-G31M-ES2L/ES2C Motherboard - 2 2 - Line In Jack (Blue) The default line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc. Line Out Jack (Green) The default line out jack. Use this audio jack for a headphone or 2-channel speaker. This jack can be used to connect front speakers in a 4/5.1-channel audio config[...]

Hardware Installation - 23 - 1 - 7 Internal Connectors Read the following guidelines before connecting external devices: • First make sure your devices are compliant with the connectors you wish to connect. • Before installing the devices, be sure to turn off the devices and your computer. Unplug the power cord from the power outlet to prevent [...]

GA-G31M-ES2L/ES2C Motherboard - 2 4 - 1/2) A TX_12V/A TX (2x2 12V Power Connector and 2x12 Main Power Connector) With the use of the power connector, the power supply can supply enough stable power to all the components on the motherboard. Before connecting the power connector, first make sure the power supply is turned off and all devices are prop[...]

Hardware Installation - 25 - 5 ) FDD (Floppy Disk Drive Connector) This connector is used to connect a floppy disk drive. The types of floppy disk drives supported are: 360 KB, 720 KB, 1.2 MB, 1.44 MB, and 2.88 MB. Before connecting a floppy disk drive, be sure to locate pin 1 of the connector and the floppy disk drive cable. The pin 1 of the cable[...]

GA-G31M-ES2L/ES2C Motherboard - 2 6 - 6 ) IDE (IDE Connector) The IDE connector supports up to two IDE devices such as hard drives and optical drives. Before attaching the IDE cable, locate the foolproof groove on the connector. If you wish to connect two IDE devices, remember to set the jumpers and the cabling according to the role of the IDE devi[...]

Hardware Installation - 27 - 8 ) PWR_LED (System Power LED Header) This header can be used to connect a system power LED on the chassis to indicate system power status. The LED is on when the system is operating. The LED keeps blinking when the system is in S1 sleep state. The LED is off when the system is in S3/S4 sleep state or powered off (S5). [...]

GA-G31M-ES2L/ES2C Motherboard - 2 8 - 1 0 ) F_P ANEL (Front Panel Header) Connect the power switch, reset switch, speaker and system status indicator on the chassis front panel to this header according to the pin assignments below. Note the positive and negative pins before connecting the cables. The front panel design may differ by chassis. A fron[...]

Hardware Installation - 29 - 1 1 ) F_AUDIO (Front Panel Audio Header) The front panel audio header supports Intel H igh D efinition audio (HD) and AC'97 audio. Y ou may connect your chassis front panel audio module to this header. Make sure the wire assignments of the module connector match the pin assignments of the motherboard header. Incorr[...]

GA-G31M-ES2L/ES2C Motherboard - 3 0 - Pin No. Definition 1 Power (5V) 2 Power (5V) 3 USB DX- 4 USB DY - 5 USB DX+ 6 USB DY+ 7 GND 8 GND 9 No Pin 10 N C • Do not plug the IEEE 1394 bracket (2x5-pin) cable into the USB header. • Prior to installing the USB bracket, be sure to turn off your computer and unplug the power cord from the power outlet [...]

Hardware Installation - 31 - Open: Normal Short: Clear CMOS V alues 1 5 ) CLR_CMOS (Clearing CMOS Jumper) Use this jumper to clear the CMOS values (e.g. date information and BIOS configurations) and reset the CMOS values to factory defaults. T o clear the CMOS values, place a jumper cap on the two pins to temporarily short the two pins or use a met[...]

GA-G31M-ES2L/ES2C Motherboard - 3 2 -[...]

- 3 3 - BIOS Setup Chapter 2 BIOS Setup BIOS (Basic Input and Output System) records hardware parameters of the system in the CMOS on the motherboard. Its major functions include conducting the Power-On Self-T est (POST) during system startup, saving system parameters and loading operating system, etc. BIOS includes a BIOS Setup program that allows[...]

GA-G31M-ES2L/ES2C Motherboard - 34 - 2 -1 Startup Screen The following screen may appear when the computer boots. Function Keys: <DEL> : BIOS Setup/Q-Flash Press the <Delete> key to enter BIOS Setup or to access the Q-Flash utility in BIOS Setup. <F9> : Xpress Recovery2 If you have ever entered Xpress Recovery2 to back up hard dri[...]

- 3 5 - BIOS Setup 2 - 2 The Main Menu Once you enter the BIOS Setup program, the Main Menu (as shown below) appears on the screen. Use arrow keys to move among the items and press <Enter> to accept or enter a sub-menu. (Sample BIOS V ersion: EM1) Main Menu Help The onscreen description of a highlighted setup option is displayed on the bottom[...]

GA-G31M-ES2L/ES2C Motherboard - 36 -      The Functions of the <F11> and <F12> keys (For the Main Menu Only)  F1 1 : Save CMOS to BIOS This function allows you to save the current BIOS settings to a profile. Y ou can create up to 8 profiles (Profile 1-8) and name each profile. First enter the profile name (to erase the[...]

- 3 7 - BIOS Setup 2 -3 Standard CMOS Features Date Sets the system date. The date format is week (read-only), month, date and year. Select the desired field and use the up arrow or down arrow key to set the date. Time Sets the system time. For example, 1 p.m. is 13:0:0. Select the desired field and use the up arrow or down arrow key to set the tim[...]

GA-G31M-ES2L/ES2C Motherboard - 38 - The following fields display your hard drive specifications. If you wish to enter the parameters manually, refer to the information on the hard drive. Capacity Approximate capacity of the currently installed hard drive. Cylinder Number of cylinders. Head Number of heads. Precomp Write precompensation cylinder. L[...]

- 3 9 - BIOS Setup 2 -4 Advanced BIOS Features Hard Disk Boot Priority Specifies the sequence of loading the operating system from the installed hard drives. Use the up or down arrow key to select a hard drive, then press the plus key <+> (or <PageUp>) or the minus key <-> (or <PageDown>) to move it up or down on the list. P[...]

GA-G31M-ES2L/ES2C Motherboard - 40 - CPU Multi-Threading (Note) Allows you to determine whether to enable all CPU cores and multi-threading function when using an Intel ® CPU that supports multi-core technology. This feature only works for operating systems that support multi-processor mode. Enabled Enables all CPU cores and multi-threading capabi[...]

- 4 1 - BIOS Setup Init Display First Specifies the first initiation of the monitor display from the installed PCI graphics card, PCI Express graphics card or the onboard VGA. PC I Sets the PCI graphics card as the first display. (Default) Onboard Sets the onboard VGA as the first display. PE G Sets PCI Express graphics card as the first display. O[...]

GA-G31M-ES2L/ES2C Motherboard - 42 - 2 -5 Integrated Peripherals CMOS Setup Utility-Copyright (C) 1984-2008 A ward Software Integrated Peripherals On-Chip Primary PCI IDE [Enabled] On-Chip SA T A Mode [Auto] x P A TA IDE Set to Ch.0 Master/Slave SA T A Port 0/2 Set to Ch.2 Master/Slave SA T A Port 1/3 Set to Ch.3 Master/Slave USB Controller [Enable[...]

- 4 3 - BIOS Setup SA T A Port 1/3 Set to This value is dependent on the On-Chip SA T A Mode and P A T A IDE Set to settings. When P A T A IDE Set to is configured to Ch. 0 Master/Slave , this option will be automatically set to Ch. 1 Master/Slave . USB Controller Enables or disables the integrated USB controller. (Default: Enabled) Disabled will t[...]

GA-G31M-ES2L/ES2C Motherboard - 44 - When LAN Cable Is Functioning Normally... If no cable problem is detected on the LAN cable connected to a Gigabit hub or a 10/100 Mbps hub, the following message will appear: Start detecting at Port..... Link Detected --> 100Mbps Onboard LAN Boot ROM Allows you to decide whether to activate the boot ROM integ[...]

- 4 5 - BIOS Setup 2 -6 Power Management Setup ACPI Suspend T ype Specifies the ACPI sleep state when the system enters suspend. S1(POS) Enables the system to enter the ACPI S1 (Power on Suspend) sleep state. In S1 sleep state, the system appears suspended and stays in a low power mode. The system can be resumed at any time. S3(STR) E nables the sy[...]

GA-G31M-ES2L/ES2C Motherboard - 46 - Resume by Alarm Determines whether to power on the system at a desired time. (Default: Disabled) If enabled, set the date and time as following: Date (of Month) Alarm : Turn on the system at a specific time on each day or on a specific day in a month. Time (hh: mm: ss) Alarm : Set the time at which the system wi[...]

- 4 7 - BIOS Setup 2 -7 PnP/PCI Configurations PCI1 IRQ Assignment Auto BIOS auto-assigns IRQ to the first PCI slot. (Default) 3,4,5,7,9,10,1 1,12,14,15 Assigns IRQ 3,4,5,7,9,10,1 1,12,14,15 to the first PCI slot. PCI2 IRQ Assignment Auto BIOS auto-assigns IRQ to the second PCI slot. (Default) 3,4,5,7,9,10,1 1,12,14,15 Assigns IRQ 3,4,5,7,9,10,1 1,[...]

GA-G31M-ES2L/ES2C Motherboard - 48 - 2 -8 PC Health Status Reset Case Open Status Keeps or clears the record of previous chassis intrusion status. Enabled clears the record of previous chassis intrusion status and the Case Opened field will show "No" at next boot. (Default: Disabled) Case Opened Displays the detection status of the chassi[...]

- 4 9 - BIOS Setup 2 -9 MB Intelligent T weaker(M.I.T .) Robust Graphics Booster Robust Graphics Booster (R.G.B.) helps to enhance the performance of the graphics chip and memory. Auto allows the BIOS to automatically set the R.G.B. mode based on system configurations. Options are: Auto (default), Fast, Turbo. CPU Clock Ratio (Note) Allows you to a[...]

GA-G31M-ES2L/ES2C Motherboard - 50 - CPU Host Frequency (Mhz) Allows you to manually set the CPU host frequency. This item is configurable only if the CPU Host Clock Control option is enabled. The adjustable range is from 100 MHz to 700 MHz. For an 800 MHz FSB CPU, set this item to 200 MHz. For a 1066 MHz FSB CPU, set this item to 266 MHz. For a 13[...]

- 5 1 - BIOS Setup FSB OverV oltage Control Allows you to set the Front Side Bus voltage. Normal Supplies the FSB voltage as required. (Default) +0.1V ~ +0.3V Increases FSB voltage by 0.1V to 0.3V at 0.1V increment. CPU V oltage Control Allows you to set the CPU voltage. Normal sets the CPU voltage as required. The adjustable range is dependent on [...]

GA-G31M-ES2L/ES2C Motherboard - 52 - 2-10 Load Fail-Safe Defaults Press <Enter> on this item and then press the <Y> key to load the safest BIOS default settings. In case system instability occurs, you may try to load Fail-Safe defaults, which are the safest and most stable BIOS settings for the motherboard. 2 -1 1 Load Optimized Default[...]

- 5 3 - BIOS Setup 2-12 Set Supervisor/User Password CMOS Setup Utility-Copyright (C) 1984-2008 A ward Software  Sta ndard CMOS Features  Adva nced BIOS Features  Integrated Peripherals  Power Ma nagement Setup  PnP/PCI Configurations  PC Health Status  MB Intelligent Tweaker(M.I.T .) ESC: Quit  : Select Item F11: S[...]

GA-G31M-ES2L/ES2C Motherboard - 54 - 2-13 Save & Exit Setup 2-14 Exit Without Saving CMOS Setup Utility-Copyright (C) 1984-2008 A ward Software  Sta ndard CMOS Features  Adva nced BIOS Features  Integrated Peripherals  Power Ma nagement Setup  PnP/PCI Configurations  PC Health Status  MB Intelligent Tweaker(M.I.T .) ESC: Qu[...]

Drivers Installation - 55 - Chapter 3 Drivers Installation 3 -1 Installing Chipset Drivers • Before installing the drivers, first install the operating system. (The following instructions use Windows XP as the example operating system.) • After installing the operating system, insert the motherboard driver disk into your optical drive. The driv[...]

GA-G31M-ES2L/ES2C Motherboard - 56 - 3 -2 Application Software This page displays all the utilities and applications that GIGABYTE develops and some free software. Y ou can click the Install button on the right of an item to install it. 3 -3 T echnical Manuals This page provides GIGABYTE's application guides, content descriptions for this driv[...]

Drivers Installation - 57 - 3- 4 Contact Click the URL on this page to link to the GIGABYTE Web site. Or read the last page of this manual to check the contact information for GIGABYTE T aiwan headquarter or worldwide branch offices. 3 -5 System This page provides the basic system information.[...]

GA-G31M-ES2L/ES2C Motherboard - 58 - 3 - 6 Download Center T o update the BIOS, drivers, or applications, click the Download Center button to link to the GIGABYTE Web site. The latest version of the BIOS, drivers, or applications will be displayed.[...]

Unique Features - 59 - 4 -1 Xpress Recovery2 Xpress Recovery2 is a utility that allows you to quickly compress and back up your system data and perform restoration of it. Supporting NTFS, F A T32, and FA T16 file systems, Xpress Recovery2 can back up data on P A T A and SA T A hard drives and restore it. "*" Xpress Recovery2 checks the fi[...]

GA-G31M-ES2L/ES2C Motherboard - 60 - Figure 1 Figure 3 3 . Select a file system (for example, NTFS) and begin the installation of the operating system (Figure 3). Installation and Configuration (The following procedure uses Windows XP as the example operating system.) A. Installing Windows XP and Partitioning the Hard Drive 1 . Set CD-ROM drive as [...]

Unique Features - 61 - 4. After the operating system is installed, right-click the My Computer icon on your desktop and select Manage (Figure 4). Go to Computer Management to check disk allocation. Xpress Recovery2 will save the backup file to the unallocated space (black stripe along the top)(Figure 5). Please note that if there is no enough unall[...]

GA-G31M-ES2L/ES2C Motherboard - 62 - 2 . After you use the backup function in Xpress Recovery2 for the first time, Xpress Recovery2 will stay permanent in your hard drive. If you wish to enter Xpress Recovery2 later, simply press <F9> during the POST (Figure 9). Figure 8 Figure 9 B. Accessing Xpress Recovery2 1 . Boot from the motherboard dri[...]

Unique Features - 63 - E. Removing the Backup 1 . If you wish to remove the backup file, select REMOVE (Figure 15). 2 . After the backup file is removed, no backup image file will be present in Disk Management and hard drive space will be freed up (Figure 16). Figure 15 Figure 16 D. Using the Restore Function in Xpress Recovery2 Select RESTORE to r[...]

GA-G31M-ES2L/ES2C Motherboard - 64 - Because BIOS flashing is potentially risky, please do it with caution. Inadequate BIOS flashing may result in system malfunction. 4 -2 BIOS Update Utilities GIGABYTE motherboards provide two unique BIOS update tools, Q-Flash TM and @BIOS TM . GIGABYTE Q-Flash and @BIOS are easy-to-use and allow you to update the[...]

Unique Features - 65 - 3 . Select the BIOS update file and press <Enter>. Make sure the BIOS update file matches your motherboard model. Step 2: The process of the system reading the BIOS file from the floppy disk is displayed on the screen. When the message "Are you sure to update BIOS?" appears, press <Enter> to begin the BI[...]

GA-G31M-ES2L/ES2C Motherboard - 66 - Step 6: Select Save & Exit Setup and then press <Y> to save settings to CMOS and exit BIOS Setup. The procedure is complete after the system restarts. Press <Y> to load BIOS defaults Step 4: Press <Esc> and then <Enter> to exit Q-Flash and reboot the system. As the system boots, you s[...]

Unique Features - 67 - 4-2-2 Updating the BIOS with the @BIOS Utility A. Before Y ou Begin: 1 . In Windows, close all applications and TSR (T erminate and Stay Resident) programs. This helps prevent unexpected failures when performing a BIOS update. 2 . During the BIOS update process, ensure the Internet connection is stable and do NOT interrupt th[...]

GA-G31M-ES2L/ES2C Motherboard - 68 - Button Information T able 4 -3 EasyT une 5 Pro EasyTune TM 5 Pro, an easy-to-use and convenient system overclocking and management tool, lets you do overclock and overvoltage in Windows environment, eliminating the need to enter the BIOS Setup program. EasyTune 5 Pr o provides the following functions (Note 1) : [...]

Unique Features - 69 - 4 -4 Easy Energy Saver GIGABYTE Easy Energy Saver (Note 1) is a revolutionary technology that delivers unparalleled power savings with a click of the button. Featuring an advanced proprietary software design, GIGABYTE Easy Energy Saver is able to provide exceptional power savings and enhanced power efficiency without sacrific[...]

GA-G31M-ES2L/ES2C Motherboard - 70 - T otal Mode - Button Information T able B. T otal Mode In T otal Mode, users are able to see how much total power savings they have accumulated in a set period of time since activating Easy Energy Saver for the first time (Note 3) . (Note 1) Due to the hardware limitation, you must install the Intel ® Core TM 2[...]

Appendix - 71 - 5 -1 Configuring Audio Input and Output 5-1-1 Configuring 2/4/5.1/7.1-Channel Audio The motherboard provides three audio jacks on the back panel which support 2/4/5.1/7.1 (Note) -channel audio. The pic- ture to the right shows the default audio jack assignments. The integrated HD (High Definition) audio provides jack retasking capab[...]

GA-G31M-ES2L/ES2C Motherboard - 7 2 - Step 2: Click the Audio I/O tab. In the speaker list on the left, select 2CH Speaker , 4CH Speaker , 6CH Speaker , or 8CH Speaker according to the type of speaker configuration you wish to set up. Step 3: Everytime you connect an audio device to an audio jack, the Connected device box appears. Select the device[...]

Appendix - 73 - B. Configuring Sound Effect: Y ou may configure an audio environment on the Sound Effect tab. C. Activating an AC'97 Front Panel Audio Module: If your chassis provides an AC'97 front panel audio module, to activate the AC'97 functionality, click the tool icon on the Audio I/O tab. On the Connector Settings box, select[...]

GA-G31M-ES2L/ES2C Motherboard - 7 4 - 5-1-2 Installing the S/PDIFOut Cable (Optional) The S/PDIF out cable provides S/PDIF out functionalities. Step 1: First, attach the connector at the end of the cable to the SPDIF_O header on your motherboard. Step 2: Secure the metal bracket to the chassis back panel with a screw. S/PDIF out: The S/PDIF out jac[...]

Appendix - 75 - B. Configuring S/PDIF out: Click the tool icon in the DIGIT AL section. In the S/PDIF Settings dialog box, select an output sam- pling rate and select (or disable) the output source. Click OK to complete the configuration. S/PDIF Coaxial Cable S/PDIF Optical Cable Step 3: Connect a S/PDIF coaxial cable or a S/PDIF optical cable (eit[...]

GA-G31M-ES2L/ES2C Motherboard - 7 6 - Step 2: Connect your microphone to the Mic in jack (pink) on the back panel or the Line out jack on the front panel. Then configure the jack for microphone functionality. Note: The microphone functions on the front panel and back panel cannot be used at the same time. Step 3: Locate the V olume icon in your sys[...]

Appendix - 77 - or Select Realtek HD Audio Input in the Mixer device list Recording Control (Note) If you cannot find the volume control options you need in Master V olume , go to the Options menu and then choose Properties . Select the volume con- trol options you wish to show and click OK to complete. Step 4: T o hear the sound being recorded dur[...]

GA-G31M-ES2L/ES2C Motherboard - 7 8 - Step 6: T o raise the recording and playing sound for the microphone, go to Options in Master V olume and select Advanced Controls . Click the Advanced button under a volume control option (e.g. Front Green In, Front Pink In). In the Other Controls field, select the 1 Microphone Boost check box. Step 7: After c[...]

Appendix - 79 - 5 -2 T roubleshooting 5-2-1 Frequently Asked Questions T o read more FAQs for your motherboard, please go to the SupportMotherboardF AQ page on GIGABYTE's website. Q : In the BIOS Setup program, why are some BIOS options missing? A : Some advanced options are hidden in the BIOS Setup program. Press <Delete> to enter BIO[...]

GA-G31M-ES2L/ES2C Motherboard - 8 0 - 5-2-2 T roubleshooting Procedure If you encounter any troubles during system startup, follow the troubleshooting procedure below to solve the problem. Turn off the power. Remove all peripherals, connecting cables, and power cord etc. The problem is verified and solved. Ye s No A Check if the CPU cooler is attac[...]

Appendix - 81 - No Ye s Check if there is display on your monitor. Ye s When the computer is turned on, is the CPU cooler running? No The graphics card, expansion slot, or monitor might fail. Turn off the computer. Plugg in the keyboard and mouse and restart the computer. No Ye s Check if the keyboard is working properly. No Ye s Reinstall the oper[...]

GA-G31M-ES2L/ES2C Motherboard - 8 2 - 5 -3 Regulatory Statements Regulatory Notices This document must not be copied without our written permission, and the contents there of must not be imparted to a third party nor be used for any unauthorized purpose. Contravention will be prosecuted. We believe that the information contained herein was accurate[...]

Appendix - 83 - Finally, we suggest that you practice other environmentally friendly actions by understanding and using the energy-saving features of this product (where applicable), recycling the inner and outer packaging (including shipping containers) this product was delivered in, and by disposing of or recycling used batteries properly. With y[...]

GA-G31M-ES2L/ES2C Motherboard - 8 4 -[...]

Appendix - 85 -[...]

GA-G31M-ES2L/ES2C Motherboard - 8 6 -[...]

Appendix - 87 - Contact Us      GIGA-BYTE TECHNOLOGY CO., L TD. Address: No.6, Bau Chiang Road, Hsin-Tien, T aipei 231, T aiwan TEL: +886-2-8912-4000 FAX: +886-2-8912-4003 T ech. and Non-T ech. Support (Sales/Marketing) : http://ggts.gigabyte.com.tw WEB address (English): http://www.gigabyte.com.tw WEB address (Chinese): http://www.g[...]

GA-G31M-ES2L/ES2C Motherboard - 8 8 -      G.B.T. TECHNOLOGY TRADING GMBH - Germany WEB address : http://www.gigabyte.de      G.B.T . TECH. CO., L TD. - U.K. WEB address : http://www.giga-byte.co.uk      GIGA-BYTE TECHNOLOGY B.V. - The Netherlands WEB address : http://www.giga-byte.nl     [...]