Graco 312394V manuale d’uso

Instructions - Parts PR70 ™ and PR70v ™ Feed Systems Fixed or variable ratio systems. For accurate metering, mixing, and dispensing of two-component materials. For professional use only. Not approved for use in European explosive atmosphere locations. 3000 psi (21 MPa, 207 bar) Maximum Working Pressure 100 psi (0.7 MPa, 7 bar) Maximum Air Inlet[...]

Related Manuals 2 312394V Contents Related Manuals ........................... 2 Product Configurator ....................... 3 Warnings ................................ 1 0 Grounding ............................... 1 2 Installation ............................... 1 3 Polyethylene Tank Lid with Agitator ......... 1 3 Pneumatic Agitator Motor ......[...]

Product Configurator 312394V 3 Product Configurator An example of the product configurator would be the following configurator code. The following part number fields apply for the PR70 and PR70v part numbering configurator fields. Shaded items listed in the configurator table below are “Super Standard” items that are typically stocked and provi[...]

Product Configurator 4 312394V 4 140, Available in Nylon Only 5 160 6 180 7 200 8 220 9 240 A 260 B 280 C 300 F 320 G 360 H 400 J 440 L 480 M 520 R 560 S 600 T 640 U 720 W 800 X 880 Y 960 Z Custom High Volume side, consult fac- tory (stainless steel only) Code D Part Low Volume Side Piston and Metering Tube Material A LC1___ Nylon Piston, Stainless[...]

Product Configurator 312394V 5 C3 LC0163 Recirculating, On-Board Tanks, 3/16 in. (4.8 mm) - 15 ft (4.6 m) C4 LC0164 Recirculating, On-Board Tanks, 1/4 in. (6.5 mm) - 2.5 ft (0.6 m) C5 LC0165 Recirculating, On-Board Tanks, 1/4 in. (6.5 mm) - 10 ft (3.0 m) C6 LC0166 Recirculating, On-Board Tanks, 1/4 in. (6.5 mm) - 15 ft (4.6 m) C7 LC0167 Recirculati[...]

Product Configurator 6 312394V GH LC0406 High Pressure, 3/4 in. (19 mm) - 10 ft (3.0 m) GJ LC0407 High Pressure, 3/4 in. (19 mm) - 15 ft (4.6 m) GK LC0432 High Pressure, Recirculating, On-Board Tanks, 3/8 in. (9.5 mm) - 2.5 ft (0.6 m) GL LC0433 High Pressure, Recirculating, On-Board Tanks, 3/8 in. (9.5 mm) - 10 ft (3.0 m) GM LC0434 High Pressure, R[...]

Product Configurator 312394V 7 Code M Part Applicator Mounting N LC0294 None, Customer Mount Controls and Applicator 1 LC0292 Mast Mount, Controls & MD2 Applica- tor Machine Mounted 2 LC0293 Mast Mount, Controls Only 3 256439 Tank Stand Mount, Controls & MD2 Applicator Machine Mounted 4 256438 Tank Stand Mount, Controls Only Code N Part Pow[...]

Product Configurator 8 312394V W LC0129 8 L, Twin Polyethylene Tanks and Lids, Two 240V Agitators, with Shut-Off Valves X LC0160 Accumulator, Fluoroelastomer Y LC0297 Accumulator, EP Z LC0237  7.5 L, Stainless Steel, High Level Sen- sors, 240V Heat ---  When ordering tanks for spare or replacement parts, refer to Parts , page 27. Code Q Part [...]

Product Configurator 312394V 9 U LC0132 On-Board, Pneumatic Agitate, De-gas, Fill Port V LC0142 Off-Board Pneumatic Agitator - 30 L W LC0143 Off-Board Pneumatic Agitator - 60 L Z LC0146 Off-Board Vacuum De-gas, Pneu- matic Agitator, Fill Port, Slinger - 30 L Code T Part Tank Level Sensors N N/A None 2 LC0278 Polyethylene Tanks - Low Level Sen- sors[...]

Warnings 10 312394V Warnings The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclama- tion point symbol alerts you to a general warning and the hazard symbol refers to procedure-specific risk. Refer back to these warnings. Additional, product-specific warnings may be found throughout the body[...]

Warnings 312394V 11 FIRE AND EXPLOSION HAZARD Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help prevent fire and explosion: • Use equipment only in well ventilated area. • Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and plastic drop cloths (potential stat[...]

Grounding 12 312394V Grounding Products that include electric agitators, heated hoses, or heated tanks must be grounded. In the event of an elec- trical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric cur- rent. This product is equipped with a cord having a grounding wire with an appropriate [...]

Installation 312394V 13 Installation Polyethylene Tank Lid with Agitator 1. Remove tethered quick-release pin (213) from both sides of tank support beam (224). 2. Slide the clamp (222) out of each side of the sup- port beam (224) until it hits the stop. 3. Rotate the clamp (222) 180 degrees about the shoulder screw (214) so it is hanging freely. 4.[...]

Installation 14 312394V Pneumatic Agitator Motor Ground Pneumatic Agitator Motor To ground the agitator connect one end of the ground wire (A) to the ground connector (B) on the agitator mounting bracket. Connect the other end of the wire to a true earth ground. For a replacement ground wire and clamp, order Part 237569. Level Sensors Polyethylene [...]

Installation 312394V 15 Stainless Steel Tanks 1. Empty the tank. 2. Insert the PTFE proximity sensor well (2102) into the tank and turn until flush with the flat face of the tank. 3. Insert the proximity sensor (2101) into the proximity sensor well (2102). 4. Hand tighten the well cap (2103) into the proximity sensor well. 5. Plug the sensor connec[...]

Installation 16 312394V Auto-Refill Installation The Auto-Refill assembly is shipped uninstalled. The Auto-Refill assembly can be installed in multiple places on the tanks. See F IG .5 . Pressure Transducer and Flow Meter Installation See manual 312760. F IG . 5: Auto-Refill Installation Locations ti12393a 1 Possible locations for Auto-Refill insta[...]

Startup 312394V 17 Startup 1. Locate power switch at rear of machine and turn power on. The display module will automatically turn on and begin to load. 2. Slide the system air pressure relief switch up. It is the yellow tab located at the rear, left of the machine. The hole in the tab should not be showing. 3. For systems with an Advanced Display [...]

Pressure Relief Procedure 18 312394V Pressure Relief Procedure Models with Advanced Display Module 1. Place a waste container below the dispense valve. 2. Navigate to the Manual screen. 3. Press the Open Dispense Valve button on the Man- ual screen to relieve chemical pressure. 4. Press the Machine Disable Mode button ( ). 5. Press the system air p[...]

Setup 312394V 19 Setup Level Sensor Calibration Polyethylene Tanks 1. Empty tanks by executing multiple shots. 2. Relieve pressure. See Pressure Relief Procedure , page 18. 3. With the level sensor installed, locate the “[OUT OFF]” button. Activate teach mode by holding the button down for at least two seconds but no more than six seconds. 4. T[...]

Setup 20 312394V Vacuum De-gas 1. Models with ADM: To prevent machine movement, press the Machine Disable Mode key ( ). Models with SDM: To prevent machine movement, press the Red button . 2. Close the shut-off ball valves at the base of the tanks. 3. If the tank lid has a fill port, turn off any systems that might refill the tank during the vacuum[...]

Setup 312394V 21 Vacuum De-gas and Vacuum Auto-Fill 1. Press the Select Operating Mode button ( ) repeatedly to select Shot, Sequence, or Operator (Manual) mode. 2. Close the shut-off ball valves at the base of the tanks. 3. If the tank lid requires a desiccant dryer or nitrogen pump installed, install one into the top ball valve of the vacuum tree[...]

Setup 22 312394V Accumulator Filling 1. Relieve accumulator air pressure to zero using accumulator air pressure regulator (106). 2. Install material feed line to accumulator material inlet (143a) on refill valve (143). 3. Place a waste container below the ball valve (109). 4. Open the ball valve (109). 5. Slowly increase air pressure until the accu[...]

Shutdown 312394V 23 Shutdown If the machine is to remain idle for an extended period of time, perform the following steps. 1. Place a waste container below the dispense valve. 2. If installed, remove static mixer from the end of the dispense valve. 3. Place a container below the dispense valve and activate a small shot to flush mixed material out o[...]

Repair 24 312394V Repair Tank Removal 1. On models without ball valves, empty tanks by executing multiple shots. On models with ball valves, close the ball valves. 2. Relieve pressure. See Pressure Relief Procedure , page 18. 3. For polyethylene tank models, remove the two screws (211) that attach the tank T-beam support to the pump sub-assembly. 4[...]

Repair 312394V 25 Stainless Steel Tanks 1. Remove the stainless steel tanks from the base. 2. Remove four long screws (506d) holding the ball valve assembly together. 3. Remove three screws (505) holding the tank to the top plate of the ball valve assembly. Ball Valve Repair 1. Remove ball valve from tank. 2. Check o-rings and replace as necessary.[...]

Repair 26 312394V Agitator Fuse Replacement 1. Slide open the fuse drawer (706). 2. Remove old fuse (707) and replace with new fuse. 706 707 ti12559a[...]

Parts 312394V 27 Parts Accumulators, Assemblies LC0160 and LC0297 126 127 128 124 144 144 122 123 129 136 130 131 132 133 127 111, 121 112 143 142 113 141 114 115 119 116 118 116 117 Apply thread sealant tape to male npt threads prior to installation. 1 ti12449a[...]

Parts 28 312394V Accumulators, continued 105 108 125 120 140 139 137 138 102 103 135 135 106 135 103 108 109 107 134 101 Apply thread sealant tape to male npt threads prior to installation. 1 ti12472a[...]

Parts 312394V 29 ✖ Not shown. Ref Part Description Qty 101 15T679 COVER, front, accumulator, mild steel, PR70 1 102 01/1449/99 COVER, back, accumulator, mild steel 1 103 96/0282/98 FASTENER, screw, button head cap screw, 8-32 x 0.38, stainless steel 6 104 84/1460-1/11 LABEL, accumulator, air pressure 1 105 82/0053/11 GAUGE, 0-30psi, 2 in., 1/8 np[...]

Parts 30 312394V 8 Liter Polyethylene Tanks CAUTION The electric agitators used with on-board tanks will fail prematurely when material viscosity exceeds 24,000 cps. Use pneumatic agitators if material vis- cosity exceeds 24,000 cps. 216 209 220 203 207 223 210 202 215 218 219 201 217 201 204 214 222 221 205 211 224 208 206 213 212 Apply thread sea[...]

Parts 312394V 31 * Parts included in kit 255481. † Parts included in kit 255479.  Parts included in kit 255480. ** Part not shown. Ref Part Description Quantity 255241, Tank 255281, Tank with Ball Valves 255282, Tank with Ball Valves and One 120V Agitator 255283, Tank with Ball Valves and Two 120V Agitators 255250, Tank with One 120V Agitator [...]

Parts 32 312394V Polyethylene Tank Agitators Electric Agitator Assemblies 255246 and 255503 717 715 716 720 710 720 711 723 717 715 716 721 725 701 704 706 707 705 712 703 715 719 702 724 708 709 708 714 Assembly 255246 Shown Shown for reference only. 1 1 718 713 ti12456a[...]

Parts 312394V 33 † Part not shown. Ref Part Description Qty 701 01/2218/97 ENCLOSURE, agitator, electric, prmv/f, hd 1 703 01/2219/97 PLATE, adapter, electric agitator, hd, prm 1 704 81/2218-1/11 MOTOR, 50 rpm, 60 in-lb, 120V, 1.2A (assembly 255246 only) 1 256613 MOTOR, 50 rpm, 60 in-lb, 230V (assembly 255503 only) 1 705 81/1040/11 MODULE, ac, 2p[...]

Parts 34 312394V Pneumatic Agitator Assembly 255730 818 817 815 816 809 818 810 821 817 815 816 819 801 802 808 813 823 805 824 804, 811 807 806 814 822 Apply thread sealant tape to male npt threads prior to installation. Shown for reference only. 1 2 1 1 2 812 ti12457a[...]

Parts 312394V 35 Ref Part Description 801 82/0216/11 MOTOR, motor, pneumatic, agitator, 0.32 hp 1 802 94/0838/96 VALVE, needle, 1/8 npt x 1/8 npt, male / female 1 804 01/1189/98 ADAPTER, coupling, air motor, agitator 1 805 5-01-0510 SCREW, socket head cap, 10-32 x 5/8 in. 3 806 84/2215-A/11 COUPLING, alignment, 1 in. OD, hub, 3/8 in. ID 1 807 84/22[...]

Parts 36 312394V Agitator Shaft, 255724 907 904 903 905 901 902 901 906 905 ti12458a Ref Part Description Qty 901 01/2230-1/98 PADDLE, agitator, tfm tank, stainless steel 2 902 01/2230-2/98 SUPPORT, mount, paddle, agitator 1 903 96/0097/98 FASTENER, screw, socket head cap, 10-24 x 1.25, stainless steel 2 904 96/0125/98 FASTENER, screw, socket head [...]

Parts 312394V 37 On-Board Stainless Steel Tanks Tank Assemblies LC0237, LC0238, LC0254, and LC0255 Right hand tank shown, left hand tank is mirror image. 306 309 301 308 307 305 303 302 304 2 Use glass cloth tape to secure ground strap, thermal switch, and RTD to tank wall before adding heat blanket. Secure heat blanket to tank with string laced th[...]

Parts 38 312394V † Not shown. See Integrated Heat manual referenced at beginning of this manual. ▲ Replacement Danger and Warning labels, tags, and cards are available at no cost. Ref Part Description Qty 301 --- Refer to Tanks for Use with Dust Covers and Tanks for Use with Clampdown Covers , page 44, for replacement or spare parts. 1 302 LC08[...]

Parts 312394V 39 Tank Assemblies 255284, 255285, LC0235, LC0236, LC0012, and LC0013 † See Ball Valve, Assembly 255280 , page 40 for parts information. It is recommended that the flat face of the tank faces the back of the base machine. Right hand tank shown, left hand tank is mirror image. 503 506a 505 506c 503 504 507 501 502 Assembly 255284 Sho[...]

Parts 40 312394V Ball Valve, Assembly 255280 2204a 2204b 2204c 2202 2201 2204g 2204f 2204e 2204d 2204h 2204j 2205 2206 2203 ti12564a Ref Part Description Qty 2201 96/0075-1/99 WASHER, flat, sae, 7/16, mild steel, n series 1 2202 96/0075/99 WASHER, lock, split, 7/16, mild steel 1 2203 121012 SCREW, M8 x 1.25 65 mm, socket head cap screw, stainless s[...]

Parts 312394V 41 Flange Assembly, 256896 The flange assembly can be installed if no tanks or accumulators are installed. It allows for other feed sys- tem options to be installed onto the pump subassembly. * Part not shown. Ref Part Description Qty 2701 15M237 Flange, 1-1/2 in. npt 1 2702 * 95/0223/00 O-RING, fluoroelastomer, bbc 1 2703 * 120904 SC[...]

Parts 42 312394V On-Board Stainless Steel Tank Lids Lid Assemblies LC0019 to LC0026 and LC0130 to LC0132 CAUTION The electric agitators used with on-board tanks will fail pre- maturely when material viscosity exceeds 24,000 cps. Use pneumatic agitators if material viscosity exceeds 24,000 cps. 1018 1019 1020 1021 1023 1021 1024 1009 1008 1007 1025 [...]

Parts 312394V 43 † Part not shown. ‡ Spare clamps will be provided with all clamp-down lid assemblies. Ref Part Description Quantity LC0019, Lid assembly with Relief LC0020, Lid assembly LC0021, Lid assembly, 120 V Agitator LC0022, Lid assembly, 240 V Agitator LC0023, Lid assembly, Agitator, De-gas LC0024, Lid assembly, Agitator, De-gas LC0025,[...]

Parts 44 312394V Tanks for Use with Dust Covers Tanks for Use with Clampdown Covers Ball valve shutoff assemblies and mounting hard- ware must be ordered separately. LC0012 7.5 L stainless steel LC0235 7.5 L stainless steel with high level port LC0013 3 L stainless steel 24U714 7.5 L stainless steel with clamps 24U713 7.5 L stainless steel with hig[...]

Parts 312394V 45 Lid Assembly LC0018 1302 1304 1301 1303 Apply thread sealant tape to male npt threads prior to installation. 1 ti12461a Ref Part Description Qty 1301 15M956 LID, mod, 7.5L & 3L, stainless steel 1 1302 96/0127/98 FASTENER, socket head cap screw, 1/4-20 x 0.37, stainless steel 1 1303 96/0148/11 KNOB, 1/4-20, female, plastic 1 130[...]

Parts 46 312394V Off-Board Stainless Steel Tanks Tank Assemblies LC0054 and LC0055 † Parts can be purchased in Tank Kit 255389 which includes the tank body, a basic tank lid with clamps, and a tank lid gasket.  Parts can be purchased in Tank Kit 256633 which includes the tank body, a basic tank lid with clamps, and a tank lid gasket. 601 601 6[...]

Parts 312394V 47 Tank Assemblies LC0259 and LC0260 408 407 401 404 405 406 402 403 Use glass cloth tape to secure ground strap, thermal switch, and RTD to tank wall before adding heat blanket. Secure heat blanket to tank with string laced through eyelets. Insulation blanket should cover heat blanket completely. Secure insulation blanket to tank wit[...]

Parts 48 312394V † Not shown. See Integrated Heat manual referenced at the beginning of this manual. ▲ Replacement Danger and Warning labels, tags, and cards are available at no cost. Pipe and Tube System, 255391 Ref Part Description Qty 401 LC0054 TANK, assy, 30 L, stainless steel (assembly LC0259 only) 1 LC0055 TANK, assembly, 60 L, stainless[...]

Parts 312394V 49 Off-Board Stainless Steel Tank Lids Lid Assembly LC0101 Ref Part Description Qty 1101 111384 PLUG, pipe 2 1102 122767 BUSHING, 1/2 npt x 1/4 npt, stainless steel 2 1103 94/0736/96 VALVE, drain cock, 1/4 npt, male, brass 1 1104 15M578 LID, stainless steel 1 1105 15R145 VALVE, relief, 1/4 npt, male, 40 psi, sil 1 1105 1104 1103 1101 [...]

Parts 50 312394V Lid Assembly LC0102 Ref Part Description Qty 1201 187875 GAUGE, pressure, fluid 1 1202 122767 BUSHING, 1/2 npt x 1/4 npt, stainless steel 2 1203 15M861 FITTING, reducer, pipe, 3/4 x 1/4, stainless steel 1 1204 94/0736/96 VALVE, drain cock, 1/4 npt, male, brass 1 1205 257746 FITTING, vacuum tree 1 1206 15M578 LID 1 1207 15R145 VALVE[...]

Parts 312394V 51[...]

Parts 52 312394V Lid Assemblies LC0050, LC0144, LC0145, LC0146, LC0147 CAUTION The electric agitators used with off-board tanks will fail prematurely when material viscosity exceeds 48,000 cps. Use pneumatic agitators if material vis- cosity exceeds 48,000 cps. 1409 1401 1403 1407 1402 1410 1411 1406 1405 1408 1404 Apply thread sealant tape to male[...]

Parts 312394V 53  Previous versions of these lid assemblies include agitator 255670 but that agitator is no longer available. Agitator kit 24J182 is the replacement for 255670. Ref Part Description Quantity LC0050, 60 L, Agitator, Vacuum De-gas LC0144, Pneumatic Agitator, De-gas LC0145, Pneumatic Agitator, De-gas, 60 L LC0146, Pneumatic Agitator[...]

Parts 54 312394V Lid Assemblies LC0042, LC0043, LC0142, and LC0143 CAUTION The electric agitators used with off-board tanks will fail prematurely when material viscosity exceeds 48,000 cps. Use pneumatic agitators if material vis- cosity exceeds 48,000 cps. 1501 1505 1508 1506 1504 1503 1507 1506 1502 Apply thread sealant tape to male npt threads p[...]

Parts 312394V 55 † Part not shown.  Previous versions of these lid assemblies include agitator 255670 but that agitator is no longer available. Agitator kit 24J182 is the replacement for 255670. Ref Part Description Quantity LC0042 30 L Lid Assembly LC0043 30 L Lid Assembly with De-gas LC0142 30 L Lid Assembly with Pneumatic Agitator LC0143 60[...]

Parts 56 312394V Lid Assemblies LC0047, LC0048, LC0051, LC0052 CAUTION The electric agitators used with off-board tanks will fail prematurely when material viscosity exceeds 48,000 cps. Use pneumatic agitators if material vis- cosity exceeds 48,000 cps. 1608 Apply thread sealant tape to male npt threads prior to installation. 1 Assembly LC0051 Show[...]

Parts 312394V 57 Ref Part Description Quantity LC0047, LID, assy, 7.5 gal, agit LC0048, LID, assy, 15 gal, agit LC0051, LID, assy, 7.5 gal, agit, vac, fill LC0052, LID, assy, 15 gal, agit, vac, fill 1601 15M621 LID, agitator 1 1 1 1 1602 256822 MOTOR, assy, single phase, 50/60hz 1 1 1 1 1603 257608 BLADE, assy agitator, 75l 1 1 257607 BLADE, assy, [...]

Parts 58 312394V Vacuum Tree Manifold, 255342 Vacuum Tree Manifold, 257746 Ref Part Description Qty 2901 82/0220-1/11 GAUGE, 30 in. hg, 30 psi, liquid filled 1 2902 94/0900-R2/99 VALVE, ball, 2-way, 1/4 npt, female, 2K, mild steel 2 2903 121087 FITTING, tee, male-male-male, 1/4 in. NPT 1 2904 121088 FITTING, tee, male-male-female, 1/4 in. npt 1 290[...]

Parts 312394V 59[...]

Parts 60 312394V Stainless Steel Tank Agitators Electric Agitator Motor Assembly, 256822 1701q ti17646a 1701a 1701f 1701b 1701p 1701o 1701n 1701m 1701l 1701i 1701j 1701h 1701z 1701af 1701u 1701ag 1701j 1701g 1705 1707 1706 1701k 1701e, 1701t 1701c, 1701d 1701r, 1701s 1701z 1701x, 1701y, 1701aa 1701w, 1701ab, 1701ac, 1701ad, 1701ae, 1701v, 1702, 170[...]

Parts 312394V 61 ▲ Replacement Danger and Warning labels, tags, and cards are available at no cost. Ref Part Description Qty 1701 257605 HOUSING, agitator 1 . 1701a 124741 MOTOR, agitator 1 . 1701b 16K267 ADAPTER, plate, agitator motor 1 . 1701c 158223 WASHER 4 . 1701d 108803 SCREW, hex 4 . 1701e 100021 SCREW, cap 2 . 1701f 122775 NUT, eye, 1/4-2[...]

Parts 62 312394V Electric Agitator Motor, Assemblies 255337 and 255338 † Part not shown. 2509 2501 2513 2511 2505 2502 2506 2508 2507 2511 2512 2504 2503 Assembly 255337 Shown ti12584a Ref Part Description Qty 2501 01/1198-2/97 FASTENER, standoff, agitator, hd, elec, alu 4 2502 01/2218/97 ENCLOSURE, agitator, electric, prmv/f, hd 1 2504 01/2219/9[...]

Parts 312394V 63 Pneumatic Agitator Motor Assembly, 02/1116/50 2605 2604 2601 2602 2606 2603 ti12585a Ref Part Description Qty 2601 82/0216/11 MOTOR, pneumatic, agitator, 0.32 hp 1 2602 01/1189/98 ADAPTER, coupling, air motor, agitator 1 2603 01/1168/98 SHAFT, mount, pneumatic gear, agitator, stainless steel 3 2604 94/0838/96 VALVE, needle, 1/8 npt[...]

Parts 64 312394V Pneumatic Agitator Motor, 255670 NOTE: This agitator assembly is no longer available. Piece parts from the assembly can be ordered but if the entire assembly is needed then agitator kit 24J182 must be ordered. --- Not available for sale. Pneumatic Agitator Motor, 24J183 Ref Part Description Qty 1801 --- MOTOR, pneumatic, agitator, [...]

Parts 312394V 65 Agitator Blade Assemblies 257607 and 257608 1902 1901 Assembly 257607 Shown ti12468a 1901c 1901b 1901a 1901b 1901c 1901d ti12474a Ref Part Description Qty 1901 257604 BLADE, assy, electric agitator 2 1901a 15Y362 BLOCK, blade, coupler, 1 in. diameter 1 1901b 15Y361 BLADE, agitator 2 1901c 551903 FASTENER, socket head cap screw, 1/4[...]

Parts 66 312394V Level Sensors Polyethylene Tanks Level Sensors, Assembly LC0278 2001 2003 2002 ti12470b Ref Part Description Qty 2001 123549 SENSOR, level, quick disconnect 2 2002 121686 CABLE, M8 x M8, 4P, female / male, straight/right angle, 2 m 2 2003 96/1000/99 FASTENER, screw, socket head cap, M3 x 8, mild steel 4[...]

Parts 312394V 67 Stainless Steel Tanks Level Sensors 2102 2101 2103 2104 ti12469a Sensor Package Description Reference Number, Description, Quantity 2101 2102 2103 2104 121511 Level Sensor 01/0025-EF/87 Level Sensor Well 15U978 Sensor Well Cap 121684 CABLE, 2 m 121694 CABLE, 3 m LC0279 Low level sensor for two 7.5 L tanks 22 22 LC0280 Low level sen[...]

Kits 68 312394V Kits Mixer and Shroud Options MD2 Valve Kits Machine Rebuild Kits Tank Accessories † Item includes only the pump. A vacuum kit must be pur- chased to install the pump onto the tank.  Kit includes all parts needed to connect a nitrogen tank to the material tank. Part Description LC0063 Mixer, 3/16 in. (6.5 mm) x 32, 10 Mixers wi[...]

Kits 312394V 69 Vacuum Kits These vacuum kits contain the parts necessary to attach a vacuum pump to the tanks. Refill Kits Refill Kits 256659 and 256660 are designed to turn on and off a transfer pump as needed to keep the tanks at the proper fluid level. Tank Refill Kit 256577 is designed to open and close a valve to allow fluid to flow into the [...]

Dimensions 70 312394V Dimensions Machine with On-Board Tanks PR70 PR70v † Assembly dimensions listed are maximum for all assemblies under the given title.  On-board stainless steel tank dimensions include ball valves and vacuum de-gas in maximum height calculation. B A C D ti12621b ti12622b Ref † Assembly Dimensions, in. (mm) Polyethylene Ta[...]

Dimensions 312394V 71 Machine with Off-Board Tanks PR70 PR70v † Assembly dimensions listed are maximum for all assemblies under the given title. C B A D ti12623c ti12624c Ref † Assembly Dimensions, in. (mm) 30 L Tank 60 L Tank No Agitators With Agitators No Agitators With Agitators A 55.7 (1415) 83.4 (2118) 64.9 (1648) 89.5 (2273) B 32.1 (815) [...]

[...]

Technical Data 312394V 73 Technical Data Metering Pump Effective Area ..................... 80 to 960 mm 2 (0.124 to 1.49 in. 2 ) per side Small Air Cylinder Effective Area ................... 4560 mm 2 (7.07 in. 2 ) Large Air Cylinder Effective Area .................. 10260 mm 2 (15.9 in. 2 ) Maximum Stroke Length ......................... 38.1 mm[...]

Graco Standard Warranty 74 312394V Graco Standard Warranty Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty published [...]