Haier DWE-3120A manuale d’uso

User's manual DWE-3120A Computerized Full-auto Washing Machine Contents Before using Using Process Packing list ................................................17 Specification table The back cover Names of the parts..........................The 2nd cover Safety precautions...............................................1 Ins T allation and adj[...]

Contents marked with that symbol are related to the safety of the product and the personal safety of the users. Please operate in strict conformity to the contents, otherwise it may result in damage of the machine or influence the personal safety of the users. Contents marked with that symbol are actions forbidden to perform. Performing of those ac[...]

The ventilation holes at the bottom Soft object Before Using Before Using Safety precautions Do not put the machine at damp place like the bathroom. Never wash it with water. In case the washing machine is installed on ground with carpet, do not block the ventilation hole with carpet. Do not let the machine share one receptacle with other electric [...]

Do not stretch hands into the working machine. It is dangerous even if the rotation is slow. Take special care of the children. Do not decompose, repair or alter the machine by yourself. Do not put any hot or heavy items (such as the kettle with hot water) on the washing machine Do not wash laundries with volatile materials (such as thinner, petrol[...]

Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Before Using Before Using Installa tion and adjustment Install the lint filter After opening the package, please take out the lint filter from the document bag and install it into the Filter fram[...]

Before Using Before Using 1. The height of the drain hose shall be less than 10cm, or the drainage will not be smooth, and cost such long time that the machine may stop at mid way. 2. Do not ramp or press the drain hose. 3. If the drain hose is too long, cut it at mid point. T o make smooth drainage, cut the front end of the hose slantingly. 4. If [...]

The exit end face of the faucet Confirm the water faucet Connection between the water inlet hose jointer and the water faucet water faucet, suitable water fauce t, not suitable It is required that the front end shall be longer than 10mm. The exit end face of the faucet shall be flat and smooth. If not please file it to avoid leakage. 2 Loosen the s[...]

Connection between the water inlet hose and the washer Dismantle the water inlet hose Connection between the jointer of the water inlet hose and the water inlet hose Check the connection between the jointer of the water inlet hose and the water faucet 1. Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged[...]

Using process Using process 1 Pr epar a tion before washing Pay attention to followings before washing the laundries Preparation before washing 1. Connect the water inlet hose. Open the water faucet. 2. Confirm that the washing machine is earthed reliably. Then insert the power plug into the receptacle. The earth terminal shall not link to gas pipe[...]

Reference weight of the laundries: working suit up,down jeans about 800g The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinning in one time. One time washing quantity shall be lower than the rated capacity . The largest capacity of this machine is [...]

How to use the whitener First turn the detergent box down before adding detergent. How to use the washing powder Direct dissolved in the machine(not applicable for fuzzy and reserve programs) 1.Fill small quantity of water. 2.Add the power. Run for 30 seconds to dissolve it completely. 3.Put in the laundries. Select suitable water level. 3 Usage of[...]

Description of the function of the knobs and buttons 4 Use the oper a tion knobsand buttons Using process Using process Mode and meaning of the VFD indicator the frame of the indicator is flashing : indicate the running program. the frame of the indicator is on : indicate the program about to run, or indicate the selected mode the frame of the indi[...]

Using process Using process POWER ON/OFF button Push the "On/Off" button to switch on the power. When the power is on, push it again to switch off the power. After the power is switched on , if the washing machine is idle for 10 minutes, it will switch off the power automatically. one or more one programs among soak wash rinse spin can be[...]

PROGRAM PROCESS POWER ON/OFF Push the POWER ON/OFF button to switch on the power. Push the PROGRAM button to select the suitable automatic program. Steps of using the oper ation buttons and description of the steps Using process Using process After switching on the power, the machine will set to standard program automatically . T o select other pro[...]

Using process Using process Selection method of the procedure programs Times of pushing the PROCESS button Selected procedure program Applicable procedure Contents (the lighted indicators indicate the programs about to run) Wash, rinse, spin (standard program) Wash (the washing liquid remains in the tub) Wash (the rinsing liquid remains in the tub)[...]

Push the RESERVE button to select the suitable reserve program Push the START/P AUSE button 5 close the lid 6 finish washing 16 hours later, finish wash After Finishing wash alarm automatically Confirm the reserve program Excluding during soak, wash, filling water procerdure,If you open the top lid, the machine will stop working and alarm before sp[...]

Clean The filter screen of the water inlet valve is likely to be blocked by foreign materials and influence the water inlet. Please clean it with brush every two months. Using process Using process Disposal after washing After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using t[...]

After the reserve is started, it rings and the digital tube displays E0 The safety switch acts. The spinning can not work (after twice revising) The digital tube shows E3 and it rings. It does not do water inlet or the speed is slow ( the water level is not reached after15 minutes). The digital tube displays E4 and it rings. The draining does not w[...]

Packing list Computerized Automatic washing machine Components of the water inlet hose One Lint filter[...]

Specification Model HWM120-01 Rated voltage frequency 220V ~ 50Hz Rated washing / spinning capacity 12.0kg Water level/Water quantity (about) 1/29L 2/35L 3/41L 4/47L 5/53L 6/59L 7/65L 8/71L 9/77L 10/83L 11/89L 12/96L Max water consumption About 280L (Highest water level; Standard program) Water Injection pressure 0.03MPa~0.78MPa Rated washing input[...]