Haier HWM75-276S manuale d’uso

T win-tub W ashing Machine with Pump User's manual This manual is for HWM75-276S Please read this manual carefully before using. Retain it for future reference. 0030806004E[...]

Contents Safety precautions Installation and adjustment Preparation before washing The musts in washing Usage of the detergent Washing sequence Disposal after washing Packing list *Specification Names of the parts Trouble-Shooting *Answer to question[...]

1 Meaning and description of the symbols Warning sign Forbidding sign Contents marked with that symbol are related to the safety of the product and the personal safety of the users. Please operate in strict conformity to the contents, otherwise it may cause damage of the machine or injure the personal safety of the user . Contents marked with that [...]

Safety precautions Please insert the power cord into special receptacle with rated vol- tage.Be sure to use single-phase three pins receptacle.The earthing terminal of the receptacle must be earthed reliably.If poss ible,please adopt electric leakage protector. When the machine is normally using, please put the power plug at the location easily to [...]

Do not stretch hands into the working machine. It is dangerous even if the rotation is slow. T ake special care of the children. Safety precautions Do not put any hot or heavy items ( such as the kettle with hot water ) on the washing machine. Do not decompose, repair or alter the machine by yourself. Handicapped or children without care shall not [...]

Installa tion and adjustment Usage of the drain hose Install the water inlet hose; Select the water level Adjust the water level adjusting lever to desired water level line. (about 46L) Maximum Max. (about 55L) Minimum Min. (about 36L) Medium Med. Water inlet hose Water-filling entrance Water level adjusting lever Insert the water inlet hose into t[...]

How to change the direction of the drain hoses Figure 1 indicates the ex factory installation position of the drain hose. Then hang the drain hose into the hanging hole at the spin tub side. (As per Figure 5 ). Extend the drain hose from the side of spin tub. Extend the drain hose from the rear side Take out the drain hose from the fixing hook. Ext[...]

Preparation before washing 1.Connect the water inlet hose. 2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Put the drain hose up to suitable position. 4.Slanting or uneven ground may result in unstable working or abnormal[...]

The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinned in one time. Laundries quantity in one washing cycle shall be lower than the rated capacity. The thickness ,size , type of the cloth will influ- ence the actual washing capacity. It is suit- abl[...]

Washing sequence Figure 1 Figure 2 Spin timer SPIN WASH Wash timer Wash selector Buzzer Water-filling entrance (T o set to below 2 minute, first set to 5 minute then turn it back. it can increase the service life of the timer). (standard current, gentle current) (The buzzer will ring when the washing finishes) (to set to below 1 minute, first set t[...]

Midway spinning Push Push Proper Proper Outer cover of The spin tub Inner cover of The spin tub The laundries are slanting Gland No gland (1) Open the outer cover of the spin tub. (2) Set the water-filling selector control rod at the "SPIN" side. Fill water for about 1 minute. If the water quantity filled is too large, the water may flow [...]

Rinse with stored water Rinse with water-filing 1. Put the laundries into the wash tub. Select suitable current according to the laundries. 2. Fill water to preset water level. 3. Rinse Adjust the wash timer to 2-3 minutes to do rinsing. When the laundries quantity is below 2.4kg, please use "Gentle" current. If you use "Standard&quo[...]

1. Put the laundries into the spin tub evenly and smoothly. 2. Press the gland in the tub properly. Close the inner and outer cover of the spin tub. 3. Spin Select suitable spin time according to the laundries, and do spinning. During spinning, if there's abnormal sound, it is generally owing to slanting placement of the laundries. Please stop[...]

After using, please clean the lint and foreign materials of the lint filter and overflow filter in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. 1 T ake off the overflow filter. As indicated in the figure, nip the elastic fixing claw and pull it to the direction of[...]

Wipe the complete unit with soft cloth twisted dry. Wipe with neutral detergent if too dirty Do not wash it directly by water Cleaning the overflow filter 2. T ake off the corrugation pipe. Dismantle the upper part of the corrugation pipe inside the overflow filter ( as indicated in Figure 1). 3. Cleaning the overflow filter Clean the lint around t[...]

T ro uble-shooting Ans wer to question When the remained water is frozen Prevent the freezing (be sure to discharge the water completely after using) After complete draining, set the "WASH SELECTOR" at "GENTLE" or "STANDARD". If it is set at "DRAIN", it will be rather difficult for the frozen water to melt. W[...]

T ro uble-shooting Ans wer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do[...]

W ater inlet hose Gland Lint filter Packing list Twin-tub washing machine Name Quantity User's manual One piece One piece One piece One piece One set W ater level/Water quantity (about) Maximum/55L Medium/46L Minimum/36L Injection pressure(MPa ) Specification Rated spinning capacity(kg) 7.2 0.02~0.2 Rated washing capacity(kg) 6.8 16[...]