Haier HWMP55-918 manuale d’uso

Fully Automatic W ashing Machine User manual This manual is for HWMP55-918 Please read this manual carefully before using. Retain it for future reference.[...]

CONTENTS CONTENTS I Parts 1 Safety precautions 2 Installation and adjustment 4 Install the drain hose 5 Install the water inlet hose 6 Preparation before washing 7 Detergent peration 9 13 14 T rouble-shooting 15 Packing list 17 Specification nside cover Load the laundry 8 Cycle completed Maintenance Back page 8 O[...]

Drain connector Control pannel Inner tub Detergent box T op lid Balance ring Lint filter Pulsater Front control board Cabinet Adjustable leg Fixed leg (2 pieces) Instruction for adjustable leg Back cover 1 Pa r ts Contents marked with this symbol are related to the safety of the product and the personal safety of the users. Please operate in strict[...]

Saf ety prec autions The ventilation holes at the bottom Soft object Back Front A separate earthed socket is required for the power supply.Hold the plug not the electric cable when unplugging the washing machine. Do not insert or remove the power plug with wet hands. After installation of the washing machine, the power plug should be accessible. En[...]

Safety precautions 3[...]

Install the bottom plate 4 Please install and adjust the machine according to the requirement of the manual. It is very important to your operating the machine. safety and the correct Installatio n and adjustment The largest allowable slope of the base of the machine is 2 . Slanting or rough ground will result in unstable running or stoppage of the[...]

5 Install the dra in hose Install the drain hose First install the drain hose hook on the part of outer drain hose component. Put the drain hose clamp on the outer drain hose, Insert the outer drain hose into the joint for it, and then clutch tightly with drain hose hoop. Drain hose neck Drain hose joint Drain hose hoop 4 . Usage of the drain hose [...]

6 Install the water inlet hose 1. Insert a new flat washer into each end of the inlet hose. Firmly put the washers in the coupling. 2. Connect the water inlet hose to the water faucet. Use the new hose supplied with the washer. Any other old hoses should not be used. You may have to use pliers to tighten the coupling. Do not overtighten because you[...]

7 1.Pr eparation bef or e washing Preparation before washing Preparation before washing 1. Connect the water inlet hose. 2. Inset the power plug into the electrical socket. 3. Ensure the drain hose is mounted at the correct height. 4. Select a suitable location for the washer on a hard, even surface away from direct sunlight or heat sources, e.g. r[...]

2. Load the laundry The rated washing capacity refers to the largest dry weight of a load that can be washed. The thickness, size and type of clothes will influence the actual capacity. Be care ful to only load a reasonable amount of laundry. Do not select more than 4 water level for clothes less than 1.0kg, to avoid splashing of water It is sugges[...]

5 Operation 9 A B C D E F G B START/P AUSE button C Temp(W ash/Rinse button Long Medium Rapid Express During quick cycle, the water temperature can't be chosen. T emp button does not work During wool cycle, the "hot/cold" water temperature can't be chosen. Indicator display On Indicates the program is about to run and indicates [...]

D Water Level button During the Memory and Synthetic programs the washing machine will detect the size of the laundry and automatically select the water level between levels 4, 6, 8 or 10. To change the water level, press the Start/Pause button and make your selection. Press the Start/Pause button to start the machine, it will not set the water lev[...]

12 11 G Cycle button Operation buttons and descriptions 1 2 Cycle Recommended for Washing the Mixed fabrics laundry Normal Program Heavy Items that are very dirty or items that are heavy or big Delicate Delicate items that are machine washable Small load of lightly soiled laundry less then 1.5kg Quick The customer favourable cycle, it can remember [...]

12 3 Wash Rinse Spin For the "Synthetic"and "Memory" cycles the machine will run the Fuzzy Logic program automatically detecting the type of laundry in the tub. After detection it will set the water level automatically. The water level can only be changed once the machine has started, push the "Start/Pause" button, the[...]

Ãê 7 Press the button to start the cycle and an alarm will sound. ˜Ñ Cycle completed an alarm will sound. Note The energy test program was performed using the "Normal" cycle default setting of: wash long , 1 rinse, spin 7 mins, water level 10. Please use low sudsing or high efficiency detergent. 13[...]

Clean Remove and clean the detergent box, replace after cleaning. The lint filter must be used during washing. It must be cleaned after each use Lint filter: 1.Pull it up to remove it. 2.Push it down to install. 3.Clean the filter screen after each wash. remove Install Dismantle Install The filter screen of the water inlet valve may become to be bl[...]

15 T r ouble-shooting If there is a breakdown, remove the power plug before checking the machine. Using the following list please confirm the machine requires repair. If repair is required please contact our Customer Care T eam, do not try to fix it yourself. The machine does not spin. The display shows E3. The display will show E4 within 30 m inut[...]

There maybe water in the drain hose in when first used. It is the water after the performance inspection by the factory . remaining Common occurrences Situation Cause The spinning is intermittent when it starts. The wash procedure pauses. Select spin program, but it does not work. Redistribute the load evenly . Close the top lid. The cloth sensor i[...]

Packing list Lint filter Automatic washing machine Between the upper cushion of the washing machine package and the upper seal of the package carton. Bottom plate One Inside the accessory bag Eight T apping screws Tw o Inside the accessory bag Inside the document bag One One Components of the water inlet hose User manual Inside the document bag One[...]

Specifica tion Model Rated voltage/frequency Rated washing power Rated spinning power Weight Dimensions (mm) HWMP55-918 220-240V 50Hz 380W 300W About 35kg L 520 W 530 H 900 Water inlet pressure 0.03MPa-1.0MPa (when water temperature is 70 , the water inlet pressure of hot water shall not exceed 0.4MPa) Type Fully Automatic Washing Machine Water lev[...]