Haier L32A9-AKF manuale d’uso

Please read this manual carefully before operating t he unit, and keep it for futu re reference. TFT -LCD COL OUR TELEVISION RECEIVER OWNER'S MANUAL This User's Manual is applicable for the following models: + L32A9-AK,L32A9-AK,L32A9 -AK,L32A9-AKF[...]

Congratulations on your purchase, and welcome to the family ! Dear Haier product owner: Thank you for your confidence in Haier. You`ve selected one of the best-built, best-backed products available today. We`ll do everything in our power to keep you happy with your purchase for many years to come. As a member of the Haier family, you`re entitled to[...]

CONTENT BEFORE OPERA TING W arning.................................................................................................................1 Important Safety Instructions.................. ..............................................................2 Buttons and interface location...........................................................[...]

W ARNING *To avoid electric hazards, it is strongly suggested that the back cover not be opened, as there is no any accessory inside the casing. *If necessary, please contact authorized after-sales services. *A lighting flash mark in a triangle: A potentially hazardous situation, which, if not avoided, could result in serious injury by high voltage[...]

Important Safety Instructions The product should be tightly fixed to avoid drop damages and even fire. To avoid fire hazards, do not use this product under direct sunlight or closely to heat sources. Do not locate the product close to water or oil, which may cause fire hazards. Unplug the power supply and antenna of the product when there is a rain[...]

[...]

Front panel Control Buttons and functions - This is a simplified representation of front panel. - Here shown may be somewhat different from your TV . Buttons and interface location 4 - CH + - VOL + TV/A V MENU POWER 1 CH-/+ : 2 VOL-/+ : 3 TV/AV : :TV-VIDEO-SIDE VIDEO-S VIDEO-YUV- USB-VGA-DVI 4 MENU: 5 6 POWER : AC power on/off 7 8 Multi-media input[...]

Buttons and interface location Rear panel Control 5 VIDEO L AUDIO R USB Socket AUDIO Input connect to hear stereo sound from an external device . VIDEO Input Connects the video signal from a video device. DVI Input Connect the monitor output connector from a PC to the appropriate input port. Antenna Input Connect cable or antenna signals to the TV,[...]

Remote controller Precautions Battery loading 1.Slide open the cover of the battery compartment on the back of the remote controller. 2.Load two 7# (AAA)alkaline batteries in the compartment. (plus and minus poles to respective mark) 3.Replace the cover of the battery compartment. Make sure that there is no obstacle between the remote controller an[...]

Remote controller key function 7 The remote controller cannot be operated unless the batteries are properly loaded. Note: The function just takes the remote control for example in this manual P+/-(CH+/-),V+/-(VOL+/-),MENU,TV/AV and POWER on TV panel are corresponding with the CH+/-,VOL+/-,MENU,TV/AV and POWER keys. DISPLA Y POWER MUTE STILL I/II PI[...]

DISPLAY POWER MUTE STILL I/II PIC.SIZE TV/AV S-VIDEO DVD/DTV PC/DVI OK Q.VIEW CH+ CH- VOL- VOL+ MENU PSM 12 3 4 5 6 78 9 -/-- 0 ZOOM/MOVE USB PIP SWAP SCAN CH.EDIT SHUTTLE SLEEP H.LOCK TIME.SKIP ZOOM RETURN S SM HELP ENTER 8 above below 20 20 left right front 8m 45 45 Ensure the remote controller is pointed toward the remote controller windows on t[...]

ANT IN External Equipment Connections Note * It is recommended that you'd better use 75 * Don't bind antenna cable and electric wire together. coaxial cable to remove the disturbance caused by airwave. outdoor antenna 300 twin-lead cable Antenna adapter 75 coaxial cable Plug (additional purchase) Antenna input 75 standard coaxial type - A[...]

DVI-DTV OUTPUT R AUDEO L RGB-DTV OUTPUT R AUDEO L YP bP r R AUDEO AUDIO AUDIO DVI IN AUDIO VGA IN VGA Pr/Cr Pb/Cb Y LR AUDIO AUDIO S-VIDEO Pr/Cr Pb/Cb Y LR VIDEO LR DVD setup How to connect 1 . Connect the DVD video outputs (Y, Pb/Cb, Pr/Cr) to the COMPONENT (Y, Pb/Cb, Pr/Cr) INPUT jacks on the TV and connect the DVD audio outputs to the AUDIO INPU[...]

AUDIO DVI IN AUDIO VGA IN VGA PC setup How to connect 1. Use the TV`s VGA IN or DVI (Digital Visual Interface) IN port for video connections, depending on your PC connector. If the graphic card on the PC does not output analog and digital RGB simultaneously, connect only one of either VGA IN or DVI INPUT to display the PC on the TV . If the graphic[...]

External Equipment Connections Connect Woofer 1. T ake the woofer out, and place it the hind rind. (See pictu re) 2. Connect cable to the woofer terminal and LCD TV terminal, and insert the connecting cable into the terminal slot. 12[...]

Power source TO USE AC POWER SOURCE Use the AC polarized line cord provided for operation on AC. Insert the AC cord plug into a standard polarized AC outlet. NOTES: Never connect the AC line cord plug to other than the specified voltage. Use the attached power cord only . If the polarized AC cord does not fit into a non- polarized AC outlet, do not[...]

Power ON/OFF Indicator Remote receiving window Switching ON/OFF the TV set In the manual, the OSD (on screen display) may be different from your TV`s because it is just an example to help you with the TV operation. Switching ON/OFF the TV set 1 Please press down the power switch to switch on AC power supply and the power indicator will light . 2 If[...]

Choose the input source Press TV/AV button on remote controller, the menu appears on the screen. Then press CH+/- to select the TV item, and press VOL+/- to ensure it. Source Select input modes If you hope to enjoy the picture from the external input source, before to select the source, you need to connect the devices, otherwise, when you select th[...]

OK Q.VIEW CH+ CH- VOL- VOL+ MENU PSM S SM This T V set has three methods to set channels, which are respectively full automatic, manual search fine tune. In this section, how to use the remote control to set channel is explained. Y ou can also use buttons on the TV set to set channel. Full automatic search mode Automatic search 1 Press the MENU but[...]

OK Q.VIEW CH+ CH- VOL- VOL+ MENU PSM S SM Manual search Manual search 1 Press the CH+/- buttons or the PROGRAM NUMBER 0-9 button to choose desired channels regard channel 1 as example 2 Press the MENU button and VOL+/- button, till the TUN. menu shown on the right display on the screen. 3 buttons to select " Manual Search " item. Press th[...]

12 3 4 5 6 78 9 0 TV/A V S-VIDEO DVD/DTV PC/DVI Watching TV Program You can watch T V program in a presetting channel. Watching TV program How to select the desired program 1 Using "Program number" buttons. Directly enter the channel number with the numeric keypad on the remote control. If to select channel numbers of double-digit or thre[...]

OK Q.VIEW CH+ CH- VOL- VOL+ MENU PSM S SM If the color of some channel is abnormal Usually this should be set in the auto position. However if the color displayed on the screen are incorrect, you can manually select the correct color system. Press the menu and VOL+/- button, till the picture menu shown on the right will display on the screen. Press[...]

OK Q.VIEW CH+ CH- VOL- VOL+ MENU PSM S SM OK Q.VIEW CH+ CH- VOL- VOL+ MENU PSM S SM Watching TV Program continued Watching TV program Quick program view 1 Suppose the channel number you used just now is 8 and the channel number you are using is 18 (as shown in the figure). If you want to return to the last watched program channel 8, you can simply [...]

Multiple picture modes Picture Control Functions How to customize your own picture status Brightness Contrast Sharpness Chroma Hue (only in NTSC mode) BackLight Dark Weak Soft Shallow More purple Green Bright Strong Sharp Deep More green Red ITEM Press VOL- Press VOL+ How to select picture modes You can quickly select the desired picture mode from [...]

DNR( Digital Noise Reduction) 1 Afte r cal ling up th e Picture me nu, p ress CH+/- button to s elect item. "DNR" 2 Press VOL+ to e nter the list. Select Auto, Off , Weak according to the image noise. , Me dium or Strong 3 Press MENU return to the picture menu. Automatically filters out and reduces the image noise and improves picture qua[...]

OK Q.VIEW CH+ CH- VOL- VOL+ MENU PSM S SM Multiple sound modes How to choose sound mode How to customize your own sound quality Press the SSM button to select the desired sound quality. Four kinds of sound modes (i.e., Personal ,and Music ) can be selected in turn. Standard , Theater , 1 Press MENU button and VOL+/- button , till the SOU. menu show[...]

This will adjust the output of the right and left speakers to obtain the best stereo reproduction for your listening position. The intermediate value is 0. When indication value of Balance increases toward+50, sound of the right and left speaker becomes stronger and weaker, respectively . When indication value of Balance decreases toward -50, sound[...]

MUTE Mute Mute When you need to pay attention to surrounded sounds, or there is a telephone calling you or there are some guests visiting you, the sound elimination (mute) function is very convenient. How to eliminate sound 1 Press the MUTE button on the remote control and "MUTE" type face will display on the lower part of the screen. At [...]

Time Functions On/off timer Clock setting Clock setting and timer on/off functions 1 Press button and VOL+/- button, and the TIME menu display on the Screen. MENU 2 Press CH+/- buttons select " Clock ",press VOL -/+ buttons to select hour or minute position, then press the digital buttons to set the value of hour or minute; 1 Press CH+/- [...]

Time Functions How to use the remind time and program Remind Time and Remind Program setting 1 Press button to call up the TIME menu on the screen. MENU and VOL+/- 2 Press CH+/- buttons to select " Remind Time ", then press VOL -/+ buttons to select hour or minute position; then press the digital to set the value of hour or minute.(take 1[...]

Language English Menu Timeout 15seconds Menu Background Translucent BlueScreen Off Calendar 3A Optimize Off Time Skip 0 Min B C A Function menu Menu Timeout Repeat step 2 and 3 to set the menu out time. Each Press of VOL+/- button repeatedly to select the number of preset minutes, the time will be set in sequence: 5seconds, 10seconds, 15seconds, 20[...]

Display Mode Normal Color Tem perature Normal Black S tretch On Adjust RGB Default Auto Sync. B C A Adjust menu 1 . Press MENU and VOL+/- button to enter the ADJ. menu. 2 . Press CH+/- to select desired item. 3 . Press VOL+/- button to adjust the values level. 4 . Press menu to exit. Display Mode You can also press PIC.SIZE button on remote control[...]

PC setting Press PV/DVI button to select PC or DVI mode. PC setting 30 Adjust menu In VGA and DVI input mode, H-Position and V-Position can be adjusted to eliminate transverse line interference and decentered picture. Display Mode Normal Color Tem perature Normal Black S tretch On Adjust RGB Default Auto Sync . B C A Only be adjustable in the VGA/D[...]

In VGA and DVI input mode, H-Position and V -Position can be adjusted to eliminate transverse line interference. PC setting 1 2 Press Press CH+/- buttons to select RGB , then press VOL- /+ buttons to enter the sub menu. CH+/- buttons to select the desired item, press VOL+/- button to adjust. 31 NOTE As the frequency of display differ in PC device y[...]

Press H.LOCK button, Password will appear on the screen. The initial password of the television is 0000 and security default password is 9443. then enter Lock Set menu.(as follow) Note: If the password is not correctly entered, you will be required to reenter the password and the cursor will stay at the first place. Press EXIT to cancel the window.[...]

Prog. Num Prog Num is opted for setting up preset channel. Press CH+/- button to select Prog Num. Press VOL /- button, to select channel number.(The item is not available except TV signal.) Source Lock Source Lock is opted to hinder external input modes, such as AV , Scart and VGA. Press CH+/- button to select the option, and press VOL+/- button to[...]

Max Volume Press CH+/- button to select Max Volume. Press VOL+/- button for adjustment between 0 100. If a certain value is set, when volume is being adjusted, the sound value can not exceed maximum volume value. If current volume is over Max V olume, when Lock Set menu is set, current volume will become set maximum volume. If current volume is bel[...]

Others functions Nicam Sleep display functions Display function Press the DISPLAY button, then the channel number and system will be displayed on the screen. Press again, it is disappear. the DISPLAY button DISPLAY Press the I/II button will result in fast swap of NICAM function of current program. NICAM 35 3 AUTO B/G Sleep The TV set will switch a[...]

Scan 1 If you want to select a desirable program, you may scan all the TV programs in memory. You can simply press Scan button to do this. Press scan button once, there are nice pictures on the screen, press Scan button again, there are sixteen pictures on the screen to scan. 2 If you want to stop the function during auto tunning, simply press Scan[...]

Stream media play prepare Stream media broadcast system 37 1 . Supporting equipment 1.Equipment supporting Mass and Storage agreements include USB, mobile hard disk, card reader, some MP3 and digital camera. 2.Equipment supporting PTP agreement includes some digital camera. 2 . 1 Supporting media : picture, music, MPEG4, MPEG2 and MPEG1; Supporting[...]

Stream media broadcast system 38 Stream media system setup Note : Memory cards or USB devices are not supplied with this TV. USB setup 1 Insert USB in the card slots at the left side the TV. 2 Insert it to be clicked in. 3 Press USB button on the remote controller to enter the stream media system. CARD setup SETUP File Copy USB2 Remove USB1 Press E[...]

Stream media broadcast system 39 Removing USB device 1 press RETURN button to exit menu. 3 Remove the memory card/USB device. 4 If to remove the card device, press RETURN button to return to the main menu, and remove the card. Press up or down to select Remove USB, and press ENTER button to ensure it. 2 Card data protection - Do not remove the card[...]

Stream media broadcast system 40 1. Press up or down to select the item with up or down. 2 Press or to select the desired item of submenu with left or right. 3 Press ENTER button to ensure the desired option to enter the submenu to resume the speed of standard. 4. Press or button to operate play quickly or slowly. 5.Press pause button to make the p[...]

To select stream media broadcast system Stream media broadcast system 41 1. Press up or down button to select Picture item. 2. Press ENTER button to enter the menu of play. 3. Press again up or down button to select desired enjoy picture, and then press ENTER button to enter the play menu. 4. On screen display, Press or to select the speed of play.[...]

To enjoy music Stream media broadcast system 42 1. Press up or down button to select "Music" option. 2. Press ENTER button to enter play menu. 3. Press up or down button to select desired music, and then press ENTER button to play music. Note: The play file menu are different with your USB device. 4. When playing music, press up or down t[...]

To play Movie Stream media broadcast system 43 1. Press up or down button to select "Movie" option. 2. Press ENTER to enter play menu. 3. Press again up or down button to select desired movie, and press again ENTER button to play it. 4. On screen display, press or button to select in turn: File -PlayBack Control-Audio channel-Play Mode 5.[...]

To select the Music and PIC item Stream media broadcast system 44 1. Press up or down button to select "Music and Pic" option, and press ENTER button to enter menu. 2. Press up or down to select desired file, and press button to ensure it. ( to cancel). Repeat step 2 to select more file, and press ENTER button to enter play menu. 3. On sc[...]

Copy file function Stream media broadcast system 45 1. Press up or down to select "File Copy" item. 2. Press ENTER button to enter the copy menu. 3. Press ENTER button to enter the file menu, and press up or down button to select "Card" or "USB" 4. Press ENTER button to enter Card or USB, and select the files to copy, [...]

To select language 1 . Repeat steps 1-2, and then press or to select version. 2 . Press ENTER button to display the version number . To display the version Languages Version V2.1.04250 1 . Press or to select "SETUP " item. 2 . Press ENTER button to enter the SETUP menu, 3 .and press again ENTER button to enter language option. 4 . Press o[...]

Specifications and functions Picture proportions 4:3/wide screen: (3 modes) Panorama picture: 16:9 Picture element: Multi-input compatibility Advanced technology for motion picture processing Two s peakers/optional Complex component: RCA-pin 3 Component video signal: YUV 1 S terminal: Mini DIN 4-pin 1 RGB input: D-sub 15-pin 1 (480i/p, 720p, 1080i,[...]

To remove dirt or dust , wipe the cabinet with a soft, dry , lint-free cloth. Please be sure not to use a wet cloth . Maintenance Cleaning the Screen - Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin an[...]

Troubleshooting For the sake of time and cost, it is strongly recommended that you check out the problem by yourself according to the instructions listed hereunder before contacting the after-sales service for technical assistance. Note : Production of the screen requires high and precision technologies. However, there might be some dark or bright [...]

01 0090506321A[...]