HANNspree DT04-12A1 manuale d’uso

[...]

Table of Contents 1 1. Warranty and Service .................................................... 3 2. Preface .................................................................... ..... 4 3. Description of Warning Symbols ................. .................... 5 4. Safety Notices .......................................................... ..... 6 5. [...]

Table of Contents 2 11. Adjusting On-Screen Display (OSD) Settings ............... 2 8 Brightness ............................................................... 2 9 Contrast ............................................................... ... 3 0 Video Setting ........................................................... 3 1 Hue .....................[...]

3 The instructions on this manual are for the model(s) listed on the front cover . Befor e you start reading, check your product number by lookin g at the rear of your TV . Thank you for purchasing our Liquid Crystal Display T elevision (LCD TV). With this product, you will be able to enjoy superior audio and video while enriching your lifes tyle w[...]

4 This manual is designed to assist use rs in setting up and using t he LCD TV . Information in this document ha s been carefully checked for accuracy; however , no guarantee is given to the corr ectness of the content s. The informatio n in this document is sub ject to change without notice. Copyright © Copyright 2003 Hannspree, Inc. All rights r[...]

5 Electric Power Notice Electric power may cause personal inju ry and mechanical damage if it is misused. Although safety has been tak en into conside ration during the design and production of this product, electric shock or fire can result when the product is misused. T o prevent potential danger , follow the instructions below when installing, o[...]

6 Power Supply Safety Notes 1. T o avoid electric shocks, do not use an extended power cord or an outlet that does not match this pr oduct's plug or leaves the plug exposed. 2. This product has a 3-pin gro unded plug. The th ird pin connects to ground; do not r emove it. 3. If the power cord or plug is damaged or worn, unplug it immedi- ately [...]

7 Before Y ou Proceed 1. Read the Safety Notices and the User ’s Manual carefully before turning the pro duct on. 2. Keep your User ’s Manual in a safe place for future refere nce. Keep the box and packaging in case the product needs to be shipped in the future. 3. Follow the product and warn ing label instructions. 4. Any changes or modificati[...]

8 Optimal V iewing Dist ance 128 cm 1 1 C H V O L V O L[...]

9 Import ant Safety Inst ructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near wa ter . 6. Clean only with a dr y cloth. 7. Do not block any ven t ilation openings. Inst a ll in accordance with th e manufacturer ’s instruct ions. 8. Do not instal l near[...]

10 10. Protect the power cord from being walked on or pinched particularly at th e plug, conve- nience receptacles, and the point where they exit from the app aratus. 1 1. Use only with a cart, stand, tripod, bracket, or table specified by the manufa cturer , or sold with the apparatus. Whe n a cart is used, use caution when movi ng the cart/app ar[...]

11 Personal Safety T o avoid overloading t he power supply , do not plug too many electrical devices into an outlet or extension cable. Dangerous high-volt age electric power compo- nents are lo cated inside the TV . T o avoid electric shock, do not disassemble the casing. Do not place or drop met als, small objects, or flammable materials in t he [...]

12 Inst allation T o avoid damage to power circuits, do not place the TV in locations where there is excessive steam or dust. Do not place the TV on a bed, sofa, carpet, or in a sealed cabinet to avoid blocking the product's vent s. Install the outdoor antenna far from power trans- mission lines to av oid possible danger . Remove the power cor[...]

13 Operation Maintenanc e This product is designed for power sources as labeled on the casing. Avoid using any other power accessories to avoid electric sho ck or other damage. The plug can be inserted into an outlet in only one direction. Notify a qualified service techni- cian if you cannot plug it in correctly . If there is any problem that cann[...]

14 FCC Compliance S t atement 1 This device complies with part 15 of the FCC Rules. Operation is sub- ject to the following two conditions: (1) This device may n ot cause harm- ful interference, and ( 2) this devi ce must accept any interference received, including inter ference that may cause undesired operation. This equipment has been tested and[...]

15 DOC Compliance Notice 1 This digital app aratus does not exc eed the Class B limit s for radio noise emissions from digital app aratus as set out in the Radio Interference Regulations of the Canadian Dep artment of Communications.This device complies with Canada ICES-003 Class B. CE Conformity S t atement 2 This device complies with the requirem[...]

16 Thank you for purchasing this Liquid Crysta l Display TV . Y our LCD T V is designed to be safe, versatile, and easy to use. The design of the prod- uct is featuring " Mickey Mouse”, which makes it a fun addition to any room. Y ou can watch broadcast or cable television channels, and easily con- nect a VCR, VCD or DVD player to the standa[...]

17 Make sure the following component s are included in the box. Contact your vendor immediately if any thing is missing or damaged. M E N U P O W E R S O U R C E VOL VOL CH TV Wire Material Package G W A 1 8 3 0 0 V 8 0 C V W - 1 E 7 7 8 7 4 Power Cord Power Adapter 4-IN-1 Cable Quick Start Guide U ser's M anual RCA Jack x 3 S Jack x 1 W a r r[...]

18 Fr o n t V i e w Description Function 1 Source Select s the input source to be displayed (TV , A V1, or A V2). 2 Select channel Changes the channel. Press CH U to increase the channel numb er . Press CH V to decrease the channel number . 3 Menu T urns the On-Screen Display (OSD) menus on and of f. 4 Adjust volume Press VOL Z to i ncrease the vol[...]

19 Input and Output P o r ts Description Function 1 Antenna/cable TV line in Connects to an antenna or CA TV cable television line. 2 Left and right audio in (of A V1 ) Connects to VCR/VCD/DVD p layer CVBS RCA left and right audio cables (white and red). 3 Video in (of A V1) Connects to VCR/VCD/DVD p layer CVBS RCA video cable (yellow). 4 AV 2 Conn[...]

20 Connecting to an An tenna/Cable TV 1. Connect one e nd of the VHF/UHF (Antenna) or CA TV cable to ANT Jack (VHF/UHF IN Jack) on the back of the TV . 2. Connect the other end of the VHF/UHF (Antenna) or CA TV cable to the Antenna socket or CA TV cable. Note If you cannot receive channels after connecting an antenna or cable TV line, try scanning [...]

21 Connecting to A V De vices Connect external devices such as VCD/DVD players or VCRs to the TV using the A V1 and A V2 ports on the back o f the TV . Connecting to a VCR, VCD or DVD Player The illustration presented here shows how to connect your TV to a VCR, VCD or DVD player . Actual c onnections vary according to the make and model of the devi[...]

22 Connecting to a Video Camera The illustration presented here shows how to connect your TV to a camcorder or other type of digit al camera. Actual connections vary according to the make and model o f the device. Note The cables are co lo r-coded (black, re d, white, yellow). Connect each color- coded cab le to the appro priate connec tor on your [...]

23 Connecting Exter nal Speak ers and Headphones Headphones or externa l speakers may be used to listen to the TV instead of the built-in speakers. Connect your h eadphones to the speaker/head phone line out port as illustrated. Notes • External speakers or headphones are not included with the product. • The internal TV speakers will not outp u[...]

24 Connecting the P ow er Adapter 1. Connect the power cord to t he power adapter as illustrated. 2. Plug the power adapte r connector into the DC-IN on the rea r panel of the TV . 3. Insert the three-pronged plug at the other end of the powe r cord into a powe r outlet. Refer to the “Power Supply Safety Not es” on page 6. DC-IN AC power adapte[...]

25 Using the R emote Control For best results, use the remote co ntrol within a dist ance of 5 meters from the front of the TV’ s signal sensor . Do not exceed an an gle of 30 degrees when pointing at the signa l sensor . Refer to the following illustration. C H V O L V O L 3m 3m 30 30 5m Using the TV 10[...]

26 T ur ning the TV On and Off 1. Press the POWE R button; the power indicator LED changes fr om red to green, indicating that the power has been turned on. 2. Press the POWE R button again; the power indicator LED chang es from green to red, indicating tha t the TV is in standby ( off) mode. Selecting Channels Press the CH UP button and the CH DOW[...]

27 Switching Source Signals Press the SOURCE button on the remote control or the TV button on the control panel to select the incoming source signal. The current source setting CH XX appears on the top lef t corner of the screen, A V1 or A V2 appears on the bottom right corner of the screen. Note: The TV supports S-V ideo inpu t in addition to norm[...]

28 The On-Screen Display (OSD) menu system provides a quick a nd simple method to adjust your TV’ s settings. This chapter describes how to change each of the available settin gs. The OSD can be used with either the remote contro l or the front con- trol panel. The following sections explain h ow to adjust settings in the OSD menus with the contr[...]

29 Brightness 1. Press the MENU bu tton to enter the OSD menus. 2. Press the CH DOWN button or CH UP button to select Brightness. 3. Press the MENU bu tt on . The bright - ness slide bar is highlighted. 4. Press the CH UP button to increase the brightness. 5. Press the CH DOWN button to decrease the brightness. 6. Press the MENU b u tt on to confir[...]

30 Contrast 1. Press MENU to enter the OSD menus. 2. Press the CH DOWN button or CH UP button to select Contrast. 3. Press the MENU bu tt on . The contrast slide bar is highlighted. 4. Press the CH UP button to increase the contrast. 5. Press the CH DOWN button to decrease the contrast. 6. Press the MENU b u tt on to confirm the setting and return [...]

31 Video Setting Press the MENU button to enter the OSD Main Menu screen. 1. Press the CH DOWN button o r CH UP button to se lect Video Setting. 2. Press the MENU button t o enter the V ideo Setting menu. M E N U S O U R C E VOL VOL CH Vid eo Setting Hue G B R G R[...]

32 Hue 1. Press the CH DOWN button or CH UP button to select Hue. 2. Press the MENU bu tt on to enter the Hue submenu. 3. Press the CH UP button to increase green and decrease red. 4. Press the CH DOWN button to decrease green and increase red. 5. Press the MENU b u tt on to confirm the setting and return to the Video Setting menu. Vid eo Setting H[...]

33 Saturation 1. Press the CH DOWN button or CH UP button to select Saturation. 2. Press the MENU bu tt on to enter the Saturation subme nu. 3. Press the CH UP button to increase the saturation. 4. Press the CH DOWN button to decrease the saturation. 5. Press the MENU b u tt on to confirm the setting and return to the Video Setting menu. Vid eo Set[...]

34 Sharpness 1. Press the CH DOWN button or CH UP button to select Sharpness. 2. Press the MENU bu tton to enter the SHARPNESS submenu. 3. Press the CH UP button to increase the sharpness. 4. Press the CH DOWN button to decrease the sharpness. 5. Press the MENU b u tt on to confirm the setting and return to the Video Setting menu. Vid eo Setting Sh[...]

35 Color T emperature 1. Press the CH DOWN button or CH UP button to select Color T emp. 2. Press MENU to enter the Color T em - perature submenu. There are three default color temperatures to choo se from. St andard Color Press the CH DOWN button or CH UP button to select S tandard, then press MENU . W arm Color Press the CH DOWN button or CH UP b[...]

36 Audio Setting Press the MENU button to enter OSD Main Menu screen. 1. Press the CH DO WN button o r CH UP button to se lect Audio Setting. 2. Press the MENU button t o enter the Audio Setting menu . M E N U S O U R C E VOL VOL CH Main Menu ETC Audio Setting[...]

37 Tr e b l e 1. Press the CH DOWN button or CH UP button to select T reble. 2. Press the MENU bu tt on to enter the treble submenu. 3. Press the CH UP button to increase the treble. 4. Press the CH DOWN button to decrease the treble. 5. Press the MENU b u tt on to confirm the setting and return to the Audio Setting menu. TRE TRE BASS BASS T reble [...]

38 Bass 1. Press the CH DOWN button or CH UP button to select Bass. 2. Press the MENU bu tt on to enter the Bass submenu. 3. Press the CH UP button to increase the bass. 4. Press the CH DOWN button to decrease the bass. 5. Press the MENU b u tt on to confirm the setting and return to the Audio Setting menu. TRE TRE BASS BASS Bass Bass Audio Setting[...]

39 Balance 1. Press the CH DOWN button o r CH UP button to select Balance. 2. Press the MENU bu tt on to enter the Balance submenu. 3. Press the CH DOWN button to shift the balance to the lef t speaker . 4. Press the CH UP button to shift the balance to the right speaker . 5. Press the MENU b u tt on to confirm the setting and return to the Audio S[...]

40 Mute 1. Press the CH DOWN button or CH UP button to select Mute. 2. Press the MENU bu tt on to enter the Mute submenu. 3. Press the CH UP button to turn the mute off. 4. Press the CH DOWN button to turn the mute on. 5. Press the MENU b u tt on to confirm the setting and return to the Audio Setting menu. Audio Setting TRE TRE BASS BASS Mute Mute [...]

41 Note The setting menu is available when current select source is TV . TV Setting Press the MENU button to enter OSD Main Menu screen. 1. Press the CH DO WN button o r CH UP button to se lect TV Setting. 2. Press the MENU button t o enter the TV Setting menu. M E N U S O U R C E VOL VOL CH Main Menu ETC TV Setting[...]

42 TV/CA TV 1. Press the CH DOWN button or CH UP button to select TV/CA TV . 2. Press the MENU bu tt on to enter the TV/CA TV submenu. Receiving Cable TV Press the CH UP button to select CA TV , then press the MENU b ut to n . The avail - able CA TV choice is highlighted in yel - low . Receiving Broadcast TV Press the CH DOWN button to select TV , [...]

43 MTS 1. Press the CH DOWN button or CH UP button to select MTS. 2. Press the MENU bu tt on to enter the MTS submenu. Select from the following options. MAIN Press the CH DOWN button o r CH UP button to select MAIN. A green dot appears and MAIN is highlighted in yel - low . Press the MENU button a g ai n t o confirm the selectio n. SAP Press the C[...]

44 Auto Program 1. Press the CH DOWN button or CH UP button to selec t Auto Program. 2. Press the MENU bu tt on to enter the Auto Program Setting submenu. 3. Press the CH DOWN button or CH UP button to select ON or OFF and p ress MENU . The screen shows “Auto Program...” and the channel indicator incremen ts from 2 to 69 (ANT connection) or fro[...]

45 Manual Program 1. Press the CH DOWN button or CH UP button to select “Manual Program”. 2. Press the MENU bu tt on to enter the Manual Program submenu . 3. Press the CH DOWN button an d the CH UP button to find the channel yo u want to add. Press the MENU button to select the channel. 4. Press the MENU bu tt on to exit, and then access Channe[...]

46 Channel Add/Erase 1. Select the channel you want to add or delete, for exampl e, Channel 28. 2. Press the CH DOWN button or CH UP button to select CH. Add/Erase. 3. Press the MENU bu tt on to enter the Channel Add/Erase submenu. Select from the following op tions. Add Channel 1. Press the CH DOWN button or CH UP button to select Add. 2. Press th[...]

47 Favorite Ch annels 1. Press the CH DOWN button or CH UP button to select Favori tes CH. Edit. 2. Press the MENU button to e n t e r t h e Favorites CH. Edit subm enu. 3. The screen displays the four favorite channels: M1, M2, M3, and M4. 4. Press the CH DOWN button an d t he CH UP button to select the channel number you want to set for M1. Press[...]

48 Miscellaneous Setting Press the MENU button to enter OSD Main Menu screen. 1. Press the CH DO WN button o r CH UP button to select Mis- cellaneous Setting. 2. Press the MENU button t o enter the Miscellaneous Set- ting menu. M E N U S O U R C E VOL VOL CH Main Menu ETC Miscellaneous Miscellaneous[...]

49 Language 1. Press the CH DOWN button o r CH UP button to select Language. 2. Press the MENU bu tt on to enter the Language submenu. 3. The screen displays the available OSD languages: English and T - Chinese (Traditional Chinese). 4. Press the CH DOWN button an d the CH UP button to select a lan guage. The OSD language changes as soon as you sel[...]

50 Sleep Timer The sleep timer turns the TV of f automatically after a set pe riod of time. 1. Press the CH DOWN button o r CH UP bu tt on to select Sleeper . 2. Press the MENU bu tt on to enter the Sleeper submenu. 3. The screen displays the available sleep timer setting: Of f, 30, 60, 90, and 120 minutes. 4. Press the CH DOWN button an d the CH U[...]

51 OSD Display This setting allows you to set th e amount o f information that appears on the LCD screen when the DISPLA Y button is pressed. Y ou can choose from three settings: Of f, Portion, or All. 1. Press the CH DOWN button or CH UP button to select OSD Display . 2. Press the MENU bu tt on to enter the OSD Display submenu. 3. The screen displ[...]

52 Time Setting This section shows you how to change your TV’ s clock setting. 1. Press the CH DOWN button o r CH UP button to select T ime Setting. 2. Press the MENU bu tt on to enter the T ime Setting submenu. 3. The screen displays th e current set- ting. The hour is highlighted in yellow . 4. Press the CH DOWN button an d the CH UP button to [...]

53 Re se t The Reset function returns all of your TV’ s user settings to their fac- tory defaults. W arning: The reset function erases all of yo ur custom and favorite channel set- tings, and will reset all display settings (such as cont rast, brightness, etc.) to the fact ory default values. The reset funct ion cannot be reversed once it begins.[...]

54 T urn the power off b efore you begin cleaning the TV. Use a clean lens cloth to remove dust and finger- prints from the screen. Do not wipe the shell of the TV with alcohol, methanol, gasoline or oil products to avoid the damaging the finish. Wipe the shell with a dry soft cloth a nd use neutral cleaning fluids. If your model has leat her compo[...]

55 Situation Solution No picture and sound. • Connect the power cord prope rly . • Press the POWER button on the control panel or remote control. • Press the SOURCE button to cycle through con- nected video sources. • Press the CH UP button or the CH D OWN button to switch to other TV stations. • Check the TV/CA TV OSD se ttings. See “T[...]

56 No sound but have image. • Make sure the source device is functioning properly . • Set the volume to a higher level. • Make sure the audio cable is connected securely . • T urn the mute off. Screen image turns over . • Make sure the video si gnal cable is connected properly . Snow appears on the screen. • Adjust the location of the A[...]

57 Item Specifications DT04-12A1 LCD Panel Size 12.1-inch TFT Aspect Ratio 4:3 Best Resolution 800 (horizontal) x 600(vertical) Maximum Display Area 246.0 MM. (H) x 184.5 MM. (W) TV System NTSC Video System A V1: CVBS RCA jack A V2: S-Video or CVBS: 10-pin mini-DIN Audio System (Input) A V1: RCA left & right jacks (Input) A V2: RCA left & r[...]

58 Aspect Ratio The ratio of width to height of a film, image or display scree n. Broadcast TV Broadcasting video signals using high-frequency ele ctromagnetic waves to distribute television ch annels to viewers (standard TV broadcast). CA TV Community Antenna T elevision, the original name for cable TV . A television distribution system that uses [...]