Hayter Mowers 485A manuale d’uso

OWNER'S HANDBOOK Harrier 48 CODE 485A (English V ersion) FROM SERIAL NO: 485A001001 HANDBOOK: 4851 14(REV .1.) ISSUE 10.05.04 Blade Brake Clutch - Autodrive 485114 (1) 7/7/04 12:02 pm Page 1.1[...]

1.2 CODE 485A Engine Briggs & Stratton Diamond XTL-45 Engine T ype 12G882-1513-21 Engine / Cutterblade Speed 2800 rpm Fuel T ype Unleaded Petrol Fuel Capacity 1.5 litres Oil T ype SAE 30 engine oil Oil Sump Capacity 0.6 litres Spark Plug 802592E Spark Plug Gap 0.76mm Width of Cut 480mm Height of Cut 13 - 66mm Overall Dimensions 1 120 x 505 x 15[...]

1ST Y ear (12 months) W e certify that this service has been carried out by an Authorised Hayter Service Dealer Date: 1ST Y ear (12 months) Owner’s Name: Serial Number: Date: 2nd Y ear (24 months) W e certify that this service has been carried out by an Authorised Hayter Service Dealer Date: Owner’s Name: Serial Number: Date: Note for dealer : [...]

485114 (1) 7/7/04 12:02 pm Page 1.4[...]

1.20 Maintenance Schedule 1.21 - 1.27 Mower Maintenance 1.21 - Engine 1.21 - Thr ottle Cable Adjustment 1.21 - Carbur ettor Adjustments 1.22 - Oil Service 1.22 - Air Cleaner Service 1.23 - Spark Plug Service 1.23 - Keeping Engine Clean 1.23 - Grassbag 1.24 - Deck Housing 1.24 - Securing Nuts and Bolts 1.24 - Clutch Cable Adjustment 1.25 - Lubricati[...]

Thank you for purchasing a Hayter mower . The following pages are designed to help you gain safe and efficient service from your mower . IMPOR T ANT : This ‘Owners Handbook’ should be regarded as part of the mower as it gives essential information regarding mower safety , operation, maintenance and specifications. Read and understand this handb[...]

LIMITED WARRANTY Hayter Limited warrants to the original user/purchaser that this unit shall be free from defects in material and workmanship under normal use and service for a period of three years from the date of purchase. The manufacturer of major proprietry components ie. engines, gearbox / transaxle (where applicable) furnish their own warran[...]

SAFETY PRECAUTIONS This safety alert symbol indicates important safety messages. When you see this symbol be alert to the possibility of injury . Carefully r ead the following and inform others. Y our mower is perfectly safe if used corr ectly . Failure to observe the following precautions may r esult in serious injury . Before using the mower read[...]

SAFETY PRECAUTIONS - Always use fresh fuel. Stale fuel can block the carburettor and cause leakage. - Replace fuel tank and oil tank caps securely . A damaged cutterblade or loose fixing bolt are major hazards. Before use, always visually inspect the cutting mechanism to ensure that it is in good condition. A damaged cutterblade must be replaced im[...]

SAFETY PRECAUTIONS Do not tilt the mower when starting the engine. Do not put hands or feet near or under rotating parts. Never pick up or carry the mower while the engine is running. Never lift the rear deflector while the engine is running. Never touch the exhaust/exhaust guard or cooling fins when the engine is hot. Stop the engine and disconnec[...]

Allow the engine to cool before storing in any enclosure. T o reduce the fire hazard, keep the engine and the surrounding deck area free of grass, leaves, or excessive grease. Check the rear deflector and grassbag frequently for wear or deterioration. Replace worn or damaged parts for safety . If the fuel tank has to be drained, this should be done[...]

Remove the mower from the packaging and check that the following items have been supplied correctly . If any items are missing contact, your local Hayter dealer . 1. Engine Handbook. 2. Grassbag. T o prevent accidents cut off the long ribbon attached to the grass- bag and discard. Unscrew the handlebar securing knobs sufficiently to allow the handl[...]

T o prevent engine damage the engine is shipped without oil or petrol. The engine must be filled with the correct grade of oil and petrol befor e starting the engine. Always use high quality detergent oil classified “For service SE, SF , SG” SAE 30 oil. Never use additives with recommended oils. SAE 10W -30 multigrade oil may be used, but this [...]

Operate all control levers several times and ensure that the cables move freely . Check that the cutterblade stop and ground drive clutch levers return freely to their rest position when released. Whilst operating the engine throttle mechanism slight resistance should be felt when moving the lever to the ‘ choke ’ position. Move the throttle co[...]

T o engage the cutterblade hold the cutterblade stop lever against the handlebar with your right hand and with your left hand push the blade brake clutch lever forwards to engage. Release the blade brake clutch lever and it will return to its rest position. Hold the handlebar and operate the ground drive clutch lever to power the mower in a forward[...]

OPERA TING THE MOWER T o prevent engine damage do not use the mower on slopes greater than 20 degrees. Move the height of cut lever sideways to disengage it from the locking notch, then push forwards to lower or pull backwards to raise the height of cut. Release the lever in the required position and ensure that it locks firmly into one of the seve[...]

OPERA TING Remove the grassbag and operate the mower with the rear deflector in the closed position. Areas of heavy growth should be mown without collecting the clip- pings. If collection is required, first mow the area without the grass- bag at the maximum height of cut setting. Allow the grass clippings to dry out and then mow the area at the max[...]

There is very little work to do this month apart from brushing away leaves. Keep off the grass if frozen or waterlogged. Rake the grass thoroughly . Spike the lawn to aerate and stimulate soil organisms and root growth and apply lawn sand if necessary . The yearly lawn work programme really starts this month. As soon as the ground conditions are su[...]

Keep mowing regularly and watering as necessary . Fill any cracks caused by drought with a mixture of sharp sand and soil. In dry weath- er conditions leave the grass longer to help retain ground moisture. Raise the height of cut to allow the grass to thicken and protect the roots from the winter frost and snow . Rake out the thatch from the turf a[...]

T o prevent accidents stop the engine disconnect the spark plug lead before attempting to carry out maintenance pr ocedures on the mower . Follow the hourly or calendar intervals, whichever occurs first. More frequent service will be required if working for prolonged periods under dusty , dry conditions, or when airborne debris is present or after [...]

Change the engine oil. Clean the engine cooling system. Clean more often under dusty conditions or when airborne debris is present or after prolonged operation whilst cutting tall, dry grass. Replace the spark plug 1. Engine Cowl 2. Carburettor 3. Spark Plug / Lead 4. Exhaust Guard 5. Exhaust 6. Oil filler Cap/ Dipstick 7. Start Grip 8. Fuel Cap 9.[...]

Check the oil level daily before starting the engine and ensure that the correct oil level is maintained. Refer to-‘Before Starting the Mower ’ for oil checking and filling instructions. Change the engine oil after the first 5 hours of operation and thereafter according to the ‘Maintenance Schedule’:- 1. Drain fuel by running the engine unt[...]

Use only Briggs & Stratton spark tester (1) to check for a spark as shown in the diagram. Replace the spark plug every 100 hours or every season, whichever occurs first. A spark plug wrench is available from any authorised Briggs & Stratton service dealer . Check the spark plug gap with a feeler gauge and set at 0.76mm. Remove all grass and[...]

Remove grass debris from the top and underside of the deck housing immediately after use. T o prevent accidents fertilisers and top dr essings are particularly corrosive. Thoroughly clean the mower deck immediately after use on treated grass and stor e well away from corrosive materials. Regularly check that all securing nuts and bolts are tight. R[...]

Lubricate the wheels, pivot points and linkages with engine oil every 25 operating hours. Apply a good quality medium grease to the inner control cables at the point of entry and exit from their outer casing. Drain the fuel by running the engine until the fuel tank is empty and the engine stops. Remove the spark plug lead and allow the engine to co[...]

Assemble the cutterblade (2) with the turned up edges facing towards the engine. Secure the cutterblade using two new fixing screws and tighten to a torque of 40Nm. T o prevent accidents never reuse the fixing screws. A slightly worn cutterblade may be re-sharpened. Both blade edges must be sharpened equally to ensure balance. Sharpen the cutterbla[...]

Storage T o store the handlebar unscrew the 2 small securing knobs sufficient- ly to allow it to be pivoted forwards to rest against the mower . T ake care to ensure that the control cables do not become snagged at the pivot point and depress the engine stop lever to prevent it being dam- aged through contact with the engine spark plug. Engines sto[...]

TROUBLE SHOOTING PROBLEM POSSIBLE F AUL T REMEDY Engine will not turn over Incorrect oil level. Check oil level. Obstruction under deck. Remove obstruction. Engine smokes Excess oil level. Check oil level. Air cleaner cartridge oil Service air cleaner . soaked or blocked. Engine runs then stops Fuel starvation. Fill fuel tank. Fuel cap vent blocked[...]

PROBLEM POSSIBLE F AUL T REMEDY Engine vibrates excessively Mounting bolts loose. T ighten bolts Cutterblade bolt loose. T ighten bolt Cutterblade out of balance. Balance cutterblade Bent crankshaft. Consult your dealer Uneven cut Undulating ground conditions Change direction of travel Cutterblade worn Sharpen the cutterblade Cutterblade out of bal[...]

DECLARA TION OF CONFORMITY 1.30 EC DECLARA TION OF CONFORMITY HA YTER LIMITED, Spellbrook, Bishop’ s Stortford, Herts CM23 4BU ENGLAND declare that the lawnmower: Models: Harrier 48 Machine T ype No. CODE 485A Category: Auto-Drive BBC T ype: Pedestrian Rotary Engine manufacturer: Briggs & Stratton Speed of rotation: 2800 rpm Width of cutting [...]

NO. DESCRIPTION P ART NO. QTY ITEM NOTE 1 Mainframe - Casting 480010V 1 2 Plate - Location RH 480083V 1 3 Clamp - Boss Inner 480084W 2 4 Clamp - Boss Outer 480085W 2 5 Handwheel - Assy 480054 2 6 Spacer - BBC 485006 1 7 Throttle Control & OPC Cable 485026 1 8 Engine - B/S Diamond XTL50 APT O 4851 12 1 9 Decal - Engine 4851 11 1 10 Knob - Handle[...]

NO. DESCRIPTION P ART NO. QTY ITEM NOTE 48 Throwplate - Main Body 480011 1 49 Screw - T aptite 09545 4 50 Bearing - Roller Housing 219102 2 51 Roller - Rear W/A 480151W 2 52 Spring T ension - Rear Axle 480133 2 53 W asher 09262 3 54 Screw - T aptite 09365 22 55 Bush - Oilite Roller 340129 2 56 Roller Freewheel - Rocket Band 340150 2 57 Spacer - Nyl[...]

1.33 NO. DESCRIPTION P AR T NO. QTY ITEM NOTE 93 Axle - Front W/A 219031 1 94 Moulding - Front axle Bearing 219036 2 95 Fin - Front Insert 480013 1 96 Decal - Hayter 410087 1 97 Nut - M8 Shouldered 480086 2 98 Guide - Rope 305127 1 99 Plug - Tube 300160 2 100 T ie - Cable 3966 6 101 Setscrew 09704 1 102 Control - BBC Assy 485028 1 103 Screw Pan Hd.[...]

1.34 46 11 4 11 3 11 5 1C485V01B 1 2 3 3 4 97 4 97 5 5 6 7 7 8 9 10 98 99 99 10 104 23 11 100 100 100 100 100 100 11 12 12 13 14 15 22 18 19 20 21 16 101 102 103 24 25 26 13 13 83 36 28 29 30 31 32 96 102 95 33 34 37 38 39 39 40 41 42 45 48 49 105 111 53 11 2 49 61 49 49 50 50 43 44 44 44 51 51 52 52 52 52 53 53 54 54 55 55 56 56 59 57 58 57 60 65 [...]

485114 (1) 7/7/04 12:02 pm Page 1.35[...]

1.36 CUST OMER INFORMA TION /NOTES Serial No: Engine T ype:- 12G882-1513-21 (485A) Engine:- Briggs & Stratton Diamond XTL-45 Date of Sale:- Y our Local Dealer:- Notes:- 485114 (1) 7/7/04 12:02 pm Page 1.36[...]