Hitachi 50C10E manuale d’uso

LCD REAR PROJECTION TELEVISION Operating Guide for 50C10, 50C10E IMPORT ANT SAFETY INSTRUCTIONS ................................................................................ 2-3 FIRST TIME USE ................................................................................................................. .4 - 1 9 THE REMOTE CONTROL ............[...]

IMPORT ANT SAFETY INSTRUCTIONS 2 SAFETY POINTS YOU SHOULD KNOW ABOUT YOUR HIT ACHI LCD REAR PROJECTION TELEVISION Our reputation has been built on the quality , performance, and ease of service of HIT ACHI televisions. Safety is also foremost in our minds in the design of these units. T o help you operate these products properly , this section illu[...]

IMPORT ANT SAFETY INSTRUCTIONS 3 Read before operating equipment Follow all warnings and instructions marked on this television. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with a dry cloth. 7. Do not block any ventilation openings.[...]

ACCESSORIES 4 1. Remote Control Unit CLU-4329UG (Part No. HL01839). 2. T wo “AA” size, 1.5V batteries (For Remote Control Unit). REMOTE CONTROL BA TTER Y INST ALLA TION AND REPLACEMENT 1. Open the battery cover of the remote control by pushing the notched part of the cover with your fingers and pulling the cover off. 2. Insert two new “AA” [...]

HOW T O SET UP YOUR NEW HIT ACHI LCD REAR PTV 5 ANTENNA Unless your LCD Rear PTV is connected to a cable TV system or to a centralized antenna system, a good outdoor TV antenna is recommended for best performance. However , if you are located in an exceptionally good signal area that is free from interference and multiple image ghosts, an indoor an[...]

HOOK-UP CABLES AND CONNECTORS 6 ANTENNA CONNECTIONS TO REAR JACK P ANEL VHF (75-Ohm) antenna/CA TV (Cable TV) When using a 75-Ohm coaxial cable system, connect the outdoor antenna or CA TV coaxial cable to the ANT A (75-Ohm) terminal. If you have a second antenna or cable TV system, connect the coaxial cable to the ANT B terminal. VHF (300-Ohm) ant[...]

FRONT P ANEL CONTROLS 7 INPUT 5 S-VIDEO EXI T INPUT SELECT MENU VOL- VOL+ CH- CH+          VIDEO AUDI O L/MONO R     PUSH PUSH CURSOR  MENU/SELECT button This button allows you to enter the MENU, making it possible to set TV features to your preference without using the remote. T his button also serve[...]

FRONT P ANEL CONTROLS 8 FIRST TIME USE  IR RECEIVER The screen area also acts as the IR receiver (remote sensor) of the TV . When using the remote control, point it towards the screen for best response.  POWER button Press this button to turn the TV on or of f.  POWER light This light is on during normal operation. Light Blinking Slowly (2[...]

9 FRONT P ANEL JACKS AND CONNECTORS The front panel jacks are provided as a convenience to allow you to easily connect a camcorder or VCR as shown in the following examples: NOTE: 1. Completely insert connection cord plugs when connecting to front panel jacks. If you do not, the played back picture may be abnormal. 2. If you have a S-VHS VCR, use t[...]

10 REAR P ANEL JACKS  Antenna Input/Output ANT A - A 75-Ohm RF antenna or CA TV (Cable TV) input. ANT A can be displayed as a main picture or sub-picture. ANT B - A 75-Ohm RF antenna or CA TV (Cable TV) input. ANT B can only be displayed as a main picture. ANT B cannot be displayed as a sub-picture. TO CONVERTER - This antenna output allows the [...]

11 REAR P ANEL JACKS  Component: Y -P B P R Inputs Inputs 1 and 2 provide Y -P B P R jacks for connecting equipment with this capability , such as a DVD player or Set T op Box. Y ou may use composite video signal for INPUT :2. NOTES: 1. Do not connect composite VIDEO and S-VIDEO to Input 3, 4 or 5 at the same time. S-VIDEO has priority over VIDE[...]

12 REAR P ANEL CONNECTIONS NOTES: 1. Connect only 1 component to each input jack. 2. Follow connections that pertain to your personal entertainment system. 3. Composite video signal can be input to Input2~Input5. 4. Cables are not included with the purchase of this TV , except when noted as “provided”. TYPICAL FULL-FEA TURE SETUP Outside antenn[...]

13 TIPS ON REAR P ANEL CONNECTIONS • S-VIDEO and DVI-HDTV connections are provided for high performance laserdisc players, VCRs etc. that have this feature. Use these connections in place of the standard video connection if your device has this feature. • If your device has only one audio output (mono sound), connect it to the left audio jack o[...]

14 CONNECTING EXTERNAL AUDIO DEVICES T o control the audio level of an external audio amplifier with the TV remote control, connect the system as shown below . NOTES: 1. T o prevent damage to the speaker and distorted sound, set the volume control of the audio amplifier lower and adjust the sound using the remote control of the TV set. 2. Follow co[...]

15 CONNECTING EXTERNAL VIDEO DEVICES CONNECTING A MONAURAL AUDIO SOURCE TO INPUT2~INPUT5 1. Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack, as shown on the TV set below . 2. Connect the cable from the AUDIO OUT of the VCR or the laserdisc player to the INPUT (MONO)/L(AUDIO) jack. 3. Press the VID2~[...]

16 CONNECTING EXTERNAL VIDEO DEVICES CONNECTING A STEREO SOURCE T O INPUT2~INPUT5 1. Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack, as shown on the TV set below . 2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack. 3. Connect the cable from the[...]

17 CONNECTING EXTERNAL VIDEO DEVICES CONNECTING AN S-VIDEO SOURCE TO INPUT 3, 4 AND 5 1. Connect the cable from the S-VIDEO OUT of the VCR or the laserdisc player to the INPUT (S-VIDEO) jack, as shown on the TV set below . 2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack. 3. Connect the cable [...]

18 CONNECTING EXTERNAL VIDEO DEVICES CONNECTING A COMPONENT SOURCE WITH DVI-HDTV CAP ABILITY T O INPUT 1 1. Connect the DVI connection cable from the output of the HDTV set top box or DVD player to the DVI-HDTV input as shown on the TV set below . 2. Connect the cable from the AUDIO OUT R of the HDTV set top box or DVD player to the INPUT (AUDIO/R)[...]

19 CONNECTING EXTERNAL VIDEO DEVICES CONNECTING A COMPONENT SOURCE T O INPUT 1 OR 2: Y -P B P R . 1. Connect the cable from the Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (Y) jack, as shown on the TV set below . 2. Connect the cable from the C B /P B OUT or B-Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT[...]

20 THE REMOTE CONTROL In addition to controlling all the functions on your HIT ACHI LCD Rear PTV , the new remote control is designed to operate differ - ent types of VCRs, CBL (Cable TV) converters, satellite receiver , DVD players, and other audio/video equipment with one touch. Basic operation keys are grouped together in one area. T o operate y[...]

21 HOW T O USE THE REMOTE TO CONTROL YOUR LCD REAR PTV  POWER button Press this button to turn the TV set on or of f when the remote is in TV mode.  PICTURE-IN-PICTURE buttons See separate section on pages 25, 26 and 27 for description. 햴 DA Y/NIGHT button Press this button to toggle between Day and Night picture mode settings. Select Day f[...]

22 HOW T O USE THE REMOTE TO CONTROL YOUR LCD REAR PTV  CHANNEL selector buttons CHANNEL selector buttons are used to select channels, lock access code, etc. Enter one, two, or three numbers to select channels. Enter “0” first for channels 1 to 9 or simply press the single digit channel you wish to tune then wait a few seconds for the TV to [...]

23  ASPECT button Press this button to quickly change the picture format ASPECT ratio. Depending on the input signal, the picture format ratio allows you to adjust the images through the following options. 4:3 Standard Use this aspect mode to display conventional (4:3) images. Side panels (gray areas) are placed to the left and right of the imag[...]

24 HOW T O USE THE REMOTE TO CONTROL YOUR LCD REAR PTV  SLEEP button Press this button to display the sleep timer in the lower center of the screen. Every subsequent press of this button will add 15 minutes to this timer up to a maximum of three hours. Once set, use the INFO button to view time remaining.  INFO button Press this button when y[...]

25 PICTURE-IN-PICTURE (PIP) Y our HIT ACHI LCD Rear PTV incorporates dual tuner technology designed for improved viewing enjoyment. This dual tuner feature allows you to view antenna inputs on both the main picture and sub-picture simultaneously , with separate tuning control for each. ANT A input can be viewed as both the main picture and the sub-[...]

26 PICTURE-IN-PICTURE (PIP) SPLIT MODE PICTURE-IN-PICTURE Split Mode PIP displays the main picture and sub-picture evenly on the screen.  SURF button PICTURE-IN-PICTURE This feature will automatically scan all active channel numbers (those set in memory) and display them as PIP sub-pictures, Press the SURF button a second time or EXIT button to [...]

27 PICTURE-IN-PICTURE (PIP)  FREEZE button (With PIP ON) If you wish to freeze the sub-picture, press the FREEZE button. This is convenient when trying to write down the address for a mail order company , recording statistics for a sporting event, etc. T o return the picture to motion, press the FREEZE button again.  FREEZE button (with PIP O[...]

28 USING THE REMOTE T O CONTROL VCR FUNCTIONS Operating the precoded function for your VCR. This remote is designed to operate different types of VCRs. Y ou must first program the remote to match the remote system of your VCR (refer to page 31 for pre-codes). 1. T urn ON your VCR. 2. Aim the remote control at the front of your VCR. 3. Press and rel[...]

29 USING THE REMOTE T O CONTROL CABLE/SA TELLITE BOX FUNCTIONS Operating the precoded function for your cable/satellite box. This remote is designed to operate different types of cable/satellite boxes. Y ou must first program the remote to match the remote sys- tem of your cable/satellite box (refer to page 31). 1. T urn ON your cable/satellite box[...]

30 USING THE REMOTE T O CONTROL DVD FUNCTIONS Operating the precoded function for your DVD player . This remote is designed to operate different types of DVD players. Y ou must first program the remote to match the remote system of your DVD player (refer to page 31 for pre-codes). 1. T urn ON your DVD player . 2. Aim the remote control at the front[...]

31 VCR, CABLE, SA TELLITE, DVD and AUDIO CODES FOR REMOTE CONTROL CABLE BRAND CODE General Instrument . . . . . . . . . . . . . . . . . . . . . . . . . .17 Hamlin . . . . . . . . . . . . . . . . . . . . . . . . . . . .22,23,24,25 Jerrold . . . . . . . . . . . . . . . .00,01,02,03,04,05,06,07,21 Oak . . . . . . . . . . . . . . . . . . . . . . . . . [...]

32 ON-SCREEN DISPLA Y (OSD) PUSH Locks Chan. Manager Aspect Audio Video Move SEL Sel Setup This part of the screen shows which selections are available. This part of the screen shows which Remote Control buttons to use. 1. Press MENU on the remote control to display the different features on your HIT ACHI LCD Rear PTV . 2. Press the CURSOR  , ?[...]

33 ON-SCREEN DISPLA Y (OSD) Picture Mode Select between the two picture modes; Day and Night. Contrast Adjust contrast. Brightness Adjust brightness. Color Adjust color . T int Adjust tint. Sharpness Adjust sharpness. Color T emperature Set this to High for less intense color with more blue, set to Medium for natural color , set to Standard for sta[...]

VIDEO 34 Select VIDEO to adjust picture settings and improve picture quality . Y ou can customize each of the Video Inputs to your preference to increase viewing performance and pleasure depending upon the video program being viewed. If RESET is selected, only the selected mode will reset to initial conditions. Video Use the CURSOR buttons  or ?[...]

VIDEO 35 Use this function to change the contrast between black and white levels in the picture. Use the CURSOR button  or  to highlight the function to be adjusted. Press the SELECT button or CURSOR button  to select the function settings. Press the CURSOR buttons  or  to adjust the function. Press MENU to return to main menu. Press[...]

VIDEO 36 This function allows you to Reset the Video Menu Settings of the present input and return it to the Day Mode condition depending on the selected Video mode. Use CURSOR button  or  to highlight functions. Press the SELECT button to select RESET VIDEO SETTINGS. Press EXIT to quit menu or select RESET VIDEO SETTINGS to return to previou[...]

VIDEO 37 Use this function to adjust the percentage of Red, Green and Color according to the user ’ s preference. Use T int to adjust flesh tones so they appear natural. Color Decoding Color Decoding Video Move SEL Return Red 50% Green 50% Color 50% Tint Noise Reduction Auto Color Color Decoding Video Move SEL Select Auto Movie Mode Off ANT A/B L[...]

AUDIO 38 Select AUDIO to adjust the TV to your preference and to improve the sound quality . Audio Sound Enhancement Balance Bass Treble Audio Move SEL Return Internal Speakers Audio Source Loudness Auto Noise Cancel 50% Off On Locks Chan. Manager Aspect Audio Video Move SEL Sel Setup On On 45% LR Stereo Change Value Perfect Volume On MENU S ELECT [...]

AUDIO 39 Sound Enhancement The following surround settings will reproduce the “live” sound you would hear in concert halls, sports stadiums, movie theaters, etc. with only two channels. T o enter SOUND ENHANCEMENT , use the CURSOR buttons  or  to highlight then press the CURSOR buttons  or  to select Sound Enhancement of your choice[...]

40 ASPECT MODE Aspect Mode Auto Aspect Automatically adjust the Aspect Ratio depending on the input signal to fill the screen. Press CURSOR buttons  or  to select menu item. Press the SELECT button to select. A “ ✓ ” in the box indicates that the feature is ON. V ertical Position This function allows you to select when aspect style is e[...]

CHANNEL MANAGER 41 Select Antenna if you are using an indoor or outdoor antenna. Select Cable if you have cable TV . Use the CURSOR buttons  or  to highlight the correct Channel Source. Press the SELECT button to select highlighted source. Press EXIT to quit the MENU or select CHAN. MANAGER to return to previous menu. Reception channels for e[...]

CHANNEL MANAGER 42 This feature will automatically store active TV channels in AUTO CHANNEL SCAN. This will allow you to skip unused channels when using CHANNEL UP (  ) or DOWN (  ). If the EXIT button is pressed while AUT O CHANNEL SCAN function is engaged, programming will stop. If two antennas are connected, switch antenna inputs and repea[...]

43 CHANNEL MANAGER Press the CURSOR button  or  to review more channels. Press EXIT to quit the menu or select CHANNEL LIST to return to previous menu. Move SEL Return Ch# Scan CH ID Lock 2 Off -------- 3 Off -------- 4 Off -------- 5 Off -------- 6 Off -------- 7 Off -------- 8 Off -------- 9 Off -------- Chan. Manager Channel List Move SEL [...]

44 ON-SCREEN DISPLA Y CHANNEL MANAGER This section contains advanced features which will make TV viewing easier and more enjoyable. Use this feature to give up to 20 channels a name when Antenna signal source is selected and up to 60 channels a name when Cable TV signal source is selected. NOTES: 1. If Ant A and Ant B are in the same Antenna/Cable [...]

LOCKS 45 ON-SCREEN DISPLA Y This function will block out the picture and sound of the selected channel or video input. It can also be used to keep the TV from being viewed for a scheduled time period that you set. The code to enter the Locks feature is a four digit secret code number . The factory preset code is 0000. Use the number buttons to sele[...]

LOCKS 46 ON-SCREEN DISPLA Y Use MOVIE RA TINGS to block from showing any movie you feel might have inappropriate content. Use CURSOR  or  to select the MOVIE RA TING category that you want to block. Press SELECT to block the MOVIE RA TING that you have selected. Once rating is selected, for example PG-13, all movies rated PG-13 and higher (R,[...]

LOCKS 47 ON-SCREEN DISPLA Y TV Ratings Move SEL Return Status TV-Y: TV-Y7: TV-G: TV-PG: TV-14: TV-MA: Sub Category DL S VF V Movie Ratings TV Time Lock Engage Lock Change Access Code Locks Move SEL Select Canadian Ratings (Frn) Canadian Ratings (Eng) TV Ratings TV Ratings Locks SELECT or TV Parental Guide Ratings T able Use TV RA TINGS to block fro[...]

LOCKS 48 Canadian Ratings (Eng) Move SEL Return Status C: C8+: G: PG: 14+: 18+: Movie Ratings TV Time Lock Engage Lock Change Access Code Locks Move SEL Select Canadian Ratings (Frn) Canadian Ratings (Eng) TV Ratings Canadian Ratings (Eng) Locks SELECT or Canadian Ratings English T able Use CANADIAN RA TINGS (ENG) to block any type of movie and tel[...]

LOCKS 49 Canadian Ratings (Frn) Move SEL Return Status G: 8 ans+: 13 ans+: 16 ans+: 18 ans+: Movie Ratings TV Time Lock Engage Lock Change Access Code Locks Move SEL Select Canadian Ratings (Frn) Canadian Ratings (Eng) TV Ratings Canadian Ratings (Frn) Locks SELECT or Canadian Ratings French T able Use CANADIAN RA TINGS (Frn) to block Canadian Fren[...]

SETUP 50 Select SETUP when setting your TV up for the first time. Use the CURSOR  or  on the remote to highlight the function desired. This feature will allow you to select any one of three different languages for all on-screen displays. Use CURSOR  or  to highlight the language of your choice. Press SELECT to select the highlighted lan[...]

SETUP 51 This function allows you to choose from two menu backgrounds. Use CURSOR  or  to highlight Set The Menu Background (shaded or solid), and press the SELECT button to select setting. Press EXIT to quit menu or select MENU PREFERENCE to return to previous menu. Select Solid for a black background (no picture can be seen behind menu scre[...]

SETUP 52 The time must be adjusted before you can use the “Set Event T imer” or “TV Time Out” features. Set The Clock Move SEL Return Time : 03:57 PM Apr 29, 2003 Move SEL Return Time : 03:57 PM Apr 29, 2003 Move SEL Return Time : 03:57 PM Apr 29, 2003 Set Setup Set The Clock Setup Set The Clock Setup Set The Clock Set The Inputs Set The Cl[...]

SETUP 53 Use this feature to give a name to any of the five video inputs. Press CURSOR  ,  ,  and  to highlight the name of the video inputs. Press the SELECT button to select desired input name. Select Reset to set video names to original factory preset condition. Set The Inputs Move SEL Return Video1 Video2 Video3 Video4 Video5 Rename[...]

SETUP 54 Set The Color System Set Black Side Panel This function allows you to automatically change tint and color coordinates for DTV programs. HDTV - High Definition T elevision - Use for High Vision Signal Y -P B P R from HDTV Set-T op Box. SDTV/DVD - Standard Definition T elevision or DVD (Digital V ersatile Disc Player) Y -C B C R . NOTES: 1. [...]

SETUP 55 This function will automatically turn the LCD Rear Projection TV on and of f, one time only , every day , or once a week. This Event Timer is only for Ant A/Ant B. Use CURSOR  to select Event 1, 2, 3 or 4. Use CURSOR  to change position of On time, Off time, Antenna, Channel, and On/Off Frequency . Use CURSOR  or  to select the[...]

56 SETUP CLOSED CAPTIONS are the dialogue, narration, and/or sound effects of a television program or home video which are displayed on the TV screen. Y our local TV program guide denotes these programs as or . Closed Caption Move SEL Return Caption Display Off On Auto Analog Captions Mode: Captions Text Channel: 1 2 3 4 Set Closed Captions Setup S[...]

57 LAMP REPLACEMENT Lamp Replacement After extended use, if the TV picture turns dark, the color looks unusual or LAMP INDICA TOR light turns on, then it is time to replace the lamp with a new lamp. Lamp Life The lamp life may vary based on usage of the LCD Rear PTV . T urning on and off frequently may shorten the life of the lamp. W ARNING: The la[...]

58 LAMP REPLACEMENT 120V PUSH POWER FRONT COVER 1. T urn off the main power switch and unplug the power cord. W ait at least 30 minutes to allow the lamp to cool down before replacing it. NOTE: THE LAMP IS VER Y HOT AND MA Y CAUSE FIRE OR SEVERE BURNS. W AIT A T LEAST 30~45 MINUTES T O ALLOW THE LAMP TO COOL BEFORE PROCEEDING WITH LAMP REMOV AL. FR[...]

59 LAMP REPLACEMENT SCREW LAMP COVER PHILLIP HEAD SCREW DRIVER INPUT 5 S-VIDEO EXI T INPUT SELECT MENU VOL- VOL+ CH- CH+    VIDEO AUDIO L/MONO R 3. Remove the screw securing the lamp cover with a Phillips head screw driver as shown. Remove the lamp cover . HANDLE REMOVE SCREWS HANDLE LAMP UNIT 4. Remove the two screws that hold the lamp[...]

60 LAMP REPLACEMENT 6. Without installing the lamp cover , the power will be off and the Lamp Indicator will flash (see page 8). Be sure to install the lamp cover by re-engaging the two clips and tighten the screws before turning the power on, otherwise it may cause unusual colors. SCREW LAMP COVER PHILLIP HEAD SCREW DRIVER INPUT 5 S-VIDEO EXI T IN[...]

61 CARE OF YOUR HIT ACHI TELEVISION AND YOUR REMOTE CONTROL DO Dust the screen and cabinet with a soft cloth. Clean the screen with a soft cloth moistened in warm water and dry with a soft cloth. A mild soap may be used if the screen is extremely dirty . Place your T elevision away from extreme heat, humidity , and extremely dusty places. Remove th[...]

62 RECEPTION PROBLEMS • IGNITION NOISE: Black spots or horizontal streaks may appear , picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps, electrical drills, and other electrical appliances. • GHOSTS: Ghosts are caused by the television signal following two paths. One is the direct path and[...]

USEFUL INFO 63 HIT ACHI Liquid Crystal Display incorporates advanced power surge protection technology designed to protect against component or circuit damage due to external or internal voltage power surges. IF YOUR TELEVISION SHOULD APPEAR T O HA VE A LOSS OF POWER, PLEASE FOLLOW THIS PROCEDURE: 1. Press the power switch (ON/OFF switch) once. 2. [...]

USEFUL INFO 64 Features: • Superfine Picture Quality 1280 Line Horizontal Resolution • Remote (Controls many VCR brands, cable boxes, satellite boxes, and other audio equipment). • New Easy-to-Use (3-Language) On-Screen Menu • Full Set of Input Jacks, including S-VIDEO • COMPONENT VIDEO: Y -P B /P R Inputs: • Power Input . . . . . . . .[...]

USEFUL INFO 65 Hitachi America, L TD. Home Electronics Division Hitachi has made every effort to assure you hours of trouble free operation from your unit. However , should you require service , a network of Hitachi Authorized Service Facilities has been established in all 50 states and Puerto Rico. Each facility will provide you with convenient an[...]

USEFUL INFO 66 In Canada: 1-800-HIT ACHI (1-800-448-2244) Monday - Friday EST 9:00am - 7:00pm Saturday EST 9:00am - 5:00pm Hitachi Canada, L TD. Digital Media Division Should you have any questions regarding warranty , service, operation, or technical assistance, please contact: Look for your French Manual on the outside of the box. If the manual i[...]

67 INDEX INDEX Clock T ime, 52 A Date, 52 Closed Captions Accessories, 4 Analog Captions, 56 Antennas (Connecting), 5, 6 Color System, 54 Aspect Ratio, 23 Color T emperature, 35 Audio (Sound Enhancement) Color , 35 SRS, 39 Contrast, 35 BBE, 39 Audio Settings, 38 - 39 D Audio Source, 38 DVI-HDTV , 1 1, 12, 18 Auto Color , 37 Auto Noise Cancel, 38 E [...]

68 INDEX L Picture-in-Picture (PIP), 25 - 27 Lamp Picture-outside-Picture (POP), 25 Lamp Indicator , 8 Lamp Replacement, 57-60 Language Menu Language, 50 R Locks Remote Control Change Access Code, 45 Functions, 20 - 30 Channel Lock, 45 Programming Codes, 28 - 31 Input Lock, 45 Installing Batteries, 4 Front Panel Lock, 45 TV T ime Lock, 45 Movie Rat[...]

69 NOTES[...]

70 NOTES[...]

71 NOTES[...]

QR63612[...]