Hitachi CP-RX80EF manuale d’uso

1 Projector CP-RX80 User’ s Manual (detailed) Operating Guide Thank you for purchasing this projector . Ź Before using this product, please read all manuals for this product. Be sure to read “ Safety Guide ” fi rst. After reading them, store them in a safe place for future reference. WARNING • The information in this manual is subject to [...]

1 About The Symbols V arious symbols are used in this manual, the user ’s manual and on the product itself to ensure correct usage, to prevent danger to the user and others, and to prevent property damage. The meanings of these symbols are described below . It is important that you read these descriptions thoroughly and fully understand the conte[...]

2 Safety Precautions W ARNING Never use the projector if a problem should occur . Abnormal operations such as smoke, strange odor , no image, no sound, excessive sound, damaged casing or elements or cables, penetration of liquids or foreign matter , etc. can cause a fire or electrical shock. In such case, immediately turn off the power switch and t[...]

3 W ARNING Be cautious of High temperatures of the projector . High temperatures are generated when the lamp is lit. It could result in fire or burn. Use special caution in households where children are present. Do not touch about the lens, air fans and ventilation openings during use or immediately after use, to prevent a burn. T ake care of venti[...]

4 W ARNING Be careful in handling the light source lamp. The projector uses a high-pressure mercury glass lamp made of glass. The lamp can break with a loud bang, or burn out. When the bulb bursts, it is possible for shards of glass to fly into the lamp housing, and for gas containing mercury to escape from the projector ’ s vent holes. Please ca[...]

5 Safety Precautions (continued) CAUTION Be careful in moving the projector . Neglect could result in an injury or damage. • Do not move the projector during use. Before moving, disconnect the power cord and all external connections, and close the slide lens door or attach the lens cap. • Avoid any impact or shock to the projector . • Do not [...]

6 Safety Precautions (continued) NOTE Do not give the remote control any physical impact. A physical impact could cause damage or malfunction of the remote control. • T ake care not to drop the remote control. • Do not place the projector or heavy objects on the remote control. T ake care of the lens. • Close the slide lens door or attach the[...]

7 Safety Precautions (continued) NOTE About consumables. Lamp, LCD panels, polarizors and other optical components, and air filter and cooling fans have a different lifetime in each. These parts may need to be replaced after a long usage time. • This product isn’t designed for continuous use of long time. In the case of continuous use for 6 hou[...]

8 • If the lamp should break (it will make a loud bang when it does), unplug the power cord from the outlet, and make sure to request a replacement lamp from your local dealer . Note that shards of glass could damage the projector ’ s internals, or cause injury during handling, so please do not try to clean the projector or replace the lamp you[...]

9 Regulatory Notices FCC Statement W arning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. W ARNING: This equipment has b[...]

2 Contents Contents Contents About this manual . . . . . . . . . . . 1 Contents . . . . . . . . . . . . . . . . . . 2 Projector features . . . . . . . . . . . 3 Prepar a tions . . . . . . . . . . . . . . . 3 Checking the contents of package . . . 3 Par t names . . . . . . . . . . . . . . . . 4 Projector . . . . . . . . . . . . . . . . . . . . . . 4[...]

3 Projector features / Preparations • Keep the original packing materials, for future reshipment. Be sure to use the original packing materials when moving the projector . Use special caution for the lens. NO TE Projector features Projector features This projector realizes the large projection image, even if in a small space. Preparations Prepara[...]

4 Par t names Part names Part names Projector (1) Lamp cover (   52 ) The lamp unit is inside. (2) Focus ring (   18 ) (3) Zoom ring (   18 ) (4) Control panel (   5 ) (5) Elevator buttons (x 2) (   18 ) (6) Elevator feet (x 2) (   18 ) (7) Remote sensor (   13 ) (8) Lens (   56 ) (9) Intake vents (10[...]

5 Par t names Control panel (1) ST ANDBY/ON button (   14 ) (2) INPUT button (   16, 22 ) (3) MENU button (   22 ) It consists of four cursor buttons. (4) POWER indicator (   1 1, 14, 58 ) (5) TEMP indicator (   58 ) (6) LAMP indicator (   58 ) R ear panel (   9 ) (1) AUDIO OUT port (2) AUDIO IN port (3) CO[...]

6 Par t names R emote contr ol (1) VIDEO button (   16 ) (2) COMPUTER button (   16 ) (3) SEARCH button (   17 ) (4) ST ANDBY/ON button (   14 ) (5) ASPECT button (   17 ) (6) AUTO button (   19 ) (7) BLANK button (   21 ) (8) MAGNIFY - ON button (   20 ) (9) MAGNIFY - OFF button (   13, 20 ) (1[...]

7 Setting up Install the projector according to the environment and manner the projector will be used in. Ar rangement Refer to the illustrations and tables below to determine screen size and projection distance. The values shown in the table are calculated for a full size screen: 1024 x 768 a Screen size (diagonal) b Projection distance (±10%) c1[...]

8 Setting up Ź Place the projector in a stable horizontal position. If the projector falls or is knocked over , it could cause injury and/or damage to the projector . Using a damaged projector could then result in fi re and/or electric shock. • Do not place the projector on an unstable, slanted or vibrational surface such as a wobbly or incline[...]

9 Setting up VIDEO OUT AUDIO OUT RGB OUT RGB IN S-VIDEO OUT AUDIO IN L R AUDIO OUT Connecting your de vices Be sure to read the manuals for devices before connecting them to the projector . Make sure that all the devices are suitable to be connected with this product, and prepare the cables required to connect. Please refer to the following illustr[...]

10 Setting up • Be sure to read the manuals for devices before connecting them to the projector , and make sure that all the devices are suitable to be connected with this product. Before connecting to a PC, check the signal level, the signal timing, and the resolution. - Some signal may need an adapter to input this projector . - Some PCs have m[...]

11 Setting up Connecting pow er supply 1. Put the connector of the power cord into the AC IN (AC inlet) of the projector . 2. Firmly plug the power cord’s plug into the outlet. In a couple of seconds after the power supply connection, the POWER indicator will light up in steady orange. Ź Please use extra caution when connecting the power cord, a[...]

12 Remote control Remote control Remote control Installing the batteries Please insert the batteries into the remote control before using it. If the remote control starts to malfunction, try to replace the batteries. If you will not use the remote control for long period, remove the batteries from the remote control and store them in a safe place. [...]

13 Remote control Changing the frequency of r emote control signal The accessory remote control has the two choices on signal frequency Mode 1:NORMAL and Mode 2:HIGH. If the remote control does not function properly , attempt to change the signal frequency . In order to set the Mode, please keep pressing the combination of two buttons listed below [...]

14 Po wer on/off 1. Make sure that the power cord is fi rmly and correctly connected to the projector and the outlet. T ur ning on the pow er 2. Make sure that the POWER indicator is steady orange (   58 ). 3. Press ST ANDBY/ON button on the projector or the remote control. The projection lamp will light up and POWER indicator will begin bli[...]

15 Operating Operating Operating 1. Adjusting the v olume Use the VOLUME + / VOLUME - buttons to adjust the volume. A dialog will appear on the screen to aid you in adjusting the volume. If you do not do anything, the dialog will automatically disappear after a few seconds. Ɣ When is selected for current picture input port, the volume adjustment i[...]

16 Operating 1. Press COMPUTER button on the remote control to select the COMPUTER IN port. COMPUTER button VIDEO DOC.CAMERA ASPECT SEARCH BLANK COMPUTER MY SOURCE/ AUTO VIDEO DOC.CAMERA KEYSTONE ASPECT SEARCH BLANK MUTE MY BUTTON COMPUTER MY SOURCE/ AUTO MAGNIFY PAGE UP VOLUME DOWN ࡯ ON OFF 㧗 FREEZE MY SOURCE / DOC. CAMERA button 1. Press the [...]

17 1. Press ASPECT button on the remote control. Each time you press the button, the projector switches the mode for aspect ratio in turn. Selecting an aspect ratio Ɣ ASPECT button does not work when no proper signal is inputted. Ɣ NORMAL mode keeps the original aspect ratio setting. 1. Press SEARCH button on the remote control. The projector wil[...]

18 Operating Adjusting the projector’s ele va tor When the place to put the projector is slightly uneven to the left or right, use the elevator feet to place the projector horizontally . Using the feet can also tilt the projector in order to project at a suitable angle to the screen, elevating the front side of the projector within 14 degrees. Th[...]

19 Operating 1. Press POSITION button on the remote control when no menu is indicated. The “POSITION” indication will appear on the screen. Adjusting the position 2. Use the Ÿ / ź / Ż / Ź cursor buttons to adjust the picture position. When you want to reset the operation, press RESET button on the remote control during the operation. T o co[...]

20 Operating • The zoom level can be fi nely adjusted. Closely watch the screen to fi nd the level you want. NO TE 1. Press the ON button of MAGNIFY on the remote control. The “MAGNIFY” indication will appear on the screen and the projector will go into the MAGNIFY mode. When the ON button of MAGNIFY is pressed fi rst after the projector i[...]

21 Operating 1. Press BLANK button on the remote control. The BLANK screen will be displayed instead of the screen of input signal. Please refer to BLANK item in SCREEN menu (   37 ). T o exit from the BLANK screen and return to the input signal screen, press BLANK button again. T emporaril y blanking the screen Ɣ The projector automatically[...]

22 Operating 1. T o start the MENU, press the MENU button. The MENU you last used (EASY or ADV ANCED) will appear . EASY MENU has priority to appear just after powered on. Using the menu function 2. (1) Use the Ÿ / ź cursor buttons to select an item to operate. If you want to change it to the ADV ANCED MENU, select the ADV ANCED MENU. (2) Use the[...]

23 Operating Using the menu function (continued) 3. T o close the MENU, press the MENU button again or select EXIT and press the Ż cursor button or ENTER button. Even if you do not do anything, the dialog will automatically disappear after about 30 seconds. Ɣ If you want to move the menu position, use the cursor buttons after pressing the POSITIO[...]

24 EASY MENU EASY MENU EASY MENU From the EASY MENU, items shown in the table below can be performed. Select an item using the Ÿ / ź cursor buttons. Then perform it according to the following table. Item Description ASPECT Using the Ż / Ź buttons switches the mode for aspect ratio. See the ASPECT item in IMAGE menu (     29 ).[...]

25 EASY MENU Item Description ECO MODE Using the Ż / Ź buttons turns off/on the eco mode. See the ECO MODE item in SETUP menu (     34 ). MIRROR Using the Ż / Ź buttons switches the mode for mirror status. See the MIRROR item in SETUP menu (     34 ). RESET Performing this item resets all of the EASY MENU ite[...]

26 PICTURE menu PICTURE menu PICTURE menu From the PICTURE menu, items shown in the table below can be performed. Select an item using the Ÿ / ź cursor buttons, and press the Ź cursor button or ENTER button to execute the item. Then perform it according to the following table. Item Description BRIGHTNESS Using the Ż / Ź buttons adjusts the bri[...]

27 PICTURE menu Item Description COLOR TEMP Using the Ÿ / ź buttons switches the color temperature mode. T o adjust CUSTOM Selecting a mode whose name includes CUSTOM and then pressing the Ź button or the ENTER button displays a dialog to aid you in adjusting the OFFSET and GAIN of the selected mode. OFFSET adjustments change the color intensity[...]

28 PICTURE menu Item Description MY MEMOR Y This projector has 4 memories for adjustment data (for all the items of the PICTURE menu). Selecting a function using the Ÿ / ź buttons and pressing the Ź or ENTER button performs each function. SA VE-1 Ù SA VE-2 Ù SA VE-3 Ù SA VE-4 LOAD-4 Ù LOAD-3 Ù LOAD-2 Ù LOAD-1 SA VE-1, SA [...]

29 IMAGE menu IMAGE menu IMAGE menu From the IMAGE menu, items shown in the table below can be performed. Select an item using the Ÿ / ź cursor buttons, and press the Ź cursor button or ENTER button to execute the item. Then perform it according to the following table. Item Description ASPECT Using the Ÿ / ź buttons switches the mode for aspec[...]

30 IMAGE menu Item Description H PHASE Using the Ż / Ź buttons adjusts the horizontal phase to eliminate fl icker . Right Ù Left • This item can be selected only for a computer signal or a component video signal. H SIZE Using the Ż / Ź buttons adjusts the horizontal size. Small Ù Large • This item can be selected only for a compute[...]

31 INPUT menu INPUT menu INPUT menu From the INPUT menu, items shown in the table below can be performed. Select an item using the Ÿ / ź cursor buttons, and press the Ź cursor button or ENTER button to execute the item. Then perform it according to the following table. Item Description PROGRESSIVE Using the Ÿ / ź buttons switches the progress [...]

32 INPUT menu Item Description VIDEO FORMA T The video format for S-VIDEO port and VIDEO port can be set. (1) Use the Ÿ / ź buttons to select the input port. S-VIDEO Ù VIDEO (2) Using the Ż / Ź buttons switches the mode for video format. AUTO Ù NTSC Ù P AL Ù SECAM N-P AL Ù M-P AL Ù NTSC4.43 • This item is performed onl[...]

33 INPUT menu Item Description RESOLUTION The resolution for the COMPUTER IN input signals can be set on this projector . (1) In the INPUT menu select the RESOLUTION using the Ÿ / ź buttons and press the Ź button. The RESOLUTION menu will be displayed. (2) In the RESOLUTION menu select the resolution you wish to display using the Ÿ / ź buttons[...]

34 SETUP menu SETUP menu SETUP menu From the SETUP menu, items shown in the table below can be performed. Select an item using the Ÿ / ź cursor buttons, and press the Ź cursor button or ENTER button to execute the item. Then perform it according to the following table. Item Description KEYSTONE Using the Ż / Ź buttons corrects the vertical key[...]

35 SETUP menu Item Description ST ANDBY MODE Using Ÿ / ź buttons switches the standby mode setting between NORMAL and SA VING. NORMAL Ù SA VING When SA VING is selected, the power consumption in the standby mode is lowered with some functional restriction as below: • When SA VING is selected, AUDIO OUT ST ANDBY setting of AUDIO SOURCE (  ?[...]

36 Item Description VOLUME Using the Ÿ / ź buttons adjusts the volume. High Ù Low SPEAKER Using the Ÿ / ź buttons turns on/off the built-in speaker . ON Ù OFF When OFF is selected, the built-in speaker does not work. AUDIO SOURCE The combination of a picture and audio input port can be arranged in the menu. The audio coming into the port sele[...]

37 SCREEN menu SCREEN menu SCREEN menu From the SCREEN menu, items shown in the table below can be performed. Select an item using the Ÿ / ź cursor buttons, and press the Ź cursor button or ENTER button to execute the item. Then perform it according to the following table. Item Description LANGUAGE Using the Ÿ / ź / Ż / Ź buttons switches th[...]

38 SCREEN menu Item Description MyScreen This item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and ST ART UP screen. Display the image you want to capture before executing the following procedure. 1. Selecting this item displays a dialog titled “MyScreen”. It will ask you if you start capturi[...]

39 SCREEN menu Item Description MyScreen Lock Using the Ÿ / ź buttons turns on/off the MyScreen lock function. ON Ù OFF When the ON is selected, the item MyScreen is locked. Use this function for protecting the current MyScreen. • This function cannot be selected when the ON is selected to the MyScreen P ASSWORD item in SECURITY menu ( ?[...]

40 SCREEN menu Item Description SOURCE NAME Each input port for this projector can have a name applied to it. (1) Use the Ÿ / ź buttons on the SCREEN menu to select SOURCE NAME and press the Ź or ENTER button. The SOURCE NAME menu will be displayed. (2) Use the Ÿ / ź buttons on the SOURCE NAME menu to select the port to be named and press the [...]

41 SCREEN menu Item Description C.C. (Closed Caption) The C.C. is the function that displays a transcript or dialog of the audio portion of a video, fi les or other presentation or other relevant sounds. It is required to have NTSC format video or 480i@60 format component video source supporting C.C. feature to utilize this function. It may not wo[...]

42 OPTION menu OPTION menu OPTION menu From the OPTION menu, items shown in the table below can be performed. Select an item using the Ÿ / ź cursor buttons, and press the Ź cursor button or ENTER button to execute the item, except for the items LAMP TIME and FIL TER TIME. Then perform it according to the following table Item Description AUTO SEA[...]

43 OPTION menu Item Description AUTO OFF Using the Ÿ / ź buttons adjusts the time to count down to automatically turn the projector off. Long (max. 99 minutes) Ù Short (min. 0 minute = DISABLE) When the time is set to 0, the projector is not turned off automatically . When the time is set to 1 to 99, and when the passed time with no- signal o[...]

44 OPTION menu Item Description MY BUTT ON This item is to assign one of the following functions to MY BUTT ON 1/2 on the remote control (     6 ). (1) Use the Ÿ / ź buttons on the MY BUTT ON menu to select a MY BUTT ON - (1/2) and press the Ź button to display the MY BUTTON setup dialog. (2) Then using the Ÿ / ź / Ż / Ź bu[...]

45 OPTION menu Item Description SERVICE Selecting this item displays the SERVICE menu. Select an item using the Ÿ / ź buttons, and press the Ź button or the ENTER button on the remote control to execute the item. F AN SPEED Using the Ÿ / ź buttons switches the rotation speed of the cooling fans. The HIGH is the mode for use at highlands etc. N[...]

46 OPTION menu Item Description SERVICE (continued) KEY LOCK Using the Ÿ / ź buttons turns on/off the key lock feature. When ON is selected, the buttons on the projector except the ST ANDBY/ON button are locked. ON Ù OFF • Please use this function to prevent tampering or accidental operation. This function does not have any ef fect on the r[...]

47 SECURITY menu This projector is equipped with security functions. From the SECURITY menu, items shown in the table below can be performed. T o use SECURITY menu: User registration is required before using the security functions. Enter the SECURITY menu 1. Use the Ÿ / ź buttons on the SECURITY menu to select ENTER P ASSWORD and press the Ź but[...]

48 SECURITY menu Item Description MyScreen P ASSWORD The MyScreen P ASSWORD function can be used to prohibit access to the MyScreen function and prevent the currently registered MyScreen image from being overwritten. 1 T urning on the MyScreen P ASSWORD 1-1 Use the Ÿ / ź buttons on the SECURITY menu to select MyScreen P ASSWORD and press the Ź b[...]

49 SECURITY menu Item Description PIN LOCK PIN LOCK is a function which prevents the projector from being used unless a registered Code is input. 1 T urning on the PIN LOCK 1-1 Use the Ÿ / ź buttons on the SECURITY menu to select PIN LOCK and press the Ź button or the ENTER button to display the PIN LOCK on/ off menu. 1-2 Use the Ÿ / ź buttons[...]

50 SECURITY menu Item Description MY TEXT P ASSWORD The MY TEXT P ASSWORD function can prevent the MY TEXT from being overwritten. When the password is set for the MY TEXT ; • The MY TEXT DISPLA Y menu will be unavailable, which can prohibit changing the DISPLA Y setting. • The MY TEXT WRITING menu will be unavailable, which can prevent the MY [...]

51 SECURITY menu Item Description MY TEXT DISPLA Y (1) Use the Ÿ / ź buttons on the SECURITY menu to select the MY TEXT DISPLA Y and press the Ź button to display the MY TEXT DISPLA Y on/off menu. (2) Use the Ÿ / ź buttons on the MY TEXT DISPLA Y on/off menu to select on or off. ON Ù OFF When it is set ON, the MY TEXT will be displayed on [...]

52 Maintenance Maintenance Maintenance A lamp has fi nite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor . Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended. T o p[...]

53 Maintenance Lamp war ning Replacing the lamp (continued) HIGH VOL T AGE HIGH TEMPERA TURE HIGH PRESSURE Ź The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn [...]

54 Maintenance Please check and clean the air fi lter periodically . When the indicators or a message prompts you to clean the air fi lter , comply with it as soon as possible. Replace the air fi lter when it is damaged or heavily soiled. T o prepare a new air fi lter , make contact with your dealer and tell the air fi lter type number . T ype[...]

55 Maintenance Cleaning and replacing the air fi lter (continued) Ź Before taking care of the air fi lter , make sure the power cable is not plugged in, then allow the projector to cool suffi ciently . T aking care of the air fi lter in a high temperature state of the projector could cause an electric shock, a burn or malfunction to the projec[...]

56 T roubleshooting Other care In order to ensure the safe use of your projector , please have it cleaned and inspected by your dealer about once every year . 1. T urn the projector off, and unplug the power cord. Allow the projector to cool suffi ciently . 2. After making sure that the projector is cool adequately , lightly wipe the lens with a c[...]

57 T roubleshooting T roubleshooting T roubleshooting If an abnormal operation should occur , stop using the projector immediately . Otherwise if a problem occurs with the projector , the following checks and measures are recommended before requesting repair . If this does not resolve the problem, please contact your dealer or service company . The[...]

58 T roubleshooting R e garding the indicator lamps When operation of the LAMP , TEMP and POWER indicators differs from usual, check and cope with it according to the following table. POWER indicator LAMP indicator TEMP indicator Description Lighting In Orange T urned off T urned off The projector is in a standby state. Please refer to the section [...]

59 T roubleshooting Regarding the indicator lamps (continued) • When the interior portion has become overheated, for safety purposes, the projector is automatically shut down, and the indicator lamps may also be turned off. In such a case, disconnect the power cord, and wait at least 45 minutes. After the projector has suffi ciently cooled down,[...]

60 T roubleshooting Phenomena that may be easy to be mistak en for mac hine defects About the phenomenon confused with a machine defect, check and cope with it according to the following table. Phenomenon Cases not involving a machine defect Reference page Power does not come on. The electrical power cord is not plugged in. Correctly connect the po[...]

61 T roubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Phenomenon Cases not involving a machine defect Reference page Sound does not come out. The signal cables are not correctly connected. Correctly connect the audio cables. 9 The MUTE function is working. Restore the sound pressing MUTE or VOLUME + / - butto[...]

62 T roubleshooting Phenomenon Cases not involving a machine defect Reference page Pictures appear dark. The brightness and/or contrast are adjusted to an extremely low level. Adjust BRIGHTNESS and/or CONTRAST settings to a higher level using the menu function. 26 The ECO MODE function is working. Select NORMAL for the ECO MODE item in the SETUP me[...]

63 Specifi cations Specifications Specifi cations Specifi ca tion Item Specifi cation Product name Liquid crystal projector Liquid Crystal Panel 786,432 pixels (1024 horizontal x 768 vertical) Lens Zoom lens, f = 19 ~ 23 mm (approximately) Lamp 210W UHP Speaker 1W Power supply AC 100-120V/3.7A, AC220-240V/1.8A Power consumption 330 W T emperat[...]

64 Specifi cations Specifi cations (continued) [unit: mm] 317 288 98 11 3[...]

1 ENGLISH Projector CP-RX80 User's Manual (concise) Thank you for purchasing this projector . Please read through this manual before using this product, in order to use safely and utilize well the product. WARNING Ź Before using this product, be sure to read all manuals for this product. See “Using the CD manual” (  15 ) to read the ma[...]

2 Fir st of all Entries and gr aphical symbols e xplanation The following entries and graphical symbols are used for the manuals and the product as follows, for safety purpose. Please know their meanings beforehand, and heed them. Impor tant safety instruction The followings are important instructions for safely using the product. Be sure to follow[...]

3 ENGLISH R e gula tor y notices About Electro-Ma gnetic Interf erence In CANADA This Class B digital apparatus complies with Canadian ICES-003. In the US, and other places where the FCC regulations are applicable Declaration of Conformity T rade name HIT ACHI Model Number CP-RX80 Responsible Party Hitachi Home Electronics (America), Inc. Address 9[...]

4 Contents of pac ka ge Y our projector should come with the items shown below . Check that all the items are included. Require of your dealer immediately if any items are missing. (1) Remote control with two AA batteries (2) Power cord (3) Computer cable (4) User ’ s manuals (Book x1, CD x1) NO TE • Keep the original packing materials for futu[...]

5 ENGLISH Prepar a tions Loading batteries into the remote control Please insert the batteries into the remote control before using it. If the remote control starts to malfunction, try to replace the batteries. If you will not use the remote control for long period, remove the batteries from the remote control and store them in a safe place. 1. Hol[...]

6 On a horizontal surface Suspended from the ceiling • Keep a space of 30 cm or more between the sides of the projector and other objects such as walls. • For the case of installation in a special state such as ceiling mount, the specifi ed mounting accessories (  16 ) and service may be required. Before installing the projector , consult y[...]

7 ENGLISH VIDEO OUT AUDIO OUT RGB OUT RGB IN S-VIDEO OUT AUDIO IN L R AUDIO OUT Connecting your de vices Be sure to read the manuals for devices before connecting them to the projector . Make sure that all the devices are suitable to be connected with this product, and prepare the cables required to connect. Please refer to the following illustrati[...]

8 Connecting pow er supply 1. Put the connector of the power cord into the AC IN (AC inlet) of the projector . 2. Firmly plug the power cord’s plug into the outlet. In a couple of seconds after the power supply connection, the POWER indicator will light up in steady orange. Please remember that when the DIRECT ON function activated, the connectio[...]

9 ENGLISH Adjusting the projector's eleva tor When the place to put the projector is slightly uneven to the left or right, use the elevator feet to place the projector horizontally . Using the feet can also tilt the projector in order to project at a suitable angle to the screen, elevating the front side of the projector within 14 degrees. Thi[...]

10 Displaying the picture 1. Activate your signal source. T urn the signal source on, and make it send the signal to the projector . 2. Use the VOLUME + / VOLUME - buttons to adjust the volume. T o have the projector silent, press the MUTE button on the remote control. 3. Press the INPUT button on the projector . Each time you press the button, the[...]

11 ENGLISH T ur ning of f the pow er 1. Press the ST ANDBY/ON button on the projector or the remote control. The message “Power off?” will appear on the screen for about 5 seconds. 2. Press the ST ANDBY/ON button again while the message appears. The projector lamp will go off, and the POWER indicator will begin blinking in orange. Then the POWE[...]

12 R eplacing the lamp A lamp has fi nite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor . Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended. T o prepare a new lam[...]

13 ENGLISH HIGH VOL T AGE HIGH TEMPERA TURE HIGH PRESSURE WARNING Ź The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. In a[...]

14 Please check and clean the air fi lter periodically . When the indicators or a message prompts you to clean the air fi lter , comply with it as soon as possible. Replace the air fi lter when it is damaged or heavily soiled. T o prepare a new air fi lter , make contact with your dealer and tell the air fi lter type number . T ype number : NJ[...]

15 ENGLISH Using the CD manual The other manuals for this product are written into the included CD-ROM titled “User ’ s Manual (detailed)”. Before using the CD-ROM, please read the following to ensure the proper use. System requir ements The system for using the CD-ROM requires the following. Windows ® : OS:Microsoft ® Windows ® 98, Window[...]

16 Specifi cations Item Specifi cation Product name Liquid crystal projector Liquid Crystal Panel 786,432 pixels (1024 horizontal x 768 vertical) Lens Zoom lens, f = 19 ~ 23 mm (approximately) Lamp 210W UHP Speaker 1W Power supply AC 100-120V/3.7A, AC220-240V/1.8A Power consumption 330W T emperature range 5 ~ 35°C (Operating) Size 317 (W) x 98 ([...]

17 ENGLISH T r oubleshooting - W ar r anty and after-ser vice If an abnormal operation (such as smoke, strange odor or excessive sound) should occur , stop using the projector immediately . Otherwise if a problem occurs with the projector , fi rst refer to the “T roubleshooting” of the “Operating Guide” in the CD and run through the sugges[...]

1 Projector CP-RX80 User's Manual (detailed) Operating Guide – T ec hnical Resolution (H x V) H. frequency (kHz) V . frequency (Hz) Rating Signal mode 720 x 400 37.9 85.0 VESA TEXT 640 x 480 31.5 59.9 VESA VGA (60Hz) 640 x 480 37.9 72.8 VESA VGA (72Hz) 640 x 480 37.5 75.0 VESA VGA (75Hz) 640 x 480 43.3 85.0 VESA VGA (85Hz) 800 x 600 35.2 56.[...]

2 Initial set signals Initial set signals 7KH IROORZLQJ VLJQDOV DUH XVHG IRU WKH LQLWLDO VHWWLQJV 7KH VL JQDO WLPLQJ RI VRPH 3& PRGHOV PD EH GLIIHUHQW ,Q VXFK FDVH DGMXVW WKH LWHPV 9 326,7,21 DQG + 326,7,21LQ,0$*(PHQX FRPSXWHU Sign[...]

3 A COMPUTER IN, B MONITOR OUT 'VXESLQPLQLVKULQNMDFN 9LGHRVLJQDO 5*%VHSDUDWH $QDORJ9SS ȍWHUPLQDWHGSRVLWLYH +9 VQFVLJQDO77/ OHYHOSRVLWLYHQHJDWLYH &RPSRVLWHVQFVLJQDO77/ OHYHO 3LQ Signa[...]

4 C S-VIDEO 0LQL',1SLQMDFN 3LQ Signal 1 &RORUVLJQDO9SS176&EXUVWȍWHUPLQDWRU &RORUVLJQDO9SS3 $/6(&$0EXUVWȍWHUPLQDWRU 2 %ULJKWQHVVVLJQDO9SSȍWHUPLQDWRU 3 Ground 4 Ground Conn[...]

Hitachi Home Electronics (America), Inc., Business Group 900 Hitachi way , Chula Vista CA 91914-3556 USA T el: +1 -800-225-1741 Fax: +1 -619-591-5418 Ź http://www .hitachi.us/digitalmedia Hitachi Home Electronics (Canada), Inc., 2495 Meadowspine Blvd. Mississauga, Ontario L5N6C3 CANADA T el: +1 -905-821-4545 Fax: +1 -905-821-1 101 Ź http://www .h[...]