Honda P/N 08A15-1E1-000 manuale d’uso

1 P/N 08A15-1E1-000 XM RADIO OPERA TIN G INS TRU CTI ONS[...]

2 Gener al informat ion……………………………………. ..………….. 3 Initial Se tup…… ………………………………………………… ……6 Ope ratio n…………………………………. …………………………10 Tro ubleshooting…. .…………………………………………………14 Infor mati[...]

3 The XM service is based on two satellites that have fixed positions over the equator . One satellite for the east coast of the United S tates and the other for the west coast. The two satellites continuously broadcast radio signals throughout the continental United S tates. The XM service also uses ground-based antennas that broadcast into areas [...]

4 Satellite signals are received best in the areas where there are no tall buildings, trees or tall objects that can obstruct the signals. Locations where satellite signals are received easily There may be ground-based coverage in some of these areas that will provide uninterrupted service of satellite radio. The XM radio will not operate only when[...]

5 Sound in your car The signal is broadcast in a digital format so that if you do run into a situation where both the satellite antenna and the ground-based antenna lose the signal the sound will drop off completely . This condition would result in no static and may sound as though the unit were shut off. As soon as the obstruction is cleared or a [...]

6 T urning power on and off 1. Press the SOURCE POWER button to turn the unit on. NOTE: The unit can be turned on by pressing any of the buttons of the display module. 2. Press and hold the SOURCE POWER button for 2 seconds or more to turn the unit off. NOTE: When turning the unit on and off with the POWER button. Be sure to lower the volume level [...]

7 Modulator frequency setting 1. Press and hold the DISP SETUP for 2 seconds or more. 2. T urn the rotary encoder or press the 6 or 5 button to select the frequency setting mode (displays the frequency of the desired modulation station). 3. Press the 7 or 8 button to set the frequency . 4. The frequency is varied by 200kHz (0.2MHz) steps from 87.7 [...]

8 XM level setting (XM output level) When your XM receiver is connected to the factory installed radio, this feature will allow the user to choose between 4 levels of output (XM level 1 to 4) to better match the output level of the Honda/ Acura radio. 1. Press and hold the DISP/SETUP button for 2 seconds or more. 2. T urn the rotary encoder or pres[...]

9 Scrolling feature This feature allows the broadcast text information such as artist, song tittle and station information to move continuously across the screen. This is the default setting however this feature can be disabled if the user prefers no scrolling. Below shows how to disable or enable this feature. 1. Press and hold the SETUP button fo[...]

10 Receiving XM channels with the XM receiver 1 . T urn the vehicles radio on to FM and tune to the XM radios modulator fre- quency (between 88.7 to 89.9). Refer to page 7 for how to set XM radios modulator frequency . 2 . Press the POWER button of the display module to turn the XM radio on. 3 . T urn the rotary knob to display the desired[...]

11 S toring XM channel preset s 1. Af ter tuning in the desired channel, press and hold the rotary knob for 2 seconds or more until the channel name on the display blinks. 2. T urn the rotary knob to select the preset number you want to store. 3. Press the rotary knob within 5 seconds once when the correct preset number is dis- played. 4. Repeat th[...]

12 Category search Category search functionally allows you to search for a specific channel by the category of pro- gramming it offers, or to surf within a category . 1. Momentarily press the rotary knob to display the category of the channel that is cur- rently selected. 2 . While the category is displayed, turn the rotary knob to select a dif fer[...]

13 Changing the display T ext information, such as the channel name, artist name/feature, and song/program tittle, is available with each XM channel. This unit can display this text information as explained below 1. Press the DISP SETUP button. Each time you press the button, the display changes as shown below . Channel na me dis pl a y Artist name[...]

14 If you encounter a problem, please review the items listed below . This guide will help you to isolate the problem. Make sure the rest of your system is operating properly . If necessary consult your local authorized Honda dealer . SYMPTOM CAUSE SOLUTION XM r adio will not operate. Ignition switch is in the off position. Turn Ignition to the on [...]

15 • The XM antenna is not connected to the XM radio module - Check whether the XM antenna cable is att ached securely to the XM radio module. UPDATI NG • XM radio is being updated with the latest encryption code. - W ait until encryption code is fully updated. Channel 0 and 1 should function normally . • XM signal is too weak at the current [...]

16 • XM radio is acquiring audio or program information - W ait until the radio has received the information • The channel currently selected has stopped broadcasting. - Select another channel. • The user selected a channel number that does not exist or is not subscribed to. - The unit will revert back to the previously selected channel. • [...]

17 RF MODULA T OR UNIT RF Output Frequency (selectable) 87.7-89.9 MHz RF Output V oltage 70 dBµV RF Modulator input Sensitivity/Impedance 500mV/10 k Ohms Recommended Operating voltage 13.4 Vdc Recommended T emperature range 14°F 140F° (-10°C -+60°C) DISPLA Y MODULE Width 1 13 mm (4-7/16) Height 39 . 5mm (1-9/16) Depth 19 mm (25/32)[...]

18 REF . NO. MR0HL210 08A15-1E1-000-81 Printed in U.S.A © 2003 American Honda Motor Co., Inc - All Rights Reserved.[...]