Honeywell 6100 manuale d’uso

Dolphin ™ 6100 Mobile Computer with Windows ® Embedded Handheld 6.5 User’s Guide[...]

Disc laimer Honeyw ell International Inc. (“HII”) reser v es the right to make changes in specifications and other inf or- mation contained in this document without prior notice , and the reader should in all cases consult HII to deter mine whether an y such changes ha v e been made. The inf ormation in this publication does not rep- resent a c[...]

iii Chapter 1 - Agency Approvals Label Locations ................................................. ............................................................... ....1-1 Safety & RF Approvals by Country: ................ ........................................ .............................1-2 Dolphin RF Terminal—802.11b/g and/or Bluetoot h [...]

iv Function Key Combinations ................................ ................................................................. 4-3 CTRL Key Combinations .................................... ................................................................. 4-4 Program Buttons ................................................. .......................[...]

v Connections Manager .......................................... ............................................................... 8-4 To Access the Connections Manager ............. ....................................... ........................ 8-4 Tasks ..............................................................................................[...]

vi Parts and Functions .......................................... .................................. ............................... 1 2-2 Front Panel ................................... ............................................................................... 12 -2 Back Panel ..................................................... ............[...]

1 - 1 1 Agency Appr ov als Label Locations Dolphin 6100 mobile computers meet or exceed the requirements of all applicable standards organizations for safe operation. However, as with an y electrical equipment, the best way to ensure safe operation is to operate them according to the a gency guidelines that follow. Read these guidelines carefully b[...]

1 - 2 Safety & RF Appr ov als by Country: * Does not apply to IS4813 laser engine. R&TTE Compliance Statement—802.11b/g and/or Bluetooth Dolphin RF terminals are in conformity with all esse ntial requirements of the R&TTE Directive (1999/5/ EC). This product is marked with in accordance wi th the Class II product requirements specifie[...]

1 - 3 Laser Safety Label If the following label is attached to your product, it indicates the product contains an imager engine with a laser aime r (5300) or a laser engine (IS4813). Laser Eye Safety Statement: This device has been te sted in accordance with and complies with IEC60825-1: 1993+A1+A2 and 21 CFR 1040.10 and 1040.11, except for deviati[...]

1 - 4 This device and its antenna must not be co-loc ated or operating in conjunction with any other antenna or transmitter. To maintain compliance with FCC RF exposure guidelines for body- worn operation, do not use accessories that contain metallic components. CAUTION! Any changes or modifications not expressly ap proved by the grantee of this de[...]

2 - 1 2 Getting Star ted Out of the Bo x Verify that your carton c ontains the following items: • Dolphin 6100 mobile computer (the terminal) • Main battery pack (3.7v, Li-Ion) • AC power supply • Localized plug adapters Note: Be sure to keep the original packaging in case you need to return the Dolphin terminal for service; see Customer Su[...]

2 - 2 Step 2. Charge the Batteries We recommend use of Honeywell peripherals, po wer cables, and power adapters. Use of any non- Honeywell peripherals, cables, or power adapters may cause damage not covered by the warranty. Ensure all components are dry prior to mating terminal s/batteries with peripheral devices. Mating wet components may cause da[...]

2 - 3 The power adapter on the power cable converts the voltage from the power source to 5 volts DC. Only power adapter cables from Honeywell convert the volt age appropriately. The powe r cable contains a plug adapter for each geography (US, UK, EU, etc.). Step 3. Boot the Terminal The terminal begins booting as soon as power is ap plied and runs [...]

2 - 4 Home Screen After the Dolphin ter minal initializ es the first time, y ou see the Home screen. T ap to reach the Star t screen from the home screen. T ap to access the Dolphin Wireless Manager Window (see page 8-7) from the home screen. For more information about the touch screen, see Touch Screen Display on page 3-2. Title Bar The Title bar [...]

2 - 5 Horizontal Scr oll Indicator Meaning Synchronizing data The term inal could not synchroniz e data with the workstation via ActiveSync. New e-mail New te xt message New v oicemail New instant message Ringer off A batter y error has occurred. Replace the main battery pack with a Hone ywell Li-poly or Li-ion batter y pac k. Batter y is has a ful[...]

2 - 6 The Horizontal Scroll, located at the top of most application windows , provides access to additional application screens. Y ou can flick left or right on the scroll or tap each label on the scroll, until yo u get to the desired screen. T apping a label to the left or righ t of the center item br ings ne w labels into view . Note: Tap the Tit[...]

2 - 7 File Explorer Y ou can also use the File Explorer to find files and organize these files into f olders. 1. Tap > File Explorer . 2. Tap the Up button at the bottom of the screen to move up one level in the directory. 3. You can move files in File Explorer by tapping and holding on the item you want to move, then tapping Cut or Copy on popu[...]

2 - 8[...]

3 - 1 3 T e rminal Har d ware Over vie w Dolphin 6100 terminals include a number of standard terminal configurations as well as charging and communication peripherals and accessories to maxi mize the efficiency of your application setting. Standar d T erminal Configurations There are two standard Dolphin 6100 configurations: WPAN only and WPAN/WLAN[...]

3 - 2 Fr ont P anel Features Scan/Decode LED The LED lights red when you press the Sc an trigger in scanning applications. The LED lights green when a scanned bar code is successfully decoded. The LED lights red while the main battery is charging. The LED lights green when the main battery charging has completed. The LED lights blue or red during s[...]

3 - 3 For touch screen input, use the stylus included with the terminal or your finger. The method you choose depends on which one is most approp riate for your application. While there is a great deal of variation in different applicatio ns, you generally achieve greater accuracy with the stylus for buttons or icons that are close together. Use of[...]

3 - 4 Removing the Screen Pr otector Dolphin 6100s ship with a touch screen protector alre ady installed. To replace the screen protector, you must remove the one already installed. 1. Press the red Power button to suspend the 28-key unit or press the Blue then Z (Power) keys to suspend the 52-key unit. 2. Using a strong, flat, plastic card (e.g., [...]

3 - 5 4. Align the exposed edge of the screen protector along the left edge of the touch panel. Make sure that it lies flush with edges of the touch panel. Note: To reposition the screen pr otector, lift up gently and reapply. 5. Use the card on top of the screen protector to smooth it out as you pull on the backing paper. Screen Protector Backing [...]

3 - 6 6. Pull smoothly and evenly from left to right unt il the screen protector is applied. Press gently but firmly. Use the card as necessary to smooth out any air pockets or bumps after application. 7. Press the Power key to wake the terminal and check the touch panel with the stylus. 8. Verify that the screen accepts input from the styl us as u[...]

3 - 7 12. For maximum performance, recalibrate the screen. Tap > Settings > System > Screen > Align Screen . 13. Tap Recalibrate and follow the instructions on the screen.[...]

3 - 8 Bac k P anel Features Hand Strap The Dolphin 6100 comes with an adjustable, elastic hand strap. The strap is attached to the device with the two small screws. It is threaded through the slot on the bottom of the back of the unit. Keep in mind that the hand strap covers the ba ttery. When you want to replace the battery, you will need to adjus[...]

3 - 9 Left Side P anel Features Side Button There is a button like this on both side pane ls. You can use the Program Buttons option to change the functionality of the side buttons. Tap > System > Settings > Program Buttons . Side Door The rubber door on the left side panel provides access to the Micro SD slot. When closed, the side door s[...]

3 - 10 Right Side P anel Features Headset Jack The rubber door on the right side panel provides access to the headset jack. This is a 2.5mm audio jack that supports a headset wi th a mono speaker and microphone. When closed, the side door seals the terminal from moisture and particle intrusion thus preserving the terminal’s environmental rating. [...]

3 - 11 Bottom P anel Features DC Power Jack The DC power jack receives external power from the Dolphin power cable that is included in the box with the terminal. When connected to the Dolphin power cable, the terminal is powered and the main battery pack is charging. I/O Connector The I/O mechanical connector is designed to work exclusively with Do[...]

3 - 12 Dolphin HomeBase ™ Device This charging and communication cradle supports USB and RS-232 communication, enabling your terminal to interface with the majority of enterprise systems. When a terminal is seated in a powered base, its main battery pack charges in an average of 5 1/2 ho urs for a fully depleted battery. It takes less time if the[...]

3 - 13 Main Battery P ack Caution:We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty. There are two Li-ion battery packs available for the 6100: Standard Capacity: Li-ion 3.7V/2200mAh/8.1Wh Extended Capacity: Li-ion 3.7V/3300mAh/12.2Wh The Li-Ion battery pack is the [...]

3 - 14 Managing Main Battery P ower Data and files saved on the Dolphin terminal may be stored in RAM memory; therefore, maintain a continuous power supply to the term inal to help prevent data loss. When you remove a battery pack, insert another charged battery pack in the Dolphin. If the ma in battery pack is low, insert the terminal into a charg[...]

3 - 15 • If you observe that the Honeywell battery supplied is physically damaged in some way, send it to Honeywell International Inc. or an authorized service center for inspection. Refer to the Technical Assistance (page 13-1) section of this guide. • Although your battery can be recharged many times, it will eventually be depleted. Replace i[...]

3 - 16 You would perform a soft reset 1) when the termina l fails to respond, 2) after installing software applications that require a reboot, 3) after making changes to certain sys tem settings, or 4) to install new CAB or REG files. The desktop appears when th e Soft Reset is complete. Hard Reset (Cold Boot) Warning:A hard reset erases all of the[...]

3 - 17 Dolphin 6100 T echnical Specifications Operating System Microsoft Windows Embedded Handheld 6.5 Development En vironment Honeyw ell SDK f o r Windo ws Embedded Handheld 6.5 Application Software Honeyw ell Po wer T ools and Demos Processor Marvell PXA 300 624MHz Memory 256 MB RAM X 256 MB Flash Expansion Memory User accessible Micro SD memory[...]

3 - 18 WLAN Security WEP , 802.1x, LEAP , TKIP , MD5, EAP-TLS, EAP-TTLS, WP A-PSK, WP A v2.0, and PEAP Operating T emperature 14° to122°F (-10° to 50°C) Charging T emperature 32° to 104°F (0° to 40°C) Storage T emperature -4° to 158°F (-20° to 70°C) Humidity 95% humidity , non-condensing Construction High impact resistant PC/ABS housing[...]

4 - 1 4 Using the K eypad Overview Navigation K eys Located in the center of the keypad for easy access with either hand, the navigation keys enable you to move the cursor up and down lines and from character to character. Navigation keys Po we r k ey[...]

4 - 2 Basic Ke ys Alpha/Numeric Modes The keypad defaults to numeric mode. Use the ALPHA key to toggle between numeric and alpha modes. Pressing the ALPHA key locks the keypad in numeric mode, al pha mode (lowercase), or alpha mode (uppercase). The Title Bar on the screen displays an icon indi cating the alpha/numeric status of the keypad. Alpha In[...]

4 - 3 Function Ke y Combinations The Function key (FUNC) modifies the next key pressed to perform specific functions. The keypad is color-coded in blue to indicate these key combinations. Note: The color-coded indicators are located below each key. Ke y Combination Function FUNC + 1 F5 FUNC + 2 F6 FUNC + 3 F7 FUNC + 4 T oggle the wireless radio on [...]

4 - 4 CTRL Ke y Combinations The Control key (CTRL) modifies the next key pressed to type specific characters. The keypad is color- coded in yellow to indicate these key combinations. Note: The color-coded indicators are located below each key. Pr ogram Buttons Buttons can be programmed to execute different f unctions using the Program Button progr[...]

5 - 1 5 Using the Image Engine Overview The Dolphin 6100 houses a compact image engine using Adaptus ™ Imaging Technology that instantly reads all popular 1D and 2D bar codes and supports omni-directional aiming and decoding. The image engine can also capture digital images , such as signatures and pictures. A v ailable Image Engines The Dolphin [...]

5 - 2 Suppor ted Bar Code Symbologies Symbology T ype Symbology Name 1D Symbologies Codabar Code 3 of 9 Code 11 Code 32 Pharmaceutical (P ARAF) Code 93 Code 128 EAN with Add-On EAN with Extended Coupon Code EAN-13 GS1 Databar Interleav ed 2 or 5 Matrix 2 of 5 Plessey P osiCode Straight 2 of 5 IA T A Straight 2 of 5 Industrial T elepen T r ioptic Co[...]

5 - 3 Activ a ting the Engine When a scanning application is open, press the Scan key to activate the image engine. Using Demos Dolphin Demos are software utilities loaded on Dolphi n terminals that demonstrate the advanced features of the terminal. There are two Demos that featur e the image engine: Image Demo and Scan Demo. To access these demos,[...]

5 - 4 Omni-Directional Scanning P ositions The high-vis aiming pattern frames the bar code to provide you with the best scanning performance. Note: To achieve the best read, the aiming beam shoul d be centered horizontally across the bar code. The aiming pattern is smaller when the terminal is held closer to the code and larger when the terminal is[...]

5 - 5 6. By default, the image is saved to th e My Documents folder in My Device. To save the image to another location, tap File > Save As . High-Vis Aiming P atter n If your Dolphin terminal is configured with the 5300SR imager, you can enable the aiming pattern for imaging in the Image Demo application. 1. Tap > Demos > Image Demo > [...]

5 - 6[...]

6 - 1 6 Using the Laser Engine Overview The Dolphin 6100 (IS4813 laser version) contains a laser diode that emits a beam toward an oscillating mirror that scans through the code and the reflecte d light is bounced off of two mirrors back to the collector. The 6100 Laser reads all popular 1D bar codes. A v ailable Laser Engines The Dolphin 6100 can [...]

6 - 2 Activ a ting the Engine When a scanning application is open, press the Scan key to activate the laser engine. Using Demos Dolphin Demos are software utilities loaded on Dolphi n terminals that demonstrate the advanced features of the terminal. To access these demos, tap > Demos . •S e l e c t Scan Demo to verify decoding, or Decoding a B[...]

7 - 1 7 System Settings Overview Customized settings are a vailab le on the System Settings menu. T ap > Settings and the settings screen opens. Icon Description Bluetooth Configures the Bluetooth radio . See Enabling the Bluetooth Radio on page 9-1. Clock & Alarms Set the system clock, date , time and schedule alar ms. See Clock & Alarm[...]

7 - 2 Cloc k & Alarms The Clock & Alarms settings can be accessed from the Home screen or the Settings Menu. 1. On the Home screen, tap the line that displays the time and date OR Tap > Settings > Clock & Alarms , 2. The Clock Settings screen appears. This settin g sets the system clock. All scheduled items run according to this s[...]

7 - 3 P ersonal Men u T o access the P ersonal Menu, tap > Settings > P ersonal . The screen opens displa ying the P ersonal Menu. Buttons The Buttons setting programs certain keyboard b utt ons to launch applications or ex ecute commands. Icon Description Buttons Program the side b uttons to perform specific tasks. See Buttons on page 7-3. O[...]

7 - 4 Changing Button Assignments 1. Tap > Settings > Personal > Buttons . Note: The buttons that appear on this window are the onl y buttons that can be programmed via the Buttons setting. You cannot add buttons to this window. 2. To change button assignment, tap on the name of the button in the Button column, and then select a program or[...]

7 - 5 Using File Explorer If you do not see the prog ram listed, you can either us e File Explorer to mo ve the progr am or ActiveSync on the workstation to create a shor tcut to the prog r am and place the shor tcut in the Star t Menu folder . Note: We recommend that you Copy and Paste Shortcut so t hat you do not alter your program configurations[...]

7 - 6 3. Navigate to the Windows folder and open the Start Menu ( My Device > Windows > Start Menu > Programs ), tap and hold a blank area of the window, and tap Paste Shortcut on the pop-up menu. Note: If there is no blank space available in the window, tap on Menu > Edit > Paste Shortcut . 4. Tap to verify that the program now appe[...]

7 - 7 System Menu The System menu enab les you to v er ify and sometimes alter system parameters . T o access the System menu, go to > Settings > System . T ap the appropr iate icon to open that system setting. Icon See P age About See About on page 7-8. Backlight See Backlight on page 7-8. Pow e r See Power on page 7-12. Certificates See Cer[...]

7 - 8 About The About system setting displa ys specific informat ion about the ter minal. It contains three screens: Version Screen Displays the information about the software, operating system, and processor. Device ID Screen Displays the information the terminal uses to ident ify itself to other devices. It can be important to know this informati[...]

7 - 9 Ta p > Settings > System > Backlight . The On Battery tab deter mines the bac klight timeout when the ter minal is running on batter y powe r . The On External tab determines the backlight timeout when the ter minal is running on e xter nal pow er . The options on the On Battery and On External tabs are the same. Turn off backlight: [...]

7 - 10 Encryption Encr yption giv es you the option of encrypting files pl aced on storage cards so that those files cannot be read by an y other device . Error Reporting Error Repor ting giv es you the option of enab ling or disabling the error repor ting function of Windows Embedded Handheld 6.5.[...]

7 - 11 External GPS Exter nal GPS determines which por t a third-par ty GPS software application can use to access the GPS receiv er . Note: You need the installation parameters from the GPS manufacturer to configure the connection. Managed Programs Managed Programs are a list of prog rams that are managed if enrolled to enter prise domain. Managed[...]

7 - 12 Po w e r P ow er system settings contains four tabs: Battery , Advanced, CPU P ower Setting, and W akeup Source . Ta p > Settings > System > P o wer . Storage Card Screen This screen displa ys the current capacity and usage sta- tistics of the selected memor y type: Storage Card. T otal storage card memory = The total MB of memor y [...]

7 - 13 Note: When the terminal “powers off”, it enters Suspend Mode (see page 3-16). Deter mines po wer time-outs. Fo r On battery power , select from the drop-do wn list, the number of minutes of inactivity y ou want to pass bef ore the ter minal po wers off when running on batter y power . Fo r On external po wer , select from the drop-down l[...]

7 - 14 Regional Settings Regional Settings enables y ou to customize the appe arance and f ormatting to your geogr aphic region. Specifically , you can customize n umbers (i.e., n umber of decimal places allow ed), currency (i.e.,using the $ or € € symbol), time, and date . These specifications ap ply to all screens, including the Home screen. [...]

7 - 15 2. Tap Remove . The following message appears: 3. Tap Yes . Wait while the program is removed. 4. Verify that the program no longer appears in the list.[...]

7 - 16 Screen The Screen system setting contains three scr eens: General, Clear T ype , and T ext Siz e. General Screen Orientation The General screen enab les you to set the dynamic screen rotation. Three choices of screen orientation are suppor ted: P or trait, Landscape (right-handed), and Landscape (left- handed). Align Screen The General T ab [...]

7 - 17 T ask Manager The T ask Manager provides inf or mation about applicat ions and processes running on y o ur mobile com- puter . Y ou can use the T ask Manager to monitor the me mor y and CPU usage of specific applications and processes. Chec k the T ask Manager when you are receiving out of memory errors or when the mobile computer is running[...]

7 - 18 Using the T ask Manager Applications T o view the status of the programs running on y our mobile computer , tap the Menu button at the bottom of the screen, then tap View > Applications . F rom the application list, you can: • Tap and hold on an application, then tap Switch To on the pop-up menu. • Tap and hold on an application, then[...]

8 - 1 8 Comm unication Connecting the Dolphin 6100-USB Comm unication Cable To facilitate USB communication between the Dolp hin terminal and the host workstation, you may connect your unit to a host by using either the optional Dolphin 6100-USB Communication Cable or HomeBase. If you use the Communication Cable, sl ide the cable unit onto the bott[...]

8 - 2 2. Select the USB charging option (100mA or 500mA). If you do not disconnect the cable, the option will be grayed out. 3. Re-connect the cable.[...]

8 - 3 Connections Menu The Connections system setting provides access to the terminal’ s v ar ious wireless communication options. Note: All server-assigned IP addresses use Dy namic Host Configuration Protocol (DHCP). Icon Tapping this icon… Connections Opens Microsoft’ s connections manager . Dolphin Wireless Manager Manages the wireless ra[...]

8 - 4 Connections Manager Microsoft’ s Connections Manager sets up multiple netw ork connections to Inter net Ser vice Pro viders (ISPs) via e xter nal modem. Do NOT enter connection parameters in the Connections Manager if: • you are using one of the on-board wireless radios to connect to a network. The Dolphin terminal uses the settings from [...]

8 - 5 • Proxy server connection Note: If you are connected to your ISP or private net work during synchronization, the terminal should download the proper proxy settings during synchronization with the work station. If these settings are not on your workstation or need to be changed, ask y our ISP or network administrator for the proxy sever name[...]

8 - 6 Dolphin Wireless Manager The Dolphin Wireless Manager provides a centr alized interf ace that enables and disab les all the on- board radios . Each radio has its own configuratio n prog ram. The Dolphin Wireless Manager also pro- vides shor tcuts to the configuration utilities f or each radio . Ta p on the Home screen to access the Dolphin Wi[...]

8 - 7 Dolphin Wireless Manager Window Enabling the Radios 1. T ap on the Home screen to access the Dolphin Wireless Manager . 2. Tap anywhere inside the rectangle of the radio you want to enable. 3. The radio begins activating. 4. When the radio is activated (i.e., transmitting a signal), the OFF button changes to ON . Note: If applicable, informat[...]

8 - 8 Accessing Radio Configuration Utilities Each radio has its o wn configuration utility that y ou can access by tapping Menu on the tile bar . Radio T ype Menu Option 802.11/b/g Ta p WLAN Settings and the Honeyw ell WLAN Secur ity Supplicant opens . The Honeyw ell WLAN Secur ity Supplicant User’ s Guide is av ailable f or download from the Do[...]

8 - 9 Netw ork Cards The Network Cards screen allows y ou to set and configure the type of Networ k Adapter the Netw or k card in the ter minal uses . Y ou can modify the adapte r settings (e.g., Name Servers or IP address) b y tapping on the adapter type or hi ghlighting the adapter and tapping Edit at the bottom of the screen. Connecting and Sync[...]

8 - 10 • Select which information types are synchronized, controlling how much data is synchronized. For example, you can choose how many weeks of past appointments you want synchronized. Comm unication T ype The Dolphin 6100 supports the following type of communication via ActiveSync through its DC Power Jack (see page 3-11) on the bottom panel:[...]

8 - 11 Synchr onizing with the Host W orkstation After setup , synchronization begins automatically whenev er the ter minal’ s mechanical connector con- nects to a Dolphin peripheral that is connected to a host workstation with ActiveSync or Windo ws Mobile De vice Center installed. For additional inf or mation visit the Microsoft Phone Web site [...]

8 - 12 1. Download the program to the workstation from eith er the Internet or the install CD. You may see a singe *.exe or setup.exe file, a *.cab file, or a *.dll file. Note: There may be several versions of files for different device types and processors. Select the file that matches the terminal’s processor. 2. Read any installation instructi[...]

8 - 13 Connecting the T erminal to a Wireless Network Y ou connect the ter minal to a wireless network through the on-board radio (802.11b/g, Bluetooth). Each radio has its o wn configuration utility and requires sp ecific inf or mation about the wireless network to con- nect. Successful connection depends on y our network infrastructure about whic[...]

8 - 14 T o pre vent data loss, bac k up all user data to an SD card or e x ternal memor y de vice bef ore perf or ming an upgra de. Note: An active Microsoft ActiveSync or Windows Mobile Device Center connection between a host workstation and the Dolphin terminal may be required for some types of software upgrades. For additional information, see C[...]

9 - 1 9 W orking with the Bluetooth Radio Enabling the Bluetooth Radio Y ou enable the Bluetooth radio in the Dolphin Wireless Manager (see page 8-6). 1. T ap on the Home screen to access the Dolphin Wireless Manager . 2. Tap anywhere inside the Bluetooth rectangle and Bluetooth begins activating. 3. When the radio is activated (i.e., transmitting [...]

9 - 2 P airing and T rusted Devices The ter minal does support pair ing. P airing happens du r ing general connection setup . P aired de vices are "trusted" devices . This means that there is unrestr ic ted access to all services (including ser vices that require authorization and authentication). A connection can e xclude pair ing. A de [...]

9 - 3 4. Select a device from the list and tap Next . 5. You are prompted to enter a passcode. • If the device has a specific passcode, enter it in the Passcode field and tap Next . When attempting to connect to a printer or head set with Bluetooth capabilities, the passcode may default to either 1111 or 0000. If there is no def ault, consult the[...]

9 - 4 8. When the connection is complete, a list of matchi ng and supported services on the device appears. Only the services that are mutually supported on both devices appear in the Partnership Settings window. 9. Select the services you want to use and tap Save . The services on the new devices have to be sele cted or the pairing won’t include[...]

9 - 5 4. The Bluetooth radio begins searching for devices. 5. Tap the device to begin sending the selected file. 6. While trying to connect, the selected device reads “Pending”. 7. When the file is being transferred, the selected device reads “Sending”. When a Bluetooth de vice is first f ound, it appears as an Unknown de vice; the icon ind[...]

9 - 6 Making the T erminal Discoverab le By def ault, the Dolphin ter minal is not discov erab le, which means that the terminal will not be found b y other Bluetooth de vices. T o make the terminal discov erable , tap Mode on the Horizontal scroll. Select Make this device visib le to other devices and tap OK .[...]

10 - 1 10 Dolphin HomeBase/eBase De vice Overview Note: The information in this chapter applies to both the Dolphin HomeBase and Dolphin eBase devices unless otherwise indicated. As the hub of your Dolphin 6100 system, the Dolp hin HomeBase charging and communication cradle supports full-speed USB 1.1 and RS-232 communicati on with a workstation. T[...]

10 - 2 Fr ont P anel Terminal Well Place the Dolphin terminal in the terminal well to communicate with a host device, power the terminal, and charge the terminal’s battery. Make sure that the device is securely seated. Rubber Feet The bottom panel has four rubber feet to stabilize the unit on a flat surface. You can set the base on a dry, stable [...]

10 - 3 Bac k P anel DC Power Jack Connect the power cable to this power jack; see Powering the Dolphin HomeBase Device on page 10-4. USB Port The USB port is full-speed (v1.1). Using the USB cable, you can connect the base to a USB- compliant device to facilitate USB communi cation to and from the terminal. USB communication occurs through Microsof[...]

10 - 4 P owering the Dolphin HomeBase De vice The terminal requires 5 volts DC input for communica tion and battery charging; the power adapter on the power cable converts the voltage from the power sour ce to 5 volts DC. Only power adapter cables from Honeywell convert the voltage appropriately. The same power cable that ships wi th each terminal [...]

10 - 5 The following illustration shows how to install the ferrite on the cable. It should be placed approximately 1.57 inches (40mm) from the RJ45 plug. The ca ble should be looped aro und the core, as shown. Charging the Main Battery The base powers the terminal and fully charges its main battery pack in an average of 5 1/2 hours for a fully depl[...]

10 - 6 Charging a Spare Battery The base can also charge a second battery while th e terminal is positioned in the base. The second battery can be inserted in the battery charging well in back of the terminal connection. Place the battery in the well with the label facing up and toward the back of the unit. Angle the battery as shown. Once the conn[...]

10 - 7 T echnical Specifications Structural Dimensions 5.3 in. high X 4.5 in. wide X 3.1 in. deep (13.5 cm. X 11.4 cm. X 7.9 cm.) We ig h t Dolphin HomeBase - 11.0 oz. (313g) Dolphin eBase - 11.3 oz (320g) Material P olycarbonate Color Black En vironmental Operating T emperature 14° to 122°F (-10° to +50°C) Storage T emperature -4° to 158°F ([...]

10 - 8[...]

11 - 1 11 Dolphin QuadChar ger Device Overview The Dolphin QuadCharger device is a four-slot charging station that charges up to four Li-ion battery packs in an average of 5 1/2 hours for a fully depleted battery. It takes less time if the battery has some charge. For more details about charging, see Battery Charging on page 11-2. We recommend use [...]

11 - 2 Power Supply Connector Use this connector to attach the pow er supply to the charger. The un iversal power supply accepts input voltages between 90–265 volts. Battery Charging Charging Process This charger charges Dolphin 6100 Li-Ion 3300mAh pack s in an average of 5 1/2 hours for a fully depleted battery. It takes less time if the battery[...]

11 - 3 3. When the Status LED turns green, the ba ttery in the slot has completed charging. Recommendations f or Storing Batteries To maintain top performance from batte ries, follow these storage guidelines: • Avoid storing batteries outside of the specified tem perature range of -4 to 104°F (-20 to 40°C) or in extremely high humidity. • For[...]

11 - 4 T echnical Specifications Structural Dimensions 7.3 in. long X 3.7 in. wide X 2.4 in. high (18.5 cm. X 9.4 cm. X 6.1 cm.) We ig h t 11.5 oz. (325g) Material Case: P olycarbonate Color : Blac k Capacity Suppor ts up to f our Li-Ion batter y packs En vironmental Operating T emperature 32° to 104°F (0° to 40°C) Storage T emperature -4° to [...]

12 - 1 12 Dolphin 6100 Net Base Device Overview The Net Base enables up to f our Dolphin 6100 mobi le computers to communicate with a host de vice ov er an Ether net network. In addition, the Net Base provides a second RJ45 Ethernet por t f or connec- tion to an additional de vice such as a pr inter , w or kstation, eBase , or another Net Base. We [...]

12 - 2 P ar ts and Functions Front P anel Terminal Wells The Net Base contains four terminal wells. Ea ch well has its own dedicated Power/Dock LED and COMM LED indicator. Place the Dolphin terminal in any one of the four wells to communicate with a host device, power the terminal, and charge the installed battery pack. The Net Base completely char[...]

12 - 3 Back P anel DC Power Jack Use the power cable from Honeywell that comes with the Net Base to supply power to this power jack. For more information, see Power on page 12-4. RJ45 Ethernet Ports The Net Base contains two RJ45 Ethernet ports. You can connect the Net Base to an Ethernet- compliant device to facilitate Ethernet communica tion to a[...]

12 - 4 Bottom P anel F or details on how to mount the Net Base, see Mounting the Net Base on page 12-6. Po w e r The ter minal requires 12 V olts DC input f or commun ications and batter y charging; the po wer adapter on the pow er cab le conv er ts the vo ltage from the pow er source to 12 v olts DC . Only the Honeyw ell 12V/ 8.5A pow er supply pr[...]

12 - 5 Charging the Main Battery The base provides po wer to the Dolphin ter minals and allo ws the charging of the main batteries in th e ter minals. The main battery of each ter minal charges in 4 hours f or the standard 3.7V batter y or 6 hours f or the extended 3.7V battery . The intelligent batter y charging system incor porated into all Dolph[...]

12 - 6 4. Insert the Dolphin into one of the terminal wells. The DOCK LED for the well changes from red to green and the connection icon on the Dolphin’s title bar changes from to . 5. By default, the DHCP server assigns a unique IP address to each of the Dolphin terminals docked in the Net Base. This IP address can be used by any application on [...]

12 - 7 Desk Mounting The DIN Rail (7.5 X 35 mm) slot on the bottom pane l enables secure mounting on a horizontal surf ace. Hardware Required • 3/16 in. dia x 5/8 in. long pan head screw • 1/2 in. OD x 7/32 in. ID x 3/64 in. thick • 3/16 in. dia nut Installing the DIN Rail 1. Slide the DIN Rail into the DIN Rail slot on the bottom panel of th[...]

12 - 8 Hollow Wall Installation 1. Drill four pilot holes in the wall using a 7/8 in. drill bit. 2. Slide the bolt through the wall bra cket, and thread the toggle nut onto the bolt. 3. Press the ends of the toggle nut toget her, and insert the bolt/nut into the pilot hole until the nut clears inside wall surface. The toggle nut should spring open [...]

12 - 9 3. Slide the washer onto the screw and tighten the nut to secure the assembly. 4. Remove the rubber feet on the bottom of the Net Base. 5. Slide the base onto the DIN Rail using the slot on the bottom of the base. W all Bracket, Qty . 1 DIN Rail, Qty . 1 W asher , Qty . 1 Nut, Qty . 1 Screw , Qty . 2 W asher , Qty . 1 Nut, Qty . 1 W all Brac[...]

12 - 10[...]

13 - 1 13 Customer Suppor t T echnical Assistance If you need assistance installing or trou b leshooting your de vice, please contact us b y using one of the methods below: Knowledge Base: www.hsmknowledgebase.com Our Knowledge Base pro v ides thousands of immediate solutions. If the Knowledge Ba se cannot help , our T echnical Suppor t P or tal (s[...]

13 - 2 FROM A CLAIM BASED ON CONTRACT, WARRANTY, TORT, OR OTHERWISE) EXCEED THE ACTUAL AMOUNT PAID TO HII FOR THE PRODUCT. THESE LIMITATIONS ON LIABILITY SHALL REMAIN IN FULL FORCE AND EFFECT EVEN WHEN HII MAY HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH INJURIES, LOSSES, OR DAMAGES. SOME STATES, PROVINCES, OR COUNTRIES DO NOT ALLOW THE EXCLUSION O[...]

[...]

™ Honeywell Scanning & Mobility 9680 Old Bailes Road Fort Mill, SC 29707 www.honeywellaidc.com 61-WEH-UG Rev C 4/12[...]