Honeywell 9900 manuale d’uso

Dolphin ® Power Tools With Windows Mobile ® 6 for the: Dolphin 7600 Mobile Computer Dolphin 9900 Mobile Computer User’s Guide[...]

Discl aimer Honeywell International Inc. (“Honeywell”) reserves t he right to make changes in specifications and other information contained in this document without prio r notice, and the reader should in all cases consult Honeywell to determine wh ether any such changes hav e been made. The information in this publication does not represent a[...]

Dolphin® Power To ols User’s Guide Rev A 8/6/08 iii Table of Contents Chapter 1 - Accessing and Upgrading Power Tools Dolphin Power Tools Overview ................................................... ................................... 1-1 Software Requirements ......................................... ............................................[...]

iv Rev A 8/6/08 Dolphin® Power Tool s User’s Guide Autorun ............. ..................................................... .......................................... ............ ... 4-1 Autorun.exm File................................... ........................................... ......................... 4-1 Start Options ................[...]

Dolphin® Power To ols User’s Guide Rev A 8/6/08 v Exporting Specific R egistry Settings ........................................... .................................... 8-5 Other Export Options ....................................................................... ......................... 8-5 Backing Up the Registry ...........................[...]

vi Rev A 8/6/08 Dolphin® Power Tool s User’s Guide[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 1 - 1 1 Accessing and Upgrading P o wer T ools Dolphin P ower T ools Over vie w Dolphin Power Tools are installed in every Dolphin te rminal. Different versions o f Power Tools apply to different Dolphin terminals depending on their model or op erating system. P ower T ool Windows Mobile 5/6 Window [...]

1 - 2 Rev A 8/6/08 Dolphin® Power Tools User’s Guide Software Requirements Dolphin Terminals Dolphin Power Tools are designe d to work with Windows Mobile ® 6 Desktop The Power Tools installer and the workstation version of EZCon fig Editor are designed to work with the following operatin g systems: •M i c r o s o f t ® Windows ® XP •M i [...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 1 - 3 Exiting the P ower T ools Main Window • Scroll down and tap the Exit icon . • Tap File > Exit (ESC) . • Press ESC on the keyboard. View Options The View menu changes the organization of the Power Tools main wind ow and is lo cate d at t he bottom of the screen. A checkmark appears n e[...]

1 - 4 Rev A 8/6/08 Dolphin® Power Tools User’s Guide •L i s t V i e w • Detail View (This view displays a descrip tion of the Power Tool in a column to the right of the na me.) Additional Dolphin P o wer T ools These Power Tools are in th e Dolphin terminal but do not appe ar on the Power Tools main window. Name Function Storage Location Acc[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 1 - 5 Upgrading P ower T o ols Dolphin Power Tools come loaded in eve ry Dolphin terminal and are included in system upgrades. Acquiring Upgrades Upgrades are available from Customer Support (see page 13-1) or www.honeywell.com/aidc . Installing an Upgrade to the W orkstation Power Tools upgrades co[...]

1 - 6 Rev A 8/6/08 Dolphin® Power Tools User’s Guide 4. Click Next. 5. Accept or change the in st allation location then click Next .[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 1 - 7 6. Click Install and t he programs begin installing. 7. The following screen appears when the progr ams have finished installing: 8. Click Finish .[...]

1 - 8 Rev A 8/6/08 Dolphin® Power Tools User’s Guide Folder on the W orkstation After installation on the workstation is complete, the upgrade files are stored on the workstat ion at C:Program FilesHoneywe llPower Tools and Demos for WM 6.0 . Note: If a Honeywell folder doe s no t already exist in the Progr am Files folder, the installa tion [...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 1 - 9 9. When all the files are pasted, cold boot th e terminal. 10. The Power Tools upgrade installs du ring startup.[...]

1 - 10 Rev A 8/6/08 Dolphin® Power Tools User’s Guide[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 2 - 1 2 EZConfig Overview EZConfig is a suite of products t hat configures Do l phin terminals quickly and efficiently. W ith the tools in the EZConfig suite, you can package d ata on the workstation, then deploy and u npackage that data on the Dolphin terminal. Components There are two main compone[...]

2 - 2 Rev A 8/6/08 Dolphin® Power Tools User’s Guide EZConfig Editor EZConfig Editor creates, edits, and manages EXM files fo r Dolphin terminals. There is an EZConfig Editor on the workstation and an EZConfig Editor on the terminal. In the workstation editor, EXM files are edited , saved, then transferred to the terminal. In the termin al edit [...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 2 - 3 Use these files as templates to create new EXM files. Opening EZConfig Editor on the W orkstation After you complete installation, EZConfig Edito r is available on the workstation from the Start menu. Click Start > Programs > Honeywell > EZConfig Editor > EZConfig Editor . Menu and[...]

2 - 4 Rev A 8/6/08 Dolphin® Power Tools User’s Guide Edit Menu For Section Edit menu options, see Working wit h Sections on page 2-7. For Key Edit menu options, see Working with Keys on page 2-12. View Men u Save Sav es the open file to the location you sele ct on the workstatio n. This option is disabled f or new and im por ted files; use Sa ve[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 2 - 5 To o l s M e n u Menu I tem Descripti on Simplify Document Note: You cannot undo this action! Simplifies the EXM file, which mak es it sm aller . Simplifying per manently remo ves • D isabled sections and keys • Descriptions • Bar code s ettings When y ou create a bar code , you can simp[...]

2 - 6 Rev A 8/6/08 Dolphin® Power Tools User’s Guide Opening EXM Files EZConfig Editor opens EXM files stored on the workst ation or the terminal (if an ActiveSync connect ion is established). Opening EXM Files on the W or kstation Click File > Open or the Open toolbar button and select the EXM file. When you select a known MNU or INI file, E[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 2 - 7 W orking with Open EXM Files Whether you open an EXM or INI f ile, EZConfig Editor displays the content in four different sections of the window. Status Bar The Status Bar appears at the bottom of the wind ow and displays information about selected sections and keys. Selected Section See Secti[...]

2 - 8 Rev A 8/6/08 Dolphin® Power Tools User’s Guide Edit Menu Options Select a sectio n click Edit to see the available options. Menu Item Description Rename Activ a tes the sectio n name so that y ou can rename the section. Note: You cannot modify the name if the section is locked; see Section Locks (page 2-10 ). Cut Cuts a selected section. C[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 2 - 9 Modifying Section Names To change a section name, double-click on the folder and type in the new name or select Rename on the Edit menu. Type in the new name and press ENTER. Note: You cannot modify the na me if the section is locked or disabl ed; see Section Locks (page 2-10 ). Modifying Sect[...]

2 - 10 Rev A 8/6/08 Dolphin® Power Tools User’s Guide Section Locks There are different types of locks on sections. The stat us bar indicates what type of lock is applied to a selected section . Note: All locks are applied to each individual sect ion an d are not recursive. Only text t hat appears in blue can be modified. Section-Le v el Merge M[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 2 - 11 To change section-level merge modes, select a section and right click. The folder colors change immediately after selectio n.[...]

2 - 12 Rev A 8/6/08 Dolphin® Power Tools User’s Guide W orking with K eys Keys have a Name, a Description, and a Value and reside inside sections. For spec ific key values, consult the chapters of this user’s gu ide that describe the EXM file you’re attempting to edit. Edit Menu Options Select a key and right-click or click Edit to see the a[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 2 - 13 Modifying K ey Names To modify key names, do uble-click on the key name or select Rename on the Edit menu. Type in the new name and press ENTER or TAB. Note: You cannot modi fy the de scri ption if the key is locked ; se e Key Types (page 2- 14 ). Only text tha t appea rs in blue can be modif[...]

2 - 14 Rev A 8/6/08 Dolphin® Power Tools User’s Guide K ey T ypes When a key is selected, its prope rties display in the Status bar. Note: Locked and Read Only proper ties are not recursive. Pro perties are applied to each individual key. Only text that appear s in blue can be modifie d. Saving to the De vice You can save EXM files directly to t[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 2 - 15 Creating New Configuration Documents To create new EXM files that are configuration doc uments, you can open an existing EXM file and save it with a new name or create an EXM file from scrat ch. 1. Click File > New > Configuration Document . The root node is created and appears as the t[...]

2 - 16 Rev A 8/6/08 Dolphin® Power Tools User’s Guide Associating Applications The Properties function associates an EXM file with an a pplication on the terminal. The associated application launches after EZConfig Client de codes the bar code containing the EXM file. For more information, see Creating Bar Codes on page 2-21. While the EXM file [...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 2 - 17 Registry Documents EZConfig Editor creates registry documents in the EXM file format and also opens existing REG files and converts them to the EXM file format. EZConfig Edit or can not save registry documents in the REG file forma t. Updating the Registry on the T erminal To update the termi[...]

2 - 18 Rev A 8/6/08 Dolphin® Power Tools User’s Guide Creating Registry Documents 1. In EZConfig Editor, click File > New > Registry Document . The ne w document con tains the three top-le vel sections in a registry . These sections are loc k ed and cannot be changed. Y ou ca n add subsections to each section a nd then add k eys to those s[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 2 - 19 Adding Registry Ke ys To add a key, select a section, and righ t-click in the key area of the EZConfig Editor window. When you click OK to save the key, the da ta appears in columns in the key area of the EZConfig Editor window. Pr ocessing Registry Documents on the T erminal After EZConfig C[...]

2 - 20 Rev A 8/6/08 Dolphin® Power Tools User’s Guide If you do not want to store t he registry EXM file on the terminal aft er updating the registry, select the Temporar y (page 2-25) option on the Bar Codes Tab (page 2-22). P ersistent Registr y Documents If you want to update the registry during every co ld boot, create a registry document in[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 2 - 21 Creating Bar Codes EZConfig Editor embeds EXM files in bar codes. T he EZConfig Client on t he terminal decodes the bar code and deploys the data. Using bar codes quickly and easily configures Dolphin terminals without an IrDA, ActiveSync, or network connection to a workstation. Document T yp[...]

2 - 22 Rev A 8/6/08 Dolphin® Power Tools User’s Guide Bar Code Sheet EZConfig Editor produces a bar code sheet that contai ns the generated bar code s. Bar code sheets can be printed from a laser printe r, copied to the clipboard, and saved as an HTML file; see Printing and Saving Options on page 2-2 6. In addition, individual b ar codes c an be[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 2 - 23 Remote P ath T ype in the locat ion and filename where the EXM file should be dep loy ed on the terminal. F or instance, ipsmdeviceconfig.exm T ap th e br owse b utton to navigat e t o the location on the terminal. Y our Activ eSync connection must be act iv e . Full Contents Includes the f[...]

2 - 24 Rev A 8/6/08 Dolphin® Power Tools User’s Guide Adv a nced T ab The Options tab contains set tings that tell EZConfig Client how to process the EXM file on the termin al. Field Des cription Bar Code Options –This section determines some of th e basic bar code parameters. Max Bar code Size Set the maximum amount of data (in b ytes) one ba[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 2 - 25 Merge each section… (Default selection) Deplo y s inf or mation according t o th e se ction-le vel merge mode settings; see Section- Level Merge Modes on page 2-10. If already e xists, deplo y: • Always –Select to always use the section-level mer ge mode settings. • Only if newe r –[...]

2 - 26 Rev A 8/6/08 Dolphin® Power Tools User’s Guide Inf ormation at the Bottom of T ab Windows Printing and Sa ving Options On the Bar Codes tab, when you click Print , a bar code printing window o pens offering you a numb er of printing options. Field Des cription Pa c ka g e S i z e Displays the total size of the bar code package. This numbe[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 2 - 27 Save Sa v es the bar code shee t as an HTML file. Previe w Click to see a print pre view . Clic k Print on this window to pr int y our bar codes. Field/Op tion Descript ion[...]

2 - 28 Rev A 8/6/08 Dolphin® Power Tools User’s Guide Con ver ting Known INI and MNU Files EZConfig Editor contains a batch conversion too l that converts known INI files on the terminal to the new EXM file format. EZConfig Editor pulls INI files from the IPSM folder of a remote device, converts them to the EXM file format, and saves bo th orig[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 2 - 29 C:Program FilesHoneywe llPower Tools and Demos for WM 6.0De vice ImageConverted FilesUpgrade X . The X increases b y one each time y ou run a batch con v ersion. 4. When you click OK , the conversion runs. 5. EZConfig Editor creates two folders inside the Upgrade X fold er: Converted EX[...]

2 - 30 Rev A 8/6/08 Dolphin® Power Tools User’s Guide EZConfig Editor on the T erminal EZConfig Editor on the terminal edits and creates EXM file s in the terminal and contains th e same basic functionality as the editor on the workstation. Accessing EZConfig Editor Tap Start > Power Tools > EZCon fig Utilities . The EZConfig Utilities win[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 2 - 31 A vaila ble M enus The menus in the Command b ar contain the same items as the menus in the EZConfig Editor on the workstation. File Menu F or details, see File Menu on page 2-3. Note: The one difference in the file menus is that you cannot generate bar cod es from EXM files on the terminal. [...]

2 - 32 Rev A 8/6/08 Dolphin® Power Tools User’s Guide 4. Tap OK to save changes. (You can a lso press the ENTER key.) Tap Cancel to close the window witho ut changes. Moving Sections You cannot drag and drop to move sections in the tree. Use the Cut , Copy , Paste , and Paste as Child items on the Edit menu to move sections. Note: The Paste func[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 2 - 33 Launching Associated Applications The Tools menu contains an item n amed Launch Associated App . Launch Associated App is enabled only when there is an app lication associated with the EXM file. Selecting this item automatically saves th e open EX M file and launches the associated applicatio[...]

2 - 34 Rev A 8/6/08 Dolphin® Power Tools User’s Guide EZConfig Client EZConfig Client decodes bar cod es created in EZConfig Editor and deploys the data in the te rminal. In addition, if the EXM file in the bar code is associat ed with an application, EZConfig Client launches that application, which then processes the decoded dat a. EZConfig Cli[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 2 - 35 If there is only one bar code in the pac kage, EZ Config Client deplo ys the package . If there is more than one bar code in the pac kage, EZConfig Client decodes the bar code , records that one bar code has been rea d, and waits f or the ne xt scan. 5. Scan all the bar codes in the package .[...]

2 - 36 Rev A 8/6/08 Dolphin® Power Tools User’s Guide Note: DeviceConfig.exm must be associated with DeviceConfig.exe to be processed on the terminal appropriately. After decoding the bar code, EZ Config Client depl oys the data to DeviceConfig.exe, whic h applies the set tin gs to the terminal. Registry Documents Registry documents are always a[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 2 - 37 Launching EZConfig Client with a HotK ey Pressing ALT + SCAN launches EZConfig Client fr om any application window after you activate the HotKeys Powe r Tool; see HotKeys on page 6-5. ScanW edge Bar code decoding in EZConfig Client is compatib le with ScanWedge. You can set Sca nWedge t o pas[...]

2 - 38 Rev A 8/6/08 Dolphin® Power Tools User’s Guide[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 3 - 1 3 DeviceConfig Overview DeviceConfig consists of the DeviceConfig.exe and the DeviceConfig.e xm file located in the IPSM folder. DeviceConfig.exe looks for and app lies the settings in the De viceConfig.exm file. DeviceConfig.e xm File The DeviceConfig.exm file contains terminal configur atio[...]

3 - 2 Rev A 8/6/08 Dolphin® Power Tools User’s Guide DeviceConfig.e xm Sections and K e ys The sections and keys in the DeviceConfig.exm file are locked, which means that you can change values but not names or descriptions. Connections Section The Connections section contains child sections that set communication parameters on the termina l. Bea[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 3 - 3 DriverName Specifies the name of the radio dr iver . This string must match th e nam e of the driver for the current device. N/A X=A value in th e drop-down list; radio driver names are terminal- specific. Diff erent Dolphins ha ve diff erent radio drivers. TCPIP Section The keys in the TCPIP [...]

3 - 4 Rev A 8/6/08 Dolphin® Power Tools User’s Guide Security Section The Security section has no keys and one child se ction named “Supplicant,” which contains several profile subsections. Supplicant Section The Supplicant sectio n consists of a number of child sections. T he defaul t child section is named Profile1 and contains all the key[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 3 - 5 EAP Method A vailab l e EAP methods f or IEEE 802.1X and WP A(2)-Enterprise (EAP) association modes. N/A • LEAP • PEAPv0-MSCHAPV2 • PEAPv1-MSCHAPV2 • PEAPv1-GTC • PEAPv1-TLS • FAST-MSCHAPV2 • FAST-GTC • FAST-TLS •T L S • TTLS-MD5 • TTLS-MSCHAPV2 • TTLS-GTC PSK Enter the[...]

3 - 6 Rev A 8/6/08 Dolphin® Power Tools User’s Guide Priv ate Ke y Private k eys ar e used with cer tain types of EAP authentication. N/A Enter the a ddress on the Dolphin terminal of the private key . The pr ivate ke y mus t be located on the Dolphin terminal! Priv K ey Pa ss wo rd Private k e ys can be lock ed by pass words. N/A Enter the pass[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 3 - 7 Bluetooth Section Bluetooth Def ault Printer V alues In general, to establish a p rinter as a Bluetooth Favorite Device, you must establish the printer as a Bluetooth Favorite on the terminal. The problem is t hat Bluetooth Favorite settings are stored in RAM memory and therefore erased during[...]

3 - 8 Rev A 8/6/08 Dolphin® Power Tools User’s Guide GSM Section If there is no GSM radio installed in the terminal, disable this section. Ke y Descri ption Default Va l u e A vailable V alue Enable Enab les and dis ab les the GSM radio. 0 0=Disable 1=Enable ; when enab led, the WLAN radio t urns off automatically . APN Enter the Access P oint N[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 3 - 9 System Section The System section contains child se ctions that conf igure various system sett ings. For specifics on each sections and their keys, refer to the Description sections in the DeviceConfig.exm file itself. About Section The About section sets a unique device name and description f[...]

3 - 10 Rev A 8/6/08 Dolphin® Power Tools User’s Guide Split Restrictions The percentage split you a re able to enter is specific to each termina l’s memory configuration. Min/max ranges can be retrieved from SysInfo or Se tRAM. •S e e RAM INFO on page 6-20. •S e e SetRAM Window on page 11-2. A utoInstall When the RAM section is enabled o n[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 3 - 11 MobiConr ol Section If the terminal includes the MobiControl Boo tstrap Agent (/IPSM/MCBootstrapAgent.exe), then DeviceConfig can be used to configure the terminal to connect to a MobiControl Server and download the appropriate agent to the device. This section is disabled by default an d sho[...]

3 - 12 Rev A 8/6/08 Dolphin® Power Tools User’s Guide Command Line Arguments /q Quits the progr am; this command line in the Arg s field of the Associated Applica tion window stops the confirmation message from appea ring after De viceConfig.e xe finishes processing . /boot Reboots DeviceConfig.e x e[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 3 - 13 Launching De viceConfig.e xe Manuall y DeviceConfig.exe does launch automatically after each cold boot. However, if you make chang es to the DeviceConfig.exm file that you want app lied in the terminal immediat ely, manually laun ch DeviceConfig.exe. 1. Tap Start > Power Tools > EZCon f[...]

3 - 14 Rev A 8/6/08 Dolphin® Power Tools User’s Guide[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 4 - 1 4 A utorun and A utoInstall Overview Startup is the launch sequence w hen a Dolphin terminal is booted. There are two startup Power Tools: 1. Autorun (see page 4-1) 2. AutoInstall (see page 4-8) Au t o r un Autorun specifies the software applicatio ns to launch after each hard reset. Autoru n [...]

4 - 2 Rev A 8/6/08 Dolphin® Power Tools User’s Guide When processing files, the termin al behaves as tho ugh disabled sections are not there and moves on to the next enabled section. Settings Section Ke ys Note: This section and most of its keys are locked, which means that you can change the va lue but not the name or description . Pr ograms’[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 4 - 3 K eys in Each Prog rams’ Subsection Each Programs’ subsection contains or can contain the following keys: Editing the A utorun.exm File Edit Autorun.exm in EZConfig Ed itor. For details, see Working with Op en EXM Files on page 2-7. Adding a Pr ogram Subsection To launch at startup, a new [...]

4 - 4 Rev A 8/6/08 Dolphin® Power Tools User’s Guide 6. Save the file and transport it to the terminal. Cop ying a File If you want to copy a file and move it to another location, use Auto Install and the /copy command lin e argument. For details, see Command Line Arguments on page 4-10. Sample A utorun Configuration File A sample Autorun.exm fi[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 4 - 5 RFON The RF radio is Ena b led. Radio GSMON The GSM radio is enab led. BT ON The Bluetooth radio is enab led. RFGSMBT OFF The RF , GSM, & Bluetooth radi os are disab l ed. 29KEY The terminal has a 29-ke y k eyboar d. Keyb oard 35KEY The terminal has a 35-ke y k eyboar d. 38KEY The terminal[...]

4 - 6 Rev A 8/6/08 Dolphin® Power Tools User’s Guide Multiple options can be specif ied for each categor y. For example, you c an specify both 35 KEY and 43KEY options to request that the program run in either a 35- or 43-key keyboard terminal. Seperate multiple options with commas. To ignore a category, don’t specify any of its options. 7300 [...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 4 - 7 Applying Star tup Options to t he A utorun Configuration File For each category, Au torun validates each startu p option specified in th e StartOption ke y. If no specified option is valid in a category, Autorun does not exec ute the program. If at least one of the spe cified options is valid [...]

4 - 8 Rev A 8/6/08 Dolphin® Power Tools User’s Guide A utoInstall AutoInstall consists of an AutoInstall.exe that, when launched, installs the cab f iles in the AutoInstall folder. The AutoInstall fo lder is where you store cab files for software applications if you wan t them to persist through hard resets. The AutoInstall program runs a ccordi[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 4 - 9 A utoInstall.exm The AutoInstall.exm file controls the beh avior and appearance of the Au toInstall window and install process. Ke y Function Default Va l u e A v ailable V alues Ve r s i o n This is the current v ersion of the A utoInstall.e xm file. Th is ke y is read-only and cannot be mod [...]

4 - 10 Rev A 8/6/08 Dolphin® Power Tools User’s Guide Note: Remember! It’s the Aut orun.exm file that dete rmines the programs and inst all sequence, not AutoInsta ll.exm. Command Line Arguments /copy Add /copy to the Autorun.exm file to autom atically mov e a file from one location to another . Usage: autoinstall / co p y <sou rcefilename&[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 5 - 1 5 ScanW edge Overview ScanWedge sends data from the decoder, serial p ort, or IrDA interface to the foreground application as keystrokes (as if the data were entered via the ke yboard). The foreground application is the op en software application whose window is curr ently active on the displa[...]

5 - 2 Rev A 8/6/08 Dolphin® Power Tools User’s Guide Disabling ScanW edge Navigate to the Power Tools Main Window (see page 1-2) and tap the ScanWedge icon ag ain. OR Select Exit on the Command Bar Menu (page 5-1). Modifying the ScanW edg e Configuration File When ScanWedge is installed, a ScanWedge.exm file is inserted in the IPSM fold er. Thi[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 5 - 3 Settings Section The Settings section determines h ow ScanWedge interpre ts data from the decoder, serial port, and IrDA interface. 0 = Disable 1 = Enable Settings Section Key Description Default Va l u e A vailable V alues Ve r s i o n This is the v ersion of ScanW edge 3 Y ou cannot modify t[...]

5 - 4 Rev A 8/6/08 Dolphin® Power Tools User’s Guide SuffixID Specifies the symbology identifier sent after the decode d/receiv ed data. 0 0= No symbology identif ier is sent. 1=The Code ID is sent. 2=The AIM I D is sent. 3=The SymModifier is sent . SoundConnect Enab les and disables • The sound that ScanWedge makes when starting up, shutting [...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 5 - 5 SendMode Specifies the met hod to use when sending the deco ded message to the f oreground application. Note: T his setting affects o nly the decoded message; t he prefix and suffix are always sent using the virtual key meth od to allow navigational functionality. 0 0=Vir tual key method: each[...]

5 - 6 Rev A 8/6/08 Dolphin® Power Tools User’s Guide Comm Section The serial port settings in the Comm section determin e the interaction between ScanWedge and the serial port. Comm Section Key Description Default Va l u e A vai lable V alues Enable Enables (or disables) ScanWedge to receive and inter pret data fr om the serial por t. 0 0=Disabl[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 5 - 7 P ower out Enables an d disables po wer out of the serial por t f or ScanW edge specifically . General po wer out settings are established in the registr y . The serial por t po wers out 5V at 500mA. 0 0=Disab led; do not pow er out when scanning with ScanW edge 1=Enabled ; pow er out when sca[...]

5 - 8 Rev A 8/6/08 Dolphin® Power Tools User’s Guide Decode Section The Decode section specifies decoder settings when using the decoder with Scan Wedge. ScanW edg e Entry Description Default Va l u e A vai lable V alues Enable Enab le s and di sab les the decoder f o r ScanWedge. 1 0=Disabled; decoder is not used. 1=Enabled ; decoder sends bar [...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 5 - 9 AimerDuration The number of milliseconds the scanner aimer is displa yed, after the trigger ke y has been pressed down, bef ore attem pting to deco de a barcode. 0 [Decode begins instantly . ] Enter times in 1/10 00th of a second. AimerDelay The amount of time bet ween scans bef ore the aimer [...]

5 - 10 Rev A 8/6/08 Dolphin® Power Tools User’s Guide GoodScanFreq Sound freque ncy used f or play a custom good scan beep . Note: The Window's "Good Decode" sound (if defined in the contr ol panel) takes p recedence over this option. 2749 V ariab le Use the up and do wn arro ws to change the n umber OR T ype in the cod e f o r th[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 5 - 11 Centering Section The Centering section determines the c entering window for ba r code scanning. ScanW edg e Entry Description Default Va l u e A vai lable V alues CenteringEnable= Enab le and disables the decode centering window for the de coder. 0 0=D isabled; centering is disabled f or Sca[...]

5 - 12 Rev A 8/6/08 Dolphin® Power Tools User’s Guide Formatting Section ScanWedge supports data formatting. The Formatting section contai n s subsections and each subs ection supports one data fo rmat. Formatting Subsections Subsection Key Description Default Va l u e Av ai lable V alues Format Specifies data f or matting par ameters Empty See [...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 5 - 13 A vailab le Data Formatting Commands These are the data format ting operations applied to the bar cod e data. The entire command string is entered into the Format key. Command Description Send Commands F1xx Send all char acters f ollow ed by “xx” k ey or function code , starting from curr[...]

5 - 14 Rev A 8/6/08 Dolphin® Power Tools User’s Guide Note: xx and ss stand for hex values of a character ( 00-FF), nn for a nu meric count (00-99) . ED Chec k to make sure t here is a non-numeric ASCII char acter at the current cursor position. If character is numeri c , format is ab or ted. FBnnxxyy…zz Suppress all occurrences of up to 15 di[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 5 - 15 Code 39 b (0x62) Code 49 l (0x6C Code 93 and 93i i (0x69) Coupon Code c (0x63) Data Matrix w (0x77) EAN·UCC Composite y (0x79) UCC / EAN-128 I (0x49) EAN-13 d (0x64) EAN-8 D (0x44) Interleaved 2 of 5 e (0x65) ISBT j (0x6A) Japanese P ost J (0x4A) KIX (Netherlan ds) P ost K (0x4B ) K orea Po [...]

5 - 16 Rev A 8/6/08 Dolphin® Power Tools User’s Guide P osiCode W (0x57) Po s t n e t P (0x50) QR Code s (0x73) Reduced Space Symbology (RSS-14,RSS Limited, RSS Expanded) y (0x79) Straight 2 of 5 IA T A (two-bar star t / stop) f (0x66) Straight 2 of 5 Industrial (three-ba r start/stop) f (0x66) TCIF Linked Code 39 (TLC39) T (0x54) Te l e p e n t[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 5 - 17 Symbologies Section The Symbologies section specifies the settin gs for each of the symbologies supported by the d ecoder. The settings are in the form: Symbology Name=Enable(1 or 0), Parm1, Parm2, Parm3, Parm4, Parm5, P arm6, Parm7, Parm8 Where • Enable specifies that the symbology is enab[...]

5 - 18 Rev A 8/6/08 Dolphin® Power Tools User’s Guide Coupon Code 0=Disa bled 0,0, 0,0,0,0,0 ,0,0 Data Matrix 0=Disabled 0,1,1500,0,0,0,0,0 ,0 Dutch P ost 0=Disable d 0,0,0,0,0 ,0,0,0,0 EAN-8 0=Disable d 0,1,0,0,0 ,1,0,0,0 EAN-13 1=Enable d 1,1,0,0,0 ,1,0,0,0 EAN.UCC Composites 0=Disab led 0,1,300,0,0, 0,0,0,0 Interleaved 2 of 5 1=Enable d 1,0,0[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 5 - 19 Straight 2 of 5 IA T A 0=Disable d 0,4,48,0,0,0,0, 0,0 Straight 2 of 5 Industrial 0=Disa bled 0,4,4 8,0,0,0,0,0,0 TCIF Linked Code 39 (TLC39) 0=Disab led 0,0,0 ,0,0,0,0,0 ,0 Te l e p e n 0=Disabled 0,1,60,0,0, 0,0,0,0 T rioptic Code 0=Disab led 0,0,0,0,0 ,0,0,0,0 UPC-A 1=Enable d 1,1,1,0,0 ,0[...]

5 - 20 Rev A 8/6/08 Dolphin® Power Tools User’s Guide VK (Virtual Key) Mapping Section The virtual key map settings are located in the VKM apping section in the ScanWedge configuration file. The virtual key map sett ings define the virtual key that will be sent to ScanWedge for any decoded ASCII character. The settings are in the form: ASCII Key[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 5 - 21 Vir tual K ey Codes T able The following table shows the symbolic constant names, hexadecimal values , and keyboard equivalents for the virtual-key codes used by Microsoft Win dows Mobile 6.0. The codes ar e listed in numeric order. Note: To use these co des in the VKMapping sectio n, the he [...]

5 - 22 Rev A 8/6/08 Dolphin® Power Tools User’s Guide VK_MENU 18 12 AL T ke y VK_CAPIT AL 20 14 CAPS LOCK ke y —— 21-25 15- 19 Reser ved f or Kanji systems —— 26 1A Undefined VK_ESCAPE 27 1B ESC key —— 28-31 1C-1F Reser v ed f or Kanji systems VK_SP A CE 32 20 SP A CEBAR ke y V K _ P R I O R 3 32 1P A G E U P k e y VK_NEXT 34 22 P A [...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 5 - 23 V K _ 3 5 13 33 k e y V K _ 4 5 23 44 k e y V K _ 5 5 33 55 k e y V K _ 6 5 43 66 k e y V K _ 7 5 53 77 k e y V K _ 8 5 63 88 k e y V K _ 9 5 73 99 k e y —— 58-64 3A-40 Undefined V K _ A 6 54 1A k e y V K _ B 6 64 2B k e y V K _ C 6 74 3C k e y V K _ D 6 84 4D k e y V K _ E 6 94 5E k e y [...]

5 - 24 Rev A 8/6/08 Dolphin® Power Tools User’s Guide V K _ Q 8 15 1Q k e y V K _ R 8 25 2R k e y V K _ S 8 35 3S k e y V K _ T 8 45 4T k e y V K _ U 8 55 5U k e y V K _ V 8 65 6V k e y V K _ W 8 75 7W k e y V K _ X 8 85 8X k e y V K _ Y 8 95 9Y k e y VK_Z 9 0 5A Z ke y —— 91-95 5B-5F Un defined VK_NUMP AD0 96 60 Numer ic k eypad 0 k e y VK_[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 5 - 25 VK_SUBTRACT 109 6D Min us sign (–) ke y VK_DECIMAL 110 6E P eriod (.) ke y VK_DIVIDE 111 6F Slash mark (/) ke y —— 88 88-8F Unassigned —— 146-185 92-B9 Unassigned —— 186-192 BA-C0 OEM-specific —— 193-218 C1-D A Unassigned —— 219-228 DB-E4 OEM-specific —— 229 E5 Unass[...]

5 - 26 Rev A 8/6/08 Dolphin® Power Tools User’s Guide Command Line Arguments /restart F orces ScanWedge t o process its configur ation file (Scanw edge. exm) again, which applies changes immediately . If the SoundCo nnect (see page 5- 4) is set to 1 (enab led), an ascending connect sou nd is pl a yed on r estar t. /quit Shuts do wn ScanW edge . [...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 6 - 1 6 Additional P o wer T ools Overview This chapter describes the following Power T ools: P ower T ool Icon See P age BattMon 6-2 InstallerCE No icon 6-4 Hotkeys 6-5 Ke yboar d Status 6-7 NoSIP 6-9 RASMan 6-10 Reboot 6-13 Suspend 6-14 SysInfo 6-15[...]

6 - 2 Rev A 8/6/08 Dolphin® Power Tools User’s Guide BattMon BattMon programs the terminal’s LEDs to monitor the charge status of the battery.The LEDs are located on the top, front panel of Dolphin terminals. T o Enabl e BattMon 1. Tap Start > Power Tools . The Power Tools Main Window (see page 1-2) ap pears. 2. Tap the BattMon icon once . [...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 6 - 3 Command Line Arguments /quit Shut down BattMon. /noicon Run BattMon with no icon. /nosplash Hide the BattMon spla sh screen. T o Chec k Battery P ower Manuall y You can, Tap the BattMon icon in the Command b ar on the Today screen. The Status (p age 6-2) menu item displays the charge percenta [...]

6 - 4 Rev A 8/6/08 Dolphin® Power Tools User’s Guide InstallerCE InstallerCE is a utility that saves CAB files after a manual install initiated by double-tapping on the CAB. Normally, when you install a program by double -tapping on its CAB, the CAB file is deleted after installation is comp lete. InstallerCE p reserves the original CAB file in [...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 6 - 5 HotKe ys The HotKeys Power Tool activates the hardware bu tton assignments in the Buttons setting. To start HotKeys automatically after each hard reset , enable the HotKeys Program section of th e Autorun.exm File (see page 4 -1). To E n a b l e H o t K e y s 1. Tap Start > Power Tools . Th[...]

6 - 6 Rev A 8/6/08 Dolphin® Power Tools User’s Guide Command Bar Menu When HotKeys is enabled, a small HotKeys icon ap pears in the Command bar at the bo ttom of the screen. Tap this icon to open the Command bar menu f or HotKeys: . Command Line Arguments /quit Shut do wn HotK e ys. /noicon Run HotK eys with no icon. /nosplash Hide the HotK eys [...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 6 - 7 Ke yboard Status Keyboard Status indicates whether the keyboard is in alpha, caps lock al pha, or numeric modes. Each Dolphin terminal series has keyb oards that switch between alpha and numeric modes, often by way of a keyboard combination. Keyboard Sta tus displa ys an alpha -numeric indicat[...]

6 - 8 Rev A 8/6/08 Dolphin® Power Tools User’s Guide Notification Men u When Keyboard Status is enabled, a Notificat ion menu appears in the command bar on the Today screen that displays the keyboard status when tapped. Note: You can also tap the icon in the Navigat ion bar to make this pop-up windo w appear. Tap Hide to remove the keyboard stat[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 6 - 9 NoSIP NoSIP toggles the Soft Inpu t Panel (SIP) between enabled and disabled. When disabled, the SIP does not pop up over application windows automatically. In addit ion, th e SI P icon does not appear in the Command bar on application windows. T o Enable NoSIP 1. Tap Start > Power Tools . [...]

6 - 10 Rev A 8/6/08 Dolphin® Power Tools User’s Guide RASMan RASMan establishes a PPP (Point-to-Point Protocol) connection with a RAS server. T o Enable RASMan 1. Tap Start > Power Tools . The Power Tools Main Window (see page 1-2) ap pears. 2. Click the RASMan icon once . The PPP connection is established according to the settings in the RAS[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 6 - 11 RASMan Configuration File RASMan application settings are stored in the Settings section of IPSMRASMan.ex m . Use EZConfig Editor (see page 2-2) to change the va lues in the RASMan.exm file. Ke y Description Default Va l u e Av aila ble V alues A udioNotification Enable and disab le audio n[...]

6 - 12 Rev A 8/6/08 Dolphin® Power Tools User’s Guide Retry Specifies the retry count. 10 RetryDela y Specifies the retr y dela y . 1000 E nter values in milliseconds . ShowErr or Enables and disables error messages on connecting . 1 0=Disable 1=Enable ShowStatus Enab les and dis ab les the appeara nce of status dialog bo x es. 1 0=Disab led; st[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 6 - 13 Reboot Reboot performs a warm or co ld b oot f rom t he to uch screen. All Dolphin term inals reboot with keyb oard commands; Reboot offers you the option of using the touch screen instead . W arm Boot A warm boot is a soft reset. A so ft reset re-boots the device withou t losing RAM data. Yo[...]

6 - 14 Rev A 8/6/08 Dolphin® Power Tools User’s Guide Suspend Suspend puts the terminal in Suspen d mode. All Dol phin terminals have keyboard command s that put the terminal in Suspend mode; Suspen d offers you the option of using the touch screen instead. T o Suspend the Dolphin T erminal 1. Tap Start > Power Tools . The Power Tools Main Wi[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 6 - 15 SysInfo SysInfo provides a read-out of im portant system information including firmware versions, DLL versions, system parameters, as well as network and radio information. T o See System Inf ormation 1. Tap Start > Power Tools . The Power Tools Main Window (see page 1-2) ap pears. 2. Tap [...]

6 - 16 Rev A 8/6/08 Dolphin® Power Tools User’s Guide Viewing Options If you tap on the SYSINFO.txt file in the My Device folder, the file opens in Pocket Word. You cannot change system information by editing the text! T o Upload SYSINFO .txt to a W orkstation You can upload the SYSINFO.txt file to a workstation via ActiveSync. 1. On the worksta[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 6 - 17 Sample SysInf o File Field Sampl e Dat a This en tr y specifies the … SYSTEM D A TE/TIME Date 1/14/2008 D ate. Time 10:38: 36 Time. SYSTEM INFO Sa mple Data This entry speci fies the … Hard ware Revision 0 Hardware revision. OS V ersion WM60 Operating Syst em version. Ker ne l 22.06 (Dec [...]

6 - 18 Rev A 8/6/08 Dolphin® Power Tools User’s Guide ImgApi.dll 1.16 Current ImgApi.dll api build re vision. SYSTEM P ARAMETERS Sample Data This entry speci fies the … BatteryIdleTimeout 0 ExternalIdleTimeout 0 OEMInfo Han d Held Products Name of the OEM. PlatformT ype P oc ket P C T ype of operating system. NETWORK INFO Sample Data This entr[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 6 - 19 File(XX)–F ile(XX): xDecoder .cab SDKR T_ar mv4i.cab Demos_armv4i.cab P owerTls_armv4i.cab Defa ultSetti ngs.reg These ar e the files in the IP SMA utoInstall folder . They persist through cold bo ot s an d inst all du r ing AutoInstall. PO WER ST A TUS Sample Data This entry spec ifies t[...]

6 - 20 Rev A 8/6/08 Dolphin® Power Tools User’s Guide RAM INFO Sample Da ta This entry specifies the … T o ta l Inst al le d RAM 128 MB A ctual size of installed RAM chip. T otal User RAM 128 MB T otal RAM a v ailab le f or file system and prog ram memory after kernel ov erhead. Min File Syst em Size 16 MB Minimum size d allo wed f or the file[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 7 - 1 7 Using the Battery Analyzer Overview The Battery Analyzer Power Tool helps you manage th e battery installed in the Dolphin 990 0 terminal. Note: The Battery Analyzer ca n be used only on the Dolphin 9900 term inal. Requirements For the Battery Analyzer to work, you must have the f ollowing i[...]

7 - 2 Rev A 8/6/08 Dolphin® Power Tools User’s Guide Analyzing a Battery During the analyze cycle, the installed battery charges to 100%, then drains it to 0%, then charge s it back up to 100%. When the operating tempe rature of the battery is between 0°C a nd 50°C and there is a constant AC supply to the terminal and batte ry, tap Start > [...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 7 - 3 Command Line Arguments The following command line argumen ts can be used in the CommandArgs key of the Battery Analyzer section of the PowerToolsMenu.exm file. /a Indicates “admin” and launches Ba tter y Analyzer in Advanced Mode (see page 7-3 ). /d Indicates “deb ug” and creates a log[...]

7 - 4 Rev A 8/6/08 Dolphin® Power Tools User’s Guide Log File The log file records data in the follo wing order: •D a t e •T i m e • Conditioning Flag • Battery Temperature • Battery Voltage • Capacity Percentage • Charge Percentage • Charge State • Charge Status • Analyzing Start Time • Elapsed Time • Estimated Completio[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 8 - 1 8 Registry P ower T ools Overview The registry is the configuration database in all 32-bit versions of Windows that contains settings for the hardware and software, consisting of the SYSTEM.DAT and USER.DAT files. Ma ny settings previously stored in the WIN.ini and SYSTEM.ini files in 16-bit W[...]

8 - 2 Rev A 8/6/08 Dolphin® Power Tools User’s Guide 5. Drill-down to the appropriate registry entry. When y ou click on registry entry in the top half of the screen, the data appears in the lo wer half of the screen. The two co lumns in the bottom half of the window sho w the V alue Name and the V alue Data of the selected entry . 6. Double -cl[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 8 - 3 Menus The menus on the Re gEdit window offer you many editing options. File Menu The File menu allows you to create registry entr ies as well as import and export registry setting s. Edit Menu The Edit menu helps you work with existing registry entries. Menu Item Description New Creates a ne w[...]

8 - 4 Rev A 8/6/08 Dolphin® Power Tools User’s Guide View Men u These menu items shift focus between the Ke ys Panel and the Values Panel . Rename Renames a registry entr y . Enter the new name and press the ENTER or OK key . Delete Deletes a se lected registr y entr y . Find Searches f o r registr y entries with in a selected sect ion. (Select [...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 8 - 5 Impor ting Registry Files The file must be loaded on the te rminal and have a REG extensio n. 1. Tap File > Import . By default, the import function searches for REG files and displays the search results in the lower half of the window. 2. Tap once on the REG file and it loads automatically[...]

8 - 6 Rev A 8/6/08 Dolphin® Power Tools User’s Guide Bac king Up the Registry You can export the current registry by tapping the RegBackup icon on the Power Tools Main Window (see page 1-2) . A _RegBackup.reg file co ntaining the entire registry is created and stored in the IPSMAutoInstall f older . Because this REG file is stored in the IPSM[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 8 - 7 RegBac kup.exm The RegBackup.exm file is located in the IPSM folder and determines the content of the _RegBacku p .reg file. The RegBackup.exm file does NOT contain registry settings! Only REG files contain registry settings. Sections _TEMPLA TE_ Section The _TEMPLA TE_ section is a template [...]

8 - 8 Rev A 8/6/08 Dolphin® Power Tools User’s Guide Mode and Kernel Chec k In each Subsection root in the tree, there shoul d be two key-value pairs: Mode and KernelCheck. If these keys are not present, the defaults will be applied: Mode= Exclude KernelCheck= Enabled Mode The Mode key specifies export behavio r of the values in the section. 1=I[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 8 - 9 Command Line Arguments Argument Desc ription /export <filename> Expor t registry to <filename>. The <filename> par t is optional. If no file name is entered, the file will def ault to IPSMA utoInstall_Reg Backup .reg. /import <file name> Impor t <filename> to r[...]

8 - 10 Rev A 8/6/08 Dolphin® Power Tools User’s Guide Registry Edit Options in EZConfig You can also use EZConfig Editor to cre ate registry documents on the wo rkstation, create a bar code, then use EZConfig Client to decode the b ar code and update the registry on the terminal. For more information, see • Registry Documents on page 2-17 • [...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 9 - 1 9 Netw ork Utilities Accessing Network Utilities Tap Start > Power Tools > Network Utilities . The Network Utilities window opens. Standard Network Utilities There are three Network Utilities that mirror DOS-prompt functions of your workstation: • IP Config (see page 9-2) • Ping (see[...]

9 - 2 Rev A 8/6/08 Dolphin® Power Tools User’s Guide IP Config IPConfig is a kernel utility that displays, releases, and renews IP parameters for on-board network adapters. On the Network Menu win dow, click the IPConfig icon . Th e IPConfig screen opens displaying the Input tab. Field Des cription Adapter This drop-dow n list contains the netwo[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 9 - 3 Displa ying the T erminal’ s IP Configuration On the Input tab, tap the Display full configuration button . The Dolphin terminal retrieves and displays the IP configuration for the entire terminal. About T ab The About tab displays information about th is Power Tool.[...]

9 - 4 Rev A 8/6/08 Dolphin® Power Tools User’s Guide Ping Ping provides a GUI-based version of the traditional command line ping ut ility. Pinging sends out an echo request to a specific computer on the network. Use Ping to verify communication li nks or that a specific IP address is working. Ping contains three tab windows: Input, Output, and A[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 9 - 5 Reading the Output T ab After you enter the IP information on the Input tab a nd click Execute , the Outp ut tab appears and begin s displaying the ping results. You can click the Stop button at any time to stop the ping. Any errors encountered display on the screen. When the Ping process is c[...]

9 - 6 Rev A 8/6/08 Dolphin® Power Tools User’s Guide Route Route is a kernel utility that allo ws the user to vie w and edit the rules that govern how packets de stined for various subnets are routed. These rules tell the device which g ateways on a given interf ace's subnet may be used to route packets to hosts on other subnets. Route cont[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 9 - 7 2. Click the Execute button. The Output tab appears disp laying the network routing ta ble. 3. This table displays Destination, Ne tmask, Gatewa y, Metric, and Interface columns. Scroll right to see all the columns. To A d d a R o u t e You can add a custom route wit h the Add command. 1. On t[...]

9 - 8 Rev A 8/6/08 Dolphin® Power Tools User’s Guide 6. Tap Execute . The system verifies yo ur results and the Out put tab lets yo u know if your entry was added successfully. To D e l e t e a R o u t e You can delete active routes. 1. On the Input tab, select DELETE from the Comma nd drop-down list. The Destination field appears. 2. Enter the [...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 9 - 9 1. On the Input tab, select CLEAR in the Command d rop-down list. 2. Click the Execute button. The system processes your request an d the number of entries deleted appears on the Output tab.[...]

9 - 10 Rev A 8/6/08 Dolphin® Power Tools User’s Guide WiFi Status The WiFi Status Power Tool displays information from the 802.11 adapter installed in the terminal and enables you to configure certain operating parameters. Tap Start > Power Tools > Network Utilities > WiFiStatus . Setup T ab The Setup tab enables you to chang e specific[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 9 - 11 Status T ab The Status tab displays statistics for the 802.11 ra dio. The Release IP and Re new IP button s enable you to release and ren ew the terminal’s IP address. BSSID T ab When accessed, the BSSID tab causes the rad io to scan for all APs in range and displays t he results. Apply T a[...]

9 - 12 Rev A 8/6/08 Dolphin® Power Tools User’s Guide Bac kup Radio Settings When the terminal’s radios are conf igured, entries are made in the re g istry that contain those settings. However, those entries are remo ved during the next cold boot. Ba ckup Radio Settings exports those radio settings into a RadioSettings.reg f ile and places it [...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 10 - 1 10 EZMenu Overview EZMenu formats application windows to display and launch software programs on the termin al. For example, the Power Tools Main W indow (see page 1-2) is managed by EZMenu. EZMenu consists of • Menu configuration file s (i.e., EXM files that end in “*Menu.exm”) in the [...]

10 - 2 Rev A 8/6/08 Dolphin® Power Tools User’s Guide Modifying Menu Configuration Files Menu configuration files can be modified in EZConfig Ed itor on the workstation or the t erminal, If modified on the workstation, the *Menu.exm file must be deployed to the terminal. For details about mod ifying EXM files in EZConfig Editor: •S e e EZConfi[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 10 - 3 Menu Configuration File Sections Menu configuration files contain of two basic sections: Settings and MenuEntri es . Both sections are locked, which means only their Values can be ch anged, not their section names. Settings Section The Settings section defines g eneral EZMenu settings. The ke[...]

10 - 4 Rev A 8/6/08 Dolphin® Power Tools User’s Guide MenuEntries Subsections The MenuEntries section determines wh ich programs appear on the application window. The MenuEntries section is locked, which means that you cannot ch ange its Name or Description; however, its child sections are not locked and can ha ve any name and description. Each [...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 10 - 5 Exit Icon Default EZMenu Configuration Files (see page 10-1) con tain a section named Exit as a child section of the MenuEntries section. Enabling the Exit section places this icon on the application window, which allo ws users to exit. If you want users to be able to e xit the application wi[...]

10 - 6 Rev A 8/6/08 Dolphin® Power Tools User’s Guide Start Options Start Options define the required system p arameters for a software application to launch. The following values can be entered for the StartOption key, wherever it appears: Option Name The pro gram launches if … Category DISABLED Nev er , regardless of other star tup opt i ons[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 10 - 7 29KEY The terminal has a 29-ke y k eyboar d. Keyb oard 35KEY The terminal has a 35-ke y k eyboar d. 38KEY The terminal has a 38-ke y k eyboar d. 43KEY The terminal has a 43-ke y k eyboar d. 56KEY The terminal has a 56-ke y k eyboar d. NO_KEY The terminal has a 56-ke y keyboar d. 7300 It’ s [...]

10 - 8 Rev A 8/6/08 Dolphin® Power Tools User’s Guide Multiple options can be specif ied for each categor y. For example, you c an specify both 35 KEY and 43KEY options to request that the program run in either a 35- or 43-key keyboard terminal. Seperate multiple options with commas. To ignore a category, don’t specify any of its options. PNPI[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 10 - 9 Locking Do wn the Application Window You can program a me nu configuration file to block access to the Start menu, OK button , and Command bar menus on the applicat ion window. When all of these items are blocked , the user must navigate the terminal from the application window. EZMenu carrie[...]

10 - 10 Rev A 8/6/08 Dolphin® Power Tools User’s Guide[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 11 - 1 11 SetRAM Overview The SetRAM Power Tool adjusts t he division of program memory vs. file system memory on Dolphin terminals running Windows Mobile 6.0. Windows Mobile 6.0 Memory Windows Mobile 6.0 is designed to use a persistent file store rather than a RAM object store. The allocation of fi[...]

11 - 2 Rev A 8/6/08 Dolphin® Power Tools User’s Guide Accessing SetRAM 1. On the Power Tools Main Window (see page 1-2), tap the SetRAM icon . The SetRAM window displays the current me mory distribution. 2. To change the memory allocat ion, use the slider to adjust the memory alloca tion: File MB =File Storage Memory Prog MB =Program Memory 3. T[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 11 - 3 RAM Memory Restrictions RAM memory allocation restrictions are built into SetRAM; the slider will not allo w you reset the memory beyond the terminal’s capabilities. T otal User RAM 121 MB T otal RAM av ailable f or file system and progr am memor y min us kernel ov erhead. Min Pr ogram RAM [...]

11 - 4 Rev A 8/6/08 Dolphin® Power Tools User’s Guide[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 12 - 1 12 Print P o wer T ools Overview Dolphin terminals contain two print u tilities: BTPrint.ex e BTPrin t pr ints to a Bluetooth device via the Bluetooth wireless radio; see pa g e 12-2 . IrD APrintCE.exe IrD APrint pr ints to an IrD A device via the IrD A por t; see page 12-2 . Both .exes are l[...]

12 - 2 Rev A 8/6/08 Dolphin® Power Tools User’s Guide BTPrint BTPrint allows you to print to a Bluetooth printer via the command line, provided tha t the Bluetooth printer is set up as a Bluetooth Favorite on th e Dolphin terminal. For more information about setting up Bluetooth Favorite devices, please see the Bluetooth se ction of the Print De[...]

Dolphin® Power Tools User’s Guide Rev A 8/6/08 13 - 1 13 Customer Suppor t T echnical Assistance If you need assistance installing or troubleshooting y our de vice, please call y our distributor or the nearest technical suppor t office: North America/Canada Telephone: (800) 782-4263 (8 a.m. to 6 p .m. EST) Fax number: (315) 554-6705 E-mail: nate[...]

13 - 2 Rev A 8/6/08 Dolphin® Power Tools User’s Guide[...]

[...]

™ Honeywell 700 Visions Drive P.O. Box 208 Skaneateles Falls, NY 13153-0208 PWRTLS-WM6-UG Rev A 8/6/08[...]