Hoover Limited manuale d’uso

V acuum Cleaner ® Read this manual before operating cleaner (Including Limited & Supreme models) ® Dimension  Owner’ s Manual[...]

1 It is suggested that you attach your sales receipt to this owner’s manual. Verification of date of purchase may be required for warranty service of your HOOVER product. and has serial number_________________________________________ Your cleaner is model_________________________________________ For your personal records, please enter the COMPLET[...]

4 STEP 2: Assemble handle 3 Assembling cleaner It is extre mely impor tant to read and follow all the i n struction steps in orde r . STEP 1 : Unpack ca rton Remove all parts from carton and identify each item shown. Make sure all parts, especially small items such as D, G, and K, are located before dispos- ing of cardboard packing. A.Upper handle [...]

Rotate c ord p rotector on cord until you see its arrow. (Fig. 4) 5 4 Do not plug cleaner in until assembly is totally complete. 8 9 RAILS RAILS 6 STEP 4: Att a ch handle Note location o f t apered rails on bra c ke t and on lower handle. (Fig. 8) With printed sid e of brac ke t facing up, slide r ai ls o n bracket onto rails on lo we r handle unti[...]

8 TABS 18 To replace bag door, in se rt the 2 tabs on botto m of bag door into the 2 slots on b ag compart- ment. (Fig . 1 8) 15 HOOKS DIRT TUBE SLOTS BAG COMPART- MENT Push paper bag collar f irm ly onto tube. (Fig. 17) 17 16 BAG COLLAR DIRT TUBE Tuck top and bottom of paper bag into bag compartment. Align opening in pa per b ag with dirt t u b e [...]

9 Pull switch lo c k above ON/OFF switch straight out. (Fig. 19) Dispose of switch lock. Note: If switch lock has come off during assembly make sure switch is in the OFF position (down) before plug- ging cord into electrical outlet. 19 SWITCH LOCK ON/OFF SWITCH 21 Note: Hose e nds must be firmly connected to cleaner ba se and tool rack when cleanin[...]

12 How to use The cleaner can also be moved by lifting it as shown. under low furniture. Step on handle release lever to lower handle. T ransporting cleaner To move your cleaner from room to room, put handle in upright position, tilt cleaner back on rear wheels, and push forward. Handle positions The handle of your cleaner has three positions; upri[...]

The cleaning of carpet and rugs Carpet height adjustment The nozzle will not move into the adjusted position until the cleaner handle is lowered to the operating position. When using hose and tools, slide knob to the Cleaning Tools setting. Return knob to the correct setting when cleaning floors. Do not leave knob in Cleaning Tools takes place at t[...]

C. Att a ch wand and tools The tools are attached to the hose or the wand in the same manner. Push tool firmly onto hose; twist tool slightly to tighten or loosen connec- tion. Use tools with cleaner handle in upright position. How to attach tool cover The tool cover is designed with a “break-away” feature which allows it to snap off if it is p[...]

17 Maintenance The following sections are concerned with proper maintenance of the cleaner. Familiarize yourself with these home maintenance tasks and keep this owner’s manual in a convenient place where you can refer to it when needed. Proper use and care of your cleaner will ensure continued cleaning effectiveness. When to replace Check bag fro[...]

20 5. Remove bulb by pulling straight out of socket; push new bulb into socket until it locks in place. 6. Place hood on cleaner body and press firmly to snap all four latches. Pull up on hood slightly to make sure all four latches are secured. Push nozzle control knob back onto front of cleaner. ➘ To check belt, remove bottom plate as shown on t[...]

21 How to replace Disconnect cleaner from electri- cal outlet and detach hose from cleaner. 1. Place handle in operating position and turn cleaner over. To remove bottom plate, insert end of flat screwdriver into wide area of right-hand slot and push handle of screwdriver to the rear. Repeat in left-hand slot. 2. Rotate plate and remove from cleane[...]

If an obstruction occurs during tool use, turn cleaner off and disconnect from electrical outlet and disconnect hose from cleaner. Open hose door and carefully remove any visible obstruction. If no obstruction is found, check hose and tools. Remove obstruction. To continue using tools, reattach hose to cleaner. If an obstruction occurs during floor[...]

25 Problem Possible cause Possible solution Cleaner l. Not firmly plugged in. l.Plug unit in firmly. won’t 2. No voltage in wall plug. 2.Check fuse or breaker. run 3. Blown fuse/tripped 3.Replace fuse/reset breaker. breaker. Cleaner l. Broken or worn belt. l. Replace belt. won’t 2. Agitator brushes 2.Replace agitator. pick up worn. 3. Bag full.[...]

Full One Y ear W arranty (Domestic Use) Your HOOVER ® appliance is warranted in normal household use, in accordance with the Owner’s Manual against original defects in material and workmanship for a period of one full year from date of purchase. This warranty provides, at no cost to you, all labor and parts to place this appliance in correct ope[...]