HP (Hewlett-Packard) 405501-001 manuale d’uso

Main tenan ce and Ser vice Gui de HP P a v ilion d v5 000 Notebook P C Doc ument P art Number : 40 5 5 01-001 January 2006 This guide is a troubleshooting reference used for maintaining and servicing the computer . It pro vides comprehensiv e information on identifying computer features, components, and spare parts; troubleshooting computer problem[...]

© Copyright 2006 He wlett-Packard De velopment Company , L.P . Microsoft and W indows are U.S. re gistered trademarks of Microsoft Corporation. AMD, Sempron, T urion, and combinations thereof, are trademarks of Advanced Micro De vices, Inc. Bluetooth is a trademark owned b y its proprietor and used by He wlett-Packard Company under license. SD Log[...]

Maintenance and Serv ice Guide iii Cont ent s 1 Product Description 1.1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2 1.2 Resetting the Computer . . . . . . . . . . . . . . . . . . . . . . . 1–4 1.3 Power Management . . . . . . . . . . . . . . . . . . . . . . . . . . 1–5 1.4 External Components . . . . . .[...]

iv Maintenance and Servi ce Guide Cont en ts 3 Illustrated Parts Catalog 3.1 Serial Number Location . . . . . . . . . . . . . . . . . . . . . . 3–1 3.2 Computer Major Components . . . . . . . . . . . . . . . . . . 3–2 3.3 Display Assembly Subcomponent s . . . . . . . . . . . . . 3–10 3.4 Plastics Kit . . . . . . . . . . . . . . . . . . . . . [...]

Conte nts Maintenance and Servi ce Guide v 5 Removal and Replacement Procedures 5.1 Serial Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–1 5.2 Disassembly Sequence Chart . . . . . . . . . . . . . . . . . . 5–2 5.3 Preparing the Computer for Disassembly . . . . . . . . . 5–4 5.4 Hard Drive . . . . . . . . . . . . . . . .[...]

vi Maintenance and Servi ce Guide Cont en ts 6 Specifications A Connector Pin Assignments B Power Cord Set Requirements C Screw Listing D Display Component Recycling Index[...]

Maintenance and Serv ice Guide 1–1 1 Product Des c ription The HP Pa vilion dv5000 Notebook PC offers adv anced modularity , Mobile AMD Semp ron™ and AMD T urion™ 64 Mobile T echnology processors , and extensi ve multimedia support. HP P av ilion dv5 000 Notebook PC[...]

1–2 Maintenance and Servi ce Guide Produc t Descr iption 1.1 F e a t u r e s ✎ Numerous references are made throughout this Maintenance and Service Guide to “full-featured” and “defeatured” computer models. A model is considered to be full-featured if it has 3 Uni versal Serial Bus ports and the follo wing components: ■ PC Card slot ?[...]

Pr oduct Desc ripti on Maintenance and Serv ice Guide 1–3 ■ Support for one T ype I or T ype II PC Card slot, with support for both 32-bit (CardBus) and 16-bit PC Cards ■ Support for ExpressCard slot ■ External 65-watt A C adapter with 3-wire power cord ■ 12- or 6-cell Li-Ion battery pack ■ Stereo speakers ■ V olume up, vo lume mute, [...]

1–4 Maintenance and Servi ce Guide Produc t Descr iption 1 .2 Reset tin g t he C omp uter If the computer you are servicing has an unkno wn password, follo w these steps to clear the password. These steps also clear CMOS: 1. Prepare the computer for disassembly (refer to Section 5.3, “Preparing the Computer for Disassembly , ” for more inform[...]

Pr oduct Desc ripti on Maintenance and Serv ice Guide 1–5 1. 3 P o w e r M a n a g e m e n t The computer comes with po wer management features that extend battery operating time and conserv e power . The computer supports the follo wing power management features: ■ Standby ■ Hibernation ■ Setting customization by the user ■ Hotke ys for [...]

1–6 Maintenance and Servi ce Guide Produc t Descr iption 1 .4 External C ompon ents The external components on the front of the computer are sho wn belo w and described in T able 1-1. F ront C omponents[...]

Pr oduct Desc ripti on Maintenance and Serv ice Guide 1–7 Ta b l e 1 - 1 Front Components Item Component Function 1P o w e r l i g h t ■ On: Computer is turned on. ■ Off: Computer is off or in hibernation. ■ Blinking: Computer is in standby . 2B a t t e r y l i g h t ■ On: A battery pack is charging or is close to full charge capacity . ?[...]

1–8 Maintenance and Servi ce Guide Produc t Descr iption The external components on the right side of the computer are sho wn below and described in T able 1-2. R ight-Si de Compone nts Ta b l e 1 - 2 Right-Side Components Item Component Function 1A u d i o - o u t (headphone) jack Connects an optional headphone or powered stereo speak ers. Also [...]

Pr oduct Desc ripti on Maintenance and Serv ice Guide 1–9 The external components on the rear panel of the computer are sho wn below and described in T able 1-3. Rea r P a n e l C om p o n en t s Ta b l e 1 - 3 Rear P anel Components Item Component Function 1 Wireless light On: One or mo re internal wireless devices hav e been turned on. ✎ To e[...]

1–10 Maintenance and Servi ce Guide Produc t Descr iption The external components on the left side of the computer are sho wn below and described in T able 1-4. Lef t -Sid e Comp on en ts Ta b l e 1 - 4 Left-Side Components Item Component Function 1 Security cable slot Attaches an op tional security cable to the computer . ✎ The purpose of secu[...]

Pr oduct Desc ripti on Maintenance and Serv ice Guide 1–11 5 Expansion por t 2 Connects t he computer to an optional docking de vice. ✎ The computer has only one expansion port. The term expansion port 2 describes the type of expansion port. 6 USB por ts (2) Connect optional USB de vices. 7 1394 por t (4-pin, selected models only)) Connects an [...]

1–12 Maintenance and Servi ce Guide Produc t Descr iption The standard ke yboard components of the computer are shown belo w and described in T able 1-5. Standar d K eyboar d Components[...]

Pr oduct Desc ripti on Maintenance and Serv ice Guide 1–13 T able 1-5 Standard K eyboar d Components Item Component Function 1 f1 to f12 ke ys (12) P erform system and application tasks. When combined with fn , function ke ys perfo r m additional tasks as hotkeys . 2 caps lock ke y Enables caps loc k and tur ns on the caps lock light. 3 fn ke y C[...]

1–14 Maintenance and Servi ce Guide Produc t Descr iption The computer top components are sho wn below and described in T able 1-6. To p C o m p o n e n t s T able 1-6 T op Components Item Component Function 1 Caps lock light On: Caps lock is enab led. 2P o w e r l i g h t ■ On: The computer is on. ■ Blinking: The computer is in standby . ■[...]

Pr oduct Desc ripti on Maintenance and Serv ice Guide 1–15 2 P ow er button When the computer is ■ Off , press to tur n on the computer . ■ On, press to enter hibernation. ■ In standby , briefly press to exit standb y . ■ In hibernation, br iefly press to exit hibernation. If the computer ha s stopped responding and Microsoft® Windows® [...]

1–16 Maintenance and Servi ce Guide Produc t Descr iption The computer T ouchPad components are sho wn below and described in T able 1-7. T ouchP ad Components[...]

Pr oduct Desc ripti on Maintenance and Serv ice Guide 1–17 T able 1-7 T ouchP ad Components Item Component Function 1 T ouchP ad Mov es the pointer and selects or activates items on the screen. Can be set to perf or m other mouse functions, such as scrolling, selecting, and double-clic king. 2 Left and right T ouchP ad buttons Function like the l[...]

1–18 Maintenance and Servi ce Guide Produc t Descr iption The external components on the bottom of the computer are sho wn below and described in T able 1-8. Bottom Components Ta b l e 1 - 8 Bottom Components Item Component Function 1 Optical drive Supports an optical disc, such as a C D o r DV D. 2 Labels area Contains the serial number and othe[...]

Pr oduct Desc ripti on Maintenance and Serv ice Guide 1–19 5 V ents (2) Provide airflow to cool internal components. Ä T o pre vent o verheating, do not obstruct vents. Do not allow a hard surf ace, such as a printer , or a soft surf ace, such as pillows or thick rugs or clothing, to bloc k airflow . 6 Memory/Mini PCI module compar tment cov er [...]

1–20 Maintenance and Servi ce Guide Produc t Descr iption 1. 5 D e s i g n O v e r v i e w This section presents a design ov erview of k ey parts and features of the computer . Refer to Chapter 3, “Illustrated Parts Catalog, ” to identify replacement parts, and Chapter 5, “Remov al and Replacement Procedures, ” for disassembly steps. The [...]

Maintenance and Serv ice Guide 2–1 2 T roubl eshooting Å W ARNIN G: Only au thori z ed techni ci ans trained b y HP should r epair this equipment . All tr oubleshooting and r e pair pr ocedures ar e detailed to allo w only subas sembly-/module-level r epair . Because of the comple xity of the indi vi dual boards and suba ssemblies , do not attem[...]

2–2 Maintenance and Servi ce Guide T r oubleshooting Acce ssing Compute r Setup The information and settings in Computer Setup are accessed from the File, Security , T ools, and Advanced menus. 1. Open Computer Setup by turning on or restarting the computer . Press f10 while the F10 = Based Setup message is displayed in the lo wer-left corner of [...]

T r oubleshooting Maintenance and Serv ice Guide 2–3 4. T o confirm the restoration, press f10 . 5. Select File > Sa ve changes and exit , and then follo w the instructions on the screen. When the computer restarts, the factory settings are restored, and any identif ication information you hav e entered is sav ed. Selecting fro m the Fi le Men[...]

2–4 Maintenance and Servi ce Guide T r oubleshooting Selectin g from the Securit y Menu Ta b l e 2 - 2 Security Menu Select T o Do This Administrator pass word Enter , change , or delete an HP Administrator pass word. P ow er-on password Enter , change, or delete a po wer-on pass word. P assw ord options ■ Enab le/Disable stringent security . ?[...]

T r oubleshooting Maintenance and Serv ice Guide 2–5 Selectin g from the T ools Menu Ta b l e 2 - 3 To o l s M e n u Select T o Do This HDD Self T est options Run a quic k or comprehensive self-test on an y hard drive in the system. Battery Inf or mation View inf ormatio n about any battery packs in the computer . Memor y Check ■ Run a self-tes[...]

2–6 Maintenance and Servi ce Guide T r oubleshooting Selec ting from the Adv anced Menu Ta b l e 2 - 4 Adv anced Menu Select T o Do This Language (or press f2 ) Change the Computer Setup language. Boot options ■ Enable/Disab le MultiBoot, which sets a star tup sequence that can include most bootable de vices and media in the system. ■ Set the[...]

T r oubleshooting Maintenance and Serv ice Guide 2–7 2.2 T roubleshootin g Flo wc h ar ts Ta b l e 2 - 5 T roubleshooting Flo wcharts Over view Flowchart Description 2.1 “Flowchart 2.1—Initial T roubleshooting” 2.2 “Flowchart 2.2—No Po wer , Part 1” 2.3 “Flowchart 2.3—No Po wer , Part 2” 2.4 “Flowchart 2.4—No Po wer , Part 3[...]

2–8 Maintenance and Servi ce Guide T r oubleshooting Flowchart Description 2.14 “Flowchart 2.14—No OS Loading, Optical Dr ive” 2.15 “Flowchart 2.15—No Audio , P ar t 1” 2.16 “Flowchart 2.16—No Audio , P ar t 2” 2.17 “Flowchart 2.17—Nonfunctioning Device” 2.18 “Flowchart 2.18—Nonfunctioning Ke yboard” 2.19 “Flowchar[...]

T r oubleshooting Maintenance and Serv ice Guide 2–9 Flo wch ar t 2. 1—Initi al T roubleshootin g Connecting to network or modem? Begin troubleshooting. Is there power? Is the OS loading? Is there video? (no boot) Is there sound? Beeps, LEDs, or error messages? Keyboard/ pointing device working? Go to “Flowchart 2.17—Nonfunc- tioning Device[...]

2–10 Maintenance and Servi ce Guide T r oubleshooting Flo wch ar t 2.2—No P o w er , P art 1 1. Reseat the power cables in the docking device and at the AC outlet. 2. Ensure the AC power source is active. 3. Ensure that the power strip is working. Done Remove from docking device (if applicable). Pow e r u p on batter y power? Po we r u p on AC [...]

T r oubleshooting Maintenance and Serv ice Guide 2–11 Flo wc har t 2.3—No P ow er , Part 2 Continued from “Flowchart 2.2—No P ower , Pa r t 1 . ” Visually check for debris in batter y socket and clean if necessary . Done N Y Po we r o n ? Check batter y by recharging it, moving it to another computer , or replacing it. Pow e r o n ? Done [...]

2–12 Maintenance and Servi ce Guide T r oubleshooting Flo wch ar t 2.4—No P o w er , P art 3 Continued from “Flowchart 2.3—No P ower , Pa r t 2 . ” Reseat AC adapter in computer and at pow er so urce . Internal or external AC adapter? Done Done Done Done Po we r o n ? Pow e r o n ? Po we r o n ? Plug directly into AC outlet. Po we r L E D[...]

T r oubleshooting Maintenance and Serv ice Guide 2–13 Flowc ha r t 2.5 —N o P o wer , P ar t 4 Y N Continued from “Flowchart 2.4—No P ower , Pa r t 3 . ” Reseat loose components and boards and replace damaged items. Open computer . Loose or damaged parts? Y Close computer and retest. Pow er on ? Done N Replace the following items (if appl[...]

2–14 Maintenance and Servi ce Guide T r oubleshooting Flo wch ar t 2.6—No Video, P ar t 1 A N Stand-alone or docking device? No video. Replace the following one at a time. T est after each replacement. 1. Cable between computer and computer display (if applicable) 2. Display 3. System board Internal or external display?* Adjust brightness. Vide[...]

T r oubleshooting Maintenance and Serv ice Guide 2–15 Flo wch ar t 2.7—No Video, P ar t 2 Y N Continued from “Flowchart 2.6—No Video , Pa r t 1 . ” Done Adjust external monitor display . Video OK? Adjust display brightness. Video OK? Video OK? Done Done Check that computer is properly seated in docking device, for bent pins on cable, and [...]

2–16 Maintenance and Servi ce Guide T r oubleshooting F lo wch ar t 2 . 8— No nf u nct io ni ng Do ck in g D e vi ce (if applicable ) Y N Reseat power cord in docking device and power outlet. N Check voltage setting on docking device. Reset monitor cable connector at docking device. Reinstall computer into docking device. Docking device operati[...]

T r oubleshooting Maintenance and Serv ice Guide 2–17 Flo wch ar t 2.9—No O peratin g S y s tem (OS) Loading No OS loading from hard drive, go to “Flowchart 2.10—No OS Loading, Hard Drive, P ar t 1. ” Reseat power cord in docking device and power outlet. No OS loading.* *NOTE: Before beginning troubleshooting, always check cable connectio[...]

2–18 Maintenance and Servi ce Guide T r oubleshooting Flo wc har t 2. 1 0—No OS Loa ding , H ard Driv e, Pa r t 1 Go to “Flowchart 2.17—Nonfunctioning Device . ” Y Done N OS not loading from hard drive. Nonsystem disk message? Go to “Flowchart 2.11—No OS Loading, Hard Drive, P a r t 2. ” Reseat external hard drive. OS loading? Done [...]

T r oubleshooting Maintenance and Serv ice Guide 2–19 Flowc h ar t 2. 1 1—N o O S L oa di ng , H ard D rive, Pa r t 2 Load OS using Operating System disc (if applicable). Continued from “Flowchart 2.10—No OS Loading, Hard Drive, P ar t 1. ” Reseat hard drive. Done Disc or diskette in drive? 1. Replace hard drive. 2. Replace system board. [...]

2–20 Maintenance and Servi ce Guide T r oubleshooting Flo wch ar t 2. 1 2—No OS Loa ding , H ard Driv e, Pa r t 3 Y System files on hard drive? Continued from “Flowchart 2.11—No OS Loading, Hard Drive, P a r t 2. ” Clean virus. Done N Install OS and reboot. Virus on hard drive? OS loading from hard drive? Y N Y N Y N Diagnostics on disc o[...]

T r oubleshooting Maintenance and Serv ice Guide 2–21 Flo wch ar t 2. 1 3—N o OS Loadin g, Disk et te Driv e Replace the following components individually , retesting after each replacement: ■ Diskette drive ■ System board Done Y N Reseat diskette drive. OS not loading from diskette drive. Done Y Y Y Y Y Y Y N N N N N N N OS loading? Nonsys[...]

2–2 2 Maintenance and Servi ce Guide T r oubleshooting Flo wc har t 2. 1 4—N o OS Loadin g , Opti cal Driv e Y Done N Bootable disc in drive? Disc in drive? No OS loading from CD-ROM or DVD-ROM drive. Install bootable disc and reboot computer . Go to “Flowchart 2.17—Nonfunctioning Device . ” Go to “Flowchart 2.17—Nonfunctioning Device[...]

T r oubleshooting Maintenance and Serv ice Guide 2–2 3 Flo wc har t 2. 1 5—No Audio, P ar t 1 No audio. N Computer in docking device (if applicable)? Internal audio? Audio? Done Undock Audio? Done T urn up audio internally or externally . Go to “Flowchart 2.16—No Audio , Pa r t 2 . ” Go to “Flowchar t 2.17—Nonfunctioning De vice. ” [...]

2–2 4 Maintenance and Servi ce Guide T r oubleshooting Flo wc har t 2. 1 6—N o Audio, P art 2 YN Continued from “Flowchart 2.15—No Audio , Pa r t 1 . ” Reload audio drivers. Audio driver in OS configured? Audio? Y Y Y N N N Correct drivers for application? Connect to external speaker . Load drivers and set configuration in OS. Audio? Done[...]

T r oubleshooting Maintenance and Serv ice Guide 2–2 5 Flo wch ar t 2. 1 7—Nonfunc tioning D e vice Done Any physical device detected? Y N Unplug the nonfunctioning device from the computer and inspect cables and plugs for bent or broken pins or other damage. Reseat device. Clear CMOS. Done Fix o r replace broken item. Nonfunctioning device. Re[...]

2–2 6 Maintenance and Servi ce Guide T r oubleshooting Flo wch ar t 2. 1 8—N onfunc tioning K e yboard Y N Keyboard operating properly? Keyboard not operating properly . External device works? Replace system board. Replace system board. Connect computer to good external keyboard. Reseat internal keyboard connector (if applicable). Replace inter[...]

T r oubleshooting Maintenance and Serv ice Guide 2–2 7 Flo wch ar t 2. 1 9—Nonfun ctionin g P ointing De vice Y N Pointing device not operating properly . External device works? Replace system board. Replace system board. Connect computer to good external pointing device. Reseat internal pointing device connector (if applicable). Replace intern[...]

2–2 8 Maintenance and Servi ce Guide T r oubleshooting Flo wch art 2.20—N o Net wor k/Modem Conne ction Y Disconnect all power from the computer and open. No network or modem connection. N Done Digital line? Network or modem jack active? Replace jack or have jack activated. Connect to nondigital line. NIC/modem configured in OS? Reload drivers [...]

Maintenance and Serv ice Guide 3–1 3 I llustra ted P ar ts C a talog This chapter provides an illustrated parts breakdo wn and a reference for spare part numbers. 3. 1 S erial N umber Location When ordering parts or requesting information, provide the computer serial number and model number located on the bottom of the computer . Seri al Nu mber [...]

3–2 Maintenance and Servi ce Guide Illustrated P arts Catalo g 3.2 Comp uter M ajor Com ponents Comp ut er Ma jor Com po ne nt s[...]

Illustr ated P ar ts Catalog Maintenance and Serv ice Guide 3–3 Ta b l e 3 - 1 Spare P ar ts: Computer Major Components Item Description Spare P ar t Number 1 Display assemb lies (include display cab le, wireless antenna boards, and antenna cables) 15.4-inch, WXGA with BrightView 15.4-inch, WXGA antiglare 407841-001 407839-001 ✎ Refer to Sectio[...]

3–4 Maintenance and Servi ce Guide Illustrated P arts Catalo g Comp ute r Major Componen ts[...]

Illustr ated P ar ts Catalog Maintenance and Serv ice Guide 3–5 Ta b l e 3 - 1 Spare P ar ts: Computer Major Components (Continued) Item Description Spare P ar t Number Cable Kit 407774-001 7a 7b 7c 7d 7e Includes: T ouchP ad cable USB/audio board cable Bluetooth module cable P ow er connector and cable Modem connector and cable 8 Optical drives [...]

3–6 Maintenance and Servi ce Guide Illustrated P arts Catalo g Comp ute r Major Componen ts[...]

Illustr ated P ar ts Catalog Maintenance and Serv ice Guide 3–7 Ta b l e 3 - 1 Spare P ar ts: Computer Major Components (Continued) Item Description Spare P ar t Number Bracket Kit 407820-001 12a 12b 12c 12d Includes: ExpressCard brac ket Expansion por t 2 brack et Displa y hinge suppor t bracket Memor y shield 13 USB/audio board (includes USB/au[...]

3–8 Maintenance and Servi ce Guide Illustrated P arts Catalo g Comp ute r Major Componen ts[...]

Illustr ated P ar ts Catalog Maintenance and Serv ice Guide 3–9 Ta b l e 3 - 1 Spare P ar ts: Computer Major Components (Continued) Item Description Spare P ar t Number 19 Speakers 407784-001 20 Base enclosure F or use with full-featured models F or use with defeatured models 407813-001 407814-001 21 RTC battery (includes 2-sided tape) 407816-001[...]

3–10 Maintenance and Servi ce Guide Illustrated P arts Catalo g 3. 3 Disp lay Assembly Subcom ponents[...]

Illustr ated P ar ts Catalog Maintenance and Serv ice Guide 3–11 T able 3-2 Display Assemb ly Subcomponents Spare P ar t Number Information Item Description 1a 1b Display Plastics Kit , includes: ■ Displa y bezel ■ Displa y enclosure ■ Displa y release latch actuator and hooks (not illustrated) 407792-001 2 Display Hinge Kit 407796-001 3 Di[...]

3–12 Maintenance and Servi ce Guide Illustrated P arts Catalo g 3.4 P la stic s Kit T able 3-3 Plastics Kit Spare P ar t Number Information Item Description Spare P ar t Number Plastics Kit , includes: 407778-001 1 Memor y/Mini PCI module compar tment cover (includes 2 captiv e screws , secured by C-clips) 2 Hard drive cov er (includes 2 capt ive[...]

Illustr ated P ar ts Catalog Maintenance and Serv ice Guide 3–13 3.5 Cab le Kit Ta b l e 3 - 4 Cable Kit Spare P ar t Number Information Item Description Spare P ar t Number Cable Kit , includes: 407774-001 1 T ouchPad cab le 2 Bluetooth module cable 3 USB/audio board cable 4 Modem connector and cable 5 Po wer connector and cabl e[...]

3–14 Maintenance and Servi ce Guide Illustrated P arts Catalo g 3.6 M a s s S t ora ge D e vi ce s[...]

Illustr ated P ar ts Catalog Maintenance and Serv ice Guide 3–15 Ta b l e 3 - 5 Mass Storage Devices Spare P ar t Number Information Item Description Spare P ar t Number 1 Hard drives (include frame and connector) 5400 r pm, 80-GB 407847 -001 4200-rpm, 120-GB 4200-r pm, 100-GB 4200-r pm, 80-GB 4200-r pm, 60-GB 4200-r pm, 40-GB 407848-001 407846-0[...]

3–16 Maintenance and Servi ce Guide Illustrated P arts Catalo g 3.7 Miscell aneous (N ot I llustra ted) Ta b l e 3 - 6 Miscellaneous (Not Illustrated) Spare P ar t Information Description Spare P ar t Number All-in-one media cable 375759-001 A udio Y-cable 2 379452-001 HP Remote Control II 407313-001 Label Kit 407776-001 P ower supply , 65 watt 4[...]

Illustr ated P ar ts Catalog Maintenance and Serv ice Guide 3–17 Screw Kit (includes the f ollowing scre ws; refer to Appendix C , “Screw Listing, ” for more inf ormation on specifications and usage) 407782-001 ■ Phillips PM3.0×6.0 Screw ■ Phillips PM3.0×3.0 screw ■ Phillips PM2.5×11.0 screw ■ Phillips PM2.5×7.0 Screw ■ Phillips[...]

3–18 Maintenance and Servi ce Guide Illustrated P arts Catalo g 3.8 Sequen tial P art N umber Listin g Ta b l e 3 - 7 Sequential P ar t Number Listing Spare P ar t Number Description 309674-001 USB tra vel mouse 364727-001 USB digital drive 371693-001 Wired headset with volume control 375759-001 All-in-one media cable 379452-001 A udio Y -cab le [...]

Illustr ated P ar ts Catalog Maintenance and Serv ice Guide 3–19 403806-001 D VD±RW and CD-R W Double La yer Combo Drive with LightScribe 403810-001 P ow er supply , 65 watt 403811-001 P ow er cord for use in the United States 403811-021 P ow er cord for use internationally 403811-031 P ow er cord for us e in the United Kingdom 403811-061 P ow e[...]

3–20 Maintenance and Servi ce Guide Illustrated P arts Catalo g 407794-001 Displa y Screw Kit 407796-001 Displa y HInge Kit 407798-001 Displa y panel kit fo r use with antiglare displa ys 407799-001 Displa y panel kit for use with BrightView displa ys 407800-001 Displa y inverter board 407802-001 USB/audio board fo r us e with full-featured compu[...]

Illustr ated P ar ts Catalog Maintenance and Serv ice Guide 3–21 407834-001 6-cell, 4.0-Amp hour batter y pack 407835-001 12-cell, 8.8-Amp hour batter y pack 407836-001 AMD T urion 64 ML-34 (1.8-GHz) processor (includes thermal paste) 407837-001 AMD Sempron M3000 (1 .8-GHz) processor (includes thermal paste) 407838-001 AMD Sempron M3300 (2 .0-GHz[...]

3–2 2 Maintenance and Servi ce Guide Illustrated P arts Catalo g 407857-081 K eyboard f or use in Denmark 407857-091 K eyboard f or use in Norwa y 407857-111 K eyboard f or use in Switzerland 407857-121 K eyboard f or use in F rench Canada 407857-131 K eyboard f o r use in P or tugal 407857-151 K eyboard f or use in Greece 407857-A41 K eyboard f [...]

Maintenance and Serv ice Guide 4–1 4 Remo v al and Rep la cemen t Preliminaries This chapter provides essential information for proper and safe remov al and replacement service. 4. 1 T ools Required Y ou will need the following tools to complete the remov al and replacement procedures: ■ Magnetic scre wdriv er ■ Phillips P0 scre wdriv er ■ [...]

4–2 Maintenance and Servi ce Guide Remo val and R eplacement Pr eliminari es 4.2 Ser vice Consi dera tions The follo wing sections include some of the considerations that you should keep in mind during disassembly and assembly procedures. ✎ As you remov e each subassembly from the computer , place the subassembly (and all accompanying scre ws) [...]

Remo val and R eplacement Pr eliminarie s Maintenance and Serv ice Guide 4–3 4. 3 Pr e v ent ing Damage to Re mo v able Dri v es Remov able dri ves are fragile components that must be handled with care. T o prev ent damage to the computer , damage to a remov able dri ve, or loss of information, observe the follo wing precautions: ■ Before remov[...]

4–4 Maintenance and Servi ce Guide Remo val and R eplacement Pr eliminari es 4.4 Pre v enting Elec trosta tic D ama ge Many electronic components are sensiti ve to electrostatic discharge (ESD). Circuitry design and structure determine the degree of sensiti vity . Networks built into man y integrated circuits provide some protection, b ut in many[...]

Remo val and R eplacement Pr eliminarie s Maintenance and Serv ice Guide 4–5 4.5 P ac k agin g and T ranspor ting Precautions Use the follo wing grounding precautions when packaging and transporting equipment: ■ T o av oid hand contact, transport products in static-safe containers, such as tubes, bags, or boxes. ■ Protect all electrostatic-se[...]

4–6 Maintenance and Servi ce Guide Remo val and R eplacement Pr eliminari es 4.6 W orksta tion Precau tions Use the follo wing grounding precautions at workstations: ■ Cov er the workstation with approv ed static-shielding material (refer to T able 4-2, “Static-Shielding Materials” ). ■ Use a wrist strap connected to a properly grounded w[...]

Remo val and R eplacement Pr eliminarie s Maintenance and Serv ice Guide 4–7 ■ When standing, use foot straps and a grounded floor mat. Foot straps (heel, toe, or boot straps) can be used at standing workstations and are compatible with most types of shoes or boots. On conducti ve floors or dissipati ve floor mats, use foot straps on both feet [...]

4–8 Maintenance and Servi ce Guide Remo val and R eplacement Pr eliminari es T able 4-1 shows ho w humidity affects the electrostatic v oltage le vels generated by dif ferent acti vities. T able 4-2 lists the shielding protection provided by antistatic bags and floor mats. Ta b l e 4 - 1 T ypical Electrostatic V oltage Le vels Relative Humidity E[...]

Maintenance and Serv ice Guide 5–1 5 Remo v al and Rep la cemen t Procedur es This chapter provides remo val and replacement procedures. There are as many 100 scre ws, in 12 dif ferent sizes, that may hav e to be remov ed, replaced, or loosened when servicing the computer . Make special note of each scre w size and location during remov al and re[...]

5–2 Maintenance and Servi ce Guide Remo val and R eplacement Pr ocedur es 5 .2 Disasse mbly Sequence C hart Use the chart belo w to determine the section number to be referenced when removing computer components. Disassembl y Sequence Char t Section Description # of Screws Remo ved 5.3 Preparing the Computer for Disassembly Batter y pack 0 5.4 Ha[...]

Remo val and R eplacement Pr ocedures Maintenance and Serv ice Guide 5–3 Section Description # of Screws Remo ved 5.9 Optical Drive 1 to remove to optical drive 2 to remov e the optical drive brack et 5.10 Switch Cov er 7 5.11 K eyboard F rame 1 5.12 LED Board 5 5.13 Key b o a r d 4 5.14 Displa y Assembly 4 to remov e the displa y assembly 8 to r[...]

5–4 Maintenance and Servi ce Guide Remo val and R eplacement Pr ocedur es 5 .3 Preparing th e Co mpu ter for Disasse mbl y Before you begin an y remov al or installation procedures: 1. Shut do wn the computer . If you are unsure whether the computer is of f or in hibernation, turn the computer on, and then shut it do wn through the operating syst[...]

Remo val and R eplacement Pr ocedures Maintenance and Serv ice Guide 5–5 b . Slide the battery pack release latch 1 to the left. (The battery pack disengages from the computer .) c. Lift the front edge of the battery pack 2 and swing it back to remov e it. Re mov ing the Battery P ack Re verse the abov e procedure to install the battery pack.[...]

5–6 Maintenance and Servi ce Guide Remo val and R eplacement Pr ocedur es 5 .4 Hard Driv e 1. Prepare the computer for disassembly (refer to Section 5.3 ). Hard Drive Spare P ar t Number Information 5400 r pm, 80-GB 407847-001 4200-rpm, 120-GB 4200-rpm, 100-GB 4200-rpm, 80-GB 4200-rpm, 60-GB 4200-rpm, 40-GB 407848-001 407846-001 410053-001 407845[...]

Remo val and R eplacement Pr ocedures Maintenance and Serv ice Guide 5–7 2. Loosen the two black Phillips PM2.5×5.0 scre ws 1 that secure the hard dri ve cov er to the computer . 3. Lift the left edge of the hard dri ve cov er 2 and swing it up and to the right and remov e it. ✎ The hard dri ve cov er used on Pa vilion models is included in th[...]

5–8 Maintenance and Servi ce Guide Remo val and R eplacement Pr ocedur es 4. Remov e the two Phillips PM2.5×6.0 hard dri ve retention scre ws 1 that secure the hard driv e to the computer . 5. Slide the hard dri ve 2 to the right to disconnect if from the system board. 6. Remov e the hard driv e 3 from the hard driv e bay . Re mov ing the Hard D[...]

Remo val and R eplacement Pr ocedures Maintenance and Serv ice Guide 5–9 7. Remov e the four Phillips PM3.0×3.0 hard driv e frame scre ws 1 that secure the hard driv e frame to the hard driv e. 8. Lift the hard dri ve straight up 2 to remov e it from the hard dri ve frame. Re mov ing the Hard Dr i ve F r ame Re verse the abov e procedure to reas[...]

5–10 Maintenance and Servi ce Guide Remo val and R eplacement Pr ocedur es 5. 5 C o m p u t e r F e e t The computer feet are adhesi ve-backed rubber pads. The feet are included in the Plastics Kit, spare part number 407778-001. Rep l a ci n g t h e Co m p ut e r Fe et[...]

Remo val and R eplacement Pr ocedures Maintenance and Serv ice Guide 5–11 5. 6 M e m o r y M o d u l e 1. Prepare the computer for disassembly (refer to Section 5.3 ). 2. Loosen the two black Phillips PM2.5×5.0 scre ws 1 that secure the memory/Mini PCI module compartment cov er to the computer . 3. Lift the right side of the cov er 2 and swing i[...]

5–12 Maintenance and Servi ce Guide Remo val and R eplacement Pr ocedur es 4. Loosen the two Phillips PM2.5×3.0 scre ws 1 that secure the memory module shield to the computer . 5. Lift the left side of the shield 2 and swing it to the right until it is resting in an upright position. ✎ The memory shield is included in the Bracket Kit, spare pa[...]

Remo val and R eplacement Pr ocedures Maintenance and Serv ice Guide 5–13 6. Spread the retaining tabs 1 on each side of the memory module socket to release the memory module. (The edge of the module opposite the socket rises a way from the computer .) 7. Remov e the memory module by pulling the module a way from the socket at an angle 2 . ✎ Me[...]

5–14 Maintenance and Servi ce Guide Remo val and R eplacement Pr ocedur es 5 .7 Mini PCI Communi ca tions Module 1. Prepare the computer for disassembly ( Section 5.3 ). 2. Remov e the memory/Mini PCI module compartment cov er ( Section 5.6 ). Mini PCI Communications Module Spare P ar t Number Information 802.11a/b/g WLAN module fo r use in Nor t[...]

Remo val and R eplacement Pr ocedures Maintenance and Serv ice Guide 5–15 ✎ Before disconnecting the antenna cables, make note of which cable is attached to which antenna clip on the Mini PCI communications card. 3. Disconnect the auxiliary and main 1 antenna cables from the Mini PCI communications module. 4. Spread the two retaining tabs 2 on [...]

5–16 Maintenance and Servi ce Guide Remo val and R eplacement Pr ocedur es 5. 8 R TC B a t t e r y 1. Prepare the computer for disassembly ( Section 5.3 ). 2. Remov e the memory/Mini PCI module compartment cov er ( Section 5.6 ). 3. Remov e the Mini PCI communications module ( Section 5.7 ). 4. Remov e the R TC battery from the socket on the syst[...]

Remo val and R eplacement Pr ocedures Maintenance and Serv ice Guide 5–17 5 .9 Optical Driv e 1. Prepare the computer for disassembly ( Section 5.3 ). 2. Position the computer with the left side to ward you. 3. Remov e the Phillips PM2.5×11.0 screw 1 that secures the optical dri ve to the computer . 4. Push the rear edge of the optical dri ve 2 [...]

5–18 Maintenance and Servi ce Guide Remo val and R eplacement Pr ocedur es 6. If it is necesary to replace th e optical dri ve bracket, remo ve the two Phillips PM2.0×4.0 scre ws 1 that secure the bracket to the optical dri ve. 7. Remov e the optical driv e bracket 2 . Remo ving the Optical Dr iv e Br ack et Re verse the abov e procedure to inst[...]

Remo val and R eplacement Pr ocedures Maintenance and Serv ice Guide 5–19 5. 1 0 Swi t c h C ove r 1. Prepare the computer for disassembly ( Section 5.3 ). 2. Remov e the following scre ws: 1 T wo Phillips PM2.5×11.0 scre ws 2 Three Phillips PM2.5×6.0 scre ws 3 T wo silver Phillips PM2.5×5.0 scre ws Re mov ing the S w itch C ov er Sc re ws Swi[...]

5–20 Maintenance and Servi ce Guide Remo val and R eplacement Pr ocedur es 3. T urn the computer display-side up with front toward you. 4. Open the computer as far as possible. 5. Insert a flat-bladed tool under the display hinge cov er 1 sections of the switch cov er . 6. Lift the switch cov er until the left and right sides 2 of the switch cov [...]

Remo val and R eplacement Pr ocedures Maintenance and Serv ice Guide 5–21 5. 1 1 Ke yb o a rd Fr a m e 1. Prepare the computer for disassembly ( Section 5.3 ). 2. Remov e the memory/Mini PCI module compartment cov er ( Section 5.6 ). 3. Remov e the switch cov er ( Section 5.10 ). 4. T urn the computer upside down with the rear panel to ward you. [...]

5–2 2 Maintenance and Servi ce Guide Remo val and R eplacement Pr ocedur es 6. T urn the computer display-side up with front toward you. 7. Open the computer as far as possible. 8. Slide the ke yboard frame 1 tow ard the back of the computer . 9. Lift and hold the rear edge of the ke yboard frame 2 until the LED board cable connector is accessibl[...]

Remo val and R eplacement Pr ocedures Maintenance and Serv ice Guide 5–2 3 10. Release the zero insertion force (ZIF) connector 1 to which the LED board cable is connected and disconnect the cable 2 . Disconnecting the LED Boar d Cable[...]

5–2 4 Maintenance and Servi ce Guide Remo val and R eplacement Pr ocedur es 11. Swing the ke yboard frame 1 forward until the assembly rests upside do wn on the palm rest. 12. Release the ZIF connector to which the ke yboard cable 2 is attached and disconnect the ke yboard cable 3 . 13. Remov e the keyboard frame. Re mov ing the K e yboar d F ram[...]

Remo val and R eplacement Pr ocedures Maintenance and Serv ice Guide 5–2 5 5 . 1 2 LED Board 1. Prepare the computer for disassembly ( Section 5.3 ) and then remov e the following components: a. Memory/Mini PCI module compartment cov er ( Section 5.6 ) b . Switch co ver ( Section 5.10 ) c. K eyboard frame ( Section 5.11 ) 2. T urn the keyboard fr[...]

5–2 6 Maintenance and Servi ce Guide Remo val and R eplacement Pr ocedur es 3. Remov e the fi ve Phillips PM2.0×4.0 scre ws 1 that secure the LED board to the ke yboard frame. 4. Remov e the LED board 2 . Re mov ing the LED Board Re verse the abov e procedure to install the LED board.[...]

Remo val and R eplacement Pr ocedures Maintenance and Serv ice Guide 5–2 7 5. 1 3 Ke y b o a r d 1. Prepare the computer for disassembly ( Section 5.3 ). 2. Remov e the switch cov er ( Section 5.10 ). 3. Remov e the keyboard frame ( Section 5.11 ). 4. T urn the keyboard assembly upside do wn with the LED board to ward you. Ke yboard Spare P art N[...]

5–2 8 Maintenance and Servi ce Guide Remo val and R eplacement Pr ocedur es 5. Remov e the four Phillips PM2.0×3.0 screws 1 that secure the ke yboard to the keyboard frame. 6. Remov e the tabs on the bottom of the keyboard from the slots in the ke yboard frame. 7. Remov e the keyboard 2 . Remo ving the K eyboar d Re verse the abov e procedure to[...]

Remo val and R eplacement Pr ocedures Maintenance and Serv ice Guide 5–2 9 5 . 1 4 Displa y Assembl y 1. Prepare the computer for disassembly ( Section 5.3 ). 2. Remov e the memory/Mini PCI module compartment cov er ( Section 5.6 ). 3. Disconnect the wireless antenna cables from the Mini PCI communications module ( Section 5.7 ). Display Assemb l[...]

5–30 Maintenance and Servi ce Guide Remo val and R eplacement Pr ocedur es 4. Remov e the switch cov er ( Section 5.10 ). 5. Remov e the keyboard frame ( Section 5.11 ). 6. Remov e the keyboard ( Section 5.13 ). 7. Disconnect the display cable 1 from the system board. 8. Remov e the wireless antenna cables from the clips 2 in the top cov er . Dis[...]

Remo val and R eplacement Pr ocedures Maintenance and Serv ice Guide 5–31 Ä CAUT ION: Support the display a ssembl y when r emov ing the fo llow ing scr ews . F ailure to support the displa y assembl y can re sult in damage to the display a ssembly and othe r computer components . 9. Remov e the four Phillips PM2.5×7.0 screws 1 that secure the [...]

5–3 2 Maintenance and Servi ce Guide Remo val and R eplacement Pr ocedur es Display Assemb ly Subcomponents Spare P ar t Number Information Displa y Plastics Kit, includes: ■ Displa y bezel ■ Displa y enclosure ■ Displa y release latch actuator and hooks 407792-001 Displa y Hinge Kit 407796-001 Displa y inv er ter board 407800-001 Displa y [...]

Remo val and R eplacement Pr ocedures Maintenance and Serv ice Guide 5–3 3 11. Remov e the eight rubber screw co vers 1 and 2 and the eight Phillips PM2.5×7.0 scre ws 3 that secure the display bezel to the display assembly . ✎ The rubber scre w covers are included in the Display Scre w Kit, spare part number 407794-001. The four rubber scre w [...]

5–34 Maintenance and Servi ce Guide Remo val and R eplacement Pr ocedur es ✎ The display bezel and display enclosure are av ailable in the Display Plastics Kit, spare part number 407792-001. 12. Flex the inside edges of the left and right sides 1 and the top and bottom sides 2 of the display bezel until the bezel disengages from the display enc[...]

Remo val and R eplacement Pr ocedures Maintenance and Serv ice Guide 5–3 5 14. Disconnect the follo wing cables: 1 Display panel cable 2 W ireless light cable 3 Display in verter board cable Disconnecting the Displa y P anel Cables[...]

5–3 6 Maintenance and Servi ce Guide Remo val and R eplacement Pr ocedur es 15. Remov e the two Phillips PM2.5×7.0 scre ws 1 that secure the display panel to the display enclosure. 16. Remov e the display panel 2 and in verter board 3 . Remo v ing the Display P anel and Inve r ter Boar d Display Assemb ly Subcomponents Spare P ar t Number Inform[...]

Remo val and R eplacement Pr ocedures Maintenance and Serv ice Guide 5–3 7 ✎ The display release hook arm and spring are av ailable in the Display Hinge Kit, spare part number 407796-001. 17. If it is necessary to replace the display release hook arm, slide and hold the arm 1 to the right. 18. Slide the right side of the arm 2 forward until it [...]

5–38 Maintenance and Servi ce Guide Remo val and R eplacement Pr ocedur es ✎ The display hinges are av ailable in the Display Hinge Kit, spare part numbers 407796-001. 22. If it is necessary to replace the display hinges, remov e the four Phillips PM2.0×4.0 scre ws 1 that secure each hinge to the display panel. 23. Remov e the display hinges 2[...]

Remo val and R eplacement Pr ocedures Maintenance and Serv ice Guide 5–3 9 24. Remov e the Phillips PM2.0×4.0 screws 1 that secure the left and right wireless antenna transcei vers to the display enclosure. 25. Release the retention tabs 2 b uilt in to the display enclosure lining that secure the wireless antenna cables to the display enclosure.[...]

5–40 Maintenance and Servi ce Guide Remo val and R eplacement Pr ocedur es 5. 1 5 Top C ove r 1. Prepare the computer for disassembly ( Section 5.3 ) and then remov e the following components: a. Hard dri ve ( Section 5.4 ) b . Memory/Mini PCI module compartment co ver ( Section 5.6 ) c. Optical dri ve ( Section 5.7 ) d. Switch cov er ( Section 5[...]

Remo val and R eplacement Pr ocedures Maintenance and Serv ice Guide 5–41 2. T urn the computer upside down with the front to ward you. 3. Remov e the two Phillips PM2.5×3.0 scre ws 1 in the optical dri ve bay and the silver Phillips PM2.5×5.0 scre w 2 in the hard dri ve bay that secure the top cov er to the computer . Re mov ing the T op Cov e[...]

5–4 2 Maintenance and Servi ce Guide Remo val and R eplacement Pr ocedur es 4. Remov e the eight Phillips PM2.5×11.0 screws that secure the top cov er to the computer . Re mov ing the T op Cov er Sc r ew s, P art 2[...]

Remo val and R eplacement Pr ocedures Maintenance and Servi ce Guide 5 –4 3 5. T urn the computer right-side up with the front toward you. 6. Release the ZIF connector to which the T ouchPad cable 1 is connected and disconnect the T ouchPad cable 2 from the system board. ✎ The T ouchPad cable is included in the Cable Kit, spare part number 4077[...]

5–44 Maintenance and Servi ce Guide Remo val and R eplacement Pr ocedur es 7. Remov e the sev en Phillips PM2.5×11.0 scre ws that secure the top cov er to the computer . Re mov ing the T op Cov er Sc r ew s, P art 3[...]

Remo val and R eplacement Pr ocedures Maintenance and Serv ice Guide 5–4 5 8. Remov e the three silver PM2.5×5.0 scre ws that secure the top cov er to the computer . Re mov ing the T op Cov er Sc r ew s, P art 4[...]

5–46 Maintenance and Servi ce Guide Remo val and R eplacement Pr ocedur es 9. Lift up the rear edge of the top cov er 1 until it disengages from the base enclosure. 10. Lift the top cov er 2 straight up and remov e it. Re mov ing the T op Cov er[...]

Remo val and R eplacement Pr ocedures Maintenance and Serv ice Guide 5–4 7 11. If it is necessary to replace the T ouchPad cable, release the ZIF connector to which the T ouchPad cable 1 is connected and disconnect the T ouchPad cable 2 from the T ouchPad board. 12. Remov e the T ouchPad cable . ✎ The T ouchPad cable is included in the Cable Ki[...]

5–48 Maintenance and Servi ce Guide Remo val and R eplacement Pr ocedur es 5 . 1 6 Bluetooth Modul e 1. Prepare the computer for disassembly ( Section 5.3 ), and then remov e the following components: a. Hard dri ve ( Section 5.4 ) b . Memory/Mini PCI module compartment co ver ( Section 5.6 ) c. Optical dri ve ( Section 5.9 ) d. Switch cov er ( S[...]

Remo val and R eplacement Pr ocedures Maintenance and Serv ice Guide 5–4 9 2. Remov e the Phillips PM2.0×4.0 screw 1 that secures the Bluetooth module to the base enclosure. 3. Remov e the Bluetooth module from the base enclosure 2 . 4. Remov e the Bluetooth module cable 3 from the routing channel in the base enclosure. 5. Disconnect the Bluetoo[...]

5–50 Maintenance and Servi ce Guide Remo val and R eplacement Pr ocedur es 5. 1 7 Sys t e m B o a r d ✎ When replacing the system board, ensure that the follo wing components are remov ed from the defectiv e system board and installed on the replacement system board: ■ Memory modules ( Section 5.6 ) ■ Mini PCI communications module ( Sectio[...]

Remo val and R eplacement Pr ocedures Maintenance and Serv ice Guide 5–51 2. T urn the computer right-side up with the front toward you. 3. Press in on the ExpressCard slot bezel 1 to release it. 4. Remov e the ExpressCard slot bezel 2 . ✎ The ExpressCard slot bezel is included in the Plastics Kit, spare part number 407778-001. Remo v ing the E[...]

5–5 2 Maintenance and Servi ce Guide Remo val and R eplacement Pr ocedur es 5. Remov e the PM2.5×6.0 screw 1 that secures the display hinge support to the base enclosure. 6. Remov e the display hinge support 2 . 7. Remov e the power connector 3 from the clip in the base enclosure. 8. Remov e the power connector cable 4 from the clips in t h eb a[...]

Remo val and R eplacement Pr ocedures Maintenance and Serv ice Guide 5–5 3 9. Disconnect the USB/audio board cable 1 and modem cable 2 from the system board. Disconnecting the Modem and U SB/Audi o Board Ca bles[...]

5–54 Maintenance and Servi ce Guide Remo val and R eplacement Pr ocedur es 10. Remov e the two Phillips PM2.5×11.0 scre ws 1 and the three Phillips PM2.5×6.0 scre ws 2 that secure the system board to the base enclosure. 11. Remov e the ExpressCard bracket 3 . ✎ The ExpressCard bracket is included in the Bracket Kit, spare part number 407820-0[...]

Remo val and R eplacement Pr ocedures Maintenance and Servi ce Guide 5–5 5 12. Use the optical dri ve connector 1 to lift the right side of the system board 2 until it is clear of the base enclosure. 13. Slide the system board 3 to the right at an angle and re move i t. Re mov ing the S ys tem Board[...]

5–5 6 Maintenance and Servi ce Guide Remo val and R eplacement Pr ocedur es 14. If it is necessary to replace th e po wer connector cable, turn the system board upside do wn with the expansion port 2 docking connector to ward you. 15. Disconnect the po wer connector cable 1 from the system board. 16. Remov e the power connector cable 2 . ✎ The [...]

Remo val and R eplacement Pr ocedures Maintenance and Serv ice Guide 5–5 7 17. If it is necessary to replace the modem connector and cable, remov e the modem connector 1 and cable 2 from the clips and routing channel in the base enclosure. ✎ The modem connector and cable is av ailable in the Cable Kit, spare part number 407774-001. Remo v ing t[...]

5–5 8 Maintenance and Servi ce Guide Remo val and R eplacement Pr ocedur es 5 . 1 8 U SB/Audio B oard 1. Prepare the computer for disassembly ( Section 5.3 ), and then remov e the following components: a. Hard dri ve ( Section 5.4 ) b . Optical dri ve ( Section 5.9 ) c. Switch cov er ( Section 5.10 ) d. K eyboard assembly ( Section 5.11 ) e. Disp[...]

Remo val and R eplacement Pr ocedures Maintenance and Serv ice Guide 5–5 9 2. Remov e the Phillips PM2.5×6.0 screw 1 that secures the USB/audio board to the base enclosure. 3. Remov e the USB/audio board 2 from the base enclosure. 4. Disconnect the USB/audio board cable 3 from the USB/audio board. ✎ The USB/audio board cable is av ailable in t[...]

5–60 Maintenance and Servi ce Guide Remo val and R eplacement Pr ocedur es 5 . 1 9 Hea t Sink 1. Prepare the computer for disassembly ( Section 5.3 ), and then remov e the following components: a. Hard dri ve ( Section 5.4 ) b . Memory/Mini PCI module compartment co ver ( Section 5.6 ) c. Optical dri ve ( Section 5.9 ) d. Switch cov er ( Section [...]

Remo val and R eplacement Pr ocedures Maintenance and Serv ice Guide 5–61 2. T urn the system board upside down with the expansion port 2 to ward you. 3. Remov e the four Phillips PM2.5×6.0 screws 1 that secure the heat sink to the system board. 4. Remov e the heat sink 2 . ✎ Due to the adhesi ve quality of the thermal paste located between th[...]

5–6 2 Maintenance and Servi ce Guide Remo val and R eplacement Pr ocedur es ✎ The thermal paste should be thoroughly cleaned from the surfaces of the heat sink 1 and processor 2 each time the heat sink is remov ed. Thermal paste should be reapplied to both surfaces before the heat sink is reinstalled. Thermal paste is included with all heat sin[...]

Remo val and R eplacement Pr ocedures Maintenance and Serv ice Guide 5–6 3 5. 2 0 P r o c es s o r ✎ The computer may be equipped with a processor socket that features either a locking scre w or a release arm. Both types of sockets are documented in this section. 1. Prepare the computer for disassembly ( Section 5.3 ), and then remov e the foll[...]

5–64 Maintenance and Servi ce Guide Remo val and R eplacement Pr ocedur es ✎ Steps 2 and 3 apply to processor sockets equipped with a locking scre w . Refer to steps 4 through 6 for instructions on removing a processor from a sock et equipped with a release arm. 2. Use a flat-bladed scre wdriv er to turn the processor locking scre w 1 one-quart[...]

Remo val and R eplacement Pr ocedures Maintenance and Servi ce Guide 5–6 5 ✎ Steps 4 through 6 apply to processor sockets equipped with a release arm. 4. Slide the tip of the processor socket release arm 1 to the right until it clears the notch 2 on the processor socket. 5. Swing the processor socket release arm 3 up and back as far as it will [...]

5–66 Maintenance and Servi ce Guide Remo val and R eplacement Pr ocedur es 5. 2 1 F a n A s s e m b l y 1. Prepare the computer for disassembly ( Section 5.3 ), and then remov e the following components: a. Hard dri ve ( Section 5.4 ) b . Memory/Mini PCI module compartment co ver ( Section 5.6 ) c. Optical dri ve ( Section 5.9 ) d. Switch cov er [...]

Remo val and R eplacement Pr ocedures Maintenance and Serv ice Guide 5–6 7 2. Disconnect the fan cable 1 from the system board. 3. Remov e the following scre ws: 2 One Phillips PM2.5×3.0 scre w that secures the expansion port 2 bracket to the system board 3 T wo slotted M1.5×9.0 screws on each side of the expansion port 2 connector that secure [...]

5–6 8 Maintenance and Servi ce Guide Remo val and R eplacement Pr ocedur es 4. Slide the expansion port bracke t 1 away from the system board. 5. Remov e the fan assembly 2 . Re mov ing the F an Assembl y Re verse the abov e procedure to install the fan assembly .[...]

Remo val and R eplacement Pr ocedures Maintenance and Servi ce Guide 5–6 9 5. 22 S p e a ke r s 1. Prepare the computer for disassembly ( Section 5.3 ), and then remov e the following components: a. Hard dri ve ( Section 5.4 ) b . Memory/Mini PCI module compartment co ver ( Section 5.6 ) c. Optical dri ve ( Section 5.9 ) d. Switch cov er ( Sectio[...]

5–7 0 Maintenance and Servi ce Guide Remo val and R eplacement Pr ocedur es 2. T urn the system board top-side up with the expansion port 2 to ward you. 3. Disconnect the speaker cable 1 from the system board. 4. Remov e the PM2.5×6.0 screw 2 that secures the speak er to the system board. 5. Slide the speaker 3 forward and remo ve it from the sy[...]

Remo val and R eplacement Pr ocedures Maintenance and Serv ice Guide 5–71 5. 23 PC C a rd A s s e m b l y 1. Prepare the computer for disassembly ( Section 5.3 ), and then remov e the following components: a. Hard dri ve ( Section 5.4 ) b . Memory/Mini PCI module compartment co ver ( Section 5.6 ) c. Optical dri ve ( Section 5.9 ) d. Switch cov e[...]

5–7 2 Maintenance and Servi ce Guide Remo val and R eplacement Pr ocedur es 2. T urn the system board upside down with the expansion port 2 to ward you. 3. Remov e the two PM2.0×4.0 scre ws that secure the PC Card assembly to the system board. Re mov ing the PC C ard As sembl y Scr e ws[...]

Remo val and R eplacement Pr ocedures Maintenance and Serv ice Guide 5–7 3 4. T urn the system board top-side up with the expansion port 2 to ward you. 5. Disengage the hooks 1 on the PC Card assembly from the slots on the PC Card connector 2 . 6. Remov e the PC Card assembly from the system board 3 . Re mov ing the PC C ard As sembl y Re verse t[...]

5–7 4 Maintenance and Servi ce Guide Remo val and R eplacement Pr ocedur es 5 .2 4 ExpressCard As semb ly 1. Prepare the computer for disassembly ( Section 5.3 ), and then remov e the following components: a. Hard dri ve ( Section 5.4 ) b . Memory/Mini PCI module compartment co ver ( Section 5.6 ) c. Optical dri ve ( Section 5.9 ) d. Switch cov e[...]

Remo val and R eplacement Pr ocedures Maintenance and Serv ice Guide 5–7 5 2. T urn the system board upside down with the expansion port 2 to ward you. 3. Remov e the two PM2.0×4.0 scre ws that secure the ExpressCard assembly to the system board. Remo v ing the Expres sCar d Assembly S cr ew s[...]

5–7 6 Maintenance and Servi ce Guide Remo val and R eplacement Pr ocedur es 4. T urn the system board top-side up with the expansion port 2 to ward you. 5. Remov e the ExpressCard assembly from the system board. Remo v ing the Expres sCar d Assembly Re verse the abov e procedures to install the ExpressCard assembly .[...]

Maintenance and Serv ice Guide 6–1 6 Spec ifica tions This chapter provides physical and performance specif ications. Ta b l e 6 - 1 Computer Dimensions Metric U .S. Height F ront Rear Width Depth 3.50 cm 4.50 cm 35.79 cm 26.39 cm 1.38 in 1.77 in 14.09 in 10.39 in W eight With 17.0-inch displa y , optical drive and 8-cell batter y pack 2.99 kg 6.[...]

6–2 Maintenance and Servi ce Guide Spe cificat ions Relative humidity (noncondensing) Operating Nonoperating 10% to 90% 5% to 95% 10% to 90% 5% to 95% Maximum altitude (unpressurized) Operating (14.7 to 10.1 psia) Nonoperating (14.7 to 4.4 psia) -15 m to 3,048 m -15 m to 12,192 m -50 ft to 10,000 ft -50 ft to 40,000 ft Shock Operating Nonoperatin[...]

Specific at ions Maintenance and Serv ice Guide 6–3 Ta b l e 6 - 2 15.4-inch, WXGA, Displa y Dimensions Height Width Diagonal 20.7 cm 33.1 cm 39.1 cm 8.15 in 13.03 in 15.39 in Number of colors Up to 16.8 million Contrast ratio 200:1 Brightness 180 nits typical Pixel resolution Pitch Fo r ma t Configuration 0.259 × 0.259 mm 1280 × 800 RGB vertic[...]

6–4 Maintenance and Servi ce Guide Spe cificat ions Ta b l e 6 - 3 Hard Drives 120-GB* 100-GB* 80-GB* Dimensions Height Width We i g h t 9.5 mm 70 mm 102 g 9.5 mm 70 mm 102 g 9.5 mm 70 mm 99 g Interface type ATA - 5 ATA - 5 ATA - 5 T ransfer rate Synchronous (maximum) Security 100 MB/sec A T A security 100 MB/sec ATA s e c u r i t y 100 MB/sec A [...]

Specific at ions Maintenance and Serv ice Guide 6–5 80-GB* 60-GB* 40-GB* Dimensions Height Width We i g h t 9.5 mm 70 mm 99 g 9.5 mm 70 mm 99 g 9.5 mm 70 mm 99 g Interface type ATA - 5 ATA - 5 ATA - 5 T ransfer rate Synchronous (maximum) Security 100 MB/sec A T A security 100 MB/sec ATA s e c u r i t y 100 MB/sec A T A security Seek times (typica[...]

6–6 Maintenance and Servi ce Guide Spe cificat ions Ta b l e 6 - 4 D VD/CD-R W Combo Drive Applicable disc Read: D VD-R, D VD-RW , D VD-ROM (D VD-5, D VD-9, D VD-10, D VD-18), CD-ROM (Mode 1 and 2) CD Digital A udio, CD-XA ready (Mode 2, F or m 1 and 2), CD-I ready (Mode 2, F or m 1 and 2), CD-R, CD-R W , Photo CD (single and multisession), and C[...]

Specific at ions Maintenance and Serv ice Guide 6–7 Access time CD media D VD media Random Full stroke < 110 ms < 210 ms < 130 ms < 225 ms A udio output level Line-out, 0.7 V rms Cache buff er 2 MB Data transfer rate CD-R (24X) CD-R W (10X) CD-ROM (24X) DV D ( 8 X ) Multiword DMA mode 2 3600 KB/s (150 KB/ s at 1X CD rate) 1500 KB/s (1[...]

6–8 Maintenance and Servi ce Guide Spe cificat ions Ta b l e 6 - 5 DV D ± RW and CD-R W Double La yer Combo Drive Applicable disc Read: D VD-R, D VD-RW , D VD-ROM (D VD-5, D VD-9, D VD-10, D VD-18), CD-ROM (Mode 1 and 2), CD Digital A udio, CD-XA ready (Mode 2, F or m 1 and 2), CD-I ready (Mode 2, F or m 1 and 2), CD-R, CD-R W , Photo CD (single[...]

Specific at ions Maintenance and Serv ice Guide 6–9 Access time CD D VD Random Full stroke < 175 ms < 285 ms < 230 ms < 335 ms A udio output level A udio-out, 0.7 Vr ms Cache buff er 2 MB Data transfer rate CD-R (16X) CD-R W (8X) CD-ROM (24X) DV D ( 8 X ) D VD-R (4X) DV D - R W ( 2 X ) Multiword DMA mode 2 2,400 KB/s (150 KB/s at 1X C[...]

6–10 Maintenance and Servi ce Guide Spe cificat ions Ta b l e 6 - 6 System Interrupts Hard ware IRQ System Function IRQ0 System timer IRQ1 Standard 101-/102-K ey or Microsoft Natura l Ke yboard IRQ2 Cascaded IRQ3 USB2 Enhanced Ho st Controller—24CD IRQ4 COM1 IRQ5* Cone xant AC—Link A udio Data F ax Modem with Smar tCP IRQ6 Diskette drive IRQ7[...]

Specific at ions Maintenance and Serv ice Guide 6–11 IRQ11 TI OHCI 1394 host controller TI PCI1410 CardBus controller IRQ12 Synaptics PS/2 T ouchP ad IRQ13 Numeric data processor IRQ14 Primar y IDE channel IRQ15 Secondar y IDE channel *Def ault configuration; audio possible configur ations are IRQ5, IRQ7, IRQ9, IRQ10, or none. ✎ PC Cards may as[...]

6–12 Maintenance and Servi ce Guide Spe cificat ions Ta b l e 6 - 7 System I/O Addresses I/O Address (he x) System Function (shipping configuration) 000 - 00F DMA controller no . 1 010 - 01F Unused 020 - 021 Interrupt controller no . 1 022 - 024 Opti chipset configuration registers 025 - 03F Unused 02E - 02F 87334 “Super I/O” configuration fo[...]

Specific at ions Maintenance and Serv ice Guide 6–13 I/O Address (he x) System Function (shipping configuration) 0A2 - 0BF Unused 0C0 - 0DF DMA controller no . 2 0E0 - 0EF Unused 0F0 - 0F1 Coprocessor b usy clear/reset 0F2 - 0FF Unused 100 - 16F Unused 170 - 177 Secondary fix ed disk controller 178 - 1EF Unused 1F0 - 1F7 Primar y fixed disk contr[...]

6–14 Maintenance and Servi ce Guide Spe cificat ions I/O Address (he x) System Function (shipping configuration) 2F0 - 2F7 Unused 2F8 - 2FF Infrared por t 300 - 31F Unused 320 - 36F Unused 370 - 377 Secondar y diskette driv e controller 378 - 37F P arallel por t (LPT1/default) 380 - 387 Unused 388 - 38B FM synthesizer—OPL3 38C - 3AF Unused 3B0 [...]

Specific at ions Maintenance and Serv ice Guide 6–15 Ta b l e 6 - 8 System Memory Map Size Memory Address System Function 640 KB 00000000-0009FFFF Base memor y 128 KB 000A0000-000BFFFF Video memor y 48 KB 000C0000-000CBFFF Video BIOS 160 KB 000C8000-000E7FFF Unused 64 KB 000E8000-000FFFFF System BIOS 15 MB 00100000-00FFFFFF Extended memor y 58 MB[...]

6–16 Maintenance and Servi ce Guide Spe cificat ions Ta b l e 6 - 9 System DMA Hard ware DMA System Function DMA0 Not applicab le DMA1* Not applicable DMA2* Not applicable DMA3 Not applicab le DMA4 Direct memory access controller DMA5* A vailab le for PC Card DMA6 Not assigned DMA7 Not assigned *PC Card controller ca n use DMA 1, 2, or 5.[...]

Maintenance and Serv ice Guide A–1 A Conn ec tor P in A ssi gnm ents Ta b l e A - 1 A udio-Out (Headphone) Pin Signal Pin Signal 1 A udio out, left channel 3 Ground 2 A udio out, right channel[...]

A–2 Maintenance and Servi ce Guide Connec tor P in Assignments Ta b l e A - 2 A udio-In (Microphone) Pin Signal Pin Signal 1 A udio signal in 3 Ground 2 A udio signal in Ta b l e A - 3 Universal Serial Bus Pin Signal Pin Signal 1 +5 VDC 3 Data + 2 Data – 4 Ground[...]

Connector P in Assignments Maintenance and Serv ice Guide A–3 Ta b l e A - 4 External Monitor Pin Signal Pin Signal 1 Red analog 9 +5 VDC 2 Green analog 10 Ground 3 Blue analog 11 Monitor detect 4 Not connected 12 DDC 2B data 5 Ground 13 Horizontal sync 6 Ground analog 14 V er tical sync 7 Ground analog 15 DDC 2B clock 8 Ground analog[...]

A–4 Maintenance and Servi ce Guide Connec tor P in Assignments Ta b l e A - 5 RJ-45 (Network) Pin Signal Pin Signal 1 T ransmit + 5 Unused 2 T ransmit – 6 Receiv e – 3 Receiv e + 7 Unused 4 Unused 8 Unused[...]

Connector P in Assignments Maintenance and Serv ice Guide A–5 Ta b l e A - 6 RJ-11 (Modem) Pin Signal Pin Signal 1 Unused 4 Unused 2T i p 5U n u s e d 3 Ring 6 Unused[...]

A–6 Maintenance and Servi ce Guide Connec tor P in Assignments Ta b l e A - 7 S-Video-Out Pin Signal Pin Signal 1 S-VHS color (C) signal 5 TV -CD 2 Composite video signal 6 S-VHS intensity ground 3 S-VHS intensity (Y) signal 7 Composite video g round 4 S-VHS color g round[...]

Maintenance and Serv ice Guide B–1 B P o w er Cord Set Req uirements 3-Con duc tor P o w er Cord Set The wide range input feature of the computer permits it to operate from any line v oltage from 100 to 120 or 220 to 240 volts A C. The po wer cord set included with the computer meets the requirements for use in the country where the equipment is [...]

B–2 Maintenance and Servi ce Guide P ow er Cord Set R equirements Gen eral Requirements The requirements listed belo w are applicable to all countries. ■ The length of the po wer cord set must be at least 1.5 m (5.0 ft) and a maximum of 2.0 m (6.5 ft). ■ All po wer cord sets must be approved b y an acceptable accredited agency responsible for[...]

P ow er Cord Set R equirements Maintenance and Serv ice Guide B–3 Countr y- Spec ifi c Requirements 3-Conductor P ower Cor d Set Requirements Country/Region Accredited Agency Applicable Note Number A ustralia EANSW 1 Au s t r i a OVE 1 Belgium CEBC 1 Canada CSA 2 Denmark DEMK O 1 Finland FIMK O 1 F rance UTE 1 Germany VDE 1 Italy IMQ 1 Jap a n ME[...]

B–4 Maintenance and Servi ce Guide P ow er Cord Set R equirements Ko r e a E K 4 The Netherlands KE A 1 Norwa y NEMK O 1 P eople’ s Republic of China CCC 5 Sweden SEMK O 1 Switzerland SEV 1 T aiwan BSMI 4 United Kingdom BSI 1 United States UL 2 ✎ NOTES: 1. The fle xible cord must be <HAR> T ype HO5VV -F , 3-conductor , 1.0 mm² conducto[...]

Maintenance and Serv ice Guide C–1 C Scre w List ing This appendix provides specif ication and reference information for the scre ws and screw locks used in the computer . All screws listed in this appendix are av ailable in the Computer Screw Kit, spare part number 407782-001, and the Display Scre w Kit, spare part number 407794-001. Phillips P [...]

C–2 Maintenance and Serv ice Guide Scr ew Listing Black Phillips P M2 .5×5 . 0 Scr e w Locati ons Ta b l e C - 2 Black Phillips PM2.5×5.0 Scre w Color Qty . Length Thread Head Width Black 4 5.0 mm 2.5 mm 6.0 mm Where used: 1 T wo scre ws that secure the hard driv e cov er to the computer (screw s are captured on the cov er by C clips; documente[...]

Sc rew Li s t i n g Maintenance and Serv ice Guide C–3 Phillips P M2 .5×6 . 0 Scr ew Locati ons Ta b l e C - 3 Phillips PM2.5×6.0 Screw Color Qty . Length Thread Head Width Black 15 6.0 mm 2.5 mm 6.0 mm Where used: 2 screws that secure the hard driv e to the computer (documented in Section 5.4 ) mm[...]

C–4 Maintenance and Serv ice Guide Scr ew Listing Phillips P M2 .5×6 . 0 Scr ew Locati ons Ta b l e C - 3 Phillips PM2.5×6.0 Screw (Continued) Color Qty . Length Thread Head Width Black 15 6.0 mm 2.5 mm 6.0 mm Where used: 3 screws that secure the s witch co v er to the computer (documented in Section 5.10 ) mm[...]

Sc rew Li s t i n g Maintenance and Serv ice Guide C–5 Phillips P M2 .5×6 . 0 Scr ew Locati on Ta b l e C - 3 Phillips PM2.5×6.0 Screw (Continued) Color Qty . Length Thread Head Width Black 15 6.0 mm 2.5 mm 6.0 mm Where used: One screw that secures the displa y hi nge suppor t to the base enclosure (documented in Section 5.17 ) mm[...]

C–6 Maintenance and Serv ice Guide Scr ew Listing Phillips P M2 .5×6 . 0 Scr ew Locati ons Ta b l e C - 3 Phillips PM2.5×6.0 Screw (Continued) Color Qty . Length Thread Head Width Black 15 6.0 mm 2.5 mm 6.0 mm Where used: 3 screws that secure the top co ve r to the computer (documented in Section 5.15 ) mm[...]

Sc rew Li s t i n g Maintenance and Serv ice Guide C–7 Phillips P M2 .5×6 . 0 Scr ew Locati on Ta b l e C - 3 Phillips PM2.5×6.0 Screw (Continued) Color Qty . Length Thread Head Width Black 15 6.0 mm 2.5 mm 6.0 mm Where used: 1 screw that secures the USB/audio boar d to the base enclosure (documented in Section 5.18 ) mm[...]

C–8 Maintenance and Serv ice Guide Scr ew Listing Phillips P M2 .5×6 . 0 Scr ew Locati ons Ta b l e C - 3 Phillips PM2.5×6.0 Screw (Continued) Color Qty . Length Thread Head Width Black 15 6.0 mm 2.5 mm 6.0 mm Where used: 4 screws that secure the heat sink to the system board (documented in Section 5.19 ) mm[...]

Sc rew Li s t i n g Maintenance and Serv ice Guide C–9 Phillips P M2 .5×6 . 0 Scr ew Locati on Ta b l e C - 3 Phillips PM2.5×6.0 Screw (Continued) Color Qty . Length Thread Head Width Black 15 6.0 mm 2.5 mm 6.0 mm Where used: One screw that secures the speak ers to the system board (documented in Section 5.22 ) mm[...]

C–10 Maintenance and Servi ce Guide Scr ew Listing Phillips P M2 .5×3 .0 Sc r ew L ocations Ta b l e C - 4 Phillips PM2.5×3.0 Screw Color Qty . Length Thread Head Width Black 5 3.0 mm 2.5 mm 6.0 mm Where used: 2 screws that secure the memory shie ld to the computer (documented in Section 5.6 ) mm[...]

Sc rew Li s t i n g Maintenance and Serv ice Guide C–11 Phillips P M2 .5×3 .0 Sc r ew L ocations Ta b l e C - 4 Phillips PM2.5×3.0 Screw (Continued) Color Qty . Length Thread Head Width Black 5 3.0 mm 2.5 mm 6.0 mm Where used: 2 screws that secure the top co ve r to the computer (documented in Section 5.15 ) mm[...]

C–12 Maintenance and Servi ce Guide Scr ew Listing Phillips P M2 .5×3 .0 Sc r ew L ocation Ta b l e C - 4 Phillips PM2.5×3.0 Screw (Continued) Color Qty . Length Thread Head Width Black 5 3.0 mm 2.5 mm 6.0 mm Where used: One screw that secures the f an assemb ly to the system board (documented in Section 5.21 ) mm[...]

Sc rew Li s t i n g Maintenance and Serv ice Guide C–13 Phillips P M2 .5×11. 0 Scr ew L ocations Ta b l e C - 5 Phillips PM2.5×11.0 Screw Color Qty . Length Thread Head Width Black 20 11.0 mm 2.5 mm 6.0 mm Where used: 1 One screw that secures the optical drive to the computer (documented in Section 5.9 ) 2 T wo scre ws that secure the switch co[...]

C–14 Maintenance and Servi ce Guide Scr ew Listing Phillips P M2 .5×11. 0 Scr ew L ocations Ta b l e C - 5 Phillips PM2.5×11.0 Screw (Continued) Color Qty . Length Thread Head Width Black 20 11.0 mm 2.5 mm 6.0 mm Where used: 8 screws that secure the top co ve r to the computer (documented in Section 5.15 ) mm[...]

Sc rew Li s t i n g Maintenance and Serv ice Guide C–15 Phillips P M2 .5×11. 0 Scr ew L ocations Ta b l e C - 5 Phillips PM2.5×11.0 Screw (Continued) Color Qty . Length Thread Head Width Black 20 11.0 mm 2.5 mm 6.0 mm Where used: 7 screws that secure the top co ve r to the computer (documented in Section 5.15 ) mm[...]

C–16 Maintenance and Servi ce Guide Scr ew Listing Phillips P M2 .5×11. 0 Scr ew L ocations Ta b l e C - 5 Phillips PM2.5×11.0 Screw (Continued) Color Qty . Length Thread Head Width Black 20 11.0 mm 2.5 mm 6.0 mm Where used: 2 screws that secure the system board to the base enclosure (documented in Section 5.17 ) mm[...]

Sc rew Li s t i n g Maintenance and Serv ice Guide C–17 Phillips P M2 . 0×4.0 S cr ew L ocations Ta b l e C - 6 Phillips PM2.0×4.0 Screw Color Qty . Length Thread Head Width Black 22 4.0 mm 2.0 mm 5.0 mm Where used: 2 screws that secure the optical driv e brac k et to the optical drive (documented in Section 5.9 ) mm[...]

C–18 Maintenance and Servi ce Guide Scr ew Listing Phillips P M2 . 0×4.0 S cr ew L ocations Ta b l e C - 6 Phillips PM2.0×4.0 Screw (Continued) Color Qty . Length Thread Head Width Black 22 4.0 mm 2.0 mm 5.0 mm Where used: 5 screws that secure the LED board to the k eyboard frame (documented in Section 5.14 ) mm[...]

Sc rew Li s t i n g Maintenance and Serv ice Guide C–19 Phillips P M2 . 0×4.0 S cr ew L ocations Ta b l e C - 6 Phillips PM2.0×4.0 Screw (Continued) Color Qty . Length Thread Head Width Black 22 4.0 mm 2.0 mm 5.0 mm Where used: 8 screws that secure the displa y hinges to the displa y panel (documented in Section 5.14 ) mm[...]

C–20 Maintenance and Servi ce Guide Scr ew Listing Phillips P M2 . 0×4.0 S cr ew L ocations Ta b l e C - 6 Phillips PM2.0×4.0 Screw (Continued) Color Qty . Length Thread Head Width Black 22 4.0 mm 2.0 mm 5.0 mm Where used: 2 screws that secure the wireless tr ansceivers to the displa y enclosure (documented in Section 5.14 ) mm[...]

Sc rew Li s t i n g Maintenance and Serv ice Guide C–21 Phillips P M2 . 0×4.0 S cr ew L ocation Ta b l e C - 6 Phillips PM2.0×4.0 Screw (Continued) Color Qty . Length Thread Head Width Black 22 4.0 mm 2.0 mm 5.0 mm Where used: One screw that secures the Bluetooth module to the displa y hinge suppor t (documented in Section 5.16 ) mm[...]

C–2 2 Maintenance and Servi ce Guide Scr ew Listing Phillips P M2 . 0×4.0 S cr ew L ocations Ta b l e C - 6 Phillips PM2.0×4.0 Screw (Continued) Color Qty . Length Thread Head Width Black 22 4.0 mm 2.0 mm 5.0 mm Where used: 1 T wo scre ws that secure the PC Ca rd assembly to the system board (documented in Section 5.23 ) 2 T wo scre ws that sec[...]

Sc rew Li s t i n g Maintenance and Serv ice Guide C–2 3 Silv er Phillips P M 2 .5×5 .0 Sc re w Locati ons Ta b l e C - 7 Silver Phillips PM2.5×5.0 Screw Color Qty . Length Thread Head Width Silver 6 5.0 mm 2.5 mm 5.0 mm Where used: 2 screws that secure the s witch co v er to the computer (documented in Section 5.10 ) mm[...]

C–2 4 Maintenance and S ervice Guide Scr ew Listing Silv er Phillips P M 2 .5×5 . 0 Scr ew Locati on Ta b l e C - 7 Silver Phillips PM2.5×5.0 Screw (Continued) Color Qty . Length Thread Head Width Silver 6 5.0 mm 2.5 mm 5.0 mm Where used: One screw that secures the top co ve r to the computer (documented in Section 5.15 ) mm[...]

Sc rew Li s t i n g Maintenance and Serv ice Guide C–2 5 Silv er Phillips P M 2 .5×5 .0 Sc re w Locati ons Ta b l e C - 7 Silver Phillips PM2.5×5.0 Screw (Continued) Color Qty . Length Thread Head Width Silver 6 5.0 mm 2.5 mm 5.0 mm Where used: 3 screws that secure the top co ve r to the computer (documented in Section 5.15 ) mm[...]

C–2 6 Maintenance and S ervice Guide Scr ew Listing Phillips P M 2 .0×6 .0 S cr ew L ocation Ta b l e C - 8 Phillips PM2.0×6.0 Screw Color Qty . Length Thread Head Width Silver 1 6.0 mm 2.0 mm 5.0 mm Where used: One screw that secures the k eyboard frame to the computer (documented in Section 5.11 ) mm[...]

Sc rew Li s t i n g Maintenance and Serv ice Guide C–2 7 Phillips P M2 . 0×3. 0 Sc re w Locati ons Ta b l e C - 9 Phillips PM2.0×3.0 Screw Color Qty . Length Thread Head Width Silver 4 3.0 mm 2.0 mm 5.0 mm Where used: 4 screws that secure the k eyboard to the k eyboard frame (documented in Section 5.13 ) mm[...]

C–2 8 Maintenance and Servi ce Guide Scr ew Listing Phillips P M2 . 5×7 . 0 Scr e w Locati ons T able C-10 Phillips PM2.5×7.0 Screw Color Qty . Length Thread Head Width Silver 14 7.0 mm 2.5 mm 5.0 mm Where used: 4 screws that secure the displa y asse mbly to the computer (documented in Section 5.14 ) mm[...]

Sc rew Li s t i n g Maintenance and Serv ice Guide C–2 9 Phillips P M2 . 5×7 . 0 Scr e w Locati ons T able C-10 Phillips PM2.5×7.0 Screw (Continued) Color Qty . Length Thread Head Width Silver 14 7.0 mm 2.5 mm 5.0 mm Where used: 8 screws that secure the displa y bezel to the displa y enclosu re (documented in Section 5.14 ) mm[...]

C–30 Maintenance and Servi ce Guide Scr ew Listing Phillips P M2 . 5×7 . 0 Scr e w Locati ons T able C-10 Phillips PM2.5×7.0 Screw (Continued) Color Qty . Length Thread Head Width Silver 14 7.0 mm 2.5 mm 5.0 mm Where used: 2 screws that secure the displa y panel to the displa y enclosure (documented in Section 5.14 ) mm[...]

Sc rew Li s t i n g Maintenance and Serv ice Guide C–31 Slotted SM1.5×9 .0 Sc re w Locations T able C-11 Slotted SM1.5×9.0 Screw Color Qty . Length Thread Head Width Silver 2 9.0 mm 1.5 mm 2.0 mm Where used: 2 screws that secure the e xpansion por t 2 brack et and f an assembly to the system board (documented in Section 5.21 ) mm[...]

C–3 2 Maintenance and Servi ce Guide Scr ew Listing Phillips P M3. 0×6. 0 Scr ew L ocations T able C-12 Phillips PM3.0×6.0 Screw Color Qty . Length Thread Head Width Black 2 6.0 mm 3.0 mm 5.0 mm Where used: 2 screws that secure the f an assembly to the system board (documented in Section 5.21 ) mm[...]

Maintenance and Serv ice Guide D–1 D Disp l ay Compon ent Recy c ling Å W ARNIN G: The bac klight contains mer cury . Caution should be ex er c ised when r emov ing and handling the backlight t o avo id damaging this component and cau sing exposur e to the mer cury . Ä CAUT ION: The pr ocedures in this appe ndix can r esult in damage to display[...]

D–2 Maintenance and Servi ce Guide Display C omponent Recy cling This appendix provides disassembl y instructions for the display assembly . The display assembly must be disassembled to gain access to the backlight 1 and the LCD panel 2 . ✎ Disassembly procedures dif fer from one display assembly to another . The procedures provided in this app[...]

Display C omponent R ecyc ling Maintenance and Serv ice Guide D–3 Perform the follo wing steps to disassemble the display assembly: 1. Remov e all screw co vers 1 and scre ws 2 that secure the display bezel to the display assembly . Remo v ing the Display Bez el Scr e w Cov ers and S cr ew s[...]

D–4 Maintenance and Servi ce Guide Display C omponent Recy cling 2. Lift up and out on the left and right inside edges 1 and the top and bottom inside edges 2 of the display bezel until the bezel disengages fro m the display assembly . 3. Remov e the display bezel 3 . Remo ving the Display Bez el[...]

Display C omponent R ecyc ling Maintenance and Serv ice Guide D–5 4. Disconnect all LCD panel cables 1 from the display in verter board and remov e the in verter board 2 . Remo v ing the Display In ve r ter Boar d[...]

D–6 Maintenance and Servi ce Guide Display C omponent Recy cling 5. Remov e all screws 1 that secure the LCD panel to the display enclosure. 6. Remov e the LCD panel 2 from the display enclosure. Re mov ing the L CD P anel[...]

Display C omponent R ecyc ling Maintenance and Serv ice Guide D–7 7. T urn the LCD panel upside down. 8. Remov e all screws that secure the LCD panel frame to the LCD panel. Re mov ing the L CD P anel F r ame Scr e ws[...]

D–8 Maintenance and Servi ce Guide Display C omponent Recy cling 9. Use a sharp-edged tool to cut the tape 1 that secures the side of the LCD panel to the LCD panel frame. 10. Remov e the LCD panel frame 2 from the display panel. Re mov ing the L CD P anel F r ame[...]

Display C omponent R ecyc ling Maintenance and Serv ice Guide D–9 11. Remov e the screws 1 that secure the backlight co ver to the LCD panel. 12. Lift the top edge of the backlight cov er 2 and swing it forward. 13. Remov e the backlight cove r . Re mov ing the Backligh t Co ver[...]

D–10 Maintenance and Serv ice Guide Display C omponent Recy cling 14. T urn the LCD panel right-side up. 15. Remov e the backlight cables 1 from the clip 2 in the LCD panel. Re leasing the Backli ght Cables[...]

Display C omponent R ecyc ling Maintenance and Serv ice Guide D–11 16. T urn the LCD panel upside down. 17. Remov e the backlight frame from the LCD panel. Re mov ing the Backligh t Fr ame[...]

D–12 Maintenance and Serv ice Guide Display C omponent Recy cling Å W ARNIN G: The bac klight contains mer cury . Caution should be ex er c ised when r emov ing and handling the backlight t o avo id damaging this component and cau sing exposur e to the mer cury . 18. Slide the backlight out of the backlight frame. Re mov ing the Backligh t[...]

Display C omponent R ecyc ling Maintenance and Serv ice Guide D–13 19. Disconnect the display cable 1 from the LCD panel. 20. Remov e the screws 2 that secure the LCD panel to the LCD rear panel. 21. Release the LCD panel 3 from the LCD rear panel. 22. Release the tape 4 that secures the LCD panel to the LCD rear panel. Re leasing the L CD P anel[...]

D–14 Maintenance and Serv ice Guide Display C omponent Recy cling 23. Remov e the LCD panel. Re mov ing the L CD P anel 24. Recycle the backlight and LCD panel.[...]

Maintenance and Serv ice Guide Index–1 Ind e x 1394 port 1–11 A all-in-one media cable, spare part number 3–16 , 3–18 arrow keys 1–13 audio troubleshooting 2–23 audio Y-cable 2, spare part number 3–16 , 3–18 audio-in jack location 1–8 pin assignments A–2 audio-out jack location 1–8 pin assignments A–1 B base enclosure, spare[...]

Index–2 Maintenance and S ervice Guide Index left-side 1–9 , 1–10 right-side 1–8 top 1–14 , 1–16 computer feet illustrated 3–12 locations 5–10 Computer Setup Advanced Menu 2–6 File Menu 2–3 overview 2–1 Security Menu 2–4 Tools Menu 2–5 Computer Setup defaults 2–2 computer specifications 6–1 connector pin assignments au[...]

Index Maintenance and Serv ice Guide Index–3 spare part number 3–5 , 3–15 , 3–21 , 5–17 specifications 6–6 DVD±RW and CD-RW Double Layer Combo Drive OS loading problems 2–22 precautions 4–3 spare part number 3–5 , 3–15 , 3–21 , 5–17 specifications 6–8 DVD±RW and CD-RW Double Layer Combo Drive with LightScribe OS loading [...]

Index–4 Maintenance and S ervice Guide Index G grounding equipment and methods 4–6 H hard drive OS loading problems 2–18 precautions 4–3 removal 5–6 spare part numbers 3–9 , 3–15 , 3–21 , 3–22 , 5–6 specifications 6–4 hard drive bay 1–19 hard drive cover illustrated 3–12 removal 5–7 headphone jack, pin assignments A–1 [...]

Index Maintenance and Serv ice Guide Index–5 memory/Mini PCI module compartment cover illustrated 3–12 location 1–19 removal 5–11 microphone jack, pin assignments A–2 Mini PCI communications module removal 5–14 spare part numbers 3–9 , 3–18 , 5–14 modem connector and cable illustrated 3–13 removal 5–57 modem jack location 1–[...]

Index–6 Maintenance and S ervice Guide Index power supply, spare part number 3–16 , 3–19 power, troubleshooting 2–10 precautions DVD/CD-RW Combo Drive 4–3 DVD±RW and CD-RW Double Layer Combo Drive 4–3 DVD±RW and CD-RW Double Layer Combo Drive with LightScribe 4–3 hard drive 4–3 optical drive 4–3 processor removal 5–63 spare pa[...]

Index Maintenance and Serv ice Guide Index–7 I/O addresses 6–12 interrupts 6–10 memory map 6–15 optical drive 6–6 system DMA 6–16 static shielding materials 4–8 S-Video-out jack location 1–10 pin assignments A–6 switch cover removal 5–19 spare part numbers 3–3 , 3–20 , 5–19 system board removal 5–50 spare part numbers 3?[...]

Index–8 Maintenance and S ervice Guide Index V vent, locations 1–9 , 1–19 video troubleshooting 2–14 volume buttons 1–15 W Windows applications key 1–13 Windows logo key 1–13 wireless antenna removal 5–39 spare part number 3–11 , 3–19 , 5–32 wireless button 1–15 wireless light 1–9 , 1–15 workstation precautions 4–6[...]