Vai alla pagina of
Manuali d’uso simili
-
Network Card
HP (Hewlett-Packard) NC380T
25 pagine 0.69 mb -
Network Card
HP (Hewlett-Packard) 1100d
102 pagine 5.15 mb -
Network Card
HP (Hewlett-Packard) FC1142
4 pagine 0.12 mb -
Network Card
HP (Hewlett-Packard) DL380
45 pagine 1.04 mb -
Network Card
HP (Hewlett-Packard) XP24000
42 pagine 1.14 mb -
Network Card
HP (Hewlett-Packard) HP700196
31 pagine 1.42 mb -
Network Card
HP (Hewlett-Packard) A5799A
166 pagine 1.51 mb -
Network Card
HP (Hewlett-Packard) FC2242
4 pagine 0.12 mb
Un buon manuale d’uso
Le regole impongono al rivenditore l'obbligo di fornire all'acquirente, insieme alle merci, il manuale d’uso HP (Hewlett-Packard) 4250. La mancanza del manuale d’uso o le informazioni errate fornite al consumatore sono la base di una denuncia in caso di inosservanza del dispositivo con il contratto. Secondo la legge, l’inclusione del manuale d’uso in una forma diversa da quella cartacea è permessa, che viene spesso utilizzato recentemente, includendo una forma grafica o elettronica HP (Hewlett-Packard) 4250 o video didattici per gli utenti. La condizione è il suo carattere leggibile e comprensibile.
Che cosa è il manuale d’uso?
La parola deriva dal latino "instructio", cioè organizzare. Così, il manuale d’uso HP (Hewlett-Packard) 4250 descrive le fasi del procedimento. Lo scopo del manuale d’uso è istruire, facilitare lo avviamento, l'uso di attrezzature o l’esecuzione di determinate azioni. Il manuale è una raccolta di informazioni sull'oggetto/servizio, un suggerimento.
Purtroppo, pochi utenti prendono il tempo di leggere il manuale d’uso, e un buono manuale non solo permette di conoscere una serie di funzionalità aggiuntive del dispositivo acquistato, ma anche evitare la maggioranza dei guasti.
Quindi cosa dovrebbe contenere il manuale perfetto?
Innanzitutto, il manuale d’uso HP (Hewlett-Packard) 4250 dovrebbe contenere:
- informazioni sui dati tecnici del dispositivo HP (Hewlett-Packard) 4250
- nome del fabbricante e anno di fabbricazione HP (Hewlett-Packard) 4250
- istruzioni per l'uso, la regolazione e la manutenzione delle attrezzature HP (Hewlett-Packard) 4250
- segnaletica di sicurezza e certificati che confermano la conformità con le norme pertinenti
Perché non leggiamo i manuali d’uso?
Generalmente questo è dovuto alla mancanza di tempo e certezza per quanto riguarda la funzionalità specifica delle attrezzature acquistate. Purtroppo, la connessione e l’avvio HP (Hewlett-Packard) 4250 non sono sufficienti. Questo manuale contiene una serie di linee guida per funzionalità specifiche, la sicurezza, metodi di manutenzione (anche i mezzi che dovrebbero essere usati), eventuali difetti HP (Hewlett-Packard) 4250 e modi per risolvere i problemi più comuni durante l'uso. Infine, il manuale contiene le coordinate del servizio HP (Hewlett-Packard) in assenza dell'efficacia delle soluzioni proposte. Attualmente, i manuali d’uso sotto forma di animazioni interessanti e video didattici che sono migliori che la brochure suscitano un interesse considerevole. Questo tipo di manuale permette all'utente di visualizzare tutto il video didattico senza saltare le specifiche e complicate descrizioni tecniche HP (Hewlett-Packard) 4250, come nel caso della versione cartacea.
Perché leggere il manuale d’uso?
Prima di tutto, contiene la risposta sulla struttura, le possibilità del dispositivo HP (Hewlett-Packard) 4250, l'uso di vari accessori ed una serie di informazioni per sfruttare totalmente tutte le caratteristiche e servizi.
Dopo l'acquisto di successo di attrezzature/dispositivo, prendere un momento per familiarizzare con tutte le parti del manuale d'uso HP (Hewlett-Packard) 4250. Attualmente, sono preparati con cura e tradotti per essere comprensibili non solo per gli utenti, ma per svolgere la loro funzione di base di informazioni e di aiuto.
Sommario del manuale d’uso
-
Pagina 1
HP Print Server Appliance 4250 User's Guide Click a title to view a topic. Home General Information Product Overview Product Specifications Setting the Date and Time Initial Set Up Getting Started Installing Printers on Clients Front Panel Hardware Installation Web Interface Networking TCP/IP and DNS Settings Microsoft Network Settings LPD Pri[...]
-
Pagina 2
HP Print Server Appliance Documentation for Firmware Version 2.5.x © 1999-2004 Hewlett-Packard Company[...]
-
Pagina 3
Product Overview Links within this page: Product Introduction Operation and Management Product Description Compatibility with HP Print Servers Compatibility with Other (Non-HP) Print Servers Product Updates Links to related pages: Technical Specifications Product Introduction Figure 1: The HP Print Server PSA 4250 The HP Print Server Appliance 4250[...]
-
Pagina 4
administrators to easily authorize or restrict print administration and services to specific groups or users by using their existing user name and password of the NT 4.0 domain. An NT domain is a logical grouping of network servers and other computers that share a common security and user account for each user. Users log on to the domain, not to in[...]
-
Pagina 5
● Microsoft Windows NT ● Microsoft Windows ME ● Microsoft Windows XP ● UNIX Following are some main features of the PSA: ● Off-loads spooling from a UNIX or Windows NT server ● Easy installation ● Easy management ❍ Centralized management using Web Jetadmin ❍ Can be managed from any supported web browser on the network ❍ Virtuall[...]
-
Pagina 6
This feature is enabled by default and can be disabled by unchecking this box. Each time an image is retrieved, it is logged like any other visit to HP's website. In addition, each request includes the serial number of the requesting unit. HP uses this to provide support information relative to the specific unit. No personally identifiable inf[...]
-
Pagina 7
Product Specifications Links within this page: Model Number System Requirements Language Options and Power Cord Requirements Supported Clients Supported Printers Supported Web Browsers What Ships in the Box Security Features Physical Specifications Electrical Specifications Environmental Specifications Safety Certifications Figure 1: The HP Print S[...]
-
Pagina 8
System Requirements The computer printing to the PSA must be running TCP/IP and have Microsoft Windows 95, 98, NT, 2000, ME, XP, or other operating systems running LPD. Language Options and Power Cord Requirements The following localization options are available for the power cord. The power cord must be be a standard IEC-320 female power cord, ter[...]
-
Pagina 9
Australia New Zealand ABG 8120-6810 Hong Kong SAR AB5 8120-0550 Supported Clients Clients are networked PCs that submit print jobs to the PSA. The PSA can accept print jobs from the following clients: ● Windows 95 ● Windows 98 ● Windows NT 4.0 ● Windows 2000 ● Windows ME ● Windows XP ● Any RFC 1179-compliant LPD client including (not [...]
-
Pagina 10
The PSA has a front panel password to prevent unauthorized front panel configuration. It also has a web administrator name and password, which are required to configure the device or manage printers (the default user name is admin and the default password is admin). Additional web administrator accounts can be added. The existing user account infor[...]
-
Pagina 11
Minimum Spooling Capacity 7 Gigabytes Electrical Specifications Attribute Specification Power requirements 120/240 VAC at 50/60 Hz Power consumption 100-127 V ~ 1000mA 200-240 V ~ 750mA Power connection IEC-320 Environmental Specifications Attribute Specification Relative humidity 80 percent at 40 degrees C (104 degrees F) Temperature (Operating) +[...]
-
Pagina 12
Web Interface for the PSA Links within this page: Supported Web Browsers Accessing the Web Interface Menu Overview Page Changing the Date and Time The PSA contains a web server. The web server allows administrators to manage the configuration of the PSA, review the status of the device, and view print jobs from your web browser. This page explains [...]
-
Pagina 13
Menu The menu is always displayed on the left side of the displayed page in the web interface. Click on any of the following topics listed on the menu for more information: Print Services Overview Print Shares Driver Management Networking Date and Time TCP/IP and DNS Microsoft Network LPD Settings SNMP Security Administrators SSL Certificate Mainte[...]
-
Pagina 14
Print Server Name Name as typed in the Print Server Appliance Name field on the Microsoft Network Settings page (in the web interface under Networking ). Appliance Status Status of this PSA. If a backup, restore, or upgrade is in process, shows the current state of that operation. System Load Shows how heavily the PSA has been used in the past 15 m[...]
-
Pagina 15
Changing the Date and Time Use the Date and Time Settings page to set the date and time of the PSA. Field Name Description Day Type the day of the month numerically (for example: "01" or "20"). Month Type the month (for example: "01", "02", and so on). Year Type the four-digit year (for example, "2003&qu[...]
-
Pagina 16
Links to related pages: System Messages for Date and Time[...]
-
Pagina 17
Getting Started Links within this document: What Ships in the Box Steps for Installation and Configuration Hardware Installation Links to related documents: Troubleshooting the Appliance What Ships in the Box The following items ship with PSA. If something is missing from the box, please contact the HP Dealer or Reseller where the PSA was purchased[...]
-
Pagina 18
2. Attach its rubber feet for desktop, rack shelf, or under-printer installation. For rackmount installation, click here . 3. Connect the cables and components . 4. Configure the IP settings using the front panel (for the first time). The IP address can be changed through the web interface if desired. 5. Access the web interface. 6. Complete the TC[...]
-
Pagina 19
Installing Printers on Clients Links within this document: Installing Printers on Microsoft Clients (the Microsoft Point and Print feature) Bypassing Point and Print Configuring Printing for UNIX Clients Links to related documents: Troubleshooting the Appliance Installing printers on each client computer is required in order for clients to be able [...]
-
Pagina 20
1. On the client workstation, click Start-->Settings-->Printers . 2. Double-click the Add Printer icon. 3. Select the Network print server radio button. 4. Select the PSA and printer from the list box. Or, type the Universal Naming Convention (UNC) path (for example: "spooler1printer1"). See Microsoft documentation for more infor[...]
-
Pagina 21
<psa_name><printer_name> (where "psa_name" is the name of the PSA and "printer_name" is the name of the printer) 6. On the screen showing printer manufacturers and printers, select a printer driver and then click Next . 7. On the Name Your Printer screen, specify a printer name and then click Next . 8. On the Prin[...]
-
Pagina 22
command line for printing. Following is an example of configuring print queues for BSD-like systems (for example, Linux): 1. Edit the /etc/printcap file to include the following entries: printer_name: :lp=: :rm= print_appliance_name: :rp= remote_printername_argument : (this should be the same as the printer name on the appliance) :lf=/var/spoo[...]
-
Pagina 23
1. At the UNIX prompt type: lp -d printername file_name or on a BSD-like system: lpr -P printername file_name where printername is the name of the printer as added to the appliance, and file_name is the file to be printed. 2. To get print queue status, type the following at the prompt: lpstat printername or on a BSD-like system: lpq -P printername [...]
-
Pagina 24
Front Panel Links to related pages: Troubleshooting the PSA The following activities can be performed from the front panel: Start Up or Shut Down the PSA Configure the IP Address for the PSA Configure the Link Speed and Duplex Mode for the PSA Set or Change the Front Panel Password The front panel on the HP Print Server Appliance 4250 has the follo[...]
-
Pagina 25
Power LED ON when power is supplied to the PSA and it is turned on . Network Activity LED LIT when there is a connection between the PSA and other network devices. BLINKS when there is network activity between the PSA and other network devices. Disk Activity LED ON when there is disk activity on the PSA. Alert LED OFF during normal operations (ON d[...]
-
Pagina 26
Cancel changes or end an operation. Direction Buttons Up. Press this button to return to the previous menu item or step of a procedure. If Enter hasn't been pressed, changes will not be applied. Down. Press this button to advance to the next menu item or step of a procedure. Left. When there is a choice of options (as indicated in the front pa[...]
-
Pagina 27
Microsoft Network Settings page ). If the name is not typed in the web interface, the default name, based on the device's MAC address, is displayed. The second line of the display shows date, time, IP address, and firmware version in a repeating sequence. Starting Front Panel Operation Configure the IP Address for the PSA Configure the Link Sp[...]
-
Pagina 28
If Manual : Use the number buttons on the front panel of the PSA to enter the IP address. Then press . If DHCP : Press to continue. If Manual : Use the number buttons on the front panel of the PSA to enter the subnet mask. Press . If DHCP : Press to continue. If Manual : Use the numbers on the front panel of the PSA to enter the default gateway. Pr[...]
-
Pagina 29
To begin configuring the link speed and duplex mode for the PSA, press once. Press to skip the IP configuration and to go to the Link Speed and Duplex Mode configuration. Press . Select the link mode by pressing or to toggle between Manual and Auto Detect . Press to being configuring the link speed. If Manual mode: Press or to select the link speed[...]
-
Pagina 30
There are two types of passwords that can be set for the PSA: a front panel password (one per PSA) and an administrator password (can be multiple accounts, but there must be at least one), which enables access to the web interface to manage the PSA. The front panel password is discussed in this section. There is no front panel password until it is [...]
-
Pagina 31
Hardware Installation Links within this document: Desktop/Rack Shelf/Under-Printer Installation Rackmount Installation Cable Connections Troubleshooting the Appliance Links to related documents: Troubleshooting the Appliance This document explains how to connect the components of the appliance. When installing the hardware for the appliance, be cer[...]
-
Pagina 32
Note: The rackmount installation should be performed by an experienced individual, using appropriate tools, and exercising appropriate safety precautions. Use the following procedure to perform the rackmount installation: 1. Attach the rackmount brackets to the sides of the appliance. 2. Position the appliance in the rack. 3. Install the appliance [...]
-
Pagina 33
6. Turn on the appliance by pressing the Power button on the front panel. For initial installation, the IP address for the appliance can now be configured. Refer back to the Getting Started procedures , or refer directly to information about configuring IP addresses .[...]
-
Pagina 34
TCP/IP and DNS Settings Links within this page: TCP/IP and DNS Settings Configuring the PSA Using the Web Interface Links to related pages: Related System Messages Troubleshooting the PSA TCP/IP and DNS Settings The TCP/IP and DNS Settings page is accessible under Networking on the menu in the web interface. On this page, administrators can configu[...]
-
Pagina 35
screen to change Field Name Description Obtain an IP address automatically using DHCP Select this option for the PSA to be automatically configured using Dynamic Host Configuration Protocol (DHCP). Ensure that a valid DHCP server and address leases are available. If DHCP was chosen, the IP address, subnet mask, and default gateway will be automatic[...]
-
Pagina 36
Default Gateway Enter the IP address of the default gateway used to access other networks or subnets. This enables the PSA to communicate with devices (such as printers and PCs) on different subnets. If a gateway is not available, or if the address of the gateway is unknown, enter the same IP address used for the PSA, or leave this field blank (or [...]
-
Pagina 37
Microsoft Network Settings Links within this page: Microsoft Network Settings Page Microsoft Domain Authentication Features Adding the PSA to a Domain Enabling and Disabling Microsoft Domain Authentication Granting Printer Access or Authority to Users and Groups Administrator Accounts for the Appliance Links to related pages: Troubleshooting the Ap[...]
-
Pagina 38
Print Server Appliance Name Type a name for the PSA. The PSA name will be displayed: ● In the Network Neighborhood and in My Network Places on each client workstation. Both are visible from Microsoft Windows Explorer. ● On the Overview page in the web interface for the PSA. ● On the front panel of the PSA. If the network uses DNS to identify [...]
-
Pagina 39
Specified Domain Controllers List of specified domain controllers to use for user name and password validation. The PSA will try to communicate with the first domain controller in the list. If the PSA cannot communicate with the first one, it will then try the second domain controller in the list, and so forth. If none of the domain controllers in [...]
-
Pagina 40
To complete the Microsoft Network Settings page, follow these steps: 1. At a workstation, access the web browser and type the IP address for the PSA. 2. Log on to the PSA as an administrator . (The default user name is "admin" and the default password is "admin".) 3. Under Networking on the menu, select Microsoft Network . (See [...]
-
Pagina 41
A domain is a logical grouping of network servers and other computers that share a common security and user account for each user. Users log on to the domain, not to individual servers in the domain. Microsoft domain security is a feature that allows administrators to easily authorize or restrict print administration and services to specific groups[...]
-
Pagina 42
With Domain authentication disabled, local administrator accounts must be used to manage the PSA and access the web interface because all domain administrator accounts will be disabled by this action as well. Granting Printer Access or Authority to Users and Groups On Security page for a specific print share, assign domain users and/or groups appro[...]
-
Pagina 43
LPD Links within this page: LPD Printing Configuring LPD Printing Links to related pages: System Messages for LPD Printing Troubleshooting the PSA Configuring Printing for UNIX Clients This feature enables the Line Printer Daemon (LPD) protocol (sometimes referred to as "BSD compatible" network printing) to spool and control print jobs on[...]
-
Pagina 44
On the LPD Settings page, the administrator can enable or disable LPD printing. LPD Settings Page Field Name Description Disable LPD printing Disables LPD printing and print job management from any and all hosts. Enable LPD printing from ALL hosts Enables LPD printing and print job management from any and all hosts (default). Enable LPD printing fr[...]
-
Pagina 45
Configuring LPD Printing To enable or disable LPD printing, follow these steps: 1. In the web interface, click LPD Printing (on the menu under Networking ). 2. Complete the fields as described above.[...]
-
Pagina 46
SNMP Settings Links within this page: SNMP and the PSA SNMP Traps SNMPv3 Configuring SNMP Settings Links to related pages: Related System Messages Troubleshooting the PSA SNMP and the PSA The SNMP agent supports MIB II (Management Information Base II), Host Resources MIB (portions), its own MIB, called the HP-PRINT-SPOOLER-APPLIANCE-MIB, SNMPv3 , a[...]
-
Pagina 47
SNMP Settings Page Field Name Description Enable SNMPv3 Select this to enable SNMPv3. User account information will be saved and restored during a firmware upgrade . User Name User name must be between 2 and 32 characters long. Authentication Key Must be 32 characters long. Can be numbers 0-9 or characters a-f or A-F. Privacy Key Can be numbers 0-9[...]
-
Pagina 48
1. At a workstation, access the web browser and type the IP address for the PSA. 2. Log on to the PSA as an administrator . (The default user name is "admin" and the default password is "admin".) 3. Under Networking on the menu, select SNMP . (See the description of the fields above for more information.) 4. In IP Address , type[...]
-
Pagina 49
#3: logCriticalCategory administrative(3) #4: logCriticalID 110 #5: logCriticalMessageNumeric NULL #6: logCriticalMessageString Critically high disk utilization - disk utilization is at 90-100% of capacity. SNMPv3 The SNMPv3 RFCs do not specify a mechanism for creating the initial SNMPv3 account. The initial account creation is left to the develope[...]
-
Pagina 50
Initial Account Creation Through the PSA's Web Interface Using the PSA's web interface, users can create an SNMPv3 account by supplying a user name, an authentication key, and a privacy key. The PSA will except either a localized or non-localized key, but not a password. This was done by design to maintain backward compatibility with othe[...]
-
Pagina 51
1. Start the application KeyChange.exe that is supplied on the CD shipped with the PSA. 2. Create the Authentication Key: a. In New Passphrase , type the password. Use the engine ID you wish to communicate with (on the SNMP Settings page in the web interface under Networking ). Do not include the beginning "0x" which indicates the value i[...]
-
Pagina 52
Print Shares Links within this page: Print Shares Option Adding a Print Share Deleting a Print Share Viewing and Managing Print Jobs Print Share Properties Print Share Security Printer Drivers Printer Driver Management Adding New Drivers to the PSA Security Warning When Adding New Drivers Links to related pages: Installing Printers on Clients Relat[...]
-
Pagina 53
Field Names Description Share Name Name of the print share as typed in the Print Share Name field on the Add Print Share page in the web interface. This name is displayed in Network Neighborhood or in My Network Places as an available print share configured on the PSA. The print share name can be up to 79 characters long, including alphanumeric cha[...]
-
Pagina 54
Delete (Print Share) To delete a print share from the PSA, follow these steps: 1. Find the print share to delete from the PSA and click on that same line. 2. The message, "Are you sure you want to delete the print share and all of its print jobs?" is displayed. 3. Click . The selected print share and all of its print jobs will be deleted.[...]
-
Pagina 55
Note: When upgrading to 2.5.x, drivers that were installed prior to the upgrade will be available. HP Business Inkjet Printers HP Business Inkjet 2280 series printers HP Business Inkjet 3000 series printers HP Color LaserJet Printers HP Color LaserJet 2500 series printers HP Color LaserJet 5500 series printers HP Color LaserJet 4500 series printers[...]
-
Pagina 56
While there is no fixed limit on the number of printers that can be attached to the PSA, many factors impact performance in your environment and create an effective limit for your environment and use model. Factors that impact performance include the number of users printing through the PSA, how frequently the users print, whether NT Domain securit[...]
-
Pagina 57
of "LP" (and not "lp") while other manufacturer of print servers or systems administrators may choose different names. ) ❍ Add Print Share (Step 2 of 3) : Type the print share name and description. Add Print Share (Step 2 of 3) Page Field Names Description Print Share Name The print share name is displayed in Network Neighborh[...]
-
Pagina 58
Hide this print share in Network Neighborhood and My Network Places Select this option to hide this print share's name in Network Neighborhood or in My Network Places for clients. (This does not prevent the print share from being used, just from being displayed in Network Neighborhood or in My Network Places.) Print a banner page with each pri[...]
-
Pagina 59
Client Side Rendering Do not select this option unless you are having problems with your W2K drivers working properly. Symptoms include trouble with: ■ N-up (printing multiple pages in a reduced format on one page) ■ booklet style (format the print job into a printed booklet) ■ watermark (print a watermark on each page of the document) ■ Zo[...]
-
Pagina 60
. A security warning is displayed. Click Yes to continue and then follow the steps to add the printer driver and associate it with the print share just added. Note: After the PSA has been configured and drivers have been associated with print shares, the configuration should be backed up . Note: Having Windows 2000/XP versions and NT versions of dr[...]
-
Pagina 61
To manage print jobs for a print share, follow these steps: 1. Select Print Shares (in the web interface under Print Services ). The Print Share List page is displayed. 2. Find the appropriate print share and click in the Jobs column for that print share. The Print Jobs page is displayed. 3. To delete a print job, click on the line for the print jo[...]
-
Pagina 62
Print Share Description (optional) Description of the print share. Hide this print share in Network Neighborhood or My Network Places Select this to hide this print share's name in Network Neighborhood or in My Network Places for clients. (This does not prevent the print share from being used, just from being displayed in Network Neighborhood [...]
-
Pagina 63
To make any changes to this page, follow these steps. 1. Select Print Share (in the web interface under Print Services ). 2. Click for the print share. 3. If desired, make any changes to the print share's properties. 4. If desired, click to print a test page. 5. Click . The Print Share List page is displayed again. Printer Driver Page The Driv[...]
-
Pagina 64
Client Printer Driver Displays all printer drivers added to the PSA, and highlights the driver currently associated with the specified print share. To change the driver for the print share, highlight a different driver and click . Client Side Rendering Do not select this option unless you are having problems with your W2K drivers working properly. [...]
-
Pagina 65
Print Share Security Page Field Name Description Type account name Type the account name in the format DomainAccountname . Select accounts from This drop-down list contains names of the primary domain and all trusted domains. Select one from which to select accounts. Domain Members Shows all of the NT groups on the domain specified in the above fi[...]
-
Pagina 66
Printer Driver Management Links within this page: Driver Name Mismatch Security Warning When Adding New Drivers Links to related pages: System Messages for Driver Management Printer drivers are factory-installed , or they might already be loaded from a previously-added printer. All printer drivers added to the PSA are displayed on the Driver Manage[...]
-
Pagina 67
● Windows NT drivers show up as Windows NT drivers. ● Windows XP drivers show up as Windows NT or Windows 2000 drivers. Note: Having Windows 2000/XP versions and NT versions of drivers with the same names installed on a PSA can result in the loss of printer settings and functionality (e.g., inability to print in landscape mode or loss of waterm[...]
-
Pagina 68
If the driver persistently fails to initialize then the printer created can still be used, but when clients connect to that printer they will be prompted to install the driver files for that driver locally. The end user will be required to provide driver files for a driver whose name matches the name of the driver associated with the printer on the[...]
-
Pagina 69
1. To access the Driver Management page, select Driver Management (in the web interface under Print Services ). 2. Select the operating system for the driver(s) to be viewed or deleted (or select All Operating Systems ). The corresponding drivers are displayed in the Printer Drivers list box. 3. If desired, highlight the printer driver to delete, e[...]
-
Pagina 70
PSA. Note: After the PSA has been configured and drivers have been associated with printers, the configuration should be backed up . Adding a New Printer Driver To add a driver to the PSA, click on the Driver Management page . The New Printer Driver (Step 1 of 3) page is displayed. This page can also be accessed by clicking on the Add Print Share ([...]
-
Pagina 71
● New Printer Driver page (Step 2 of 3): New Printer Driver (Step 2 of 3) Field Name Description Drivers Highlight the driver to install and click . Note: An XP, 2K, or NT driver must be added before a 9x driver can be added.[...]
-
Pagina 72
● New Printer Driver page (Step 3 of 3): New Printer Driver (Step 3 of 3) Field Name Description Install a driver Select additional printer drivers to install. Additional printer drivers can be installed for the client OS or any previous version of the OS. For example, if the client OS is XP, drivers for 2K, NT, or 9x can be installed. If the cli[...]
-
Pagina 73
If no duplicate drivers were found during installation, the Installing Printer Drivers page is displayed. If, during installation, a duplicate driver has been found, you can either replace or keep the existing one. Installing Printer Drivers page While the drivers selected are being installed and initialized, this screen displays the status of each[...]
-
Pagina 74
After the final status is displayed, click OK . Driver Name Mismatch When installing drivers for multiple operating systems, it is possible that the driver names do not match. Several scenarios and suggestions are possible: Scenario Resolution Windows 2000 and XP drivers will not have the same name as a Windows NT driver Add the same printer to the[...]
-
Pagina 75
[...]
-
Pagina 76
Configuring the Administrator Account Links within this page: Administrator Accounts Local Administrator Accounts Adding a Local Administrator Account Deleting a Local Administrator Account Changing the Password for an Existing Local Administrator Account Domain Administrator Accounts Adding a Domain Administrator Account Single Sign-on (SSO) Basic[...]
-
Pagina 77
1. Log on to the web interface. (The default is "admin" for the user name and "admin" for the password.) 2. On the menu under Security , click Administrators . The Administrators page is displayed: Administrators Page Page Field Names Description Local Administrators Lists all local administrator accounts added to the PSA. Local[...]
-
Pagina 78
Password Type the password. The password is case-sensitive and can contain up to 14 alphanumeric characters and/or the following special characters: ~ ` ! $ % ^ ( ) - _ { } . Note: The PSA will accept a null or blank password. Confirm Password Type the password again to confirm it (if there is a password). Then click to add this administrator to th[...]
-
Pagina 79
Deleting a Local Administrator Account Administrator accounts can be deleted from the PSA, but there always must be at least one administrator account remaining on the PSA. Follow these steps to delete an administrator account: 1. Log on to the web interface. 2. On the menu under Security , click Administrators . The Administrators page is displaye[...]
-
Pagina 80
Confirm Password Type the password again to confirm it (if there is a password). Then click to add this administrator to the PSA. Domain Administrator Accounts If Domain Authentication is enabled on the Microsoft Network Settings page , administrators can be identified by their Microsoft domain account. A list of domain user or group accounts can b[...]
-
Pagina 81
1. Log on to the web interface. 2. On the menu under Security , click Administrators . The Administrators page is displayed. 3. Click under the list of domain administrators. The Administrator-Add Domain Accounts page is displayed. 4. Complete the fields as described below. 5. Click . The message "Administrator Account Added" is displayed[...]
-
Pagina 82
Note: If the Domain Controller is not available, administrators can use their local account . When browsing for domain accounts from the Select Account(s) from list of domains, the PSA may ask for a user name and password. The reason is the domain's security policy requires a trusted user account to connect to the domain controller to retrieve[...]
-
Pagina 83
If an administrator uses a browser other than Internet Explorer, SSO will not be supported; the browser will communicate with the PSA through Basic security and all security information will be passed to the PSA in cleartext. The administrator will be prompted with a Basic security password prompt having two fields and can then either choose to use[...]
-
Pagina 84
SSL Links within this page: SSL Certificates SSL Certificate Page Viewing the SSL Certificate Requesting a New Certificate Self-Signed Certificate Installing a Certificate from a Certificate Authority Links to related pages: Related System Messages Troubleshooting the PSA SSL Certificates SSL/TLS secures the PSA's web interface by providing da[...]
-
Pagina 85
Field Names Description Installed Certificate Type Type of certificate installed (self-signed or CA signed). New Certificate Status Status of the certificate (installed or pending). Encryption strength Low, Medium, or High. Encrypt all web communication Select this to redirect all communication through a secure port (HTTPS). To view the certificate[...]
-
Pagina 86
3. Under Security on the menu, select SSL Certificate . (See the description of the fields above for more information.) 4. Click on the Encryption strength drop-down list and select the cipher value for the certificate ( Low (default), Medium , or High ). 5. To redirect all communication through a secure port (HTTPS), check Encrypt all web communic[...]
-
Pagina 87
Requesting a New Certificate The New Certificate page is displayed after is clicked on the SSL Certificate page. There are two options for a new certificate: ● Create a self-signed Certificate . ● Request a signed certificate from a Certificate Authority .[...]
-
Pagina 88
Creating a Self-Signed Certificate To create a new self-signed certificate, select the radio button for this option on the New Certificate page and click . The Self-Signed Certificate page is displayed. Self-Signed Certificate Page Field Names Description Common Name Fully qualified domain name or IP Address of the PSA. Used to identify the device [...]
-
Pagina 89
To create a new self-signed certificate, follow these steps: 1. At a workstation, access the web browser and type the IP address for the PSA. 2. Log on to the PSA as an administrator . (The default user name is "admin" and the default password is "admin".) 3. Under Security on the menu, select SSL Certificate . (See the descript[...]
-
Pagina 90
Common Name Fully qualified domain name or IP Address of the PSA. Used to identify the device HPX595. rose.hp.com. Organization Full legal name of your company. Organizational Unit Specific department or division within your organization. Locality (City) City in which your organization is physically located. State/ Province State or province (up to[...]
-
Pagina 91
6. Complete the fields on the Request Signed Certificate page ( as described above ). 7. Click . The Certificate Request in PEM Encoding page is displayed. 8. Follow the instructions on the page and click . Installing a Certificate from a Certificate Authority After the signed certificate has been received from the Certificate Authority, follow the[...]
-
Pagina 92
5. Cut and paste the text from the signed certificate into the text box displayed. 6. Click . The web interface will restart and the new certificate will be valid.[...]
-
Pagina 93
Backing Up, Restoring, Reseting, Rebooting, and Upgrading the PSA Links within this page: Backing Up Network Settings and Printer Information Restoring Network Settings and Printer Information (Using the Web Interface) Resetting the PSA to Factory Defaults (Using the Front Panel) Rebooting (or Restarting) the PSA Upgrading the Firmware on the PSA L[...]
-
Pagina 94
Now that there is a backup file for the PSA, settings can be restored if required (see the next section). Note: If the PSA is joined to a domain, the domain password for the domain controller is included in the backup file. When that PSA backup file is restored , it might be necessary to join the PSA to that domain again because the password might [...]
-
Pagina 95
3. Turn on the PSA again by pressing the Power button. 4. During the restart sequence, when the front panel display reads Configuring , press . The following message is displayed: 5. Press to reset the PSA to its factory defaults. Press to cancel the restart process and retain all current configuration information. The PSA will then finish restarti[...]
-
Pagina 96
Drivers for that print share. In the drop-down list, select any other driver and click . Then, select the original driver and click again. Use the following procedure to install an upgrade: 1. Download the firmware image (*.hp) from the HP support website and save it on a local hard drive or CD (http://www.hp.com/cposupport). The exact file locatio[...]
-
Pagina 97
System Summary Links to related pages: Troubleshooting the PSA Viewing and Printing the System Summary Page From the Web Interface This page explains how to view and print the PSA System Summary from the web interface. PSA settings are shown on the System Summary page. To access this page, select System Summary (in the web interface under Diagnosti[...]
-
Pagina 98
Current Firmware Revision Current version of firmware running on this PSA. Base (Factory) Firmware Revision Version of firmware that the PSA would be rolled back to if it was reset to factory defaults . Patches Applied Lists any patches that have been applied to the PSA. BIOS Version Version of the BIOS on the device. Manufacturing Date Code Manufa[...]
-
Pagina 99
Primary Domain Name Server (DNS) Address IP address of the primary DNS server. Secondary Domain Name Server (DNS) Address IP address of the secondary DNS server. DNS Domain Name Name of the IP domain to which this PSA belongs. Auto-negotiate Network link mode (enabled or disabled), speed (10T or 100T), and duplex (full or half). Microsoft Network C[...]
-
Pagina 100
SNMPv1/v2 Read and Write access Allows SNMPv1/v2 read and write access. SNMPv1/v2 Read-only access Allows SNMPv1/v2 read-only access. SNMPv3 Enables and disables SNMPv3 access. SNMPv3 User Name SNMPv3 account name. SNMPv3 Authentication Key Authentication Key for SNMPv3 account. SNMPv3 Privacy Key Privacy Key for SNMPv3 account. SNMP Traps Informat[...]
-
Pagina 101
Parameter Description Installed Certificate Type of certificate installed (Self-Signed or CA signed). New Certificate Status Status of certificate (Installed or Pending). Common Name Fully qualified domain name or IP Address of the PSA. Used to identify the device HPX595.rose.hp.com. Organization Full legal name of your company. Organizational Unit[...]
-
Pagina 102
● The first line lists the printer name, the IP address or hostname, the remote queue name, drivers the share will point and print, any printer properties (for example: Paused , Print Banner , or Hide ), and any share description text. Note: The suffix "CSR" means that driver is capable of client side rendering. When the driver was adde[...]
-
Pagina 103
Diagnostic Report Links to related pages: Administrator Visible Logs System Summary Troubleshooting the PSA Viewing and Printing the Diagnostic Report from the Web Interface This page explains how to view and print the Diagnostic Report for the PSA from the web interface. To access this report, select Diagnostic Report (in the web interface under D[...]
-
Pagina 104
System The values in the section are updated every minute. Parameter Description System Load (past 15 minutes): This metric ranges from 0% to 100% and shows how heavily the PSA has been used in the past 15 minutes. If the System Load often displays over 80%, the PSA is overloaded and some of the printers should be migrated to another PSA. Disk Usag[...]
-
Pagina 105
Connection Status Valid statuses are ● Connected ● Cannot be contacted : The WINS server cannot be found. It does not respond to a network query or ping. ● No entry : The WINS server automatically adds an entry for the PSA onto the WINS server. If there is no entry for the PSA on the WINS server, the WINS server is not functioning properly. D[...]
-
Pagina 106
Printer Status The values in this section are updated each time status is gathered. Parameter Description Share Name Share name for the printer. Printer Address The printer address will be in the format <address>:<queuename>, where address is either the hostname or IP address, depending on what form the administrator entered when creati[...]
-
Pagina 107
Total Packets Received Total number of network packets this unit has received since the last reboot. Total Packets Transmitted Total number of network packets this unit has transmitted since the last reboot. Bad Packets Received Total number of improperly formatted network packets received since the last reboot. A large number of bad packets may in[...]
-
Pagina 108
Event Log Links within this document: Event Log Page Buttons on the Event Log Page Fields on the Event Log Page Event Log Filters Links to related documents: Event Log Messages The Event Log is accessible through the web interface under General. It contains information about the appliance to facilitate troubleshooting and maintenance at your site. [...]
-
Pagina 109
Buttons on the Event Log Page Button Name Description Displays the Event Log Filters page where filters can be selected, based on the message level and type. Only those events with the Level(s) and/or Type(s) selected will be included on the Event Log page. Displays any new events that have occurred. Use this button instead of the browser's Re[...]
-
Pagina 110
Deletes all entries from the Event Log. A confirmation message is displayed. After the log is cleared, a new entry is displayed in the log with the date and time the log was cleared and the name of the administrator who cleared it. Note: If " Filters are ON " is displayed at the top of the log, there might be logged events that are not di[...]
-
Pagina 111
Message Text message that describes the event. Event Log Filters Event Log filters are used to sort messages automatically so that only those messages of a certain type and/or level are displayed. Click to display the Event Log Filters page: The following filters can be selected for events. One or more Type filters and one or more Level filters mus[...]
-
Pagina 112
● NET (Networking) - displays all Networking-related messages ● ADM (Administrative) - displays all Administrative-related messages[...]
-
Pagina 113
Initiated standard shutdown (102) Level: Informational Category: Administrative Description: The PSA was shut down safely. This is generally done by using the power button on the front panel or through Restart (in the web interface under Maintenance ). Completed standard startup (103) Level: Informational Category: Administrative Description: The P[...]
-
Pagina 114
Running on UPS battery due to power failure (105) Level: Informational Category: Administrative Description: A power failure occurred and the PSA began relying on the Uninterruptable Power Supply (UPS) battery for its power. Shutdown initiated due to low UPS battery (106) Level: Informational Category: Administrative Description: After a power disr[...]
-
Pagina 115
Shutdown cancelled. Normal power restored (108) Level: Informational Category: Administrative Description: Normal power has been restored to the PSA, so the PSA is no longer reliant on the UPS (Uninterruptable Power Supply) battery backup. Additionally, the shutdown that was planned for the PSA due to the power disruption has been cancelled. High d[...]
-
Pagina 116
Description: The spool partition on the PSA is at 90-100% of capacity. This may be due to one of the following conditions: ● one or more printers are not online ● connectivity to one or more printers has been disrupted ● unusually high printing volume by users Action: It is necessary for the administrator to take one or more of the following [...]
-
Pagina 117
Description: The DNS domain name provided by DHCP was longer than the maximum number of characters allowed or it included invalid characters. As a result, the DNS domain name provided on the TCP/IP and DNS Settings page is being used. If no DNS domain name has been provided, the default value is used. Action: The administrator should ensure that th[...]
-
Pagina 118
Level: Critical Error Category: Security Description: The PSA was unable to communicate with a Primary Domain Controller (PDC) or a Backup Domain Controller (BDC) (if one is set up) to verify the user's name and password. This means that clients will not be allowed to print because a Domain Controller was not available to verify the user'[...]
-
Pagina 119
● Retype the user name and password combination. ● If the user machine was not in the same domain as the PSA or was not in a trusted domain, the user should type domainuser name and password for correct authentication. ● Verify that the user account exists. ● Monitor the log file for additional unauthorized access attempts. Permission deni[...]
-
Pagina 120
● network problems (cable malfunction, hub, or router problems) ● not on the network ● the IP address or host name specified is not a domain controller ● power is disconnected or interrupted Action: ● Retype the WINS server address in the xxx.xxx.xxx.xxx format on Microsoft Network Settings page and try again. A properly configured WINS s[...]
-
Pagina 121
Controller, the PSA will not be able to authenticate users. Permission denied- user not allowed to delete, pause, or resume print job (213) Level: Error Category: Security Description: The user did not have proper access rights to delete, pause, or resume print jobs. Access rights include: ● Print (print, pause, and delete your own print jobs) ?[...]
-
Pagina 122
● network problems (cable malfunction, hub, or router problems) ● not on the network ● the IP address or host name specified is not a domain controller ● power is disconnected or interrupted Action: ● Retype the DNS server address in the xxx.xxx.xxx.xxx format on Microsoft Network Settings page and try again. A properly configured DNS ser[...]
-
Pagina 123
Properly configured WINS servers are essential for the proper operation of the PSA. If the PSA cannot reach the WINS servers, users on other subnets (on the other side of a router) will not be able to see the PSA in Network Neighborhood. ● If the DNS servers, WINS servers, or Domain Controller are not on the same subnet as the PSA, ensure that th[...]
-
Pagina 124
operational. Authentication failed (217) Level: Error Category: Security Description: The user attempted to access the PSA, but the request was denied because the user identity was not confirmed or user was not authorized to use the PSA. Action: It is necessary for the administrator to take one or more of the following actions: ● retype the name [...]
-
Pagina 125
Authorization failed - domain account (219) Level: Error Category: Security Description: The user attempted to access the PSA, but the request was denied because the user identity was not confirmed or the user was not authorized to use the PSA. Domain account access to the PSA is supported when NT Domain authentication is enabled on the Microsoft N[...]
-
Pagina 126
Cannot communicate with the printer (300) Level: Error Category: Networking Description: Communications between the PSA and the printer were interrupted while the PSA was sending a print job to the printer. This could be due to a potential printer problem. Action: ● Make sure the printer is plugged in and turned on. ● Make sure the IP address e[...]
-
Pagina 127
with no spaces are allowed. Dashes ( - ) and periods ( . ) are also accepted. ● Verify that the domain controllers, WINS servers, and printers have valid DNS entries. Failure to resolve DNS names can cause the PSA to not function properly. For example, if the PSA cannot resolve the Domain Controller's name to an IP address, it cannot authent[...]
-
Pagina 128
● Check to make sure the printer is plugged in, is turned on, and is online. ● Check the status of network components in the print path. This includes whether components are in-service and powered up. ● Check the configuration of network components in the print path. This includes IP addresses and other settings. components include the PSA, t[...]
-
Pagina 129
● paper jam ● printer is off-line ● service required for the printer Action: Fix the identified problem at the printer. Changed IP address (400) Level: Informational Category: Administrative Description: The IP address of the PSA has been changed successfully on the TCP/IP and DNS page of the web interface or through the front panel of the PS[...]
-
Pagina 130
web interface under Print Services ). Changed printer IP address (403) Level: Informational Category: Administrative Description: The IP address for the printer has been changed successfully on the printer's Properties page (in the web interface under Print Services-->Print Shares-- > Properties ). Upgraded firmware (404) Level: Informat[...]
-
Pagina 131
Level: Informational Category: Administrative Description: The event log file has been cleared successfully on the Event Log page (in the web interface under Maintenance ). Backed up settings (407) Level: Informational Category: Administrative Description: The configuration settings for the PSA have been backed up successfully using the Backup feat[...]
-
Pagina 132
Deleted administrator account (410) Level: Informational Category: Administrative Description: The administrator account was removed from the PSA successfully using the remove feature in Administrators (in the web interface under Security ). Changed WINS server address (411) Level: Informational Category: Administrative Description: The WINS server[...]
-
Pagina 133
Category: Administrative Description: NT domain authentication has been enabled on the Microsoft Network Settings page (in the web interface under Networking ). Disabled NT domain authentication (414) Level: Informational Category: Administrative Description: NT domain authentication has been disabled on the Microsoft Network Settings page (in the [...]
-
Pagina 134
Enabled LPD printing for specified hosts (417) Level: Informational Category: Administrative Description: LPD printing has been enabled for selected hosts on the LPD Settings page (in the web interface under Networking ). Disabled LPD printing for all hosts (418) Level: Informational Category: Administrative Description: LPD printing has been disab[...]
-
Pagina 135
Networking ), creation of a machine account failed. This means that Microsoft networking will not work until a machine account has been created. This could be due to any of the following reasons. ● The user name and password combination was not valid. ● The user specified does not have authority to create a machine account. ● The WINS server [...]
-
Pagina 136
Microsoft Network Settings page (in the web interface under Networking ). Changed time (423) Level: Informational Category: Administrative Description: The time was changed successfully on the Date and Time page (in the web interface under Networking ). Removed administrator access from domain accounts (424) Level: Informational Category: Administr[...]
-
Pagina 137
Level: Informational Category: Administrative Description: The level of SSL encryption used for encrypting the http data has been changed successfully. Installed self-signed certificate (427) Level: Informational Category: Administrative Description: A new self-signed certificate (signed by the PSA) has been created and is now on the PSA. Note: If [...]
-
Pagina 138
been installed on the PSA. The new certificate will be used for future connections. Failed to install certificate from a certificate signing authority - the certificate credentials do not match the pending request (430) Level: Error Category: Administrative Description: The attempt to install or replace the existing certificate on the PSA has faile[...]
-
Pagina 139
Enabled SNMP v3 (433) Level: Informational Category: Administrative Description: An SNMPv3 account has been created and installed on the PSA. Disabled SNMP v3 (434) Level: Informational Category: Administrative Description: All SNMPv3 accounts have been removed from the PSA. Added destination to SNMP trap notification list (435) Level: Informationa[...]
-
Pagina 140
Enabled redirection to HTTPS (437) Level: Informational Category: Administrative Description: Redirecting the http request to the secure port has been enabled. Any http request for port 80 will be sent over the SSL (secure socket layer). Disabled redirection to HTTPS (438) Level: Informational Category: Administrative Description: Redirecting the h[...]
-
Pagina 141
Description: The WINS server was deleted successfully on the Microsoft Network Settings page (in the web interface under Networking ). Added DNS server (441) Level: Informational Category: Administrative Description: The DNS server was added successfully on the TCP/IP and DNS page (in the web interface under Networking ). Deleted DNS server (442) L[...]
-
Pagina 142
Category: Administrative Description: The configuration settings for the PSA have failed to back up. A backup file has not been generated. Failed to restore settings from backup file (445) Level: Informational Category: Administrative Description: The configuration settings from the backup file have not been restored. Created NT domain account (446[...]
-
Pagina 143
Category: Administrative Description: The printer driver was successfully installed onto the PSA. Initialized printer driver (501) Level: Informational Category: Administrative Description: The printer driver was successfully initialized on the PSA and can now be used for point and print. Printer driver installation failed (502) Level: Error Catego[...]
-
Pagina 144
❍ the INF file cannot be found. ❍ the process was canceled by the user. ❍ insufficient memory on the PC. ❍ the driver failed to queue correctly. ❍ the path to the .inf file exceeds the 128 character maximum. ❍ the .inf file is for an operating system that is incompatible with the operating system that the user selected. ❍ there is ano[...]
-
Pagina 145
Category: Administrative Description: Drivers for older operating systems (for example, NT) can successfully work with newer operating systems (for example, XP). Consequently, new drivers are not always developed for newer operating systems if an older driver works with the operating system. This message indicates that a newer driver was actually i[...]
-
Pagina 146
System Messages Links within this page: Add Printer and Add Driver Wizards Under Print Services: Print Shares Page Driver Management Page Under Networking: Date/Time Page TCP/IP and DNS Settings Page Microsoft Network Settings Page LPD Printing Page SNMP Settings Page Under Security: Administrators Page SSL Certificate Page Under Maintenance: Backu[...]
-
Pagina 147
Message Explanation / Remedy driver failed to initialize In order for drivers to be deployed to client machines via point and print, the drivers must be properly initialized . If a driver has failed to initialize it will be disabled by the PSA and cannot be enabled (but it can be re-installed). A disabled driver may still be associated with a print[...]
-
Pagina 148
Application Error There may be another instance of the HP Add Driver Wizard running on this PC. Close down all instances of the Add Driver Wizard, then try running the Add Driver Wizard again. There may be another instance of the HP Add Driver Wizard running on this PC. Make sure there are no other instances of the Add Driver Wizard running, then t[...]
-
Pagina 149
Driver does not match OS: The driver information file file_name that was specified for Windows 2000/XP is actually a driver information file for Windows NT 4.0. The specified driver has been installed, but it will appear in your driver list as a Windows NT 4.0 driver. This driver may or may not be compatible with Windows 2000/XP. HP recommends that[...]
-
Pagina 150
Error: Driver does not match OS .inf_file_name is not the correct driver information file for selected_OS . It only contains driver information for OS_supported_by_.inf . The specified driver will NOT be installed. To add a driver for selected_OS , rerun this Add Driver wizard and specify the correct driver setup information file (*.inf). For more [...]
-
Pagina 151
Invalid Driver Setup Information File: file_name could not be read or does not contain any printer drivers. Please specify another driver setup information file (*.inf). The .inf file specified might be corrupted or it might not be a driver setup information file. Verify that the specified .inf file is a printer setup information file and retry. If[...]
-
Pagina 152
Resource Error This Windows system is either out of memory or out of disk space. If it is out of disk space, delete some files and try again. If it is out of memory, restart the system and try again. The Add Driver Wizard requires that your system's physical memory usage be less than 90% and that there is a minimum of 15MB hard disk space on y[...]
-
Pagina 153
Unable to initialize driver for this version of firmware: This driver will be disabled for automatic driver download. Clients attaching to the printer will have to supply their own driver. In order for drivers to be deployed to client machines using point and print, the drivers must be properly initialized . If a driver has failed to initialize it [...]
-
Pagina 154
A print server appliance test page has been queued to the (queue) printer queue. Confirmation message after was pressed. Attempts to print to the printer failed. A configuration (test) page was requested but LPR was not able to print the job on the selected printer. The disk space might be full, or the printer might be off or offline. Cannot be con[...]
-
Pagina 155
No toner Informational message. Off line Informational message. Online Informational message. Paper jam Informational message. Paused Informational message. printing Confirmation message. queued Confirmation message. Service required Informational message. spooling Confirmation message. The IP Address you entered is the address of this PSA. Please [...]
-
Pagina 156
Are you sure you want to remove the following drivers…? One or more drivers were selected and was pressed. Confirm removal or cancel the operation. The HP LaserJet 4 printer driver is essential and cannot be deleted. The HP LaserJet 4 printer driver is a default driver and cannot be deleted. The following drivers are in use and cannot be deleted.[...]
-
Pagina 157
The necessary information to set the date and time was not found. The date and/or time fields are blank. Complete both fields and click . Your date and time settings have been applied. Confirmation message. TCP/IP and DNS Settings Page Message Explanation / Remedy DNS server IP address cannot be contacted. Informational. Gateway is not a valid gate[...]
-
Pagina 158
Message Explanation / Remedy Connected Confirmation message. Invalid administrator name: name The administrator name consists of the domainname administratorname or the adminstratorname. The administrator portion of the administrator name can be up to 20 characters long and include alphanumeric characters and the following special characters: ~ ` [...]
-
Pagina 159
This field's value is being assigned by DHCP. If you remain in DHCP mode, your changes to this field will be lost. Self-explanatory. WINS server IP address cannot be contacted. Informational. WINS server IP address has no entry for this PSA. Informational. You must specify your domain administrator name and password to join the NT domain. Spec[...]
-
Pagina 160
Invalid Port Number: port number The port number must be between 0 and 65535. System call error Reapply the last command. Administrators Page Message Explanation / Remedy Name(s) cannot be contacted. The domain controller(s) cannot be contacted. Check that you have entered the correct Domain Controller. A name is required for the user account. Type[...]
-
Pagina 161
No password set. The domain administrator name or password is incorrect. Retype them. Not configured. Informational. No DNS entry for domain controller: name(s) . Informational. No entry in the WINS server for the domain. Informational. No entry in the WINS server for the Domain Controller. Informational. Passwords don't match The password and[...]
-
Pagina 162
An I/O Error occurred while transferring the file. The specified file name is not a valid upgrade file. Retype the file name and try again. Another backup, restore, upgrade is already in progress. Informational. Backup, Restore, Upgrade in progress. Informational. Error executing setup. Reboot appliance to continue upgrading. Verify the file is a v[...]
-
Pagina 163
No restore items were selected. Please select at least one item. Click at least one option and then continue the restore process. No upgrade, backup file was provided with the upgrade, restore request. Type the file name and path and retry the upgrade or restore process. No upgrade file was provided with the upgrade request. No upgrade file was tra[...]
-
Pagina 164
The specified file is not a valid PSA configuration, upgrade file. Retype the complete path to the configuration file (for example, "C:TEMP file .HP") or click Browse to find the saved file or firmware image. The specified upgrade file cannot be used to upgrade this PSA. Please check for a newer upgrade file. Verify the file is a valid [...]
-
Pagina 165
Troubleshooting the HP Print Server Appliance Links within this page: Hardware Problems Configuration Problems Printing Problems Printer Driver Problems Security Problems About the Indicator Lights (LEDs) Links to related pages: System Messages Event Log and Messages Frequently Asked Questions Diagnostics Note: Always check the Event Log for messag[...]
-
Pagina 166
3 The Power On LED is lit, but the Network LED does not light. ● The RJ-45 network cables are not connected. Securely connect the network cables. ● The cable may be faulty. See if another device can communicate on the network using the same cable. ● Verify the hub or switch is connected and working properly. 4 The Alert LED is lit. ● The PS[...]
-
Pagina 167
1 I can't find the PSA in Network Neighborhood. ● The PSA will install itself in the workgroup called workgroup . If there are no PCs in this workgroup, the PSA will not show up in network neighborhood. Microsoft (R) browsing requires a PC in the workgroup to host a browse list. The administrator must change the workgroup name through the We[...]
-
Pagina 168
6 I am trying to use the Properties page in Network Neighborhood to configure the PSA, but the PSA seems to ignore some of my settings. The PSA uses the printer configuration page on the Printer Properties window (which is displayed after right-clicking on a printer and then selecting Properties) for driver configuration changes and recognizes some[...]
-
Pagina 169
7 I keep getting prompted for a password when I use a web browser to access the PSA even though the PSA is a member of a domain. Whether you get prompted for a password and what the password prompt looks like are a function of your web browser and its configuration. If the PSA is a member of a domain, it will always ask your browser to use your exi[...]
-
Pagina 170
13 I get prompted for a password when I use a web browser to access the PSA even though the PSA is a member of a domain. Whether you get prompted for a password and what the password prompt looks like are a function of your web browser and its configuration. If the PSA is a member of a domain, it will always ask your browser to use your existing Wi[...]
-
Pagina 171
2 I have not been able to print from any client to the intended printer. ● The IP address or printer name may not be correctly configured for the desired printer. Verify that the PSA can print to the printer by using the "print test page" functionality of the printer property page in the web interface of the PSA. If the test page does n[...]
-
Pagina 172
7 The status of a print job is Unknown on the Jobs page for that printer in the web interface. Delete the print job and resend it. 8 I am trying to print a large print file. Is there a maximum size of print job that the PSA will handle? There is no limit for a file size that the PSA can handle. 9 There are a lot of jobs spooled on the PSA. Is there[...]
-
Pagina 173
At the command prompt of a Windows NT or Windows 2000 computer, type the following commands: ❍ The following command verifies an entry for the PSA name: nslookup printappliancename.domain DNS server IP address (For example: nslookup mypsa.usa 192.168.100.90) If the name lookup does not reply with the PSA's IP address, that means there is no [...]
-
Pagina 174
13 HP LaserJet print jobs are missing text of graphics, or are printing garbage. It is strongly recommend that the PSA's firmware be upgraded to latest (2.4.x or newer) to alleviate problems with printer drivers. Click here to download the latest firmware for the PSA. Remove the printer driver from the PSA and from any computer printing to tha[...]
-
Pagina 175
3 I am trying to add a printer driver to the PSA, but I keep getting the error: Unauthorized to perform this action . In order to install drivers onto the PSA, a user must be logged onto their PC with a user account that has permission to install software on that PC, and have a corresponding administrator account on the PSA. If NT domain authentica[...]
-
Pagina 176
Security Problems If the PSA is joined to a domain, the domain password for the domain controller is included in the backup file. When that PSA backup file is restored , it might be necessary to join the PSA to that domain again because the password might have changed since the backup file was created. About the Indicator Lights (LEDs) There are fo[...]
-
Pagina 177
Frequently Asked Questions Links within this document: Configuration Printing Printer Drivers Power Outages Configuration 1. Can I use Web Jetadmin to manage my PSA? 2. Does the PSA support bootp or rarp? 3. What features on the Properties Page in Network Neighborhood are supported by the PSA? 4. Can I use a hyphen in the PSA name? 5. Can the PSA i[...]
-
Pagina 178
4. Can the PSA accept print jobs from UNIX clients? 5. Can I print over my network using Novell as the network OS? 6. What is the limit on the number of jobs that can be spooled? 7. How are print jobs sent to the PSA? 8. How are print jobs sent from the PSA to the printer? 9. I am trying to print in Landscape mode, Duplex mode, or multiple copies, [...]
-
Pagina 179
Power Outages 1. What happens if the PSA experiences an unplanned power interruption? 2. How do I connect an uninterruptible power supply (UPS)? 3. How does an uninterruptible power supply (UPS) work with the PSA PSA when the power fails? Answers Configuration 1. Can I use Web Jetadmin to manage my PSA? Yes, With Web JetAdmin 7.2 (and above), and t[...]
-
Pagina 180
■ Hold mismatched documents check box - not supported ■ Print spooled documents first check box - not supported (the PSA always uses this behavior) ■ Keep documents after they have printed check box - not supported ❍ Sharing tab ■ Not Shared toggle - not supported (may be selected but will be ignored) ■ Shared toggle - supported ■ Sha[...]
-
Pagina 181
updated with the new PSA. Depending on the size and speed of the network, it may take up to 30 minutes before the network's master browser list gets updated. ● Once this browser list gets updated on the PC that's hosting this list, other PCs on the network will check the browser list and be able to see any new devices on the network via[...]
-
Pagina 182
networking protocol. LPD (Line Printer Daemon) is an Internet standard (RFC 1179) supported by many operating systems. 8. How are print jobs sent from the PSA to the printer? The PSA uses LPD to send the print job to the printer. 9. I am trying to print in Landscape mode, Duplex mode, or multiple copies, but the margins are offset. If you have not [...]
-
Pagina 183
printappliance IP Address DNS server IP address (For example: nslookup 192.168.100.80 192.168.100.90) If the IP address lookup does not reply with the print server appliance name, it means there is no entry for the print server appliance in the DNS server's Reverse Lookup table. The Reverse Lookup table is the table the print server appliance [...]
-
Pagina 184
2. I am using Internet Explorer 6 and am trying to install and initialize a driver. I keep getting a message about Java having to be turned on. How do I do this? Before drivers can be installed, Java must be installed and JavaScript enabled in your web browser. JavaScript can be enabled in Internet Explorer, under: Internet Options-->Security (t[...]
-
Pagina 185
Drivers for Microsoft Windows NT 4.0 usually work with both Windows 2000 and Windows XP. Consequently, many vendors will label a driver as Windows 2000 or XP when the driver conforms to the NT 4.0 driver specification. Since there is no unique XP driver specification, drivers labeled by a printer vendor for XP will always appear as either NT 4.0 or[...]
-
Pagina 186
3. What happens if the PSA experiences an unplanned power interruption? After a power outage the PSA will automatically recover and rebuild its settings as necessary. To reduce the chance of data loss, the PSA can be connected to a UPS. (See the questions regarding UPS below.) Print jobs that were printing and print jobs that were spooled but not p[...]
-
Pagina 187
Contact HP General Information (The central location on HP's web site for the HP Print Server PSAs and similar products) Online Customer Forum (Where customers can discuss ideas and suggestions for using the HP PSAs) Customer Support (Lists all of the support options offered by HP and contact information such as phone numbers and e-mail addres[...]
-
Pagina 188
Warranty, Regulatory, and Licensing Information Links within this page: Hewlett-Packard Limited Warranty Statement Regulatory Compliance Declaration of Conformity Trademarks and Copyrights HP Software License HP Limited Warranty/Limitation of Liability Software Copyright Notices Other Software Licenses Hewlett-Packard Limited Warranty Statement HP [...]
-
Pagina 189
(b) software, interfacing, parts, or supplies not supplied by HP, (c) unauthorized modification or misuse, (d) operation outside of the published environmental specifications for the product, or (e) improper site preparation or maintenance. 8. TO THE EXTENT ALLOWED BY LOCAL LAW, THE ABOVE WARRANTIES ARE EXCLUSIVE AND NO OTHER WARRANTY OR CONDITION,[...]
-
Pagina 190
Installing this equipment in an FCC Level B product results in an FCC Level A Composite System (as defined in the FCC Rules and Regulations) when attached to an Ethernet (IEEE 802.3/802.3u) or Token Ring (IEEE 802.5) network. European Community This is a class A product. In a domestic environment, this product may cause radio interference, in which[...]
-
Pagina 191
Manufacturer's Name: Hewlett-Packard Company Manufacturer's Address: 8000 Foothills Blvd. Roseville, CA 95747-5677 U.S.A. declares that the product: Product Name: HP Print Server Appliance 4250 (Model Number J7941A) HP Print Server Appliance 4200 (Model Number J4117A) HP JetDirect 4000 Network Print Appliance ( Model Number: J4107A) confo[...]
-
Pagina 192
Trademarks and Copyrights Copyright (C) Hewlett-Packard Co. 1999-2003 This information is subject to change without notice and is provided "as is" with no warranty. Hewlett-Packard shall not be liable for any direct, indirect, special, incidental or consequential damages in connection with the use of this material. Microsoft, MS-DOS, Wind[...]
-
Pagina 193
not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. THE WARRANTY TERMS CONTAINED IN THIS STATEMENT, EXCEPT TO THE EXTENT LAWFULLY PERMITTED, DO NOT EXCLUDE, RESTRICT, OR MODIFY AND ARE IN ADDITION TO THE MANDATORY STATUTORY RIGHTS APPLICABLE TO THE SALE OF THIS PRO[...]
-
Pagina 194
Copyright 1999-2003 Hewlett-Packard Company All rights reserved worldwide. Portions of this software are also: Copyright (c) 2000 Carnegie Mellon University Copyright (c) 1995-2001 The Internet Software Consortium Copyright (c) 2001 Python Software Foundation Copyright (c) 1983 Regents of the University of California Copyright (c) 1995-1997 The Apa[...]
-
Pagina 195
Copyright (c) 1999,2000 Wichert Akkerman Copyright (c) 1995 by Wietse Venema Copyright (c) 1990-2001 Info-ZIP Copyright (c) 1988,1990,1993 by Paul Vixie Copyright (c) 1992 by Panagiotis Tsirigotis Copyright (c) 1995-1998 Jean-loup Gailly and Mark Adler Copyright (c) 1994-1996,1998-2002 Other Software Licenses This product includes software licensed[...]
-
Pagina 196
(412) 268-4387, fax: (412) 268-7395 tech-transfer@andrew.cmu.edu 4. Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by Computing Services at Carnegie Mellon University (http://www.cmu.edu/ computing/)." CARNEGIE MELLON UNIVERSITY DISCLAIMS ALL WARRANTIES WITH REGAR[...]
-
Pagina 197
DISCLAIMS ANY REPRESENTATION OR WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE OR THAT THE USE OF PYTHON 2.2 WILL NOT INFRINGE ANY THIRD PARTY RIGHTS. 5. PSF SHALL NOT BE LIABLE TO LICENSEE OR ANY OTHER USERS OF PYTHON 2.2 FOR ANY INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES OR LOSS AS A RESULT OF MODIFYING, DISTRIBUTING, OR OTH[...]
-
Pagina 198
software developed by the Apache Group for use in the Apache HTTP server project (http://www.apache. org/)." THIS SOFTWARE IS PROVIDED BY THE APACHE GROUP ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN [...]
-
Pagina 199
warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations. Finally, any free program is threatened constantly by software patents. We wish to a[...]
-
Pagina 200
on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of deri[...]
-
Pagina 201
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute s[...]
-
Pagina 202
FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is [...]
-
Pagina 203
`Gnomovision' (which makes passes at compilers) written by James Hacker. <signature of Ty Coon>, 1 April 1989 Ty Coon, President of Vice This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary a[...]
-
Pagina 204
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that companies distributing free software will individually obtain patent licenses, thus in effect transforming the program into proprietary software. To prevent this, we have made it clear that any patent must be licensed for everyone's free us[...]
-
Pagina 205
complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library. Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a progr[...]
-
Pagina 206
3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version 2 of the or[...]
-
Pagina 207
Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine-readable "work that uses the Library", as object code and/or source code, so that the user can modify the Library and then relink to produce a modified executable containing the modified Library. (It is understood that the user wh[...]
-
Pagina 208
11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute [...]
-
Pagina 209
FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Libraries If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free sof[...]
-
Pagina 210
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. The end-user [...]
-
Pagina 211
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. All advertising materials mentioning features or use of this software must display the following acknowledgment: "This product includes [...]
-
Pagina 212
6. The OpenLDAP Foundation may revise this license from time to time. Each revision is distinguished by a version number. You may use the Software under terms of this license revision or under the terms of any subsequent revision of the license. THIS SOFTWARE IS PROVIDED BY THE OPENLDAP FOUNDATION AND CONTRIBUTORS ``AS IS'' AND ANY EXPRES[...]
-
Pagina 213
(Note: The above license is copied from the BSD license at: http://www.opensource.org/licenses/bsd-license.html, substituting the appropriate references in the template.) (end) This program, "bzip2" and associated library "libbzip2", are copyright (C) 1996-2000 Julian R Seward. All rights reserved. Redistribution and use in sour[...]
-
Pagina 214
Copyright (c) 1990, 1993, 1994, 1995, 1996, 1997, 1998 Sleepycat Software. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the follo[...]
-
Pagina 215
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARI[...]
-
Pagina 216
3. All advertising materials mentioning features or use of this software must display the following acknowledgement: "This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)" The word 'cryptographic' can be left out if the rouines from the library being used are not cryptographic related :-). 4. If[...]
-
Pagina 217
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ==================================================================== This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). This product includes software written by Tim Hudson (tjh@cryptsoft.com). This software is copyright 1988[...]
-
Pagina 218
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission. T[...]
-
Pagina 219
The definitive version of this document should be available at ftp://ftp.info-zip.org/pub/infozip/license.html indefinitely. Copyright (c) 1990-2001 Info-ZIP. All rights reserved. For the purposes of this copyright and license, "Info-ZIP" is defined as the following set of individuals: Mark Adler, John Bush, Karl Davis, Harald Denker, Jea[...]
-
Pagina 220
obligation to send him modified source code ceases. It is not allowed to remove these restrictions from the distribution of the Vim sources or parts of it. These restrictions may also be used for previous Vim releases instead of the text that was included with it. Copyright 1988,1990,1993 by Paul Vixie All rights reserved Distribute freely, except:[...]
-
Pagina 221
this file and will be responsible for any wrong behavior of the modified software. The author makes no representations about the suitability of this software for any purpose. It is provided "as is" without any express or implied warranty. Modifications: Version: 2.1.8.7-current Copyright 1998-2001 by Rob Braun Sensor Addition Version: 2.1[...]
-
Pagina 222
receiving lengthy legal documents to sign. The sources are provided for free but without warranty of any kind. The library has been entirely written by Jean-loup Gailly and Mark Adler; it does not include third-party code. If you redistribute modified sources, we would appreciate that you include in the file ChangeLog history information documentin[...]
-
Pagina 223
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the n[...]