HP (Hewlett-Packard) B6R49AS#ABA manuale d’uso

HP L2401x and x2401 LED Backlit Monitors User Guide[...]

© 2012, Hewlett-Packard Development Company, L.P. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herei[...]

About This Guide This guide provides information on setting up the mo nitor, installing the VESA adapter plate, contacting HP support, and technical specifications. WARNING! Text set off in this manner indicates that fail ure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failur[...]

iv About This Guide[...]

Table of contents 1 Product Features ................... ........................... ............................ ........................ ......... .... 1 HP LED B acklit Mo nitors ...... ......... ............ ......... ........... ......... ........... ......... ........... ......... ....... ..... 1 2 Setting Up the Monitor ......... ...........[...]

vi[...]

1 Product Features HP LED Backlit Monitors Figure 1-1 HP L2401x/x2401 Monitors The monitors have an active matrix, thin-film tran sistor (TFT) panel. Th e mo nitor models and features include: ● L2401x/x2401 model s, 60.96-cm (24- inch) diagonal view able area disp lay with 1920 x 1080 resolution ● Non-glare panel with an LED backlight that c o[...]

2 Setting Up the Monitor To set up the monitor, ensure th at the power is turned off to the monitor, co mputer system, and other attached dev ices, and the n follow th e instructions below. Extending the Monitor Stand 1. Lift the monitor from its box and place it face down on a flat surface. 2. Grasp the stand and pull upward until fully extended. [...]

Side connectors Figure 2-2 Side connectors Table 2-1 Side co nnectors Connector Function 1 DisplayPort Connects the DisplayPor t video cable (provided with select models) from the computer to the monitor 2 HDMI Connects the HDMI video cable (p rovided with select models) from the computer to the monitor 3 DC Power Jack Connects the external power a[...]

Connecting the Cables 1. Place the monitor in a convenient, well-v entilated location near the computer. Figure 2-3 Connecting the monitor 2. Connect one end of the DisplayPort signal cable (p rovided with select mo dels) to the DisplayPort connector on the side of the monitor and the other end to the DisplayPort connector on the computer. 3. Conne[...]

Front Panel Controls Figure 2-4 Monitor front panel controls Table 2-2 Monitor front panel controls Control Function 1 Power LED Blue = Fully powered. Amber = Sleep mode. Off = Off mode. 2 Power Turns the monitor on or off. 3 Menu Opens, selects or exits the OSD menu. 4 Minus Moves the OSD cursor down /decreases the OSD adjustment level. 5 Plus Mov[...]

Adjusting the Tilt Tilt the monitor's panel to set it to a comfortable eye level. Figure 2-5 Tilting the monitor VESA Adapter Plate The monitor includes a VESA 100 mm x 100 mm (3.9 in x 3.9 in) ad apter plate. This can b e used to attach the monitor panel to a VESA -compatible device (p urchased sepa rately), such as a stand, swing arm, or oth[...]

Safety Information This product has not been evaluate d for connection to an “IT” power system (an AC distribution system with no direct connect ion to the earth, according to IEC 6 0950). WARNING! Always disconnect the moni tor from the power source before lifting, moving, or removing the stand from your monito r. Failure to do so can resul t [...]

5. Remove the four screws from the monitor stand. Figure 2-7 Removing the screws from the monitor stand Save the monitor stand and the four screws, in the event that you decide to convert your monitor back to a desktop monitor in the future. 8 Chapter 2 Setting Up the Monitor[...]

Installing the VESA Adapter Plate onto the Monitor NOTE: This apparatus is intended to be supporte d by a UL or CSA Listed wall-mount bracket . 1. Remove the stand from the monitor panel. Refer to Removing the Stand from the Monitor on page 7 . 2. Install the VESA adapter plate that shipped with the monitor. a. With the monitor face down on the tab[...]

b. Secure the lower edge of the VESA adapter pl ate to the bracket hinge with four screws. Figure 2-9 Securing the VESA adapt er plate 3. To attach the monitor to a VESA-compatible device (purchased separa tely), follow the instructions included with that device to ensure that the monitor is safely attached. CAUTION: This monitor supports the VESA [...]

4. Remove the four screws secur ing the lower ed ge of the VESA adapter plate to the bracket hinge. Figure 2-10 Removing the sc rews secu ring the VESA adapter plate 5. Slide the VESA adapter plate toward the lower edge of the monitor and off the bra cket hinge. Figure 2-11 Removing the VESA ad apter plate VESA Adapter Plate 11[...]

Replacing the Stand 1. Align the monitor stand ov er the bracket hi nge and secure it wi th the four screws. Figure 2-12 Securing the monit or stand 2. Attach the hinge cover. Figure 2-13 At taching the stand hinge cover 12 Chapter 2 Setting Up the Monitor[...]

Turning on the Monitor 1. Press the power button on the front of the monitor to turn it on. 2. Press the power button on the computer to turn it on. CAUTION: Burn-in image damage may occur on monitors that display the same static image on the screen for a pr olonged perio d of time (12 or more consecutive hours of no n-use). To avoid burn-in image [...]

3 Finding More Information Refer to the HP LCD Monitors Reference Guide included on the CD with your monitor for additional information on: ● Optimizing monitor performance ● Safety and maintenance guidelines ● Installing software from the CD ● Using the OSD menu ● Downloading sof tware from the Web ● Agency regulatory information ● T[...]

A Technical Specifications NOTE: All specifications represent the typical specifications provided by HP compo nent manufacturers; actual performance may vary either higher or lower. L2401x/x2401 Models Table A-1 L2401x/x2401 Specifications Display Type 60.96 cm MVA (Multi-domain Ve rtical Alignment 24 in Viewable Image Size 60.96 cm diagonal 24 in [...]

Table A-1 L2401x/x2401 Specifications (continued) Altitude: Operating Storage 0 to 5,000 m 0 to 12,192 m 0 to 16,400 ft 0 to 40,000 ft Measured Powe r Consumption: Full Power Typical Settings Sleep Switch Off 28 W 23 W <0.5 W <0.5 W Input Terminal DisplayPort connector (ca ble included with select models) and HD MI connector (cable included w[...]

Table A-2 Factory Preset Modes (continued) Preset Pixel Format Horz Freq (kHz) Vert Freq (Hz) 15 1680 × 1050 65.29 59.954 16 1920 × 1080 67.50 60.00 Energy-saver Feature The monitors support a reduced po wer state. The red uced power state will be entere d into if the monitor detects the absence of either the horizontal sync signal and/ or the ve[...]