Husqvarna 67521 ES manuale d’uso

200 8 -0 1 O 0 8 020 23 67 521 ES Operator's Manual Operator's Manual Walk M o wer 9 614300 3 10 0[...]

[...]

2 WARNING: Battery posts, terminals and related ac cessories contain lead and lead compounds, chemicals known to the State of Cal ifornia to cause can cer and birth defects or oth er re productive harm. Wash hands after handling. WARNING: Engine exhaust, some of its constituents, and certain vehicle com po- nents contain or emit chem icals known to[...]

3 SAFETY RULES ......................................................... 2-3 PRODUCT SPECIFICA TIONS ....................................... 3 CUSTOMER RESPONSIBILITIES ................................. 3 ASSEMBL Y .................................................................... 4 OPERA TION .....................................................[...]

4 AS SEMBL Y Read these instructions and this man ual in its entirety before you attempt to assemble or operate your new lawn mow er . IMPORT ANT : THIS L AWN MOWER IS SHIPPED WITH OUT OIL OR GASOLINE IN THE ENGINE. Y our new lawn mower has been as sembled at the factory with the ex ception of those parts left unassembled for shipping purposes. All[...]

5 KNOW Y OUR L A WN MOWER READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERA TING YOUR L AWN MOWER. Compare the illustrations with your lawn mower to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. MEETS CPSC SAFETY REQUIREMENTS Our rotary walk-behind power lawn mowers conf[...]

6 TO CONVERT MOWER Y our lawn mower was shipped ready to be used as a mulcher . T o convert to bagging or discharging: REAR BAGGING (See Fig. 6) • Lift rear door of the lawn mower and place the grass catcher frame hooks onto the door pivot pins. • T o convert to mulching or dis charging operation, remove grass catch er and close rear door . HOW[...]

7 PIVOT PINS REAR DOOR GRASS CA TCHER HANDLE CA TCH ER FRAME HOOK FIG. 6 OPERA TION SIDE DISCHARGING (See Fig. 7) • Rear door must be closed. • Open mulcher door and install dis charge deflector under door as shown. • Mower is now ready for discharging operation. • T o convert to mulching or bagging operation, dis charge deflector must be r[...]

8 ENGINE OIL CAP GASOLINE FILLER CAP FIG. 9 MOWING TIPS CAUTION: Do not use de-thatcher blade attachments on your mower . Such attach- ments are hazardous, will damage your mower and could void your warranty . • Under certain conditions, such as very tall grass, it may be necessary to raise the height of cut to reduce pushing effort and to keep f[...]

9 Check f or Loose F asteners Clean / Inspect Grass Catcher * Check Tires Check Driv e Wheels *** Clean Lawn Mo wer **** Clean under Drive Co ver *** Check Driv e Belt / Pulleys *** Check / Sharpen / Replace Blade Lubrication Clean and Recharge Batter y ** Check Engine Oil le v el Change Engine Oil Clean Air Filter Inspect Muffler Replace Spark Plu[...]

10 L AWN MOWER Always observe safety rules when performing main tenance. TIRES • Keep tires free of gasoline, oil, or insect control chem- icals which can harm rubber . • Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage. DRIVE WHEELS Check front drive wheels each time be fore you mow to be sure they mo[...]

11 TO CLEAN AIR FIL TER 1. Loosen screw and tilt cover to re move. 2. Carefully remove cartridge. 3. Clean by gently tapping on a flat surface. If very dirty , replace car tridge. CAUTION: P e troleum solvents, such as kerosene, are not to be used to clean cartridge. They may cause de terioration of the cartridge. Do not oil car tridge. Do not use [...]

12 L AWN MOWER TO ADJUST CUTTING HEIGHT See “TO ADJUST CUTTING HEIGHT” in the Operation section of this manual. REAR DEFLECTOR The rear deflector , attached between the rear wheels of your mower , is provided to minimize the possibility that objects will be thrown out of the rear of the mower into the operator's mowing position. If the def[...]

13 MOWING POSITION MOWING POSITION HIGH POSITION L OW POSITION HANDLE BRACKET HAIRPIN COTTER MOUNTING PIN FIG. 17 ENGINE ENGINE SPEED Y our engine speed has been factory set. Do not attempt to increase engine speed or it may result in personal injury . If you believe that the engine is running too fast or too slow , take your lawn mower to an autho[...]

14 ENGINE FUEL SYSTEM IMPORT ANT : IT IS IMPORT ANT TO PREVENT GUM DEPOSITS FROM FORMING IN ESSENTIAL FUEL SYSTEM P ARTS SUCH AS CARBURETOR, FUEL FIL TER, FUEL HOSE, OR T ANK DURING STORAGE. ALCOHOL BLENDED FUELS (CALLED GASOHOL OR USING ETHANOL OR METHANOL) CAN A TTRACT MOISTURE WHICH LEADS TO SEP ARA TION AND FORMA TION OF ACIDS DURING STORAGE. A[...]

15 Does not start 1. Dirty air filter . 1. Clean/replace air filter . 2. Out of fuel. 2. Fill fuel tank. 3. Stale fuel. 3. Empty fuel tank and refill tank with fresh, clean gasoline. 4. Water in fuel. 4. Empty fuel tank and refill tank with fresh, clean gasoline. 5. Spark plug wire is disconnected. 5. Connect wire to plug. 6. Bad spark plug. 6. Rep[...]

16 ROT ARY L A WN MOWER - - MODEL NUMBER 67521ES (96143003100) - PRODUCT NUMBER 961 43 00-31[...]

17 ROT ARY L A WN MOWER - - MODEL NUMBER 67521ES (96143003100) - PRODUCT NUMBER 961 43 00-31 NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm IMPORT ANT : Use only Original Equipment Manufacturer (O .E.M.) replacement parts. F ailure to do so could be hazardous, damage your lawn mower and void your warranty . KEY P ART NO . NO.[...]

18 ROT ARY L A WN MOWER - - MODEL NUMBER 67521ES (96143003100) - PRODUCT NUMBER 961 43 00-31[...]

19 ROT ARY L A WN MOWER - - MODEL NUMBER 67521ES (96143003100) - PRODUCT NUMBER 961 43 00-31 NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm IMPORT ANT : Use only Original Equipment Manufacturer (O .E.M.) replacement parts. F ailure to do so could be hazardous, damage your lawn mower and void your warranty . KEY P ART NO . NO.[...]

20 SECTION 1: LIMITED W ARRANTY Husqvarna Forest & Garden Company (“Husqvarna”) warrants Husqvarna product to the original purchaser to be free from defects in material and workmanship from the date of purchase for the “W arranty Period” of the product as set forth below: Lifetime W arranty (Parts and Labor): All tiller tines and trimme[...]