Husqvarna PZ6034FX manuale d’uso

Please read the operator’ s manual car efully and mak e sur e you understand the instructions befor e using the machine. Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will v oid the product war ranty . Operator Manual PZ7234FX / 966614701 PZ6034FX / 966614401[...]

©2011. All rights reserved. Orangeburg, SC. Printed in U.S.A. T o implement improvements, specifications and designs can be altered without prior notification. Note that no legal demands can be placed based on the information contained in these instructions. Use only original parts for repairs. The use of other parts voids the warranty . Do not [...]

CONTENTS INTRODUCTION ............................................................... 5 Driving and T ranspor t on Public Roads ...................... 5 T owing ......................................................................... 5 Operating .................................................................... 5 Good Service ...................[...]

W ARNING! Failure to follow cautious operating practices can result in serious injury to the operator or other persons. The owner must understand these instructions, and must allow only trained persons who understand these instructions to operate the mower . Each person operating the mower must be of sound mind and body and must not be under the in[...]

5 INTRODUCTION Congratulations Thank you for purchasing a Husqvarna ride-on mower . This machine is built for superior efficiency to rapidly mow primarily large areas. A contr ol panel easily accessible to the operator and a hydrostatic transmission regulated by steering contr ols both contribute to the machine’s perfor mance. This manual is a v[...]

6 INTRODUCTION Good Service Husqvarna’s products are sold all over the world and only in specialized retail stor es with complete service. This ensures that you as a customer r eceive only the best support and service. Before the product is delivered, the machine has, for example, been inspected and adjusted by your retailer . See the certificat[...]

SYMBOLS AND DECALS 7 R N IMPORT ANT INFORMA TION Xxxx xxxxxx xxxxx xxxx xxxxxxxxx xxxxxx xxxxxxxxx. xx xxxxxxxx xxxx xxxxxx. W ARNING! Xxxx xxxxxx xxxxx xxxx xxxxxxxxx xxxxxx xxxxxxxxx. xx xxxxxxxx xxxx xxxxxx. These symbols are found on the machine and in the operator’s manual. Study them carefully so that you know what they mean. Used in this p[...]

SYMBOLS AND DECALS 8 Moving sharp blades under cover W arning! Rotating blades, keep away from the discharge deck Do not touch parts Battery acid is corrosive, explosive and flammable Read Operator’s Manual Shut off engine and remove key befor e perfor ming any maintenance or repair work Keep a safe distance from the machine Use on slopes no gre[...]

SAFETY 9 0000-000 Read the operator’ s manual bef ore star ting the machine 0000-000 Clear the area of objects bef ore mowing Safety Instructions These instructions are for your safety . Read them carefully . W ARNING! THIS CUTTING MACHINE IS CAP ABLE OF AMPUT A TING HANDS AND FEET AND THROWING OBJECTS. F AILURE TO OBSER VE THE FOLLOWING SAFETY I[...]

SAFETY 10 8011-520 Ne ver tak e passengers W ARNING! Engine exhaust and certain vehicle components contain or emit chemicals considered to cause cancer , birth defects, or other reproductive system damage. The engine exhaust contains carbon monoxide, which is an odorless, colorless, poisonous gas. Do not use the machine in enclosed spaces. • Dise[...]

SAFETY 11 Personal Safety Equipment • Make sure that you have first aid equipment close at hand when using the machine. • Never use the machine when barefoot. • Always wear protective shoes or boots, pr eferably with steel toe caps. • Always wear approved pr otective glasses or a full visor when assembling or driving. • Always wear glove[...]

SAFETY 12 • Do not use on steep slopes. • Do not try to stabilize the machine by putting a foot on the ground. • Do not mow near drop-of fs, ditches, or embankments. The machine could suddenly roll over if a wheel is over the edge or if the edge caves in. 0000-000 Be e xtra cautious when driving on slopes 0000-000 Ne ver allo w children to op[...]

SAFETY 13 8011-516 Ne ver fill the fuel tank indoors W ARNING! The engine and the exhaust system become very hot during operation. There is risk for burns if touched. Allow engine and exhaust system to cool before refueling. Safe Handling of Gasoline T o avoid personal injur y or property damage, use extreme car e in handling gasoline. Gasoline is[...]

SAFETY 14 8011-515 Ne ver driv e the machine in an enclosed space W ARNING! The battery contains lead and lead compounds, chemicals that are considered to cause cancer , birth defects, and other reproductive system damage. W ash your hands after handling the battery . W ARNING! Use protective glasses for maintenance work. General Maintenance • Ne[...]

SAFETY 15 8009-728 Risk of sparking W ARNING! A void electrical sparking and its consequences by the following routines: 8011-514 Regularly clean deck Sparking can occur when working with the battery and the heavy cables of the starter circuit. This can cause battery explosion, fire or eye injury . Sparking in this circuit can not occur after the [...]

SAFETY 16 T ransport 1. The machine is heavy and can cause serious crushing injuries. Be extra cautious when it is loaded on or unloaded from a vehicle or trailer . 2. Use an approved trailer to transport the machine. Activate the parking brake, turn off the fuel supply , and fasten the machine with approved fastening devices, such as bands, chains[...]

SAFETY 17 Rollover Protection System (ROPS) The ROPS increases the basic weight of the unit by 73 lbs/33 kg. • Do not use ROPS as a lifting, attaching or anchoring point. • Do not use ROPS for wrecking or towing. • Do not exceed Max GVW: 2822 lbs/1283 kg. • Read machine’s operator manual before each use. • Securely fasten the seat belt [...]

CONTROLS 18 This operator’s manual describes the Husqvarna Zero T urn Rider . The rider is fitted with a Kohler or Kawasaki four -stroke overhead valve engine. T ransmission from the engine is made via belt-driven hydraulic pumps. Using the left and right steering controls, the flow is r egulated and thereby the direction and speed. Control Loc[...]

CONTROLS 19 Motion Control Levers The machine’s speed and direction ar e continuously variable using the two steering controls. The steering controls can be moved forwar d or backward about a neutral position. Further more, ther e is a neutral position, which is locked if the steering controls ar e moved outward. When both controls ar e in the ne[...]

CONTROLS 20 Blade Switch T o engage the mower deck, pull the blade switch knob out. The mower blades are disengaged when the knob is pressed down fully . 8065-004 Blade s witch Parking Brake The parking brake is found on the left of the machine. Pull the lever backward to activate the brake and forward to r elease it. IMPORT ANT INFORMA TION The ma[...]

CONTROLS 21 8065-059 Ignition s witch - R UN position Release the key to the RUN position when the engine has started. For using ACCESSOR Y , turn the key clockwise. 8065-057 Ignition s witch - accessor y Ignition Switch The ignition key is placed on the control panel and is used to start and stop the engine. T ur n the key clockwise to start the e[...]

CONTROLS 22 8065-004 Choke control Choke Control The choke control is used for cold starts in order to provide the engine with a richer fuel mixtur e. For cold starts the control should be pulled up. Fuses Fuses are located on the right hand side of the machine. They are accessed by tilting the seat forward. Fuses ar e flat pin fuses type as used [...]

CONTROLS 23 1 2 Cutting Height Pedals The cutting height pedals release the deck lift to allow setting the desired deck height. Apply pr essure to the lift pedal and rotate foot to also apply pr essure to the release pedal, unlocking the deck lift. For transport, push the lift pedal fully forward until the deck lift latches in the transport (highes[...]

CONTROLS 24 IMPORT ANT INFORMA TION Seat should not be adjusted while unit is in motion. Seat Adjustment Lever The seat can be adjusted lengthways. The lever is located at the right side of the seat (as seen by the driver in the seat). When making adjustments the lever is moved to the left or upward depending on model. 8065-009 Lengthwa ys adjustme[...]

CONTROLS 25 IMPORT ANT INFORMA TION Experience indicates that alcohol blended fuels (called gasohol, ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. T o avoid engine problems, the fuel system should be emptied before stora[...]

OPERA TION 26 Read the Safety Instructions section and the following pages if you are unfamiliar with the machine. T raining Due to unique steering capabilities, zero turn mowers are far mor e maneuverable than typical riding mowers. This section should be reviewed in its entir ety prior to attempting to move the mower under its own power . When ?[...]

OPERA TION 27 Before Starting 1. Read the sections on Saf ety and Controls before starting the machine. 2. Perfor m the daily maintenance before starting (see Maintenance Schedule in the Maintenance section). 3. Check that there is sufficient fuel in the fuel tank. 4. Make sure that the parking brake is engaged. Roll Bar and Safety Belt Operate th[...]

OPERA TION 28 Starting the Engine 1. Sit on the seat. 2. Raise the mower deck to the transport position by setting the lift pedals fully forward. 3. Activate the parking brake. 4. Disengage the mower blades by pressing the blade switch downwards. 8065-004 Press the control f or disengaging the mower dec k 8065-017 Set mower dec k to the transpor t [...]

OPERA TION 29 5. Move the steering controls outwar d to the locked (outer) neutral position. 8065-018 Place controls in neutral position 7. If the engine is cold, the choke control should be pulled up. 8065-015 Set the choke control 6. Move the throttle to the middle position. 8065-019 Set the throttle[...]

OPERA TION 30 9. Press in and turn the ignition key to the start position. 10. When the engine starts, immediately release the ignition key back to the run position. Push the choke control in gradually when the engine has started. IMPORT ANT INFORMA TION Do not run the starter for more than 5 seconds each time. If the engine does not start, wait ab[...]

OPERA TION 31 11. Set the engine speed with the throttle. Allow the engine to run at a moderate speed, approximately mid throttle, for 3-5 minutes befor e loading it too heavily . USE FULL THROTTLE WHEN MOWING (no choke). W ARNING! Engine exhaust and certain vehicle components contain or emit chemicals considered to cause cancer , birth defects or [...]

OPERA TION 32 Weak Battery If the battery is too weak to star t the engine, it should be recharged. (See Battery in the Maintenance section.) Jumper Cables Use 1. Connect each end of the RED cable to the POSITIVE (+) terminal on each batter y , taking care not to short against chassis. 2. Connect one end of the BLACK cable to the NEGA TIVE (-) term[...]

OPERA TION 33 Running 1. Release the parking brake by moving the lever downward. NOTE: The mower is equipped with an operator presence system. When the engine is running, any attempt by the operator to leave the seat without first setting the parking brake will shut off the engine. 2. Move the steering controls inwar ds, out of the neutral positio[...]

OPERA TION 34 Operating on Hills Read the Safety Instructions Driving on Slopes in the Saf ety Instructions . W ARNING! Do not drive up or down hills with slopes greater than 10 degrees. Do not drive across slopes. 8065-018 Place controls in neutral position 8065-006 Release the parking brake • The slowest speed possible should be used before sta[...]

OPERA TION 35 8011-603b Mowing pattern Mowing Tips • Observe and flag rocks and other fixed objects to avoid collisions. • Begin with a high cutting height and reduce it until the desired mowing r esult is attained. The average lawn should be cut to 2½" (64 mm) during the cool season and over 3" (76 mm) during the hot months. For h[...]

OPERA TION 36 IMPORT ANT INFORMA TION Leaving the ignition switch in any other position than OFF will cause the battery to be discharged. Stopping the Engine 1. Move the throttle to the minimum position (tortoise symbol).pressing the blade switch. 2. Move the steering controls outwar d to the neutral position. 3. Disengage the mower deck by depress[...]

OPERA TION 37 W ARNING! No adjustments or maintenance should be carried out unless: • the engine stopped • the ignition key removed • the parking brake activated Moving Machine By Hand Bypass V alves Bypass valves are used to r elease the system so the machine may be moved by hand when not running. IMPORT ANT INFORMA TION Tighten the valve mo[...]

MAINTENANCE 38 1) First change after 8-10 hours. When operating with a heavy load or at high ambient temperatures, r eplace every 50 hours. 2) In dusty conditions, cleaning and replacement ar e requir ed more often. 3) Performed by authorized service workshop. ● = Described in this manual ♦ = Not described in this manual ■ = Refer to the engi[...]

MAINTENANCE 39 1) First change after 5-8 hours. When operating with a heavy load or at high ambient temperatures, r eplace every 50 hours. 2) In dusty conditions, cleaning and replacement ar e requir ed more often. 3) Performed by authorized service workshop. ● = Described in this manual ♦ = Not described in this manual ■ = Refer to the engin[...]

MAINTENANCE 40 1 2 Battery The mower is equipped with a maintenance free battery and does not need servicing. However , periodic charging of the battery with an automotive type battery charger will extend its life. • Keep battery and ter minals clean. • Keep battery bolts tight. • See chart for charging times. IMPORT ANT INFORMA TION Do not a[...]

MAINTENANCE 41 Safety System This machine is equipped with a safety system that prevents starting or driving under the following conditions. The engine can only be started when: 1. The mower deck is disengaged. 2. The steering controls ar e in the outer , locked neutral position. 3. The parking brake is on. Make daily inspections to ensure that the[...]

MAINTENANCE 42 1 2 1¾" Parking Brake Visually check that no damage is found on the lever , links, or switch belonging to the parking brake. Perfor m a standstill test and check that there is sufficient braking action. IMPORT ANT INFORMA TION The machine must be standing still when applying the parking brake. 8065-006 P ar king brake W ARNING[...]

MAINTENANCE 43 A C B D 1 / 8 "-¼" gap with park brake engaged 8065-052 P ar king brake adjustment 5. If adjustments are needed, loosen B jam nut and turn A jam nut until the correct distance is achieved. Retighten B jam nuts against A jam nuts. 6. Engage the park brake. Measure the distance between the D brake bolt and the brake swivel. [...]

MAINTENANCE 44 8065-040 Release the belt tension Deck Belt Deck Belt Removal Park on a level surface. Apply park brake. Lower the deck into the lowest cutting position. 1. Remove foot plate and belt shields. 2. Remove any dirt or grass that may have accumulated around the cutter housings and entire deck surface. 3. With a ½" breaker bar and u[...]

MAINTENANCE 45 1 2 3 Pump Belt The belts are not adjustable. Replace belts if they begin to slip from wear . Replacing Pump Belt Park the mower on a level surface. Engage the parking brake. Belt Removal 1. Remove the deck belt (see Deck Belt Remo val in this section of the manual). 2. Remove clutch stop to access the belt. 3. Disconnect clutch wire[...]

MAINTENANCE 46 2 3 1 IMPORT ANT INFORMA TION The sharpening of blades should be carried out by an authorized service workshop. Cutting Blades T o attain the best mowing effect, it is important that blades are well sharpened and not damaged. Replace blades that have been bent or cracked when hitting obstacles. Let the service workshop decide whether[...]

MAINTENANCE 47 2 1 Adjusting the Mower Deck Leveling Deck Adjust the deck while the mower is on a level surface. Make sure the tires ar e inflated to the correct pressur e. See Tire Pressures in Maintenance section. If tires ar e under or over inflated, the deck cannot be properly adjusted. Faulty mower deck adjustments will cause an uneven mowin[...]

MAINTENANCE 48 2 1 Anti-scalp Rollers Anti-scalp rollers keep the deck in the pr oper position to help prevent scalping in most terrain conditions. Do not adjust the rollers to support the deck. IMPORT ANT INFORMA TION Adjust anti-scalp rollers with the mower on a flat level surface. T o avoid deck damage, the anti-scalp rollers must not be adjust[...]

MAINTENANCE 49 Use protective glasses when cleaning and washing. Cleaning Regular cleaning and washing, especially under the mower deck, will increase the machine’s life-span. Make it a habit to clean the machine directly after use (after it is cooled), before the dirt sticks. Do not spray water on the top of the mower deck. Use compressed air to[...]

50 LUBRICA TION 50 12/12 Every year 1/52 Every Week 1/365 Every day Lubricate with grease gun Oil change Filter change Level check 8065-031 Lubrication Schedule General Remove the ignition key to prevent unintentional movements during lubrication. When lubricating with an oil can, it must be filled with engine oil. When lubricating with gr ease, u[...]

51 LUBRICA TION 51 Wheel and Deck Zerks Use only good quality bearing grease. Grease fr om well-known brand names (petrochemical companies, etc.) usually maintains a good quality . Front Wheel Mount Remove dust cap to expose zerk. Lubricate with a grease gun until the gr ease is forced out around the top washer . Front Wheel Bearings Lubricate 3-4 [...]

52 LUBRICA TION 52 1 3 2 8065-036 1. Pump filter 2. Oil reservoir 3. Drain port Changing the h ydraulic pump oil and filter Hydraulic Drive Fluid and Filter Change The hydraulic drive is designed with an external filter for ease of maintenance. T o ensure constant fluid quality levels and longer life, an oil filter change interval of every 500[...]

53 LUBRICA TION 53 T ransmission Purging Procedures Due to the effects air has on efficiency in hydr ostatic drive applications, it is critical to purge the system. These purge procedur es should be implemented any time a hydrostatic system has been opened to facilitate maintenance or any additional oil has been added to the system. Resulting symp[...]

TROUBLESHOOTING 54 Problem Cause Engine will not start • Blade switch is engaged. • Steering controls ar e not locked in the neutral position • Parking brake is not activated • Battery is dead • Contamination in the carburetor or fuel line. • Fuel supply is closed or the shutoff valve for the fuel tank is in the wrong position • Clogg[...]

TROUBLESHOOTING 55 Problem Cause Engine overheats • Clogged air intake or cooling fins • Engine overloaded • Poor ventilation around engine • Defective engine speed regulator • T oo little or no oil in the engine • Contamination in the carburetor or fuel line. • Fouled spark plugs Battery not charging • Poor contact of the battery [...]

ST ORAGE 56 Winter Storage The machine should be readied for storage at the end of the mowing season or if it will not be in use for longer than 30 days. Fuel allowed to stand for long periods of time (30 days or more) can leave sticky r esidues that can plug the carburetor and disrupt engine function. Fuel stabilizers are an acceptable option as r[...]

WIRING DIAGRAM 57 TIMER SCHEMA TIC[...]

TECHNICAL DA T A 58 PZ6034FX PZ7234FX, PZ34FX BF Engine Manufacturer Kawasaki Kawasaki T ype FX921 FX921 Power 31 HP* 31 HP* Lubrication Pressur e w/ Oil Filter Pressure w/ Oil Filter Fuel Min 87 octane unleaded (Max ethyl alcohol 10%, Max MTBE 15%) Min 87 octane unleaded (Max ethyl alcohol 10%, Max MTBE 15%) Fuel tanks capacity 11 gallons / 41.6 l[...]

TECHNICAL DA T A 59 PZ6034FX PZ7234FX, PZ34FX BF Frame Cutting Width 60" (152.4 cm) 72" (183 cm) Cutting Height 1"-5" (2.5-12.7 cm) 1"-5" (2.5-12.7 cm) Uncut Circle 0 0 Number of Blades 3 3 Blade Length 21" / 53.3 cm 25" / 63.5 cm Nose Rollers Ye s Ye s Antii-scalp Rollers 4 adjustable 6 adjustable Sprung Sea[...]

TECHNICAL DA T A 60 Engine crankshaft bolt 50 ft/lb (67 Nm) Deck pulley bolts 150 ft/lb (203 Nm) Lug nuts 75 ft/lb (100 Nm) Blade bolt 90 ft/lb (122 Nm) Standard ¼" fasteners 9 ft/lb (12 Nm) Standard 5 / 16 " fasteners 18 ft/lb (25 Nm) Standard 3 / 8 " fasteners 33 ft/lb (44 Nm) Standard 7 / 16 " fasteners 52 ft/lb (70 Nm) Stan[...]

CONFORMITY CERTIFICA TES 61 USA requirements Labels are placed on the engine and/or in the engine compartment stating that the machine will fulfill the requir ements. This is also applicable to special requir ements for any of the states, (Califor nia emission rules etc.). Do not remove any of these labels. Certificates can also be supplied with [...]

SER VICE JOURNAL Action Date, mtr reading, stamp, sign 62 Delivery Service Charge and connect the battery . ¨ Adjust the tire pr essure of all wheels to 15 PSI (1 bar). ¨ Connect the contact box to the cable for the seat’s safety switch. ¨ Check hydraulic oil level. ¨ Check hydraulic hoses for kinking or leaks. ¨ Check neutral position. ¨ F[...]

SER VICE JOURNAL Action Date, mtr reading, stamp, sign 63 After 10 hours Change the engine oil. ¨ Change the oil filter . ¨ Check hydraulic oil level. ¨ Inspect hydraulic hoses. ¨ Inspect hydraulic belt ¨ Inspect hydraulic filter . ¨ Check neutral position. ¨ Check safety system. ¨ Check seat belt. ¨ Check ROPS. ¨ Check fuel system for [...]

SER VICE JOURNAL Action Date, mtr reading, stamp, sign 64 Daily Service Clean debris from mower . ¨ Check engine oil level. ¨ Check the tire pr essures. ¨ Check underside of deck. ¨ Inspect deck pulleys. ¨ Check/clean the engine’s cooling air intake. ¨ Check safety system. ¨ Check seat belt. ¨ Check ROPS. ¨ Check fuel system for leaks. ?[...]

SER VICE JOURNAL Action Date, mtr reading, stamp, sign 65 50-Hour Service Clean debris from mower . ¨ Check engine oil level. ¨ Check the tire pr essures. ¨ Check underside of deck. ¨ Inspect deck pulleys. ¨ Check/clean the engine’s cooling air intake. ¨ Check safety system. ¨ Check seat belt. ¨ Check ROPS. ¨ Check fuel system for leaks.[...]

SER VICE JOURNAL Action Date, mtr reading, stamp, sign 66 250-Hour Service Grease fittings (caster pivots and caster wheels) ¨ Inspect dampers ¨ Inspect frame ¨ Inspect throttle and choke cables ¨ Inspect hardwar e ¨ Check the tire pr essures ¨ Change the engine oil and filter ¨ Change air filter ¨ Inspect spark plug ¨ Inspect fuel fil[...]

SER VICE JOURNAL Action Date, mtr reading, stamp, sign 67 500-Hour Service Grease fittings (caster pivots and caster wheels) ¨ Inspect dampers ¨ Inspect frame ¨ Inspect throttle and choke cables ¨ Inspect hardwar e ¨ Check the tire pr essures ¨ Change the engine oil and filter ¨ Change air filter ¨ Inspect spark plug ¨ Inspect fuel fil[...]

SER VICE JOURNAL Action Date, mtr reading, stamp, sign 68 At Least Once Each Y ear Clean the engine’s cooling air intake. ¨ Replace the air cleaner’s pre-filter (foam). ¨ Replace the air filter’s paper cartridge. ¨ Change the engine oil. ¨ Replace the engine oil filter ¨ Check/adjust the cutting height ¨ Check/adjust the parking brak[...]

SER VICE JOURNAL Action Date, mtr reading, stamp, sign 69[...]

SER VICE JOURNAL Action Date, mtr reading, stamp, sign 70[...]

[...]

www .husqvarna.com 1 15 461927 Rev A 201 1-10-20[...]