IBM M71V2 manuale d’uso

M71V2 W ireless Handheld Terminal © 2008 American Microsystems LTD. Effective Date: February 2008 User’s Guide AML Website: www.amltd.com[...]

M71V2 HANDHELD TERMI NAL User’s Guide Disclaimer American Microsystems, Ltd. reserves the right to make cha nges in specifications and other information contained in this document without prior notice, and the reader should in all cases consult American Microsystems, Ltd. to determine whether any such changes have been made. The information in th[...]

T ABLE OF CONTENTS INTRODUCING THE M71V 2 1 What to Expect 1 Warranty 2 General Conventions 2 M71V2 TERMINAL OVERV IEW 3 Using the M71V2 Keyboard 3 Key Values 4 The M71V2 Display Screen 6 The M71V2 Scanner 6 The M71V2 Scanner LED 10 Scanner information and Labeling 11 The M71V2 Internal Radio 13 802.11b Fallback Mode 13 Interference and Coexistence[...]

Decoder Options 80 Local Settings, 2D Imager Only 82 Barcode Options 82 Symbology Settings 82 Setting the Code 39 Bar Co de 83 Setting the PDF417 Bar Code 84 Setting the MicroPDF417 Bar Code 85 Setting the RSS Bar Code 85 Setting the Composite Bar Code 86 Setting the UPC - A Bar Code 87 Setting the UPC - E Bar Code 88 Setting the EAN/JAN - 13 Bar C[...]

GETTING STARTED 1 Introducing the M 71V2 This chapter describes how to get started using your M71V2 handheld terminal and get you up and running fast. he M71V2 handheld terminal is an ultra - versatile, high - performance, designed - to - fit - your - budget terminal. The ergonomic design easily fits in even the smallest of hands. It is rugged, lig[...]

GETTING STARTED 2 • Connect to your host computer • Customize your M71V2 Terminal • Create and execute programs • Collect and upload data • Send and receive data • Connect and use the M71V2 serial interface Warranty A one - yea r warranty against material defects and workmanship from the date of shipment is guaranteed by American Micros[...]

3 M71V2 Te rminal Ove rview This chapter describes the features o f the M71V2 terminal. o save time in the future, print a copy of this document. Choose Print from the File menu, and press Enter to recei ve all the pages of examples and instructions. Using the M71V2 Keyboard The M71V2 Terminal is equipped with fifty - five keys that are divided int[...]

4 the blue Function menu or the blue special characters. Function keys (F1 – F20) can be prog rammed by many host systems, to be “hot keys” and select specific program items without navigating the entire program. The black [Shift] key toggles between upper and lower case mode and selects special characters on the numeric keypad. There are ten[...]

5 6 (Down a rrow) Moves the display screen down one line at a time or moves the display screen down one menu level. In terminal emulation, the <Shift> then < 6 > will move the screen up one whole page. 4 (Right arrow) Moves the cursor right one character at a time and toggles between menu selection options. In terminal emulation, the &l[...]

6 The M71V2 Display Screen The M71V2 handheld terminal includes a 160 pixel by 160 pixel grayscale graphical Liquid Crystal Display (LCD). Programs can be written which mix te xt and graphics together on the display. Warning: This display is NOT a touch screen display and the operator should not use sharp objects on the plastic window protecting th[...]

7 Advanced Long Range Laser (ALR) The Advanced Long Range laser engine uses a moving l aser light with a highly sensitive laser detector. The advanced long range laser is able to read farther than the standard long range laser. The advanced long range laser also includes a laser point (dot) feature. Scan Rate: 35 ( ± 5) Scans / Second Scan A ngle:[...]

8 Reading distance for the Standard High Speed Laser[...]

9 Reading distance for the Long Range Laser Reading dis tance for the Advanced Long Range Laser[...]

10 Reading distance for the 2D Area Imager Barcode symbologies are always measured in mils. This usually refers to the narrowest bar width. One mil equals 0.001”, therefore a 0.01” wide narrow bar would be a 10 mil b arcode. Conversion: 1 mil = 0.0254 mm 1 inch = 25.4 mm These charts show typical performance at 68 °F on high quality bar code s[...]

11 Scanner information and Labeling The M71V2 Integrated Laser Scanner uses a low - power visible laser diode. Avoid staring directly into the light beam. Mom entary exposure to a CDRH Class II laser is not known to be harmful. Laser Classification: CDRH Class II Light Source: 630 – 680 nm laser diode Laser Output Power: 1.0 milliwatt maximum out[...]

12[...]

13 The M71V2 Internal Radio The M71V2 Handheld Terminal comes equipped with an internal 802.11b radio and antenna. This internal radio is specifically designed to communicate with any 802.11b Access Point. The range of the internal radio depends greatly on the quality of the Access Point and the RF communications characteristic of the environment w[...]

20 The Optional M71V2 Handle The M71V2 has an optional “pistol grip” style handle for users who prefer the point and shoot style. The M71V2 handle is secured to the M71V2 handheld terminal by 4 screws. The battery is then relocated in the handle for easy change - out. Installing the Optional M71V2 Handle To install the M71V2 handle, remove the [...]

21 The M71V2 Communications Ports The M71V2 has three types of communications ports on the bottom of the unit. The three ports are shown here. Description of the Infra - Red Detector Array Port (IrDA) 1. IrDA in (right side of window) 2. IrDA out (left side of window) Description of the RJ - 45 10 Pin Connector (RS - 232) 1. 5 VDC (out to handheld [...]

22 The M71V2 Cradle The M71V2 Handheld Terminal has available, an optional charging and communications cradle. The cradle automatically charges the M71V2 battery while it is resting in the cradle. The cradle also includes an extra slot to charge a spare battery. The M71V2 cradle can accommodate the M71V2 with or without the optional M71V2 handle. T[...]

23 The M71V2 Cradle’s Communication Ports The M71V2 handheld terminal has 2 different styles of communications ports, RS - 232 (RJ - 45) and USB (Ty pe II). The M71V2 Cradle also has 2 communications ports, RS - 232 (DB - 9) and USB (Type II). The M71V2 Communications Cradle uses a standard RS - 232 (DB - 9 Male – DB - 9 Female) cable. Both com[...]

24 The M71V2 RF Se rver Login This chapter describes th e login functions o f the M71V2 terminal. It also describes using Telnet and Terminal Emulation support. arning: If the M71V2 Handheld Terminal has improper security and/or network settings, the terminal will fail to connect to any network devices. For he lp see the Network Settings section of[...]

25 If there is not a wireless Access Point (AP) for the handheld terminal to connect to, then the terminal will not proceed past this point. For help in determining the presence and strength of an Access Point’s transmission see the Network Diagnostics section of this manual. Connecting The following screen shows the M71V2 handheld terminal conne[...]

26 Applications If you are using the CommandLink™ software, and the proper User ID and Password are entered, then the Applications Menu is displayed. These are the programs that are available on the CommandLink™ Server for this user. Other users may see other programs depending on the settings in the CommandLink™ Administrator. Additional pro[...]

27 Console 2: Communications Session or User Program Console 3: Battery Warnings Console 4: Second Telnet Session Console 5: Linux prompt Console 6: User Defined Console 7: RESERVED Console 8: User Defined Console 9: RESERVED Each virtual console is running a different foreground application that uses the entire screen. The keyboard is attached to [...]

28 The M71V2 has a built - in feature which makes it easy to see when the terminal is out of range of an access point. When the M71V2 goes outside of RF coverage, the following screen appears. When the operator goes back into RF coverage, the “Out of Range” screen will automaticall y disappear and return the operator to where they left off. Thi[...]

29 The M71V2 Menu System This chapter describes the Main Menu functions o f the M71V2 Handheld Terminal. Main Menu ou may access the menu system by pressing the [Menu] key on the M71V2 handheld terminal. The menu screens pop - up in front of the currentl y displayed screen. Only the items in the menu screens are active when the menu items are displ[...]

30 Contrast The contrast can be set by selection the “Contrast” function from the Main Menu. The 3 (left) and 4 (right) arrow keys can be used to fine - tune the contrast. The scroll bar below the Main Menu window shows the current contrast level. The [ENTER] key will save the changes to the permanent flash memory and [ESC] will abandon chan ge[...]

31 Network Setup By selecting the Network Setup function from the Main Menu the wireless network adapter can be configured. The “Network Connection Info” dialog box displays the RF Status (RF) the curr ent IP Address (IP), Network Mask (MASK) and the MAC Address (MAC) of the wireless Ethernet card that is installed in the M71V2. The RF Status i[...]

32 Note: Enabling DHCP or BOOTP will cause the M71V2 handheld terminal to take slightly longer to establish a connection to the RF network due to the ov erhead involved in obtaining network information from the server. Radio Settings (WEP) The Radio Settings allows the operator to set wireless network security settings. The first radio setting is S[...]

33 In the example above, “AMLBURNIN” was chosen for the unique SSID name. Your unique name should be assigned by your local Systems Administrator. The wireless security settings are referred to as WEP (Wireless Equivalent Privacy ) can be left un - enabled or can be enabled fro m this menu . It is HIGHLY recommended that some sort of WEP standa[...]

34 To modify an encryption key set simply highlight the appropriate key set. Note that the number of key pairs will change depending on which encryption format you are using. Note: Some manufacturers will call their 40 bit encryption 64 bit encryption or call their 128 bit encryption 160 bit encryption; in any case they are the same settings. Also [...]

35 The Auth setting determines what type of network system you are using. These two modes simply define how the above key sets will be used to encrypt the data sent over the radio. Whic hever mode is selected, the access point MUST be set to the same mode for communications to take place. The Power Save setting will force the radio card to turn off[...]

36 Radio Settings (W PA - PSK) The M71V2 supports both WPA - PSK (Pre - Shared Key) and WPA - EAP (Extensible Authentication Protocol). The WPA - PSK offers TKIP mode or AES - CCMP mode. The mode used must match the network the M71V2 is to communicate with. The Shared Phrase must match the network the M71V2 is to communicate with. The Power Save se[...]

37 Radio Settings (W PA - EAP) The WPA - EAP offers PEAP, TLS and TTLS mode. The mode used must match the network the M71V2 is to communicate with . The Shared Phrase must match the network the M71V2 is to communicate with. The Username must match the network the M71V2 is to communicate with. The Passwd must match the network the M71V2 is to commun[...]

38 Certificate Settings TLS When using TLS you must store the proper certificates onto the M71V2 handheld terminal. The Certif icates and Shared Phrase must match the network the M71V2 is to communicate with. Certificates can be generated from most web browsers such as Mozilla or IE. Establish a connection to your Certificate Authority and download[...]

39 Host Server List The Connection Settings determine how the M71V2 Handh eld terminal will communicate to a host server over the RF network. When the M71V2 Handheld terminal first powers up, it tries to establish a connection to an RF network. If this is successful, it will then start a Telnet session using the settings describ ed in this section.[...]

40 The firs t session is on virtual console 2 and can be accessed by pressing [Alt] then [Func] then [2]. The second session is on virtual console 4 and can be accessed by pressing [Alt] then [Func] then [4]. Multiple Hosts If multiple host have been defined, and a us er wishes to select a different host, then the user would hit the Menu key then R[...]

41 Hosts Log - in Options For each host server listed, you can add special options to make logging into the hosts easier. While this feature makes it easy to log - in to a server, it also makes the server less secure. The information entered in this screen is unique to each host system and must be supplied by the local systems administrator. In thi[...]

42 Te rminal Options The Term setting determines what te rminal type the M71V2 will emulate. The default setting is standard “VT100”. If you are using CommandLink™ software, set the Terminal type to “amlterm”. Note: When using amlterm with CommandLink™ the optional features are controlled by the CommandLink™ server and are not selecta[...]

43 Te rminal Emulation – vt 100 / vt220 The “vt100” terminal emulation is typically used for older server applications that do not support vt220 terminal emulation. It is recommended that the “vt220” emulation be used when possible. If a different term inal type is selected, then the optional features for that emulation are displayed. The[...]

44 The “Legacy” font is specifically designed for legacy applica tions where the screen size has been designed to work on a 16 row by 21 column screen size. Many older terminals were designed with this screen size only. When using Terminal Emulation you can not mix different size fonts on the same terminal screen . If the Disable Scrolling chec[...]

45 When scrolling is disabled by un - checking the "Disable Scrolling" option, two screen location options are available. "Screen Loc x" and Screen Loc y" set the position of the M71V2 viewable area relative to the upper left hand corner of the virtual tn5250 24x80 screen. This allows the user to "lo ck" the locat[...]

46 The Col Shift function determines how many columns the display will move each time the Shift <arrow> keys are used. This allows the operator to “pan around” the currently displayed screen. Use the left 3 and 4 right arrow keys to cha nge this setting. The Row Shift function determines how many rows the display will move each time the S[...]

47 Note that we have “scrolled” down to the bottom of the screen and do not have the Virtual 24x80 function selected. The Wraparound function tells the terminal to “wrap” long text strings onto multiple lines on the M71V 2 screen. This can be very confusing when the data was originally formatted for a 24x80 text screen. This option is unche[...]

48 The Parse `` as Esc function is for certain Windows servers that can not accept the Esc key sequences. If this box is checked, the M71V2 will sen d `` instead of Esc for these sequences. The ENQ: function will allow the M71V2 to respond with a specific ENQ Answerback String whenever the host sends the unit an ENQ command. This string can be anyt[...]

49 The Map Ins as dash function allows for a quick way to insert a dash character ( - ) instead of the rarely used [Ins] key function. This is useful for quickly typing part numbers that inclu de the dash character (e.g. 123 - 456 - 789). The F5: function tells the M71V2 what character string to send back to the host when the F5 key is pressed. Som[...]

50 The Null Padding function is required on most server systems that use the traditional vt100 and vt220 emulations. The null padding can cause an error on some Win dows based servers. If you are experiencing problems with a Window’s based Terminal Emulation server, try un - checking the null padding option. Function Key remapping allows the user[...]

51 The string shown here will send a “ !#EOJ ” followed by a carriage return to the host computer system, when the F6 key is pressed. The n character string sends the new line (linefeed) character and is not shown above. The r character string sends a Carriage Return command and is after the string shown above. In order to send a single bac[...]

52 Te rminal Emulation – tn5250 The “tn52550” terminal emulation is typically used for IBM AS/400 server applicatio ns. The AML tn5250 TE is designed to be a basic 5250 emulation. If optional features are required, it is recommended that either the Connect PowerNet TwinClient emulations or the Stay Linked emulation be used. If a different ter[...]

53 The Legacy font is specifically designed for legacy applications where the screen size has be en designed to work on a 16 row by 21 column screen size. Many older terminals were designed with this screen size only. When using Terminal Emulation you can not mix different size fonts on the same terminal screen. The Auto Reset on Err function r ese[...]

54 The Disable Scrolling locks the cur sor to the upper left screen location. If Disable Scrolling is not checked then you can set the Follow Cursor function which moves the cursor to the current input field. The Col Shift function determines how many columns the display will move each time t he Shift <arrow> keys are used. This allows the op[...]

55 The Display Name function allows the user to program a specific terminal name. This name is then transferred to the host when the terminal logs onto the system. If you do not save your settings they will be lost when you exit the Network Settings screen. The terminal options will only be made permanent if you do a Save Settings, otherwise they a[...]

56 The <Restart Network> function allows the new network to be restarted with all the new settings made i n the above menus. If an active host server is found, the M71V2 will display the log - in screen of that server. If the host server can not be found, the M71V2 Menu System will continue to be displayed. Power Management The “Power M ana[...]

57 When the M71V2 goes into Sleep Mode, it turns off the internal radio card. On some host systems, this causes the current telnet session to be closed. Many users find it better to set the Sleep Timer to zero to prevent closed connections. Note: The power key wake - up feature is only available on units with Decoder version 2.0 or later. The Decod[...]

58 Diagnostics The “Dia gnostic Menu” has several powerful functions that can help pinpoint a variety of network problems. The Diagnostic menu can be used to determine connectivity to the network as well as connectivity to the server or host computer. Network Status The “Network Status” function allows the operator to test the Network Conne[...]

59 The “WLAN:” shows the current connection status reported by the internal RF card. This status can be a very use ful tool to determine if an RF connection is being made. The description of this status is shown below: Disabled This normally means that either the network settings are being changed or the RF card is malfunctioning or not making [...]

60 The “RF Strength” function can be used to test the RF coverage of a wireless RF local area network. Simply put the M71V2 handheld terminal in “RF Strength” mode and walk in the area you want to have RF coverage, and you can quickly see areas with poor RF coverage. Note that this is a very bad connection! This unit is connected to the Acc[...]

61 Resource In formation The “Resource Information” function shows the memory usage and CPU allocation at the current time. The above display shows 72% of the virtual disk memory used, 52% of the Journaling File System (user) memory used and 95% of the static RAM memory used. The Linux operating system uses as much of the free static RAM as pos[...]

62 The “Ping Status” screen will show the M71V2 handheld terminal trying to contact the listed IP Address. Once the connection is made the M71V2 Handheld Terminal will continuously send p ackets of data to time the connection speed in milliseconds (ms). The “Ping Status ” screen will display the results of the ping process. If the M71V2 han[...]

63 Print Test Label The “Print Test Label” function allows the operator test a serial or Ir DA (Infrared Diode Array) printer through the serial or IrDA port on the bottom of the M71V2 handheld terminal. There are two types of printers supported in the “Print Test Label” sub - menu function. The M71V2 does support almost any type of serial [...]

64 Firmware Version The “Firmware Version” function displays the information about the M71V2 handheld terminals firmware version and the date a nd time it was created. Serial Number The “Serial Number” function displays the information about the M71V2 handheld terminals serial number if your unit supports this function. Battery Status The ?[...]

65 When the M71V2 handheld terminal’s battery is completely depleted, a “Battery Low ” error screen is displayed signaling that you must replace the battery or place the unit in the char ger for charging. Barcode Data Viewer The “Barcode Data Viewer” function displays the actual data acquired by the bar code scanner including non - printa[...]

66 Ping USB Server The Ping USB Server function allows you to detect a USB server connected to the USB port. Hardware Tests The Hardwar e Tests function performs tests on the various M71V2 hardware. Note: These hardware tests are for our own internal testing and may, or may not, display as failed for the end user, even though the unit is running fi[...]

67 Local Settings, Laser & CCD Only Note: For instructions on setting the 2D Area Imager see Local Settings, Imager Only. The “Local Settings” function sets much of the M71V2 handheld terminal’s internal hardware and software. Barcode Options The “Barcode Options” function allows you to make changes to the way specific bar codes are s[...]

68 Setting the Code 39 Bar Code The individual bar codes can be enabled and disabled by hitting the [Space] key. Only enabled bar code symbologies can be modified. To modify a bar co de symbology hit the [ENTER] key while the bar code name is highlighted. CODE 39 DECODER ON* Enable reading Code 39 bar codes. OFF Disable reading Code 39 bar codes. F[...]

69 ON Enable Concatenate Mode. The concatenate mode allows the M71V2 handheld terminal to accum ulate multiple bar codes in its buffer and then sends them to the computer just like they were a single bar code. When a Code 39 label containing a leading space is read, the M71V2 emits two short beeps and buffers the data without transmission. This pro[...]

70 ON* Transmit the UPC - A Number System character. OFF Do not transmit the UPC - A Number Sys tem character. SEND UPC - E NUMBER SYSTEM ON* Transmit the UPC - E Number System character. OFF Do not transmit the UPC - E Number System character. SEND UPC - A CHECK DIGIT ON* Transmit the UPC - A Check Digit character. OFF Do not transmit the UPC - A [...]

71 SEND EAN - 13 COUNTRY CODE ON* Transmit the EAN - 13 Country Code. OFF Do not transmit the EAN - 13 Country Code. SEND EAN - 8 COUNTRY CODE ON* Transmit the EAN - 8 Country Code. OFF Do not transmit the EAN - 8 Country Code. SEND EAN - 13 CHECK DIGIT ON* Transmit the EAN - 13 Check Digit character. OFF Do not transmit the EAN - 13 Check Digit ch[...]

72 OFF* Disable reading UPC, EAN & Bookland supplements. ALLOW 2 DIGIT ON* Enable reading 2 digit supplements. Option 0) above must be set on. OFF Disable reading 2 digit supplements. ALLOW 5 DIGIT ON* En able reading 5 digit supplements. Option 0) above must be set on. OFF Disable reading 5 digit supplements. REQUIRE UPC SUPPLEMENTS ON* Enable[...]

73 Setting the I - 2 of 5 Bar Code INT 2 OF 5 DECO DER ON* Enable reading Interleaved 2 of 5 bar codes. OFF Disable reading Interleaved 2 of 5 bar codes. USS CHECK DIGIT Specifies if the USS check digit type will be used with Interleaved 2 of 5: ON Uniform Symbology Specification (3 - 1 - 3 mod 10) OFF* Non e (no check digit required) OPCC CHECK DI[...]

74 OFF* Disable Fixed Length mode. Read all Interleaved 2 of 5 labels without regard to length. SET FIXED LENGTH #1 (02 - 60) Sets the first valid Fixed Length for Interleaved 2 of 5. Enter a two - digit value to enter the length. Valid lengths are 02 to 60 characters. By definition, the lengths of Interleaved 2 of 5 labels are an even number of ch[...]

75 ON The reader will insert a blank after the 1st, 5th, and 10th characters of a 14 - character Codabar label. The label length does not include the start and stop characters. OFF * Disable CLSI formatting. CLSI CHECK DIGIT ON Enable the CLSI check digit. When this option is enabled, all fourteen digit numeric bar codes must contain a valid check [...]

76 Setting the Code 93 Bar Co de CODE 93 DECODER ON* Enable reading Code 93 bar codes. OFF Disable reading Code 93 bar codes. CONCATENATE MODE ON Enable Concatenate Mode. The concatenate mode allows the reader to concatenate multiple bar co des in its buffer, and then sends them to the computer just like they were a single bar code. When a Code 93 [...]

77 MSI/PLESSEY DECODER ON Enable reading MSI/Plessey bar codes. OFF * Disable reading MSI/Plessey bar codes. TWO CHECK DIGITS REQUIRED ON Two valid check digits are required for each label. The first check digit is de fined by option 2) below. The second check digit is always mod 10. OFF * One valid check digit is required for each label. The check[...]

78 Setting the Code 11 Bar Code CODE 11 DECODER ON Enable reading Code 11 ba r codes. OFF * Disable reading Code 11 bar codes. TWO CHECK DIGITS REQUIRED ON Two valid check digits are required for each label. OFF * One valid check digit is required for each label. SEND FIRST CHECK DIGIT ON Transmit the First Check Digit. OFF * Do not transmit the Fi[...]

79 The RSS bar code is turned of f by default to prevent any confusion with the Interleaved 2 of 5 bar codes. An I 2 of 5 bar code can never be interrupted as a RSS bar code but it is remotely possible that an RSS bar code might be incorrectly scanned as an I 2 of 5. It is recommended th at the Interleaved 2 of 5 bar code symbology be disabled when[...]

80 Decoder Options The “Decoder Options” function allows the operator to add termination characters to the bar code as it’s read by the internal scanner. SEND BAR CODE TYPE ID: (ON/OFF) ON: Sends a letter preceding the data, indicating the symbology type of the bar code. The letter corresponds to the types: A - Code 39 B - UPC - A C - UPC - E[...]

81 TERMINATION CHARACTER OVERRIDE (ON/OFF) ON: Strips any termination charact er from the bar code that was scanned. OFF*: Does not strip any termination characters from the bar code. The optional Termination Character is transmitted at the end of the data. None - None Tab - Horizontal Tab CR - Carriage Return CRLF - Carr iage Return & Line Fee[...]

82 Local Settings, 2D Imager Only Note: For instructions on setting the Laser or CCD see: Local Settings, Laser & CCD Only previously in this manual. The “Local Settings” function sets much of the M71V2 handheld terminal’s internal h ardware and software. Barcode Options The “Barcode Options” function allows you to make changes to the[...]

83 The Symbology settings for the 2D Imager are quite extensive and complex. Usually the default settings are satisfactory for most applications. Please refer to t he “HHP® IMAGETEAM™ OEM Engine User’s Guide” for a more technical description of the following symbology settings. Setting the Code 39 Bar Code The individual bar codes can be e[...]

84 Unchecked* Disable the sending of leading or trailing start characters with the bar code. Check Char NONE* Do not validate the ch eck characters and do not send any check characters with the bar code. TEST Validate the check character but do not send it with the bar code. Bar code must be printed with a check character. SEND Validate and send th[...]

85 PDF417 Checked* Enable reading PDF417 bar codes. Unc hecked Disable reading PDF417 bar codes. Length Min Default = 1 The minimum number of characters in the scanned bar code. Length Max Default = 2750 The maximum number of characters in the bar code. Setting the MicroPDF417 Bar Code MicroPDF417 Checked Enable reading MicroPDF417 bar codes. Unche[...]

86 Unchecked Disable reading RSS14 bar codes. RSS Lim. Checked* Enable reading RSS Limited bar codes. Unchecked Disable reading RSS Limited bar codes. RSS Exp. Checked* Enable reading RSS Expanded bar codes. Unchecked Disable reading RSS Expanded bar codes. Length Min Default = 4 The minimum number of characters in the scanned bar code. Length Max [...]

87 Setting the UPC - A Bar Code UPC - A Checked* Enable reading UPC - A bar codes. Unchecked Disable reading UPC - A bar codes. Check Digit Checked* Send the UPC check digit with the bar code. Unchecked Disable the sending of the UPC check digit with the bar code. Num Sys Checked* Send the UPC number system character with the bar code. Unchecke d D[...]

88 Checked* Require the extended coupon code with the bar code. Unchecked Do not require the extended coupon code with the bar code. Setting the UPC - E Bar Code UPC - E0 Che cked* Enable reading UPC - E0 bar codes. Unchecked Disable reading UPC - E0 bar codes. Expand Checked Expand the UPC - E0 bar code to an UPC - A bar code. Unchecked* Do not ex[...]

89 5 Dig Sup Checked Send the 5 digit supplemental character with the bar code. Unchecked* Disable sending the 5 digit supplemental character with the bar code. UPC - E 1 Checked Enable reading UPC - E1 bar codes. Unchecked* Disable reading UPC - E1 bar codes. Setting the EAN/JAN - 13 Bar Code EAN/JAN - 13 Checked* Enable reading EAN/JAN - 13 bar c[...]

90 ISBN Checked Convert 13 digit Bookland/EAN (978) prefix to its corresponding 10 - digit ISBN number. Unchecked* Do not convert B ookland/EAN to an ISBN number. Setting the EAN/JAN - 8 Bar Code EAN/JAN - 8 Checked* Enable reading EAN/JAN - 8 bar codes. Unchecked Disable reading EAN/JAN - 8 bar codes. Check Digit Checked* Send the E AN/JAN - 8 che[...]

91 Setting the 2 of 5(s) Bar Codes Code 2 of 5 Checked Enable reading Code 2 of 5 bar codes. Unchecked* Disable reading Code 2 of 5 bar codes. L ength Min Default = 4 The minimum number of characters in the scanned bar code. Length Max Default = 48 The maximum number of characters in the scanned bar code. Int. Code 2 of 5 Checked* Enable reading In[...]

92 Length Max Default = 48 The maximum number of characters in the scanned bar code. Matrix 2 of 5 Checked Enable reading Matrix 2 of 5 bar codes. Unchecked* Disable reading Matrix 2 of 5 bar codes. Length Min Default = 4 The minimum number of characters in the sca nned bar code. Length Max Default = 48 The maximum number of characters in the scann[...]

93 Setting the Code 128 Bar Code Code 128 Checked* Enable reading Code 128 bar codes. Unchecked Disable reading Code 128 bar codes. ISBT Conc Checked Enable support the use of Internati onal Society of Blood Transfusion (ISBT) symbols. Unchecked* Disable support for the use of ISBT symbols. Length Min Default = 0 The minimum number of characters in[...]

94 Setting the Code 93 Bar Code Code 93 Checked* Enable reading Code 93 bar codes. Unchecked Disable reading Code 93 bar codes. Length Min Default = 0 The minimum number of characters in the scanned bar code. Length Max Default = 80 The maximum number of characters in the scanned bar code. Page Defines the mapping of foreign characters to be insert[...]

95 MSI Checked Enable reading MSI bar codes. Unchecked* Disable reading MSI bar codes. Check Digit Checked Send the MSI check digit with the bar code. Unchecked* Dis able the sending of the MSI check digit with the bar code. Length Min Default = 4 The minimum number of characters in the scanned bar code. Length Max Default = 48 The maximum number o[...]

96 Default = 4 The minimum num ber of characters in the scanned bar code. Length Max Default = 80 The maximum number of characters Setting the Telepen Bar Code Telepen Checked Enable reading Telepen bar codes. Unchecked* Disable reading Telepen bar codes. AIM Output Checked Read start/stop pattern 1 and output standard full ASCII. Unchecked* Read s[...]

97 Unchecked Disable reading PosiCode bar codes. A&B, A&B & Lim A, A&B & Lim B Only one of these options can be s et to ON OFF A and B On, Not Limited. OFF A and B and Limited A On (Limited B Off). ON* A and B and Limited B On (Limited A Off). Length Min Default = 4 The minimum number of characters in the scanned bar code. Lengt[...]

98 Setting the Code 16K Bar Code Code 16K Checked Enable reading Code 16K bar codes. Unchecked* Disable reading Code 16K bar codes. Length Min Default = 1 The minimum number of characters in the scanned bar code. Length Max Default = 160 The maximum number of characters in the scanned bar code. Setting the Code 49 Bar Code Code 49 Checked* Enable r[...]

99 Setting the Aztec Bar Code Azte c Checked* Enable reading Aztec bar codes. Unchecked Disable reading Aztec bar codes. Length Min Default = 1 The minimum number of characters in the scanned bar code. Length Max Default = 3750 The maximum number of characters in the bar code. Aztec Run e Checked Enable Aztec Runes scanning. Unchecked* Disable Azte[...]

100 Length Max Default = 3500 The maximum number of characters in the bar code. Setting the Data Matrix Bar Code Data Matrix Checked* Enable reading Data Matrix bar codes. Unchecked Disable r eading Data Matrix bar codes. Length Min Default = 1 The minimum number of characters in the scanned bar code. Length Max Default = 1500 The maximum number of[...]

101 Default = 150 The maximum number of characters in the scanned bar code. Setting the Postal Bar Codes Note: For best performance when reading postal bar codes, disable all other bar code symbologies and set the Image Contrast to the maximum of 7 (see “Imager Options, 2D Imager Only” later in this manual for setting instructions). Pos tnet Ch[...]

102 Checked Enable reading Australian Postal bar codes. Unchecked* Disable reading Australian Postal bar codes. Japan Post Che cked Enable reading Japanese Postal bar codes. Unchecked* Disable reading Japanese Postal bar codes. China Post Checked Enable reading China Postal bar codes. Unchecked* Disable reading China Postal bar codes. CP Min Defaul[...]

103 Setting the Trioptic Bar Code Trioptic Checked Enable reading Trioptic bar codes. Unchecked* Disable reading Trioptic bar codes. Decoder Options The “Decoder Options” function allows the operator to add t ermination characters to the bar code as it’s read by the internal scanner. SEND BAR CODE TYPE ID: (ON/OFF) ON: Sends a letter precedin[...]

104 DUPLICATE READS ALLOWED (ON/OFF) ON*: Enable reading th e same bar code multiple times. OFF: Disable reading the same bar code twice in a row. TERMINATION CHARACTER OVERRIDE (ON/OFF) ON: Strips any termination character from the bar code that was scanned. OFF*: Does not strip any termination character s from the bar code.[...]

105 The optional Termination Character is transmitted at the end of the data. None - None Tab - Horizontal Tab CR - Carriage Return (default) CRLF - Carriage Return & Line Feed Custom – User Defined Termination Character If the User Defined Termination Character is selected, then use the left 3 and 4 right arrow keys to select the custom char[...]

106 The purpose of the laser aim is to be able to tell where the laser beam is pointing when scanning bar codes that are a long way away from the unit. The laser point helps to locate the beam before the laser starts rastering. Once the laser starts rastering, the bar code will be scanned. Laser Timeout Turns off Laser / CCD after (1 – 9) seconds[...]

107 that are a long way away from the unit. The Green LED box helps to locate the center of the Red LED beam when the Centering box below is checked. Once the Green LED beam turns off, the bar code will be scanned. LED Power Adjust the intensity of the LED light (in percent, 100 = 100%). In brightly lit areas the LED light may not be necessary. Red[...]

108 Code Type Refers to the type of bar codes for which editing can be enabled, allowing editing to be specific to a type of bar code. The choices are listed below: All Barcodes* Code 39 UPC - A UPC - E EAN - 13 EAN - 8 Int 2 of 5 Codabar Code 128 Code 93 MSI/Plessey Code 11 ISBN Strip Leading Characters (0 - 9, A - F) Refers to the number (0 - 15)[...]

109 Beep Options The following settings determine what tone and duration the M71V2 beeper will perform after a good bar code scan. You must save the settings for them to take effe ct. Saving Bar Code Settings You must either save your setting or you can restore the default settings for all bar code options. The 2D Imager settings are quite extensiv[...]

110 Date/Time The “Date/Time” function sets the M71V2 handheld terminal’s internal clock . These setting are saved e ven if the unit is powered off. You can hit the [ENTER] key to pop - up a calendar to make setting the date easier. You must “Save” the settings for them to take effect. Po rt Configuration The “Port Configuration” func[...]

111 Port : IrDA Printer Only All printer data will be sent out the Infrared port only. No data will be sent out the RS - 232 port. RS2 32 Printer Only All printer data will be sent out the RJ - 45 wired RS - 232 port. No data will be sent out the IrDA port. IrDA w/ RS232 Scanner The printer data will be sent out the IrDA port while the RJ - 45 wire[...]

112 Startup Options The “Start up Options” function allows the operator to setup various options used when the M71V2 is first powered on. Start Dir: This is the directory that the M71V2 terminal will use for any auto - start programs. Start Prog: This is the program the M71V2 will automatically start when the unit is powered on. When a startup [...]

113 Enable Allows scanned data to be routed to the keyboard input buffer. Do Barcode Daemon: not disable this function if bar code scanning is required. Enable User Menu: With "Enable User Menu" set, the M71V2 will show a simplified Main Menu while requiring a password to enter an "Administrative Mode". This User Menu gives the [...]

114 Linux Prompt The “Linu x Prompt” function puts the M71V2 handheld terminal into its native Linux Operating System. Most of the Linux commands are available on the M71V2.[...]

115 Journaling File System The M71V2 Handheld terminal includes the capab ility to save programs and data. There is a special, non - volatile sub - directory to store user information. This sub - directory is jffs2 (lower case only) and can be accessed from the Linux prompt by typing “ cd jffs2 ”. You can list the contents of this direc tory by[...]

116 Tools/Utilities The “Tools and Utilities ” function includes the built - in Calculator and Basic interpreter functions. Calculator The M71V2 handheld terminal comes equipped with a powerful calculator utility which can be activated from the Tools/Utilities menu. The calculator can do simple mathematical functions by simply typing the data f[...]

117 Force Sleep Now The “Force Sleep Now” function puts the M71V2 handh eld terminal in sleep mode . The red LED above the power key will flash to show the unit is still active but is currently in sleep mode. The Sleep Timer is now started. Press the red Power key to resume from sleep mode (unless “Wakeup on All Keys” is selected in Power M[...]

118 The M71V2 Expanded Memo ry Handheld Te rminal This chapter describes the advanced features of the M71V2 Handheld Terminal with the Expanded Memory module installed. The M71V2 was designed with expand ability in mind. The heart of the M71V2 is a high speed processor and memory card. This card can be replaced with an expanded memory version which[...]

119 Diagnostic Menu > Firmware Version You should now see a screen similar to the ones above. Note in the above examples, the standard memory version DOES NOT have a - 32 extension list ed with the RAM DISK IMAGE version or the LINUX KERNEL version. The RAM DISK IMAGE for the standard memory version will not have a 32 listed in the file name. Th[...]

120 File Transfer Protocol (FTP) The M71V2 Handheld Terminal includes a client side FTP program which makes it ve ry easy to upload and download files and data. Almost any computer using almost any FTP program can send and receive files to and from the M71V2 using the radio link. The “host” computer must have a logical network connection to the[...]

121 Once the operator hits [ ENTER ] from the welco me screen then the control menu for the links program is selected by hitting the [ Esc ] key. If the M71V2 terminal has connectivity to the internet, then the operator can type in any valid URL and the M71V2 will display the web page. If there is no connecti vity to the internet or if a local fire[...]

122 By changing “User font size” and “Scale all images by (%)” you can get more information on one M71V2 display screen. The M71V2 Handheld Terminal can be setup to automatically start the links program and go directly to a predetermined website. This is done by using the M71V2 menu system and selecting “Local Settings > Startup Option[...]

123 Connect 3270 and 5250 TE Clients The M71V2 Expanded Memory version handheld terminal can run an optional 3270 or 5250 terminal emulation client from Connect Inc. The 3270 and 5250 TE clients are typically used with IBM AS/400 and IBM mainframe systems. This optional software allows the M71V2 handheld terminal to work just like a standard IBM wo[...]

124 Provides host - based 5250/3270 and VT100/220 wireless terminal support for: Stay - Linked ATSM (Advanced Terminal Session Management) features enable centralized support and development staff to: • Monitor devices/view screens in real - time • Send software u pdates to devices • Send text messages to devices • Troubleshoot with event l[...]

125 Index 5 5250 and 3270 terminal emulation, 28 A Access Point, 26 Adva nced Long Range laser, 7 Applications Menu, 27 Area Imager, 7 Auth setting, 36 Avg. Noise, 58 Avg. Signal, 58 B Backlight on Boot, 57 Backlight Timer, 57 Bar Code Edit Options, 107 Battery Low, 65 Battery Status, 64 Broadcast Address, 32 C Calculator, 115 Calculator utility, 1[...]

126 Setting the UPC Barcode, 6 9, 84, 85, 86, 87, 88 SIM (Subscriber Identity Module), 17 simultaneous telnet, 40 Sleep mode, 116 Sleep Timer, 56 SSID, 33 standard laser, 6 Start Dir, 112 Start Param, 112 Start Prog, 112 Symbology Settings, 67, 82 T Telnet, 27 Terminal Options, 43, 44, 52 Terminal Overview, 3 Test label, 63 Tools and Utilities, 115[...]