IBM PANEL1173-841 manuale d’uso

PANEL1173-841 17” TFT Expandable Intel ® Core ™ 2 Duo Industrial Panel PC with 2 PCI User’s Manual[...]

ii Disclaimers This manual has been ca refully checked and believed to co ntain accurate information. AXIOMTEK Co., Ltd. assumes no responsibility for any infringements of patents or any thir d party’s rights, and any liability arising from such use. AXIOMTEK does not warrant or assume any lega l liability or responsibility for the accurac y, com[...]

iii Safety Approvals  CE Marking  FCC Class A  FCC Complia nce This equipment has been te sted in compliance with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are meant to provide reasonable protec tion against harmful interference in a re sidential installation. If n ot installed and u sed in[...]

iv Safety Precautions Before getting started, please read the following important sa fety precautions. 1. The PANEL1173-841 Series does not come equipped with an operating sys tem. An operating sys tem must be loaded first before installing any software into the computer. 2. Be sure to ground yourself to preven t static charge when installing the i[...]

v z Before handling a b oard or integrated c ircuit, touch an unpainted portion of the system unit chassis for a few seconds. This will help to disch arge any static electricity on your body. z When handling boards and componen ts, wear a wrist- grounding strap, availab le from most electronic component stores. Trademarks Acknowledgments AXIOMTEK i[...]

vi Table of Contents Disclaimers ............................................................. .......................................... .... ii Safety A pprov als ........................................... .......................................... ............ iii Safety Precautions ........................................ .....................[...]

vii C h a p t e r 4 ..................... ........... ............... ............ ............ .......... 61 4.1 System .............................................. .......................................... ... 61 4.2 Touch Screen ............................................. .................................... 62 4.2.1 Specifica tion ..... ..[...]

viii MEMO[...]

PANEL1173-841 User’s Manual Introduction 1 C h a p t e r 1 Introduction This chapter contains general information and detailed spec ifications of the PANEL1173-841 . Chapter 1 includes the following sections:  General Description  System Specification  Dimensions  Front View & I/O Outlets  Package List[...]

PANEL1173-841 User’s Manual Introduction 2 1.1 General Description The PANEL1173-841 is a 17 ” Industrial panel PC which features Intel ® Core ™ 2 Duo processo r and Intel ® Q965 chipset to provide powerful computing performance. This pan el PC also offers the expansion ability with two PCI slots. It adopts built-in speaker an d WLAN module[...]

PANEL1173-841 User’s Manual Introduction 3 1.2 System Specifications 1.2.1 Main CPU Board z CPU  Socket LGA775 for Intel ® Core TM 2 Duo/Core TM Solo Processor with FSB 533/800/106 6 MHz , max up to E6400. NOTE It doesn’ t support the processor with FSB 1333 MHz, and it is not recommended to use Quad-Core CPU. z Sy ste m Chip set  Intel [...]

PANEL1173-841 User’s Manual Introduction 4  One DVI- I Output z Ethernet  First port with i82566DM Gigabit Ethernet PHY, Second port with RTL8111B for Gigabit/Fast Ethernet z Audio  HD Audio for two channels output  MIC-In, Line-Out z Storage  Four SATA-300 interface z Box-Header  One 26-pin for shared LPT/FDD(optional) z Expans[...]

PANEL1173-841 User’s Manual Introduction 5 z Heat Dispensing Design z Tw o slots for PCI expansion z Net Weight  15 Kgs z Dimension (Main Body Size)  450mm (17.71”)(W) x 150 mm (5.90”)(D) x 370mm (14.56”)(H) z Operation Temperature  0 ℃ to 40 ℃ ; Relative Humidity 50% z Relative Humidity  10% to 85% @ 40 ℃ , Non-Cond ensin[...]

PANEL1173-841 User’s Manual Introduction 6 1.3 Dimensions This diagram shows you dimens ions and outlines of the PANEL117 3- 841 .[...]

PANEL1173-841 User’s Manual Introduction 7 1.4 Front View and I/O Outlets 1.4.1 Front View Please refer to the following illustration for features and c ontrols of the PANEL1173-841 fro nt bezel . No Function 1 SEL+ 2 SEL- 3 Backlight ON/OFF[...]

PANEL1173-841 User’s Manual Introduction 8 1.4.2 I/O Outlets The following figure shows the I/O loca tions of the PANEL1173-841 . No Connector No Connector 1 COM1 (RS-232/422/485) 7 COM 2 & COM 3 (RS-232) 2 DVI-I 8 Pow er Switch 3 Giga LAN x 2 9 AC power 4 IEEE 1394a x 2 10 PCI slots x 2 5 USB v2.0 x 4 11 P/S2 6 Mic-in, Line-Out[...]

PANEL1173-841 User’s Manual Introduction 9 1.5 Package List The package bundle d with your PANEL1173-841 shou ld contain the following items: z P1173-841 x 1 z AC power cord x 1 z Panel mount kit x 7 z Driver CD x1 z LGA 775 CPU Cooler x 1 z DVI TO VGA Ada ptor x 1 z PS/2 Splitter – Y Cable x 1 z SATA Cable x 1 z Dual 3.5” HDD bracket kit wit[...]

PANEL1173-841 User’s Manual Introduction 10 MEMO[...]

PANEL1173-841 User ’ s Manual Hardware Installation 11 C h a p t e r 2 Hardware Insta l la tion The PANEL1173-841 is convenient for your various hardware configurations in flexible ways, su ch as CPU (Central Processin g Unit), HDD (Hard Disk Drive), Memory Module (DRAM), CD-ROM, Add-On card, and more. The chapter 2 will show you ho w to install [...]

PANEL1173-841 User’s Manual Hardware Installation 12 Step 1 Unscrew screws to remove the rear chassis. Step 2 Remove the riser ca rd fix kit.[...]

PANEL1173-841 User ’ s Manual Hardware Installation 13 Step 3 Install the CPU and DDR DRAM in the P ANEL1173-841. DRAM CPU[...]

PANEL1173-841 User’s Manual Hardware Installation 14 2.2 Installing the th e Hard Disk Drive The PANEL1173-841 offers a convenient drive bay module for user s to install HDD. The system off ers us ers one 3.5” Hard Disk Drives for installation. If you want to install dual 3.5” HDD, or 2.5” HDD, the PANEL1173-841 also provides the du al 3.5?[...]

PANEL1173-841 User ’ s Manual Hardware Installation 15 Step 4 Fix the Hard Disk to the HDD bracket and connect the cable to complete the installa tion. (4-1) (4-2) ¾ Installing Dual 3.5 ” HDD If installing the dual 3.5” HDD, please follow the steps : Step 1 Change HDD bracket from 3.5 ” to dual 3.5 ” .[...]

PANEL1173-841 User’s Manual Hardware Installation 16 Step 2 Fix the Hard Disk to the HDD bracket to complete the installation.[...]

PANEL1173-841 User ’ s Manual Hardware Installation 17 Note When installing Dual 3.5” HDD, users mu st inst all a fan to decrease sys tem heat. Installation step as following: ¾ Installing fan w hen using dual 3.5 ” HDD Step 1 Screw the fan to the right side of cover. (1-1)[...]

PANEL1173-841 User’s Manual Hardware Installation 18 (1-2) (1-3) Step 2 Connect power cable of fan to 3 pin fan connector (CN3) in motherboard.[...]

PANEL1173-841 User ’ s Manual Hardware Installation 19 (2-1) . (2-2) ¾ Installing 2.5 ” HDD If installing the 2.5” HDD, please follow the steps: Step 1 Change HDD rubber of HDD bracket from 3.5 ” to 2.5 ” .[...]

PANEL1173-841 User’s Manual Hardware Installation 20 Step 2 Fix the Hard Disk to the HDD bracket to complete the installation.[...]

PANEL1173-841 User ’ s Manual Hardware Installation 21 2.3 CD-ROM Installation The PANEL1173-841 offer s a convenient drive bay module for users to install CD-ROM. When installing the CD-ROM, refer to the following instructions and illustration: Step 1 Unscre w screws to remove the rear ch assis. Step 2 Remove th e riser card fix kit. Step 3 Unsc[...]

PANEL1173-841 User’s Manual Hardware Installation 22 2.4 Add-on Card Installation The PANEL1173-841 provide s a riser card for PCI slots expansion. The riser card asse mbly can accommodate both half-siz e expansion cards. To install the riser card, refer to the following figure and instructions below: Step 1 Remove the rear chass is. Setp 2 Remov[...]

PANEL1173-841 User ’ s Manual Hardware Installation 23 Step 4 Insert the add-on card in the socke t firmly until it is completely seated.[...]

PANEL1173-841 User’s Manual Hardware Installation 24 2.5 Serial Port Interface The PANEL1173-841 has four onboard serial ports, COM1, COM2, COM3, COM4 are RS-232 Port Connector. The connector, COM1, COM2, COM3 are DB-9 c onnector, and the following table shows the pin assign ments of this connector. Pin Signal Pin Signal 1 DCD, Data Carrier Detec[...]

PANEL1173-841 User ’ s Manual Hardware Installation 25 Pin Signal Pin Signal 21 NC 22 Ground 23 TXC+ 24 TXC- C1 CRT-RED C2 CRT-GREEN C3 CRT-BLUE C4 CRT-HSYNC C5 VGAGND NOTE It doesn’ t support display in LCD and DVI-D simultaneously. DVI-D is o nly available after booting up in Windows XP.[...]

PANEL1173-841 User’s Manual Hardware Installation 26 2.7 Ethernet The PANEL1173 -841 pro vides a NE2000 compatible Ethernet (RJ-45) interfaces. For network connection , just plug in one cable end of the system’s 10/100/1000-Ba se-T Hub into a s tandard RJ-45 c onnector. Please refer to detailed pin assign ment list below: Pin Signal 1 TX+ (Data[...]

PANEL1173-841 User ’ s Manual Hardware Installation 27 2.8 Mountings Way – Panel/ Rack There are two mounting ways available for the PANEL1173-841 system: Panel and Rack mounting. 2.8.1 Panel Mounting The PANEL1173-841 is de signed for panel mount application. To mount the PANEL1173-841 , the standard set of mounting kit (included in the system[...]

PANEL1173-841 User’s Manual Hardware Installation 28 2.8.2 Rack Mounting The PANEL1173-841 als o support rack mounting. The rack mounting kit is optional. Please refer to the following proc edure. 1. Fix f ive screws ea ch side. 2. Complete the rack mounting.[...]

PANEL1173-841 User ’ s Manual Phoenix-Award BIOS Utility 29 C h a p t e r 3 Phoenix-Award BIOS Utility The Phoenix-Award BIOS provides users with a built-in Setup program to modify basic syste m configuration. All configured parameters are stored in a battery-backed-up RAM (CMOS RAM) to save the Setup information whenever the power is turned off.[...]

PANEL1173-841 User’ s Manual Phoenix-Award BIOS Utility 30 3.2 Control Keys Up arrow Move cursor t o the previous ite m Do wn a rr ow Move cursor t o the next item Left arrow Move cursor t o the item on the le ft hand Right arrow Move to the it em in the right han d Esc key Main Menu -- Quit and de lete changes int o CMOS Status Pa ge Set up Menu[...]

PANEL1173-841 User ’ s Manual Phoenix-Award BIOS Utility 31 3.4 The Main Menu Once you enter the Award BIOS CM OS Setup Utility, the Main Menu appears on the screen. In t he Main Menu, there are several Setup functions and a couple of Exit options for your selection. Use arrow keys to select the Set up Page you intend to configure the n press <[...]

PANEL1173-841 User’ s Manual Phoenix-Award BIOS Utility 32 3.5 Standard CMOS Setup Menu The Standard CMOS Setup Menu displays basic information about your system. Use arrow keys to highlight each item, and use <PgUp> or <PgDn> key to select t he value you want in each item. z Date The date format is <day>, <date> <month[...]

PANEL1173-841 User ’ s Manual Phoenix-Award BIOS Utility 33 z IDE Primary Master/Pri mary Slave These items identify the types of each IDE channel installed in the computer. There are 45 predefined types (Type 1 to Type 45) and 2 user’s definable types (Type User) for Enhanced IDE BIOS. Press <PgUp>/<+> or <PgDn>/< − >[...]

PANEL1173-841 User’ s Manual Phoenix-Award BIOS Utility 34 Press <Esc> to return to the Main Menu page. 3.6 Advanced BIOS Features This section allows you to configure and improve your system, to set up some system features according to your preference.[...]

PANEL1173-841 User ’ s Manual Phoenix-Award BIOS Utility 35 z CPU Feature Scroll to this item and press <Enter> to view the CPU Feature sub menu. z Hard Disk Boot Priori ty Scroll to this item and press <Enter> to view the sub menu to decide the disk boot priority.[...]

PANEL1173-841 User’ s Manual Phoenix-Award BIOS Utility 36 z Virus Warning This option flashes on the screen. During and after the system boot up, any att empt to write to the boot sector or partition table o f the hard disk drive will halt the system with the following message. You can run an anti-virus program to locate the problem. The default[...]

PANEL1173-841 User ’ s Manual Phoenix-Award BIOS Utility 37 z First/Second/Third B oot Device These items let you select the 1st, 2nd, and 3rd devices that the system will search for during its boot-up sequence. The wide range of selection includes Floppy, LS120, ZIP100, HDD0~3, SCSI, and CDROM. z Boot Other Device This item allows the user to en[...]

PANEL1173-841 User’ s Manual Phoenix-Award BIOS Utility 38 z Typematic Rate (Chars/Sec) This option refers to character numbers typed per second by the keyboard. The default value is “6” . 6 6 cha racters per second 8 8 cha racters per second 10 10 charact ers pe r second 12 12 charact ers pe r second 15 15 charact ers pe r second 20 20 chara[...]

PANEL1173-841 User ’ s Manual Phoenix-Award BIOS Utility 39 Use this item to e nable or disable APIC (Advanced Programmable Interrupt Controller) mode t hat provides symmetric multi- processing (SMP) for systems. z MPS Version Control For OS This item specifies the version of the Multiprocessor Specification (MPS). Version 1.4 has extended config[...]

PANEL1173-841 User’ s Manual Phoenix-Award BIOS Utility 40 3.7 Advanced Chipset Features This section contains completely optimized chipset’s features on th e board that you are strongly recommended to leave all ite ms on this page at their def ault values unless you are very familiar wit h the technical specifications of your s ystem hardware.[...]

PANEL1173-841 User ’ s Manual Phoenix-Award BIOS Utility 41 z PCI Express Root Port Func Scroll to this item and press <Enter> t o view the sub menu to decide the PCI E xpress Port. Press <Esc> to return to the Advanced Chipset Featurs page. *** VGA Setting *** z PEG/Onchi p V GA Contro l Use this item to choose the primary display ca[...]

PANEL1173-841 User’ s Manual Phoenix-Award BIOS Utility 42 z Boot Display This item is for Intel define ADD card only. Press <Esc> to return to the Main Menu page. 3.8 Integrated Peripherals This section allows you to configure your SuperIO Device, IDE Function and Onboard Device.[...]

PANEL1173-841 User ’ s Manual Phoenix-Award BIOS Utility 43 z OnChip IDE Device Scroll to this item and press <Enter> to view the sub menu OnChip IDE Device. ¾ IDE HDD Block Mode Block mode is also called block transfer, multiple commands, or multiple sector read/write. If your IDE hard d rive supports block mode (most new drives do), sele[...]

PANEL1173-841 User’ s Manual Phoenix-Award BIOS Utility 44 Master/Slave PIO items on the menu. ¾ IDE Master/Slave PIO The four IDE PIO (Programmed Input/Output) fields let you set a PIO mode (0-4) for each of the four IDE devices that the onboard IDE int erface supports. Modes 0 to 4 provide successively increased performance. In Aut o mode, the[...]

PANEL1173-841 User ’ s Manual Phoenix-Award BIOS Utility 45 z Super IO De vice Scroll to this item and press <Enter> t o view the sub menu Super IO Device. ¾ Onboard FD C Controller Select Enabled if your s ystem has a floppy disk controller (FDC) installed on the sy stem board and you wish to use it. If you install and-in FDC or the syste[...]

PANEL1173-841 User’ s Manual Phoenix-Award BIOS Utility 46 ¾ Paralle l Port Mod e Select an operating mode for the onboard parallel (printer) port. Select Normal unless your hardware and software require one of the other modes offered in this field. The options available are EPP1.9, ECP, SPP, ECPEPP1.7, EPP1.7. ¾ ECP Mode Use DMA Select a DMA c[...]

PANEL1173-841 User ’ s Manual Phoenix-Award BIOS Utility 47 3.9 Power Management Set up The Power Management Setup allows you to save energy of your system effectively . It will shut down t he hard disk and turn OFF video display after a period of inactivit y.[...]

PANEL1173-841 User’ s Manual Phoenix-Award BIOS Utility 48 z ACPI Function This item allows you to enable/disable the Advanced Configuration and Power Management (ACPI ). The function is always “ Enabled ”. z ACPI Suspend Type This item specifies t he power s aving modes for ACPI fu nction. If your operating system support s ACPI, such as Win[...]

PANEL1173-841 User ’ s Manual Phoenix-Award BIOS Utility 49 to restore the syst em when a “wake up” event occurs. z Run VGABIOS if S3 Resume When this item is set Auto, the syst em will run VGA BIOS if it is reaumed from the S3 state. z Power Management This option allows you to select the type (or degree) of power saving for Doze, Standby, a[...]

PANEL1173-841 User’ s Manual Phoenix-Award BIOS Utility 50 connect the fax/ modem to the board Wake On Modem connector for working this feature. z Suspend Mode After the selected period of system inactivity (1 minute to 1 hour), all devices except the CPU shut off. The default value is “Disabled” . Disabled S ystem w ill never enter SUSPEND m[...]

PANEL1173-841 User ’ s Manual Phoenix-Award BIOS Utility 51 ** Reload Global Timer Ev ents ** Global Timer (power management) events can prevent the system from entering a power sav ing mode or can awaken the system from such a mode. z Primary/Secondary IDE 0/1 Use this item to configure the ID E devices monitored by the system. z FDD, COM, LPT P[...]

PANEL1173-841 User’ s Manual Phoenix-Award BIOS Utility 52 3.10 PnP/PCI Configuration Setup This section describes configuring the PCI bus system. PCI, or Personal Computer Interconnect, is a s ystem which allows I/O dev ices to operate at speed s nearing the speed the CPU itself uses when communicating with its own special components. This secti[...]

PANEL1173-841 User ’ s Manual Phoenix-Award BIOS Utility 53 interrupt to one of the following types in accordance with the type of devices using the i nterrupt: 1. Leg ac y ISA Devices complian t with the ori ginal PC AT bus specification, requiring a specific in ter rupt (such as IRQ4 for ser i al port 1). 2. PCI/I SA PnP Dev ices compliant w it[...]

PANEL1173-841 User’ s Manual Phoenix-Award BIOS Utility 54 3.11 PC Health Status This section supports hardware monitering that lets you monitor those parameters for critical v oltages, temperatures and fan speed of t he board. z Shutdow n Temperature It helps you set the maximum temperature they system can reach before powering down. z Current S[...]

PANEL1173-841 User ’ s Manual Phoenix-Award BIOS Utility 55 3 . 1 2 Frequency/Voltage Control This section is to control the CPU frequency and Supply Voltage, DIMM OverVoltage and AGP voltage. z CPU Clock Ratio Use this item to select the CPU’s frequency. z Auto Detect PCI Clk The enabled item can automatically disable the c lock source for a P[...]

PANEL1173-841 User’ s Manual Phoenix-Award BIOS Utility 56 3.13 Load Optimized Defaults This option allows you to l oad the default values to your sy stem configuration. These default settings are optimal and enable all high performance features. To load SETUP defaults value to CMOS SRAM, enter “Y”. If not, enter “N”.[...]

PANEL1173-841 User ’ s Manual Phoenix-Award BIOS Utility 57 3.14 Set Supervisor/User Password You can set either supervisor or user password, or both of then. Th e differences between are: 1. Superv isor password: can enter and change the options of the setup menus. 2. User password: jus t can enter but do not have the right to change the options[...]

PANEL1173-841 User’ s Manual Phoenix-Award BIOS Utility 58 3.15 Save & Exit Setup This allows you to de termine whether or not to accept the modifications. Typing “Y” quits the setup utility and saves all changes into the CMOS memory. Typing “N” brigs y ou back to Se tup utility.[...]

PANEL1173-841 User ’ s Manual Phoenix-Award BIOS Utility 59 3.16 Exit Without Savi ng Select this option to exit the Setup utility withou t savi ng the changes you have made in this session. Typing “Y” will quit the Setup utility without saving the modif ications. Typing “N” will return you to Set up utility.[...]

PANEL1173-841 User’ s Manual Phoenix-Award BIOS Utility 60 MEMO[...]

PANEL1173-841 User ’ s Manual Driver Installation 61 C h a p t e r 4 Driver Installation 4.1 System PANEL1173-841 supports Windows 2000/XP/Vista. To facilitat e the installation of t he system driver, please caref ully read the instructions in this chapter before start installing. 1. Here is t he path for the s ystem driver: Panel seriesP1173-84[...]

PANEL1173-841 User’ s Manual Driver Installation 62 4 .2 Touch Screen 4.2.1 Specification Touch Scree n 5-wire Analog Res istive typ e Touch Scree n Controller DMC9000 (1 0- bit A/D conve r te r ins i de) Communications RS-232 Baud Rate 19200 and 9600 baud selection Resoluti on 2048 x 2048 Mode Select ion PnP or non- PnP Pow er Input 5V DC Power [...]

PANEL1173-841 User ’ s Manual Driver Installation 63 4.2.2 Driver Installati on – Window s 2000/XP/Vista The PANEL1173-841 provides a driv er of the touch screen that users can install it under operating system Windows 2000/XP/Vista. To facilitate this touch screen driver installation, users should read the instructions in this chapter carefull[...]

PANEL1173-841 User’ s Manual Driver Installation 64 4. Select the “Standard Calibrate” tab.[...]

PANEL1173-841 User ’ s Manual Driver Installation 65 5. Calibration: To adjust the display with touch panel, click “Calibration” and follow the calibrate point to do calibration; there are five point s on screen for calibration. 6. Pres s OK.[...]

PANEL1173-841 User’ s Manual Driver Installation 66 4.2.3 Driver Installation - DOS ¾ Using “INSTALL.EXE” Utility to Install PenMount Softw are Driv er 1. Insert Driver CD and select the Panel seriesP1173- 841DriverStep5 - TouchDriverDOSInstall.exe 2. Press ENTER key to install t he drivers to drive C or use keyboard to key-in the hard[...]

PANEL1173-841 User ’ s Manual Driver Installation 67 C:PENMOUNTPMDETECT -N 5 -N9 ¾ Do Calibration 1. To adjust the touch screen mapping properly to display screen, use PM.BAT (C:PENMOUNTPM) to do calibration. Choos e “1” DO CALIBRATION (adjust screen mapping). 2. The message pops out to ask if you select the video mod e number. Use keybo[...]

PANEL1173-841 User’ s Manual Driver Installation 68 MEMO[...]

PANEL1173-841 User ’ s Manual Power Supply Specification 69 A p p e n d i x Power Supply Specification Power Supply FSP250-50GUB (250W, AC100~240V Input) 1. Electrical Requirements OUTPUT ELECTR ICAL REQUIREMENT S The subject power supply will meet all electrical specifications below, over the full op eration temperature range and dynamic load re[...]

PANEL1173-841 User’ s Manual Power Supply Specification 70 LOAD CAPACITY SPECIFICA TIONS The cross regulation defined as follows, the voltage regulation limits DC include DC Output ripple & noise. LOA D +3.3V +5V +12V - 12V +5VS B Condition_1 X X X X 2A Condition_2 0. 5A 0.3A 1A 0A 0.1A Condition_3 0. 5A 2 A 2A 0.8A 0.1A Condition_4 1 A 2A 17[...]

PANEL1173-841 User ’ s Manual Power Supply Specification 71 SHORT CIRCUIT PROTECTION Output short circuit is def ined to be a short circuit load of less t han 0.1 ohm. In the event of an output short circuit condition on +3.3V, +5V or +12V output, the po w er supply will shutdown and latch off. The power supply shall return to normal ope ration a[...]

PANEL1173-841 User’ s Manual Power Supply Specification 72  Vibration: 0.25G, 10~250Hz  Shock: -40G, 11mSec for Storage, -10G, 11mSec for operating 4. Reliability The power supply reliabil ity, when calculated by MIL- HDBK;latest revision, are ex c eed 100,000 hours with all output at maximum load an d an ambient temperature of 25 ℃ . 5. [...]