Impex MSS-1280 manuale d’uso

NOTE: Please read all i nstructions caref ully befor e using this product Table of Contents Safety Notice Hardware Identifier Assembly Instruc tion Parts L ist Warranty Ordering Parts Model MSS-1280 Retain This Manual for Reference 08-03-09 OWNER'S MANUAL DELUXE SMITH MACHINE MSS-1280 IMPEX ® INC. 14777 DON JULIAN RD., CITY OF INDUSTRY, CA 91[...]

TA BLE OF CONTENTS BEFORE YOU BEGIN...................................................................................... 1 IMPORTANT SAFETY NOTICES..................................................................... 2 SMITH MACHINE HARDW ARE PACK……….....….......................................... 4 SMITH MACHINE ASSEMBLY INSTRUCTIONS.....[...]

IMPORTANT SAFETY NOTICE PRECA UTIONS This exerci se machine is bui lt for optimum safety. How ever , certain precauti ons apply whenev er you operate a piece of exer cise equi pment. Be sure to read the entir e manual before you assemble or operate your machine. In particul ar, note the follow ing safety precautions: 1. Keep children and pets away [...]

WA RNING LA BEL PLA CEMENT The w arning labels shown here hav e been placed on the back of Rear Support, and Upper Frame. If the labels are missing or illegible, please call customer service at 1- 800-888-8899 for replacement s. A pply the labels in the location shown. 3[...]

SMITH MA CHINE HA RDWA RE PA CK NOTE: The f ollow ing p arts are not d rawn t o scale. Please use your ow n ruler t o measure the siz e. 4[...]

CA GE MA CHINE HA RDWA RE PA CK NOTE: The f ollow ing p arts are not d rawn to scale. Please use your ow n ruler t o measure th e size. 5[...]

SMITH MA CHINE A SSEMBLY INSTRUCTION Tools Required for A ssembling the Machine: Tw o Adj ustable Wrenches and A llen Wrenches. NOTE: It is strongly recommended that tw o or more people assemble this machine to avoid possible inj ury. STEP 1 (See Diagram 1) A.) Note: Do not tighten the Nuts and Bolts until instructed to do so. B.) Connect the two B[...]

STEP 2 (See Diagram 2) A.) Do not tighten Nuts and Bolts until instructed to do so. B.) Attach the Left Upr ight Beam (#1) to the Left Rear Support (#5) and onto the left Base Frame (#3). C.) Secure it to the Base Frame w ith two M10 x 4” Allen Bol ts (#54), four Ø ¾” W ashers (#57), and tw o M10 Aircraft Nuts (#58). D.) Secure it to the Left[...]

DIAGRAM 2 8[...]

STEP 3 (See Diagram 3) A.) Attach tw o Ø 2 3/8” x 2” Rubber Bumpers (#30) to the hol es on the Cross Brace ( #7). Insert the two R ear Short Guide R ods (#17) throug h the two Rubber Bumpers i nto the holes on Cross Brace. B.) Secur e each Guide Rod to the Cr oss Brace w ith one M10 x ¾” Allen Bolt (#56) and one Ø ¾” W asher (#57) from [...]

DIAGRAM 3 10[...]

CA BLE LOOP DIA GRA M 11[...]

STEP 4 (See Diagram 4 & Cable Loop Diagram) A.) Attach the 170” Upper C able (#25) to the openi ng on the Front U pper Frame (#14) . B.) Attach a Pulley (#33) to the opening . Secure it with one M10 x 4” Allen Bolt (#54) , two Ø ¾” W ashers (#57), and one M10 Air craft Nut (#58). C.) Draw the Cable over the Pull ey tow ard the back of t[...]

STEP 5 (See Diagram 5 & Cable Loop Diagram) A.) Attach the 62” Lower Cable (#26) to the open bracket on the Cross Br ace (#7). Attach a Pulley (#33) to the bracket. Secur e it w ith one M10 x 1 ¾” Allen Bolt (#52) , two Ø ¾ ” W ashers (#57), one L- shaped Cable Retainer (#24), and one M 10 Aircraft Nut (#58). B.) D raw the Cable under [...]

STEP 6 (See Diagram 6) A.) Place the Lifting Sleeve ( #8) in betw een the two Safety Stop Frames (#18) . Align the holes. Insert the W eight Bar (#13) from outside of one Safety Stop Frame through the Lifting Sleev e to the other Safe ty Stop Frame on the other side. B.) Turn and attach the two safety catch hooks on the Li fting Sleev e (#8) to the[...]

SMITH MA CHINE EXPLODED DIA GRA M 15[...]

SMI TH M ACHINE PA RT LIST KEY NO. DESCRIPTION Q’ty 1 Left Upright Beam 1 51 M10 x 1” Allen Bolt 1 2 Right Upr ig ht Beam 1 52 M10 x 1 ¾” Allen Bolt 2 3 Base Frame 2 53 M10 x 4 1/8” Allen Bolt 2 4 Top Beam 1 54 M10 x 4” Allen Bolt 7 5 Left Rear Suppor t 1 55 M10 x 3 ½” Allen Bolt 4 6 Right Rear Suppor t 1 56 M10 x ¾” Allen Bolt 12 [...]

BENCH HA RDWA RE PA CK NOTE: The f ollow ing p arts are not d rawn t o scale. Please use your ow n ruler t o measure the siz e. 17[...]

BENCH HA RDWA RE PA CK NOTE: The f ollow ing p arts are not d rawn t o scale. Please use your ow n ruler t o measure the siz e. 18[...]

BENCH A SSEMBLY INSTRUCTION STEP 1 (See Diagram 1) A.) Attach the Ben ch B ase Frame (#6) to the Re ar Stabilizer (#7). Secu re the side-ho le s with tw o M10 x 4” Car riag e Bolts (#41), tw o Ø ¾” W ashers (#31), and tw o M10 Aircr aft Nuts (#33). Secure the top hole w ith one M10 x 5/8” Al len Bolt ( #36) and one Ø ¾” W asher (#31). B[...]

STEP 2 (See Diagram 2) A.) Attach the M ain Seat Support (#1) to the Bench Base Frame (#6). Secur e it with three M10 x 4” Carri age Bolts ( #41), three Ø ¾” W ashers (#31), and three M10 Airc raft Nuts (#33). B.) Attach the Fr ont & Rear Seat Bracket ( #4 & #5) to Main Seat Suppor t. Secure each Bracket with one M 10 x 4” Allen Bol[...]

STEP 3 (See Diagram 3) A.) Al ign the br acket on the Backrest Adjustment Support ( #8) in betw een the two Backr est Supports (#3). Secur e it w ith four M8 x 1 5/8” Allen Bolts ( #34), eig ht Ø 5/8” W ashers (#30), and four M8 Aircr aft Nuts (#32). Do not tighten the Nuts and Bolts y et. B.) Inser t the Backrest Adjustment Support i nto the [...]

STEP 4 (See Diagram 4) A.) Attach the Backrest Board ( #13) to the Backrest Supports ( #3). Secure it w ith four M8 x 1 5/8” Allen Bol ts (#34) and four Ø 5/8” W ashers (#30). B.) Attach the Seat Pad (#12) to Fr ont & Rear Seat Bracket ( #4 & #5). Secure them w ith f our M8 x 1 5/8” Al len Bolts (#34) and four Ø 5/8” W ashers (#30[...]

STEP 5 (See Diagram 5) A.) Attach the Leg Developer (#2) to Main Seat Support ( #1). Secure it w ith one M10 x 3 1/8” Allen Bolt ( #38), tw o Ø ¾” W ashers (#31), and one M10 Air craft Nut (#33). B.) Inser t two Foam Tubes (#10) half way through the hol es on Leg Dev eloper. Push four Foam Rolls ( #16) onto the Tubes from both ends. Plug four[...]

24[...]

BENCH PA RTS LIST KEY NO. DESCRIPTION Q’ty 1 Main Seat Support 1 2 Leg Devel oper 1 3 Backrest Support 2 4 Front Seat Bracket 1 5 Rear Seat Bracket 1 6 Bench Base Frame 1 7 Rear Stabilizer 1 8 Backrest Adjustment Support 1 9 Backrest Adjustment Lev er 1 10 Foam Tube 2 11 Spring 1 12 Seat Pad 1 13 Backrest Board 1 14 2 ¾” Grip 1 15 2” x 1 5/8[...]

IMPEX ® INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX ® ") warr ants this produc t to be f ree fr om defec ts in work m anship and m aterial, under norm al use and service conditions, f or a period of two y ear s on the Fram e f rom the date of purchas e. This warranty ex tends only to the original purchaser. IMPEX 's obligation under t[...]