Impex SM-6200 manuale d’uso

NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Hardware Identifier Assembly Instruction Parts List Warranty Ordering Parts Model SM-6200 Retain This Manual for Reference 08-06-09 OWNER'S MANUAL MARCY DELUXE SMITH MACHINE SM-6200 IMPEX ® INC. 14777 DON JULIAN RD., CITY OF INDUSTRY, CA 917[...]

TABLE OF CONTENTS BEFORE YOU BEGIN..................................................................................... 1 IMPORTANT SAFET Y NOTIC ES.................................................................... 2 SMITH MACHINE HA RDWARE PAC K….......…............................................. 4 SMITH MACHINE ASSEMBL Y INSTRUCT IONS....[...]

PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your machine. In par ticular, note the following safety precautions: 1. Keep children and pets away from the machine at all times. DO N[...]

The w arning labels show n here have been placed on the Cross Brace, Rear Stabilizer and Upper Frame. If the labels are missing or illegibl e, please call customer service at 1-800-888-8899 for replacements. Apply the labels in the location shown. 3 SMITH MACHINE HARDWARE PACK[...]

4[...]

SMITH MACHINE HARDWARE PACK 5[...]

SMITH MACHINE HARDWARE PACK 6[...]

SMITH MACHINE ASSEMBLY INSTRUCTION Tools Required for Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches. NOTE: It is strongly recommended that two or more people assemble this machine to avoid possible injury. STEP 1 (See Diagram 1) A.) Do not tighten all nuts and bolts until instructed to do so . B.) Attach one Base Frame (#1) to [...]

DIAGRAM 1 8[...]

STEP 2 (See Diagram 2) A.) Attach the Vertical Frame Base (#9) to the Cross Brace (#6) from the bottom. Attach the Rear Vertical Frame (#8) ont o the Cross Brace on the top. Align the holes and secure them together with two M10 x 2 3/8” Carriage Bolts (#83), Ø ¾” Washers (#89), and M10 Aircraft Nuts (#90). B.) Attach the Backrest Board (#45) [...]

STEP 3 (See Diagram 3) A.) Attach the Weight Glide Post (#11) to the bracket on the Vertical Frame Base (#9). Secure it with one 3 1/8” x 1 ¾” Bracket (#31), M10 x 2 ½” Carriage Bolt (#84), Ø ¾” Washer (#89), and M10 Aircraft Nut (#90) to the upper hole, one M10 x 2 ½” Allen Bolt (#81) and one Ø ¾” Washer (#89) to the lower hole.[...]

DAIGRAM 3 11[...]

STEP 4 (See Diagram 4) A.) Attach the Butterfly Base (#37) to the Rear Vertical Frame (#8). Secu re it with two M10 x 2 ½” Carriage Bolts (#84), Ø ¾” Washers (#89), and M10 Aircraft Nuts (#90). B.) Attach two Swivel Pulley Brackets (#35) to the open brackets on the Rear Vertical Frame (#8). Secure each Bracket with one M10 x 2 ½” Allen Bo[...]

CABLE LOOP DIAGRAM 13[...]

STEP 5 (See Diagram 5 & Cable Loop Diagram) A.) Attach the 142” Upper Cable (#40) to the fr ont opening on the Upper Frame (#7). Attach a Pulley (#59) to the opening. Secure it wit h one M10 x 2 1/8” Allen Bolt (# 79), two Ø 1 1/8” x 3/8” Pulley Bushings (#52), and one M10 Aircraft Nut (#90). Ma ke sure the ball stopper on the Cable is[...]

STEP 6 (See Diagram 6 & Cable Loop Diagram) A.) Attach one end of the 86” Butterfly Cable (#42) to the clip on the Right Butterfly (#39). Draw the Cable to the right open Swivel Pulley Bracket (#35). B.) Attach a Small Pulley (#58) to the Swivel Pu lley Bracket. Secure it with one M10 x 1 ¾” Allen Bolt (#78), two Ø ¾” Washers (#89), an[...]

STEP 7 (See Diagram 7 & Cable Loop Diagram) A.) Insert the tip of the 127” Lower Cable (#41) through the opening on the Foot Plate (#26) to the opening on the Vertical Frame Base (#9). B.) Attach a Small Pulley (#58) to the opening. A ttach the Foot Plate to the Frame. Align the holes and secure the Foot Plate, Vertical Frame Base, and the Sm[...]

DIAGRAM 7 17[...]

STEP 8 (See Diagram 8) A.) NOTE: Help of another person is strongly recommended for this step. Place the Lifting Sleeve (#13) in between the two Safety Stop Fr ames (#16). Align the holes and insert the Weight Bar (#15) all the way through. Center the bar and use the two M8 x 3/8” Allen Bolts (#86) on the two Safety Stop Frame to secure the Weigh[...]

SMITH CAGE EXPLODED DIAGRAM 19[...]

SMITH CAGE PARTS LIST KEY NO. DESCRIPTION Q’ty 1 Base Frame 2 51 Ø 1” x 5/8” Pulley Bushing 2 2 Front Vertical Frame 2 52 Ø 1 1/8” x 3/8” Pulley Bushing 2 3 Left Vertical Frame 1 53 Ø 1” x ¾” Pulley Bushing 2 4 Right Vertical Frame 1 54 1 ½” Sleeve 4 5 Front Top Beam 1 55 5 ¾” x 2” Rubber Bumper 2 6 Cross Brace 1 56 3 3/8?[...]

MULTI-PURPOSE BENCH HARDWARE PACK 21[...]

MULTI-PURPOSE BENCH ASSEMBLY INSTRUCTION Tools Required for Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches. NOTE: It is strongly recommended that this machine be assembled by two or more people to avoid possible injury. STEP 1 (See Diagram 1) A.) Attach the Left & Right Rear Stabilizer (#2 & #3) to the Main Frame (#1) fr[...]

STEP 2 (See Diagram 2) A.) Align the bracket on the Backrest Adjustment Support (#6) in between the two Backrest Supports (#12). Secure it with four M8 x 1 5/8” Allen Bolts (#40), eight Ø 5/8” Washers (#45), and four M8 Aircraft Nuts (#48). Do not tighten the Nuts and Bolts yet . B.) Insert the Backrest Adjustment Support ( #6) into the openin[...]

STEP 3 (See Diagram 3) A.) Place the Seat Pad (#17) onto Seat Bracket (#5). Secure it wit h four M8 x 1 3/8” Allen Bolts (#41) and Ø 5/8” Washers (#45). B.) Attach the Backrest Board (#16) to the two Backrest Supports (#12). Secure it with four M8 x 1 3/8” Allen Bolts (#41) and Ø 5/8” Washers (#45). C.) When adjusting the Backrest Board t[...]

STEP 4 (See Diagram 4) A.) Attach the Leg Developer (#4) to the open bracket on the Leg Developer holder on Main Frame (#1). Secure it with an Axle (#15), two M10 x 5/8” Allen Bolts (#35), and two Ø ¾” Washers (#44). B.) Insert two Foam Tubes (#13) halfway thr ough the holes on the Leg Developer. Push four Foam Rolls (#22) onto the Tubes from[...]

26[...]

MULTI-PURPOSE BENCH PARTS LIST KEY NO. DESCRIPTION Q’ty 1 Main Frame 1 2 Left Rear Stabilizer 1 3 Right Rear Stabilizer 1 4 Leg Developer 1 5 Seat Bracket 1 6 Backrest Adjustment Support 1 7 Arm Curl Stand 1 8 Curl Bar Handle Support 1 9 Backrest Adjustment Lever 1 10 ¾” Curl Bar Support End Cap 1 11 Lock Pin 1 12 Backrest Support 2 13 Foam Tu[...]

IMPEX ® INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX ® ") warrants this product to be free from defec ts in workmanship and material, under normal use and service conditions, for a period of two years on t he Frame from the date of purchase. This warranty extends only to the original purchaser. IMPEX's obli gation under this Warranty i[...]