Infiniti FX35 (2011) manuale d’uso

2011 Infiniti FX Owner’s M anual Printing: February 2011 (08) / OM1E 0S51U2 / Printed in U.S.A. For y our safety , re ad car efully and keep in thi s vehic le. 2011 Infiniti FX[...]

Y our INFINITI represents a new way of thinking about vehicle design. It integrates advanced engineering and superior crafts- manship with a simple, refined aesthetic sensitivity associated with traditional Ja- panese culture. The result is a different notion of luxury and beauty. The car itself is impor tant, but so is the sense of harmony that th[...]

ON-P AVEMENT AND OFF-ROAD DRIVING This vehicle will handle and maneuver differently from an ordinary passenger car because it has a higher center of gravity for off-road use. As with other vehicles with features of this type, failure to operate this vehic le correc tly may result in loss of control or an accident. Be sure to read “ On-pavement an[...]

Arrows in an illustration that are similar to those above call attention to an item in the illustration. CALIFORNIA PROPOSITION 65 WARNING WARNING Engine Exhaust, some of its constituents, and certain vehicle components contain or emit chemic als known t o the State of California to cause cancer and birth defects or other reproductive harm. In addi[...]

INFINITI CUSTOMER CARE PRO GRAM INFINITI CARES ... Both INFINITI and your INFINITI retailer are dedic ated to serving all your automotive needs. Your satisfaction with your vehicle and your INFINITI retailer are our primary concerns. Y our INFINITI retailer is always available to assist you with all your automobile sales and service needs. We appre[...]

T able of C ontents Model "S51-D" Edited: 2010/ 10/ 13 Illustrated table of contents 0 Safety — Seats, seat belts and supplemental restraint system 1 Instruments and controls 2 Pre-driving chec ks and adjustments 3 Monitor, climate, audio, phone and voice recognition systems 4 Starting and driving 5 In case of emergency 6 Appearance and[...]

[...]

Seats, seat belts and Supplemental Restraint System (SRS) .................................................. 0- 2 Exterior front ................................................... 0 - 3 Exterior rear .................................................... 0- 4 Passenger compartment ................................... 0- 5 Coc kpit ...................[...]

SSI0845 1. Child restraint anchor points (for top tether strap child restraint) (Page 1- 25, P .1-35) 2. Seat belts (P .1-12) 3. Front-seat Active Head Restraint (P .1-6) 4. Roof-mounted curtain side-impact and rollover supplemental air bags (P .1-38) 5. Supplemental front-impact air bags (P .1-38) 6. LA TCH (Lower Anc hors and Tethers for CHildren[...]

SSI0445 1. Hood (P .3-19) 2. Headlight and turn signal (P .2-36) — Bulb replace ment (P .8-28) — Adaptive Front lighting System (AFS) (if so equipped) (P .2-39) 3. Windshield wiper and washer (P .2-33) — Maintenance (P .8-21) 4. Moonroof (P .2-60) 5. Roof rack (if so equipped) (P .2-57) 6. Power windows (P .2-58) 7. Outside mirrors (P .3-31) [...]

SSI0446 1. Rear view camera (if so equipped) (P .4-23, P .4-30) 2. Lift gate (P .3-19) — Intelligent Key system (P .3-6) — Remote keyless entr y system (P .3-15) 3. Rear window defroster (P .2-36) 4. High-mounted stop light (Bulb replace - ment) (P .8-28) 5. Rear window wiper and washer (P .2-35) — Maintenance (P .8-22) 6. Antenna (P .4-49) 7[...]

SSI0447 1. Coat hooks (P .2-53) 2. Rear personal light (P .2-63) 3. Mobile Entertainment System (MES) (if so equipped) — Flip-down screen (P .4-96) — Digital V ersatile Disc (DVD) drive (P .4-96) — Headphones (P .4-98) — DVD remote controller (P .4-99) 4. Power window controls (P .2-58) 5. Automatic drive positioner switc h (if so equipped)[...]

SIC4246 1. Outside mirror remote control switch (P .3-31) 2. Intelligent Brake Assist (IBA) off switch (if so equipped) (P .2-46) 3. Instrument brightness control switc h (P .2-40) 4. Headlight, fog light and turn signal switch (P .2-36) 5. Steering-wheel-mounted controls (left side) — For audio system (P .4-48) — For Bluetooth ® Hands-Free Ph[...]

10. V ehicle Dynamic Control (VDC) OFF switch (P . 5-80) 11. Intelligent Key port (P . 5-12) 12. Power lift gate switc h (if so equipped) (P .3-19) 13. Power lift gate main switch (if so equipped) (P .3-19) 14. TRIP/RESET switch for twin trip od- ometer (P .2-6) 15. Electric tilting/telescopic steering wheel lever (if so equipped) (P .3- 28) 16. Ma[...]

SSI0635 1. Side ventilator (P .4-41) 2. Paddle shifter (if so equipped) (P .5-16) 3. Meters and gauges (P .2-5) 4. Center ventilator (P .4-41) 5. Center multi-function control panel — Navigation system* (if so equipped) — V ehicle information and setting buttons (P .4-7) — Around View Monitor (if so equipped) (P .4-30) 6. Center display (P .4[...]

SIC3825 1. Tac hometer (P .2-7) 2. Warning/Indicator lights (P .2-12) 3. Speedometer (P .2-6) 4. Engine coolant temperature gauge (P .2-7) 5. Dot matrix liquid crystal display/Od- ometer/twin trip odometer (P .2-22) 6. Fuel gauge (P .2-8) METERS AND GAUGES Illustrated table of contents 0-9[...]

SDI2262 VQ35HR ENGINE 1. Fuse/fusible link holder (P .8-23) 2. Battery (P .8-16) 3. Radiator filler cap (P .8-9) 4. Engine oil dipstic k (P .8-10) 5. Engine oil filler cap (P .8-10) 6. Brake fluid reservoir (P .8-15) 7. Window washer fluid reservoir (P .8-15) 8. Power steering fluid reservoir (P .8-14) 9. Air cleaner (P .8-20) 10. Drive belts (P .8[...]

SDI2264 VK50VE ENGINE 1. Fuse/fusible link holder (P .8-23) 2. Battery (P .8-16) 3. Engine oil filler cap (P .8-10) 4. Radiator filler cap (P .8-9) 5. Engine oil dipstic k (P .8-10) 6. Brake fluid reservoir (P .8-15) 7. Window washer fluid reservoir (P .8-15) 8. Power steering fluid reservoir (P .8-14) 9. Air cleaner (P .8-20) 10. Drive belt loca t[...]

Warning light Name Page All-Wheel Drive (AWD) warning light (AWD mod- els)* 2-13 Anti-lock Braking System (ABS) warning light 2-13 Automatic Transmission (A T) c heck warning light 2-13 Brake warning light 2-14 Charge warning light 2-14 Distance Control Assist (DCA) system warning light (orange)* 2-14 Engine oil pressure warn- ing light 2-15 Intell[...]

MEMO Illustrated table of contents 0-13[...]

MEMO 0-14 Illustrated table of contents[...]

1 Safety — Seats, seat belts and supplemental restraint system Model "S51-D" EDITED: 2011/ 1/ 7 Seats .............................................................. 1- 2 Front seats .................................................. 1- 2 Rear seats. .................................................. 1- 5 Head restraints ................[...]

SSS0133 WARNING . Do not ride in a moving vehicle when the seatback is reclined. This can be dan- gerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and rec eive neck or other serious injuries. Y ou could also slide under the lap belt and receive serious internal injuries. . For the most effective p[...]

SSS1051 Forward and backward: Moving the switch * 1 forward or backward will slide the seat forward or backward to the desired position. Reclining: Move the recline switch * 2 backward until the desired angle is obtained. T o bring the seatback forward again, move the switch * 2 forward. The reclining feature allows adjustment of the seatback for o[...]

SSS1053 Lumbar support: The lumbar support feature provides lower back support to the driver. Push the front or bac k end of the switc h to adjust the seatbac k lumbar area. SSS0685 Side support (if so equipped): The side support feature provides thigh and torso supports. Push the switch inside * 1 or outside * 2 to adjust the thigh area. Push the [...]

REAR SEA TS WARNING . Never allow anyone to ride in the ca rgo area or on the rear seat when it is in the fold-down position. Use of these areas by passengers without proper restraints could result in seri ous injur y in an accident or sudden stop. . When returning the seatbacks to the upright position, be certain they are completely secured in the[...]

SSS0895 Folding Before folding the rear seats: Remove drink containers from the rear cup holder. T o fold down the seatbac ks: Pull the lever * A or * B and fold the seatback. Return the rear seatback manually until it securely loc ks in position. HEAD RESTRAINTS WARNING Head restraints supplement the other vehi- cle safety systems. They may provid[...]

SSS0992 Components 1. Head restraint 2. Adjustment notches 3. Lock knob 4. Stalks SSS0997 Adjustment Adjust the head restraint so the center is level with the ce nter of your ears. SSS0993 T o raise the head restraint, pull it up. Safety — Seats, seat belts and supplement al restr aint system 1-7[...]

SSS0994 T o lower, push and hold the loc k knob and push the head restraint down. SSS0995 Removal Use the following procedure to remove the adjustable head restraints. 1. Pull the head restraint up to the highest position. 2. Push and hold the loc k knob. 3. Remove the head restraint from the seat. 4. Store the head restraint properly in a secure p[...]

SSS0508 Front-seat Active Head Restraint The Active Head Restraint moves forward utilizing the force that the seatback re- ceives from the occupant in a rear-end collision. The movement of the head restraint helps support the occupant ’ s head by reducing its backward movement and helping absorb some of the forces that may lead to whiplash-type i[...]

SSS0992 Components 1. Adjustable headrest 2. Adjustment notches 3. Lock knob 4. Stalks SSS0997 Adjustment Adjust the headrest so the center is level with the center of your ears. SSS0993 T o raise the headrest, pull it up. 1-10 Safety — Seats, seat belts and supplemental restraint system[...]

SSS0994 T o lower, push and hold the loc k knob and push the headrest down. SSS0995 Removal Use the following procedure to remove the adjustable headrests. 1. Pull the headrest up to the highest position. 2. Push and hold the loc k knob. 3. Remove the headrest from the seat. 4. Store the headrest properly in a secure place so it is not loose in the[...]

SSS0901 ARMREST (if so equipped) Rear armrest Pull the tab and draw the armrest forward until it is horizontal. PRECAUTIONS ON SEA T BEL T USAGE If you are wearing your seat belt properly adjusted, and you are sitting upright and well back in your seat with both feet on the floor, your c hances of being injured or killed in an accident and/or the s[...]

SSS0136A SSS0134A WARNING . Every person who drives or rides in this vehicle should use a seat belt at all times. Children should be properly restrained in the rear seat and, if appropriate, in a child restraint. . The seat belt should be properly ad- justed to a snug fit. Failure to do so may reduce the effectiveness of the entire restraint system[...]

. Do not wear the seat belt inside out or twisted. Doing so may reduce its effec- tiveness. . Do not allow more than one person to use the same seat belt. . Never carry more people in the vehicle than there are seat belts. . If the seat belt warning light glows continuously while the ignition is turned ON with all doors closed and all seat belts fa[...]

PREGNANT WO MEN INFINITI recommends that pregnant women use seat belts. The seat belt should be worn snug, and always position the lap belt as low as possible around the hips, not the waist, and place the shoulder belt over your shoulder and across your chest. Never run the lap/shoulder belt over your abdominal area. Contact your doctor for specifi[...]

. For the most effective protection when the vehicle is in motion, the seat should be upright. Always sit well back in the seat with both feet on the floor and adjust the seat belt properly. SSS0292 Fastening the seat belts 1. Adjust the seat. (See “ SEATS ” earlier in this section.) 2. Slowly pull the seat belt out of the retractor and insert [...]

SSS0290 3. Position the lap belt portion low and snug on the hips as shown. 4. Pull the shoulder belt portion toward the retractor to take up extra slac k. Be sure the shoulder belt is routed over your shoulder and across your chest. The front passenger and rear passenger seating positions ’ three-point seat belts have two modes of operation: . E[...]

. Grasp the shoulder belt and pull forward quickly . The retractor should lock and restrict further belt movement. If the retractor does not lock during this chec k or if you have any question about seat belt operation, see an INFINITI retailer. SSS0896 Shoulder belt height adjustment (for front seats) The shoulder belt anchor height should be adju[...]

SSS0671 Rear center seat belt The center seat belt buc kle is identified by the CENTER mark. The center seat belt tongue can be fastened only into the center seat belt buc kle. SEA T BEL T EXTENDERS If, because of body size or driving position, it is not possible to properly fit the lap- shoulder belt and fasten it, an extender that is compatible w[...]

Children need adults to help prot ect them. They need to be properly restrained. In addition to the general information in this manual, child safety information is available from many other sources, includ- ing doctors, teachers, government traffic safety offices, and community organiza- tions. Every child is different, so be sure to learn the best[...]

should choose a child restraint that fits your vehicle and always follow the manu- facturer ’ s instructions for installation and use. LARGER CHILDREN Children who are t oo large for child restraints should be seated and restrained by the seat belts which are provided. The seat belt may not fit properly if the child is less than 4 ft 9 in (142.5 [...]

PRECAUTIONS ON CHILD RESTRAINTS WARNING . Failur e to follow the warnings and instructions for proper use and installa- tion of child restraints could result in serious injury or death of a child or other passengers in a sudden stop or collision: — The child re straint must be used and installed properly. Always follow all of the child restraint [...]

. Choose only a restraint with a label certifying that it complies with Federal Motor Vehicle Safety Standard 213 or Canadian Motor Vehicle Safety Stan- dard 213. . Check the child restraint in your vehicle to be sure it is compatible with the vehicle ’ s seat and seat belt system. . If the c hild restraint is compatible with your vehicle, place [...]

SSS0840 LA TCH lower anchor locat ion LA TCH lower anc hor location The LA TCH anchors are located at the rear of the seat cushion near the seatback. A label is attached to the seatback to help you locate the LATCH anchors. SSS0643 LA TCH webbing-mounted attachment Installing child restraint LA TCH lower anc hor attachments LA TCH compatible child [...]

SSS0902 T op tether anchor WARNING . If th e cargo cover ( if so equipped) contacts the top tether strap when it is attac hed to the top tether anchor, remove the cargo cover from the vehicle or secure it on the cargo floor below its attachment location. If the cargo cover is not removed, it may damage the top tether strap during a collision. Y our[...]

SSS0649 Rear-facing rigid-mounted — step 2 SSS0639 Rear-facing — ste p 3 3. For child restraints that are equipped with web bing-mounted attachments, remove any additional slack from the anchor attachments. Press downward and rearward firmly in the center of the child restraint with your hand to com- press the vehicle sea t cushion and seatback[...]

in all types of vehicles. 5. Check to make sure the child restraint is properly secured prior to each use. If the child restraint is loose, repeat steps 1 through 4. SSS0100 REAR-FACING CHILD RESTRAINT IN- ST ALLA TION USING THE SEA T BEL TS WARNING The three-point seat belt with Automatic Locking Retractor (ALR) must be used when installing a chil[...]

SSS0654 Rear-facing — ste p 2 2. Route the seat belt tongue through the child restraint and inser t it into the buck le until you hear and feel the latch engage. Be sure to follow the c hild restraint manufacturer ’ s instructions for belt routing. SSS0655 Rear-facing — ste p 3 3. Pull the shoulder belt until the belt is fully extended. At th[...]

SSS0657 Rear-facing — ste p 5 5. Remove any additional slack from the seat belt; press downward and rear- ward firmly in the center of the child restraint to compress the vehicle seat cushion and seatback while pulling up on the seat belt. SSS0658 Rear-facing — ste p 6 6. After attaching the c hild restraint, test it before you place the c hild[...]

SSS0645 Forward-fac ing web-mounted — step 2 2. Secure the child restraint anchor at- tachments to the LATCH lower anc hors. Check to make sure the LA TCH attach- ment is properly attached to the lower anchors. If the child restraint is equipped with a top tether strap, route the top tether strap and secure the tether strap to the tether anchor p[...]

SSS0647 Forward-facing — step 4 4. For child restraints that are equipped with web bing-mounted attachments, remove any additional slack from the anchor attachments. Press downward and rearward firmly in the center of the child restraint with your knee to com- press the vehicle sea t cushion and seatback while tightening the webbing of the anc ho[...]

SSS0640 Forward-f acing (front passenger seat) — step 1 Refer to all Warnings and Cautions in the “ Child safety ” and “ Child restraints ” sec- tions before installing a child restraint. Follow these steps to install a forward- facing child restraint using the vehicle seat belt in th e rea r se ats or in the front passenger seat: 1. If y[...]

SSS0651 Forward-facing — step 4 4. Pull the shoulder belt until the belt is fully extended. At this time, the seat belt retractor is in the Automatic Lock- ing Retractor (ALR) mode (child restraint mode). It reverts to Emergency Loc king Retractor (ELR) mode when the seat belt is fully retracted. SSS0652 Forward-facing — step 5 5. Allow the sea[...]

SSS0641 Forward-facing — step 8 8. After attaching the c hild restraint, test it before you place the c hild in it. Push it from side to side while holding the child restraint near the seat belt path. The child restraint should not move more than 1 inch (25 mm), from side to side. Try to tug it forward and chec k to see if the belt holds the rest[...]

SSS0902 INST ALLING TOP TETHER STRAP First, secure the child restraint with the LA TCH lower anchors (rear outboard seat- ing positions only) or the seat belt, as applicable. 1. If necess ary, raise or remove the head- rest to position the top tether strap over the top of the seatback. If the headrest is removed, store it in a secure place. Be sure[...]

LRS0453 . Check the booster seat in your vehicle to be sure it is compatible with the vehicle ’ s seat and seat belt system. . Make sure the child ’ s head will be properly supported by the booster seat or vehicle seat. The seatback must be at or above the ce nter of the c hild ’ s ears. For example, if a low back booster seat * 1 is chosen, [...]

SSS0640 1. If you must install a booster seat in the front seat, move the seat to the rear- most position. 2. Position the booster seat on the seat. Only place it in a forward-facing direc- tion. Always follow the booster seat manufacturer ’ s instructions. LRS0454 Front passenger position 3. The booster seat should be positioned on the vehicle s[...]

SSS0676 7. If the booster seat is installed in the front passenger seat, push the ignition switch to the ON position. The front passenger air bag status light may or may not illuminate depending on the size of the child and the type of booster seat used. (See “ Front passenger air bag and status light ” later in th is section.) PRECAUTIONS ON S[...]

SSS0131 SSS0132 WARNING . The front air bags ordinarily will not inflate in the event of a side impact, rear impact, rollover, or lower severity fron- tal collision. Alway s wear your seat belts to help reduce the risk or severity of injury in various kinds of accidents. . The front passenger air bag will not inflate if the passenger air bag status[...]

the seat belts. . The driver and front passenger seat belt buckles are equipped with sensors that detect if the seat belts are fastened. The Advanced Air Bag System monitors the severity of a collision and seat belt usage then inflates the air bags as needed. Failure to properly wear seat belts can increase the risk or severity of injury in an acci[...]

SSS0099 SSS0100 WARNING . Never let children ride unrestrained or extend their hands or face out of the window. Do not attempt to hold them in your lap or arms. Some examples of dangerous riding positions are shown in the illustrations. . Children may b e seve rely in jured or killed when the front air bags, side air bags or curtain and rollover ai[...]

SSS0140 SSS0162 SSS0159 WARNING Front seat-mounted side-impact supplemen- tal air bags and roof-mounted curtain side- impact and rollover supplemental air bags: . The side air bags and cur tain and rollover air bags ordinarily will not inflate in the event of a frontal impact, rear impact or lower severity side collision. Always wear your seat belt[...]

SSS0903 1. Crash zone sensor 2. Supplemental front-impact air bag modules 3. Front seat-mounted side-impact sup- plemental air bag modules 4. Occupant classification sensors (weight sensors) 5. Occupant detection system control unit 6. Roof-mounted curtain side-impact and rollover supplemental air bags 7. Roof-mounted curtain side-impact and rollov[...]

retailer to chec k the passenger seat advanced air bag system. . Unt i l you have conf irm ed wit h you r retailer that your passenger seat ad- vanced air bag is working prop er ly, position the occupants in the rear seating positions. This vehicle is equipped with the INFINITI Advanced Air Bag System for the driver and front passenger seats. This [...]

The front air bags deflate quickly after a collision. The front air bags operate only when the ignition switch is in the ON position. After pushing the ignition switch to the ON position, the supplemental air bag warn- ing light illuminates. The supplemental air bag warning light will turn off after about 7 seconds if the system is operational. SSS[...]

The purpose of the regulation is to help reduce the risk of injur y or death from an inflating air bag to certain front passenger se a t o cc u p an t s, s uch a s ch i l d r e n, b y requiring the air bag to be automatically turned OFF . The occupant classification sensors (weight sensors) are on the seat cushion frame under the front passenger se[...]

child restr aint, the seat be lts an d th e occupant are properly positioned, the system may be sensing an unoccupied seat (in which case the air bag is OFF). Y our INFINITI retailer can check that the system is OFF by using a special tool. However, until you have co nfirmed with your retailer that your air bag is workin g pro perly, reposition the[...]

the seat belt system. This may affect the front air bag system. T ampering with the seat belt system may result in serious personal injury. . Work on and around the front air bag system should be done by an INFINITI retailer. Installation of electrical equip- ment should also be done by an INFINITI retailer. T he Supp lem ental R estra int System ([...]

save lives and reduce seri ous inju ries. However, side air bags and cur tain and rollover air bags may cause abrasions or other injuries. Side air bags and curtain and rollover air bags do not provide restraint to the lower body. The seat belts should be correctly worn and the driver and passenger seated upright as far as practical away from the s[...]

SEA T BEL TS WITH PRETENSIONERS (front seats) WARNING . The pre tens ion ers can not b e reuse d after activation. They must be replaced together with the retractor and buckle as a unit. . If the vehicle becomes involved in a collision but a pretensioner i s not activated, be sure to have the preten- sioner system checked and, if neces- sary, repla[...]

SSS1016 SUPPLEMENTAL AIR BAG WARNING LABELS Warning labels about the supplemental front-impact air bag system are placed in the vehicle as shown in the illustration. SRS air bag The warning labels * 1 are located on the surface of the sun visors. SPA1097 SUPPLEMENTAL AIR BAG WARNING LIGHT The supplemental air bag warning light, displaying in the in[...]

WARNING If the supplemental air bag warning light is on, it could mean that the front air bag, side air bag, cur tain and rollover air bag and/or pretensioner syst ems will not operate in an accident. T o help avoid injury to yourself or others, have your vehicle chec ked by a retailer as soon as possible. REP AIR AND REPLAC EMENT PROCE- DURE The f[...]

MEMO Safety — Seats, seat belts and supplement al restr aint system 1-53[...]

2 Instruments and contr ols Model "S51-D" EDITED: 2011/ 1/ 7 Coc kpit ........................................................... 2- 2 Instrument panel ............................................. 2-4 Meters and gauges .......................................... 2- 5 Speedometer and odometer .......................... 2-6 T achometer ....[...]

Model "S51-D" EDITED: 2011/ 1/ 7 Cl o c k ............................................................ 2-4 7 Adjusting the time ..................................... 2- 47 Power outlet .................................................. 2-48 Storage ......................................................... 2-4 9 Cup holders ...............[...]

SIC4246 1. Outside mirror remote control switch 2. Intelligent Brake Assist (IBA) off switch (if so equipped) 3. Instrument brightness control switc h 4. Headlight, fog light and turn signal switch 5. Steering-wheel-mounted controls (left side) — For audio system — For Bluetooth ® Hands-Free Phone System (with navigation system) — For Blueto[...]

15. Electric tilting/telescopic steering wheel lever (if so equipped) 16. Manual tilting/telescopic steering wheel lever (if so equipped) 17. Center-co nsole-mounted controls — Climate cont rolled seat switc hes (if so equipped) — SNOW mode switch — Continuous Damping Control mode select switch (if so equipped) Instruments and contr ols 2-3[...]

SSI0635 1. Side ventilator 2. Paddle shifter (if so equipped) 3. Meters and gauges 4. Center ventilator 5. Center multi-function control panel — Navigation system* (if so equipped) — V ehicle information and setting buttons — Around View Monitor (if so equipped) 6. Center display 7. Clock 8. Hazard warning flasher switc h 9. Front passenger s[...]

SIC3825 1. Tac hometer 2. Warning/Indicator lights 3. Speedometer 4. Engine coolant temperature gauge 5. Dot matrix liquid crystal display/Od- ometer/twin trip odometer 6. Fuel gauge The needle indicators in the speedomete r, tachomete r, engine coolant temperature gauge and fuel gauge may move slightly after the ignition switch is pushed to the OF[...]

SIC4277 Speedometer SPEEDOMETER AND ODOMETER Speedometer The speedometer indicates vehicle speed in miles per hour (MPH) and kilometers per hour (km/h). SIC3259 Odometer/twin trip odometer Odometer/twin trip odometer The odometer * 1 and twin trip odometer * 2 are displayed on the dot matrix crystal display when the ignition switch is in the ON pos[...]

SIC3828 T ACHOMETER The tachometer indicates engine speed in revolutions per minute (RPM). Do not rev the engine into the red zone * 1 . CAUTION When engine speed approaches the red zone, shift to a higher gear or reduce engine speed. Operating the engine in the red zone may cause serious engine damage. SIC3255 ENGINE COOLANT TEMPERA TURE GAUGE The[...]

SIC3256 FUEL GAUGE The gauge indicates the approximate fuel level in the tank. The gauge may move slightly during braking, turning, acceleration, or going up or down hills. The gauge needle returns to E (Empty) after the ignition switch is pushed to the OFF position. Refill the fue l tank before the gauge registers “ E ” (Empty). The low fuel w[...]

SIC3181 When the ignition switch is pushed to the ON position, the compass display * B will indicate the direction of the vehicle ’ s heading. If the display reads “ C ” , calibr ate the compass by driving the vehicle in 3 complete circles at less than 5 MPH (8 km/h). Y ou can also calibrate the compass by driving your vehicle on your everyda[...]

SIC0611B Zone map ZONE VARIA TION CHANGE PROCE- DURE The difference between magnetic north and geographical north is known as variance. In some areas, this difference can some- times be great enough to cause false compass readings. Follow these instruc- tions to set the variance for your par ticular location if this happens: 1. Push the switch for [...]

while driving up or down a steep hill. (The compass returns to the correct compass point when the vehicle moves to an area where the geomagnetism is stabilized.) CAUTION . Do not install a ski rack, antenna, etc., which are attached to the vehicle by means of a magnet. They affect the operation of the co mpass. . When cleaning the mirror, use a pap[...]

All-Wheel Drive (AWD) warning light (AWD models)* Lane departure warning light (orange)* Intelligent Brake Assist (IBA) off in- dicator light* Anti-lock Braking System (ABS) warn- ing light Low tire pressure warning light Lane Departure Prevention (LDP) ON indicator light (green)* Master warning light Low beam indicator light Automatic transmission[...]

If any light does not come on, it may indicate a burned-out bulb or an open circuit in the electrical system. Have the system chec ked by an INFINITI retailer . Some indicators and warnings are also displayed on the dot matrix crystal display between the speedometer and tachometer. (See “ DOT MATRIX LIQUID CRYSTAL DIS- PLAY ” later in this sect[...]

or Brake warning light This light functions for both the parking brake and the foot brake systems. Parking brake indicator: When the ignition switch is in the ON position, the light comes on when the parking brake is applied. Low brake fluid warning light: When the ignition switch is in the ON position, the light warns of a low brake fluid level. I[...]

If it is not possible to turn on the system or the warning light stays on, it may indicate that the system is malfunctioning. Alth ough the veh icl e i s still driv eab le under normal conditions, have the vehicle chec ked at an INFINITI retailer. Engine oil pressure warning light This light warns of low engine oil pressure. If the light flickers o[...]

(LDP) SYSTEM ” in the “ 5. Starting and driving ” section. Low tire pressure warning light Y our vehicle is equipped with a Tire Pressure Monitoring System (TPMS) that monitors the tire pressure of all tires except the spare. The low tire pressure warning light warns of low tire pressure or indicates that the TPMS is not functioning properly.[...]

pressure warning light OFF . If the light still illuminates while driving after adjusting the tire pressure, a tire may be flat. If you have a flat tire, replace it with a spare tire as soon as possible. . When a spare tire is mounted or a wheel is replaced, the TPMS will not function and the low tire pressure warning light will flash for approxima[...]

Seat belt warning light and chime The light and chime remind you to fasten seat belts. The light illuminates whenever the ignition switch is pushed to the ON position, and will remain illuminated until the driver ’ s seat belt is fastened. At the same time, the chime will sound for about 6 seconds unless the driver ’ s seat belt is securely fas[...]

automatic selector position. In the manual shift mode, when the transmission does not shift to the selected gear du e to a tran smi ssi o n prote ctio n mode, the A T position indicator light will blink and a chime will sound. See “ AUTOMA TIC TRANSMISSION ” in the “ 5. Starting and driving ” section for further details. Front passenger air[...]

Malfunction Indicator Light (MIL) If the malfunction indicator light come s on steady or bli nks while the engine is running, it may indicate a potential emis- sion control malfunction. The malfunction indicator light may also come on steady if the fuel-filler cap is loose or missing, or if the vehicle runs out of fuel. Check to make sure the fuel-[...]

Slip indicator light This indicator will blink when the Vehicle Dynamic Control (VDC) system is operating, thus aler ting the driver that the vehicle is nearing its traction limits. The road surface may be slippery. SPORT m ode indicator light (if so equipped) The SPORT mode indicator light illuminates when the SPORT mode is turned “ ON ” . (Se[...]

SYSTEM/LANE DEPARTURE PREVENTION (LDP) SYSTEM ” in the “ 5. Starting and driving ” section for more details. SIC3827 The dot matrix liquid crystal display * 1 is located between the tachometer and the speedometer, and it displays the auto- matic transmission position indicator, the Intelligent Cruise Control (ICC) system (if so equipped), the[...]

SIC4679 Instruments and contr ols 2-23[...]

INDICA TORS FOR OPERA TION 1. Engine start operation indicator This indicator appears when the selector lever is in the P (Park) position. This indicator means that the engine will start by pushing the ignition switch with the brake pedal depressed. 2. Steering loc k release malfunc- tion indicator (if so equipped) This indicator appears when the s[...]

8. Intelligent Key battery discharge indicator This indicator appears when the Intelligent Key battery is running out of power. If this indicator appears, replace the battery with a new one. (See “ INTELLIGENT KEY BA TTERY REPLACEMENT ” in the “ 8. Maintenance and do-it-yourself ” section.) 9. Parking brake release warning This warning appe[...]

See “ CRUISE CONTROL ” in the “ 5. Starting and driving ” section for details. 18. Intelligent Cruise Control (ICC) system MAIN switch indicator (if so equipped) The indicator is displayed when the In- telligent Cruise Control (ICC) system main switch is pushed. When the main switch is pushed again, the indicator disappears. While the main [...]

Monitor, climate, audio, phone and voice recognition systems ” section.) SIC3846 Instruments and contr ols 2-27[...]

SIC3829 TRIP C OMPUTER Switches for the trip computer are located on the right side of the combination meter panel. T o operate the trip computer , push the switches as shown above. * A switch * B switch When the ignition switch is pushed to the ON position, modes of the trip computer can be selected by pushing the switch * A . Each time the switch[...]

The display is updated ever y 30 seconds. The dte mode includes a low range warning feature. If the fuel level is low, the warning is displayed on the screen. When the fuel level drops even lower, the dte display will c hange to “——” . . If the amount of fuel added is small, the display just before the ignition switch is pushed to the OFF p[...]

CUSTOMIZE: There are 4 submenus under the display menu. . BACK Select this submenu to return to the top page of the setting mode. . LANGUAGE Select this submenu to c hoose English or French for display. . UNIT Select this submenu to c hoose the unit from MPG or l/100 km. . METER EFFECT Select this submenu to turn on and off the meter/ring illuminat[...]

vibration occurs. The system helps deter vehicle theft but cannot prevent it, nor can it prevent the theft of interior or exterior vehicle compo- nents in all situations. Always secure your vehicle even if parking for a brief period. Never leave your Intelligent Key(s) in the vehicle, and always lock it when unat- tended. Be aware of your surroundi[...]

The alarm is activated by: . Unlocking the door or opening the lift gate without using the button on the Intelligent Key, the door handle request switch or the mechanical key. (Even if the door is opened by releasing the door inside lock knob, the alarm will activate.) . Opening the hood. How to stop an activated alarm The alarm will stop when a do[...]

engine will not star t, see an INFINITI retailer for INFINITI Vehicle Immobilizer System ser vice as soon as possible. Please bring all Intelligent Keys that you have when visiting an INFINITI retailer for service. WARNING In freezing temperatures the washer solu- tion may freeze on the window and obscure your vision which may lead to an accident. [...]

SIC3626 WINDSHIELD WIPER AND WASHER OPERA TION The windshield wiper and washer operates when the ignition switch is in the ON position. Push the lever down to operate the wiper at the following speed: * 1 Intermittent — intermittent operation The intermittent operation can be ad- justed by turning the knob toward * A (Slower) or * B (Faster) (if [...]

front * 2 (High) or to ward the rear * 3 (Low). . High — High sensitive operation . Low — Low sensitive operation T o turn the rain-sensing auto wiper system off, push up the lever to the OFF position, or pull down the lever to the LO or HI position. CAUTION Do not touch the rain sensor and around it when the wiper switch is in the INT position[...]

SIC3239 T o defog/defrost the rear window glass and outside mirrors, star t the engine and push the switc h * 1 on. The indicator light * 2 will come on. Push the switc h again to turn the defroster off . It will automatically turn off in approxi- mately 15 minutes. CAUTION When cleaning the inner side of the rear window, be careful not to scratch [...]

SIC3267 HEADLIGHT SWITCH Lighting * 1 T urn the switc h to the position: The front park, side marker, tail, license plate and instrument lights will come on. * 2 T urn the switc h to the position: Headlights will come on and all the other lights remain on. SIC3268 Autolight system The autolight system allows the headlights to be set so they turn on[...]

SIC2941 Be sure not to put anything on top of the photo sensor * A located on the top of the instrument panel. The photo sensor con- trols the autolight; if it is covered, the photo sensor reacts as if it is dark and the headlights will illuminate. SIC3269 Headlight beam select * 1 T o select the low beam, put the lever in the neutral position as s[...]

Daytime running light system (Ca- nada only) The daytime running lights automatically illuminate when the engine is started with the parking brake released. The daytime running lights operate with the headlight switch in the OFF position or in the position. Turn the headlight switch to the position for full illumination when driving at night. If th[...]

SIC3270 SIC3830 Instrument brightness control The instrument brightness control switch can be operated when the ignition switch is in the ON position. When the switch is operate d, th e dot ma tr ix liquid crys tal display switches to the brightness adjust- ment mode. Push the upper switch * A to brighten the instrument panel lights. The bar * 1 mo[...]

SIC3271 TURN SIGNAL SWITCH * 1 T urn signal Move the lever up or down to signal the turning direction. When the turn is com- pleted, the turn signals cancel automati- cally. * 2 Lane c hange signal T o indicate a lane change, move the lever up or down to the point where lights begin flashing. SIC3272 FOG LIGHT SW ITCH T o turn the fog lights on, tu[...]

hazard warning flasher lights are on. T h ef l a s h e rc a nb ea c t u a t e dw i t ht h e ignition switch in any position. Some state laws may prohibit the use of the hazard warning flasher switch while driving. SIC3831 T o sound the horn, push the center pad area of the steering wheel. WARNING Do not disassemble the horn. Doing so could affect p[...]

mately 60 seconds after turning the switch on or selecting the desired temperature. 4. When the vehicle ’ s interior is warmed or cooled, and/or before you leave the vehicle, be sure to turn the control knob to the OFF position (center). The indicator light * B on the control knob goes off at the OFF position. T o check the air filter for the cli[...]

Pushing the LDW switch will also turn off the Forward Collision Warning (FCW) sys- tem simultaneously. The LDW system will automatically turn on whenever the ignition switch is pushed to the “ ON ” position, even if the LDW system was previously turned off. T o keep the LDW system from turning on automatically each time the ignition switch is p[...]

SSD1156 The warning systems switch will turn on and off the Lane Departure Warning (LDW) system and the Forward Collision Warning (FCW) system at the same time. The LDW system will sound a warning chime and blink the lane departure warn- ing light (orange) to alert the driver if the vehicle is traveling close to either the left or the right of a tr[...]

SIC3848 The Continuous Damping Control optimizes the damping force and helps minimize the movement of the vehicle body. It helps stable driving when the vehicle moves up and down on large rolling roads or when the vehicle body leans during cornering with a high centrifu gal force. The damping force will automatically ad- just according to the road [...]

SIC1881 The vehicle should be driven with the V ehicle Dynamic Control (VDC) system on for most driving co nditions. If the vehicle is stuck in mud or snow, the VDC system reduces the engine output to reduce wheel spin. The engine speed will be reduced even if the accelerator is depressed to the floor. If maximum engine power is needed to free a st[...]

climate, audio, phone and voice recogni- tion systems ” section. SIC3631 Front SIC4274 C enter console SIC3835 Rear console SIC3836 Cargo area POWER OUTLET 2-48 Instruments and controls[...]

The power outlet is used for powering electrical accessories such as cellular telephones. CAUTION . The outlet and plug may be hot durin g or immediately after use. . Do not use with accessories that exceed a 12 volt, 120W (10A) power draw. Do not use double adapters or more than one electrical acc essory. . Use power outlet with the engine run- ni[...]

SIC3118 Front T o open the cup holder, push the lid * 1 . The flap will be folded down when insert- ing a large container . T o close, lower the cup holder lid and push it down lightly . T o clean the front cup holder, pull up the inside tray * 2 and remove it. The cup holder is not designed to store personal effects. SIC3837 Rear The cup holders f[...]

The heat may damage the glasses. SIC3838 GL OVE BOX WARNING Keep glove box lid closed while driving to help prevent injur y in an accident or a sudden stop. T o open the glove box, pull the handle * 1 . T o close, push the lid in until the lock latches. T o lock * 2 /unlock * 3 the glove box, use the mechanical key. For the mechanical key usage, se[...]

SIC3839 Front C ONSOLE BOX Front When the lever * A (front passenger ’ s seat side) is pulled, the upper case is available for storing some small items. When the lever * B (driver ’ s seat side) is pulled, the bottom case is available for storing some larger ones. SIC3840 Rear T o open the lid, push the button * A and pull up the lid. T o close[...]

SIC3663 CARD HOLDER Pull the sun visor down * 1 and slide a card in the card holder * A . SIC3248 C OA T HOOKS The coat hooks are equipped beside the rear personal lights. CAUTION Do not place items which are more than 2 lb (1 kg) on the hook. SIC3849 LUGGAGE HOOKS (if so equipped) WARNING . Always make sure that the cargo is properly secured. Use [...]

CAUTION Do not apply a total load of more than 22 lb (10 kg) to a single hook. SIC3850 CARGO NET (if so equipped) The cargo net helps keep packages in the cargo area from moving around while your vehicle is driven. T o install the cargo net, attach the hooks to the retainers. WARNING . Properly secure all cargo to help prevent it from sliding or sh[...]

SIC3841 CARGO C OVER (if so equipped) The cargo cover keeps the contents in the cargo area hidden from the outside. T o use the cargo cover, unfold the flap as illustrated. SIC3842 T o remove the cargo cover, 1. Return the rear seatback to the upright position. 2. Fold the flap * 1 . 3. Lift up the rear side of the cargo cover * 2 to unlatch the re[...]

SIC3865 The rear cargo cover * 1 can be removed from the lift gate. T o remove the rear cargo cover, open the lift gate then remove the clips * 2 with a suitable tool. WARNING . Never put anything on the cargo cover, no matter how small. Any object on it could cause an injury in an accident or sudden stop. . Do not leave the cargo cover in the vehi[...]

SIC3845 ROOF RACK (if so equipped) Always distribute the luggage evenly on the roof rack. Do not load more than 99 lb (45 kg) on the roof rails. Observe the maximum load limit shown on the cross- bars or roof carriers when you attac h them on the roof rails. Contact an INFINITI retailer for crossbar or other equipment information. Be caref ul that [...]

POWER WINDOWS WARNING . Make sure that all passengers have their hands, etc. inside the vehicle while it is in motion and before closing the windows. Use the window lock switch to prevent unexpected use of the power windows. . Do not leave c hildren unattended inside the vehicle. Th ey cou ld u nknowing ly activate switches or controls and be- come[...]

SIC3241 Passenger side power windo w switch The passenger side switch will open or close only the corresponding window. T o open or close the window, push down or pull up the switc h and hold it. SIC3285 Automatic operation (for front door windows or all door windows) T o fully open or close the window, com- pletely push down or pull up the switch [...]

If the windo ws do not close auto- matically If the power window automatic function (closing only) does not operate properly, perform the following procedure to initi- alize the power window system. 1. Push the ignition switch to the ON position. 2. Close the door. 3. Open the window completely by oper- ating the power window switch. 4. Pull the po[...]

SIC3243 Sunshade The sunshade will open automatically when the moonroof is opened. However, it must be closed manually. Tilting the moonroof T o tilt up, first close the moonroof, then push the UP * 1 side of the moonroof switch and release it; it need not be held. T o tilt down the moonroof, push the DOWN * 2 side. Sliding the moonro of T o fully [...]

SIC3642 T o activate or deactivate the welcome light function, perform the following procedure. Note that the function is set to disabled as the factory default setting. 1. Push the ignition switch to the ON position. 2. Open the driver ’ s side door . 3. Push the door handle request switch on the driver ’ s side door handle for more than 5 sec[...]

SIC3249 MAP LIGHTS Push the button as illustrated to turn the light on or off . SIC3250 PERSONAL LIGHTS Rear Push the button as illustrated to turn the light on or off . SIC3251 INTERIOR LIGHT CONTROL SWITCH The interior light control switch has three positions: ON, DOOR and OFF. ON position When the switc h is in the ON position * 1 the map lights[...]

position — remain on for about 15 seconds. . doors are unlocked by pushing the UNL OCK button on the Intelligent Key or door handle request switch with the ignition switch in the LOCK position — remain on for about 15 seconds. . any door is opened and then closed with the ignition switch in the LOCK position — remain on for about 15 seconds. [...]

SIC2925 When the switch is in the DOOR position * A , the light illuminates while the lift gate is opened. When the lift gate is closed, the light will turn off . When the switch is in the OFF position * B , the light will turn off. The light will turn off after 30 or 15 minutes when the lights remain illumi- nated to prevent the battery from becom[...]

code protection ” ; you will need to use a ladder to get up to the garage door opener motor to be able to access the “ smart or learn ” program button. SIC3182 1. To begin, push and hold the 2 outer HomeLink ® buttons (to clear the mem- ory) until the indicator light * A blinks (after 20 seconds). Release both but- tons. 2. Position the e nd[...]

the programmed HomeLink ® button - releasing when the device begins to activate. 5. If the indicator l ight on HomeLink ® blinks rapidly for two seconds and then turns solid, HomeLink ® has picked up a “ rolling code ” garage door opener signal. Y ou will need to proceed with the nex t steps to trai n HomeL ink ® , completing the programmin[...]

. push and hold both the HomeLink ® and hand-held transmitter buttons without interruption. . position the hand-held transmitter 2 to 5 in (50 to 127 mm) away from the HomeLink ® surface. Hold the transmit- ter in that position f or up to 15 seconds. If HomeLink ® is not pro- grammed within that time, try holding the transmitter in another posit[...]

MEMO Instruments and contr ols 2-69[...]

MEMO 2-70 Instruments and contr ols[...]

3 Pre-driving c hec ks and adjustments Model "S51-D" EDITED: 2011/ 1/ 7 Keys ............................................................... 3- 2 Intelligent Key ............................................. 3- 2 V alet hand-off ............................................. 3- 3 Doors ......................................................[...]

A key number plate is supplied with your keys. Record the key number and keep it in a safe place (such as your wallet), not in the vehicle. If you lose your keys, see an INFINITI retailer for duplicates by using the key number. INFINITI does not record any key numbers so it is very important to keep track of your key number plate. A key number is o[...]

however, wetting may damage the Intelligent Key. If the Intelligent Key gets wet, immediately wipe until it is completely dry . — Do not bend, drop or strike it against another object. — Do not place the Intelligent Key for an extended period in a place where temperatures exc eed 140 8 F (60 8 C). — Do not c hange or modify the Intelli- gent [...]

WARNING . Always have the doors locked while driving. Along with the use of seat belts, this provides greater safety in the event of an accident by helping to prevent persons from being thrown from the vehicle. This also helps keep children and others from unintentionally opening the doors, a nd will help keep out intruders. . Before opening any do[...]

SPA1814 L OCKING WITH INSIDE LOCK KNOB T o lock the door individually, move the inside lock knob to the lock position * 1 . T o unlock, move the inside lock knob to the unlock position * 2 . Be sure not to leave the Intelligent Key inside the vehicle. SPA2300 L OCKING WITH POWER DOOR L OCK SWITCH Operating the power door lock switch will lock or un[...]

2. Place the ignition switch in the ON position. 3. Within 20 seconds of performing Step 2, push and hold the power door lock switch to the position (UNLOCK) for more than 5 sec onds. 4. When activated, the hazard indicator will flash twice. When deactivated, the hazard indicator will flash once. 5. The ignition switch must be placed in the OFF and[...]

CAUTION . Be sure to carry the Intelligent Key with you when operating the vehicle. . Never leave the Intelligent Key in the vehicle when you leave the vehicle. The Intelligent Key is always communicat- ing with the vehicle as it receives radio waves. The Intelligent Key system trans- mits weak radio waves. Environmental conditions may interfere wi[...]

Intelligent Key may not function prop- erly. . Do not place the Intelligent Key for an extended period in an area where temperatures exc eed 140 8 F (60 8 C). . Do not attac h the Intelligent Key with a key holder that contains a magnet. . Do not place the Intelligent Key near equipment that produces a magnetic field, such as a TV , audio equipment[...]

SPA2326 DOOR L OCKS/UNLOCKS PRECAU- TION . Do not push the door handle request switch with the Intelligent Key held in your hand as il lustr ated. The clos e distance to the door handle will cause the Intelligent Key system to have difficulty recognizing that the Intelli- gent Key is outside the vehicle. . After locking with the door handle request[...]

SPA2779 SPA2780 When you carry the Intelligent Key with you, you can lock or unlock all doors by pushing the door handle request switch (driver ’ s or front passenger ’ s) * A or the lift gate request switch * B within the range of operation. When you lock or unlock the doors or the lift gate, the hazard indicator will flash and the horn (or th[...]

Lockout prot ection: T o prevent the Intelligent Key from being accidentally locked in the vehicle, lockout protection is equipped with the Intelligent Key system. When the driver ’ s side door is open, the doors are locked, and then the Intelligent Key is put inside the vehicle and all the doors are closed; the lock will automati- cally unloc k [...]

part of the lift gate. See “ LIFT GA TE ” later in this section. BA TTERY SA VER SYSTEM When all the following conditions are met for 60 minutes, the battery saver system will cut off the power supply to prevent battery discharge. . The ignition switch is in the ACC position, and . All doors are closed, and . The selector lever is in the P (Par[...]

TROUBLESHOOTING GUIDE Symptom Possible cause Action to take When pushing the ignition switch to stop the engine The SHIFT P warning appears on the display and the inside warning chime sounds con- tinuously or for a few seconds. The selector lever is not in the P (Park) position. Shift the selector lever to the P (Park) position. When shifting the s[...]

Symptom Possible cause Action to take When pushing the ignition switch to start the engine The Intelligent Key system warning light in the meter blinks in green. The battery c harge is low. Replace the battery with a new one. (See “ BATTERY ” in the “ 8. Main- tenance and do-it-yourself ” sec- tion.) The Intelligent Key system warning light[...]

WARNING The Intelligent Key transmits radio waves when the butt ons are pushed. The FAA advises that radio waves may affect air craft navigation and communication syst ems. Do not operate the Intelligent Key while on an airplane. Make sure the buttons are not operated unintentionally when the unit is stored for a flight. It is possible to lock/unlo[...]

* 1 LOCK button * 2 UNL OCK button * 3 Power lift gate button (if so equipped) * 4 P ANIC button HOW TO USE REMOTE KEYLESS ENTRY SYSTEM When you lock or unlock the doors or the lift gate, the hazard indicator will flash and the horn (or the outside chime) will sound as a confirmation. For details, see “ Setting hazard indicator and horn mode ” [...]

Opening/closing lift gate (if so equipped) Opening: 1. Push the power lift gate button * 3 for more than 1 second. 2. The lift gate will automatic ally open. The hazard indicator flashes 4 times and the out side chime sounds for app roxi- mately 3 seconds. Closing: 1. Push the power lift gate button * 3 . 2. The lift gate will automatic ally close.[...]

Hazard indic ator and horn mode: DOOR LOCK DOOR UNLOCK Intelligent Key system (Using door handle or lift gate request switch) HAZARD - twice OUTSIDE CHIME - twice HAZARD - once OUTSIDE CHIME - once Remote keyless entry system (Using or button) HAZARD - twice HORN - once HAZARD - once HORN - none Hazard indic ator mode: DOOR LOCK DOOR UNLOCK Intelli[...]

SPA2520 1. Pull the hood lock release handle * 1 located below the instrument panel; the hood will then spring up slightly. 2. Pull the lever * 2 up at the front of the hood with your finger tips and raise the hood. 3. When closing the hood, slowly close the hood down to latch both the right and left locks. Push the hood down to lock the hood secur[...]

SPA2529 OPERA TING MANUAL LIFT GA TE . The power door lock system allows you to lock or unlock all doors including the lift gate simultaneously . . Push the opener switch * A to unlock the lift gate and pull the opener handle to open. OPERA TING POWER LIFT GA TE (if so equipped) T o operate the power lift gate, the selector lever must be in the P ([...]

SPA2843 Power lift gate switch — Instrument panel SPA2877 Lift gate opener switch SPA2463 Power lift gate button — Intelligent Key SPA2440 Power lift gate switch — Lift gate Power open When the lift gate is fully closed, the lift gate will fully open automatically by performing one of the following opera- tions: . Pushing the power lift gate [...]

on the instrument panel. . Pushing the power lift gate button * C on the Intelligent Key for more than 1 second. . Pushing the power lift gate switch * D on the lower par t of the lift gate. The hazard flashes 4 times and the outside chime sounds when the lift gate star ts closing. NOTE: When the lift gate is closed, it remains unlocked . Manually [...]

SPA2879 SPA2880 * 1 Lift gate opener switc h * 2 Power lift gate switc h — Lift gate * 3 Power lift gate switc h — Instrument panel * 4 Power lift gate main switch Middle stop function The power lift gate can be set to stop at a mid-open range. To activate the system, perform the following proc edures. 1. Press the power lift gate main switch *[...]

gate for 3 seconds to set the user selected open position. A chime will sound when setting is successful. 7. Fully close the lift gate. The lift gate will open and stop at the user selected position. CAUTION . Do not lean against a partially opened lift gate. The lift gate may close un- expectedly and may result in personal injury. . If the vehicle[...]

AUTO CL OSURE If the lift gate is pulled down to a partl y open position, the lift gate will pull itself to the closed position. Do not apply excessive force when the auto closure is operating. Excessive force app lie d may cau se th e mecha n ism t o malfunction. CAUTION . The lift gate will automatically close from a par tly open position. T o av[...]

. Insert the mec hanical key into the door lock cylinder and turn it to the rear of the vehicle. . Push the power door lock switch to the UNL OCK position. T o lock, close the fuel-filler door securely and lock all doors by operating the door handle request switch, the LOCK button on the Intelligent Key , the mec hanical key or the power door lock [...]

SPA2524 T o remove the fuel-filler cap: 1. Turn the fuel-filler cap counterclockwise to remove. 2. Put the fuel-filler cap on the cap holder * A while refueling. T o install the fuel-filler cap: 1. Insert the fuel-filler cap straight into the fuel-filler tube. 2. Turn the fuel-filler cap clockwise until a single click is heard. SPA2831 L OOSE FUEL [...]

WARNING . Do not adjust the steering wheel while driving. Y ou could lose control of your vehicle and cause an accident. . Do not adjust the steering wheel any closer to you than is n ecessary for proper steering operation and comfort. The driver ’ s air bag inflates with great force. If you are unrestrained, leaning forward, sitting sideways or [...]

For more in formati on, see “ AUTOMATIC DRIVE POSITIONER ” later in this section. SPA2471 1. To block glare from the front, swing down the main sun visor * 1 . 2. To block glare from the side, remove the main sun visor from the center mount and swing the visor to the side * 2 . 3. Slide the sun visor * 3 in or out as needed. SUN VISORS Pre-driv[...]

SPA2447 INSIDE MIRROR Adjust the height and the angle of the inside mirror to the desired position. SPA2422A T ype A SPA2450 T ype B Automatic anti-glare type The inside mirror is designed so that it automatically changes reflection according to the intensity of the headlights of the following vehicle. The anti-glare system will be automatically tu[...]

For the HomeLink ® Universal Transc eiver operation, see “ HomeL in k ® UNIVERSAL TRANSCEIVER ” in the “ 2. Instruments and controls ” section. SPA2214 OUTSIDE MIRRORS WARNING Objects viewed in the outside mirror on the passenger side are closer than they appear. Be careful when moving to the right. Using only this mirror could cause an a[...]

SPA1732A Foldable outside mirrors CAUTION . Do not touc h the mirrors while they are moving. Y our hand may be pinched, and the mirror may malfunction. . Do not drive with the mirrors stored. Y ou will be unable to see behind the vehicle. . If the mirrors were folded or unfolded by hand, there is a chance that the mirror will move forward or backwa[...]

SIC3869 VANIT Y MIRROR T o use the front vanity mirror, pull down the sun visor and pull up the cover. The automatic drive positioner system has three features: . Entry/exit function . Seat synchroniz ation function . Memory storage ENTRY/EXIT FUNCTION This system is designed so that the driver ’ s seat and steering column will automati- cally mo[...]

Initialize entr y/exit function If the battery cable is disconnected, or if the fuse opens, the entry/exit function will not work though this function was set on before. In such a case, after connecting the battery or replacing with a new fuse, open and close the driver ’ s door more than two times after the ignition switch is turned from the ON [...]

holding the SET switch for more than 10 seconds while the ignition switch is in the AC C position. The indicator lights on the memory switches (1 and 2) will blink once when the function is canceled, and the indic ator lights will blink twice when the function is activated. Note that the indicator lights may illuminate after 5 seconds while hold in[...]

Selecting the memorized position 1. Move the selector lever to the P (Park) position. 2. Use one of the following methods to move the driver ’ s seat, the outside mirrors and the steering wheel. . Push the ignition switch to the ON p o s i t i o na n dp u s ht h em e m o r y switch (1 or 2) fully for at least 1 second. . Within 45 seconds of open[...]

MEMO Pre-driving checks and adjustments 3-37[...]

4 Monitor, climate, audio, phone and voice rec ognition systems Model "S51-D" EDITED: 2011/ 1/ 7 Safety note ..................................................... 4-2 Center multi-function control panel. ................... 4-2 How to use INFINITI controller ....................... 4-4 How to use touch screen (models with navigation syste[...]

Model "S51-D" EDITED: 2011/ 1/ 7 Steering-wheel-mounted controls for audio. ....................................................... 4-9 3 Antenna .................................................... 4-9 5 INFINITI Mobile Entertainment System (MES) (if so equipped) (for Canada) .......................... 4-9 6 Digital V ersatile Disc (DVD)[...]

WARNING . Do not d isassemble or modi fy this system. If you do, it may result in accidents, fire, or electric shock. . Do not use this system if you notice any abnormality, suc h as a froz en screen or lack of sound. Continued use of the system may result in accident, fire or electric shock. . In case you notice any foreign object in the system ha[...]

SAA1524 Models without navigation system 1. “ AUX ” button (P .4-23) 2. “ RADIO AM·FM ” band selector button (P .4-48) 3. INFINITI controller (P .4-4) 4. “ OFF ” brightness control and dis- play ON/OFF button (P .4-7) 5. “ INFO ” vehicle information button (P .4-8) 6. “ DISC ” selector button (P .4-48) 7. “ STA TUS ” status[...]

HOW TO USE INFINITI CONTROLLER Choose an item on the display using the main directional buttons * 2 (or additional directional buttons * 6 models with navi- gation system) or center dial * 3 , and push the ENTER button * 1 for operation. If you push the BACK button * 4 before the setup is completed, the setup will be canceled and/or the display wil[...]

SAA2474 Adjusting an item: T ouch the + * 1 or − * 2 button to adjust the settings. T ouch the * 3 or * 4 button to move to the previous or next item. T ouch the * 5 or * 6 button to move to the previous or next page. SAA2475 Inputting charact ers: T ouch the letter or number * 1 . There are some options available when inputting characters. . Upp[...]

SAA2143 MENU OPTIONS (models with navi- gation system) The start menu can be displayed using the menu control switch on the steering-wheel- mounted controls. 1. While the MAP or STA TUS screen is displayed, push and hold the menu control switch until the “ Menu Options ” screen appears. 2. Highlight the preferred item by tilting the menu contro[...]

HOW TO SELECT MENUS ON THE SCREEN V ehicle functions are viewed on the display screen in menus. T o select each key item, high lig ht th e prefe rre d item usin g the INFINITI controller and push the ENTER button. Whenever a menu selection is made or menu item is highlighted, different areas on the screen provide you with important information. See[...]

HOW TO USE INFO BUTTON The display screen shows vehicle and navigation (if so equippe d) in formatio n for your convenience. The information shown on the screen should be a guide to determine the condition of the vehicle. See the following for details. SAA3144 Models with navigation system SAA2145 Models without navigation system V ehicle informati[...]

SAA2479 SAA2480 Models with navigation system SAA2828 SAA2721 Models without navigation system Fuel Economy information The approximate distance to empty, aver- age fuel economy and current fuel econo- my will be displayed for reference. T o reset the average fuel economy (Avg Fuel Econ), select the “ Reset Fuel Eco ” or “ Reset ” key . If [...]

SAA2829 Models with navigation system SAA1077 Models without navigation system TIRE PRESSURE information WARNING . When a spare tire is mounted or a wheel is replaced, tire pressure will not be indicated, the TPMS will not function and the low tire pressure warning light will flash for approximately 1 minute. The light will remain on after 1 minute[...]

SAA2481 SAA2482 Models with navigation system SAA2830 SAA2722 Models without navigation system Maintenance information The mainte nance inter vals can be di s- played for the engine oil, oil filter, tire and other reminders. T o set a maintenance inter val, select a preferred item from the list. Y ou can also set to display a message to remind you [...]

SAA3003 Example The Reminder will be automatically dis- played when the specified distance has been driven and every time the ignition switch is pushed to the ACC or ON position. The reminder will not appear while driving. Select the “ OK ” key to hide the reminder for the rest of the current drive. T o stop the reminder from appearing, perform[...]

SAA2484 Models with navigation system SAA2604 Models without navigation system HOW TO USE SETTING BUTTON The display as illustrated will appear when the SETTING button is pushed. For navigation settings, refer to the sepa- rate Navigation System Owner ’ s Manual. SAA2485 Models with navigation system SAA2618 Models without navigation system Monit[...]

Audio settings The display as illustrated will appear when pushing the SETTING button and selecting the “ Audio ” key . Bass/Tr eble/Balance/Fade: T o adjust the speaker tone quality and sound balance, select the “ Bass ” , “ Treble ” , “ Balance ” or “ Fade ” key and adjust it with the INFINITI controller. T h e s ei t e m s c [...]

SAA2554 V olume and Beeps settings (models with navigation system) The display as illustrated will appear when pushing the SETTING button, selecting the “ V olume & Beeps ” key . Audio V olume: T o increase or decrease the audio volume, select the “ Audio Volume ” and adjust it with the INFINITI controller. Y ou can also adjust the audi[...]

SAA2486 Display settings (models with na- vigation system) The display as illustrated will appear when pushing the SETTING button and selecting the “ Display ” key . Display Adjustment: T o adjust the display settings, select the “ Display Adjustment ” key. The following settings are available. . Display T o turn off the screen, push the EN[...]

T o turn on the screen, set this item to the “ ON ” position or push the “ ” button. Brightness/Contrast/Bac kground Color: T o adju st the brig htness, contrast and background color of the screen, select the appro pr iat e “ Brightness ” , “ Contras t ” or “ Backgro und Color ” key a nd push the ENTER button. Y ou can then adju[...]

. Hawaii . Alaska CAMERA settings (if so equipped) The “ CAMERA ” screen will appear when pushing the SETTING button, selecting the “ Camera ” key with the INFINITI controller and pushing the ENTER button. For the details about the camera system operation, see “ REARVIEW MONITOR ” later in this section or “ Around View TM Monitor (AVM[...]

Comfort settings Models with navigation syst em The display illustrated will appear when pushing the SETTING button, selecting the “ Others ” key and then selecting the “ Comfort ” key. This key does not appear on the display until the ignition switch is pushed to the ON position. Models without navigation system The display illustrated wil[...]

SAA3007 Models with navigation system SAA3014 Models without navigation system Language & Units settings Models with navigation syst em The display illustrated will appear when pushing the SETTING button, selecting the “ Others ” key and then selecting the “ Language & Units ” key. Models without navigation system The display illust[...]

SAA2491 Image Viewer (m odels with naviga- tion system) The image files in the USB memory will be displayed. T o display the Image Viewer, push the SETTING button, select the “ Other ” key and then select the “ Image Viewer ” key. The image of the selected file is displayed on the right side of the screen. When a number of folders are inclu[...]

. (Stop) Select the “ ” key t o s top the slideshow. . (Next) Select the “ ” key to display the next file. . (Previous) Select the “ ” key to display the previous file. Setting the Image Viewer: The Image Viewer setting display will appear when selecting the “ Settings ” ke y on the full screen display. The following settings are av[...]

HOW TO USE DISC·AUX BUTTON Images being played can be switched to the center disp lay. Push the DISC·AUX (with navigation system) or AUX (without navigation system) button to perform switching. The above display will appear when the “ Menu ” key is selected using the INFINITI controller. How to use disc button (for mode ls without navigation [...]

SAA1896 HOW TO READ DISPLAYED LINES Guiding lines which indicate the vehicle width and distances to objects with re- ference to the bumper line * A are dis- played on the monitor . Distance guide lines: Indicate distances from the bumper. . Red line * 1 : approx. 1. 5 ft (0. 5 m) . Y ellow line * 2 : approx. 3 ft (1 m) . Green line * 3 : approx. 7 [...]

The vehicle width and predicted course lines are wider than the actual width and course. SAA1897 1. Visually check that the parking space is safe before parking your vehicle. 2. The rearview of the vehicle is displayed on the screen * A as illustrated when the selector lever is moved to the R (Reverse) position. SAA1898 3. Slowly back up the vehicl[...]

referring to the predicted course lines. 5. When the vehicle is parked in the space completely , move the selector lever to the “ P ” (Park) position and apply the parking brake. DIFFERENCE BETWEEN PREDICTED AND ACTUAL DIST ANCES The distance guide line and the vehicle width guide line should be used as a reference only when the vehicle is on a[...]

SAA1979 Backing up on a stee p downhill When backing up the vehicle down a hill, the distance guide lines and the vehicle width guide lines are shown fur ther than the actual distance. For example, the display shows 3 ft (1 m) to the place * A , but the actual 3 ft (1 m) distance on the hill is the place * B . Note that any object on the hill is cl[...]

SAA1980 Backing up behind a projecting object The position * C is shown further than the position * B in the display. However, the position * C is actually at the same distance as the position * A . The vehicle may hit the object when bac king up to the position * A if the object projects over the actual backing up course. SAA2606 PREDICTIVE C OURS[...]

HOW TO ADJUST SCREEN T o adjust the Display ON/OFF , Brightness, Tint, Color, Contrast and Black Level of the rearview monitor, push the SETTING button with the rearview monitor on, select the “ Display ” key on the screen and select the item key and adjust the level using the INFINITI controller . Do not adjust the Brightness, Tint, Color, Con[...]

When you push the CAMERA button or shift the selector lever into the R (Reverse) position while the ignition switc h is in the ON po sitio n, th e A round View Monitor operat es. The moni tor displ ays variou s views of the position of the vehicle. Available views: . Bird-Eye View The surrounding view of the vehicle. . Front- Side View The view aro[...]

malfunction, fire or an electric shock. . Do not strike the cameras. They are precision instruments. Doing so could cause a malfunction or cause damage resulting in a fire or an electric shock. CAUTION Do not scratch the lens when cleaning dirt or snow from the front of the camera. NOTE: The color of the view on the Around View Monitor display is d[...]

: Shift the selector lever : Select the “ Wide ” , “ Side ” or “ Top ” key on the screen. : Push the CAMERA button * A : Original screen before the Around View Monitor is operated * B : Rear view/bird ’ s-eye view screen * C : Rear view/front-side view screen * D : Rear-wide view screen * E : Front view/bird ’ s-eye view screen * F [...]

HOW TO SEE EACH VIEW WARNING . The distance guide line and the vehicle width line should be used as a reference only when the vehicle is on a paved, level surface. The distance viewed on the monitor is for reference only and may be different than the actual dis- tance between the vehicle and displayed objects. . Use the displayed lines and the bird[...]

Front and rear view Guiding lines, which indicate the vehicle width and distances to objects with re- ference to the vehicle body line * A , are displayed on the monitor . Distance guide lines: Indicate distances from the vehicle body. . Red line * 1 : approx. 1. 5 ft (0. 5 m) . Y ellow line * 2 : approx. 3 ft (1 m) . Green line * 3 : approx. 7 ft [...]

SAA1841 Bird-eye view The bird-eye view shows the overhead view of the vehicle which helps confirm the vehicle position and the predicted course to a parking spac e. The vehicle icon * 1 shows the position of the veh icle. Note tha t the size of the vehicle icon on the bird-eye view may differ somewhat from the actual vehicle. The areas that the ca[...]

when a corner of the vehicle moves closer to an object. The corner sonar indicator * 4 can be turned off. See “ AROUND VIEW MONITOR SETTINGS ” later in this section. CAUTION The turn signal light may overlap with the side-of-vehicle line. This is not a malfunc- tion. Infrared illumination: The images on the front-side view can be displayed at n[...]

SAA1978 Moving to a steep uphill When moving the vehicle up a hill, the distance guide lines and the vehicle width guide lines are shown closer than the actual distance. For example, the display shows 3 ft (1 m) to the place * A , but the actual 3 ft (1 m) distance on the hill is the place * B . Note that any object on the hill is viewed in the mon[...]

place * B . Note that any object on the hill is viewed in the monitor closer than it appears. SAA1923 Moving near a projecting object The predicted course lines * A do not touch the object in the display. However, the vehicle may hit the object if it projects over the actual moving co urse. SAA1980 Moving closer to a projecting object The position [...]

actual moving course. CAMERA AIDING C ORNER SONAR FUNCTION When the corner of the vehicle moves closer to the object while the Around View Monitor is displayed, an indicator is displayed and a tone is sounded by the corner sonar function to warn the driver. The color of the corner sonar indicator and the pattern of the tone vary according to the di[...]

SAA3649 AROUND VIEW MONITOR SETTINGS T o set up the Around View Monitor to your preferred settings, push the SETTING button, select the “ Camer a ” key and push the ENTER button. Predictive C ourse Lines: When this item is turned to ON, the predictive course line is displayed in the front and the rearview. Camera View Priority: The view shown o[...]

discoloration. T o clean the camera, wipe with a cloth that has been dampened with a diluted mild cleaning agent and then wipe with a dry cloth. . Do not damage the camera because the monitor screen may be adversely af- fected. . Do not use wax on the camera window. Wipe off any wax with a clean cloth that has been dampened with a mild detergent di[...]

WARNING . The air conditioner cooling f unction operates only when the engine is run- ning. . Do not leave children or adults who would normally require the support of others alone in your vehicle. Pets should not be left alone either. On hot, sunny days, temperatures in a closed vehicle could quickly become high enough to cause severe or possibly [...]

SAA1527 Without Advanced Climate Control System (ACCS) SAA2153 With Advanced Climate Control System (ACCS) 1. “ AUTO ” automatic climate co ntrol ON button/T emperature control dial (driver side) 2. “ A/C ” air conditioner ON/OFF button 3. “ ” fan speed increase button 4. “ ” front defroster button 5. “ MODE ” manual air flow co[...]

and fan speed after the preferred tempera- ture is set manually . 1. Push the “ AUTO ” button on. (The indicator on the button will illuminate and AUTO will be displayed.) 2. Turn the temperature control dial (dri- ver side) to set the desired tempera- ture. . The temperature can be set within the following range. — For U.S.: 60 to 90 8 F —[...]

Air recir culation: Push the intake air control button to recirculate interior air inside the vehicle. The indicator light on the “ ” side will illuminate. The air recirculation mode cannot be activated when the air conditioner is in the front defrosting mode “ ” . Outside air circulation: Push the intake air control button to draw outside [...]

SAA2734 Models with navigation system SAA2735 Models without navigation system Ion contro l: This unit generates highly concentrated Plasmacluster ions into the air blown from the ventilators and reduces odors ab- sorbed into the interior trim. When the air conditioner is turned on, the system generates Plasmacluster ions auto- matically. The amoun[...]

OPERA TING TIPS When the engine coolant temperature and outside air temperature are low, the air flow from the foot outlets may not operate. This is not a malfunction. After the coolant temperature warms up, air will flow nor- mally from the foot outlets. SAA1983 The sunload sensor * A on the instrument panel helps maintain a constant tempera- ture[...]

SERVICING CLIMA TE C ONTROL The climate control system in your INFINITI is charged with a refrigerant designed with the environment in mind. This refrigerant will not harm the earth ’ s ozone layer. However, special charging equipment and lubricant are required when servicing your INFINITI air conditioner. Using improper refrigerants or lubricant[...]

SAA0306 FM radio r eception: Range: FM range is normally limited to 25 to 30 miles (40 to 48 km), with monaural (single channel) FM having slightly more range than stereo FM. External influences may sometimes interfere with FM station reception even if the FM station is within 25 miles (40 km). The strength of the FM signal is directly related to t[...]

SAA0480 Compact Disc (CD) player . Do not force a compact disc into the CD insert slot. This could damage the CD and/or CD c hanger/player. . T rying to load a CD with the CD door closed could damage the CD and/or CD changer. . During cold weather or rainy days, the playe r ma y malfu nc tio n du e to th e humidity. If this occurs, remove the CD an[...]

normal. UNPLAY ABLE: The file is unplayable in this audio system (only MP3, WMA or AAC CD). LHA0484 DVD (Digital V ersatile Disc) player (models with navigation system) . Do not force a compact disc into the CD/DVD insert slot. This could damage the CD/DVD player. . During cold weather or rainy days, the player may malfunction due to humid- ity. If[...]

— Recordable DVDs (DVD + R, DVD + R DL) — Rewritable DVDs (DVD + RW, DVD + RW DL) . Do not use the following CD/DVDs as they may cause the CD/DVD player to malfunction. — 3.1 in (8 cm) discs — CD/DVDs that are not round — CD/DVDs with a paper label — CD/DVDs that are warped, scratc hed or have abnormal edges — This audio sys tem can o[...]

. DVD- VIDEO . DVD-AUDIO* . VIDEO-CD . CD-DA (Conventional Compact Disc) . DTS-CD * DVD-AUDIO may not be playable depend- ing on the system. USB (Universal Seria l Bus) This system suppor ts various USB memor y sticks, USB hard drives and iPod ® players. There are some USB devices which may not be supported with this system. . Make sure that t he [...]

Compressed Audio Files (MP3/ WMA/AAC/A TRAC3) Explanation of terms: . MP3 — MP3 is short for M oving Pictures Experts Group Audio Layer 3. MP3 is the most well kn own com- pressed digital audio file format. This format allows for near “ CD quality ” sound, but at a fraction of the size of normal audio files. MP3 conversion of an audio track c[...]

. The pl ayback order is the order in which the files were written by the writing software, so the files might not play in the desired order. . Music playback order of compressed audio files is as illustrated in the next figure. Monitor, climate, audio, phone and voice recognition systems 4-55[...]

Specification c hart: Supported media CD, CD-R, CD-RW, DVD-ROM (models with navigation system), DVD + R, DVD + RW, DVD + R DL, USB2.0 Supported file systems CD, CD-R, CD-RW, DVD-ROM (models with navigation system), DVD + R, DVD + RW, DVD + R DL: ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported. * Fil[...]

Folder levels Models with navigation system: Folder levels: 8, Folders: 255 (including root folder), Files: 512 (Max. 255 files for one folder) Models without navigation system: Folder levels: 8, Folders and files: 999 (Max. 255 files for one folder) T ext character number limitation Models with navigation system: 100 characters Models without navi[...]

T roubleshooting guide: Symptom Cause and Countermeasure Cannot play Check if the disc or USB device was inserted correctly. Check if the disc is scratched or dirty. Check if there is condensation inside the player, and if there is, wait until the condensation is gone (about 1 hour) before using the player. If there is a temperature increase error,[...]

Symptom Cause and Countermeasure The songs do not play bac k in the desired order. The playback order is the order in which the files were written by the writing software, so the files might not play in the desired order. Random/Shuffle may be active on the audio system or on a USB device. Monitor, climate, audio, phone and voice recognition system[...]

Compressed Video Files (models with navigation system) Explanation of terms: . DivX ® - DivX ® refers to the DivX ® codec owned by DivX, Inc. used for a lossy compression of video based on MPEG- 4. . A V I-A V Is t a n d sf o rA u d i oV i d e o Interleave. It is a standard file format originated by Microsoft Corporation. A “ .divx ” encoded[...]

Requirement for Supporting Video Play- back: Media CD, CD-R, CD-RW, DVD, DVD + R, DVD + RW, DVD + RW DL, USB 2.0 Memory File Systems CD, CD-R, CD-RW , DVD, DVD + R, DVD + RW , DVD + RW DL ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet, UDF Bridge (UDF1.02+ISO9660), UDF1.5, UDF2.0 - ISO9660 Level 3 (packet writing) is not supported. - Files saved usi[...]

. While an audio device is connected through a Bluetooth ® wireless connec- tion, the battery power of the device may discharge quicker than usual. . This system supports the Bluetooth ® Audio Distribution Profile (A2DP , AVRCP). . Bluetooth ® is a trademark owned by Bluetooth SIG, Inc. and licensed to Clarion C o., Ltd. Music Box ® Recording: [...]

SAA2724 1. ON·OFF/VOLUME control knob 2. Radio SCAN (tuning) button 3. RDM (random) RPT (repeat) play button 4. Radio CA T (category)/REW (rewind) button for SEEK/TRACK 5. FF (fast forward) button for SEEK/TRACK 6. Radio tuning / MP3/WMA/AAC folder selector / AUDIO cont rol knob 7. CD EJECT button 8. Radio station preset and buttons No satellite r[...]

SAA1533 Models with navigation system 1. AM·FM·SA T band select button 2. DISC·AUX button SAA1504 Models without navigation system 1. RADIO AM·FM band select button 2. DISC button FM-AM- SA T RADIO WITH C OMP ACT DISC (CD) PL AYER For all operation precautions, see “ AUDIO OPERA TION PRECAUTIONS ” earlier in this section. The satellite radi[...]

desired setting. For the other setting methods, see “ HOW TO USE SETTING BUTTON ” earlier in this section. This vehicle has some sound effect func- tions as follows: . Speed Sensitive V ol. For more details, see “ HOW TO USE SETTING BUTTON ” earlier in this section. Switching the display: Pushing the DISC·AUX or DISC button will switch the[...]

SCAN tuning: Push the SCAN tuning button to tune from low to high frequencies and stop at each broadcasting station/channel for 5 sec- onds. Pushing the button again during this 5 seconds period will stop SCAN tuning and the radio will remain tuned to that station/channel. If the SCAN tuning button is not pushed within 5 seconds, SCAN tuning moves [...]

. Name . Title . Other Compact Disc (CD) player operation Push the ignition switch to the ACC or ON position and insert the Compact Disc (CD) into the slot with the label side facing up. The CD will be guided automatically into the slot and start playing. After loading the CD, the number of tracks on the CD and the play time will appear on the disp[...]

CD: . Disc title . T rack title CD with compressed audio files: . Folder title . File title . Song title . Album title . Artist Next/Previous Track and Fast- Forward/Rewind: Push the FF or REW button for more than 1.5 seconds while a CD is being played to fast-forward or rewind through the track. When the button is released, the CD will return to n[...]

injury or death. CAUTION . Only operate the DVD while the vehicle engine is running. Operating the DVD for extended periods of time with the engine OFF can discharge the vehicle battery. . Do not allow the system to get wet. Excessive moisture su ch as spilled liquids may cause the system to mal- function. . While playing VIDEO-CD media, this DVD p[...]

SAA2497 Playing a DVD DISC·AUX button: Park the vehicle in a safe location for the front seat occupants to operate the DVD drive while watc hing the images. Push the DISC·AUX button on the instru- ment panel and turn the display to the DVD mode. When a DVD is loaded, it will be replayed automatically. The operation screen will be turned on when t[...]

SAA2498 Example DVD settings Select the “ Settings ” key to adjust the following settings. Key (DVD- VIDEO, DVD-AUDIO): Keys for the DVD menu operat ion are displayed. : Move the cursor to select a DVD menu. Enter: Enter the selected menu. Move: Change the display location by moving the operation key . Back: Return to the previous screen. Hide:[...]

DVD Language (D VD-VIDEO , VIDEO-CD): Select the “ DVD Language ” key to open the number entry screen. Input the number corresponding to the preferred language and select the “ OK ” key. The DVD top menu language will be ch anged to the one specified. Display: T o adjust the image quality of the screen, select the preferred adjustment items[...]

SAA2500 File selection (models with naviga- tion system) When there are both audio and movie files in the USB memory, the mode select screen is displayed. Select the preferred content to play . When there is only one type of file, the audio or movie operation screen is dis- played and starts to play . If playbac k of a video file is restricted to a[...]

When the REW button is pushed for less than 1.5 seconds after 3 seconds from when the current trac k started playing, the begin ning of the c urren t t rack will be played. The INFINITI cont roller can also be used to select tracks when the USB memory is being played. Folder selection: T o change to another folder in the USB memory, turn the folder[...]

in this list screen, and enables switch- ing to the movie playback mode. . Play Mode Select the preferred play mode. SAA2503 Movie file operation (mod els with navigation system) Park the vehicle in a safe location for the front seat occupants to operate the USB memory while watching the images. PLAY: When the DISC·AUX button is pushed with the sy[...]

Skip (Previous chapter) Select the “ ” key to skip the chapter(s) of the disc bac kward. The chapters will go back the number of times the “ ” key is selected. List: Select the “ List ” key on the movie file operation screen to display the file list. SAA2504 Example Settings: Select the “ Settings ” key to adjust the following setti[...]

BLUETOO TH ® STREAMING AUDIO (models with navigation system) Y our INFINITI is equipped with Bluetooth ® Streaming Audio. If you have a compatible Bluetooth ® device with streaming audio (A2DP profile), you can set up the wireless connection between your Bluetooth ® device and the in-vehicle audio system. This connection allows you to listen to[...]

SAA2505 Connecting procedure 1. Push the SETTING button and select the “ Bluetooth ” key. SAA2506 2. Select the “ Connect Bluetooth ” key. SAA2507 3. A confirmation screen will be dis- played. Select “ No ” . Note: Selecting “ Ye s ” will only connect the han ds fre e phone portion of a Bluetooth ® device. 4-78 Monitor, climate, au[...]

SAA3005 4. When a passkey appears on the screen, operate the compatible Bluetooth ® audio device to enter the passkey. The pairing procedure for the audio device varies according to each audio device. See the Bluetooth ® audio Owner ’ s Manual for details. When pairing is completed, the screen will return to the Bluetooth ® setup display. SAA2[...]

when the current trac k started playing, the begin ning of the c urren t t rack will be played. The INFINITI cont roller can also be used to select tracks when the Bluetooth ® audio play mode screen is shown on the display. ( “ Bluetooth audio ” will be indicated on the header of the screen.) REPEA T (RPT), RANDOM (RDM): T o change the play mo[...]

Connect ed Devices: Registered devices are shown on the list. Select a Bluetooth device from the list, the following options will be available. . Select Select “ Select ” to connect the selected device to the vehicle. If there is a different device currently connected, the selected device will replace the current device. . Edit Rename the selec[...]

*i P o d ® is a tra demar k o f A pple Inc ., registered in the U.S. and other coun- tries. Compatibility The following models are available: Models with navigation syst em: . Fifth generation iPod ® (version 1.2. 3 or later) . iPod Classic ® (version 1.1.1 or later) . First generation iPod touch ® (version 2.0.0 or later) . Second generation i[...]

. Composers . Audiobooks . Shuffle Songs The following touch-panel buttons shown on the screen are also available: . : returns to the previous screen. . : plays/pauses the music selected. Next/Previous Track and Fast- Forward/Rewind: Push the FF or REW button for more than 1.5 seco nds while a iPod ® is being played to fast-forward or rewind throu[...]

SAA2513 Models with navigation system SAA2612 Models without navigation system Recording CDs 1. Operate the audio system to play a CD. For the details of playing CDs, see “ Compact Disc (CD) player operation ” earlier in this section. 2. Select the “ Start REC ” or “ REC ” key. NOTE: . The system starts playing and record- ing the 1st t[...]

If the title information of the track being recorded is stored either on the hard drive/ flash memory or on the CD, the title is automatically displayed on the screen. For title acquisition from the hard drive/flash memory, music recognition technology and related data are provided by Gracenote ® . If a track is not recorded successfully due to sk[...]

Playing recorded songs Select the Music Box ® audio system by using one of the following methods. . Push the audio source switch on the steering wheel r epeatedly u ntil the center display changes to the Music Box ® mode. (See “ STEERING-WHEEL - MOUNTED C ONTROLS FOR AUDIO ” later in this section.) . Push the DISC·AUX or DISC button repeated[...]

SAA2516 Models with navigation system SAA2725 Models without navigation system There are some options available by selecting the “ Menu ” key on the screen during playback. Select one of the follow- ing options that are disp layed on the screen if necessary . Now Playing (models with navigation system): Displays a track list to choose a preferr[...]

. Edit Name Edit the name of the Playlist using the keypad displayed on the screen. (See “ HOW TO USE INFINITI C ONTROLLER ” earlier in this section.) . Delete Songs Delete tracks in the Playlist by selecting from the displayed song list. Play Mode (models with navigation sys- tem): Choose the preferred play mode from the following items. . Nor[...]

SAA2517 Models with navigation system SAA2438 Models without navigation system Music Box ® settings T o set the Music Box ® to your preferred settings, select the “ Menu ” key during playback, and the “ Music Box Settings ” key with the INFINITI controller, and then push the ENTER button. Music Box Used/Fre e Space: Information about “ [...]

Software, and Gracenote Servers for your own personal non-commercial use only. Y ou agree not to assign, copy, transfer or transmit the Gracenote Software or any Gracenote Data to any third par ty. YOU AGREE NOT TO USE OR EXPLOIT GRACE- NOTE DA TA, THE GRACENOTE SOFTWARE, OR GRACENOTE SERVERS, EXCEPT AS EX- PRESSL Y PERMITTED HEREIN. Y ou agree tha[...]

SAA2633 AUXILIARY INPUT JACKS (if so equipped) (for Canada) The auxiliary input jac ks are located in the center console. NTSC compatible devices such as video gam es, camcorders and portable video players can be connected to the auxiliary jacks. Compatible audio devices, such as some MP3 players, can also be connected to the system through the aux[...]

AUX Menu When the “ Menu ” key on the display is selected while in the AUX mode, the menu screen will be displayed. Display Mode: Choose the display mode from the follow- ing items. . Normal . Wide . Cinema V olume Settings (models with navigation system): Choose the volume setting from the following items. . Low . Medium . High Display (models[...]

SAA2157 Models with navigation system SAA2158 Models without navigation system 1. Audio source switc h 2. Menu control switc h (models with navigation system) or audio tuning switch (models without navigation sys- tem) 3. Back switc h 4. Volume control switch STEERING-WHEEL -MOUNTED CON- TROLS FOR AUDIO Menu control switch (models with navigation s[...]

. Tilting up/down for more than 1.5 seconds will scroll up or down through the f olders (if playing compressed audio files). . Pushing the menu control switch will show the CD Menu. DVD (models with navigation system): . Tilting up/down for less than 1. 5 seconds will scroll up or down through the tracks. . Tilting up/down for more than 1.5 seconds[...]

ANTENNA Window antenna The antenna pattern is printed inside the rear window. CAUTION . Do not place metalized film near the rear window glass or attach any metal parts to it. This may cause poor reception or noise. . When cleaning the inside of the rear window, be careful not to scratch or damage the rear wind ow antenna. Lightly wipe along the an[...]

This vehicle is equipped with the mobile entertainment system, which enables you to play a Digit al V ersati le Disc (DVD) , providing the images and sounds both in the front and rear display screens. WARNING . The driver must not attempt to operate or view the Mobile Entertainment Sys- tem (MES) while the vehicle is in motion so that full attentio[...]

CAUTION . Do not force a DVD into the slot. This could cause damage the player. . Do not use 8 cm (3.1 in) discs. Displays WARNING Park the vehicle in a safe location and apply the parking brake to view the images on the front center display screen using the DVD drive or other devices connected to the auxiliary input jacks. CAUTION . The glass scre[...]

CAUTION Do not touc h the display when it is opening or closing. SAA3106 Headphones Headphones are a wireless type and no cables are necessary. You can use them in almost all the ranges in the rear seat for listening to the sound from DVD or AUX. (It is not possible to use the headphones in the front seat.) Power ON/OFF: Push the POWER button to tu[...]

phones, or . the headphones maybe out of the range of the transmitter installed in the rear flip-down display screen. This is not a malfunction, or . the sound may be interrupted tempora- rily when there is an obstacle between the headphones and the transmitter. Remove the obstacle, such as opaque materials, hands, hair, etc. SAA2831 Remote control[...]

SAA0978 Remote controller SAA3109 Headphones Remote controller and headphones battery replacement Replace the battery as follows: 1. Open the lid. 2. Replace both batteries with new ones. . Size AA (remote control) . Size AAA (headphones) Make sure that the + and 7 ends on the batteries match the markings in- side the compartment. 3. Close the lid [...]

may be given to vehicle operation. CAUTION . Only operate the DVD while the vehicle engine is running. Operating the DVD for extended periods of time with the engine OFF can discharge the vehicle battery. . Do not allow the system to get wet. Excessive moisture su ch as spilled liquids may cause the system to mal- function. . While playing VIDEO-CD[...]

PLAYING A DVD DISC·AUX button Park the vehicle in a safe location for the front seat occupants to operate the DVD drive while watc hing the images. Insert a DVD into the CD/DVD slot with the labeled side up. The DVD will be guided automatically into the slot. T o eject the DVD, push the EJECT button. Push the AUX·DVD button on the instru- ment pa[...]

SKIP (REWIND): Select the “ ” key to skip the chapter(s) of the disc bac kward. The chapters will go back the number of times the ENTER button is pushed. T o skip the chapter(s) backward, it is also possible to push the “ ” button on the keypad of the remote controller. / Commer cial Skip: This function is only for DVD- VIDEO and DVD- VR. S[...]

Title Searc h (DVD-VIDEO): A scene that belongs to a specified title will be displayed each time the “ + ” side or “ − ” side is selected. 10 Key Searc h (DVD-VIDEO, VIDEO-CD, CD- DA): Select the “ 10 Key Search ” key and push the ENTER button to open the number entry screen. Input the number you want to search for and select the “ [...]

Joystick: Use the joystic k “ ” to select the items displayed on the rear display. ENTER button: Push the ENTER “ ” button to make the selected item complete on the rear display. BACK button: Push to go back to the previous screen or cancel the selection. Display tilt: Adjust the display angle by pushing the DISPLAY TIL T button “ ” . D[...]

“ Initialization ” using the joystick on the remote controller and push the ENTER button. The “ Execute ” key is deactivated when the picture mode settings are already in the def ault value. Color System: T o choose the color system, select from “ NTSC ” , “ PA L ” , “ PAL -60 ” , “ PA L- M ” , “ PAL- N ” or “ AUTO ”[...]

CAUTION . Keep th e ante nn a as f ar aw ay as possible from the electronic contr ol modules. . Keep the antenna wire more than 8 in (20 cm) away from the electronic control system harness. Do not route the antenna wire next to any harness. . Adjust the antenna standing-wave ratio as recommended by the manufacturer. . C onnect the ground wire from [...]

. Y ou will not be able to use a hands-free phone under the following cond itions: — Y our vehicle is outside of the tele- phone service area. — Y our vehicle is in an area where it is difficult to receive radio waves; such as in a tunnel, in an underground parking garage, behind a tall build- ing or in a mountainous area. — Y our cellular ph[...]

Bluetooth trademark: Bluetooth ® is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed to Clarion Co., Ltd. VOICE COMMANDS Y ou can use voice commands to operate various Bluetooth ® Hands-Free Phone Sys- tem features using the INFINITI Voic e Recognition system. For more details, see “ INFINITI VOIC E REC OGNITION SYSTEM (models with[...]

SAA2520 2. When a PIN code ap pears on the screen, operate the compatible Blue- tooth ® cellular phone to enter the PIN code. The connecting procedure of the cellu- lar phone varie s accordi ng to ea ch cellular phone. See the cellular phone Owner ’ s Manual for the details. Y ou can also visit www.InfinitiUSA.com/bluetooth or call INFINITI Cons[...]

SAA2522 3. Choose the method for entering the phonebo ok entr y. For this exampl e, select “ Enter Number by Keypad ” . 4. Enter the digits and select the “ OK ” key. (See “ HOW TO USE TOUCH SCREEN (models with navigation system) ” ear- lier in this section.) SAA2523 5. Select the “ Voicetag ” key to record a name to speak when usin[...]

SAA2620 Editing the Vehicle Phonebook 1. Push the button and select the “ V ehicle Phonebook ” key. 2. Select the desired entr y from the displayed list. 3. Select the “ Edit ” key . 4. Select the desired item to change. SAA2523 The following editing items are available: . Entry # Changes the displayed number of the selected entry. . Name E[...]

SAA2524 MAKING A CALL T o make a call, follow this proc edure. 1. Push the button on the steering wheel. The “ PHONE ” screen will appear on the display . 2. Select the “ Handset Phonebook ” ke y on the “ PHONE ” menu. 3. Select the desired entry from the list. 4. Confirm the correct entry by selecting for the correct number from the li[...]

SAA2525 RECEIVING A CALL When you hear a phone ring, the display will change to the incoming call mode. T o receive a call, perform one of the following procedures listed below . a) Select the “ Answer ” key. b) Push the button on the steering wheel. There are some options available when receiving a call. Select one of the following displayed o[...]

. Keypad Using the touch tone, send digits to the connected party for using services such as voicemail. . Cancel Mute This will appear after “ Mute ” is se- lected. Mute will be canceled. . Switch Call* Select “ Switch Call ” to switch caller. By selecting “ Hang up ” , you can end a call and can speak to a caller who is on hold again. [...]

. V ehicle Ringtone When this function is activated, a specific ringtone that is different from the cellular phone will sound when receiving a cal l. Auto Download When this item is activated and supported by a compatible phone, the phonebook of the hands-free phone is automatically downloaded at the same time that the hands-free phone is co nnecte[...]

TROUBLESHOOTING GUIDE The system should respond correctly to all voice co mmands without difficulty . If problems are encountered, tr y the following solutions. Where the solutions are listed by number, try eac h solution in turn, starting with number 1, until the problem is resolved. Symptom Solution System fails to interpret the com- mand correct[...]

WARNING . Use a phone after stopping your vehicle in a safe location. If you have to use a phone while driving, exercise extreme caution at all times so full attention may be given to vehicle operation. . If you find y ourself unable to devote full attention to vehicle operation while talking on the phone, pull off the road to a safe location and s[...]

. While a cellular phone is connected through the Bluetooth ® wireless con- nection, the battery power of the cellular phone may discharge quicker than usual. . If the Bluetooth ® Hands- Fre e P hone System seems to be malfunctioning, please contact an INFINITI retailer. . Some cellular phones or other devices may cause interference or a buzzing [...]

SAA2634 C ONTROL BUTTONS 1. PHONE SEND button Push the button to initiate a VR session or answer an incomi ng call. Y ou can also use the button to skip through system feedback and to enter com- mands during a call. 2. PHONE END button Push the button to cancel a VR session or end a call. VOICE RECOGNITION SYSTEM Y ou can also use the Bluetooth ® [...]

SAA2635 Giving voice comma nd: 1. Push and release the switch located on the steering wheel. SAA2574 2. A list of commands appears on the screen, and the system annou nces , “ Please say a command after the beep. Available commands are: Call, Phone- book, Recent Calls, Connect Phone or Help ” . 3. After the tone sounds and the icon on the scree[...]

the steering wheel or use the audio system volume knob while the system is making an announc ement. How to speak comma nds: The Voice Recognition System requires a certain way to speak voice commands. Speak normally and clearly in the direction of the microphone (located in front of the rearview mirror). Every digit of the number must be sp oken in[...]

selected, the voice command function is cancelled. To return to voice command mode, push the button to cancel the current operation, and then perform the first procedure of voice command. Monitor, climate, audio, phone and voice recognition systems 4-123[...]

List of voice co mmands: C OMMAND ACTION “ Call/Dial ”“ <name> ” Dials the specified <name>. “ Call/Dial ”“ Redial ” Dials the last number. “ Call ”“ <number> ” Dials the specified <number>. “ Phonebook ”“ Number ”“ <name> ” Displays the specified <name> in the phonebook. “ P[...]

SAA2575 P AIRING PROCEDURE Up to 5 cellular phones can be registered. 1. Push the button on the steering wheel. The system announces the available commands. 2. Speak: “ Connect Phone ” . The system acknowledges the command and an- nounces the next set of available commands. SAA2576 3. Speak: “ Add Phone ” . The system ac- knowledges the com[...]

SAA2578 5. The system asks the user to speak a name for the phone. Speak: “ Ye s ” . The system acknowl- edges the command and registers the cellular phone. If the name is too long or too short, the system tells the user, then prompts the user for a name again. Also, if more than one phone is connected and the name sounds too much like a name a[...]

call. 5. Once the call has ended, press the button on the steering wheel. RECEIVING A CALL When the ring tone is heard, press the button on the steering wheel. Once the call has ended, press the button on the steering wheel. NOTE: T o reject a call when the ring tone is heard, press the button on the steering wheel. SAA2581 DURING A CAL L During a [...]

SAA2582 PHONE OPERA TION Call . (a name) If there are entries stored in the Phone Book, a number associated with a name and location can be dialed. See “ Phone book registration ” in this sec- tion to learn how to store entries. When prompted by the system, say the name of the phone book entry to call. The system acknowledges the name. If there[...]

. List Names Use the List Names command to hear the names and locations registered in the phonebook. When the system acknowledges the command, the sys- tem announc es all voicetags registered in the system. Playback of the list can be stopped at any time by pressing a button on the steering wheel. The system ends the VR session. . T ransfer Entry U[...]

outgoing call. . Callbac k Use the Callback command to dial the last incoming cal l. . Help The system announces the available commands. SAA2585 Connect Phone . Add Phone Use the Pair Phone command to con- nect a compatible phone to the Blue- tooth ® Hands-Free Phone System. When asked to enter a PIN code to connect a Bluetooth ® cellular phone, [...]

delete a specific phone, all phones or listen to the list again. Once the user chooses to delete a phone or all phones, the system asks the user to confirm. NOTE: When the user deletes a phone, the associated phone book for that phone will also be delet ed. . Replace Phone Use the Replace Phone command to change the active phone. The system will li[...]

. delete call back number . Incoming . T ransfer entry . 8 pause 9 3 2 pause 7 . delete all entries . call 7 2409 . phonebook delete entr y . next entry . dial star 2 1 7 0 . yes . no . select . Missed . dial 8 5 6 9 2 . Bluetooth on . Outgoing . call 3 1902 . 9 7 pause pause 3 0 8 . cancel . call bac k number . call star 2095 . delete phone . dial[...]

when Alternate Command Mode is active, try using the Speaker Adaptation Function available in that mode. Otherwise, it is reco mm en de d tha t Al ter na te Com ma nd Mode be turned off and Standard Mode be used for the best recognition perfor- mance. For the voice commands for the navigation system, refer to the Navigation System Owner ’ s Manua[...]

SAA2531 1. Push the INFO button on the instrument panel. 2. Select the “ Others ” key . 3. Select the “ V oice Recognition ” key . 4. Select the “ User Guide ” key . 5. Select a preferred item. Y ou can skip steps 1 and 3 above if you say “ Help ” . Available items: . Getting Started Describes the basics of how to operate the INFINI[...]

V oice Reco gnition. SAA2534 Let ’ s Practice This mode helps learn how to use the INFINITI V oice Recognition system. 1. Select the “ Let ’ s Practice ” key. 2. After the message screen appears, push the TALK swi tch on th e steering wheel. 3. Speak the displayed number after the tone. The evaluation screen wil l be displayed and the resul[...]

show the message: “ System not ready. ” or a beep sounds. Before starting T o get the best recognition performance from INFINITI V oice Recognition, observe the following: . The interior of the vehicle should be as quiet as possible. Close the windows to eliminate the surrounding noises (traf- fic noise and vibration sounds, etc.), which may pr[...]

Selecting the “ Help ” key can display the detailed information of the each command. Operating tips: . Say a command after the tone. . Commands that are available are al- ways shown on the display and spoken thro ugh voice menu pr ompts . Com- mands other than those that are dis- played are not accepted. Please follow the prompts given by the s[...]

Command List Category C ommand: C ommand Action Phone Operates the Phone function Navigation Operates the Navigation function Information Displays the vehicle Information function Audio Operates the Audio function. Help Displays User Guide . Phone Command: C ommand Action Dial Number Makes a call to a spoken phone number up to 10 digits. V ehicle P[...]

. Navigation Command: C ommand Action Home Sets a route to your home that is stored in the Address Book. Address Searches for a location by the street address specified, and sets a route to the location. Places Sets a route to a facility near the current vehicle location. Address Book Searches for stored information in the Address Book. Previous De[...]

. General Commands C ommand Action Go back Corrects the last recognition result to return to the previous screen Exit Cancels V oice Recognition 4-140 Monitor, climate, audio, phone and voice recognition systems[...]

V oice command exa mples T ou s et h eI N F I N I T IV o i c eR e c o g n i t i o n function, speaking one command is some- times sufficient, but at other times it is necessary to speak two or more com- mands. As examples, some additional basic operations by voice commands are described here. For navigation system commands, see the separate Navigat[...]

SAA2536 4. Speak “ Dial Number ” . SAA2537 5. Speak “ 800 ” . Selecting the “ Manual C ontrols ” key switches the screen to the keypad to input the phone number manually. SAA2538 6. The system announces, “ Please say the next three digits or dial, or say change number. ” 7. Speak “ 662 ” . 4-142 Monitor, climate, audio, phone an[...]

SAA2539 8. The system announces, “ Please say the last four digits ” or say c hange number. 9. Speak “ 6200 ” . SAA2540 10. The system announces, “ Dial or Change Number? ” 11. Speak “ Dial ” . 12. The system makes a call to 800-662- 6200. Note: . Y ou can also speak “ 800-662-6200 ” (10 continuous digits) or “ 662-6200 ” (7[...]

SAA2167 Example 2 - Placing an international call to the phone number 011-81-111-222- 3333: 1. Push the T ALK switch located on the steering wheel. SAA2535 2. The system announces, “ Would you like to access Phone, Navigation, Informa- tion, Audio or Help? ” 3. Speak “ Phone ” . SAA2536 4. Speak “ International Call ” . 4-144 Monitor, c[...]

SAA2541 5. Speak “ 011811112223333 ” . SAA2542 6. Speak “ Dial ” . 7. System makes a call to 011-81-111- 222-3333. Note: Any digit input format is available in the International Number input proc ess. INFINITI VOICE RECOGNITION AL - TERNA TE C OMMAND MODE The following section is applicable when Alternate Command Mode is activated. When Alt[...]

SAA2529 Activating Alternate Command Mode When the Standard Mode is active, perform the following steps to switch t o the Alternate Command Mode. 1. Push the SETTING button on the instru- ment panel. 2. Highlight the “ Others ” key . 3. Highlight the “ V oice Recognition ” key . SAA2543 4 . Highlight the “ Alternate Command Mode ” key .[...]

SAA2545 5. Select a category from the list. SAA2546 6. Select an item. 7. If necessary, scroll the screen using the INFINITI controller to view the entire list. 8. Press the BACK button to return to the previous screen. Monitor, climate, audio, phone and voice recognition systems 4-147[...]

Command List Phone C ommands: C ommand Action Dial Number Makes a call to a spoke n phone number . V ehicle Phonebook Makes a call to a co ntact that is stored in the V ehicle Phonebook. Handset Phonebook Makes a call to a co ntact that is stored in the mobile phone. Call History Incoming Calls Makes a call to the incoming call number. Outgoing Cal[...]

Information C ommands: C ommand Action Fuel Economy Displays fuel economy information. Maintenance Displays maintenance information. Where am I? Displays your current location. T raffic Information T urns the traffic information system ON and OFF. Tire Pressure Displays tire pressure information. Weather Information Displays weather information. We[...]

Help C ommands: Command Action Command List Navigation Commands Displays the navigation command list. Phone Commands Displays the phone command list. Audio Commands Displays the audio command list. Information Commands Displays the information command list. Help Commands Displays the help co mmand list. User Guide Displays the User Guide. Speaker A[...]

SAA2547 Displaying user guide Y ou can confirm how to use voice com- mands by acces sing a simp lifi ed User Guide, which contains basic instructions and tutorials for several voice commands. 1. Push the INFO button on the instrument panel. 2. S el ec t th e “ Others ” ke y us in g t he INFINITI controller and push the ENTER button. 3. Highligh[...]

rectly. . When the air conditioner is in the AUTO mode, the fan speed decreases auto- matically for easy recognition. . Wait until a tone sounds before speak- ing a command. . Speak in a natural voice without paus- ing between words. SAA2167 Giving voice command 1. Push and release the TALK switch located on the steering wheel. SAA2548 2. A list of[...]

Repeat the comma nd in a clear voice. . Push the BACK button once to return to the previous screen. . If you want to cancel the command, push and hold the TALK switch for 1 second. The message “ V oice can- celed ” will be announced. . T o skip the voice guidance function and give the command immediately, press the TALK switch to interrupt the [...]

SAA2549 Speaker adaptation function (for Alternate C ommand Mode) The voice recognition system has a func- tion to learn the user ’ s voice for better voice recognition performance. The system can memorize the voices of up to three persons. Having the system learn the user ’ s voice: 1. Push the SETTING button on the instru- ment panel and sele[...]

7. Select a voice command and then push the ENTER button. The voice reco gnition system starts. SAA2552 8. The system requests that you repeat a command after a tone. 9. After the tone sounds and the icon on the screen changes from to , speak the command that the system requested. 10. When the system has recognized the voice command, the voice of t[...]

SAA2553 Speaker Adaptation function settings: Edit User Name Edit the user name using the keypad displayed on the screen. Delete V oice Data Resets the us er ’ s voice tha t the voice recognition system has learned. Continuous Learning When this item is turned to ON, you can have the system learn the voice commands in succession, without selectin[...]

TROUBLESHOOTING GUIDE The system should respond correctly to all voice commands without difficulty. If problems are encountered, follow the solutions given in this guide for the appropriate error. Where the solutions are listed by number, try eac h solution in turn, starting with number one, until the problem is resolved. Symptom/error message Solu[...]

5 Star ting and driving Model "S51-D" EDITED: 2011/ 1/ 7 Precautions when starting and driving ............... 5- 2 Exhaust gas (carbon monoxide) .................... 5- 2 Three-way catalyst ....................................... 5-2 Tire Pressure Monitoring Sys tem (TPMS) ........ 5- 3 Avoiding collision and rollover ...................[...]

Model "S51-D" EDITED: 2011/ 1/ 7 Distance control assist operation ................ 5-5 4 Forward C ollision Warning (FCW) system (if so equipped) ............................................. 5-6 4 Precautions on FCW system ........................ 5- 65 Intelligent Brake Assist (IBA) system (if so equipped) .............................[...]

WARNING . Do not leave children or adults who would normally require the support of others alone in your vehicle. Pets should not be left alone either. They could accidentally injure themselves or others through inadvertent operation of the v e h i c l e .A l s o ,o nh o t ,s u n n yd a y s , temperatures in a closed vehicle could quickly become hi[...]

CAUTION . Do not use leaded gasoline. Deposits from leaded gasoline seriously reduce the three-way catalyst ’ s ability to help reduce exhaust pollutants. . Keep your engine tuned up. Malfunc- tions in the ignition, fuel injection, or electrical systems can cause overrich fuel flow into the three-way catalyst, causing it to overheat. Do not keep [...]

. The TPMS will activate only when the vehicle is driven at speeds above 16 MPH (25 km/h). Also, this system may n o td e t e c ta s u d d e n d r o pi nt i r e pressure (for example a flat tire while driving). . The low tire pressure warning light does not automatically turn off when the tire pressure is adjusted. After the tire is inflated to the[...]

specified by INFINITI could affect the proper operation of the TPMS. . Do not inject any tire liquid or aerosol tire sealant into the tires, as this may cause a malfunction of the tire pressure sensors. CAUTION . The TPMS may not function properly when the wheels are equipped with tire chains or the wheels are buried in snow. . Do not place metaliz[...]

collisions and rollovers. In a rollover crash, an unbelted or improperly belted person is significantly more likely to be injured or killed than a person properly wearing a seat belt. ON-P AVEMENT AND OFF-ROAD DRIVING PRECAUTIONS Utility vehicles have a significantly higher rollover rate than other types of vehicles. They have higher ground clearan[...]

below. Please note that this procedure is only a general guide. The vehicle must be driven as appropriate based on the condi- tions of the vehicle, road and traffic. WARNING The following actions can increase the chance of losing control of the vehicle if there is a sudden loss of tire air pressure. Losing control of the vehicle may cause a collisi[...]

passengers in pos ition whe n drivi ng over rough te rrain. . Do not drive across steep slopes. Instead drive either straight up or straight down the slopes. Off-road vehicles can tip over sideways much more easily than they can forward or backward. . Many hills are too steep for any vehicle. If you drive up them, you may stall. If you drive down t[...]

pected vehicle movement which could result in seri ous vehi cle dam ag e or personal injury. (AWD models) . When a wheel is off the ground due to an unlev el surface, do not spin the wheel excessively . . Accelerating quickly, sharp steering maneuvers or sudden braking may cause loss of control. . If at all possible, avoid sharp turning maneuvers, [...]

SSD0436 OPERA TING RANGE FOR ENGINE ST ART FUNCTION The Intelligent Key can only be used for starting the engine when the Intelligent Key is within the specified operating range * 1 . When the Intelligent Key battery is almost discharg ed or strong radio waves are present near the operating location, the Intelligent Key system ’ s operating range[...]

The ignition lock is designed so that the ignition switch position cannot be switched to LOCK until the selector lever is moved to the P (Park) position. When the ignition switch cannot be pushed toward the L OCK position, proceed as follows: 1. Move the selector lever into the P (Park) position. 2. Push the ignition switch to the OFF position. The[...]

switch for more than 2 seconds. SSD0731 INTELLIGENT KEY BA TTERY DIS- CHARGE If the batter y of the Intelligent Key is almost discharged, the guide light * A of the Intelligent Key por t blinks and the indicator appears on the dot matrix liquid crystal display. (See “ DO T MA TRIX LIQUID CRYST AL DISPLAY ” in the “ 2. Instruments and controls[...]

. Make sure the area around the vehicle is clear. . Check fluid levels suc h as engine oil, coolant, brake fluid and window washer fluid as frequently as possible, or at least whenever you refuel. . Check that all windows and lights are clean. . Visually inspect tires for their appear- ance and condition. Also chec k tires for proper inflation. . L[...]

5. To stop the engine, shift the selector lever to the P (Park) position and push the ignition switc h to the OFF position. AUTOMA TIC TRANSMISSION 7 speed automatic transmission The automatic transmission in your vehicle is electronically controlled by a transmis- sion control module to produce maximum efficiency and smooth operation. Shown on the[...]

CAUTION . When stopping the vehicle on an uphill grade, do not hold the vehicle by depressing the accelerator pedal. The foot brake should be used for this purpose. . Do not downshift abruptly on slipper y roads. This may ca use a loss of contr ol. SSD0774 Selector lever Shifting T o move the selector lever, : Push the button while depressing the b[...]

CAUTION Use this position only when the vehicle is completely stopped. R (Reverse): Use this position to back up. Always be sure the vehicle is completely stopped before selecting the R (Reverse) position. The brake pedal must be depressed and the selector lever button pushed in to move the selector lever from the P (Park) position, the N (Neutral)[...]

When canceling the manual shift mode, return the selector lever to the D (Drive) position. The transmission returns to the normal driving mode. When you pull the paddle shifter while in the D (Drive) position, the transmission will shift to the upper or lower range tempora- rily. The transmission will automatically return to the D (Drive) position [...]

SSD0775 Shift loc k release If the batter y charge is low or discharged, the selector lever may not be moved from the P (Park) position even with the brake pedal depressed and the selector lever button pushed. T o move the selector lever, perform the following procedure: 1. Push the ignition switch to the OFF or LOCK position. 2. Apply the parking [...]

SPA2331 T o apply: Fully depress the parking brake pedal * 1 . T o release: 1. Firmly apply the foot brake * 2 . 2. Depres s the park ing brake peda l * 1 and the parking brake will be released. 3. Before driving, be sure the brake warning light goes out. The Lane Departure Warning (LDW) sys- tem/Lane Depar ture Prevention (LDP) sys- tem will opera[...]

SSD1182 T ype B The LDW and LDP systems monitor the lane markers on the traveling lane using the camera unit * 1 located above the inside mirror. When the camera unit detects that the vehicle is traveling close to either the left or the right of the traveling lane, the lane departure warning light * 2 on the instrument panel blinks in orange and a [...]

. On roads where there are sharp cur ves. . On roads where there are sharply contrasting objects, such as shadows, snow, water, wheel ruts, seams or lines remaining after road repairs. (The LDW system could detect these items as lane markers.) . On roads where the traveling lane merges or separates. . When the vehicle ’ s traveling direction does[...]

suspends operation. It will become oper- able again approximately 2 seconds after the lane c hange signal is turned off. When the vehicle speed lowers to less than approximately 43 MPH (70 km/h), the LDW system will not provide a warning. The LDW system has an automatic setting mode and a manual setting mode. The setting mode can be changed. In the[...]

and do not use the LDP system: — During bad weather (rain, fog, snow, wind, etc.). — When driving on slipper y roads, such as on ice or snow, etc. — When driving on winding or uneven roads. — When there is a lane closure due to road repairs. — When driving in a makeshift lane. — When driving on roads where the lane width is too narrow .[...]

SSD0672 LDP ON indicator light (green)/ Warning light (orange) LDP system operation The LDP system provides a lane departure warning and brake control assistance when the vehicle is driven at speeds of approxi- mately 43 MPH (70 km/h) and above. When the vehicle approaches either the left or the right side of the traveling lane, a warning chime wil[...]

be individually set to on or off on the display. If the system is set to off, the system will not turn on even if the LDP switch or dynamic driver assistance switch is pushed to on. To set the system to on or off on the display, see “ Setting LDP system to ON/OFF ” later in this section. SSD0884 SSD0885 Setting LDP system to ON/OFF: 1. Push the[...]

SSD0886 3. To set the LDP system to on or off, highlight the “ Lane Departure Preven- tion ” key, select ON or OFF and push the ENTER * 2 button. If both the LDP and DCA systems are set to OFF on the display, when the LDP switch or dynamic driver assistance switch is pushed, the LDP ON indicator light and the Distance Control Assist (DCA) syste[...]

again to turn the LDP system back on. T emporary disabled status at high tem- perature: If the vehicle is parked in direct sunlight under high temperature conditions (over approximately 104 8 F (40 8 C)) and then the LDP system is turned on, the LDP system may be deactivated automatically. The LDP ON indicator (green) will blink. When the interior [...]

PRECAUTIONS ON CRUISE CONTROL . If the cruise control system malfunc- tions, it will cancel automatically . The SET indicator on the dot matrix cr ystal display will then blink to warn the driver. . If the engine coolant temperature be- comes excessively high, the cruise control system will be canceled auto- matically. . If the SET indicator blinks[...]

T o set cruisin g s peed, accelera t e yo ur vehicle to the desired speed, push the SET/COAST sw it ch and relea se it. (The CRUISE SET indicator will come on in the instrument panel.) T ake your foot off the accelerator pedal. Y our vehicle will main- tain the set speed. . T o pass another vehicle, depress the accelerator pedal. When you release t[...]

The Intelligent Cruise Control (ICC) system maintains a selected distance from the vehicle in front of you within the speed range of 0 to 90 MPH (0 to 144 km/h) up to the set spee d. The set spe ed can be selected by the driver between 20 to 90 MPH (32 to 144 km/h). The vehicle travels at a set speed when the road ahead is clear. The IC C system ca[...]

SSD0913 1. Vehicle-to-vehicle distance control mode 2. Conventional (fixed speed) cruise con- trol mode Push the MAIN switch * A to choose the cruise control mode between the vehicle- to-vehicle distance control mode * 1 and the conventional (fixed speed) cruise con- trol mode * 2 . T o choose the vehicle-to-vehicle distance control mode * 1 , quic[...]

SSD0738 PRECAUTIONS ON VEHICLE-TO- VE- HICLE DIST ANCE CONTROL MODE The system is intended to enhance the operation of the vehicle when following a vehicle traveling in the same lane and direction. If the distance sensor * A detects a slower moving vehicle ahead, the syste m wil l reduce the vehicle speed so that your vehicle follows the vehicle in[...]

— On roads where the traffic is heavy or there are sharp curves — On slippery road surfaces such as on ice or snow , etc. — During bad weather (rain, fog, snow, etc.) When the windshield wiper is oper- ated at the low speed (LO) or high speed (HI) position, the Intelligent Cruise C ontrol system is automati- cally canc eled. — When strong l[...]

detects the signals returned from th e reflectors on a vehicle ahead. Therefore, if the sensor cannot detect the reflector on the vehicle ahead, the IC C system may not maintain the selected distanc e. The following are some conditions in which the sensor cannot detect the signals: . When the reflector of the vehicle ahead is positioned high on the[...]

moved out from its lane of travel, the vehicle-to-vehicle distance control mode accelerates and maintains vehi- cle speed up to the set speed. The ICC system does not control vehicle speed or warn you when you approach stationary and slow moving vehicles. You must pay attention to vehicle operation to maintain proper distance from vehicles ahead wh[...]

SSD0253 When driving on some roads, suc h as winding, hilly, cur ved, narrow roads, or roads which are under construction, the ICC sensor may detect vehicles in a different lane, or may temporarily not detect a vehicle traveling ahead. This may cause the ICC system to decelerate or accelerate the vehicle. The detection of vehicles may also be affec[...]

SSD0914 Intelligent cruise control switch The system is operated by a MAIN switch and four control switches, all mounted on the steering wheel. 1) RESUME/AC CELERA TE switch: Resumes set speed or increases speed incrementally. 2) SET/COAST switch: Sets desire d cruise speed, reduces speed incrementally . 3) CANCEL switch: Deactivates the system wit[...]

5) Set vehicle speed indic ator: Indicates the set vehicle speed. For Cana dian models, the sp ee d is displayed in km/h. 6) Intelligent Cruise Control system warn- ing light (orange): The light comes o n if there is a malfunction in the IC C system. SSD0607 When the ignition switch is pushed to the ON position, the indicators come on as illustrate[...]

SSD0916 T o set cruisin g s peed, accelerat e yo ur vehicle to the desired speed, push the SET/COAST switc h and release it. (Vehicle ahead detection indicator, set di stance indicator and set vehicle speed indicator come on.) T ake your foot off the accelerator pedal. Y our vehicle will maintain the set speed. SSD0784 When the SET/COAST switch is [...]

SSD0614 When the SET/COAST switch is pushed under the following conditions, the system cannot be set. A warning chime will sound and the ICC indicators will blink. . When the SNOW mode switch is ON (To use the IC C system, turn off the SNOW mode switch, push the MAIN switch to turn off the ICC and reset the ICC switch by pressing the MAIN switch ag[...]

SSD0610 1. System set display with vehicle ahead 2. System set display without vehicle ahead System operation WARNING Normally when controlling the distance to a vehicle ahead, this system automatically accelerate s or decelerates your vehicle according to the speed of the vehicle ahead. Depress the accelerator to properly accel- erate your veh icl[...]

the IC C system is in operation, the system controls the distance to that vehicle. When a vehicle is no longer detected under approxi matel y 15 MPH (24 km/h) , the system will be can celed. SSD0611 When passing another vehicle, the set speed indicator will flash when the vehicle speed exceeds the set speed. The vehicle detect indicator will turn o[...]

T o reset at a slower cruising speed, use one of the following methods: . Lightly tap the brake pedal. When the vehicle attains the desired speed, push the SET/C OAST switch and release it. . Push and hold the SET/C OAST switch. The set vehicle speed will decrease by approximat ely 5 MPH (5 km/h for Canada). . Push, then quickly release the SET/ CO[...]

SSD0613C . The distance to the vehicle ahead will change according to the vehicle speed. The higher the vehicle speed, the longer the distance. . If the engine is stopped, the set distance becomes “ long ” . (Each time the engine is star ted, the initial setting becomes “ long ” .) Approach warning If your vehicle comes closer to the vehicl[...]

SSD0284A NOTE: The approach warning chime may sound and the system display may blink when the ICC sensor detects some reflectors * A which are fitte d on vehicles in other lanes or on the side of the road. This may cause the IC C system to decelerate or accelerate the vehicle. The ICC sensor may detect these reflectors when the vehicle is driven on[...]

SSD0614 Warning light and display Condition A: Under the following conditions, the Intelli- gent Cruise Control system is automatically canceled. The chime will sound and the system will not be able to be set. . When the VDC system is turned off . When the VDC or ABS (including the traction control system) operates . When a tire slips . When the SN[...]

SSD0621 Condition C: When the ICC system is not operating properly, the chime sounds and the system warning light (orange) will come on. Action to take: If the warning light comes on, park the vehicle in a safe place. Turn the engine off, restart the engine, resume driving and set the IC C system again. If it is not possible to set the system or th[...]

INFINITI retailer. . Do not attac h a stick er (including transparent material) or install an accessory near the sensor. This could cause fai lure or malfunction. C ONVENTIONAL (FIXED SPEED) CRUISE CONTROL MODE This mode allows driving at a speed between 25 to 90 MPH (40 to 144 km/h) without keeping your foot on the accel- erator pedal. WARNING . I[...]

SSD0618 Conventional (fixed speed) cruise control mode display and indica- tors The display is located between the speed- ometer and tac hometer. 1) MAIN switch indicator: Indicates that the MAIN switch is ON. 2) Cruise set switc h indicator: Displays while the vehicle speed is controlled by the conventional (fixed speed) cruise control mode of the[...]

the MAIN switch again will turn the system completely off. When the ignition switch is pushed to the OFF position, the system is also automati- cally tu rned off. T o use the Intell igent Cruise Control again, quickly push and release the MAIN switch (vehicle-to-vehicle distance control mode) or push and hold it (conventional cruise control mode) a[...]

b) Push and hold the SET/C OAST switch. Release the switch when the vehicle slows down to the desired speed. c) Push, then quickly release the SET/ COAST switch. Each time you do this, the set speed will decrease by about 1 MPH (1.6 km/h). T o resume the preset speed, push and release the RESUME/ACCELERA TE switch. The vehicle will resume the last [...]

The Distance Control Assist (DCA) system brakes and moves the accelerator pedal upward according to the distance from and the relative speed of the vehicle ahead to help assist the driver to maintain a following distance. WARNING . Always drive carefully and attentively when using the Distance Control Assist system. Read and understand the Own- er [...]

T h ed e t e c t i o nr a n g eo ft h es e n s o ri s approximately 390 ft (120 m) ahead. WARNING . This system is only an aid to assist the driver and is not a collision warning or avoidance device. It is the driver ’ s responsibility to stay alert, drive safely and be in control of the vehicle at all times. . This system will not adapt automati[...]

SSD0738 DIST ANCE CONTROL ASSIST OP- ERA TION Always pay attention to the operation of the vehicle and be re ady to ma nuall y decelerate to maintain the proper following distance. The Distance Control Assist (DCA) system may not be able to decelerate the vehicle under some circumstanc es. The DCA system uses a sensor * A located on the front of th[...]

must pay attention to vehicle operation to maintain proper distance from vehicles ahead. SSD0252 The detection zone of the sensor is limited. A vehicle ahead must be in the detection zone for the system to operate. A vehicle ahead may move outside of the detection zone due to its position within the same lane of travel. Motorcycles may not be detec[...]

SSD0253 When driving on some roads, suc h as winding, hilly, cur ved, narrow roads, or roads which are under construction, the sensor may detect vehicles in a different lane, or ma y te mporar ily not de tect a vehicle traveling ahead. This may cause the system to work inappropriately. The detection of vehicles may also be affected by vehicle opera[...]

malfunction in the DCA system. SSD1183 Operating Distance Control Assist (DCA) system T o turn on the DCA system, push the DCA switch or dynamic driver assistance switch on the steering wheel after starting the engine. The Distance Control Assist (DCA) system switch indicator light in the dot matrix liquid cr ystal display will illuminate. Push the[...]

SSD0884 SSD0885 Setting DCA syst em to ON/OFF: 1. Push the SETTING * 1 button and high- light the “ Driver Assistance ” key on the display using the INFINITI controller. Then push the ENTER * 2 button. 2. Highlight the “ Dynamic Assistance set- tings ” k e y ,a n dp u s ht h eE N T E R * 2 button. SSD0886 3. To set the DCA system to on or o[...]

SSD0771 Under the following conditions, the Dis- tance Control Assist system will not oper- ate and the Distance Control Assist (DCA) system switch indicator light will blink: . When the SNOW mode switch is ON (To use the DCA system, turn off the SNOW mode switch, then turn on the DCA switch or dyn amic driver assistance switch.) For details about [...]

SSD0746 1. System set display with vehicle ahead 2. System set display without vehicle ahead System operation WARNING The Distance Control Assist system auto- matically decelerates your vehicle to help assist the driver to maintain a following distance from the vehicle ahead. Manually brake when deceleration is requir ed to maintain a safe distance[...]

brake pedal. The stoplights of the vehicle come on and the brake pedal depresses when braking is performed by the DCA system. When the brake operates, a noise may be heard. This is not a malfunction. WARNING . When the vehicle ahead detection in- dicator light is not illuminated, system will not control or warn the driver. . Never place your foot u[...]

SSD0284A NOTE: The approach warning chime may sound and the system display may blink when the sensor detects some reflectors * A which are fitte d on vehicles in other lanes or on the side of the road. This may cause the DCA system to operate inappropriately . The sensor may detect these reflectors when the vehicle is driven on winding roads, hilly[...]

. When driving into a strong light (i.e., sunlight) Action to take: When the conditions listed above are no longer present, turn the system off with the DCA switch or dynamic driver assistance switch. Turn the DCA system back on to use the system. SSD0772 Condition B: When the sensor window is dirty, making it impossible to detect a vehicle ahead, [...]

conditions, have the vehicle checked at an INFINITI retailer. Sensor maintenance How to handle the sensor: The sensor for the DCA system is common with Intelligent Cruise Control and is located below the front bumper. T o handle the sensor, see “ INTELLIGENT CRUISE C ONTROL (ICC) SYSTEM (FULL SPEED RANGE) ” earlier in this section. The Forward [...]

SIC3832 FCW/LDW switch SSD1156 Warning systems switch The FCW system uses the distance sensor * A located below the front bumper to measure the distance to the vehicle ahead. When the system judges that your vehicle is getting close to the vehicle ahead in the travel lane, the vehicle ahead detection indicator light on the instrument panel blinks a[...]

fog, snow, etc.). — When snow or road spray from traveling vehicles is splashed. — When dense exhaust or other smoke (black smoke) from vehicles reduces the visibility of the sensor. — When excessively heavy baggage is loaded in the rear seat or the luggage room of your vehicle. — When abruptly accelerating or decel- erating. — On a steep[...]

SIC3832 FCW/LDW switch SSD1156 Warning systems switch FCW system operation The FCW system will function at speeds of approx imate ly 10 MPH (15 km/h) an d above, when the system turns on. The FCW system has an automatic setting mode and a manual setting mode to turn the system on. The setting mode can be changed. In the automatic setting mode, the [...]

The Intelligent Brake Assist (IBA) system warns the driver by a warning light and chime when there is a risk of a collision with the vehicle ahead in the traveling lane and the driver must take avoidance action immediately. The system helps reduce the rear-end collision speed by applying the brakes when the system judges that the collision cannot b[...]

— Oncoming vehicles in the same lane . The system will not detect another vehicle under the following conditions: — When the sensor gets dir ty and it is impo ssib le to detect the di sta nce from the vehicle ahead. — When driving into a strong light (i.e., sunlight) . The sensor generally detects the signals returned from the reflectors on a[...]

SSD0782 Reflectors on the road WARNING . The system may detect highly reflective objects such as reflectors, signs, white markers and other stationary objects on the road or near the traveling lane. In extreme conditions, detection o f these objects may cause the system to function. . The system is designed to automatically chec k the sensor ’ s [...]

SSD0748 IBA system operation The IBA system will function when your vehicle is driven at speeds of approxi- mately 10 MPH (15 km/h) or above, and when the vehicle ’ s speed is approximately 10 MPH (15 km/h) faster than that of the vehicle ahead. T o turn the system off/on, push and hold the IBA OFF switch * B for more than 1 second after starting[...]

. Accelerate slowly and smoothly. Main- tain cruising speeds with a constant accelerator position. . Drive at moderate speeds on the high- way. . Avoid unnecessary stopping and brak - ing. Keep a safe distance behind other vehicles. . Select a gear range suitable to road conditions. . Avoid unnecessary prolonged engine idling. . Keep your engine tu[...]

If an y malf unct ion occur s in th e AWD system while the engine is running, the warning light will co me on. The warning light may blink rapidly (about twice per second) while trying to free a stuck vehicle due to high power train oil temperature. The driving mode may change to two-wheel drive. If the warning light blinks rapidly during operation[...]

SD1006MA WARNING . Do not stop or park the vehicle over flammable materials such as dry grass, waste paper or rags. They may ignite and cause a fire. . Never leave the engine running while the vehicle is unatt ended. . Do not leave c hildren unattended inside the vehicle. Th ey cou ld u nknowing ly activate switches or controls. Unat- tended c hild[...]

WARNING If the engine is not running or is turned off while dri ving, the powe r ass ist for the steering will not work. Steering will be harder to operate. The power assisted steering uses a hy- draulic pump, driven by the engine, to assist steering. If the engine stops or the drive belt breaks, you will still have control of the vehicle. However,[...]

BRAKING PRECAUTIONS The brake system has two separate hy- draulic circuits. If one circuit malfunctions, you will still have braking at two wheels. Y ou may feel a small click and hear a sound when the brake pedal is fully depressed slowly. This is not a malfunction and indicates that the brake assist mechanism is operating properly . V acuum assis[...]

BRAKE ASSIST When the force applied to the brake pedal exceeds a certain level, the Brake Assist is activated generating greater braking force than a conventional brake booster even with light pedal force . WARNING The Brake Assist is only an aid to assist braking operation and is not a collision warning or avoidance device. It is the driver ’ s [...]

all times. . As there is a performance limit to the Preview Function, never rely solely on this system. This system does not correct careless inattentive or absent- minded driving, or overcome poor visi- bility in rain, fog, or other bad weather. Reduce vehicle speed by depressing the brake pedal, in order to maintain a safe distance between vehicl[...]

How to handle the sensor The sensor for the Preview Function is common with Intelligent Cruise Control and is located below the front bumper. T o keep the Preview Function operating properly, be sure to observe the following: . Always keep the sensor clean. Wipe with a soft cloth carefully so as not to damage the sensor. . Do not strike or damage t[...]

hear a “ clunk ” noise and/or feel a pulsa- tion in the brake pedal. This is normal and does not indicate a malfunction. If the computer senses a malfunction, it switches the ABS off and illuminates the ABS warning light on the instrument panel. The brake system then operates normally, but without anti-loc k assistance. If the ABS warning light[...]

occurs. All other VDC functions are off and the indicator will not flash. The VDC system is automatically reset to on when the ignition switch is placed in the OFF position then bac k to the ON position. The computer has a built-in diagnostic feature that tests the system each time you start the engine and move the vehicle forward or in reverse at [...]

The Rear Active Steer system is an electro- nically controlled four-wheel steering sys- tem. The angle of the rear wheels are adjusted by the Rear Active Steer system, depending on the vehicle speed and steering angle. The rear wheels are designed to turn momentarily in the opposite direction and then change to the same direction as the front wheel[...]

“ ENGIN E COOLIN G SYSTEM ” in th e “ 8. Maintenance and do-it-yourself ” section. TIRE EQUIPMENT SUMMER tires have a tread designed to provide superior performance on dry pave- ment. However, the performance of these tires will be substantially reduced in snowy and icy conditions. If you operate your vehicle on snowy or icy roads, INFINITI[...]

ENGINE BL OCK HEA TER (if so equipped) Engine block heaters are used to assist in cold temperature starting. The engine block heater should be used when the ou tside te mpe ratu re is 20 8 F ( − 7 8 C) or lower. T o use the engine block heater 1. Turn the engine off. 2. Open the hood and unwrap the engine block heater cord. 3. Plug the engine blo[...]

MEMO Starting and driving 5-85[...]

MEMO 5-86 Starting and driving[...]

6 In case of emergency Model "S51-D" EDITED: 2011/ 1/ 7 Roadside assistance program ........................... 6-2 Emergency engine shut off ............................... 6- 2 Flat tire ........................................................... 6- 2 Tire Pressure Monitoring Sys tem (TPMS) ........ 6- 2 Changing a flat tire ...........[...]

In the event of a roadside emergency, Roadside Assistance Service is available to you. Please refer to your Warranty Informa- tion Booklet (U.S.) or Warranty & Roadside Assistance Information Booklet (Canada) for details. T o shut off the engine in an emergency situation while driving perform the follow- ing procedure: . Rapidly push the push-b[...]

maneuvers or abrupt braking, reduce vehicle speed, pull off the road to a safe location and stop the vehicle as soon as possible. Driving with under-inflated tires may permanently damage the tires and increase the likelihood of tire fail- ure. Serious vehicle damage could occur and may lead to an accident and could result in serious personal injury[...]

MCE0001A Blocking wheels Place suitable blocks * 1 at both the front and bac k of the wheel diagonally opposite the flat tire to prevent the vehicle from moving when it is jacked up. WARNING Be sure to block the wheel as the vehicle may move and re sult in personal injury. SCE0766 Getting the spar e tire and tools 1. R e m o v e t h e c a r g o c o[...]

necessary to work under the vehicle, support it with safety stands. . Use only the jack provided with your vehicle to lift the vehicle. Do not use the jack provided with your vehicle on other vehicles. The jack is designed for lifting only your vehicle during a tire change. . Use the correct jack-up points. Never use any other part of the vehicle f[...]

SCE0504 2. Loosen each wheel nut one or two turns by turning counterclockwise with the wheel nut wrench. Do not remove the wheel nuts until the tire is off the ground. 3. Carefully raise the vehicle until the tire clears the ground. T o lift the vehicle, securely hold the jack lever and rod with both hands as shown above. Remove the wheel nuts, and[...]

4. Lower the vehicle slowly until the tire touches the ground. Then, with the wheel nut wrench, tighten the wheel nuts securely in the sequence as illustrated. Lower the vehicle comple- tely. WARNING . Incorrect wheel nuts or improper ly tightened wheel nuts can cause the wheel to become loose or come off. This could cause an accident. . Do not use[...]

T o start your engine with a booster battery, the in structions and precaut ions below must be followed. WARNING . If done incorrectly, jump star ting can lead to a battery explosion, r esulting in severe injury or death. It could also damage your vehicle. . Explosive hydrogen gas is always pre- sent in the vicinity of the battery. Keep all sparks [...]

SCE0772 VQ35HR engine SCE0770 VK50VE engine WARNING Always follow the instructions below. Failure to do so could result in damage to the charg ing system and cause personal injury. 1. Remove the engine compartment cover, if necessary. See “ ENGINE C OMPART - MENT CHECK LOCA TIONS ” in the “ 8. Maintenance and do-it-yourself ” sec- tion. 2. [...]

wheel will lock and cannot be turned. Supply power using jumper cables before pushing the ignition switch and disengaging the steering lock (if so equipped). CAUTION . Always connect positive (+) to positive (+) and negative ( − ) to body ground (as illustrated) — not to the battery. . Make sure the jumper cables do not touch moving parts in th[...]

CAUTION . Do not continue to drive if your vehicle overheats. Doing so could cause engine damage or a vehicle fire. . T o avoid the danger of being scalded, never r emove the radiator cap while the engine is still hot. When the radiator cap is removed, pressurized hot water will spurt out, possibly causing serious injury. . Do not open the hood if [...]

When towing your vehicle, all State (Pro- vincial in Canada) and local regulations for towing must be followed. Incorrect towing equip ment could damage your ve hicle . T owing instructions are available from an INFINITI retailer. Local service operators are familiar w ith the applicable l aws and procedures for towing. To assure proper towing and [...]

SCE0768 Two-wheel drive models TOWING REC OMMENDED BY INFINITI Two- Wheel Drive (2WD) models INFINITI recommends that your vehicle be towed with the driving (rear) wheels off the ground or place the vehicle on a flat bed truck as illustrated. CAUTION . Never tow automatic transmission mod- els with the rear wheels on the ground or four wheels on th[...]

SCE0736 All-wheel drive models All-Wheel Drive (AWD) models INFINITI recommends that towing dollies be used when towing your vehicle or the vehicle be placed on a flat bed truck as illustrated. CAUTION Never tow AWD models with any of the wheels on the ground as this may cause serious and expensive damage to the powertrain. SCE0769 6-14 In cas e of[...]

VEHICLE RECOVERY (freeing a stuck vehicle) WARNING . Stand clear of a stuck vehicle. . Do not spin your tires at high speed. This could cause them to explode and result in serious injur y. Parts of your vehicle could also overheat and be damaged. Pulling a stuck vehicle If your vehicle is stuck in sand, snow, mud, etc., us e a tow stra p o r o ther[...]

MEMO 6-16 In case of emergency[...]

7 Appearance and car e Model "S51-D" EDITED: 2011/ 1/ 7 Cleaning exterior ............................................. 7-2 Washing ..................................................... 7- 2 Waxing ....................................................... 7- 2 Removing spots ........................................... 7-3 Underbody ........[...]

In order to maintain the appearance of your vehicle, it is important to take proper care of it. T o protect the paint surface, wash your vehicle as soon as you can: . after a rainfall to prevent possible damage from acid rain . after driving on co astal roads . when contaminants such as soot, bird droppings, tree sap, metal par ticles or bugs get o[...]

finish. Machine compound or aggressive polish- ing on a base coat/clear coat paint finish may dull the finish or leave swirl marks. REMOVING SPOTS Remove tar and oil spots, industrial dust, insects, and tree sap as quickly as possible from the paint surface to avoid lasting damage or staining. Special cleaning products are available at an INFINITI [...]

CHROME P ARTS Clean chrome parts regularly with a non- abrasive chrome polish to maintain the finish. TIRE DRESSING INFINITI does not recommend the use of tire dressings. Tire manufacturers apply a coating to the tires to help reduce dis- coloration of the rubber. If a tire dressing is applied to the tires, it may react with the coating and form a [...]

similar material. . Small dirt par ticles can be abrasive and damaging to the leather surfaces and should be removed promptly. Do not use saddle soap, car waxes, polishes, oils, cleaning fluids, solvents, detergents or ammonia-based cleaners as they may damage the leather ’ s natural finish. . Only use fabric protectors approved by INFINITI. . Do[...]

SEA T BEL TS The seat belts can be cleaned by wiping them with a sponge dampened in a mild soap solution. Allow t he belts t o dry completely before using them. See “ SEA T BEL TS ” in the “ 1. Safety — Seats, seat belts and supplemental re- straint system ” section. WARNING Do not allow wet seat belts to roll up in the retractor. NEVER u[...]

nents inside the vehicle as this may damage them. Chemicals used for road surface deicing are extremely corrosive. They accelerate corrosion and deterioration of underbody components suc h as the exhaust system, fuel and brake lines, brake cables, floor pan and fenders. In winter, the underbody must be cleaned periodically. For additional protectio[...]

MEMO 7-8 Appearance and car e[...]

8 Maintenance and do-it-yourself Model "S51-D" EDITED: 2011/ 1/ 7 Maintenance requirement ................................. 8- 2 Scheduled maintenanc e ............................... 8-2 General maintenance ................................... 8-2 Where to go for ser vice ................................ 8-2 General maintenance ..........[...]

Y our new INFINITI has been designed to have minimum maintenance requirements with long service intervals to save you both time and money. However, some day-to- day and regular maintenance is essential to maintain your INFINITI ’ s fine mechanic al condition, as well as its emission and engine performance. It is the owner ’ s responsibility to [...]

When driving in areas using road salt or other corrosive materials, chec k lubrication frequently. Lights*: Clean the headlights on a regular basis. Make sure that the headlights, stop lights, tail lights, turn signal lights, and other lights are all operating properly and installed securely. Also chec k headlight aim. Road wheel nuts (lug nuts)*: [...]

move up and down smoothly and that the locks (if so equipped) hold securely in all latched positions. Steering wheel: Check for changes in the steering conditions, such as exc essive free play, hard steering or strange noises. Warning lights and chimes: Make sure that all warning lights and chimes are operating properly. Windshield defroster: Check[...]

When performing any inspection or main- tenance work on your vehicle, always take care to prevent serious accidental injur y to yourself or damage to the vehicle. The following are general precautions which should be closely observed. WARNING . Park the vehicle on a level surface, apply the parking brake securely and block the wheels to prevent the[...]

SDI2262 VQ35HR ENGINE 1. Fuse/fusible link holder 2. Battery 3. Radiator filler cap 4. Engine oil dipstic k 5. Engine oil filler cap 6. Brake fluid reservoir 7. Window washer fluid reservoir 8. Power steering fluid reservoir 9. Air cleaner 10. Drive belts 11. Coolant reser voir ENGINE C OMPARTMENT CHECK LOCA TIONS 8-6 Maintenance and do-it-y oursel[...]

SDI2263 VK50VE ENGINE T o remove the engine compartment covers, unhook the clips * A located as illustrated. T o remove the engine cover, pull the cover upward first * 1 and then toward the front of the vehicle * 2 . Maintenanc e and do-it-yourself 8-7[...]

SDI2264 1. Fuse/fusible link holder 2. Battery 3. Engine oil filler cap 4. Radiator filler cap 5. Engine oil dipstic k 6. Brake fluid reservoir 7. Window washer fluid reservoir 8. Power steering fluid reservoir 9. Air cleaner 10. Drive belt loca tion 11. Coolant reser voir 8-8 Maintenance and do-it-y ourself[...]

The engine cooling system is filled at the factory with a pre-diluted mixture of 50% Genuine NISSAN Long Life Antifreeze/Cool- ant (blue) and 50% water to provide year- round anti-freeze and coolant protection. The antifreeze solution contains rust and corrosion inhibitors. Additional engine cooling system additives are not neces- sar y. WARNING . [...]

If th e cooling system requires coolant frequently , have it checked by an INFINITI retailer. CHANGING ENGINE COOLANT Major cooling system repairs should be performed by an INFINITI retailer. The service procedures can be found in the appropriate INFINITI Service Manual. Improper servicing can result in reduced heater performance and engine overhea[...]

CHECKING ENGINE OIL LEVEL 1. Park the vehicle on a level surface and apply the parking brak e. 2. Run the engine until it reaches operat- ing temperature. 3. Turn off the engine. Wait more than 15 minutes for the oil to drain back into the oil pan. 4. Remove the dipstick and wipe it clean. Reinsert it all the way . 5. Remove the dipstick again and [...]

SDI2024 VQ35HR engine — 2WD models SDI2047 VQ35HR engine — AWD models SDI2266 VK50VE engine Engine oil and filter 1. Place a large drain pan under the drain plug. 2. Remove the oil filler cap. 3. Re mov e th e dra in pl ug * 1 with a wrench and completely drain the oil. CAUTION Be careful not to burn yourself, as the engine oil is hot. . Waste [...]

Drain plug tightening torque: 22 to 29 ft-lb (29 to 39 N·m) Do not use exc essive force. 9. Refill engine with recommended oil and install the oil filler cap securely. CAUTION The dipstick must be inserted in place to prevent oil spillage from the dipstick hole while filling the engine with oil. See “ CAPACITIES AND REC OMMENDED FUEL/LUBRICANTS [...]

Contact an INFINITI retailer if replacement is required. CAUTION . Use only Genuine NISSAN Matic S A TF . Do not mix with other fluids. . Using automatic transmission fluid other than Genuine NISSAN Matic S A TF will cause deterioration in drive- ability and automatic transmission dur- ability, and may damage the automatic transmission, which is no[...]

For further brake fluid specification infor- mation, see “ CAPACITIES AND REC OM- MENDED FUEL/LUBRICANTS ” in the “ 9. T echnica l and consumer information ” sec- tion of this manual. WARNING . Use only new fluid from a sealed container. Old, inferior or contaminated fluid may damage the brake system. The use of improper fluids can damage t[...]

Add a washer solvent to the washer for better cleaning. In the winter season, add a windshield washer antifreeze. Follow the manufacturer ’ s instructions for the mixture ratio. Refill the reservoir more frequently when driving conditio ns req uire an incre ased amount of window washer fluid. Recommended fluid is Genuine NISSAN Windshield Washer [...]

. When working on or near a battery, always wear suitable eye protection and remove all jewelry. . Batter y posts , termina ls an d related accessories contain lead and lead com- pounds. Wash hands after handling. . Keep the battery out of the reach of children. DI0137MA Check the fluid level in each cell (Remove the battery cover if it is necessar[...]

JUMP ST ARTING If jump starting is necessary, see “ JUMP STAR TING ” in the “ 6. In case of emergency ” section. If the engine does not star t by jump starting, the battery may have to be replaced. Contact an INFINITI retailer . CAUTION . Do not ground accessories directly to the b a t te r y ter m i n al. D o i ng so w il l bypass the vari[...]

SDI2152 VQ35HR engine 1. Power steering fluid pump 2. Alternator 3. Crankshaft pulley 4. Air conditioner compressor 5. Drive belt auto-tensioner WARNING Be sure the ignition switch is in the OFF or LOCK position before servicing drive belts. The engine could rotate unexpectedly. 1. Visually inspect each belt for signs of unusual wear, cuts, fraying[...]

SDI2020 REPLACING SP ARK PLUGS If replacement is required, see an INFINITI retailer for servicing. Iridium-tipped spark plugs It is not necessary to replace the iridium- tipped spark plugs as frequently as the conventional type spark plugs since they will last much longer. Follow the main- tenance schedule in “ INFINITI Service and Maintenance Gu[...]

CLEANING If your windshield is not clear after using the windshield washer or if a wiper blade chatters when running, wax or other material may be on the blade or wind- shield. Clean the outside of the windshield with a washer solution or a mild detergent. Y our windshield is clean if beads do not form when rinsing with clear water. Clean eac h bla[...]

SDI2362 Be careful not to clog the washer nozzle * A . This may cause improper windshield washer operation. If the nozzle is clogged, remove any objects with a needle or small pin * B . Be careful not to damage the nozzle. Contact an INFINITI retailer if checking or replacement is required. If the brakes do not operate properly, have the brakes che[...]

noise during light to moderate stops is normal and does not affect the function or performance of the brake system. Proper brake inspection intervals should be followed. For additional information, see the maintenance log section of your “ INFINITI Service and Maintenance Guide ” for maintenance intervals. SDI1479A ENGINE COMP ARTMENT CAUTION N[...]

SDI1754 5. If the fuse is open * A , replace it with a new fuse * B . Spare fuses are stored in the passenger compa rtment fuse box. 6. If a new fuse also opens, have the electrical system c hecked and repaired by an INFINITI retailer . Fusible links If any electrical equipment does no t operate and fuses are in good condition, chec k the fusible l[...]

SDI2704 Extended storage switc h (if so equipped) If any electrical equipment does no t operate, remove the extended storage switch and check for an open fuse. NOTE: The extended storage switch is used for long term vehicle storage. Even if the extended storage switch is broken it is not necessary to replace it. Replace only the open fuse in the sw[...]

SDI2294 Replace the battery as follows: 1. Release the lock knob at the back of the Intelligent Key and remove the mechan- ical k ey. 2 . Insert a flat-blade screwdriver * A wrapped with a cloth into the slit * B of the corner and twist it to separate the upper part from the lower part. 3. Replace the battery with a new one. Recommended battery: CR[...]

stallation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accor- dance with the instructions, may cause harmful interfer ence to radio communica- tions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interfer[...]

SDI2284 1. Headlight (high-beam, low-beam) 2. Front turn signal light 3. Map light 4. Front side marker light 5. Rear personal light 6. Fog light 7. Clearance light 8. Puddle light 9. Step light 10. High-mounted stop light 11. Cargo light (sidewall) 12. Cargo light (lift gate) 13. License plate light 14. Back -up light 15. Rear combination light (t[...]

HEADLIGHTS Replacing Fog may temporarily form inside the lens of the exterior lights in the rain or in a car wash. A temperature difference between the inside and the outside of the lens causes the fog. This is not a malfunction. If large drops of water collect inside the lens, contact an INFINITI retailer. Xenon headlight bulb (if so equipped): If[...]

Replacement procedures All other lights are either type A, B, C, D, E or F . When replacing a bulb, first remove the lens and/or cover. SDI1679 SDI2030 Map light SDI2031 Rear personal light 8-30 Maintenanc e and do-it-yourself[...]

SDI1500B Cargo light SDI1839 V anity mirror light If you have a flat tire, see “ FLA T TIRE ” in the “ 6. In case of emergency ” section. TIRE PRESSURE Tire Pressure M onitoring System (TPMS) This vehi cle is equipped with the Tire Pressure Monitoring System (TPMS). It monitors tire pressure of all tires except the spare. When the low tire [...]

WARNING . Improperl y inflated t ires can fail suddenly and cause an accident. . The Gros s Vehicle W eight rating (GVWR) is locat ed on the F .M. V .S.S./ C.M. V .S. S. certif icatio n label. Th e vehicle weight capacity is indicated on the Tire and Loading Information label. Do not load your vehicle beyond this capacity. Overloading your vehicle [...]

SDI2703 Tire and Loading Information label * 1 Seating capacity: The maximum num- ber of occupants that can be seated in the vehicle. * 2 V ehicle load limit: See “ VEHICLE L OAD- ING INFORMA TION ” in the “ 9. T echnical and consumer information ” section. * 3 Orig inal size: The size of the tires originally installed on the vehicle at the[...]

SDI1949 Checking the tire pressure 1. Remove the valve stem cap from the tire. 2. Press the pressure gauge squarely onto the valve stem. Do not press too hard or force the valve stem sideways, or air will escape. If the hissing sound of air escaping from the tire is heard while chec king the pressure, reposition the gauge to eliminate this leakage.[...]

SDI1575 Example TIRE LABELING Federal law requires tire manufacturers to place stand ardized information on the sidewall of all tires. This information identifies and describes the fundamental characteristics of the tire and also provides the tire identif icati on number (TIN) for safety standard certification. The TIN can be used to identify the t[...]

SDI1607 Example * 2 TIN (Tire Identification Number) for a new tire (example: DOT XX XX XXX XXXX) 1. DOT: Abbreviation for the “ Department of T ransportation ” . The symbol can be placed above, below or to the left or right of the Tire Identification Number. 2. Two-digit code: Manufacturer ’ s identifi- cation mark 3. Two-digit code: Tire si[...]

TYPES OF TIRES WARNING . When changing or replacing tires, be sure all four tires are of the same type (Example: Summer, All Season or Snow) and construction. An INFINITI retailer may be able to help you with informa- tion about tire type, size, speed rating and availability. . Replacement tires may have a lower speed rating than the factory equipp[...]

mended by the tire chain manufacturer to ensure a tight fit. Loose end links of the tire chain must be secured or removed to prevent the possibility of whipping action damage to the fenders or underbody. If possible, avoid fully loading your vehicle when using tire chains. In addition, drive at a reduced speed. Otherwise, your vehicle may be damage[...]

SDI1663 1. Wear indicator 2. Wear indicator location mark Tire wear and damage WARNING . Tires sho uld be periodically in- spected for wear, cracking, bulging or objects caught in the tread. If excessive wear, cracks, bulging or dee p c uts are f ou nd , the tire( s ) should be r eplaced. . The original tires have built-in tread wear indicators. Wh[...]

. When a spare tire is mounted or a wheel is replaced, the TPMS will not function and the low tire pressure warning light will flash for approximately 1 minute. The light will remain on after 1 minute. C ontact your INFINITI retailer as soon as possib le for tire replacemen t an d/or system resetting. . Replacing tires with those not originally spe[...]

differential damage. . Drive carefully while the TEMPORARY USE ONL Y spare tire is installed. Avoid sharp turns and abrupt braking while driving. . Periodically chec k spare tire inflation pressure. Always keep the pressure of the TEMPORARY USE ONL Y spare tire at 60 psi (420 kPa, 4.2 bar). Always keep the pressure of the full size spare tire (if s[...]

MEMO 8-42 Maintenanc e and do-it-yourself[...]

9 T ec hnical and consumer information Model "S51-D" EDITED: 2011/ 1/ 7 Capacities and recommended fuel/lubricants ..... 9- 2 Fuel recommendation ................................... 9-4 Engine oil and oil filter recommendation ........ 9- 6 Air conditioning system refrigerant and lubricant recommendations .......................... 9- 7 S[...]

The following are approximate capacities. The actual refill capacities may be a little different. When refilling, follow the procedure instructed in the “ 8. Maintenance and do-it-yourself ” section to determine the pro per refill cap acity. Capacity (Approximate) Recommended specifications US measure Imp measure Liter Fuel 23-3/4 gal 19-3/4 ga[...]

*1: For additional information, see “ ENGINE OIL ” in the “ 8. Maintenance and do-it-yourself ” section for changing engine oil. *2: INFINITI recommends Genuine NISSAN Ester Engine Oil available at INFINITI retailers. *3: Using automatic transmission fluid other than Genui ne NISSAN Matic S A TF will cause deterioration in driveability and [...]

FUEL REC OMMENDA TION VK50VE engine Use unleaded premium gasoline with an octane rating of at least 91 AKI (Anti-Knock Index) number (Research octane number 96). If premium gasoline is not availabl e, unleaded regular gasoline with an octane rating of 87 AKI number (Research octane number 91) may be temporarily used, but only under the following pr[...]

15%.) . If a methanol blend is used, it should contain no more than 5% methanol (methyl alcohol, wood alcohol). It should also contain a suitable amount of appropriate cosolvents and corro- sion inhibitors. If not properly formu- lated with appropriate cosolvents and corros ion in h ibit ors , such metha nol blends may cause fuel system damage and/[...]

that region. STI0505 1. API certification mark 2. API service symbol ENGINE OIL AND OIL FIL TER RE- C OMMENDA TION Selecting the correct oil It is essential to choose the correct grade, quality, and viscosity engine oil to ensure satisfactory engine life and performance, see “ CAPACITIES AND RECOMMENDED FUEL/LUBRICANTS ” earlier in this section[...]

has been previously used should not be used. Oil viscosity The engine oil viscosity or thickness changes with temperature. Because of this, it is important that the engine oil viscosity be selected based on the temperatures at which the vehicle will be operated before the next oil change. Choosing an oil viscosity ot her than that recommended could[...]

ENGINE Model VK50VE VQ35HR T ype Gasoline, 4-cycle Gasoline, 4-cycle Cylinder arrangement 8-cylinder, V-slanted at 90 8 6-cylinder, V-slanted at 60 8 Bore 6 Stroke in (mm) 3.760 6 3.453 (95.5 6 87. 7) 3.760 6 3.205 (95.5 6 81.4) Displacement cu in (cm 3 ) 306.7 (5,026) 213.45 (3,498) Firing order 1-8-7-3-6-5-4-2 1-2-3-4-5-6 Idle speed rpm See the e[...]

WHEELS AND TIRES Road wheel T ype Size Offset in (mm) Conventional 18 6 8J 1. 97 (50) 20 6 8J 21 6 9-1/2J Spare 18 6 4-1/2T 1.18 (30)/0.98 (25)* *: Aluminum Tire T ype Size Pressure PSI (kPa) [C old] Conventional P265/60R18 33 (230) P265/50R20 P265/45R21 265/45R21 Spare (T-type) T175/90D18 60 (420) T echnical and cons umer information 9-9[...]

DIMENSIONS Overall length (With front license plate) in (mm) 191. 3 (4,860) Overall width in (mm) 75. 9 (1,925) Overall height in (mm) 65.0 (1,650)*1 66.1 (1,680)*2 Front tread in (mm) 64.4 (1,635) Rear tread in (mm) 64.6 (1,640) Wheelbase in (mm) 113.6 (2,885) *1: Model without roof rac k *2: Model with roof rac k If you plan to travel in another [...]

STI0431 VEHICLE IDENTIFICA TION NUMBER (VIN) PLA TE The vehicle identification number plate is attached as shown. This number is the identification for your vehicle and is used in the vehicle registration. STI0492 VEHICLE IDENTIFICA TION NUMBER (chassis number) The number is stamped as shown in the engine compartment. STI0584 VK50VE engine STI0509 [...]

ENGINE SERIAL NUMBER The number is stamped on the engine as shown. STI0448 F .M. V .S.S./C.M. V .S.S. CERTIFICA- TION LABEL The Federal/Canadian Motor Vehicle Safety Standards (F .M. V .S.S./C.M. V .S.S.) certifica- tion label is affixed as shown. This label contains valuable vehicle information, such as: Gross V ehicle Weight Ratings (GVWR), Gross[...]

STI0373 TIRE AND LOADING INFORMA TION LABEL The cold tire pressure is shown on the Tire and Loading Information label affixed to the pillar as illustrated. STI0495 AIR C ONDITIONER SPECIFICA TION LABEL The air conditioner specification label is attached as shown. T echnic al and consumer information 9-13[...]

STI0585 Use the followi ng steps to mo unt the license plate. Before mounting the license plate, confirm that the following par ts are enclosed in the plastic bag. Only use the recommended mounting position, otherwise Intelligent Cruise C on- trol (ICC) sensor obstruction (if so equipped) may result. . License plate brac ket . J-nut 6 2 . Screw 6 2[...]

5. Insert grommets into the hole on the fascia. 6. Insert a flat-blade screwdriver into the grommet hole to add 90 8 turn onto the part * E . 7. Insert a J-nut into the license plate bracket before placing the license plate bracket on the fascia. 8. Install the license plate bracket with screws. 9. Install the license plate with bolts that are no l[...]

used to tow a trailer, the trailer tongue weight must be included as part of the cargo load. This information is located on the Tire and Loading Information label. . Cargo capacity - permissible weight of cargo, the weight of total occupants weight subtracted from the load limit. STI0445 9-16 T echnical and cons umer information[...]

VEHICLE L OAD CAPACITY Do not exceed the load limit of your vehicle shown as “ The combined weight of occu- pants and cargo ” on the Tire and Loading Information label. Do n ot exceed the number of occupants shown as “ Seating Capacity ” on the Tire and Loading Informa- tion label. T o get “ the combined weight of occupants and cargo ” [...]

SIC3849 SECURING THE L OAD There are tie down hooks located in the cargo area as shown. The tie down hooks can be used to secure cargo with ropes or other types of straps. Do not apply a total load of more than 22 lb. (98 N) to a single hook when securing cargo. WARNING . Properly secure all cargo with ropes or straps to help prevent it from slidin[...]

vehicle. When the vehicle is loaded, drive to a scale and weigh the front and the rear wheels separately to determine axle loads. Individual axle loads should not exceed either of the gross axle weight ratings (GAWR). The total of the axle loads should not exceed the gross vehicle weight rating (GVWR). These ratings are given on the vehicle certifi[...]

STI0541 The GCWR equals the combined weight of the towing vehicle (including passengers and cargo ) plu s the total trai ler loa d. T owing loads greater than these or using improper towing equipment could ad- versely affect vehicle handling, braking and performance. The ability of your vehicle to tow a trailer is not only related to the maximum tr[...]

STI0542 T ongue load When using a weight carrying or a weight distributing hitch, keep the tongue load between 10 to 15% of the total trailer load within the maximum tongue load limits shown in the f ollow ing “ T owing Load / Specification ” chart. If the tongue load become s e xcessive , r earr ange cargo to allow for proper tongue load. TI10[...]

T o determine the available towing capacity, use the following proc edure. 1. Find the GCWR for your vehicle on the “ T owing Load/Specific ation ” ch a r t found later in this section. 2. Subtract the actual vehicle weight from the GCWR. The remaining amount is the available maximum towing cap acity. T o determine the Gros s Trailer Weight, we[...]

TOWING L OAD/SPECIFICATION TOWING LOAD/SPECIFICA TION CHART Unit: lb (kg) VQ35HR VK50VE Two-Wheel Drive (2WD) model All-Wheel Drive (AWD) model All-Wheel Drive (AWD) model MAXIMUM TRAILER WEIGHT*1 — 2,000 (907) 3, 500 (1,588) MAXIMUM TONGUE LOAD — 200 (91) 350 (159) GROSS COMBINED WEIGHT RA TING — 7, 355 (3,336)*3 8,825 (4,003)*4 9,109 (4,128[...]

based on the trailer weight. . The diameter of the threaded shank of the hitch ball must be matched to the ball mount hole diameter. The hitch ball shank should be no more than 1/16 @ smaller than the hole in the ball mount. . The threaded shank of the hitch ball must be long enough to be properly secured to the ball mount. There should be at least[...]

T railer lights CAUTION When splicing into the vehicle electrical system, a commercially available power- type modu le/converter must be used to provide power for all trailer lighting. This unit uses the vehicle battery as a direct power source for all trailer lights while using the vehicle tail light, stoplight and turn signal circuits as a signal[...]

speed limits. . When backing up, hold the bottom of the ste eri ng whe el with on e hand . Move your hand in the direction in which you want the trailer to go. Make small corrections and back up slowly. If possible, have someone guide you when you are bac king up. Always block the wheels on both vehicle and trailer when parking. Parking on a slope [...]

as straight ahead as the road condi- tions allow. This combination will help stabilize the vehicle. — Do not correct trailer sway by steering or applying the brakes. 2. When the trailer sway stops, gently apply the brakes and pull to the side of the road in a safe area. 3. Try to rearrange the trailer load so it is balanced as described earlier i[...]

Automatic transmission All-Wheel Drive (AWD) models: Do not tow an AWD vehicle with any of the wheels on the ground. Two-Whe el Drive (2WD) models: T o tow a vehicle equipped with an auto- matic transmission, an appropriate vehicle dolly MUST be placed under the towed vehicle ’ s drive wheels. Always follow the dolly manufacturer ’ s recommenda[...]

WARNING T h et e m p e r a t u r eg r a d ef o r t h i st i r ei s established for a tire that is properly inflated and not overloaded. Excessive speed, under-inflation, or excessive loading, either separately or in combination, can cause heat build-up and possible tire failure. Y our INFINITI is covered by the following emission warranties. For US[...]

For USA If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTS A) in addition to notifying INFINITI. If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists i[...]

A vehicle equipped with All-Wheel Drive (AWD) should never be tested using a two wheel dynamometer (such as the dynam- ometers used by some states for emissions testing), or similar equipment. Make sure you inform test facility personnel that your vehicle is equipped with AWD before it is placed on a dynamometer. Using the wrong test equipment may [...]

personal data (e.g. name, gender , age and crash location) are recorded. However, other par ties, such as law enforcement, could combine the EDR data with the type of pe rsona lly identif ying data routi ne ly acquired during a crash investigation. T o read data recorded by an EDR, special equipment is required and access to the vehicle or the EDR [...]

will penetrate t he windshield of your vehicle in an accident. Non-genuine (imita- tion) par ts may not provide such built in safeguards. Also, non-genuine par ts often show premature wear, rust and corrosion. Why should you take a c hance? In over 40 states, the law says you must be advised if non-genuine parts are used to repair your vehicle. And[...]

MEMO 9-34 T echnic al and consumer information[...]

10 Index A ABS (Anti-lock Braking System) .................... 5 - 7 9 Adaptive front lighting system (AFS) .............. 2 - 3 9 Adjustable headrest ................................. 1 - 9 Advanced air bag system. .......................... 1 - 4 3 Aiming control, Adaptive front lighting system (AFS) ..............................................[...]

10-2 Booster seats .................................... 1 - 3 5 LA TCH system ................................... 1 - 2 3 Precautions on child restraints ................ 1 - 2 2 Child safety .......................................... 1 - 2 0 Child safety rear door lock .......................... 3 - 6 Chimes Audible reminders .....................[...]

Changing engine oil and filter ................. 8 - 1 1 Flashers (See hazard warning flasher switch) .... 2 - 4 1 Flat tire ............................................... 6 - 2 Flat towing ........................................... 9 - 2 7 Floor mat cleaning ................................... 7 - 5 Fluid Automatic transmission fluid (A TF) ....[...]

10-4 Battery replacement ............................ 8 - 2 5 Intelligent Key system warning light .......... 2 - 1 5 Key operating range ............................. 3 - 8 Key operation .................................... 3 - 9 Warning signals ................................. 3 - 1 2 Interior light c ontrol switch ........................ 2 - 6[...]

N Net, Cargo net ....................................... 2 - 5 4 New vehicle break -in ............................... 5 - 7 1 No key warning ..................................... 2 - 2 4 O Odometer ............................................. 2 - 6 Off-road recovery ..................................... 5 - 6 Oil Capacities and recommended fuel/ [...]

10-6 Satellite radio operation ............................ 4 - 6 5 Seat adjustment Front power seat adjustment ................... 1 - 2 Front seats ....................................... 1 - 2 Seat belt(s) Child safety ...................................... 1 - 2 0 Infants ........................................... 1 - 2 0 Injured persons .....[...]

Tires Flat tire ........................................... 6 - 2 Low tire pressure warning system .............. 5 - 3 Spare tire ........................................ 8 - 4 0 Tire and Loading information label ..... 8 - 3 3 , 9 - 1 3 Tire chains ....................................... 8 - 3 7 Tire dressing .....................................[...]

10-8 Window(s) Cleaning .......................................... 7 - 3 Power windows ................................. 2 - 5 8 Windshield wiper and washer switc h ............. 2 - 3 3 Wiper Rain-sensing auto wiper system ............... 2 - 3 4 Windshield wiper and washer switc h ......... 2 - 3 3 Wiper blades ...................................[...]

10-9 Model "S51-D" EDITED: 2011/ 1/ 7 MEMO[...]

FUEL REC OMMENDA TION: VK50VE engine Use unleaded premium gasoline with an octane rating of at least 91 AKI (Anti-Knock Index) number (Research octane number 96). If premium gasoline is not availabl e, unleaded regular gasoline with an octane rating of 87 AKI number (Research octane number 91) may be temporarily used, but only under the following p[...]

2011 Infiniti FX Owner’s M anual Printing: February 2011 (08) / OM1E 0S51U2 / Printed in U.S.A. For y our safety , read c arefully and keep in thi s v ehicle. 2011 Infiniti FX[...]