Infiniti G Sedan (2011) manuale d’uso

2011 Infiniti G Owner’s M anual Printing: Marc h 2011 (14) / OM1E 0V36U2 / Printed in U.S.A. For y our safety , re ad car efully and keep in thi s vehic le. 2011 Infiniti G 908753 EN G37 OM Sedan.indd 1 1/19/11 2:44 PM[...]

Your INFINITI represents a new way of thinking about vehicle design. It integrates advanced engineering and superior craftsmanship with a simple, refined aesthetic sensitivity associated with traditional Japanese culture. The result is a different notion of luxury and beauty. The car itself is important, but so is the sense of harmony that the vehi[...]

MODIFICATION OF YOUR VEHICLE This vehicle should not be modified. Modification could affect its performance, safety or durability, and may even violate governmental regulations. In addition, damage or performance problems re- sulting from modification will not be covered un- der the INFINITI warranties. WHEN READING THE MANUAL This manual includes [...]

Arrows in an illustration that are similar to those above call attention to an item in the illustration. CALIFORNIA PROPOSITION 65 WARNING WARNING Engine Exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other repro- ductive harm. In addi[...]

INFINITI CUSTOMER CARE PROGRAM INFINITI CARES ... Both INFINITI and your INFINITI retailer are dedicated to serving all your automotive needs. Your satisfaction with your vehicle and your INFINITI retailer are our primary concerns. Your INFINITI retailer is always available to assist you with all your automobile sales and service needs. However, if[...]

Table of Contents Illustrated table of contents Safety — Seats, seat belts and supplemental restraint system Instruments and controls Pre-driving checks and adjustments Monitor, climate, audio, phone and voice recognition systems Starting and driving In case of emergency Appearance and care Maintenance and do-it-yourself Technical and consumer in[...]

[...]

0 Illustrated table of contents Seats, seat belts and supplemental restraint system (SRS) ..................................... 0 - 2 Exterior front ...................................... 0 - 3 Sedan ......................................... 0 - 3 Coupe ......................................... 0 - 4 Exterior rear ..................................[...]

1. Supplemental front-impact air bags (P. 1-40) 2. Front seat-mounted side-impact supple- mental air bags (P. 1-40) 3. Seat belts (P. 1-13) 4. Head restraints (P. 1-9) 5. Roof-mounted curtain side-impact supple- mental air bags (P. 1-40) 6. Child restraint anchor points (for top tether strap child restraint) (P. 1-25) 7. Occupant classification sen[...]

SEDAN 1. Hood (P. 3-17) 2. Headlight and turn signal — Operation (P. 2-32) — Bulb replacement (P. 8-18) 3. Windshield wiper and washer — Operation (P. 2-29) — Maintenance (P. 8-19) 4. Moonroof (if so equipped) (P. 2-51) 5. Power windows (P. 2-48) 6. Recovery hook (P. 6-14) 7. Fog light (P. 2-36) 8. Tires — Wheel and tires (P. 8-31, P. 9-9[...]

COUPE 1. Hood (P. 3-17) 2. Headlight and turn signal — Operation (P. 2-32) — Bulb replacement (P. 8-26) 3. Windshield wiper and washer — Operation (P. 2-29) — Maintenance (P. 8-19) 4. Moonroof (if so equipped) (P. 2-51) 5. Power windows (P. 2-48) 6. Recovery hook (P. 6-14) 7. Fog light (P. 2-36) 8. Tires — Wheel and tires (P. 8-31, P. 9-9[...]

SEDAN 1. High-mounted stop light (model with a rear spoiler) (Bulb replacement) (P. 8-26) 2. High-mounted stop light (model without a rear spoiler) (Bulb replacement) (P. 8-26) 3. Rear window defroster (P. 2-31) 4. Rear combination light (Bulb replace- ment) (P. 8-26) 5. Satellite antenna (P. 4-39) 6. Fuel-filler door — Operation (P. 3-22) — Fu[...]

COUPE 1. High-mounted stop light (model with a rear spoiler) (Bulb replacement) (P. 8-26) 2. High-mounted stop light (model without a rear spoiler) (Bulb replacement) (P. 8-26) 3. Rear window defroster (P. 2-31) 4. Satellite antenna (P. 4-39) 5. Rear view camera (if so equipped) (P. 4-21) 6. Trunk — Intelligent Key system (P. 3-6) — Remote keyl[...]

For INFINITI Coupe/INFINITI Performance Line, Aerodynamic Package models, the vehicle parts listed below require special care or caution for treating. Refer to additional information in each section. 1. Recovery hook (P. 6-14) 2. Exhaust pipes (for INFINITI Performance Line model) (P. 3-21) SSI0807 EXTERIOR (Coupe/INFINITI Performance Line, Aerodyn[...]

SEDAN 1. Coat hooks (P. 2-47) 2. Rear personal light (P. 2-53) 3. Power windows (P. 2-48) 4. Outside mirror remote control switch (P. 3-27) 5. Automatic drive positioner switch (if so equipped) (P. 3-29) 6. Sun visors (P. 3-25) 7. Moonroof switch (if so equipped) (P. 2-51) 8. Map light (P. 2-53) 9. Sunglasses holder (P. 2-44) 10. Inside rearview mi[...]

COUPE 1. Coat hooks (P. 2-47) 2. Power windows (P. 2-48) 3. Outside mirror remote control switch (P. 3-27) 4. Automatic drive positioner switch (if so equipped) (P. 3-29) 5. Sun visors (P. 3-25) 6. Moonroof switch (if so equipped) (P. 2-51) 7. Map light (P. 2-53) 8. Sunglasses holder (P. 2-44) 9. Inside rearview mirror — Operation (P. 3-26) — H[...]

1. Vehicle Dynamic Control (VDC) OFF switch (P. 5-54) 2. Trunk lid release switch (P. 3-18) 3. Sonar system off switch (if so equipped) (P. 5-49) 4. Instrument brightness control switch (P. 2-35) 5. TRIP/RESET switch for twin trip odometer (P. 2-5) 6. Headlight, fog light and turn signal switch (P. 2-32) 7. Paddle shifter (if so equipped) (P. 5-15)[...]

1. Side ventilator (P. 4-27) 2. Meters and gauges (P. 2-4) 3. Center ventilator (P. 4-27) 4. Audio system (P. 4-38) 5. Clock (P. 2-39) 6. Center multi-function control panel — Navigation system* (if so equipped) — Vehicle information and setting buttons (P. 4-7) — Bluetooth 姞 Hands-Free Phone System (if so equipped) (P. 4-84, P. 4-95) — A[...]

1. Tachometer (P. 2-6) 2. Warning/Indicator lights (P. 2-10) 3. Speedometer (P. 2-5) 4. Engine coolant temperature gauge (P. 2-6) 5. Dot matrix liquid crystal display/ Odometer/twin trip odometer (P. 2-18) 6. Fuel gauge (P. 2-7) SIC4288 METERS AND GAUGES 0-12 Illustrated table of contents[...]

VQ25HR/VQ37VHR ENGINE 1. Fuse/fusible link holder (P. 8-21) 2. Battery (P. 8-14) 3. Engine oil filler cap (P. 8-9) 4. Brake fluid reservoir (P. 8-13) 5. Clutch fluid reservoir (Manual Transmis- sion models) (P. 8-13) 6. Window washer fluid reservoir (P. 8-14) 7. Power steering fluid reservoir (P. 8-12) 8. Air cleaner (P. 8-18) 9. Radiator filler ca[...]

Warning light Name Page All-Wheel Drive (AWD) warning light (AWD models)* 2-11 Anti-lock Braking System (ABS) warning light 2-11 Automatic Transmission check warning light 2-11 Brake warning light 2-11 Charge warning light 2-12 Engine oil pressure warn- ing light 2-12 Warning light Name Page Intelligent Cruise Control (ICC) system warning light (or[...]

1 Safety — Seats, seat belts and supplemental restraint system Seats ............................................. 1 - 2 Front seats ..................................... 1 - 3 Rear seats ...................................... 1 - 7 Head restraints ................................. 1 - 9 Armrest (if so equipped) ........................ 1-12 Seat[...]

WARNING ● Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious inju- ries. You could also slide under the lap belt and receive serious internal injuries. ● For the most effective protect[...]

FRONT SEATS Front power seat adjustment Operating tips : ● The power seat motor has an auto-reset overload protection circuit. If the motor stops during operation, wait 30 seconds, then reactivate the switch. ● Do not operate the power seat switch for a long period of time when the engine is off. This will discharge the battery. See “AUTOMATI[...]

Seat lifter : Push the front or rear end of the switch up or down to adjust the angle of the front portion or height of the seat. Lumbar support (if so equipped) : The lumbar support feature provides lower back support to the driver. Type A Push the front or back end of the switch to adjust the seatback lumbar area. Type B Move the lever 䊊 1 up o[...]

Side support (if so equipped) : The side support feature provides thigh and torso supports. Push the switch inside 䊊 1 or outside 䊊 2 to adjust the thigh area. Push the switch inside 䊊 3 or outside 䊊 4 to adjust the torso area. Thigh extension (if so equipped) : The front portion of the front seats can be extended forward for seating comfor[...]

Walk-in mechanism (Coupe) : This feature makes it easier to get in and out of the rear seat. Use the following procedure when getting in and out of the rear seat. If the sun visor is used, close it to the original position before operating the walk-in feature. 1. Pull the seatback lever upward 䊊 1 to fold the front seatback down. Make sure that t[...]

driver’s seat) or the parking brake is not applied (Manual Transmission model’s driv- er’s seat). ● When the door is closed (automatic forward- ing only). ● While the automatic drive positioner oper- ates. ● When the automatic drive positioner switches are pushed. ● When the seatback switch is pushed. ● When the seat position is adj[...]

3. Fold the rear seatback down 䊊 2 . To fold from the rear seat: 1. Pull the strap 䊊 1 located at the center bottom of the seatback sideways. The rear seatback will be unlatched. 2. Fold the rear seatback down 䊊 2 . To return the seatback: 1. Fold up the rear seatback. 2. Securely lock the seatback in position. SSS0219A SPA2122 SSS0805 1-8 Sa[...]

HEAD RESTRAINTS WARNING Head restraints supplement the other vehicle safety systems. They may provide additional protection against injury in certain rear end collisions. Adjust the head restraints properly, as specified in this section. Check the adjust- ment after someone else uses the seat. Do not attach anything to the head restraint stalks or [...]

Adjustment Adjust the head restraint so the center is level with the center of your ears. To raise the head restraint, pull it up. To lower, push and hold the lock knob and push the head restraint down. SSS0997 SSS0993 SSS0994 1-10 Safety — Seats, seat belts and supplemental restraint system[...]

Removal Use the following procedure to remove the adjustable head restraints. 1. Pull the head restraint up to the highest position. 2. Push and hold the lock knob. 3. Remove the head restraint from the seat. 4. Store the head restraint properly in a secure place so it is not loose in the vehicle. Reinstall and properly adjust the head restraint be[...]

Adjust the Active Head Restraints properly as described earlier in this section. ARMREST (if so equipped) Rear armrest Pull the armrest forward until it is horizontal. Trunk pass-through The rear center seatback can be folded to allow trunk access from inside of the vehicle. To access the trunk, pull down the rear center armrest and pull out the tr[...]

PRECAUTIONS ON SEAT BELT USAGE If you are wearing your seat belt properly adjusted, and you are sitting upright and well back in your seat with both feet on the floor, your chances of being injured or killed in an accident and/or the severity of injury may be greatly reduced. INFINITI strongly encourages you and all of your passengers to buckle up [...]

WARNING ● Every person who drives or rides in this ve- hicle should use a seat belt at all times. Chil- dren should be properly restrained in the rear seat and, if appropriate, in a child restraint. ● The seat belt should be properly adjusted to a snug fit. Failure to do so may reduce the effectiveness of the entire restraint system and increas[...]

CHILD SAFETY Children need adults to help protect them. They need to be properly restrained. In addition to the general information in this manual, child safety information is available from many other sources, including doctors, teachers, government traffic safety offices, and community organizations. Every child is differ- ent, so be sure to lear[...]

Infants Infants up to at least 1 year old should be placed in a rear-facing child restraint. INFINITI recom- mends that infants be placed in child restraints that comply with Federal Motor Vehicle Safety Standards or Canadian Motor Vehicle Safety Stan- dards. You should choose a child restraint which fits your vehicle and always follow the manufac-[...]

If the seat belt warning light blinks even if the driver’s and front passenger’s seat belts are fastened, it may indicate the pre-crash seat belt system has a malfunction. Have your INFINITI retailer check and repair the system. THREE-POINT TYPE SEAT BELT WARNING ● Every person who drives or rides in this ve- hicle should use a seat belt at a[...]

of movement in the seat. The ELR locks the seat belt when the vehicle slows down rapidly or during impacts. The Automatic Locking Retractor (ALR) mode (child restraint mode) locks the seat belt for child restraint installation. When the ALR mode is activated the seat belt cannot be extended again until the seat belt tongue is detached from the buck[...]

Center of rear seat (Sedan) Selecting correct set of seat belts : The center seat belt buckle is identified by the CENTER mark 䊊 A . The center seat belt tongue can be fastened only into the center seat belt buckle. Shoulder belt height adjustment (for Sedan front seats) The shoulder belt anchor height should be adjusted to the position best for [...]

Shoulder belt arm (for Coupe front seats) Before fastening the seat belt, pull the shoulder belt arm forward until it clicks at the lock position. The arm can also be folded down for easier access for rear seat passengers. Pulling the arm forward will allow an easy access to the belt. SEAT BELT EXTENDERS If, because of body size or driving position[...]

PRECAUTIONS ON CHILD RESTRAINTS WARNING ● Infants and small children should always be placed in an appropriate child restraint while riding in the vehicle. Failure to use a child restraint can result in serious injury or death. ● Infants and small children should never be carried on your lap. It is not possible for even the strongest adult to r[...]

● Adjustable seatbacks should be positioned to fit the child restraint, but as upright as possible. ● After attaching the child restraint, test it be- fore you place the child in it. Push it from side to side while holding the seat near the LATCH attachment or near the seat belt path. The child restraint should not move more than 1 inch (25 mm)[...]

LOWER ANCHORS AND TETHERS FOR CHILDREN SYSTEM (LATCH) Your vehicle is equipped with special anchor points that are used with Lower Anchors and Tethers for CHildren System (LATCH) compatible child restraints. This system may also be re- ferred to as the ISOFIX or ISOFIX compatible system. With this system, you do not have to use a vehicle seat belt [...]

LATCH lower anchor point locations The LATCH lower anchors are located at the rear of the seat cushion near the seatback. A label is attached to the seatback to help you locate the LATCH anchors. WARNING ● Attach LATCH system compatible child re- straints only at the locations shown in the illustration. If a child restraint is not secured properl[...]

LATCH child restraints generally require the use of a top tether strap. (See “TOP TETHER STRAP CHILD RESTRAINT” later in this section for in- stallation instructions.) When installing a child restraint, carefully read and follow the instructions in this manual and those supplied with the child restraint. (See “CHILD RESTRAINT INSTALLATION USI[...]

2. If necessary, raise or remove the headrest to position the top tether strap over the top of the seatback. If the headrest is removed, store it in a secure place. Be sure to reinstall the headrest when the child restraint is removed. See ⬙ Adjust- able headrest ⬙ in this section for headrest adjustment, removal and installation in- formation.[...]

2. Secure the child restraint anchor attach- ments to the LATCH lower anchors. Check to make sure the LATCH attachment is properly attached to the lower anchor. 3. The back of the child restraint should be secured against the vehicle seatback. If the seating position does not have an adjustable head restraint and it is inter- fering with the proper[...]

7. Check to make sure the child restraint is properly secured prior to each use. If the child restraint is loose, repeat steps 3 through 6. Rear-facing Follow these steps to install a rear-facing child restraint using LATCH system: 1. Position the child restraint on the seat. Always follow the child restraint manufac- turer’s instructions. 2. Sec[...]

3. For child restraints that are equipped with webbing mounted attachments, remove any additional slack from the anchor at- tachments. Press downward and rearward firmly in the center of the child restraint with your hand to compress the vehicle seat cushion and seatback while tighten- ing the webbing of the anchor attach- ments. 4. After attaching[...]

CHILD RESTRAINT INSTALLATION USING THE SEAT BELTS WARNING ● Even with the INFINITI Advanced Air Bag Sys- tem, never install a rear-facing child re- straint in the front passenger seat. Supple- mental front air bags inflate with great force. A rear-facing child restraint could be struck by the supplemental front air bag in a crash and could seriou[...]

2. Position the child restraint on the seat. Always follow the child restraint manufac- turer’s instructions. The back of the child restraint should be secured against the seatback. If necessary, adjust or remove the head restraint (front passenger seat only) to ob- tain the correct child restraint fit. (See “HEAD RESTRAINTS” earlier in this [...]

5. Allow the seat belt to retract. Pull up on the shoulder belt to remove any slack in the belt. 6. Remove any additional slack from the seat belt; press downward and rearward firmly in the center of the child restraint with your knee to compress the vehicle seat cushion and seatback while pulling up on the seat belt. 7. If the child restraint is e[...]

9. Check that the retractor is in the ALR mode by trying to pull more seat belt out of the retractor. If you cannot pull any more belt webbing out of the retractor, the retractor is in the ALR mode. 10. Check to make sure the child restraint is properly secured prior to each use. If the seat belt is not locked, repeat steps 3 through 8. 11. If the [...]

2. Route the seat belt tongue through the child restraint and insert it into the buckle until you hear and feel the latch engage. Be sure to follow the child restraint manu- facturer’s instructions for belt routing. 3. Pull the shoulder belt until the belt is fully extended. At this time, the seat belt re- tractor is in the Automatic Locking Retr[...]

5. Remove any additional slack from the child restraint; press downward and rear- ward firmly in the center of the child restraint with your hand to compress the vehicle seat cushion and seatback while pulling up on the seat belt. 6. After attaching the child restraint, test it before you place the child in it. Push it from side to side while holdi[...]

PRECAUTIONS ON BOOSTER SEATS WARNING ● Infants and small children should always be placed in an appropriate child restraint while riding in the vehicle. Failure to use a child restraint or booster seat can result in serious injury or death. ● Infants and small children should never be carried on your lap. It is not possible for even the stronge[...]

CAUTION Remember that a booster seat left in a closed vehicle can become very hot. Check the seating surface and buckles before placing your child in the booster seat. Booster seats of various sizes are offered by several manufacturers. When selecting any booster seat, keep the following points in mind: ● Choose only a booster seat with a label c[...]

● If the booster seat is compatible with your vehicle, place your child in the booster seat and check the various adjustments to be sure the booster seat is compatible with your child. Always follow all recommended procedures. All U.S. states and Canadian provinces or territo- ries require that infants and small children be restrained in an appro[...]

3. The booster seat should be positioned on the vehicle seat so that it is stable. If necessary, adjust or remove the head restraint to obtain the correct booster seat fit. (See “HEAD RESTRAINTS” earlier in this section.) If the head restraint is removed, store it in a secure place. Be sure to reinstall the head restraint when the booster seat [...]

7. If the booster seat is installed in the front passenger seat, push the ignition switch to the ON position. The front passenger air bag status light may or may not illuminate depending on the size of the child and the type of booster seat used. (See “Front passenger air bag and status light” later in this section.) PRECAUTIONS ON SUPPLEMENTAL[...]

WARNING ● The supplemental front air bags ordinarily will not inflate in the event of a side impact, rear impact, rollover, or lower severity fron- tal collision. Always wear your seat belts to help reduce the risk or severity of injury in various kinds of accidents. ● The front passenger air bag will not inflate if the passenger air bag status[...]

● The driver and front passenger seat belt buckles are equipped with sensors that de- tect if the seat belts are fastened. The Ad- vanced Air Bag System monitors the severity of a collision and seat belt usage then in- flates the air bags as needed. Failure to prop- erly wear seat belts can increase the risk or severity of injury in an accident. [...]

WARNING ● Never let children ride unrestrained or ex- tend their hands or face out of the window. Do not attempt to hold them in your lap or arms. Some examples of dangerous riding positions are shown in the illustrations. ● Children may be severely injured or killed when the front air bags, side air bags or curtain air bags inflate if they are[...]

WARNING Front seat-mounted side-impact supplemental air bags and roof-mounted curtain side-impact supplemental air bags: ● The front seat-mounted side-impact air bags and roof-mounted curtain air bags ordinarily will not inflate in the event of a frontal im- pact, rear impact, rollover or lower severity side collision. Always wear your seat belts[...]

1. Crash zone sensor 2. Supplemental front air bag modules (INFINITI Advanced Air Bags) 3. Front seat-mounted side-impact supple- mental air bags 4. Occupant classification sensor (pattern sensor) 5. Occupant classification system control unit 6. Roof-mounted curtain side-impact supplemental air bags 7. Roof-mounted curtain side-impact supple- ment[...]

INFINITI ADVANCED AIR BAG SYSTEM (front seats) This vehicle is equipped with the INFINITI Ad- vanced Air Bag System for the driver and front passenger seats. This system is designed to meet certification requirements under U.S. regulations. It is also permitted in Canada. However, all of the information, cautions and warnings in this manual still a[...]

occupant classification sensor is also moni- tored. Based on information from the sensors, only one front air bag may inflate in a crash, depending on the crash severity and whether the front occupants are belted or unbelted. Additionally, the front passenger air bag may be automatically turned OFF under some condi- tions, depending on the informat[...]

Status light : The front passenger air bag status light is located on the instrument panel. After the ignition switch is placed in the ⬙ ON ⬙ position, the front passenger air bag status light on the instrument panel illuminates for about 7 sec- onds and then turns off or operates depending on the front passenger occupied status. The light oper[...]

Using the passenger air bag status light, you can monitor when the front passenger air bag is automatically turned OFF with the seat occu- pied. The light will not illuminate when the front passenger seat is unoccupied. If an adult occupant is in the seat but the passenger air bag status light is illuminated (indicating that the air bag is OFF), it[...]

● Tampering with the air bag system may re- sult in serious personal injury. Tampering includes changes to the steering wheel and the instrument panel assembly by placing material over the steering wheel pad and above the instrument panel or by installing additional trim material around the air bag system. ● Modifying or tampering with the fron[...]

may inflate if the forces in another type of collision are similar to those of a higher severity side impact. They are designed to inflate on the side where the vehicle is impacted. They may not inflate in certain side collisions on the side where the vehicle is impacted. Vehicle damage (or lack of it) is not always an indication of proper suppleme[...]

● Work around and on the side air bag and curtain air bag systems should be done by an INFINITI retailer. Installation of electrical equipment should also be done by an INFINITI retailer. The Supplemental Re- straint System (SRS) wiring harnesses* should not be modified or disconnected. Un- authorized electrical test equipment and probing devices[...]

SUPPLEMENTAL AIR BAG WARNING LABELS Warning labels about the supplemental front- impact air bag systems are placed in the vehicle as shown in the illustration. SRS air bag The warning labels 䊊 1 are located on the surface of the sun visors. SUPPLEMENTAL AIR BAG WARNING LIGHT The supplemental air bag warning light, dis- playing in the instrument p[...]

WARNING If the supplemental air bag warning light is on, it could mean that the front air bag, side air bag, curtain air bag and/or pretensioner sys- tems will not operate in an accident. To help avoid injury to yourself or others, have your vehicle checked by a retailer as soon as possible. REPAIR AND REPLACEMENT PROCEDURE The front air bags, side[...]

MEMO Safety — Seats, seat belts and supplemental restraint system 1-55[...]

2 Instruments and controls Cockpit ........................................... 2 - 2 Instrument panel .................................. 2 - 3 Meters and gauges ................................ 2 - 4 Speedometer and odometer ..................... 2 - 5 Tachometer .................................... 2 - 6 Engine coolant temperature gauge ..........[...]

Coat hooks ................................... 2-47 Stowing golf bags (Coupe) ..................... 2-47 Cargo net retainers ............................ 2-48 Trunk net for extra window washer fluid (Canada only; if so equipped) .................. 2-48 Windows ........................................ 2-48 Power windows .............................[...]

1. Vehicle Dynamic Control (VDC) OFF switch (P. 5-54) 2. Trunk lid release switch (P. 3-18) 3. Sonar system off switch (if so equipped) (P. 5-49) 4. Instrument brightness control switch (P. 2-35) 5. TRIP/RESET switch for twin trip odometer (P. 2-5) 6. Headlight, fog light and turn signal switch (P. 2-32) 7. Paddle shifter (if so equipped) (P. 5-15)[...]

1. Side ventilator (P. 4-27) 2. Meters and gauges (P. 2-4) 3. Center ventilator (P. 4-27) 4. Audio system (P. 4-38) 5. Clock (P. 2-39) 6. Center multi-function control panel — Navigation system* (if so equipped) — Vehicle information and setting buttons (P. 4-7) — Bluetooth 姞 Hands-Free Phone System (if so equipped) (P. 4-84, P. 4-95) — A[...]

1. Tachometer (P. 2-6) 2. Warning/Indicator lights (P. 2-10) 3. Speedometer (P. 2-5) 4. Engine coolant temperature gauge (P. 2-6) 5. Dot matrix liquid crystal display/ Odometer/twin trip odometer (P. 2-18) 6. Fuel gauge (P. 2-7) *: The needle indicators in the speedometer, ta- chometer, engine coolant temperature gauge and fuel gauge may move sligh[...]

SPEEDOMETER AND ODOMETER Speedometer The speedometer indicates vehicle speed in miles per hour (MPH) and kilometers per hour (km/h). Odometer/twin trip odometer The odometer 䊊 1 and twin trip odometer 䊊 2 are displayed on the dot matrix crystal display when the ignition switch is in the ON position. The odometer records the total distance the v[...]

TACHOMETER The tachometer indicates engine speed in revo- lutions per minute (RPM). Do not rev the engine into the red zone 䊊 1 . CAUTION When engine speed approaches the red zone, shift to a higher gear or reduce engine speed. Operating the engine in the red zone may cause serious engine damage. ENGINE COOLANT TEMPERATURE GAUGE The gauge indicat[...]

FUEL GAUGE The gauge indicates the approximate fuel level in the tank. The gauge may move slightly during braking, turning, acceleration, or going up or down hills. The gauge needle returns to E (Empty) after the ignition switch is pushed to the OFF position. Refill the fuel tank before the gauge registers “E” (Empty). The low fuel warning appe[...]

brate the compass by driving your vehicle on your everyday route. The compass will be cali- brated once it has tracked 3 complete circles. To turn on and off the compass manually, push the switch 䊊 A while the ignition switch is in the ON position. Zone map SIC0611B 2-8 Instruments and controls[...]

ZONE VARIATION CHANGE PROCEDURE The difference between magnetic north and geographical north is known as variance. In some areas, this difference can sometimes be great enough to cause false compass readings. Follow these instructions to set the variance for your particular location if this happens: 1. Push the switch for more than 3 seconds. The c[...]

All-Wheel Drive (AWD) warning light (AWD models)* Intelligent Key warning light Front passenger air bag status light Anti-lock Braking System (ABS) warning light Low tire pressure warning light High beam indicator light Master warning light Malfunction Indicator Light (MIL) Automatic transmission check warn- ing light Preview Function warning light[...]

WARNING LIGHTS All-Wheel Drive (AWD) warning light (AWD models) (if so equipped) The warning light comes on when the ignition switch is pushed to ON. It turns off soon after the engine is started. If the AWD system malfunctions, or the diam- eter of the front and the rear wheels are differ- ent, the warning light will either remain illumi- nated or[...]

2. If the brake fluid level is correct, have the warning system checked by an INFINITI retailer. Anti-lock Braking System (ABS) warning indica- tor : When the parking brake is released and the brake fluid level is sufficient, if both the brake warning light and the Anti-lock Braking System (ABS) warning light illuminate, it may indicate the ABS is [...]

Intelligent Key warning light After the ignition switch is pushed to the ON position, this light comes on for about 2 sec- onds and then turns off. This light warns of a malfunction with the electrical steering lock system (if so equipped) or the Intelligent Key system. If the light comes on while the engine is stopped, it may be impossible to free[...]

● If the light illuminates while driving, avoid sudden steering maneuvers or abrupt brak- ing, reduce vehicle speed, pull off the road to a safe location and stop the vehicle as soon as possible. Driving with under-inflated tires may permanently damage the tires and in- crease the likelihood of tire failure. Serious vehicle damage could occur and[...]

switch is in the ON position, the system does not activate the warning light for the front passenger. See “SEAT BELTS” in the “1. Safety — Seats, seat belts and supplemental restraint system” section for precautions on seat belt usage. Supplemental air bag warning light After pushing the ignition switch to the ON position, the supplementa[...]

Front fog light indicator light The front fog light indicator light illuminates when the front fog lights are on. (See “FOG LIGHT SWITCH” later in this section.) Front passenger air bag status light The front passenger air bag status light ( ) will be lit and the passenger front air bag will be OFF depending on how the front passenger seat is b[...]

Security indicator light The light blinks when the ignition switch is in the ACC, OFF or LOCK position. This function indicates the security system equipped on the vehicle is operational. If the security system is malfunctioning, this light will remain on while the ignition switch is in the ON position. For additional information, see “SECURITY S[...]

The dot matrix liquid crystal display 䊊 1 is located between the tachometer and the speed- ometer, and it displays the automatic transmis- sion position indicator (if so equipped), the Intelligent Cruise Control (ICC) system (if so equipped) information, the Intelligent Key op- eration information and other warnings and information. For details a[...]

SIC4547 Instruments and controls 2-19[...]

INDICATORS FOR OPERATION 1. Engine start operation indicator (Automatic Transmission models) This indicator appears when the selector lever is in the P (Park) position. This indicator means that the engine will start by pushing the ignition switch with the brake pedal depressed. 2. Steering lock release malfunction indicator (if so equipped) This i[...]

SHIFT “P” warning → (Move the selector lever to “P”) → PUSH warning → (Push the ignition switch → ignition switch position is turned to ON) → PUSH warning → (Push the ignition switch → ignition switch position is turned to OFF) 8. Intelligent Key battery discharge indicator This indicator appears when the Intelligent Key batte[...]

pears. When the cruise control main switch indicator is displayed, the cruise control system is operational. Cruise set switch indicator : The indicator is displayed while the vehicle speed is controlled by the cruise control sys- tem. If the indicator blinks while the engine is running, it may indicate that the cruise control system is not functio[...]

More maintenance reminders are also available on the center display. (See “HOW TO USE INFO BUTTON” in the “4. Monitor, climate, audio, phone and voice recognition systems” section.) SIC3282 Instruments and controls 2-23[...]

TRIP COMPUTER Switches for the trip computer are located on the right side of the combination meter panel. To operate the trip computer, push the side or front of the switches as shown above. 䊊 A switch 䊊 B switch When the ignition switch is pushed to the ON position, modes of the trip computer can be selected by pushing the switch 䊊 A . Each[...]

4. Distance to empty (dte — mls or km) The distance to empty (dte) mode provides you with an estimation of the distance that can be driven before refueling. The dte is constantly being calculated, based on the amount of fuel in the fuel tank and the actual fuel consump- tion. The display is updated every 30 seconds. The dte mode includes a low ra[...]

● TIRE Select this submenu to set or reset the distance for replacing tires. ● OTHER Select this submenu and set or reset the distance for replacing items other than the engine oil, oil filter and tires. DISPLAY : There are 3 submenus under the display menu. ● BACK Select this submenu to return to the top page of the setting mode. ● LANGUAG[...]

VEHICLE SECURITY SYSTEM The vehicle security system provides visual and audio alarm signals if someone opens the doors, hood, or trunk lid when the system is armed. It is not, however, a motion detection type system that activates when a vehicle is moved or when a vibration occurs. The system helps deter vehicle theft but cannot prevent it, nor can[...]

The alarm is activated by: ● Unlocking the door or opening the trunk lid without using the button on the Intelligent Key, the door handle request switch or the mechanical key. (Even if the door is opened by releasing the door inside lock knob, the alarm will activate.) ● Opening the hood. How to stop an activated alarm The alarm will stop by un[...]

If the light still remains on and/or the engine will not start, see an INFINITI retailer for INFINITI Ve- hicle Immobilizer System service as soon as possible. Please bring all Intelligent Keys that you have when visiting an INFINITI retailer for service. WARNING In freezing temperatures the washer solution may freeze on the windshield and obscure [...]

The windshield wiper and washer operates when the ignition switch is in the ON position. Push the lever down to operate the wiper at the following speed: 䊊 1 Intermittent — intermittent operation can be adjusted by turning the knob toward 䊊 A (Slower) or 䊊 B (Faster). When the speed sensing wiper interval function is turned on, the intermit[...]

● Be sure to turn off the rain-sensing auto wiper system when you use a car wash. ● Using genuine wiper blades is recommended for proper operation of the rain-sensing auto wiper system. (See “WINDSHIELD WIPER BLADES” in the “8. Maintenance and do-it- yourself” section for wiper blade replace- ment.) To defog/defrost the rear window glas[...]

XENON HEADLIGHTS WARNING HIGH VOLTAGE ● When xenon headlights are on, they produce a high voltage. To prevent an electric shock, never attempt to modify or disassemble. Al- ways have your xenon headlights replaced at an INFINITI retailer. ● Xenon headlights provide considerably more light than conventional headlights. If they are not correctly [...]

Autolight system (if so equipped) The autolight system allows the headlights to be set so they turn on and off automatically. To set the autolight system: 1. Make sure the headlight switch is in the AUTO position 䊊 1 . 2. Push the ignition switch to the ON posi- tion. 3. The autolight system automatically turns the headlights on and off. To turn [...]

Headlight beam select 䊊 1 To select the low beam, put the lever in the neutral position as shown. 䊊 2 To select the high beam, push the lever forward while the switch is in the position. Pull it back to select the low beam. 䊊 3 Pulling the lever toward you will flash the headlight high beam even when the head- light switch is in the OFF posit[...]

Instrument brightness control The instrument brightness control switch can be operated when the ignition switch is in the ON position. When the switch is operated, the dot matrix liquid crystal display switches to the brightness adjustment mode. Push the upper switch 䊊 A to brighten the instrument panel lights. The bar 䊊 1 moves to the + side. [...]

TURN SIGNAL SWITCH 䊊 1 Turn signal Move the lever up or down to signal the turning direction. When the turn is completed, the turn signals cancel automatically. 䊊 2 Lane change signal To indicate a lane change, move the lever up or down to the point where lights begin flashing. FOG LIGHT SWITCH To turn the fog lights on, turn the headlight swit[...]

The flasher can be actuated with the ignition switch in any position. Some state laws may prohibit the use of the hazard warning flasher switch while driving. To sound the horn, push the center pad area of the steering wheel. WARNING Do not disassemble the horn. Doing so could affect proper operation of the supplemental front air bag system. Tamper[...]

● If any abnormalities are found or the heated seat does not operate, turn the switch off and have the system checked by an INFINITI retailer. The front seats are warmed by built-in heaters. The switches located on the center console can be operated independently of each other. 1. Start the engine. 2. Turn the control knob 䊊 A to the right 䊊 [...]

For driving or starting the vehicle on snowy roads or slippery areas, turn on the SNOW mode switch. The indicator light 䊊 1 on the switch will illuminate. When the SNOW mode is activated, engine output is controlled to avoid wheel spin. The vehicle should be driven with the Vehicle Dynamic Control (VDC) system on for most driving conditions. If t[...]

The power outlet is located in the center con- sole and storage box (if so equipped). CAUTION ● The outlet and plug may be hot during or immediately after use. ● Do not use with accessories that exceed a 12 volt, 120W (10A) power draw. Do not use double adapters or more than one electrical accessory. ● Use power outlet with the engine running[...]

FRONT To open the ashtray lid, push the lid down and release it 䊊 1 . To empty the ashtray, pull out 䊊 2 . The cigarette lighter operates when the ignition switch is in the ON position. Push the lighter in all the way 䊊 3 , then release it. When the lighter is heated, it will spring out. Return the lighter to its original position after use. [...]

CUP HOLDERS CAUTION ● Avoid abrupt starting and braking when the cup holder is being used to prevent spilling the drink. If the liquid is hot, it can scald you or your passenger. ● Use only soft cups in the cup holder. Hard objects can injure you in an accident. To open the cup holder, push the lid 䊊 1 . The flap 䊊 A will be folded down whe[...]

To open the cup holder, pull the lid. Soft bottle holder CAUTION ● Do not use bottle holder for any other ob- jects that could be thrown about in the ve- hicle and possibly injure people during sud- den braking or an accident. ● Do not use bottle holder for open liquid containers. Rear SIC1846B Sedan SIC3276 Coupe SIC3462 Instruments and contro[...]

SUNGLASSES HOLDER WARNING Keep the sunglasses holder closed while driv- ing to prevent an accident. To open the sunglasses holder, push 䊊 1 . CAUTION ● Do not use for anything other than glasses. ● Do not leave glasses in the sunglasses holder while parking in direct sunlight. The heat may damage the glasses. GLOVE BOX WARNING Keep glove box [...]

Removing the console lid (model with manual transmission) To remove the console lid: 1. Remove the hinge mask 䊊 A using a screw- driver wrapped with a cloth. 2. Loosen four screws, and remove the lid. 3. Tighten the two outside screws 䊊 B . 4. Install the removed hinge mask 䊊 A to the original position. Manual transmission models SIC4307 Coup[...]

CARD HOLDER (if so equipped) The card holder is located on or behind the driver’s or passenger’s sun visor. To use the card holder, slide the card in the card holder. STORAGE BOX (if so equipped) To open, push the storage box lid 䊊 1 as illus- trated. Do not place valuable items in the storage box. Do not use the storage box as an ashtray. Ty[...]

COAT HOOKS Sedan The coat hooks are equipped beside the rear personal lights. CAUTION Do not place items which are more than 2 lb (1 kg) on the hook. Coupe To use the coat hook, push the hook 䊊 A to release. CAUTION Avoid hanging heavy goods on the hook. STOWING GOLF BAGS (Coupe) Normally, two standard golf bags can be stowed in the trunk. Insert[...]

CARGO NET RETAINERS The cargo net helps keep packages in the cargo area from moving around while your vehicle is driven. To install the cargo net, attach the hooks to the retainers 䊊 A . CAUTION Avoid keeping heavy objects in the net. TRUNK NET FOR EXTRA WINDOW WASHER FLUID (Canada only; if so equipped) The trunk net is provided for holding a tan[...]

Main power window switch (driver’s side) 1. Driver side window 2. Front passenger side window 3. Rear left passenger side window (Sedan only) 4. Rear right passenger side window (Sedan only) 5. Window lock button To open or close the window, push down 䊊 A or pull up 䊊 B the switch and hold it. The main switch (driver side switches) will open [...]

Automatic operation (for front door windows or all door windows) To fully open or close the window, completely push down or pull up the switch and release it; it need not be held. The window will automati- cally open or close all the way. To stop the window, just push or lift the switch in the opposite direction. A light push or pull on the switch [...]

Automatic adjusting function (Coupe) CAUTION When the battery cable is removed from the battery terminal, do not close either of the front doors. The automatic window adjusting func- tion will not work and the side roof panel may be damaged. The power window has an automatic adjusting function. When the door is being opened, the window is automatic[...]

Sunshade The sunshade will open automatically when the moonroof is opened. However, it must be closed manually. Tilting the moonroof To tilt up, first close the moonroof, then push the UP 䊊 1 side of the moonroof switch and release it; it need not be held. To tilt down the moonroof, push the DOWN 䊊 2 side. Sliding the moonroof To fully open or [...]

MAP LIGHTS Push the button as illustrated to turn the light on or off. PERSONAL LIGHTS (Sedan) Rear Push the button as illustrated to turn the light on or off. INTERIOR LIGHT CONTROL SWITCH The interior light control switch has three posi- tions: ON, DOOR and OFF. ON position When the switch is in the ON position 䊊 1 the map lights and rear perso[...]

DOOR position When the switch is in the DOOR position 䊊 2 , the map lights and rear personal lights will illumi- nate under the following conditions: ● ignition switch is switched to the LOCK position – remain on for about 15 seconds. ● doors are unlocked by pushing the UNLOCK button on the Intelligent Key or door handle request switch with[...]

The light on the vanity mirror will turn on when the cover on the vanity mirror is opened. When the cover is closed, the light will turn off. The lights will also turn off after 15 minutes when the lights remain illuminated to prevent the bat- tery from becoming discharged. The light illuminates when the trunk lid is opened. When the trunk lid is c[...]

WARNING ● Do not use HomeLink 姞 Universal Transceiver with any garage door opener that lacks safety stop and reverse features as required by federal safety standards. (These stan- dards became effective for opener models manufactured after April 1, 1982.) A garage door opener which cannot detect an object in the path of a closing garage door an[...]

3. Using both hands, simultaneously push and hold both the HomeLink 姞 button you want to program and the hand-held trans- mitter button. DO NOT release the buttons until step 4 has been completed. 4. Hold down both buttons until the indica- tor light on HomeLink 姞 flashes, changing from a “slow blink” to a “rapid blink”. This could take[...]

PROGRAMMING HOMELINK 姞 FOR CANADIAN CUSTOMERS Prior to 1992, D.O.C. regulations required hand- held transmitters to stop transmitting after 2 seconds. To program your hand-held transmit- ter to HomeLink 姞 , continue to push and hold the HomeLink 姞 button (note steps 2 through 4 under “Programming HomeLink 姞 ”) while you push and re-push[...]

button that was just programmed. This proce- dure will not affect any other programmed HomeLink 姞 buttons. IF YOUR VEHICLE IS STOLEN If your vehicle is stolen, you should change the codes of any non-rolling code device that has been programmed into HomeLink 姞 . Consult the Owner’s Manual of each device or call the manufacturer or retailer of [...]

MEMO 2-60 Instruments and controls[...]

3 Pre-driving checks and adjustments Keys ............................................. 3 - 2 Intelligent Key ................................. 3 - 2 Valet hand-off .................................. 3 - 3 Doors ............................................ 3 - 4 Locking with mechanical key .................... 3 - 4 Opening and closing windows with[...]

A key number plate is supplied with your keys. Record the key number and keep it in a safe place (such as your wallet), not in the vehicle. If you lose your keys, see an INFINITI retailer for duplicates by using the key number. INFINITI does not record any key numbers so it is very important to keep track of your key number plate. A key number is o[...]

– Do not place the Intelligent Key near an electric appliance such as a television set or personal computer. – Do not allow the Intelligent Key to come into contact with water or salt water, and do not wash it in a washing machine. This could affect the system function. ● If an Intelligent Key is lost or stolen, INFINITI recommends erasing th[...]

WARNING ● Always have the doors locked while driving. Along with the use of seat belts, this pro- vides greater safety in the event of an acci- dent by helping to prevent persons from be- ing thrown from the vehicle. This also helps keep children and others from unintention- ally opening the doors, and will help keep out intruders. ● Before ope[...]

LOCKING WITH INSIDE LOCK KNOB To lock the door individually, move the inside lock knob to the lock position 䊊 1 then close the door. To unlock, move the inside lock knob to the unlock position 䊊 2 . When locking the door without an Intelligent Key, be sure not to leave the Intelligent Key inside the vehicle. LOCKING WITH POWER DOOR LOCK SWITCH [...]

3. Within 20 seconds of performing Step 2, push and hold the power door lock switch to the [graphic of open lock] position (UNLOCK) for more than 5 seconds. 4. When activated, the hazard indicator will flash twice. When deactivated, the hazard indicator will flash once. 5. The ignition switch must be placed in the OFF and ON position again between [...]

CAUTION ● Be sure to carry the Intelligent Key with you when operating the vehicle. ● Never leave the Intelligent Key in the vehicle when you leave the vehicle. The Intelligent Key is always communicating with the vehicle as it receives radio waves. The Intelligent Key system transmits weak radio waves. Environmental conditions may interfere wi[...]

● Do not place the Intelligent Key for an ex- tended period in an area where tempera- tures exceed 140°F (60°C). ● Do not attach the Intelligent Key with a key holder that contains a magnet. ● Do not place the Intelligent Key near equip- ment that produces a magnetic field, such as a TV, audio equipment and personal computers. If an Intelli[...]

DOOR LOCKS/UNLOCKS PRECAUTION ● Do not push the door handle request switch with the Intelligent Key held in your hand as illustrated. The close distance to the door handle will cause the Intelligent Key system to have difficulty recognizing that the Intel- ligent Key is outside the vehicle. ● After locking with the door handle request switch, v[...]

When you carry the Intelligent Key with you, you can lock or unlock all doors by pushing the door handle request switch (driver’s or front passen- ger’s) 䊊 A within the range of operation. When you lock or unlock the doors or the trunk lid, the hazard indicator will flash and the horn (or the outside chime) will sound as a confirma- tion. For[...]

● When the Intelligent Key is placed inside the glove box or a storage bin. ● When the Intelligent Key is placed inside the door pockets. ● When the Intelligent Key is placed inside or near metallic materials. Unlocking doors and fuel-filler door 1. Push the door handle request switch (driv- er’s or front passenger’s) 䊊 A once while car[...]

Opening trunk lid 1. Push the trunk open request switch 䊊 A for more than 1 second. 2. The trunk will unlatch. An outside chime will sound four times. 3. Raise the trunk lid to open the trunk. Lockout protection : To prevent the Intelligent Key from being acci- dentally locked in the trunk, lockout protection is equipped with the Intelligent Key [...]

TROUBLESHOOTING GUIDE Symptom Possible cause Action to take When pushing the ignition switch to stop the engine The SHIFT P warning appears on the display and the inside warning chime sounds continuously (Automatic Transmission models). The selector lever is not in the P (Park) position. Shift the selector lever to the P (Park) position. When shift[...]

WARNING The Intelligent Key transmits radio waves when the buttons are pushed. The FAA advises that the radio waves may affect aircraft navigation and communication systems. Do not operate the Intelligent Key while on an airplane. Make sure the buttons are not operated unintention- ally when the unit is stored during a flight. It is possible to loc[...]

Locking doors and fuel-filler door 1. Push the ignition switch to the OFF posi- tion and make sure you carry the Intelli- gent Key with you.*1 2. Close all the doors.*2 3. Push the LOCK button 䊊 1 on the Intelligent Key. 4. All the doors and fuel-filler door will lock. 5. The hazard indicator flashes twice and the horn chirps once. *1: Doors will[...]

● Any of the buttons on the Intelligent Key are pushed. (Note: Panic button should be pushed for more than 1 second.) Setting hazard indicator and horn mode This vehicle is set in hazard indicator and horn mode when you first receive the vehicle. In hazard indicator and horn mode, when the LOCK button 䊊 1 is pushed, the hazard indicator flashes[...]

Switching procedure : To switch the hazard indicator and horn (chime) operation, push the LOCK 䊊 1 and UN- LOCK 䊊 2 buttons on the Intelligent Key simultaneously for more than 2 seconds. ● When the hazard indicator mode is set, the hazard indicator flashes 3 times. ● When the hazard indicator and horn mode is set, the hazard indicator flash[...]

WARNING ● Do not drive with the trunk lid open. This could allow dangerous exhaust gases to be drawn into the vehicle. See “EXHAUST GAS (carbon monoxide)” in the “5. Starting and driving” section of this manual. ● Closely supervise children when they are around cars to prevent them from playing and becoming locked in the trunk where the[...]

TRUNK OPEN REQUEST SWITCH The trunk lid can be opened by pushing the trunk open request switch when the Intelligent Key is within the operating range of the trunk lock/unlock function regardless of the inside lock knob position. (See “INTELLIGENT KEY SYS- TEM” earlier in this section.) TRUNK RELEASE POWER CANCEL SWITCH When the switch located i[...]

INTERIOR TRUNK LID RELEASE WARNING Closely supervise children when they are around cars to prevent them from playing and becoming locked in the trunk where they could be seriously injured. Keep the car locked, with the trunk lid securely latched, when not in use, and prevent children’s access to Intelligent Keys. The interior trunk lid release me[...]

The INFINITI Performance Line models have unique exhaust pipes. These parts are close to the ground and may be damaged if they contact objects such as parking blocks, etc. CAUTION Reduce vehicle speed to decrease the possibil- ity of damaging these parts when: ● driving on bumpy or rutted roads ● entering or exiting parking garages and driveway[...]

OPENING THE FUEL-FILLER DOOR To open the fuel-filler door, unlock the fuel-filler door by using one of the following operations, then push the right side of the door (Sedan) or push the left side of the door (Coupe). ● Push the door handle request switch with the Intelligent Key carried with you. ● Push the UNLOCK button on the Intelligent Key.[...]

● Do not fill a portable fuel container in the vehicle or trailer. Static electricity can cause an explosion of flammable liquid, vapor or gas in any vehicle or trailer. To reduce the risk of serious injury or death when filling portable fuel containers: – Always place the container on the ground when filling. – Do not use electronic devices [...]

LOOSE FUEL CAP warning The LOOSE FUEL CAP warning appears on the dot matrix liquid crystal display when the fuel- filler cap is not tightened correctly after the vehicle has been refueled. To turn off the warning, perform the following: 1. Remove and install the fuel-filler cap as soon as possible. (See “FUEL-FILLER CAP”.). 2. Tighten the fuel-[...]

MANUAL OPERATION (if so equipped) Tilt or telescopic operation Pull the lock lever 䊊 1 down and adjust the steering wheel up, down, forward or rearward to the desired position. Push the lock lever up securely to lock the steering wheel in place. ELECTRIC OPERATION (if so equipped) Tilt or telescopic operation Move the lever to adjust the steering[...]

CAUTION ● Do not store the main sun visor before stor- ing the extension sun visor. ● Do not pull the extension sun visor forcedly downward. 1. To block out glare from the front, swing down the main sun visor 䊊 1 . 2. To block glare from the side, remove the main sun visor from the center mount and swing it to the side 䊊 2 . 3. Draw out the[...]

Automatic anti-glare type The inside mirror is designed so that it auto- matically changes reflection according to the intensity of the headlights of the following vehicle. The anti-glare system will be automatically turned on when the ignition switch is pushed to the ON position. When the anti-glare system is turned on, the indicator light 䊊 A w[...]

The outside mirror will operate only when the ignition switch is in the ACC or ON position. Turn the switch right or left to select the right or left side mirror 䊊 1 , then adjust using the con- trol switch 䊊 2 . Defrosting outside mirrors (if so equipped) The outside mirrors will be heated when the rear window defroster switch is operated. Fol[...]

VANITY MIRROR To use the front vanity mirror, pull down the sun visor and pull up the cover. The automatic drive positioner system has three features: ● Entry/exit function (Automatic Transmission Sedan models) ● Seat synchronization function ● Memory storage ENTRY/EXIT FUNCTION (Automatic Transmission Sedan models) This system is designed so[...]

AND SETTINGS” in the “4. Monitor, climate, audio, phone and voice recognition systems” section.) Initialize entry/exit function If the battery cable is disconnected, or if the fuse opens, the entry/exit function will not work though this function was set on before. In such a case, after connecting the battery or replacing with a new fuse, ope[...]

For Manual Transmission models: The parking brake must be applied with the ignition switch in the ACC position. The seat synchronization function can be acti- vated or canceled by pushing and holding the SET switch for more than 10 seconds while the ignition switch is in the ACC position. The indicator lights on the memory switches (1 and 2) will b[...]

gent Key. For additional Intelligent Key infor- mation, see “KEYS” earlier in this section. Selecting the memorized position 1. Automatic transmission models: Move the selector lever to the P (Park) position. Manual transmission models: Apply the parking brake. 2. Raise the seatback (Coupe). 3. Use one of the following methods to move the drive[...]

MEMO Pre-driving checks and adjustments 3-33[...]

4 Monitor, climate, audio, phone and voice recognition systems Safety note ....................................... 4 - 2 Center multi-function control panel ................. 4 - 2 How to use INFINITI controller ................... 4 - 4 How to use touch screen (models with navigation system) ............................. 4 - 4 Menu options (models[...]

Control buttons ............................... 4-86 Connecting procedure ......................... 4-87 Phone selection ............................... 4-87 Vehicle phonebook ............................ 4-87 Making a call ................................. 4-90 Receiving a call ............................... 4-91 During a call ...................[...]

WARNING ● Do not disassemble or modify this system. If you do, it may result in accidents, fire, or electric shock. ● Do not use this system if you notice any abnormality, such as a frozen screen or lack of sound. Continued use of the system may result in accident, fire or electric shock. ● In case you notice any foreign object in the system [...]

1. “ AUX ” button (P. 4-38) 2. “ RADIO AM·FM ” band selector button (P. 4-38) 3. INFINITI controller (P. 4-4) 4. “ OFF ” brightness control and dis- play ON/OFF button (P. 4-7) 5. “ INFO ” vehicle information button (P. 4-7) 6. “ DISC ” selector button (P. 4-38) 7. “ STATUS ” status display button (P. 4-7) 8. “ SETTING ?[...]

HOW TO USE INFINITI CONTROLLER Choose an item on the display using the main directional buttons 䊊 2 (or additional directional buttons 䊊 6 with navigation system) or center dial 䊊 3 , and push the ENTER button 䊊 1 for operation. If you push the BACK button 䊊 4 before the setup is completed, the setup will be canceled and/or the display wi[...]

Adjusting an item : Touch the + 䊊 1 or ⫺ 䊊 2 key to adjust the settings. Touch the 䊊 3 or 䊊 4 key to move to the previous or next item. Touch the 䊊 5 or 䊊 6 key to move to the previous or next page. Inputting characters : Touch the letter or number 䊊 1 . There are some options available when input- ting characters. ● Uppercase: Sh[...]

MENU OPTIONS (models with navigation system) The start menu can be displayed using the menu control switch on the steering-wheel- mounted controls. 1. While the MAP or STATUS screen is dis- played, push and hold the menu control switch until the “Menu Options” screen appears. 2. Highlight the preferred item by tilting the menu control switch up[...]

HOW TO SELECT MENUS ON THE SCREEN Vehicle functions are viewed on the display screen in menus. To select each key item, highlight the preferred item using the INFINITI controller and push the ENTER button. Whenever a menu selection is made or menu item is highlighted, different areas on the screen provide you with important information. See the fol[...]

Vehicle information display 1. Push the INFO button on the control panel. 2. Select an item from the INFO menu. 3. After viewing or adjusting the information on the following screens, push the BACK button to return to the INFO menu. See the separate Navigation System Owner’s Manual for the following items: ● Where am I? ● Traffic Info ● Wea[...]

Fuel Economy information The distance to empty, average fuel economy and current fuel economy will be displayed for reference. To reset the average fuel economy (Avg Fuel Econ), select the “Reset Fuel Eco” or “Reset” key. If the “Fuel Eco History” or “View” key is selected, the average fuel consumption history will be displayed in g[...]

Maintenance information The maintenance intervals can be displayed for the engine oil, oil filter, tire and other reminders. To set a maintenance interval, select a preferred item from the list. You can also set to display a message to remind you that the maintenance needs to be per- formed. The following example shows how to set the engine oil mai[...]

The Reminder will be automatically displayed when the specified distance has been driven and every time the ignition switch is pushed to the ACC or ON position. The reminder will not appear while driving. Select the “OK” key to hide the reminder for the rest of the current drive. To stop the reminder from appearing, perform one of the following[...]

HOW TO USE SETTING BUTTON The display as illustrated will appear when the SETTING button is pushed. For navigation settings, refer to the separate Navigation System Owner’s Manual. Audio settings The display as illustrated will appear when pushing the SETTING button and selecting the “Audio” key. Bass/Treble/Balance/Fade : To adjust the speak[...]

driver can enjoy a more crisp and clear sound that is specialized for the driver’s position. The effect of this feature depends on the type of music that is played. For some music, it may be difficult to realize the effect of this feature. DivX 姞 Registration Code (models with naviga- tion system) : The registration code for a device that is us[...]

Guidance Volume : To adjust the guidance voice volume select the “Guidance Volume” and adjust it with the INFINITI controller. You can also adjust the guidance voice volume by turning the VOLUME control knob while voice guidance is being announced. Ringtone/Incoming Call/Outgoing Call : For the details of these items, see “BLUETOOTH 姞 HANDS[...]

When any mode button is pushed with the screen off, the screen turns on for further operation. The screen will turn off automatically 5 seconds after the operation is finished. To turn on the screen, set this item to the ON position, or push and hold the “ OFF” button. ● Brightness/Contrast/Background Color To adjust the brightness and contra[...]

Clock settings (models with navigation system) The display as illustrated will appear when pushing the SETTING button and selecting the “Clock” key. On-screen Clock : When this item is turned to ON, a clock is always displayed in the upper right corner of the screen. This clock will indicate the time almost exactly because it is always adjusted[...]

Comfort settings Models with navigation system The display as illustrated will appear when pushing the SETTING button, selecting the “Oth- ers” key and then selecting the “Comfort” key. This key does not appear on the display until the ignition switch is pushed to the ON posi- tion. Models without navigation system The display as illustrate[...]

sponding door is unlocked first. All the doors can be unlocked if the door unlock operation is performed again within 60 seconds. When this item is turned to OFF, all the doors will be unlocked after the door unlock operation is performed once. Intelligent Key Lock/Unlock : When this item is turned to ON, door lock/unlock function by pushing the do[...]

Camera settings (if so equipped) The “CAMERA” screen will appear when select- ing the “Camera” key with the INFINITI control- ler and pushing the ENTER button. For the details about the camera system opera- tion, see “REARVIEW MONITOR” later in this section. Predictive Course Lines : When this item is turned to ON, the predicted course [...]

Sonar settings (if so equipped) The “Sonar” screen will appear when selecting the “Sonar” key with the INFINITI controller and pushing the ENTER button. For the details of the sonar system operation, see “SONAR SYSTEM” in the “5. Starting and driving” section. Sonar Display : When this item is turned ON, the corner/center sonar indi[...]

● (Next) Select the “ ” key to display the next file. ● (Previous) Select the “ ” key to display the previ- ous file. Setting the Image Viewer : The Image Viewer setting display will appear when selecting the “Settings” key on the full screen display. The following settings are avail- able for the full screen display. ● Slideshow [...]

● Do not put anything on the rearview camera. The rearview camera is installed above the license plate. ● When washing the vehicle with high- pressure water, be sure not to spray it around the camera. Otherwise, water may enter the camera unit causing water conden- sation on the lens, a malfunction, fire or an electric shock. ● Do not strike [...]

● If the battery is disconnected or becomes discharged, the predicted course lines may not be displayed correctly. If this occurs, drive the vehicle on a straight road for more than 5 minutes. ● The displayed lines will appear slightly off to the right because the rearview camera is not installed in the rear center of the vehicle. ● The dista[...]

4. Maneuver the steering wheel to make the vehicle width guide lines 䊊 D parallel to the parking space 䊊 C while referring to the predicted course lines. 5. When the vehicle is parked in the space completely, move the selector lever to the P (Park) position (Automatic Transmission models) or in an appropriate gear (Manual Transmission models) a[...]

Backing up on a steep downhill When backing up the vehicle down a hill, the distance guide lines and the vehicle width guide lines are shown further than the actual distance. For example, the display shows 3 ft (1 m) to the place 䊊 A , but the actual 3 ft (1 m) distance on the hill is the place 䊊 B . Note that any object on the hill is closer t[...]

Backing up behind a projecting object The position 䊊 C is shown further than the position 䊊 B in the display. However, the posi- tion 䊊 C is actually at the same distance as the position 䊊 A . The vehicle may hit the object when backing up to the position 䊊 A if the object projects over the actual backing up course. HOW TO ADJUST SCREEN T[...]

● Do not damage the camera as the monitor screen may be adversely affected. ● Do not use wax on the camera window. Wipe off any wax with a clean cloth dampened with mild detergent diluted with water. Open or close, and adjust the air flow direction of ventilators. : This symbol indicates that the vents are closed. : This symbol indicates that t[...]

WARNING ● The air conditioner cooling function oper- ates only when the engine is running. ● Do not leave children or adults who would normally require the support of others alone in your vehicle. Pets should not be left alone either. On hot, sunny days, temperatures in a closed vehicle could quickly become high enough to cause severe or possib[...]

1. “AUTO” automatic climate control ON button/Temperature control dial (driver side) 2. “A/C” air conditioner ON/OFF button 3. “ ” fan speed increase button 4. “ ” front defroster button 5. “MODE” manual air flow control button 6. “DUAL” zone control ON/OFF button/Temperature control dial (passen- ger side) 7. “OFF” butt[...]

A visible mist may be seen coming from the ventilators in hot, humid conditions as the air is cooled rapidly. This does not indicate a mal- function. Heating (A/C OFF) : The air conditioner does not activate in this mode. When you need to heat only, use this mode. 1. Push the “AUTO” button on. 2. Push the “A/C” button. (The A/C indicator wi[...]

Automatic intake air control : In the AUTO mode, the intake air will be con- trolled automatically. To manually control the intake air, push the intake air control button “ ”. To return to the automatic con- trol mode, push the intake air control button “ ” for about 2 seconds. The indi- cator lights (both air recirculation and outside air [...]

1. Push the “AUTO” button on. (The indicator on the button will illuminate and AUTO will be displayed.) 2. Use the temperature control dial to set the desired temperature. ● The temperature can be set within the fol- lowing range. – For U.S.: 60 to 90°F (16 to 32°C) – For Canada: 64 to 90°F (18 to 32°C) ● The temperature of the pass[...]

intake air, push the intake air control button “ ”. To return to the automatic con- trol mode, push the intake air control button “ ” for about 2 seconds. The indi- cator lights (both air recirculation and outside air circulation sides) will flash twice, and then the intake air will be controlled automatically. Air flow control : Pushing an[...]

AUTOMATIC CLIMATE CONTROL (Type C) Automatic operation (AUTO) The AUTO mode may be used year-round as the system automatically controls constant tem- perature, air flow distribution and fan speed after the desired temperature is set manually. To turn off the heater and air conditioner, push the “OFF” button. Cooling and dehumidified heating: 1.[...]

both the driver’s and front passenger’s sides. ● Do not set the temperature lower than the outside air temperature. Doing so may cause the temperature not to be con- trolled properly. ● If the windows fog up, use dehumidified heating instead of the A/C off heating. Dehumidified defrosting/defogging: 1. Push the “ ” button. (The indicato[...]

To return to the automatic control mode, push the intake air control button until the indicator light on the “ ” side illuminates. The advanced climate control system turns on and the intake air will be controlled automatically. To turn system off Push the OFF button. Advanced climate control system The advanced climate control system keeps the[...]

● The air flow control is not in the front defogger mode (the indicator light on the “ ” front defogger button is turned off). ● The outside temperature is about 32°F (0°C) or more. ● The outside odor and exhaust gas detection sensor detects industrial odors such as pulp or chemicals and exhaust gas such as gaso- line or diesel. When th[...]

consumer information” section for climate con- trol system refrigerant and lubricant recommen- dations.) Your INFINITI retailer will be able to service your environmentally friendly climate control sys- tem. WARNING The system contains refrigerant under high pressure. To avoid personal injury, any air con- ditioner service should be done only by [...]

FM radio reception : Range: FM range is normally limited to 25 to 30 miles (40 to 48 km), with monaural (single channel) FM having slightly more range than stereo FM. External influences may sometimes interfere with FM station reception even if the FM station is within 25 miles (40 km). The strength of the FM signal is directly related to the dista[...]

Compact Disc (CD) player ● Do not force a compact disc into the CD insert slot. This could damage the CD and/or CD player. ● Trying to load a CD with the CD door closed could damage the CD and/or CD player. ● During cold weather or rainy days, the player may malfunction due to the humidity. If this occurs, remove the CD and dehumidify or vent[...]

DVD (Digital Versatile Disc) player (models with navigation system) ● Do not force a compact disc into the CD/DVD insert slot. This could damage the CD/DVD player. ● During cold weather or rainy days, the player may malfunction due to humidity. If this occurs, remove the CD/DVD and dehumidify or ventilate the player completely. ● The player m[...]

normal. If the error persists, consult your local retailer. Unplayable File: – The file may be copy protected. – The file is not MP3, WMA, AAC, M4A or DivX 姞 type. Region Invalid: – The DVD is not for region 1 or all regions. Use DVDs with a region code “1”, “ALL” or “1 included” for your DVD entertainment system. (The region co[...]

● Do not connect a USB device if a connector or cable is wet. Allow the cable and/or connectors to dry completely before con- necting the USB device. If the connector is exposed to fluids other than water, evapora- tive residue may cause a short between the connector pins. ● Large video podcast files cause slow re- sponses in an iPod 姞 . The [...]

Playback order : ● The folder names of folders not containing compressed audio files are not shown in the display. ● If there is a file in the top level of a disc/USB, “Root Folder” is displayed. ● The playback order is the order in which the files were written by the writing software, so the files might not play in the desired order. ●[...]

Specification chart (Type A): Supported media CD, CD-R, CD-RW, DVD-ROM (models with navigation system), DVD±R, DVD±RW, DVD±R DL, USB2.0 Supported file systems CD, CD-R, CD-RW, DVD-ROM (models with navigation system), DVD±R, DVD±RW, DVD±R DL: ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported. * F[...]

Supported media CD, CD-R, CD-RW, DVD-ROM (models with navigation system), DVD±R, DVD±RW, DVD±R DL, USB2.0 Text character number limitation With navigation system: 100 characters Without navigation system: 64 characters Displayable character codes*3 01: ASCII, 02: ISO-8859-1, 03: UNICODE (UTF-16 BOM Big Endian), 04: UNICODE (UTF-16 Non-BOM Big En[...]

Specification chart (Type B): Supported media CD, CD-R, CD-RW Supported file systems CD, CD-R, CD-RW: ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported. * Files saved using the Live File System component (on a Windows Vista-based computer) are not supported. Supported versions*1 MP3 Version MPEG1, MPE[...]

Troubleshooting guide: Symptom Cause and Countermeasure Cannot play Check if the disc or USB device was inserted correctly. Check if the disc is scratched or dirty. Check if there is condensation inside the player, and if there is, wait until the condensation is gone (about 1 hour) be- fore using the player. If there is a temperature increase error[...]

Symptom Cause and Countermeasure The songs do not play back in the desired order. The playback order is the order in which the files were written by the writing software, so the files might not play in the desired order. Random/Shuffle may be active on the audio system or on a USB device. Monitor, climate, audio, phone and voice recognition systems[...]

Compressed Video Files (models with navigation system) Explanation of terms : ● DivX 姞 - DivX 姞 refers to the DivX 姞 codec owned by DivX, Inc. used for a lossy com- pression of video based on MPEG-4. ● AVI - AVI stands for Audio Video Interleave. It is a standard file format originated by Micro- soft Corporation. A “.divx” encoded fil[...]

Bluetooth 姞 Audio player (models with navigation system) ● Some Bluetooth 姞 audio devices may not be recognized by the in-vehicle audio system. ● It is necessary to set up the wireless connec- tion between a compatible Bluetooth 姞 audio device and the in-vehicle Bluetooth 姞 module before using the Bluetooth 姞 audio player. ● Operati[...]

1. ON·OFF/VOLUME control knob 2. Radio SCAN (tuning) button 3. RDM (random) RPT (repeat) play button 4. Radio CAT (category)/REW (rewind) button for SEEK/TRACK 5. Radio CAT (category)/FF (fast forward) but- ton for SEEK/TRACK 6. Radio tuning / MP3/WMA/AAC folder se- lector / AUDIO control knob 7. CD EJECT button 8. Radio station preset buttons No [...]

1. ON·OFF/VOLUME control knob 2. Radio PRESET A-B-C selector button 3. Radio SCAN (tuning)/CD RPT (repeat) play button 4. Radio CAT (category)/REW (rewind) button for SEEK/TRACK 5. Radio CAT (category)/FF (fast forward) but- ton for SEEK/TRACK 6. Radio tuning / MP3/WMA folder selector / AUDIO control knob 7. CD EJECT button 8. Radio station preset[...]

1. Radio band select button 2. DISC·AUX button 1. AUX/Satellite band select button 2. Radio band select button 3. DISC button FM-AM-SAT RADIO WITH COMPACT DISC (CD) PLAYER For all operation precautions, see “AUDIO OP- ERATION PRECAUTIONS” earlier in this section. The satellite radio mode requires an active XM Satellite Radio subscription. The [...]

This vehicle has some sound effect functions as follows: ● Speed Sensitive Vol. ● Precision Phased Audio (if so equipped) ● Driver’s Audio Stage (if so equipped) For more details, see “HOW TO USE SETTING BUTTON” earlier in this section. Switching the display (Type A) : ● Models with navigation system Pushing the DISC·AUX button will [...]

or to tune from low to high or high to low frequencies and to stop at the next broadcasting station. ● For XM Satellite Radio Push the SEEK·CAT or TRACK button or to tune to the first channel of the next or previous category. During satellite radio reception, the following notices will be displayed under certain condi- tions. ● NO SIGNAL (No s[...]

● Favorite Artists & Songs Stores the current artist or song that is being played. Touch the “Alert” key to be reminded when the stored artist or song is playing on a station while listening to XM. ● Categories Selecting a category will go to the first channel in that category as defined by XM Radio. ● Direct Tune Inputs the channel n[...]

Base) to acquire track information from the Gracenote Database, or set the priority to CD-TEXT to acquire the information from CDs. ● Automatic Recording (for CD) When this item is turned to ON, the Music Box 姞 hard drive/flash memory automatically starts recording when a CD is inserted. ● Recording Quality (for CD) The larger number (132) wi[...]

DVD (DIGITAL VERSATILE DISC) PLAYER OPERATION (models with navigation system) Precautions Start the engine when using the DVD entertain- ment system. Movies will not be shown on the front display while the vehicle is in any drive position to reduce driver distraction. Audio is available when a movie is played. To view movies in the front display, s[...]

and it will turn off automatically after a period of time. To turn it on again, push the DISC·AUX button again. DVD operation keys : When the DVD is playing without the operation screen being shown, you may use the touch screen to select items from the displayed video. You may also use the INFINITI controller to select an item from the displayed v[...]

Back: Return to the previous screen. Hide: Hide the operation key. Title Menu (DVD-VIDEO) : Some menus specific to each disc will be shown. For details, see the instructions on the disc. Title Search (DVD-VIDEO, DVD-VR) : The scene with the specified title will be dis- played each time the “+” side or “ ⫺ ” side is selected. Group Search [...]

Play Mode : Select the preferred play mode. PG/PL Mode (DVD-VR) : Select the “PG” or “PL” mode. USB INPUT OPERATION (if so equipped) Audio main operation Open the console lid and connect a USB memory 䊊 1 as illustrated. Then, push the DISC·AUX or AUX button repeatedly to switch to the USB memory mode. If the system has been turned off wh[...]

File selection (models with navigation system) When there are both audio and movie files in the USB memory, the mode select screen is displayed. Select the preferred contents to play. When there is only one type of file, the audio or movie operation screen is displayed and starts to play. If a video file restricts the number of playbacks, a pop-up [...]

Folder selection : To change to another folder in the USB memory, turn the folder selector or choose a folder displayed on the screen using the INFINITI controller. REPEAT (RPT), RANDOM (RDM) : When the RPT button is pushed while the USB memory is played, the play pattern can be change as follows. To change the play mode, push the RPT button repeat[...]

Movie file operation (models with navigation system) Park the vehicle in a safe location for the front seat occupants to operate the USB memory while watching the images. PLAY : When the DISC·AUX button is pushed with the system off and the USB memory inserted, the system will turn on. If another audio source is playing and a USB memory is inserte[...]

Settings : Select the “Settings” key to adjust the following settings. ● Audio File Playback Switch to the audio playback mode. This item is displayed only when the USB memory contains the audio files. ● Play Mode Select the “Normal” or “1 Track Repeat” play mode. ● 10 Key Search Select the “10 Key Search” key to open the numb[...]

– Operation is subject to the following two conditions: 1) This device may not cause interference and 2) This device must accept any interfer- ence, including interference that may cause undesired operation of the device IC Regulatory information : – Operation is subject to the following two conditions: 1) This device may not cause interference[...]

3. A confirmation screen will be displayed. Select “No”. Note: Selecting “Yes” will only connect the hands free phone portion of a Bluetooth 姞 device. 4. Choose a PIN code to use with the com- patible Bluetooth 姞 audio device using the number input screen. The PIN code will need to be entered into the Bluetooth 姞 audio device after st[...]

Audio main operation Push the ignition switch to the ACC or ON position. Then, push the DISC·AUX button re- peatedly to switch to the Bluetooth 姞 audio mode. If the system has been turned off while the Bluetooth 姞 audio device was playing, push- ing the ON·OFF/VOL control knob will start the Bluetooth 姞 audio device. The ability to pause, c[...]

● Shuffle Choose “Shuffle OFF”, “Shuffle All Tracks” and “Shuffle Group”. ● Repeat Choose from “Repeat OFF”, “Repeat 1 Track”, “Repeat All Tracks” and “Repeat Group”. Bluetooth 姞 settings To set up the Bluetooth 姞 device system to the preferred settings, push the SETTING button and select the “Bluetooth” key.[...]

Replace Connected Phone : Replace the Bluetooth 姞 connection with a con- nected Bluetooth 姞 cellular phone. For details about Hands-Free Phone System, see “BLUETOOTH 姞 HANDS-FREE PHONE SYSTEM (models with navigation system)” later in this section. IPOD 姞 PLAYER OPERATION (if so equipped) Connecting iPod 姞 Open the console lid and conn[...]

● First generation iPod nano 姞 (version 1.3.1 or later) ● Second generation iPod nano 姞 (version 1.1.3 or later) ● Third generation iPod nano 姞 (version 1.1 or later) ● Fourth generation iPod nano 姞 (version 1.0.2 or later) Models without navigation system : ● Fifth generation iPod 姞 (firmware version 1.3) ● First generation i[...]

When the or button is pushed for less than 1.5 seconds while the iPod 姞 is play- ing, the next track or the beginning of the current track on the iPod 姞 will be played. The INFINITI controller can also be used to select tracks when the iPod 姞 is playing. REPEAT (RPT), RANDOM (RDM) : When the RPT button is pushed while a track is being played,[...]

Recording CDs 1. Operate the audio system to play a CD. For the details of playing CDs, see “Compact Disc (CD) player operation” earlier in this section. 2. Select the “Start REC” or “REC” key. NOTE: ● The system starts playing and recording the 1st track on the CD when the “Start REC” or “REC” key is selected. ● The recordi[...]

If the CD is ejected, the audio system is turned off or the ignition switch is pushed to the OFF position, the recording also stops. Playing recorded songs Select the Music Box 姞 audio system by using one of the following methods. ● Push the audio source switch on the steering wheel repeatedly until the center display changes to the Music Box ?[...]

Next/Previous Track and Fast Forward/Rewind : When the (fast forward) or (re- wind) button is pushed for more than 1.5 sec- onds while a track is being played, the track will play while fast forwarding or rewinding. When the button is released, the track will return to the normal play speed. When the or button is pushed for less than 1.5 seconds wh[...]

There are some options available by selecting the “Menu” key on the screen during playback. Select one of the following options that are displayed on the screen if necessary. Now Playing (models with navigation system) : Displays a track list to choose a preferred track for playback. Music Library : There are some options available during play-[...]

● Edit Information by Album (models with navi- gation system) Edit the displayed name and of a selected album and the track information in the al- bum. ● Update Gracenote from USB Device (models with navigation system)/Transfer Titles from USB (models without navigation system) Update the in-vehicle Gracenote Database using a USB memory. Search[...]

Gracenote NOTE: ● The information contained in the Gracenote Database is not fully guaranteed. ● The service of the Gracenote Database on the Internet may be stopped without prior notice for maintenance. End-User License Agreement USE OF THIS PRODUCT IMPLIES ACCEPTANCE OF THE TERMS BELOW. Gracenote 姞 MusicID 姞 Terms of Use This application [...]

CONSEQUENTIAL OR INCIDENTAL DAMAGES OR FOR ANY LOST PROFITS OR LOST REVENUES. Copyright : Music recognition technology and related data are provided by Gracenote 姞 . Gracenote is the industry standard in music recognition technol- ogy and related content delivery. For more information, please visit www.gracenote.com. CD and music-related data fro[...]

AUX Menu When the “Setting” key on the display is se- lected while in the AUX mode, the menu screen will be displayed. Display Mode : Choose the display mode from the following items. ● Normal ● Wide ● Cinema CD/DVD/USB MEMORY CARE AND CLEANING CD/DVD ● Handle a CD/DVD by its edges. Never touch the surface of the disc. Do not bend the d[...]

1. Audio source switch 2. Menu control switch (models with naviga- tion system) or audio tuning switch (mod- els without navigation system) 3. Volume control switch 4. Back switch STEERING-WHEEL-MOUNTED CONTROLS FOR AUDIO Menu control switch (models with navigation system) or audio tuning switch (models without navigation system) While the display [...]

● Pushing the menu control switch (models with navigation system) will show the CD Menu. DVD (models with navigation system) : ● Tilting up/down for less than 1.5 seconds will increase or decrease the track number. ● Tilting up/down for more than 1.5 seconds will increase or decrease the title number. ● Pushing the menu control switch will [...]

When installing a car phone or a CB radio in your INFINITI, be sure to observe the following cautions, otherwise the new equipment may adversely affect the electronic control modules and electronic control system harness. WARNING ● A cellular telephone should not be used while driving so full attention may be given to vehicle operation. Some juri[...]

phone module when the ignition switch is pushed to the ON position with the registered cellular phone turned on and carried in the vehicle. You can register up to 5 different Bluetooth 姞 cellular phones in the in-vehicle phone module. However, you can talk on only one cellular phone at a time. The INFINITI Voice Recognition system supports the ph[...]

REGULATORY INFORMATION FCC Regulatory information – CAUTION: To maintain compliance with FCC’s RF exposure guidelines, use only the sup- plied antenna. Unauthorized antenna, modi- fication, or attachments could damage the transmitter and may violate FCC regulations. – Operation is subject to the following two conditions: 1. this device may no[...]

CONNECTING PROCEDURE 1. Push the PHONE button or the button, and select the “Connect Phone” key. 2. When a PIN code appears on the screen, operate the compatible Bluetooth 姞 cellu- lar phone to enter the PIN code. The connecting procedure of the cellular phone varies according to each cellular phone. See the cellular phone Owner’s Manual fo[...]

1. Push the PHONE button and select the “Vehicle Phonebook” key. 2. Select the “Add New” key at the top of the screen. 3. Choose the method for entering the phonebook entry. For this example, select “Enter Number by Keypad”. 4. Enter the digits and select the “OK” key. (See “HOW TO USE TOUCH SCREEN (mod- els with navigation system[...]

– Copy from Call History The system will show a list of incoming, outgoing or missed calls that were down- loaded from the connected cellular phone (depending on the phone’s compatibility). Select one of these entries to save in the vehicle phonebook. – Copy from the Handset The system will show the connected cellular phone’s phonebook that[...]

● Voicetag Confirm and store the voicetag. Voicetags allow easy dialing using the INFINITI Voice Recognition system. (See “INFINITI VOICE RECOGNITION SYSTEM (models with naviga- tion system)” later in this section.) To delete an entry, select the “Delete” key at step 3. MAKING A CALL To make a call, follow this procedure. 1. Push the PHON[...]

keypad displayed on the screen. (See “HOW TO USE TOUCH SCREEN (models with naviga- tion system)” earlier in this section.) RECEIVING A CALL When you hear a phone ring, the display will change to the incoming call mode. To receive a call, perform one of the following procedures listed below. a) Select the “Answer” key. b) Push the PHONE butt[...]

DURING A CALL There are some options available during a call. Select one of the following displayed on the screen if necessary. ● Hang up Finish the call. ● Use Handset Transfer the call to the cellular phone. ● Mute Mute your voice to the person. ● Keypad Using the touch tone, send digits to the connected party for using services such as v[...]

Download Handset Phonebook Download the contacts registered in a Bluetooth 姞 cellular phone. Availability of this function depends on each cellular phone. The memory downloading procedure from the cellu- lar phone also varies according to each cellular phone. See cellular phone Owner’s Manual for details. When “Auto Download” is active, the[...]

TROUBLESHOOTING GUIDE The system should respond correctly to all voice commands without difficulty. If problems are encountered, try the following solutions. Where the solutions are listed by number, try each solution in turn, starting with number 1, until the problem is resolved. Symptom Solution System fails to interpret the com- mand correctly. [...]

WARNING ● Use a phone after stopping your vehicle in a safe location. If you have to use a phone while driving, exercise extreme caution at all times so full attention may be given to ve- hicle operation. ● If you find yourself unable to devote full at- tention to vehicle operation while talking on the phone, pull off the road to a safe locatio[...]

● If the Bluetooth 姞 Hands-Free Phone System seems to be malfunctioning, please contact an INFINITI retailer. ● Some cellular phones or other devices may cause interference or a buzzing noise to come from the audio system speakers. Stor- ing the device in a different location may reduce or eliminate the noise. ● Refer to the cellular phone [...]

VOICE RECOGNITION SYSTEM You can also use the Bluetooth 姞 hands-free phone system with Voice Recognition System. INFO ● The available voice commands are only ap- plicable to the relevant language set in the LANGUAGE setting screen. (See “HOW TO USE SETTING BUTTON” earlier in this sec- tion.) ● If the vehicle is in motion, some commands ma[...]

2. A list of commands appears on the screen, and the system announces, “Please say a command after the beep. Available commands are: Call, Phone- book, Recent Calls, Connect Phone or Help”. 3. After the tone sounds and the icon on the screen changes from to , speak a command. See the “List of voice commands” later in this section for the vo[...]

Personal vocabulary (voicetags) : Voice Recognition System is equipped with the function called “voicetags”, which can be asso- ciated with the phone number and name in the phonebook. Using the voice tag will automati- cally generate a speed dial to the registered number. See “PHONEBOOK REGISTRATION” earlier in this section. You can call th[...]

List of voice commands: COMMAND ACTION “Call/Dial” “<name>” Dials the specified <name>. “Call/Dial” “Redial” Dials the last number. “Call” “<number>” Dials the specified <number>. “Phonebook” “<name>” Displays the specified <name> in the phonebook. “Phonebook” “List Names” [...]

PAIRING PROCEDURE Up to 5 cellular phones can be registered. 1. Push the button on the steering wheel. The system announces the avail- able commands. 2. Speak: “Connect Phone”. The system ac- knowledges the command and announces the next set of available commands. 3. Speak: “Add Phone”. The system ac- knowledges the command and asks you to [...]

5. The system asks the user to speak a name for the phone. Speak: “Yes”. The system acknowledges the command and registers the cellular phone. If the name is too long or too short, the system tells the user, then prompts the user for a name again. Also, if more than one phone is connected and the name sounds too much like a name already used, t[...]

RECEIVING A CALL When the ring tone is heard, press the button on the steering wheel. Once the call has ended, press the button on the steering wheel. NOTE: To reject a call when the ring tone is heard, press the button on the steering wheel. DURING A CALL During a call there are several command op- tions available. Press the button on the steering[...]

PHONE SETTINGS Call ● (a name) If there are entries stored in the Phone Book, a number associated with a name and loca- tion can be dialed. See “Phone book regis- tration” in this section to learn how to store entries. When prompted by the system, say the name of the phone book entry to call. The system acknowledges the name. If there are mul[...]

the command, the system announces all voicetags registered in the system. Playback of the list can be stopped at any time by pressing a button on the steering wheel. The system ends the VR session. ● Transfer Entry Use the Transfer Entry command to transfer the phonebook data stored in a cellular phone to the system. The system acknowledges the c[...]

● Callback Use the Callback command to dial the last incoming call. ● Help The system announces the available com- mands. Connect Phone ● Add Phone Use the Pair Phone command to connect a compatible phone to the Bluetooth 姞 Hands- Free Phone System. When asked to enter a PIN code to connect a Bluetooth 姞 cellular phone, enter the code “[...]

chooses to delete a phone or all phones, the system asks the user to confirm. NOTE: When the user deletes a phone, the associated phone book for that phone will also be deleted. ● Replace Phone Use the Replace Phone command to change the priority level of the active phone. The priority level determines which phone is active when more than one pai[...]

● The vehicle is driven during voice adaptation mode. ● The ignition switch is turned to the OFF or LOCK position. INFINITI Voice Recognition allows hands-free operation of the Phone, Navigation, Information and Audio systems in one of two modes, Stan- dard Mode or Alternate Command Mode. In Standard Mode, commands that are available are always[...]

Activating Standard Mode When the Alternate Command Mode is active, perform the following steps to switch to the Standard Mode. 1. Push the SETTING button on the instru- ment panel. 2. Select the “Others” key. 3. Select the “Voice Recognition” key. 4. Select the “Alternate Command Mode” key. 5. The indicator turns off and the Standard M[...]

Available items : ● Getting Started Describes the basics of how to operate the INFINITI Voice Recognition system. ● Let’s Practice Mode that allows practicing by following the instructions of the system voice. ● Using the Address Book Tutorial for entering a destination by using the Address Book. ● Finding a Street Address (if so equipped[...]

Useful tips for correct operation You can display useful speaking tips to help the system recognize your voice commands cor- rectly. Select “Help on Speaking” to start display. USING THE SYSTEM Initialization When the ignition switch is pushed to the ON position, INFINITI Voice Recognition is initial- ized, which may take up to one minute. When[...]

2. A list of commands appears on the screen, and the system announces, “Would you like to access Phone, Naviga- tion, Information, Audio or Help?”. 3. After the tone sounds and the icon on the screen changes from to , speak a command. Selecting the “Practice” key will start the practice mode. See “Let’s Practice” earlier in this secti[...]

When speaking a house number, speak the number “0” as “zero”. If the letter “o (Oh)” is included in the house number, it will not be recognized as the number “0 (zero)” even if you speak “oh” instead of “zero”. Please speak “zero” for the number “0 (zero)”, “oh” for the letter “o (oh)” Send digits using dial [...]

Command List Category Command: Command Action Phone Operates the Phone function Navigation Operates the Navigation function Information Displays the vehicle Information function Audio Operates the Audio function. Help Displays User Guide ● Phone Command: Command Action Dial Number Makes a call to a spoken phone number up to 10 digits. Vehicle Pho[...]

● Navigation Command: Command Action Destination Home Sets a route to your home that is stored in the Address Book. Address Searches for a location by the street address specified, and sets a route to the location. Places Sets a route to a facility near the current vehicle location. Address Book Searches for stored information in the Address Book[...]

● General Commands Command Action Go back Corrects the last recognition result to return to the previous screen Exit Cancels Voice Recognition 4-116 Monitor, climate, audio, phone and voice recognition systems[...]

Voice command examples To use the INFINITI Voice Recognition function, speaking one command is sometimes suffi- cient, but at other times it is necessary to speak two or more commands. As examples, some additional basic operations by voice commands are described here. For navigation system commands, see the sepa- rate Navigation System Owner’s Ma[...]

4. Speak “Dial Number”. 5. Speak “8 0 0”. Selecting the “Manual Controls” key switches the screen to the keypad to input the phone number manually. 6. The system announces, “Please say the next three digits or dial, or say change number.” 7. Speak “6 6 2”. SAA2536 SAA2537 SAA2538 4-118 Monitor, climate, audio, phone and voice re[...]

8. The system announces, “Please say the last four digits” or say change number. 9. Speak “ 6200 ” . 10. The system announces, “Dial or Change Number?” 11. Speak “Dial”. 12. The system makes a call to 800-662- 6200. Note : ● You can also speak “800-662-6200” (10 continuous digits) or “662-6200” (7 continu- ous digits), if [...]

Example 2 - Placing an international call to the phone number 011-81-111-222-3333: 1. Push the TALK switch located on the steering wheel. 2. The system announces, “Would you like to access Phone, Navigation, Information, Audio or Help?” 3. Speak “Phone”. 4. Speak “International Call”. SAA1588 SAA2535 SAA2536 4-120 Monitor, climate, audi[...]

5. Speak “011811112223333”. 6. Speak “Dial”. 7. System makes a call to 011-81-111-222- 3333. Note : Any digit input format is available in the Inter- national Number input process. INFINITI VOICE RECOGNITION ALTERNATE COMMAND MODE The following section is applicable when Alter- nate Command Mode is activated. When Alternate Command Mode is [...]

Activating Alternate Command Mode When the Standard Mode is active, perform the following steps to switch to the Alternate Com- mand Mode. 1. Push the SETTING button on the instru- ment panel. 2. Highlight the “Others” key. 3. Highlight the “Voice Recognition” key. 4. Highlight the “Alternate Command Mode” key. 5. The confirmation messa[...]

5. Select a category from the list. 6. Select an item. 7. If necessary, scroll the screen using the INFINITI controller to view the entire list. 8. Press the BACK button to return to the previous screen. SAA2545 SAA2546 Monitor, climate, audio, phone and voice recognition systems 4-123[...]

Commands List Phone Commands: Command Action Dial Number Makes a call to a spoken phone number. Vehicle Phonebook Makes a call to a contact that is stored in the Vehicle Phonebook. Handset Phonebook Makes a call to a contact that is stored in the mobile phone. Call History Incoming Calls Makes a call to the incoming call number. Outgoing Calls Make[...]

Information Commands: Command Action Fuel Economy Displays fuel economy information. Maintenance Displays maintenance information. Where am I? Displays your current location. Traffic Information Turns the traffic information system ON and OFF. Weather Information Displays weather information. Weather Map Displays a weather map. Audio Commands: Comm[...]

Help Commands: Command Action Command List Navigation Commands Displays the navigation command list. Phone Commands Displays the phone command list. Audio Commands Displays the audio command list. Information Commands Displays the information command list. Help Commands Displays the help command list. User Guide Displays the User Guide. Speaker Ada[...]

Displaying user guide You can confirm how to use voice commands by accessing a simplified User Guide, which con- tains basic instructions and tutorials for several voice commands. 1. Push the INFO button on the instrument panel. 2. Select the “Others” key using the INFINITI controller and push the ENTER button. 3. Highlight the “Voice Recogni[...]

Giving voice command 1. Push and release the TALK switch located on the steering wheel. 2. A list of commands appears on the screen, and the system announces, “Please say a command”. 3. After the tone sounds and the icon on the screen changes from to , speak a command. Operating tips : ● Voice commands cannot be accepted when the icon is . ?[...]

[...]

4. Select the user whose voice is memorized by the system. 5. Select the “Start Speaker Adaptation Learning” key. 6. Select a category to be learned by the system from the following list. ● Phone Commands ● Navigation Commands ● Information Commands ● Audio Commands ● Help Commands The voice commands in the category are displayed. 7. [...]

Speaker Adaptation function settings : Edit User Name Edit the user name using the keypad displayed on the screen. Delete Voice Data Resets the user’s voice that the voice recogni- tion system has learned. Continuous Learning When this item is turned to ON, you can have the system learn the voice commands in suc- cession, without selecting comman[...]

TROUBLESHOOTING GUIDE The system should respond correctly to all voice commands without difficulty. If problems are encountered, follow the solutions given in this guide for the appropriate error. Where the solutions are listed by number, try each solution in turn, starting with number one, until the problem is resolved. Symptom/error message Solut[...]

MEMO Monitor, climate, audio, phone and voice recognition systems 4-133[...]

5 Starting and driving Precautions when starting and driving .............. 5 - 2 Exhaust gas (carbon monoxide) .................. 5 - 2 Three-way catalyst ............................. 5 - 2 Tire Pressure Monitoring System (TPMS) ......... 5 - 3 Avoiding collision and rollover ................... 5 - 5 Off-road recovery ...........................[...]

Power steering ................................... 5-49 Brake system .................................... 5-49 Braking precautions ........................... 5-49 Parking brake break-in ......................... 5-50 Brake assist ..................................... 5-50 Brake assist .................................. 5-50 Preview function (Intel[...]

WARNING ● Do not leave children or adults who would normally require the support of others alone in your vehicle. Pets should not be left alone either. They could accidentally injure them- selves or others through inadvertent opera- tion of the vehicle. Also, on hot, sunny days, temperatures in a closed vehicle could quickly become high enough to[...]

CAUTION ● Do not use leaded gasoline. Deposits from leaded gasoline seriously reduce the three- way catalyst’s ability to help reduce exhaust pollutants. ● Keep your engine tuned up. Malfunctions in the ignition, fuel injection, or electrical sys- tems can cause overrich fuel flow into the three-way catalyst, causing it to overheat. Do not ke[...]

Also, this system may not detect a sudden drop in tire pressure (for example a flat tire while driving). ● The low tire pressure warning light does not automatically turn off when the tire pressure is adjusted. After the tire is inflated to the recommended pressure, the vehicle must be driven at speeds above 16 MPH (25 km/h) to activate the TPMS [...]

● Replacing tires with those not originally specified by INFINITI could affect the proper operation of the TPMS. ● Do not inject any tire liquid or aerosol tire sealant into the tires, as this may cause a malfunction of the tire pressure sensors. CAUTION ● The TPMS may not function properly when the wheels are equipped with tire chains or the[...]

cantly more likely to be injured or killed than a person properly wearing a seat belt. OFF-ROAD RECOVERY If the right side or left side wheels may unin- tentionally leave the road surface, maintain control of the vehicle by following the proce- dure below. Please note that this procedure is only a general guide. The vehicle must be driven as approp[...]

6. Turn on the hazard warning flashers and either contact a roadside emergency ser- vice to change the tire or see “CHANGING A FLAT TIRE” in the “6. In case of emer- gency” section of this Owner’s Manual. DRINKING ALCOHOL/DRUGS AND DRIVING WARNING Never drive under the influence of alcohol or drugs. Alcohol in the bloodstream reduces co- [...]

WARNING Do not operate the push-button ignition switch while driving the vehicle except in an emer- gency. (The engine will stop when the ignition switch is pushed 3 consecutive times or the ignition switch is pushed and held for more than 2 seconds.) If the engine stops while the vehicle is being driven, this could lead to a crash and serious inju[...]

● The trunk area is not included in the operat- ing range but the Intelligent Key may func- tion. ● If the Intelligent Key is placed on the instru- ment panel, rear parcel shelf, inside the glove box or door pocket, the Intelligent Key may not function. ● If the Intelligent Key is placed near the door or window outside the vehicle, the Intell[...]

again while lightly turning the steering wheel right and left. (See “DOT MATRIX LIQUID CRYS- TAL DISPLAY” in the “2. Instruments and con- trols” section.) If the battery of the vehicle is discharged, the push-button ignition switch cannot be turned from the LOCK position. Some indicators and warnings for operation are displayed on the dot m[...]

NOTE: The Intelligent Key port does not charge the In- telligent Key battery. If you see the low battery indicator in the dot matrix liquid crystal display, replace the battery as soon as possible. (See “INTELLIGENT KEY BATTERY REPLACEMENT” in the “8. Maintenance and do-it-yourself” sec- tion.) CAUTION ● Never place anything except the In[...]

ing, crank the engine. Release the accelera- tor pedal when the engine starts. ● If the engine is very hard to start because it is flooded, depress the accelerator pedal all the way to the floor and hold it. Push the ignition switch to the ON position to start cranking the engine. After 5 or 6 seconds, stop cranking by pushing the ignition switch[...]

1. Keep the foot brake pedal depressed and push the selector lever button to shift into a driving gear. 2. Release the parking brake and foot brake, then gradually start the vehicle in motion. WARNING ● Do not depress the accelerator pedal while shifting from P (Park) or N (Neutral) to R (Re- verse), D (Drive), DS (Drive Sport) or manual shift mo[...]

Push the button to shift into P (Park) or R (Reverse). All other positions can be selected without pushing the button. WARNING Apply the parking brake if the selector lever is in any position while the engine is not running. Failure to do so could cause the vehicle to move unexpectedly or roll away and result in serious personal injury or property [...]

Manual shift mode When the selector lever is in the DS (Drive Sport) position, the transmission is ready for the manual shift mode. Shift ranges can be selected manually by moving the selector lever up or down, or pulling the right-side or left-side paddle shifter. When shifting up, move the selector lever to the + (up) side or pull the right-side [...]

● In the manual shift mode, the transmission automatically shifts down to 1st gear before the vehicle comes to a stop. When accelerat- ing again, it is necessary to shift up to the desired range. Accelerator downshift — In D (Drive) position — For passing or hill climbing, fully depress the accelerator pedal to the floor. This shifts the tran[...]

CAUTION ● Do not rest your foot on the clutch pedal while driving. This may damage the clutch. ● Fully depress the clutch pedal before shift- ing to help prevent transmission damage. ● Stop your vehicle completely before shifting into R (Reverse). ● When the vehicle is stopped for a period of time, for example at a stop light, shift to N (N[...]

For quick acceleration in low altitude areas or in high altitude areas [over 4,000 ft (1,219 m)]: Gear change MPH (km/h) 1st to 2nd 15 (24) 2nd to 3rd 25 (40) 3rd to 4th 40 (64) 4th to 5th 45 (72) 5th to 6th 50 (80) Suggested maximum speed in each gear Downshift to a lower gear if the engine is not running smoothly, or if you need to accelerate. Do[...]

AUTOMATIC TRANSMISSION MODELS To apply: Fully depress the parking brake pedal 䊊 1 . To release: 1. Firmly apply the foot brake 䊊 2 . 2. Depress the parking brake pedal 䊊 1 and the parking brake will be released. 3. Before driving, be sure the brake warning light goes out. MANUAL TRANSMISSION MODELS To apply: Pull the parking brake lever up ?[...]

● on slippery roads (rain, snow, ice, etc.) ● in very windy areas Doing so could cause a loss of vehicle control and result in an accident. CAUTION On manual transmission models, do not shift into N (Neutral) without depressing the clutch pedal when the cruise control is set. Should this occur, depress the clutch pedal and turn the main switch [...]

d) Turn the MAIN switch off. Both the CRUISE indicator and SET indicator will go out. ● If you depress the brake pedal while pushing the RESUME/ACCELERATE or SET/COAST switch and reset at the cruising speed, the cruise control will disengage. Turn the MAIN switch off once and then turn it on again. ● The cruise control will automatically cancel[...]

The Intelligent Cruise Control (ICC) system au- tomatically maintains a selected distance from the vehicle traveling in front of you according to that vehicle’s speed (up to the set speed), or at the set speed when the road ahead is clear. The ICC function can be set to one of two cruise control modes: ● Vehicle-to-vehicle distance control mode[...]

1. Vehicle-to-vehicle distance control mode 2. Conventional (fixed speed) cruise control mode Push the MAIN switch 䊊 A to choose the cruise control mode between the vehicle-to-vehicle distance control mode 䊊 1 and the conventional (fixed speed) cruise control mode 䊊 2 . Always confirm the setting in the Intelligent Cruise Control system displ[...]

PRECAUTIONS ON VEHICLE-TO- VEHICLE DISTANCE CONTROL MODE The system is intended to enhance the opera- tion of the vehicle when following a vehicle traveling in the same lane and direction. If the distance sensor 䊊 A detects a slower moving vehicle ahead, the system will reduce the vehicle speed so that your vehicle follows the vehicle in front at[...]

This system will not automatically brake the ve- hicle to a stop. WARNING ● As there is a performance limit to the dis- tance control function, never rely solely on the Intelligent Cruise Control system. This system does not correct careless, inatten- tive or absent-minded driving, or overcome poor visibility in rain, fog, or other bad weather. D[...]

VEHICLE-TO-VEHICLE DISTANCE CONTROL MODE OPERATION Always pay attention to the operation of the vehicle and be ready to manually control the proper following distance. The vehicle-to- vehicle distance control mode of the Intelligent Cruise Control (ICC) system may not be able to maintain the selected distance between ve- hicles (following distance)[...]

instances, the vehicle-to-vehicle distance con- trol mode may not cancel and may not be able to maintain the selected following distance from the vehicle ahead. Be sure to check and clean the sensor regularly. The vehicle-to-vehicle distance control mode is designed to maintain a selected distance and reduce the speed to match the slower vehicle ah[...]

The detection zone of the ICC sensor is limited. A vehicle ahead must be in the detection zone for the vehicle-to-vehicle distance detection mode to maintain the selected distance from the vehicle ahead. A vehicle ahead may move outside of the de- tection zone due to its position within the same lane of travel. Motorcycles may not be detected in th[...]

When driving on some roads, such as winding, hilly, curved, narrow roads, or roads which are under construction, the ICC sensor may detect vehicles in a different lane, or may temporarily not detect a vehicle traveling ahead. This may cause the ICC system to decelerate or acceler- ate the vehicle. The detection of vehicles may also be affected by v[...]

Intelligent cruise control switch The system is operated by a MAIN switch and four control switches, all mounted on the steer- ing wheel. 1. RESUME/ACCELERATE switch: Resumes set speed or increases speed incrementally. 2. SET/COAST switch: Sets desired cruise speed, reduces speed incrementally. 3. CANCEL switch: Deactivates the system without erasi[...]

5. Set vehicle speed indicator: Indicates the set vehicle speed. For Canadian models, the speed is dis- played in km/h. 6. Intelligent Cruise Control system warn- ing light (orange): The light comes on if there is a malfunc- tion in the ICC system. When the ignition switch is pushed to the ON position, the indicators come on as illustrated to check[...]

To set cruising speed, accelerate your vehicle to the desired speed, push the SET/COAST switch and release it. (Vehicle ahead detection indica- tor, set distance indicator and set vehicle speed indicator come on.) Take your foot off the accelerator pedal. Your vehicle will maintain the set speed. When the SET/COAST switch is pushed under the follow[...]

1. System set display with vehicle ahead 2. System set display without vehicle ahead System operation WARNING Normally when controlling the distance to a vehicle ahead, this system automatically accel- erates or decelerates your vehicle according to the speed of the vehicle ahead. Depress the accelerator to properly accelerate your vehicle when acc[...]

When a vehicle is no longer detected the vehicle ahead detection indicator turns off. If a vehicle ahead appears during acceleration to the set vehicle speed or any time the ICC system is in operation, the system controls the distance to that vehicle. When passing another vehicle, the set speed indicator will flash when the vehicle speed exceeds th[...]

● Push, then quickly release the SET/COAST switch. Each time you do this, the set speed will decrease by approximately 1 MPH (1 km/h for Canada). To resume the preset speed, push and release the RESUME/ACCELERATE switch. The vehicle will resume the last set cruising speed when the vehicle speed is over 25 MPH (40 km/h). How to change the set dist[...]

Each time the DISTANCE switch 䊊 A is pushed, the set distance will change to long, middle, short and back to long again in that sequence. ● The distance to the vehicle ahead will change according to the vehicle speed. The higher the vehicle speed, the longer the distance. ● If the engine is stopped, the set distance becomes “long”. (Each [...]

The warning chime will not sound when: ● Your vehicle approaches other vehicles that are parked or moving slowly. ● The accelerator pedal is depressed, overrid- ing the system. NOTE: The approach warning chime may sound and the system display may blink when the ICC sensor detects some reflectors 䊊 A which are fitted on vehicles in other lanes[...]

Warning light and display Condition A : The chime sounds and the Intelligent Cruise Control system is canceled automatically in the conditions described below. Part of the system display will come on or blink, making it impos- sible to set. ● When the VDC is turned off ● When the ABS or VDC (including the traction control system) operates ● W[...]

Condition C : When the ICC system is not operating properly, the chime sounds and the ICC system warning light (orange) will come on. Action to take : If the warning light comes on, park the vehicle in a safe place. Turn the engine off, restart the engine, resume driving and set the ICC system again. If it is not possible to set the system or the i[...]

cause failure or malfunction. If the sensor is damaged due to an accident, contact an INFINITI retailer. ● Do not attach a sticker (including transpar- ent material) or install an accessory near the sensor. This could cause failure or malfunc- tion. CONVENTIONAL (FIXED SPEED) CRUISE CONTROL MODE This mode allows driving at a speed between 25 to 8[...]

Conventional (fixed speed) cruise control mode display and indicators The display is located between the speedom- eter and tachometer. 1. MAIN switch indicator: Indicates that the MAIN switch is ON. 2. Cruise set switch indicator: Displays while the vehicle speed is con- trolled by the conventional (fixed speed) cruise control mode of the ICC syste[...]

To set cruising speed, accelerate your vehicle to the desired speed, push the SET/COAST switch and release it. (The SET indicator will come on in the display.) Take your foot off the accelerator pedal. Your vehicle will maintain the set speed. ● To pass another vehicle, depress the accel- erator pedal. When you release the pedal, the vehicle will[...]

Warning light When the system is not operating properly, the chime sounds and the system warning light (orange) will come on. Action to take : If the warning light comes on, park the vehicle in a safe place. Turn the engine off, restart the engine, resume driving and then perform the setting again. If it is not possible to set or the indicator stay[...]

● Accelerate slowly and smoothly. Maintain cruising speeds with a constant accelerator position. ● Drive at moderate speeds on the highway. ● Avoid unnecessary stopping and braking. Keep a safe distance behind other vehicles. ● Select a gear range suitable to road condi- tions. ● Avoid unnecessary prolonged engine idling. ● Keep your en[...]

WARNING ● For AWD equipped vehicles, do not attempt to raise two wheels off the ground and shift the transmission to any drive or reverse po- sition with the engine running. Doing so may result in drivetrain damage or unexpected vehicle movement which could result in seri- ous vehicle damage or personal injury. ● Do not attempt to test an AWD e[...]

WARNING ● Do not stop or park the vehicle over flam- mable materials such as dry grass, waste paper or rags. They may ignite and cause a fire. ● Never leave the engine running while the vehicle is unattended. ● Do not leave children unattended inside the vehicle. They could unknowingly activate switches or controls. Unattended children could [...]

WARNING ● The sonar system is a convenience but it is not a substitute for proper parking. Always look around and check that it is safe to do so before parking. Always move slowly. ● Read and understand the limitations of the sonar system as contained in this section. Inclement weather may affect the function of the sonar system; this may inclu[...]

The sensitivity level of the corner/center sonar can be adjusted (higher or lower) in the SONAR setting display. (See “HOW TO USE SETTING BUTTON” in the “4. Monitor, climate, audio, phone and voice recognition systems” section for the “Sonar” settings.) 䊊 1 Rear view monitor display 䊊 A Corner sonar indicator 䊊 B Center sonar indi[...]

SONAR SYSTEM OFF SWITCH The sonar system OFF switch on the instrument panel allows the driver to turn the sonar system on and off. To turn the sonar system on and off, the ignition switch must be in the “ON” posi- tion. The indicator light 䊊 1 on the switch will illuminate when the system is turned off. If the indicator light flashes when the[...]

PARKING BRAKE BREAK-IN Break in the parking brake shoes whenever the stopping effect of the parking brake is weak- ened or whenever the parking brake shoes and/or drums/rotors are replaced, in order to assure the best braking performance. This procedure is described in the vehicle ser- vice manual and can be performed by an INFINITI retailer. Using[...]

● The pre-pressure function ceases when the following conditions are met: a) When the driver depresses the accel- erator pedal or the brake pedal. b) If the driver does not operate the ac- celerator or brake pedal within ap- proximately 1 second. ● The sensor will not detect: a) Pedestrians or objects in the roadway b) Oncoming vehicles in the [...]

● When the Preview Function operates, the brake pedal may move slightly and may make a small noise. This is not a system malfunction. Warning light and display When the Preview Function is not operating properly, a chime sounds and the system warn- ing light (orange) will come on. Action to take : If the warning light comes on, park the vehicle i[...]

ANTI-LOCK BRAKING SYSTEM (ABS) WARNING ● The Anti-lock Braking System (ABS) is a so- phisticated device, but it cannot prevent ac- cidents resulting from careless or dangerous driving techniques. It can help maintain ve- hicle control during braking on slippery sur- faces. Remember that stopping distances on slippery surfaces will be longer than [...]

Normal operation The ABS operates at speeds above 3 to 6 MPH (5 to 10 km/h). When the ABS senses that one or more wheels are close to locking up, the actuator rapidly applies and releases hydraulic pressure. This action is similar to pumping the brakes very quickly. You may feel a pulsation in the brake pedal and hear a noise from under the hood or[...]

See “Vehicle Dynamic Control (VDC) warning light” in the “2. Instruments and controls” section and “Vehicle Dynamic Control (VDC) off indicator light” in the “2. Instruments and con- trols” section. The computer has a built-in diagnostic feature that tests the system each time you start the engine and move the vehicle forward or in [...]

FREEING A FROZEN DOOR LOCK To prevent a door lock from freezing, apply deicer through the key hole. If the lock becomes frozen, heat the key before inserting it into the key hole or use the Intelligent Key system. ANTIFREEZE In the winter when it is anticipated that the outside temperature will drop below 32°F (0°C), check antifreeze to assure pr[...]

● Allow more stopping distance under these conditions. Braking should be started sooner than on dry pavement. ● Allow greater following distances on slip- pery roads. ● Watch for slippery spots (glare ice). These may appear on an otherwise clear road in shaded areas. If a patch of ice is seen ahead, brake before reaching it. Try not to brake [...]

MEMO 5-58 Starting and driving[...]

6 In case of emergency Roadside assistance program ...................... 6 - 2 Emergency engine shut off ......................... 6 - 2 Flat tire ........................................... 6 - 2 Tire Pressure Monitoring System (TPMS) ......... 6 - 2 Changing a flat tire ............................. 6 - 3 Jump starting ..........................[...]

In the event of a roadside emergency, Roadside Assistance Service is available to you. Please refer to your Warranty Information Booklet (U.S.) or Warranty & Roadside Assistance Infor- mation Booklet (Canada) for details. To shut off the engine in an emergency situation while driving, perform the following procedure: ● Rapidly push the push-b[...]

WARNING ● If the low tire pressure warning light illumi- nates while driving, avoid sudden steering maneuvers or abrupt braking, reduce vehicle speed, pull off the road to a safe location and stop the vehicle as soon as possible. Driving with under-inflated tires may permanently damage the tires and increase the likelihood of tire failure. Seriou[...]

Blocking wheels Place suitable blocks 䊊 1 at both the front and back of the wheel diagonally opposite the flat tire to prevent the vehicle from moving when it is jacked up. WARNING Be sure to block the wheel as the vehicle may move and result in personal injury. Getting the spare tire and tools Raise the trunk floor cover 䊊 1 using the tab 䊊 [...]

Jacking up the vehicle and removing the damaged tire WARNING ● Never get under the vehicle while it is sup- ported only by the jack. If it is necessary to work under the vehicle, support it with safety stands. ● Use only the jack provided with your vehicle to lift the vehicle. Do not use the jack pro- vided with your vehicle on other vehicles. [...]

2. Loosen each wheel nut one or two turns by turning counterclockwise with the wheel nut wrench. Do not remove the wheel nuts until the tire is off the ground. 3. Carefully raise the vehicle until the tire clears the ground. To lift the vehicle, securely hold the jack lever and rod with both hands as shown above. Remove the wheel nuts, and then rem[...]

2. Carefully put the spare tire on and tighten the wheel nuts finger tight. Models equipped with different sized tires in the front and rear: When replacing a front tire, make sure that the hole in the spare tire wheel is aligned with the pin on the brake rotor. 3. With the wheel nut wrench, tighten wheel nuts alternately and evenly in the se- quen[...]

5. Securely store the flat tire and jacking equipment in the vehicle. 6. Place the spare tire cover and the trunk floor carpeting over the damaged tire. 7. Close the trunk. WARNING ● Always make sure that the spare tire and jacking equipment are properly secured af- ter use. Such items can become dangerous projectiles in an accident or sudden sto[...]

WARNING Always follow the instructions below. Failure to do so could result in damage to the charging system and cause personal injury. 1. If the booster battery is in another vehicle 䊊 A , position the two vehicles ( 䊊 A and 䊊 B ) to bring their batteries into close proxim- ity to each other. Do not allow the two vehicles to touch. 2. Apply [...]

CAUTION Do not keep the starter motor engaged for more than 10 seconds. If the engine does not start right away, push the ignition switch to the OFF position and wait 10 seconds before trying again. 7. After starting your engine, carefully dis- connect the negative cable and then the positive cable ( 䊊 4 → 䊊 3 → 䊊 2 → 䊊 1 ). 8. Replac[...]

3. If engine overheating is caused by climb- ing a long hill on a hot day, run the engine at a fast idle (approximately 1,500 rpm) until the temperature gauge indication returns to normal. 4. Get out of the vehicle. Look and listen for steam or coolant escaping from the radia- tor before opening the hood. (If steam or coolant is escaping, turn off [...]

For information about towing your vehicle be- hind a recreational vehicle (RV), see “FLAT TOWING” in the “9. Technical and consumer information” section of this manual. If needed, Roadside Assistance is available. Please see your Warranty Information Booklet or Roadside Assistance I.D. Card for the toll-free number to call (U.S.) or Warrant[...]

● When towing rear wheel drive models with the front wheels on the ground or on towing dollies: Push the ignition switch to the ACC or ON position, and secure the steering wheel in a straight-ahead position with a rope or similar device. For models with a steering wheel lock mechanism, never se- cure the steering wheel by selecting the LOCK posit[...]

All-Wheel Drive (AWD) models INFINITI recommends that towing dollies be used when towing your vehicle or the vehicle be placed on a flat bed truck as illustrated. CAUTION Never tow AWD models with any of the wheels on the ground as this may cause serious and expensive damage to the powertrain. VEHICLE RECOVERY (Freeing a stuck vehicle) WARNING ● [...]

Front (except for INFINITI Performance Line, Aerodynamic Package models — Coupe): 1. To remove the hook cover from the bum- per with a suitable tool, insert the tool into the mesh and take off the removable part. 2. Securely install the vehicle recovery hook 䊊 1 stored with jacking tools as illustrated. Attach the tow strap to the recovery hook[...]

Front (INFINITI Performance Line, Aerodynamic Package models — Coupe): 1. To remove the cover 䊊 1 from the bumper with a suitable tool. 2. Pull the cover up 䊊 2 and then pull cover out. Coupe (INFINITI Performance Line, Aerodynamic Package models) SCE0964 6-16 In case of emergency[...]

3. Securely install the vehicle recovery hook 䊊 3 stored with jacking tools as illustrated. Attach the tow strap to the recovery hook. Wrap the hook 䊊 3 and strap with a cloth to avoid bumper damage as illustrated. Make sure that the hook is properly se- cured in the original place after use. Rear : Do not use the tie down hooks 䊊 1 for towin[...]

● Always pull the cable straight out from the front of the vehicle. Never pull on the vehicle at an angle. ● Pulling devices should be routed so they do not touch any part of the suspension, steer- ing, brake or cooling systems. ● Pulling devices such as ropes or canvas straps are not recommended for use in ve- hicle towing or recovery. Rocki[...]

7 Appearance and care Cleaning exterior .................................. 7 - 2 Washing ....................................... 7 - 2 Waxing ........................................ 7 - 2 Removing spots ................................ 7 - 3 Underbody ..................................... 7 - 3 Glass ......................................... 7 - 3[...]

In order to maintain the appearance of your vehicle, it is important to take proper care of it. To protect the paint surface, wash your vehicle as soon as you can: ● after a rainfall to prevent possible damage from acid rain ● after driving on coastal roads ● when contaminants such as soot, bird drop- pings, tree sap, metal particles or bugs [...]

REMOVING SPOTS Remove tar and oil spots, industrial dust, in- sects, and tree sap as quickly as possible from the paint surface to avoid lasting damage or staining. Special cleaning products are avail- able at an INFINITI retailer or any automotive accessory stores. UNDERBODY In areas where road salt is used in winter, the underbody must be cleaned[...]

TIRE DRESSING INFINITI does not recommend the use of tire dressings. Tire manufacturers apply a coating to the tires to help reduce discoloration of the rubber. If a tire dressing is applied to the tires, it may react with the coating and form a com- pound. This compound may come off the tire while driving and stain the vehicle paint. If you choose[...]

Carefully read and follow the manufacturer’s instructions before using air fresheners. FLOOR MATS WARNING To avoid potential pedal interference that may result in a collision or injury: ● NEVER place a floor mat on top of another floor mat in the driver front position. ● Use only genuine NISSAN floor mats specifi- cally designed for use in yo[...]

MOST COMMON FACTORS CONTRIBUTING TO VEHICLE CORROSION ● The accumulation of moisture-retaining dirt and debris in body panel sections, cavities, and other areas. ● Damage to paint and other protective coat- ings caused by gravel and stone chips or minor traffic accidents. ENVIRONMENTAL FACTORS INFLUENCE THE RATE OF CORROSION Moisture Accumulati[...]

MEMO Appearance and care 7-7[...]

8 Maintenance and do-it-yourself Maintenance requirement .......................... 8 - 2 Scheduled maintenance ........................ 8 - 2 General maintenance ........................... 8 - 2 Where to go for service ......................... 8 - 2 General maintenance .............................. 8 - 2 Explanation of maintenance items .......[...]

Lights ........................................... 8-26 Sedan ........................................ 8-26 Coupe ........................................ 8-27 Headlights .................................... 8-28 Exterior and interior lights ..................... 8-28 Wheels and tires ................................. 8-31 Tire pressure ...........[...]

Your new INFINITI has been designed to have minimum maintenance requirements with long service intervals to save you both time and money. However, some day-to-day and regular maintenance is essential to maintain your INFINITI’s fine mechanical condition, as well as its emission and engine performance. It is the owner’s responsibility to make su[...]

When driving in areas using road salt or other corrosive materials, check lubrication fre- quently. Lights*: Clean the headlights on a regular basis. Make sure that the headlights, stop lights, tail lights, turn signal lights, and other lights are all operating properly and installed securely. Also check headlight aim. Road wheel nuts (lug nuts)*: [...]

restraints move up and down smoothly and that the locks (if so equipped) hold securely in all latched positions. Steering wheel: Check for changes in the steer- ing conditions, such as excessive free play, hard steering or strange noises. Warning lights and chimes: Make sure that all warning lights and chimes are operating prop- erly. Windshield de[...]

When performing any inspection or mainte- nance work on your vehicle, always take care to prevent serious accidental injury to yourself or damage to the vehicle. The following are gen- eral precautions which should be closely ob- served. WARNING ● Park the vehicle on a level surface, apply the parking brake securely and block the wheels to preven[...]

This “8. Maintenance and do-it-yourself” sec- tion gives instructions regarding only those items which are relatively easy for an owner to perform. A genuine INFINITI Service Manual is also avail- able. (See “OWNER’S MANUAL/SERVICE MANUAL ORDER INFORMATION” in the “9. Tech- nical and consumer information” section.) You should be aware[...]

VQ25HR/VQ37VHR ENGINE 1. Fuse/fusible link holder 2. Battery 3. Engine oil filler cap 4. Brake fluid reservoir 5. Clutch fluid reservoir (Manual Transmis- sion models) 6. Window washer fluid reservoir 7. Power steering fluid reservoir 8. Air cleaner 9. Radiator filler cap 10. Drive belts 11. Engine coolant reservoir 12. Engine oil dipstick (for VQ3[...]

The engine cooling system is filled at the factory with a pre-diluted mixture of 50% Genuine NISSAN Long Life Antifreeze/Coolant (blue) and 50% water to provide year-round anti-freeze and coolant protection. The antifreeze solution contains rust and corrosion inhibitors. Addi- tional engine cooling system additives are not necessary. WARNING ● Ne[...]

CHECKING ENGINE COOLANT LEVEL Check the coolant level in the reservoir when the engine is cold. If the coolant level is below MIN 䊊 2 , open the reservoir tank cap and add coolant up to the MAX 䊊 1 level. If the reservoir tank is empty, check the coolant level in the radiator when the engine is cold. If there is insufficient coolant in the radi[...]

CHECKING ENGINE OIL LEVEL 1. Park the vehicle on a level surface and apply the parking brake. 2. Run the engine until it reaches operating temperature. 3. Turn off the engine. Wait more than 15 minutes for the oil to drain back into the oil pan. 4. Remove the dipstick and wipe it clean. Reinsert it all the way. 5. Remove the dipstick again and chec[...]

● Waste oil must be disposed of properly. ● Check your local regulations. 4. (Perform steps 4 to 7 only when the engine oil filter change is needed.) Loosen the oil filter 䊊 2 with an oil filter wrench. Remove the oil filter by turning it by hand. 5. Wipe the engine oil filter mounting sur- face with a clean rag. CAUTION Be sure to remove any[...]

WARNING ● Prolonged and repeated contact with used engine oil may cause skin cancer. ● Try to avoid direct skin contact with used oil. If skin contact is made, wash thoroughly with soap or hand cleaner as soon as possible. ● Keep used engine oil out of reach of children. When checking or replacement is required, we recommend an INFINITI retai[...]

For further brake and clutch fluid information, see “CAPACITIES AND RECOMMENDED FUEL/LUBRICANTS” in the “9. Technical and consumer information” section of this manual. WARNING ● Use only new fluid from a sealed container. Old, inferior or contaminated fluid may dam- age the brake system. The use of improper fluids can damage the brake sys[...]

WARNING Antifreeze is poisonous and should be stored carefully in marked containers out of the reach of children. Fill the window washer fluid reservoir periodi- cally. Add window washer fluid when the low window washer fluid warning light comes on. To fill the window washer fluid reservoir, lift the cap off the reservoir tank and pour the window w[...]

To connect the negative ( ⫺ ) battery terminal, perform the procedure in the following order. Otherwise, the window and the side roof panel may contact and be damaged. 1. Unlock and open the driver side door. Do not close the door. 2. Open the hood. 3. Connect the negative ( ⫺ ) battery terminal. Then close the hood. 4. Fully open the driver si[...]

1. Remove the cell plugs 䊊 A . 2. Add distilled water up to the UPPER LEVEL 䊊 1 line. If the side of the battery is not clear, check the distilled water level by looking directly above the cell; the condition 䊊 1 indicates OK and the conditions 䊊 2 needs more to be added. 3. Tighten cell plugs 䊊 A . Vehicles operated in high temperatures [...]

1. Power steering fluid pump 2. Alternator 3. Crankshaft pulley 4. Air conditioner compressor 쑽 : Tension checking points 1. Power steering fluid pump 2. Alternator 3. Crankshaft pulley 4. Air conditioner compressor 5. Drive belt auto-tensioner WARNING Be sure the ignition switch is in the OFF or LOCK position before servicing drive belts. The en[...]

WARNING Be sure the engine and the ignition switch are off and that the parking brake is engaged securely. CAUTION Be sure to use the correct socket to remove the spark plugs. An incorrect socket can damage the spark plugs. REPLACING SPARK PLUGS If replacement is required, see an INFINITI re- tailer for servicing. Iridium-tipped spark plugs It is n[...]

When replacing the filter, wipe the inside of the air cleaner housing and the cover with a damp cloth. WARNING ● Operating the engine with the air cleaner removed can cause you or others to be burned. The air cleaner not only cleans the air, it stops flame if the engine backfires. If it isn’t there, and the engine backfires, you could be burned[...]

REPLACING Replace the wiper blades if they are worn. 1. Pull the wiper arm. 2. Push the release tab 䊊 A , and then move the wiper blade down the wiper arm 䊊 1 while pushing the release tab to remove. 3. Insert the new wiper blade onto the wiper arm until a click sounds. 4. Rotate the wiper blade so the dimple is in the groove. CAUTION ● After[...]

If the brakes do not operate properly, have the brakes checked by an INFINITI retailer. SELF-ADJUSTING BRAKES Your vehicle is equipped with self-adjusting brakes. The disc-type brakes self-adjust every time the brake pedal is applied. WARNING See an INFINITI retailer for a brake system check if the brake pedal height does not return to normal. BRAK[...]

2. Open the engine hood and remove the cover on the battery and the fuse/fusible link holder. 3. Remove the fuse/fusible link holder cover. 4. Remove the fuse with the fuse puller. 5. If the fuse is open 䊊 A , replace it with a new fuse 䊊 B . Spare fuses are stored in the passenger compartment fuse box. 6. If a new fuse also opens, have the ele[...]

PASSENGER COMPARTMENT CAUTION Never use a fuse of a higher or lower amperage rating than that specified on the fuse box cover. This could damage the electrical system or cause a fire. If any electrical equipment does not operate, check for an open fuse. 1. Be sure the ignition switch is pushed to the OFF or LOCK position and the head- light switch [...]

NOTE: If the extended storage switch malfunctions, or if the fuse is open, it is not necessary to replace the switch. In this case, remove the extended storage switch and replace it with a new fuse of the same rating. How to remove the extended storage switch: 1. To remove the extended storage switch, be sure the ignition switch is in the OFF or LO[...]

See an INFINITI retailer if you need any assis- tance for replacement. FCC Notice: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential in- stallation. This equipme[...]

SEDAN 1. Front turn signal light and clearance light 2. Headlight (high- and low-beam) 3. Front side marker light 4. Map light 5. Rear personal light 6. Fog light 7. Step light 8. High-mounted stop light (on the rear par- cel shelf or in the rear spoiler)* 9. Trunk light 10. License plate light 11. Back-up light 12. Rear combination light (rear tur[...]

COUPE 1. Clearance light 2. Headlight (high- and low-beam) 3. Front turn signal light 4. Map light 5. Fog light 6. Front side marker light 7. Step light 8. High-mounted stop light (on the rear par- cel shelf or in the rear spoiler)* 9. Trunk light 10. License plate light 11. Back-up light 12. Rear combination light (rear turn signal/ tail/stop/side[...]

HEADLIGHTS Replacing Xenon headlight bulb : WARNING HIGH VOLTAGE When xenon headlights are on, they produce a high voltage. To prevent an electric shock, never attempt to modify or disassemble. Al- ways have your xenon headlights replaced at an INFINITI retailer. For additional information, see “HEADLIGHT AND TURN SIGNAL SWITCH” in the “2. In[...]

Coupe Item Wattage (W) Bulb No. Headlight* High/Low beams (xenon) 35 D2S Front turn signal light* 21 WY21W Front fog light* 55 H11 Clearance light* 5 W5W Front side marker light* 5 W5W Rear combination light* back-up 16 W16W turn signal 21 W21W stop/tail/side marker LED — License plate light* 5 W5W Map light 8 — Vanity mirror light 2 — Step l[...]

SDI1679 Map light SDI2508 Rear personal light (Sedan only) SDI2031 Vanity mirror light (Type A) SDI2032 Vanity mirror light (Type B) SDI1839 8-30 Maintenance and do-it-yourself[...]

If you have a flat tire, see “FLAT TIRE” in the “6. In case of emergency” section. TIRE PRESSURE Tire Pressure Monitoring System (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS). It monitors tire pressure of all tires except the spare. When the low tire pressure warning light is lit and the CHECK TIRE PRESSURE[...]

● Before taking a long trip, or whenever you heavily load your vehicle, use a tire pressure gauge to ensure that the tire pressures are at the specified level. ● For additional information regarding tires, refer to “Important Tire Safety Information” (US) or “Tire Safety In- formation” (Canada) in the Warranty Information Booklet. 8-32 [...]

Tire and Loading Information label 䊊 1 Seating capacity: The maximum number of occupants that can be seated in the vehicle. 䊊 2 Vehicle load limit: See “VEHICLE LOADING INFORMATION” in the “9. Technical and consumer informa- tion” section. 䊊 3 Original size: The size of the tires originally installed on the vehicle at the factory. 䊊[...]

Checking the tire pressure 1. Remove the valve stem cap from the tire. 2. Press the pressure gauge squarely onto the valve stem. Do not press too hard or force the valve stem side- ways, or air will escape. If the hissing sound of air escaping from the tire is heard while checking the pressure, reposition the gauge to eliminate this leakage. 3. Rem[...]

Coupe: SIZE COLD TIRE INFLATION PRESSURE FRONT ORIGINAL TIRE P225/ 50R18 94V 230 kPa, 33 PSI P225/ 45R19 92V 240 kPa, 35 PSI 225/45R19 92W 240 kPa, 35 PSI REAR ORIGINAL TIRE P225/ 50R18 94V 230 kPa, 33 PSI P225/ 45R19 92V 240 kPa, 35 PSI 245/40R19 94W 240 kPa, 35 PSI SPARE TIRE T145/ 80D17 420 kPa, 60 PSI T145/ 70R18 420 kPa, 60 PSI TIRE LABELING F[...]

4. R: The “R” stands for radial. 5. Two-digit number (16): This number is the wheel or rim diameter in inches. 6. Two- or three-digit number (94): This number is the tire’s load index. It is a measurement of how much weight each tire can support. You may not find this information on all tires be- cause it is not required by law. 7. H: Tire sp[...]

䊊 5 Maximum load rating This number indicates the maximum load in kilograms and pounds that can be carried by the tire. When replacing the tires on the vehicle, always use a tire that has the same load rating as the factory installed tire. 䊊 6 Term of “tubeless” or “tube type” Indicates whether the tire requires an inner tube (“tube t[...]

Snow tires If snow tires are needed, it is necessary to select tires equivalent in size and load rating to the original equipment tires. If you do not, it can adversely affect the safety and handling of your vehicle. Generally, snow tires will have lower speed ratings than factory equipped tires and may not match the potential maximum vehicle speed[...]

CHANGING WHEELS AND TIRES Tire rotation (Models equipped with same size tires on all wheels) INFINITI recommends rotating the tires every 7,500 miles (12,000 km). (See “FLAT TIRE” in the “6. In case of emer- gency” section for tire replacing proce- dures.) As soon as possible, tighten the wheel nuts to the specified torque with a torque wre[...]

● For additional information regarding tires, refer to “Important Tire Safety In- formation” (US) or “Tire Safety Informa- tion” (Canada) in the Warranty Informa- tion Booklet. 1. Wear indicator 2. Wear indicator location mark Tire wear and damage WARNING ● Tires should be periodically inspected for wear, cracking, bulging or objects ca[...]

Replacing wheels and tires When replacing a tire, use the same size, tread design, speed rating and load carrying capacity as originally equipped. (See “SPECIFICATIONS” in the “9. Technical and consumer information” section for recommended types and sizes of tires and wheels.) WARNING ● The use of tires other than those recom- mended or t[...]

Wheel balance Unbalanced wheels may affect vehicle handling and tire life. Even with regular use, wheels can get out of balance. Therefore, they should be balanced as required. Wheel balance service should be performed with the wheels off the vehicle. Spin balancing the wheels on the vehicle could lead to mechanical damage. For additional informati[...]

9 Technical and consumer information Capacities and recommended fuel/lubricants ........ 9 - 2 Fuel recommendation ........................... 9 - 4 Engine oil and oil filter recommendation ......... 9 - 6 Air conditioning system refrigerant and lubricant recommendations ..................... 9 - 7 Specifications ...................................[...]

The following are approximate capacities. The actual refill capacities may be a little different. When refilling, follow the procedure instructed in the “8. Maintenance and do-it-yourself” section to determine the proper refill capacity. Capacity (Approximate) Recommended specifications US measure Imp measure Liter Fuel 20 gal 16-5/8 gal 76 See[...]

*1: INFINITI recommends Genuine NISSAN Ester Engine Oil available at your INFINITI retailer. *2: For additional information, see “ENGINE OIL” in the “8. Maintenance and do-it-yourself” section for changing engine oil. *3: For additional information, see “ENGINE OIL AND OIL FILTER RECOMMENDATION” later in this section. *4: Using automati[...]

FUEL RECOMMENDATION VQ25HR engine INFINITI recommends the use of unleaded pre- mium gasoline with an octane rating of at least 91 AKI (Anti-Knock Index) number (Research octane number 96). If unleaded premium gasoline is not available, you may use unleaded regular gasoline with an octane rating of at least 87 AKI number (Re- search octane number 91[...]

● If a methanol blend is used, it should contain no more than 5% methanol (methyl alcohol, wood alcohol). It should also contain a suit- able amount of appropriate cosolvents and corrosion inhibitors. If not properly formu- lated with appropriate cosolvents and corro- sion inhibitors, such methanol blends may cause fuel system damage and/or vehic[...]

1. API certification mark 2. API service symbol ENGINE OIL AND OIL FILTER RECOMMENDATION Selecting the correct oil It is essential to choose the correct grade, quality, and viscosity engine oil to ensure sat- isfactory engine life and performance, see “CA- PACITIES AND RECOMMENDED FUEL/LUBRICANTS” earlier in this section. INFINITI recommends th[...]

change the oil before the first recommended change interval. Oil and filter change intervals depend upon how you use your vehicle. Opera- tion under the following conditions may require more frequent oil and filter changes. ● repeated short distance driving at cold out- side temperatures, ● driving in dusty conditions, ● extensive idling, ●[...]

ENGINE Model VQ25HR VQ37VHR Type Gasoline, 4-cycle Gasoline, 4-cycle Cylinder arrangement 6-cylinder, V-slanted at 60° 6-cylinder, V-slanted at 60° Bore × Stroke in (mm) 3.346 × 2.886 (85.0 × 73.3) 3.760 × 3.385 (95.5 × 86.0) Displacement cu in (cm 3 ) 152.31 (2,496) 225.54 (3,696) Firing order 1-2-3-4-5-6 1-2-3-4-5-6 Idle speed rpm No adjus[...]

WHEELS AND TIRES Road wheel Sedan: Type Size Offset in (mm) Conventional 17 × 7-1/2J 1.77 (45) 18 × 7-1/2J 1.77 (45) Front: 18 × 7-1/2J 1.77 (45) Rear: 18 × 8-1/2J 1.97 (50) Spare 17 × 4T 1.18 (30) 18 × 4T 0 (0) Coupe: Type Size Offset in (mm) Conventional 18 × 8J 1.69 (43) Front: 19 × 8-1/2J 1.69 (43) Rear: 19 × 9J 1.77 (45) Spare 17 × 4[...]

Tire Sedan: Type Size Pressure PSI (kPa) [Cold] Conventional P225/55R17 33 (230) P225/50R18 Front: 225/50R18 Rear: 245/45R18 Spare (T-type) T145/80D17 60 (420) T145/70R18 Coupe: Type Size Pressure PSI (kPa) [Cold] Conventional P225/50R18 33 (230) P225/45R19 35 (240) Front: 225/45R19 35 (240) Rear: 245/40R19 Spare (T-type) T145/80D17 60 (420) T145/7[...]

DIMENSIONS in(mm) Sedan: Overall length (with front license plate) 188.1 (4,779) 189.0 (4,800)*10 Overall length (without front license plate) 187.9 (4,773) 189.0 (4,800)*10 Overall width 69.8 (1,773) Overall height 57.2 (1,453)*1*2 57.8 (1,468)*4 Front tread 59.8 (1,520) Rear tread 59.8 (1,520)*2 60.2 (1,530)*1*3*4 Wheelbase 112.2 (2,850) Coupe: O[...]

If you plan to travel in another country, you should first find out if the fuel available is suitable for your vehicle’s engine. Using fuel with too low an octane rating may cause engine damage. All gasoline vehicles must be operated with unleaded gasoline. Therefore, avoid taking your vehicle to areas where appropriate fuel is not available. Whe[...]

[...]

EMISSION CONTROL INFORMATION LABEL The emission control information label is at- tached as shown. TIRE AND LOADING INFORMATION LABEL The cold tire pressure is shown on the Tire and Loading Information label affixed to the pillar as illustrated. AIR CONDITIONER SPECIFICATION LABEL The air conditioner specification label is at- tached as shown. STI04[...]

Use the following steps to mount the license plate: Before mounting the license plate, confirm that the following parts are enclosed in the plastic bag. Only use the recommended mounting position, otherwise the Intelligent Cruise Control (ICC) sensor obstruction (if so equipped) may result. ● License plate bracket ● J-nut × 2 ● Screw × 2 ?[...]

6. Insert a flat-blade screwdriver into the grommet hole to add 90° turn onto the part 䊊 D . 7. Insert a J-nut into the license plate bracket before placing the license plate bracket on the fascia. 8. Install the license plate bracket with screws. 9. Install the license plate with bolts that are no longer than 0.55 in (14 mm). Coupe (except for [...]

COUPE (except for INFINITI Performance Line, Aerodynamic Package models) 1. Park the vehicle on flat, level ground. 2. Locate the center position indicator 䊊 A on the lower part of the grille. Measure straight down from the edge where the bumper and grille meet to the aligning holes 䊊 B , keeping the tape measure lined up with the center positi[...]

COUPE (INFINITI Performance Line, Aerodynamic Package models) 1. Park the vehicle on flat, level ground. 2. Temporarily fit the license plate bracket on the center of the front bumper fascia. 3. For horizontal position adjustment, place and hold the underside tab of the license plate bracket on the front bumper fascia to align the tab’s V notch w[...]

10. Install the license plate bracket with the bolts. 11. Install the license plate with bolts that are not longer than 0.55 in (14 mm). WARNING ● It is extremely dangerous to ride in a cargo area inside the vehicle. In a colli- sion, people riding in these areas are more likely to be seriously injured or killed. ● Do not allow people to ride i[...]

weight of occupants and cargo that can be loaded into the vehicle. If the vehicle is used to tow a trailer, the trailer tongue weight must be in- cluded as part of the cargo load. This information is located on the Tire and Loading Information label. ● Cargo capacity - permissible weight of cargo, the weight of total occupants weight subtracted f[...]

3. Subtract the combined weight of the driver and passengers from XXX kg or XXX lbs. 4. The resulting figure equals the avail- able amount of cargo and luggage load capacity. For example, if the XXX amount equals 1400 lbs. and there will be five 150 lb. passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs. [...]

MEASUREMENT OF WEIGHTS Secure loose items to prevent weight shifts that could affect the balance of your vehicle. When the vehicle is loaded, drive to a scale and weigh the front and the rear wheels separately to determine axle loads. Individual axle loads should not exceed either of the gross axle weight ratings (GAWR). The total of the axle loads[...]

DOT (Department Of Transportation) Quality Grades: All passenger car tires must conform to federal safety requirements in addition to these grades. Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: Treadwear 200 Traction AA Temperature A TREADWEAR The treadwear grade is [...]

Your INFINITI is covered by the following emis- sion warranties. For US: ● Emission Defects Warranty ● Emissions Performance Warranty (See War- ranty Information Booklet for details.) For Canada: Emission Control System Warranty Details of these warranties may be found with other vehicle warranties in your Warranty Infor- mation Booklet (Warran[...]

Additional information concerning mo- tor vehicle safety may be obtained from Transport Canada’s Road Safety Infor- mation Centre at 1-800-333-0371 or on- line at www.tc.gc.ca/roadsafety (English speakers) or www.tc.gc.ca/securiteroutiere (French speakers). To notify INFINITI of any safety concerns please contact our Consumer Informa- tion Centre[...]

This vehicle is equipped with an Event Data Re- corder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situa- tions, such as an air bag deployment or hitting a road obstacle, data that will assist in under- standing how a vehicle’s systems performed. The EDR is designed to record data related to vehicle dynamic[...]

IN THE EVENT OF A COLLISION Unfortunately, accidents do occur. In this un- likely event, there is some important informa- tion you should know. Many insurance compa- nies routinely authorize the use of non-genuine collision parts in order to cut costs, among other reasons. Insist on the use of Genuine INFINITI Collision Parts! If you want your vehi[...]

MEMO 9-28 Technical and consumer information[...]

10 Index A ABS (Anti-lock Braking System) ....... .5-53 Advanced air bag system ........... .1-46 Air bag system Advanced air bag system ......... .1-46 Front passenger air bag and status light ..................... .1-47 Front-seat mounted side-impact supplemental air bag system ...... .1-50 Roof-mounted curtain side-impact supplemental air bag sy[...]

CD/CF/USB memory care and cleaning . . . .4-81 Center multi-function control panel ...... .4-2 Child restraints ................. .1-21 Booster seats ................ .1-36 Installation using LATCH .......... .1-26 Installation using the seat belts ..... .1-30 LATCH system ................ .1-23 Precautions on child restraints ...... .1-21 Top teth[...]

Filter Air cleaner housing filter ......... .8-18 Changing engine oil and filter ...... .8-10 Flashers (See hazard warning flasher switch) ..................... .2-36 Flat tire ...................... .6-2 Flat towing ................... .9-22 Floor mat cleaning ................ .7-5 Fluid Automatic transmission fluid (ATF) .... .8-12 Brake and clut[...]

Interior light control switch .......... .2-53 Interior light replacement ........... .8-28 Interior lights .................. .2-53 Interior trunk lid release ........... .3-20 iPod 姞 player operation ............. .4-71 ISOFIX child restraint ............. .1-23 J Jump starting .................. .6-8 K Keyless entry (See remote keyless entry s[...]

Oil filter replacement indicator ...... .2-22 Operation, Indicators for operation ..... .2-20 Outside air temperature ............ .2-25 Outside mirrors ................. .3-27 Overheat, If your vehicle overheats ..... .6-10 Owner’s Manual/Service Manual order information ................... .9-26 P Panic alarm ................... .3-15 Parking B[...]

Servicing climate control ........... .4-37 SETTING button ................. .4-12 Shift “P” warning (Automatic Transmission models) ..................... .2-20 Shift lock release, Transmission ....... .5-16 Shifting Automatic transmission .......... .5-12 Manual transmission ............ .5-16 Shoulder belt height adjustment ....... .1-19 Slid[...]

Traveling or registering your vehicle in another country ................. .9-12 Trip computer ................. .2-24 Trip odometer ................. .2-24 Trunk Interior trunk lid release ......... .3-20 Light ..................... .2-55 Pass-through ................ .1-12 Trunk lid ................... .3-18 Trunk lid release switch .......... .3[...]